SUBSCRIPTIONS

Terms & Conditions of Sale

The Terms and Conditions relating to subscription products purchased from 29th January 2024 are as outlined below.

You can access the previous Terms and Conditions (for the subscription products purchased prior to January 29th 2024) here.

(Current as at 29 January, 2024)

This agreement made between Intertek Inform and the Customer in relation to the supply of Products comprises the terms and conditions set out:

(a) herein, including the annexures hereto (“Terms And Conditions Of Sale”);

(b) in a Proposal accepted by the Customer (in the event a Proposal has been issued to the Customer); and

(“Agreement”).

The Customer agrees that terms and conditions set out in this Agreement prevail over any other terms that may be communicated by the Customer to Intertek Inform in writing or orally, whether in an order, letter, other document, in negotiations, subsequent to the making of this Agreement or otherwise (“Customer’s Terms”). For the avoidance of doubt, the Customer’s Terms do not apply to the Products offered by Intertek Inform to the Customer pursuant to this Agreement. The Customer further agrees that any subsequent document that purports to incorporate Customer’s Terms so issued by the Customer to Intertek Inform, including but not limited to a purchase order, shall be taken as the Customer’s internal administrative document only and any terms therein shall not be binding on Intertek Inform.

DEFINITIONS

In this Agreement, the following words and phrases with their first letter(s) capitalized shall have the meaning ascribed to them as set out below:

“Charges” means the amount payable by the Customer for a Product as set out in an Invoice;

“Customer” means the purchaser of the Product or the party who has accepted the Proposal and to whom the Invoice is issued;

“Goods” means any publication selected by the Customer specified in an Invoice being:

(a) in paper format;

(b) in paper format as part of a subscription service; or

“i2i Platform” means the software platform housing the Publications and/or Third Party Documents accessed and used by the User via the i2i web portal;

“Intellectual Property” means all current and future registered and unregistered rights, including copyright and trademarks, in respect of the Web Portals, the Service and/or the Publications;

“Intertek Inform” means the relevant Product supplier being either;

SAI Global Australia Pty Ltd ACN 144 974 087 whose registered address is Suite 7.01, Level 7, 45 Clarence St. Sydney NSW 2000 Australia,GPO Box 5420, SYDNEY NSW 2001 or Anstat Pty Ltd ACN 115 133 152 whose registered address is Suite 7.01, Level 7, 45 Clarence St. Sydney NSW 2000 Australia,GPO Box 5420, SYDNEY NSW 2001, Australia or any other related body corporate of and nominated by SAI Global Pty Ltd and whose identity is confirmed on the Invoice or Proposal;
Ili Limited, Company Registration Number: 05605930, whose registered address is Academy Place, 1-9 Brook Street, Brentwood, Essex, CM14 5NQ, United Kingdom; or
ILI Infodisk Inc, Company Registered Number:223278923 Inc, 545 E.Algonquin Road, Arlington Heights IL, 60005 USA

“Invoice” means the online or paper form which may include the following information:

(a) the Customer’s Details;

(b) the Product(s) selected by the Customer, including any specific or optional features selected by the Customer;

(d) the Charges for the Product(s) selected by the Customer, inclusive of any GST, delivery charges and insurance (If applicable);

(e) the Subscription Date; and

(f) where the Product is Goods, a delivery address.

“Minimum System Requirements” means current and previous major releases of Internet Explorer, Firefox and/or Safari browsers and/or the current version of Chrome browser, as updated by the relevant provider from time to time. Any browser that is no longer supported by the provider shall be deemed not to meet the Minimum System Requirements;

“Product” means a Service or Goods;

“Product Description” means the description of each Product as set out in a Proposal or otherwise provided by Intertek Inform or available on the relevant Intertek Inform website, from time to time;

“Proposal” means a proposal delivered by Intertek Inform to a potential Customer who is seeking to purchase a Product;

“Publication” means standards and other publications and related material and content for which Intertek Inform is an authorised distributor for and as specified in the Proposal;

“Publication Connection” means the links and other cross referencing functionality created by the User in respect of the documents and/or Publications;

“SA Licensed Material” means those standards and other publications and related material and content that Standards Australia has licensed Intertek Inform to distribute or resell;

