SSPC-GUIDE 15 : 2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
FIELD METHODS FOR EXTRACTION AND ANALYSIS OF SOLUBLE SALTS ON STEEL AND OTHER NONPOROUS SUBSTRATES
Hardcopy , PDF
08-31-2024
English
01-01-2013
1. Scope
2. Description and Use
3. Referenced Standards
4. Field Methods Measuring Total Soluble Salts by
Conductivity
5. FIELD METHODS MEASURING SPECIFIC IONS
6. Laboratory Reference Methods
APPENDIX A - CONVERSIONS
APPENDIX B - DETERMINING EQUIVALENT SURFACE CONCENTRATION
FROM CONDUCTIVITY
APPENDIX C - DISCUSSION AND SOURCES ON EXTRACTION EFFICIENCY
APPENDIX D - SOURCES OF TESTING EQUIPMENT AND SUPPLIES
Specifies the most commonly used field methods for the retrieval and analysis of soluble salts on steel and other nonporous substrates.
DevelopmentNote |
Supersedes SSPC-TU 4. (07/2012)
|
DocumentType |
Standard
|
Pages |
17
|
PublisherName |
The Society for Protective Coatings
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
SSPC-SP WJ 3 : 2012 | WATERJET CLEANING OF METALS - THOROUGH CLEANING |
SSPC-SP 5 (WAB) : 2015 | WHITE METAL WET ABRASIVE BLAST CLEANING (SSPC-SP 5 (WAB)/NACE WAB-1) |
API 652 : 2014 | LININGS OF ABOVEGROUND PETROLEUM STORAGE TANK BOTTOMS |
SSPC-SP 7 (WAB) : 2015 | BRUSH-OFF WET ABRASIVE BLAST CLEANING (SSPC-SP 7 (WAB)/NACE WAB-4) |
13/30285580 DC : 0 | BS EN ISO 16961 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL PROTECTIVE COATING AND LINING OF ABOVE GROUND STEEL STORAGE TANKS |
NACE WJ 3 : 2012 | WATERJET CLEANING OF METALS - THOROUGH CLEANING |
SSPC-SP 10 (WAB) : 2015 | NEAR-WHITE METAL WET ABRASIVE BLAST CLEANING (SSPC-SP 10 (WAB)/NACE WAB-2) |
NACE 12/AWS C2.23M/SSPC CS- 23 : 2016 | SPECIFICATION FOR THE APPLICATION OF THERMAL SPRAY COATINGS (METALLIZING) OF ALUMINUM, ZINC, AND THEIR ALLOYS AND COMPOSITES FOR THE CORROSION PROTECTION OF STEEL |
CSA Z245.30 : 2014 | FIELD-APPLIED EXTERNAL COATINGS FOR STEEL PIPELINE SYSTEMS |
NACE SP 08 15 : 2015 | COMMERCIAL WET ABRASIVE BLAST CLEANING (SSPC-SP 6 (WAB)/NACE WAB-3) |
NACE 3 : 2007 | COMMERCIAL BLAST CLEANING |
NACE 2 : 1994 : R1999 | NEAR-WHITE METAL BLAST CLEANING |
NACE WJ 1 : 2012 | WATERJET CLEANING OF METALS - CLEAN TO BARE SUBSTRATE |
ASTM D 7602 : 2011 : R2017 | Standard Practice for Installation of Vulcanized Rubber Linings |
SSPC-SP WJ 4 : 2012 | WATERJET CLEANING OF METALS - LIGHT CLEANING |
ASTM D 7602 : 2011 | Standard Practice for Installation of Vulcanized Rubber Linings |
NACE WJ 3 CHINESE : 2012 | WATERJET CLEANING OF METALS - THOROUGH CLEANING (WJ-3) |
NACE SP 02 95 : 2008 | APPLICATION OF A COATING SYSTEM TO INTERIOR SURFACES OF NEW AND USED RAIL TANK CARS |
NACE 6G186 : 0 | SURFACE PREPARATION OF SOLUBLE SALT CONTAMINATED STEEL SUBSTRATES PRIOR TO COATING |
NACE 4 : 2007 | BRUSH-OFF BLAST CLEANING |
NACE 1 : 1994 : R2006 | WHITE METAL BLAST CLEANING |
NACE WJ 2 CHINESE : 2012 | WATERJET CLEANING OF METALS - VERY THOROUGH CLEANING |
SSPC-SP 14 (WAB) : 2015 | INDUSTRIAL WET ABRASIVE BLAST CLEANING (SSPC-SP 14 (WAB)/NACE WAB-8) |
API RP 652 : 2020 | LININGS OF ABOVEGROUND PETROLEUM STORAGE TANK BOTTOMS |
16/30278559 DC : 0 | BS ISO 18796-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF CARBON STEEL PROCESS VESSELS - PART 1: TECHNICAL REQUIREMENTS |
NACE SP 10 15 : 2015 | BRUSH-OFF WET ABRASIVE BLAST CLEANING (SSPC-SP 7 (WAB)/NACE WAB-4) |
SSPC-SP WJ 2 : 2012 | WATERJET CLEANING OF METALS - VERY THOROUGH CLEANING |
BS EN ISO 16961:2015 | Petroleum, petrochemical and natural gas industries. Internal coating and lining of steel storage tanks |
