ASTM E 1647 : 2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Determining Contrast Sensitivity in Radiology
Available format(s)
Hardcopy , PDF
Superseded date
12-17-2022
Superseded by
Language(s)
English
Published date
07-11-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
E 07
|
| DocumentType |
Standard Practice
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This practice covers the design and material selection of a contrast sensitivity measuring gauge used to determine the minimum change in material thickness or density that may be imaged without regard to unsharpness limitations.
1.2This practice is applicable to transmitted-beam radiographic imaging systems (film, radioscopy, computed radiography, and digital detector array image detectors) utilizing X-ray and gamma ray radiation sources.
1.3The values stated in inch-pound units are to be regarded as standard. The SI units given in parentheses are for information only.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific safety statements, see NIST/ANSI Handbook 114 Section 8, Code of Federal Regulations 21 CFR 1020.40 and 29 CFR 1910.96.
| ASTM E 2445/E2445M : 2014 | Standard Practice for Performance Evaluation and Long-Term Stability of Computed Radiography Systems |
| ASTM E 1411 : 2016 | Standard Practice for Qualification of Radioscopic Systems |
| ASTM E 1734 : 2016 : REV A | Standard Practice for Radioscopic Examination of Castings |
| ASTM E 1931 : 2016 | Standard Guide for Non-computed X-Ray Compton Scatter Tomography |
| ASTM E 1931 : 2016 : R2022 | Standard Guide for Non-computed X-Ray Compton Scatter Tomography |
| ASTM E 2533 : 2021 | Standard Guide for Nondestructive Examination of Polymer Matrix Composites Used in Aerospace Applications |
| ASTM E 2445/E2445M : 2020 | Standard Practice for Performance Evaluation and Long-Term Stability of Computed Radiography Systems |
| ASTM E 2033 : 2017 | Standard Practice for Radiographic Examination Using Computed Radiography (Photostimulable Luminescence Method) |
| ASTM E 1416 : 2016 : REV A | Standard Practice for Radioscopic Examination of Weldments |
| ASTM E 1316 : 2022 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 2002 : 2022 | Standard Practice for Determining Image Unsharpness and Basic Spatial Resolution in Radiography and Radioscopy |
| ASTM E 1411 : 2001 : R2006 | Standard Practice for Qualification of Radioscopic Systems |
| ASTM E 1316 : 2011 : REV B | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2015 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1255 : 2009 | Standard Practice for Radioscopy |
| ASTM E 1742 : 2000 | Standard Practice for Radiographic Examination |
| ASTM E 1025 : 2011 | Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology |
| ASTM E 1316 : 2009 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1734 : 2016 : REV A | Standard Practice for Radioscopic Examination of Castings |
| ASTM E 1316 : 2008 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2010 : REV C | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2020 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2017 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2013 : REV C | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2000 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1255 : 1996 | Standard Practice for Radioscopy |
| ASTM E 1316 : 2019 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2014 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2013 : REV B | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2018 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2011 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2007 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2015 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2019 : REV B | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2021 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1025 : 2018 | Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiography |
| ASTM E 1316 : 2013 : REV D | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2000 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2019 | Standard Terminology for Nondestructive Examinations |
| ASTM E 2002 : 1998 | Standard Practice for Determining Total Image Unsharpness in Radiology |
| ASTM E 1316 : 2001 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1411 : 1995 | Standard Practice for Qualification of Radioscopic Systems |
| ASTM E 1316 : 2003 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1742 : 2008 : REV A | Standard Practice for Radiographic Examination |
| ASTM E 1316 : 2018 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2006 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2016 | Standard Terminology for Nondestructive Examinations |
| ASTM E 2002 : 1998 : R2003 : EDT 1 | Standard Practice for Determining Total Image Unsharpness in Radiology |
| ASTM E 2002 : 1998 : R2009 | Standard Practice for Determining Total Image Unsharpness in Radiology |
| ASTM E 1316 : 2021 : REV D | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2002 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1734 : 2015 | Standard Practice for Radioscopic Examination of Castings |
| ASTM E 1316 : 2014 : EDT 1 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1025 : 2005 | Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology |
| ASTM E 1316 : 2010 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2022 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2013 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2021 : REV B | Standard Terminology for Nondestructive Examinations |
| ASTM E 1742 : 2005 | Standard Practice for Radiographic Examination |
| ASTM E 1411 : 2001 | Standard Practice for Qualification of Radioscopic Systems |
| ASTM E 1025 : 1998 | Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology |
| ASTM E 1316 : 2017 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2016 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 2445 : 2005 : R2010 | Standard Practice for Qualification and Long-Term Stability of Computed Radiology Systems |
| ASTM E 1411 : 2016 | Standard Practice for Qualification of Radioscopic Systems |
| ASTM E 1316 : 2009 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2002 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2004 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1734 : 2009 | Standard Practice for Radioscopic Examination of Castings |
| ASTM E 1316 : 2007 : REV C | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2010 : REV B | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2013 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1411 : 2009 | Standard Practice for Qualification of Radioscopic Systems |
| ASTM E 2002 : 2015 | Standard Practice for Determining Total Image Unsharpness and Basic Spatial Resolution in Radiography and Radioscopy |
| ASTM E 1742 : 2006 | Standard Practice for Radiographic Examination |
| ASTM E 1734 : 1998 | Standard Practice for Radioscopic Examination of Castings |
| ASTM E 1316 : 2021 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2007 : REV B | Standard Terminology for Nondestructive Examinations |
| ASTM E 1734 : 2016 | Standard Practice for Radioscopic Examination of Castings |
| ASTM E 1734 : 2004 | Standard Practice for Radioscopic Examination of Castings |
| ASTM E 1316 : 2005 | Standard Terminology for Nondestructive Testing |
| ASTM E 1316 : 2004 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2021 : REV C | Standard Terminology for Nondestructive Examinations |
| ASTM E 2445 : 2005 | Standard Practice for Qualification and Long-Term Stability of Computed Radiology Systems |
| ASTM E 1316 : 2007 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1255 : 2016 | Standard Practice for Radioscopy |
| ASTM E 1316 : 2012 | Standard Terminology for Nondestructive Examinations |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.