“Service” means an online subscription service using Intertek Inform’s Standards On-Line or i2i Platform web portals to access the Publications as selected by the Customer and as specified in an Invoice or as accepted by the Customer pursuant to a Proposal and as described in the Product Description;

“Standards Australia” means Standards Australia Limited ABN 85 087 326 690 the owner, publisher and / or licensor of SA Licensed Material;

“Standards On-Line” means the software platform housing the Publications accessed and used by the User via the Standards On-Line web portal;

“Subscription Date” means the date from which a Service or a subscription for a Good is provided by Intertek Inform, which may be stated on the Invoice, or any anniversary of that date;

“Subscription Period” means: (i) the term outlined and accepted by the Customer pursuant to the Proposal and/or as described in the Product Description; or (ii) where no such term is specified, the twelve (12) month period beginning on a Subscription Date;

“Third Party Document” means a document (other than a Publication) uploaded onto the i2i Platform by the User;

“User” means each user of the Web Portals and or each user who accesses of any Publication who has been so authorised by Intertek Inform or by the Customer or any associate of the Customer as set out in the Proposal; and

“Web Portals” means Standards On-Line and i2i Platform web portals.

SERVICES

2.1 In consideration of payment of the Charges in full, Intertek Inform hereby grants to the Customer the non-exclusive, non-transferrable right for the duration of the then current Subscription Period to:

(a) use and access the Service listed in an Invoice or a Proposal that has been accepted by the Customer;

(b) access the Publication via the Service; and

(c) use the Publication obtained via the Service in accordance with the Product Description, on the applicable terms and conditions set out in this Agreement.

2.2 In the event the Customer and/or User accesses the Web Portals, the Customer and/or User agrees to the terms set out in Annexure A. Where the Customer and/or User accesses the Publication though the i2i Platform and/or using the functionalities of the i2i Platform, the Customer and/or User also agrees to the terms set out in Annexure B.

2.3 Where the Customer and/or User accesses SA Licensed Material, the Customer and/or User agrees to the terms set out in Annexure C.

2.4 Subject to any variation as set out in a Proposal, the rights granted under clause 2.1 are for the Customer’s internal business purposes only, and shall not extend to:

(a) any related body corporate or affiliate of the Customer;

(b) any shareholder of the Customer;

(d) any member and/or subscriber of the Customer, where the Customer is a membership or subscription organisation; or

(e) any incorporated or unincorporated joint venture entity of which the Customer is a participant.

For the avoidance of doubt, this means that each party that has its own Australian Business Number and/or operates in a jurisdiction different to that of the Customer or who is not an employee of the Customer needs to be separately licenced to use the rights granted under clause 2.1.

2.5 The Customer shall keep any usernames and passwords confidential and will not disclose them to any persons that are not current employees and/or officers of the Customer and shall use all reasonable efforts to prevent any unauthorised access to the Service(s) and/or use of the Publication and, in the event of such unauthorised access, shall immediately notify Intertek Inform.

2.6 Except as permitted under this Agreement, the Customer shall not:

(a) attempt to copy, modify, duplicate, create a derivative work from, republish, adapt all or any part of the Products and/or the Publication;

(b) reverse engineer, reverse compile or disassemble any or part of the Service(s);

(c) access all or part of the Service(s) in any way in order to build a product or service which competes with the Service(s);

(d) licence, sell, rent, lease, transfer, assign, distribute, display, disclose or otherwise commercially exploit or make the Service(s) and/or Publication available to any third parties;

(e) attempt to obtain, or assist a third party to obtain access to the Service and/or Publication other than as expressly provided in this clause 2;

(f) distribute or share copies of the Goods, Products and/or the Publication with any third party or embed or copy any part of the Goods, Products and/or the Publication into any document that may be accessed by or distributed to any third party; and

(g) assemble a reference collection of the Goods, Products and/or the Publication by accumulating or compiling more than 10% of publications that may be derived from Goods, Products and/or the Publication in hard copy or other electronic format.

2.7 Intertek Inform may suspend access to a Service to fix any faults, defects or other irregularities in the Service and shall, if practicable use its reasonable efforts to give the Customer at least 2 hours notice in advance of such suspension.

2.8 Intertek Inform shall have no liability for the Customer’s inability to use and access any Services or download any PDFs caused by the failure of the Customer’s computer and telecommunications (including its Internet service and browser) systems to meet the Minimum System Requirements.

