ISO 535:2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Paper and board — Determination of water absorptiveness — Cobb method
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
03-13-2023
Superseded by
Language(s)
French, English, Russian
Published date
01-21-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 535:2014 specifies a method of determining the water absorptiveness of sized paper and board, including corrugated fibreboard, under standard conditions. It may not be suitable for paper of grammage less than 50 g/m2 or embossed paper. It is not suitable for porous papers such as newsprint or unsized papers such as blotting paper or other papers having a relatively high water absorptiveness for which ISO 8787 is more suitable.
This method is not intended to be used for precise evaluation of the writing properties of paper although it does give a general indication of suitability for use with aqueous inks.
| Committee |
ISO/TC 6/SC 2
|
| DevelopmentNote |
Supersedes ISO/DIS 535. (01/2014) This standard was just updated in our system however it was originally released on 01-2019
|
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DS EN ISO 535 : 2014 | Identical |
| ONORM EN ISO 535 : 2014 | Identical |
| NF EN ISO 535 : 2014 | Identical |
| NBN EN ISO 535 : 2014 | Identical |
| NEN EN ISO 535 : 2014 | Identical |
| NEN ISO 535 : 2014 | Identical |
| NS EN ISO 535 : 2014 | Identical |
| I.S. EN ISO 535:2014 | Identical |
| PN EN ISO 535 : 2014 | Identical |
| SN EN ISO 535 : 2014 | Identical |
| UNI EN ISO 535 : 2014 | Identical |
| SS-EN ISO 535:2014 | Identical |
| UNE-EN ISO 535:2014 | Identical |
| BS EN ISO 535:2014 | Identical |
| EN ISO 535:2014 | Identical |
| DIN EN ISO 535:2014-06 | Identical |
| DIN EN ISO 535 E : 2014 | Identical |
| BS EN 20535:1994 | Identical |
| EN 20535:1994 | Identical |
| DIN EN 20535:1994-09 | Identical |
| I.S. EN 20535:1994 | Identical |
| SN EN 20535 : 1995 | Identical |
| NFQ 03 014 : 1985 | Similar to |
| UNE 57027:1994 | Identical |
| BS 2644(1991) : AMD 8174 | Identical |
| DIN 53132:1981-10 | Similar to |
| BS 2644:1980 | Identical |
| UNE-EN 20535:1996 | Identical |
| PN EN 20535 : 1996 | Identical |
| BS ISO 16245:2009 | Information and documentation. Boxes, file covers and other enclosures, made from cellulosic materials, for storage of paper and parchment documents |
| ASTM D 824 : 1994 : R1998 | Standard Test Method for Rate of Absorption of Water by Bibulous Papers |
| 15/30325867 DC : 0 | BS EN 868-3 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
| 07/30166924 DC : DRAFT AUG 2007 | BS EN 868-2 - PACKAGING MATERIALS FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
| DIN ISO 16245:2012-05 | Information and documentation - Boxes, file covers and other enclosures, made from cellulosic materials, for storage of paper and parchment documents (ISO 16245:2009) |
| 05/30135872 DC : 0 | EN 15283-2 - GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS |
| NF EN 60554-2 : 2003 | CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| BS 5626-2:1979 | Cellulosic papers for electrical purposes Methods of test |
| UNE-EN 350:2016 | Durability of wood and wood-based products - Testing and classification of the durability to biological agents of wood and wood-based materials |
| CEI EN 50085-2-4 : 2011 | CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 2-4: PARTICULAR REQUIREMENTS FOR SERVICE POLES AND SERVICE POSTS |
| ISO 12757-1:2017 | Ball point pens and refills — Part 1: General use |
| UNE-EN 868-7:2017 | Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods |
| UNE-EN 868-2:2017 | Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods |
| BS EN 868-3:2017 | Packaging for terminally sterilized medical devices Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5). Requirements and test methods |
| UNE-EN 868-6:2017 | Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods |
| BS EN 520 : 2004 | GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN 868-2:2017-05 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
| ISO 2846-3:2002 | Graphic technology Colour and transparency of printing ink sets for four-colour-printing Part 3: Publication gravure printing |
| DIN VDE 0311-20 : 1988 | CELLULOSIC PAPER FOR ELECTRICAL PURPOSES; METHODS OF TEST |
| UNE-ISO 2846-1:2014 | Graphic technology. Colour and transparency of printing ink sets for four-colour printing. Part 1: Sheet-fed and heat-set web offset lithographic printing |
