Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM E 1647 : 2016

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Standard Practice for Determining Contrast Sensitivity in Radiology

Available format(s)

Hardcopy , PDF

Superseded date

17-12-2022

Language(s)

English

Published date

11-07-2016

$122.77
Including GST where applicable

Committee
E 07
DocumentType
Standard Practice
Pages
5
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

1.1This practice covers the design and material selection of a contrast sensitivity measuring gauge used to determine the minimum change in material thickness or density that may be imaged without regard to unsharpness limitations.

1.2This practice is applicable to transmitted-beam radiographic imaging systems (film, radioscopy, computed radiography, and digital detector array image detectors) utilizing X-ray and gamma ray radiation sources.

1.3The values stated in inch-pound units are to be regarded as standard. The SI units given in parentheses are for information only.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific safety statements, see NIST/ANSI Handbook 114 Section 8, Code of Federal Regulations 21 CFR 1020.40 and 29 CFR 1910.96.

ASTM E 2445/E2445M : 2014 Standard Practice for Performance Evaluation and Long-Term Stability of Computed Radiography Systems
ASTM E 1411 : 2016 Standard Practice for Qualification of Radioscopic Systems
ASTM E 1734 : 2016 : REV A Standard Practice for Radioscopic Examination of Castings
ASTM E 1931 : 2016 Standard Guide for Non-computed X-Ray Compton Scatter Tomography
ASTM E 1931 : 2016 : R2022 Standard Guide for Non-computed X-Ray Compton Scatter Tomography
ASTM E 2533 : 2021 Standard Guide for Nondestructive Examination of Polymer Matrix Composites Used in Aerospace Applications
ASTM E 2445/E2445M : 2020 Standard Practice for Performance Evaluation and Long-Term Stability of Computed Radiography Systems
ASTM E 2033 : 2017 Standard Practice for Radiographic Examination Using Computed Radiography (Photostimulable Luminescence Method)
ASTM E 1416 : 2016 : REV A Standard Practice for Radioscopic Examination of Weldments

ASTM E 1316 : 2022 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 2002 : 2022 Standard Practice for Determining Image Unsharpness and Basic Spatial Resolution in Radiography and Radioscopy
ASTM E 1411 : 2001 : R2006 Standard Practice for Qualification of Radioscopic Systems
ASTM E 1316 : 2011 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2015 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1255 : 2009 Standard Practice for Radioscopy
ASTM E 1742 : 2000 Standard Practice for Radiographic Examination
ASTM E 1025 : 2011 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology
ASTM E 1316 : 2009 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1734 : 2016 : REV A Standard Practice for Radioscopic Examination of Castings
ASTM E 1316 : 2008 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2010 : REV C Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2020 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2017 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2013 : REV C Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2000 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1255 : 1996 Standard Practice for Radioscopy
ASTM E 1316 : 2019 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2014 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2013 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2018 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2011 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2007 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2015 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2019 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2021 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1025 : 2018 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiography
ASTM E 1316 : 2013 : REV D Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2000 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2019 Standard Terminology for Nondestructive Examinations
ASTM E 2002 : 1998 Standard Practice for Determining Total Image Unsharpness in Radiology
ASTM E 1316 : 2001 Standard Terminology for Nondestructive Examinations
ASTM E 1411 : 1995 Standard Practice for Qualification of Radioscopic Systems
ASTM E 1316 : 2003 Standard Terminology for Nondestructive Examinations
ASTM E 1742 : 2008 : REV A Standard Practice for Radiographic Examination
ASTM E 1316 : 2018 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2006 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2016 Standard Terminology for Nondestructive Examinations
ASTM E 2002 : 1998 : R2003 : EDT 1 Standard Practice for Determining Total Image Unsharpness in Radiology
ASTM E 2002 : 1998 : R2009 Standard Practice for Determining Total Image Unsharpness in Radiology
ASTM E 1316 : 2021 : REV D Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2002 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1734 : 2015 Standard Practice for Radioscopic Examination of Castings
ASTM E 1316 : 2014 : EDT 1 Standard Terminology for Nondestructive Examinations
ASTM E 1025 : 2005 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology
ASTM E 1316 : 2010 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2022 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2013 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2021 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 1742 : 2005 Standard Practice for Radiographic Examination
ASTM E 1411 : 2001 Standard Practice for Qualification of Radioscopic Systems
ASTM E 1025 : 1998 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology
ASTM E 1316 : 2017 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2016 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 2445 : 2005 : R2010 Standard Practice for Qualification and Long-Term Stability of Computed Radiology Systems
ASTM E 1411 : 2016 Standard Practice for Qualification of Radioscopic Systems
ASTM E 1316 : 2009 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2002 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2004 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1734 : 2009 Standard Practice for Radioscopic Examination of Castings
ASTM E 1316 : 2007 : REV C Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2010 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2013 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1411 : 2009 Standard Practice for Qualification of Radioscopic Systems
ASTM E 2002 : 2015 Standard Practice for Determining Total Image Unsharpness and Basic Spatial Resolution in Radiography and Radioscopy
ASTM E 1742 : 2006 Standard Practice for Radiographic Examination
ASTM E 1734 : 1998 Standard Practice for Radioscopic Examination of Castings
ASTM E 1316 : 2021 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2007 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 1734 : 2016 Standard Practice for Radioscopic Examination of Castings
ASTM E 1734 : 2004 Standard Practice for Radioscopic Examination of Castings
ASTM E 1316 : 2005 Standard Terminology for Nondestructive Testing
ASTM E 1316 : 2004 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2021 : REV C Standard Terminology for Nondestructive Examinations
ASTM E 2445 : 2005 Standard Practice for Qualification and Long-Term Stability of Computed Radiology Systems
ASTM E 1316 : 2007 Standard Terminology for Nondestructive Examinations
ASTM E 1255 : 2016 Standard Practice for Radioscopy
ASTM E 1316 : 2012 Standard Terminology for Nondestructive Examinations

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more