GOODS

3.1 In consideration of payment of the Charges in full, Intertek Inform will supply and deliver the Goods listed in an Invoice or a Proposal that has been accepted by the Customer on the applicable terms and conditions of this Agreement.

3.2 Intertek Inform will provide the Customer with an estimated date of delivery, which is its best estimate, but may be subject to change without notice.

3.3 Intertek Inform will deliver the Goods to the delivery address provided by the Customer in the Invoice or, if Intertek Inform otherwise agrees to any other Australian address notified to Intertek Inform in writing.

3.4 Intertek Inform shall deliver the Goods via a reputable third party courier service or via the postal service and therefore accepts no responsibility or liability for any loss or damage to the Goods once provided to the courier or postal service.

3.5 Intertek Inform shall retain ownership of the Goods and the Customer shall be responsible for maintaining the Goods in a fit, re-saleable and merchantable condition until such time as Intertek Inform receives full payment of the Charges in cleared funds.

3.6 The supply of Goods by Intertek Inform under this Agreement, including where delivered on-line as a PDF download, does not confer on the Customer any rights whatsoever in the intellectual property rights contained in those Goods, and sub-clauses 2.4(a) and (d) shall apply.

3.7 In relation to Goods that are not provided for a Subscription Period, the Customer may cancel an order within 30 days of the date of the Invoice, provided that, the Goods are returned to Intertek Inform at the Customer’s cost in a fit, re-saleable and merchantable condition. Intertek Inform will inspect the condition of any such returned goods and provide a refund, provided that, the terms and conditions of this clause 3.7 have been strictly complied with.

PROPRIETARY RIGHTS

4.1 The Customer acknowledges that this Agreement grants no rights, title or interest in any such intellectual property rights to the Customer in the Publication of any of the Products, other than as expressly set out in this Agreement.

4.2 The Customer hereby agrees to comply with any copyright notices related to the Products received and shall not remove any copyright notices or other intellectual property rights notices.

4.3 The Customer acknowledges that certain Customer information may be incorporated into documents, reports and/or other intellectual property material generated or developed by Intertek Inform (“Data”) in a non-identifiable manner in the course of providing or arising from the provision of the Services. To the extent that there is Data and that Data is owned by the Customer, the Customer grants to Intertek Inform a perpetual, non-exclusive, royalty-free licence to use the Data as part of its business processes provided that Intertek Inform does not identify the Customer nor breach any applicable privacy obligations nor compromise, prejudice or otherwise damage the Customer’s business and/or intellectual property rights from a commercial or financial perspective.

4.4 The Customer acknowledges that the information and other commercial terms (“Confidential Information”) set out in the Proposal are proprietary to Intertek Inform and have been provided to the Customer on a commercial-in-confidence basis. The Customer further acknowledges that the Confidential Information is valuable to Intertek Inform and the disclosure thereof may cause damage to Intertek Inform. Accordingly, the Customer warrants it will keep confidential and not disclose the Confidential Information to any other party. The Customer agrees that, in the event it breaches this non-disclosure obligation, Intertek Inform may, at its sole discretion, immediately suspend and/or terminate this Agreement and the Customer shall not be entitled to any refund of Charges related to the unexpired portion of the Subscription Period nor claim against Intertek Inform for any loss it suffers as a result of it not being able to use the Service.

LIABILITY

5.1 Unless otherwise indicated, this clause 5 sets out the entirety of Intertek Inform’s liability to the Customer and in relation to the Customer’s use or inability to use the Products provided under this Agreement.

5.2 The Customer shall immediately inform Intertek Inform if it becomes aware of any unauthorised use of any of the intellectual property rights in any Products or Publication received by the Customer under this Agreement, and shall provide Intertek Inform with any reasonable assistance in relation to taking action against any such unauthorised use, provided that, Intertek Inform shall re-imburse the Customer for its reasonable costs and expenses incurred in providing such assistance.

5.3 Intertek Inform warrants exclusively to the Customer that the Services will be performed in a manner consistent with that level of care and skill ordinarily exercised by other companies providing like services under similar circumstances. In the event of a breach of the warranty set out in Clause 5.3, Intertek Inform shall, at its own expense, perform services of the type originally performed as may be reasonably required to correct any defect in Intertek Inform’s performance.