| BS IEC 61084-2-4:2017 | Cable trunking systems and cable ducting systems for electrical installations Particular requirements. Service poles and service posts |
| BS EN 350:2016 | Durability of wood and wood-based products. Testing and classification of the durability to biological agents of wood and wood-based materials |
| DIN EN 15283-2:2009-12 | Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards (includes Amendment A1:2009) |
| 15/30320112 DC : 0 | BS EN 61084-2-4 - CABLE TRUNKING AND DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 2-4: PARTICULAR REQUIREMENTS FOR SERVICE POLES AND SERVICE POSTS |
| PREN 868-7 : DRAFT 2015 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 7: ADHESIVE COATED PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| BS EN 50085-2-4:2009 | Cable trunking systems and cable ducting systems for electrical installations Particular requirements for service poles and service posts |
| 05/30127939 DC : DRAFT JAN 2005 | ISO 2834-1 - GRAPHIC TECHNOLOGY - LABORATORY PREPARATION TEST PRINTS - PART 1: PASTE INKS |
| BS ISO 2846-5:2005 | Graphic technology. Colour and transparency of printing ink sets for four-colour printing Flexographic printing |
| I.S. EN 50085-2-4:2009 | CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 2-4: PARTICULAR REQUIREMENTS FOR SERVICE POLES AND SERVICE POSTS |
| ISO 4046-5:2002 | Paper, board, pulps and related terms Vocabulary Part 5: Properties of pulp, paper and board |
| CGSB-43.146 : 2002 | DESIGN, MANUFACTURE AND USE OF INTERMEDIATE BULK CONTAINERS FOR THE TRANSPORTATION OF DANGEROUS GOODS |
| PREN 868-3 : DRAFT 2015 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
| ISO 2834:1999 | Graphic technology Test print preparation for offset and letterpress inks |
| IEC 60554-2:2001 | Cellulosic papers for electrical purposes - Part 2: Methods of test |
| BS EN 868-7:2017 | Packaging for terminally sterilized medical devices Adhesive coated paper for low temperature sterilization processes. Requirements and test methods |
| I.S. EN 13963:2014 | JOINTING MATERIALS FOR GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 868-3:2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
| I.S. EN 868-7:2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 7: ADHESIVE COATED PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 868-2:2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
| I.S. EN 520:2005 | GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 868-6:2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| BS 7569:1994 | Recommendations for the packaging of dangerous goods for transport |
| BS 6939-6:1994 | Recommendations for intermediate bulk containers (IBCs) for dangerous goods Specific requirements for fibreboard IBCs |
| ISO 16245:2009 | Information and documentation — Boxes, file covers and other enclosures, made from cellulosic materials, for storage of paper and parchment documents |
| 01/121744 DC : DRAFT APR 2001 | ISO/DIS 2846-3 - GRAPHIC TECHNOLOGY - COLOUR AND TRANSPARENCY OF PRINTING INK SETS FOR FOUR-COLOUR-PRINTING - PART 3: PUBLICATION GRAVURE PRINTING |
| BS ISO 27668-1:2017 | Gel ink ball pens and refills General use |
| ISO/TS 18344:2016 | Effectiveness of paper deacidification processes |
| DIN 55524-2:2016-08 | PACKAGING - ATTRIBUTES - PART 2: ATTRIBUTES FOR PACKAGING MADE OF SOLID FIBREBOARD |
| UNI EN 15283-2 : 2009 | GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS |
| BS ISO/IEC 29142-1:2013 | Information technology. Print cartridge characterization General: terms, symbols, notations and cartridge characterization framework |
| 15/30325864 DC : 0 | BS EN 868-7 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 7: ADHESIVE COATED PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| BS ISO 4046-5:2016 | Paper, board, pulps and related terms. Vocabulary Properties of pulp, paper and board |
| BS ISO 2846-1:2017 | Graphic technology. Colour and transparency of printing ink sets for four-colour printing Sheet-fed and heat-set web offset lithographic printing |
| CEI EN 60554-2 : 2002 | CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| 15/30320103 DC : 0 | BS EN 61084-2-1 - CABLE TRUNKING AND DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 2-1: CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS INTENDED FOR MOUNTING ON WALLS AND CEILINGS |
| BS IEC 61084-2-1:2017 | Cable trunking systems and cable ducting systems for electrical installations Particular requirements. Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings |
