MP 52-2001
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Manual of authorization procedures for plumbing and drainage products
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
06-25-2021
01-01-2001
Provides detailed information on the authorization procedures for plumbing products based upon the national StandardsMark, WaterMark and TypeTest Mark certification schemes administered by Standards Australia through its approved Certifying Body.
Committee |
WS-031
|
DocumentType |
Miscellaneous Product
|
ISBN |
0 7337 3718 8
|
Pages |
92
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
This Manual specifies uniform procedures for the certification of plumbing and drainage products that require statutory authorization. Such products are generally intended for use on authorized plumbing and drainage work by authorized persons.
First published as MP 52-1988.
Second edition 1990.
Revised in part and issued as third edition 1991.
Fourth edition 1993.
Fifth edition 1997.
Sixth edition 2001.
AS 1432-1996 | Copper tubes for plumbing, gasfitting and drainage applications |
AS 4032-1998 | Thermostatic mixing valves - Materials, design and performance requirements |
AS/NZS 4327:1995 | Metal-banded flexible couplings for low-pressure applications (Reconfirmed 2020) |
AS/NZS 3662:1996 | Water supply - Water efficient mains pressure shower spray heads |
AS 1371-1973 | Toilet seats of moulded plastics |
AS 3795-1996 | Copper alloy tubes for plumbing and drainage applications |
AS/NZS 3500.1.2:1998 | National plumbing and drainage Water supply - Acceptable solutions |
AS 3707-1989 | Method for testing pressure cycling resistance of pipes and fittings |
AS 2419.2-1994 | Fire hydrant installations Fire hydrant valves |
AS/NZS 3497:1998 | Drinking water treatment units - Plumbing requirements |
AS 3495-1997 | Stainless steel non-pressure pipes and fittings (Reconfirmed 2018) |
AS 1361-1995 | Electric heat-exchange water heaters - For domestic applications (Reconfirmed 2016) |
AS 1718-1992 | Water supply - Copper alloy screw-down pattern taps - Specified by dimensions |
AS/NZS 3500.0:1995 | National Plumbing and Drainage Code Glossary of terms |
AS 4176-1994 | Polyethylene/aluminium and cross-linked polyethylene/aluminium macro-composite pipe systems for pressure applications |
AS 4087-1996 | Metallic flanges for waterworks purposes |
AS 1769-1975 | Welded stainless steel tubes for plumbing applications (Reconfirmed 2018) |
AS 1830-1986 | Iron castings - Grey cast iron |
AS/NZS 1112:1996 | ISO metric hexagon nuts, including thin nuts, slotted nuts and castle nuts |
AS 1056.2-1985 | Storage water heaters - Specific requirements for water heaters with single shells |
AS 3673-1989 | Malleable cast iron threaded pipe fittings |
AS/NZS 3982:1996 | Urinals |
AS 3518.1-1988 | Acrylonitrile butadiene styrene (ABS) pipes and fittings for pressure applications - Pipes |
AS 3517-1995 | Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications |
AS 3920.1-1993 | Assurance of product quality Pressure equipment manufacture |
AS/NZS 3499:1997 | Flexible tube connectors for water supply |
AS 4181-1999 | Stainless steel clamps for waterworks purposes |
AS 3952-1991 | Water supply - DN 80 spring hydrant valve for general purposes |
AS 2492-1994 | Cross-linked polyethylene (PE-X) pipe for hot and cold water applications |
AS 1741-1991 | Vitrified clay pipes and fittings with flexible joints - Sewer quality (Reconfirmed 2018) |
AS/NZS 2845.1:1998 | Water supply - Backflow prevention devices Materials, design and performance requirements |
AS 1172.2-1999 | Water closet (WC) pans of 6/3 L capacity or proven equivalent Cisterns |
AS 1724-1975 | Cast grey iron pressure pipes and fittings with bolted gland joints |
AS/NZS 4158:1996 | Thermal-bonded polymeric coatings on valves and fittings for water industry purposes |
AS 2888.6-1986 | Methods of testing plastics waste outlets Method for load testing of plastics waste outlets |
AS 1628-1999 | Water supply - Metallic gate, globe and non-return valves (Reconfirmed 2015) |
AS/NZS 2544:1995 | Grey iron pressure fittings |
AS/NZS 1477:1999 | PVC pipes and fittings for pressure applications |
AS 3496-1999 | Metal-bodied and plastic-bodied taps |
AS 1631-1994 | Cast grey and ductile iron non-pressure pipes and fittings (Reconfirmed 2018) |
AS 3996-1992 | Metal access covers, road grates and frames |
AS 1646.3-2000 | Elastomeric seals for waterworks purposes - Material requirements for pipe joints seals used in water and wastewater applications with the exception of natural rubber and polyisoprene compounds |
AS/NZS 3879:1995 | Solvent cements and priming fluids for use with unplasticized PVC (uPVC) pipes and fittings |