5.4 To the fullest extent possible by law, and except where expressly indicated in this Agreement, Intertek Inform expressly and impliedly excludes any and all liability under this Agreement and makes no warranties, guarantees, representations or indemnities in relation to the Products and/or the Publication provided under this Agreement.

5.5 Either Party expressly and impliedly excludes any liability for: indirect loss; consequential loss; loss of goodwill; loss of opportunity; loss of business; or loss of profit, whether arising in contract, tort (including negligence, misrepresentation or breach of statutory duty), as a result of:

(a) breach of this Agreement or arising as a result of the information contained in a Product; or

(b) arising as a result of the suspension or termination of any of the Products, whether or not arising from Intertek Inform’s exercise of its rights and obligations under this Agreement, including, to conduct maintenance, in accordance with this Agreement.

5.6 Intertek Inform’s total aggregate liability to the Customer under this Agreement shall not exceed an amount that is equal to the Charges in relation to the Product(s) to which the liability relates.

PAYMENT, TERMINATION AND RENEWAL

6.1 Unless paid in full in cleared funds prior to delivery or prior to the Subscription Date, the Customer will pay any Invoices in full within 30 days from the date of that Invoice. All Charges are subject to GST at the then prevailing rate for Products purchased.

6.2 Intertek Inform may, without cause, terminate this Agreement by giving the Customer 30 days notice, provided that it refunds the Customer on a pro-rata basis any Charges for any remaining unused Subscription Period at the end of the 30 day notice period.

6.3 The Customer may terminate this Agreement immediately upon a material breach by Intertek Inform of this Agreement.

6.4 All Products provided for a Subscription Period will continue to be provided for a subsequent Subscription Period unless cancelled by one Party giving the other Party notice in writing not less than 60 days before the end of the then current Subscription Period.

6.5 This Agreement terminates at the conclusion of the current Subscription Period if the Subscription Period is cancelled pursuant to clause 6.4.

6.6 Intertek Inform may terminate this Agreement:

(a) immediately upon a material breach by the Customer of this Agreement;

(b) failure of the Customer to pay any Invoices within 30 days of the date of the Invoice.

6.7 Upon termination or expiration of this Agreement, the Customer shall:

(a) immediately cease any and all use of the Service(s) and/or Publication subject to any usage rights under the Product Description and shall cease to receive any Goods provided for a Subscription Period; and

(b) remove, destroy or delete all printed or downloaded electronic copies of any Publication held by the Customer.

6.8 To ensure compliance with clause 6.7, Intertek Inform may:

(a) require the Customer, at its own cost, to provide a certificate that removal or destruction has occurred; or

(b) appoint an auditor to verify the removal, destruction or deletion of the printed or downloaded electronic copies of any Publication. The Customer agrees that the auditor shall be entitled, at all reasonable times during normal business hours of the Customer and upon reasonable notice, to audit the Customer’s internal processes and inspect and take copies any records and documents of the Customer, its agents or subcontractors relating to the performance of its obligations under this Agreement.

PRIORITY

7.1 If there is inconsistency between any provisions set out the documents forming part of this Agreement, the provisions in those documents will be interpreted in the following order of priority to the extent of any inconsistency:

(a) Proposal;

(b) Invoice; and

and for the avoidance of doubt, if there is inconsistency between terms relating to a Product set out in a Proposal and in a Product Description out elsewhere (for example on Intertek Inform’s website), the terms relating to a Product set out in a Proposal prevail to the extent of the inconsistency.

PERSONAL INFORMATION AND PRIVACY POLICY

8.1 The Customer acknowledges that:

(a) Intertek Inform may collect personal information (as defined in the Privacy Act 1988 (Cth) and similar legislation of the Commonwealth and the States and Territories of the Commonwealth);

(b) if Intertek Inform does collect personal information, the collection of such information shall be in accordance with its Privacy Policy (as set out on its website at Privacy Policy); and

ANTI-BRIBERY

9.1 The Customer agrees that:

(a) it shall not commit, authorise or permit any action which would cause Intertek Inform and/or Intertek Inform’s affiliates to be in violation of any applicable anti-bribery laws or regulations;

(b) this obligation applies in particular to illegal payments to government officials, representatives of public authorities or their associates, families or close friends; and

(c) it will never offer or give, or agree to give, to any employee, representative or third party acting on Intertek Inform’s behalf nor accept, or agree to accept from any employee, representative or third party acting on Intertek Inform’s behalf, any gift or benefit, be it monetary or otherwise, that could breach any law or policy applicable to Intertek Inform.