| PREN 868-2 : DRAFT 2015 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
| IEC 61084-2-1:2017 | Cable trunking systems and cable ducting systems for electrical installations - Part 2-1: Particular requirements - Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings |
| ISO 27668-1:2017 | Gel ink ball pens and refills — Part 1: General use |
| DIN EN 13963:2014-09 | JOINTING MATERIALS FOR GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| EN 868-7:2017 | Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods |
| UNI EN 520 : 2009 | GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| UNI EN 13963 : 2014 | JOINTING MATERIALS FOR GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| 15/30325855 DC : 0 | BS EN 868-2 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
| UNI ISO 16245 : 2011 | INFORMATION AND DOCUMENTATION - BOXES, FILE COVERS AND OTHER ENCLOSURES, MADE FROM CELLULOSIC MATERIALS, FOR STORAGE OF PAPER AND PARCHMENT DOCUMENTS |
| 08/30168497 DC : DRAFT JAN 2008 | BS ISO 16245 - INFORMATION AND DOCUMENTATION - BOXES, FILE COVERS AND OTHER ENCLOSURES, MADE FROM CELLULOSIC MATERIALS, FOR STORAGE OR PAPER AND PARCHMENT DOCUMENTS |
| BS ISO 5721-1:2013 | Agricultural tractors. Requirements, test procedures and acceptance criteria for the operator’s field of vision Field of vision to the front |
| BS ISO 2834:1999 | Graphic technology. Test print preparation for offset and letterpress inks |
| ISO 14145-1:2017 | Roller ball pens and refills — Part 1: General use |
| BS ISO 2846-4:2000 | Graphic technology. Colour and transparency of ink sets for four-colour-printing Screen printing |
| PD ISO/TS 18344:2016 | Effectiveness of paper deacidification processes |
| 00/107014 DC : DRAFT OCT 2000 | PREN 520 - GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| 16/30339155 DC : 0 | BS ISO 2846-1 - GRAPHIC TECHNOLOGY - COLOUR AND TRANSPARENCY OF PRINTING INK SETS FOR FOUR-COLOUR PRINTING - PART 1: SHEET-FED AND HEAT-SET WEB OFFSET LITHOGRAPHIC PRINTING |
| 08/30176450 DC : DRAFT JAN 2008 | BS EN ISO 27668-1 - GEL INK BALL PENS AND REFILLS - PART 1: GENERAL USE |
| PREN 868-6 : DRAFT 2015 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| BS EN 50085-2-1 : 2006 | CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 2-1: CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS INTENDED FOR MOUNTING ON WALLS AND CEILINGS |
| 07/30166936 DC : DRAFT AUG 2007 | BS EN 868-6 - PACKAGING MATERIALS FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR THE MANUFACTURE OF STERILE BARRIER SYSTEMS INTENDED FOR STERILIZATION BY LOW TEMPERATURE STERILIZATION PROCESSES OR IRRADIATION - REQUIREMENTS AND TEST METHODS |
| DIN 55524-1:2016-08 | Packaging - Attributes - Part 1: Attributes for packaging made of corrugated fibreboard |
| ASTM D 4727/D4727M : 2017 : REDLINE | Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes |
| ISO 2846-4:2000 | Graphic technology Colour and transparency of printing ink sets for four-colour-printing Part 4: Screen printing |
| ISO 2846-5:2005 | Graphic technology — Colour and transparency of printing ink sets for four-colour printing — Part 5: Flexographic printing |
| I.S. EN 50085-2-1:2006 | CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 2-1: CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS INTENDED FOR MOUNTING ON WALLS AND CEILINGS |
| DIN EN 868-6:2015-08 (Draft) | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| BS EN 868-2:2017 | Packaging for terminally sterilized medical devices Sterilization wrap. Requirements and test methods |
| BS EN 13963:2014 | Jointing materials for gypsum boards. Definitions, requirements and test methods |
| UNE-EN 13963:2014 | Jointing materials for gypsum boards - Definitions, requirements and test methods |
| UNE-EN 520:2005 | Gypsum plasterboards - Definitions, requirements and test methods |
| BS EN 868-6:2017 | Packaging for terminally sterilized medical devices Paper for low temperature sterilization processes. Requirements and test methods |
| EN 868-2:2017 | Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods |
| EN 15283-2:2008+A1:2009 | Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards |
| EN 520:2004+A1:2009 | Gypsum plasterboards - Definitions, requirements and test methods |
| EN 13963:2014 | Jointing materials for gypsum boards - Definitions, requirements and test methods |
| EN 13676:2001 | Polymer coated paper and board intended for food contact - Detection of pinholes |
| EN 350:2016 | Durability of wood and wood-based products - Testing and classification of the durability to biological agents of wood and wood-based materials |