AS/NZS 3500.2.2:1996 | National plumbing and drainage Sanitary plumbing and drainage - Acceptable solutions |
AS 3855-1994 | Suitability of plumbing and water distribution systems products for contact with potable water |
AS 3578-1993 | Cast iron non-return valves for general purposes |
AS/NZS 1229:1997 | Laundry troughs and tubs |
AS 1056.1-1991 | Storage water heaters General requirements |
AS 3558.5-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of degradation by ultraviolet light (Reconfirmed 2016) |
AS 1834.1-1991 | Material for soldering Solder alloys (Reconfirmed 2018) |
AS/NZS 2280:1999 | Ductile iron pressure pipes and fittings |
AS 1834.2-1986 | Material for soldering Flux-cored solders (Reconfirmed 2018) |
AS 1756-1999 | Household sinks |
AS 4023-1992 | Non-vitreous china used in sanitary appliances |
AS 3688-1994 | Water supply - Copper and copper alloy body compression and capillary fittings and threaded-end connectors |
AS/NZS 2642.3:1994 | Polybutylene pipe systems Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications |
AS 1646.2-2000 | Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Specifies by prescription formulation |
AS 4139-1993 | Fibre-reinforced concrete pipes and fittings |
AS/NZS 4348:1995 | Water supply - Domestic type water treatment appliances - Performance requirements |
AS 2345-1992 | Dezincification resistance of copper alloys |
AS 2712-1993 | Solar water heaters - Design and construction |
AS 3579-1993 | Cast iron wedge gate valves for general purposes |
AS/NZS 1730:1996 | Washbasins |
AS 1646.1-2000 | Elastomeric seals for waterworks purposes - General requirements |
AS 1172.1-1993 | Water closets of 6/3 L capacity - Pans |
AS 3571-1989 | Glass filament reinforced thermosetting plastics (GRP) pipes - Polyester based - Water supply, sewerage and drainage applications |
AS/NZS 4020:1999 | Products for use in contact with drinking water |
AS 3565.1-1998 | Meters for cold potable water - Volumetric chamber and turbine meters |
AS 1074-1989 | Steel tubes and tubulars for ordinary service (Reconfirmed 2018) |
AS 2638.1-1999 | Sluice valves for waterworks purposes Metal seated |
AS 1357.1-1992 | Water supply - Valves for use with unvented water heaters Protection valves |
AS 1210-1997 | Pressure vessels |
AS/NZS 4129:2000 | Fittings for polyethylene (PE) pipes for pressure applications |
AS 1910-1994 | Water supply - Float control valves for use in hot and cold water |
AS 3861-1991 | Spa baths (Reconfirmed 2016) |
AS/NZS 2642.2:1994 | Polybutylene pipe systems - Polybutylene (PB) pipe for hot and cold water applications |
AS 2887-1993 | Plastic waste fittings |
AS/NZS 1111:1996 | ISO metric hexagon commercial bolts and screws |
AS 3518.2-1988 | Acrylonitrile butadiene styrene (ABS) pipes and fittings for pressure applications - Solvent cement fittings |
AS 1357.2-1998 | Valves primarily for use in warm and hot water systems - Control valves |
AS 2537-1994 | Mechanical jointing fittings for use with cross-linked polyethylene (PE-X) pipe for hot and cold water applications |
AS 1589-1994 | Copper and copper alloy waste fittings |
AS/NZS 2023:1995 | Baths for ablutionary purposes |
AS 1976-1992 | Vitreous china used in sanitary appliances |
AS 2638.2-1999 | Sluice valves for waterworks purposes Resilient seated |
AS 2888.1-1993 | Methods of testing plastics waste fittings Method of determining the suitability of connection threads of BSP form |
AS 1056.3-1991 | Storage water heaters - Specific requirements for water heaters with composite shells |
AS 2396-1980 | Performance of household food waste disposal units |
AS 1321.10-1980 | Methods for the sampling and testing of adhesives Determination of non-volatile matter (solids content) of adhesives |
AS 3588-1996 | Shower bases and shower modules (Reconfirmed 2016) |
AS/NZS 1252:1996 | High-strength steel bolts with associated nuts and washers for structural engineering |
AS/NZS 3718:1997 | Water supply - Metal-bodied taps - Specified by performance |
AS/NZS 1200:2000 | Pressure equipment |
AS 1228-1997 | Pressure equipment - Boilers |
AS/NZS 1260:1999 | PVC pipes and fittings for drain, waste and vent applications |
AS 1357.1-2004 | Valves primarily for use in heated water systems Protection valves |
AS/NZS 3500.4:2003 | Plumbing and drainage Heated water services |
AS/NZS 3500.2:2003 | Plumbing and drainage Sanitary plumbing and drainage |
AS 4809-2003 | Copper pipe and fittings - Installation and commissioning |
AS/NZS 3666.1:2002 | Air-handling and water systems of buildings - Microbial control Design, installation and commissioning |
AS/NZS 3500.1:2003 | Plumbing and drainage Water services |
AS/NZS 6400:2003 | Water efficient products - Rating and labelling |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.