9.2 The Customer will notify Intertek Inform immediately if it:

(a) becomes aware;

(b) has reason to believe; or

(c) has any specific suspicion that there has been or will be a breach of clause 9.1 or there was corruption involved with regard to the negotiation, conclusion or performance of this Agreement `

9.3 Any breach of clause 9.1 by the Customer, its employees, agents or sub-contractors (whether with or without the knowledge of the Customer) will be deemed a material breach of this Agreement, and will entitle Intertek Inform to recover from the Customer the amount of any loss resulting from such material breach and to recover from the Customer the amount or value of any such gift, consideration or commission.

9.4 The Customer acknowledges that it has read a copy of Intertek Inform’s Whistleblowing Policy (as set out on its website at SAI Governance Policies) including reporting hotline procedures and communicated the same to its relevant employees, agents and contractors.

MISCELLANEOUS

10.1 The Customer may not assign, transfer, pledge or otherwise encumber this Agreement and any such attempt by the Customer to assign this Agreement shall be null and void and confer on the assignee no rights to use the Service(s) and/or Publication.

10.2 Intertek Inform may, in its absolute discretion, assign this Agreement to any party without notice.

10.3 A party’s failure to insist upon strict performance of any of the provisions of this Agreement shall not be construed as a waiver or relinquishment of that right or of that party’s right to assert or rely upon the provisions of this Agreement. Any waiver of a provision of this Agreement shall not be effective unless made in writing and properly executed by the waiving party.

10.4 Unless specifically provided otherwise, rights arising under this Agreement do not preclude rights at general law.

10.5 This Agreement and any documents expressly incorporated by reference into this Agreement as part of this Agreement, represent the entire agreement between the parties in relation to the Products and/or the provision of the Publication by Intertek Inform.

10.6 If any provision of this Agreement is found to be fully or partially invalid or unenforceable it shall be deemed to be deleted from this Agreement, and the remainder of this Agreement, to the extent permissible shall be valid and binding as if such provisions were not previously included in this Agreement.

10.7 Intertek Inform shall have no liability to the Customer under this Agreement if it is prevented from or delayed in performing its obligations under this Agreement, or from carrying on its business, by acts, events, omissions or accidents beyond its reasonable control, including, without limitation, strikes, lock-outs or other industrial disputes (whether involving the workforce of Intertek Inform or any other party), failure of a utility service including transport or telecommunications services, act of God, war, riot, civil commotion, malicious damage, compliance with any law or governmental order, rule, regulation or direction, accident, breakdown of plant or machinery, fire, flood, storm or default of suppliers or sub-contractors. Intertek Inform shall use its reasonable efforts to notify the Customer of such an event and its expected duration.

10.8 Any notice required to be given under this Agreement to Intertek Inform shall be in writing and shall be delivered by email, hand or sent by pre-paid first-class post or recorded delivery post to the other party at its address set out in this Agreement, or such other address, including email address, as may have been notified by that party for such purposes, or sent by fax to the other party's fax number as set out in the Invoice.

10.9 The Customer acknowledges and agrees that the Charges and other pricing information pertaining to the Services (Pricing Data) are commercial-in-confidence and remain the property of Intertek Inform. The Customer warrants it will not disclose Pricing Data to any third party without the prior written permission of Intertek Inform.

10.10 Notwithstanding termination of this Agreement, the following clauses shall survive termination of this Agreement: clauses 1 (to the extent necessary to interpret any of the following clauses), 2.4, 4, 5, 6.6, 6.7, 7 and 10.9 (inclusive).

10.11 This Agreement shall be governed by and construed under the laws and regulations of New South Wales and the exclusive jurisdiction of the courts of New South Wales.