| EN 868-6:2017 | Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods |
| EN 868-3:2017 | Packaging for terminally sterilized medical devices - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods |
| UNE 102043:2013 | Installation of construction systems with gypsum plasterboards. Partitions, wall linings and ceilings. Definitions, applications and recommendations. |
| 03/311479 DC : DRAFT JULY 2003 | ISO 2846-5 - GRAPHIC TECHNOLOGY - COLOUR AND TRANSPARENCY OF PRINTING INK SETS FOR FOUR-COLOUR PRINTING - PART 5: FLEXOGRAPHIC PRINTING |
| BS EN 15283-2 : 2008 | GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS |
| ISO 2846-1:2017 | Graphic technology — Colour and transparency of printing ink sets for four-colour printing — Part 1: Sheet-fed and heat-set web offset lithographic printing |
| 12/30258621 DC : 0 | BS ISO/IEC 29142-1 - CARTRIDGE CHARACTERIZATION STANDARD - PART 1: GENERAL: TERMS, SYMBOLS AND NOTATIONS |
| IEC 61084-2-4:2017 | Cable trunking systems and cable ducting systems for electrical installations - Part 2-4: Particular requirements - Service poles and service posts |
| 15/30325858 DC : 0 | BS EN 868-6 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| 07/30166927 DC : DRAFT AUG 2007 | BS EN 868-3 - PACKAGING MATERIALS FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
| DIN EN 868-7:2015-08 (Draft) | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 7: ADHESIVE COATED PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| BS EN 60554-2:2002 | Cellulosic papers for electrical purposes Methods of test |
| ASTM D 824 : 1994 : R2007 | Standard Test Method for Rate of Absorption of Water by Bibulous Papers (Withdrawn 2010) |
| ASTM D 4919 : 2017 | Standard Guide for Testing of Hazardous Materials (Dangerous Goods) Packagings |
| TAPPI T 441 : 2013 | WATER ABSORPTIVENESS OF SIZED (NON-BIBULOUS) PAPER, PAPERBOARD, AND CORRUGATED FIBREBOARD (COBB TEST) |
| I.S. EN 350:2016 | DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - TESTING AND CLASSIFICATION OF THE DURABILITY TO BIOLOGICAL AGENTS OF WOOD AND WOOD-BASED MATERIALS |
| NF ISO 16245 : 2011 | INFORMATION AND DOCUMENTATION - BOXES, FILE COVERS AND OTHER ENCLOSURES, MADE FROM CELLULOSIC MATERIALS, FOR STORAGE OF PAPER AND PARCHMENT DOCUMENTS |
| ASTM D 824 : 1994 : R2002 | Standard Test Method for Rate of Absorption of Water by Bibulous Papers |
| ISO/IEC 29142-1:2013 | Information technology Print cartridge characterization Part 1: General: terms, symbols, notations and cartridge characterization framework |
| I.S. EN 15283-2:2008 | GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS |
| DIN EN 868-3:2015-08 (Draft) | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
| DIN EN 868-2:2015-08 (Draft) | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
| DIN EN 520:2009-12 | Gypsum plasterboards - Definitions, requirements and test methods (includes Amendment A1:2009) |
| BS EN 13676:2001 | Polymer coated paper and board intended for food contact. Detection of pinholes |
| UNE-EN 868-3:2017 | Packaging for terminally sterilized medical devices - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods |
| DIN EN 868-3:2017-05 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
| EN 50085-2-1 : 2006 AMD 1 2011 | CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 2-1: CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS INTENDED FOR MOUNTING ON WALLS AND CEILINGS |
| EN 50085-2-4:2009 | Cable trunking systems and cable ducting systems for electrical installations - Part 2-4: Particular requirements for service poles and service posts |
| DIN EN 868-6:2017-05 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| EN 60554-2:2002 | Cellulosic papers for electrical purposes - Part 2: Methods of test |
| ISO 5269-1:2005 | Pulps — Preparation of laboratory sheets for physical testing — Part 1: Conventional sheet-former method |
| ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
| ISO 187:1990 | Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples |
| ISO 8787:1986 | Paper and board — Determination of capillary rise — Klemm method |
| ISO/TR 24498:2006 | Paper, board and pulps Estimation of uncertainty for test methods |
| ISO 186:2002 | Paper and board — Sampling to determine average quality |
| TAPPI T 1200 : 2014 | INTERLABORATORY EVALUATION OF TEST METHODS TO DETERMINE TAPPI REPEATABILITY AND REPRODUCIBILITY |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.