SSPC-PA GUIDE 13 : 2006 | GUIDE SPECIFICATION FOR APPLICATION OF COATING SYSTEMS WITH ZINC-RICH PRIMERS TO STEEL BRIDGES |
NACE WJ 1 CHINESE : 2012 | WATERJET CLEANING OF METALS - CLEAN TO BARE SUBSTRATE |
NACE WJ 4 CHINESE : 2012 | WATERJET CLEANING OF METALS - LIGHT CLEANING |
SSPC-SP WJ 1 : 2012 | WATERJET CLEANING OF METALS - CLEAN TO BARE SUBSTRATE |
NACE SP 06 15 : 2015 | NEAR-WHITE METAL WET ABRASIVE BLAST CLEANING (SSPC-SP 10 (WAB)/NACE WAB-2) |
NACE 12 : 2003 | SPECIFICATION FOR THE APPLICATION OF THERMAL SPRAY COATINGS (METALLIZING) OF ALUMINUM, ZINC, AND THEIR ALLOYS AND COMPOSITES FOR THE CORROSION PROTECTION OF STEEL |
SSPC-SP 6 (WAB) : 2015 | COMMERCIAL WET ABRASIVE BLAST CLEANING (SSPC-SP 6 (WAB)/NACE WAB-3) |
ISO 16961:2015 | Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel storage tanks |
EN ISO 16961:2015 | Petroleum, petrochemical and natural gas industries - Internal coating and lining of steel storage tanks (ISO 16961:2015) |
API 652 CHINESE : 2014 | LINING OF ABOVEGROUND PETROLEUM STORAGE TANK BOTTOMS |
NACE SP 07 15 : 2015 | WHITE METAL WET ABRASIVE BLAST CLEANING (SSPC-SP 5 (WAB)/NACE WAB-1) |
NACE WJ 2 : 2012 | WATERJET CLEANING OF METALS - VERY THOROUGH CLEANING |
AWS C2.23M/C2.23 : 2003 | SPECIFICATION FOR THE APPLICATION OF THERMAL SPRAY COATINGS (METALLIZING) OF ALUMINUM, ZINC, AND THEIR ALLOYS AND COMPOSITES FOR THE CORROSION PROTECTION OF STEEL |
NACE SP 03 02 : 2007 | SELECTION AND APPLICATION OF A COATING SYSTEM TO INTERIOR SURFACES OF NEW AND USED RAIL TANK CARS IN MOLTEN SULFUR SERVICE |
NACE SP 03 86 : 2007 | APPLICATION OF A COATING SYSTEM TO INTERIOR SURFACES OF COVERED STEEL HOPPER RAIL CARS IN PLASTIC, FOOD, AND CHEMICAL SERVICE |
NACE 1 : 1994 : R1999 | WHITE METAL BLAST CLEANING |
NACE 2 : 1994 : R2006 | NEAR-WHITE METAL BLAST CLEANING |
NACE SP 09 15 : 2015 | INDUSTRIAL WET ABRASIVE BLAST CLEANING (SSPC-SP 14 (WAB)/NACE WAB-8) |
NACE No. 8/SSPC-SP 14:2007 | INDUSTRIAL BLAST CLEANING |
I.S. EN ISO 16961:2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF STEEL STORAGE TANKS (ISO 16961:2015) |
NACE WJ 4 : 2012 | WATERJET CLEANING OF METALS - LIGHT CLEANING |
NACE SP0386:2022 | Application of a Coating System to Interior Surfaces of Covered Steel Hopper Rail Cars in Plastic, Food, and Chemical Service |
NACE SP0692:2022 | Application of a Coating System to Exterior Surfaces of Steel Rail Cars |
NACE AMPP SP21523:2022 | Non-thermal Plasma Surface Preparation of Metals |
SSPC-CS 23.00 : 2016 | SPECIFICATION FOR THE APPLICATION OF THERMAL SPRAY COATINGS (METALLIZING) OF ALUMINUM, ZINC, AND THEIR ALLOYS AND COMPOSITES FOR THE CORROSION PROTECTION OF STEEL |
ASTM D 512 : 2012 | Standard Test Methods for Chloride Ion In Water (Withdrawn 2021) |
ISO 8502-12:2003 | Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 12: Field method for the titrimetric determination of water-soluble ferrous ions |
ISO 8502-5:1998 | Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) |
ISO 8502-6:2006 | Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 6: Extraction of soluble contaminants for analysis The Bresle method |
ISO 8502-2:2017 | Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 2: Laboratory determination of chloride on cleaned surfaces |
ISO 8502-9:1998 | Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 9: Field method for the conductometric determination of water-soluble salts |
SSPC-SP 5 : 2015 | WHITE METAL BLAST CLEANING |
NACE SP 05 08 : 2010 | METHODS OF VALIDATING EQUIVALENCE TO ISO 8502-9 ON MEASUREMENT OF THE LEVELS OF SOLUBLE SALTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.