ANNEXURE A

The Customer and/or User acknowledges that:

(a) it does not own the electronic downloaded files, printed files, any disks, documentation or manuals on which the Service or Intellectual Property is originally or subsequently recorded or fixed;

(b) it may use the electronic or printed files to obtain information contained in them for its internal business purposes only (and in accordance with clause 2.2 of the Terms and Conditions of Sale);

(c) no promise, representation, warranty or undertaking (other than any contained in this Agreement) has been given by Intertek Inform or any person on its behalf in relation to the profitability of or any other consequences or benefits to be obtained from the use of the Service and the Customer relies wholly on its own skill and judgment in deciding to use the Service;

(d) no warranty or representation is made by Intertek Inform or any party connected with this Service, express or implied, with regard to the quality, utility, completeness or accuracy of the Service;

(e) the licence to use the Service terminates upon termination or expiry of this Agreement;

(f) not to use the Service or Web Portals to combine with any other information with the object of offering it on line or in any manner to third parties;

(g) all rights, title and interest (including the intellectual property rights) in the Web Portals as well as the i2i Platform shall at all times be and remain the property of Intertek Inform and/or its related bodies corporate and the Customer shall not acquire any right, title or interest in the same;

(h) Intertek Inform reserves the right at any time to make changes to either of the Web Portals without notice to the Customer;

(i) Intertek Inform does not warrant that

(i) access to either of the Web Portals will be uninterrupted or error free; and

(ii) functionalities of the Web Portals meet the Customer’s requirements;

and

(j) except for liability that by law (including without limitation by the Competition and Consumer Act 2010) cannot be limited, Intertek Inform liability to the Customer for any reason, including breach of this Agreement, however arising (including for negligence) is limited, at the option of Intertek Inform, to either resupplying the Product or the payment of the cost of having the Product supplied again.

The Customer or User may download and store electronic copies for temporary off-line uses.

In event that you are accessing the Product through Intertek Inform’s Standards On-Line, the User acknowledges that downloaded copies of Standards are encoded with a predetermined expiry date, after which they cease to be accessible.

In addition to the prohibitions set out in clause 2.2 in the main body of this Terms and Conditions of Sale, the Customer or User agrees that:

(a) it will not challenge or call into question Intertek Inform’s rights to and/or ownership of Intellectual Property rights;

(b) must not reproduce documents or portions of documents provided by this Service other than in accordance with the terms of this Agreement; and

(c) it must not use the functionalities of the Web Portals and/or the Service in a manner or associated with material that would damage the reputation or goodwill of Intertek Inform or the respective owners of the Intellectual Property.

ANNEXURE B – Use of i2i Platform
1.Customer’s use of i2i Platform

The i2i Platform has been provided by Intertek Inform to assist the User to upload Third Party Documents and create Publication Connections.

The User warrants that it:

(a) will not misuse the i2i Platform or Third Party User’s Publication or use i2i Platform or Third Party Documents in a manner contrary to the terms and conditions of this Agreement;

(b) has the authority and/or right to upload Third Party Documents onto the i2i Platform;

(c) has the authority and/or right to configure the i2i Platform and create Publication Connections to or with Third Party Documents; and

(d) is solely responsible for any liability or loss arising from it using the functionalities of the i2i Platform, other than in respect of liability that Intertek Inform cannot exclude by operation of law (including without limitation by the Competition and Consumer Act 2010 (Cth)) and releases Intertek Inform from any claim it may have or damage it may suffer as a result of it using the i2i Platform.

Customer’s rights & obligations

The Customer acknowledges and agrees:

(a) not to access the i2i Platform from any terminal or location which has not been included in the number of network users or authorised entities given to Intertek Inform by the Customer in order to determine the price of the Subscription;

(b) that the maximum number of Users that it authorises to access and use the i2i Platform shall not exceed the number of Users’ access rights it has purchased from time to time;

(c) Intertek Inform takes no responsibility for any incorrect Publication Connection or corruption or the malfunctioning of any document arising from creating any Publication Connection;

(d) Intertek Inform shall not be obliged to assist the User recover or otherwise replace any document or Publication that has been corrupted or malfunctions as a result of the User creating a Publication Connection thereinto;

(e) Intertek Inform may, from time to time, review any uploaded Third Party Document to determine whether it is illegal or violates its policies and may remove or refuse to display such document that it reasonably believes violates its policies or the law or block the User’s access to the i2i Platform. However, this does not necessarily mean that it reviews uploaded Third Party Documents as a matter of course and the User should not assume that Intertek Inform does in fact review such documents. Any inaction on the part of Intertek Inform does not mean it has waived its rights under this paragraph (e) and it shall continue to be entitled to exercise such rights at any future time; and

(f) Intertek Inform may, at its discretion, add or remove functionalities or features pertaining to i2i Platform at any time without notice.

ANNEXURE C – Accessing SA Licensed Material

(a) The Customer further acknowledges and agrees that Standards Australia may change the SA Licensed Material at any time, including by:

(i) changing the catalogue entry of SA Licensed Material, including the generic title of SA Licensed Material;

(ii) adding or withdrawing SA Licensed Material; or

(iii) reconfirming, revising, making obsolescent or otherwise amending the content or changing the classification of SA Licensed Material;

(b) If an item of SA Licensed Material is distributed to the Customer in Single User Electronically Communicated PDF (being a single copy of a PDF file provided by Standards Australia configured for use by a single user) via a subscription, the Customer is granted a non-exclusive, non-transferrable, non-sublicensable, limited licence, for the duration of the subscription agreement, to access the item on the number of devices by the number of Customer’s Users, with the right to print the item, with the right to add notes to the item, with the right to save the item to one device, and without the right to copy the whole or any part of the item except to exercise the rights as specifically conferred above.

(c) The Customer may not sell, share, rent, lease or otherwise provide access to the subscription and the SA Licensed Material or the Customer's login credentials to any individual or organisation other than the Customer's Users.

(d) The Customer must implement authentication processes to ensure that access to SA Licensed Material is limited to the Customer's Users.

(e) The Customer must ensure that the number of the Customer's Users accessing the subscription at the same time does not exceed the number of users permitted under the subscription agreement.

(f) The Customer must keep its Users' relevant authentication information confidential and safe from access by unauthorised users.

(g) The Customer agrees that:

(i) Standards Australia and its licensors are, and will remain, the owners of all Intellectual Property rights in the SA Licensed Material;

(ii) the Customer must not remove, alter or obscure any ownership, copyright, trade mark, confidentiality or other marks or legends (including any digital watermark or other digital rights management tool) on or in the SA Licensed Material;

(iii) the Customer will protect the security of the SA Licensed Material in its possession and preserve the SA Licensed Material and Standards Australia's Intellectual Property rights; and

(iv) the Customer must ensure that the User complies with the initial subscription terms.

(h) The Customer shall not loan, sell, rent, lease, reproduce, or otherwise distribute any of the SA Licensed Material obtained through the subscription, in any format, by electronic mail or other means, to any individual or organisation other than the Customer’s User, without the prior written permission of Standards Australia.

(i) Each Customer’s User must be a natural person. If a User changes his/her role or ceases employment with the Customer, then the Customer may substitute another natural person as the relevant User. The Customer must not otherwise change Users or permit any sharing of a User's access rights.

(j) Without limiting the restrictions above, the Customer shall not reproduce or communicate material from SA Licensed Material other than for the Customer's internal business purposes (excluding the business purposes of the Customer's related entities, associates, shareholders and subcontractors).

(k) The Customer consents to Standards Australia sending the Customer communications, including 'commercial electronic messages' (as that term is defined in the Spam Act 2003 (Cth)), via emails, text messages or phone calls, which Standards Australia will send to the contact details the Customer provides to Intertek Inform when purchasing a licence to SA Licensed Material, when purchasing a subscription, when creating an account on Intertek Inform's Web Portal or platform, or as the Customer otherwise updates from time to time

(l) Intertek Inform holds the benefit of these terms on trust for Standards Australia and may enforce these terms on Standards Australia's behalf and for Standards Australia's benefit.

(m) The Customer acknowledges the digital rights management settings with respect to SA Licensed Material to be as follows:

(i) printing permission: unlimited printing permitted;

(ii) Edit notes: users are permitted to add notes to the PDF;

(iii) Copy: users may not copy/cut and paste from a document;

(iv) Save: users are permitted to save the document to their local machine only. If the Publication is sent to another machine, it will not open; and

(v) Watermark: documents are watermark every page with the buyer name, date of purchase and a notation that reproduction, distribution, and storage or use on a network is prohibited.