ISO 4662:2017
Current
Current
The latest, up-to-date edition.
Rubber, vulcanized or thermoplastic Determination of rebound resilience
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
French, English
Published date
06-12-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 4662:2017 specifies two methods for determining the rebound resilience of rubber the hardness of which lies between 30 IRHD and 85 IRHD. They are the pendulum method and the tripsometer method.
With the pendulum method, a mass with a spherical end impacts a flat test piece, firmly held but free to bulge. The kinetic energy of the impacting mass is measured immediately before and after impact.
With the tripsometer method, a flat test piece is impacted by a hemisphere mounted on the periphery of a disc which is supported on an axle and caused to rotate by an off-axis mass. The kinetic energy of the impacting mass is measured immediately before and after impact.
| DevelopmentNote |
Supersedes ISO 1767 (04/2001) Supersedes ISO/DIS 4662. (06/2017)
|
| DocumentType |
Standard
|
| Pages |
34
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF ISO 4662 : 2017 | Identical |
| NEN ISO 4662 : 2017 | Identical |
| BS ISO 4662:2017 | Identical |
| UNI ISO 4662 : 2011 | Identical |
| UNI ISO 4662:2017 | Identical |
| IS 3400 : Part 11 : 2021 | Identical |
| NBN T 31 038 : 1988 | Identical |
| UNE-ISO 4662:2013 | Identical |
| UNE 53604:1990 | Identical |
| NFT 46 036 : 1978 | Similar to |
| PD CEN/TS 12633:2014 | Method of polishing specimens prior to the measurement of slip and skid resistance |
| 02/101929 DC : DRAFT FEB 2002 | PREN 12697-38 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 38: TEST EQUIPMENT AND CALIBRATION |
| BS ISO 24453:2008 | Rubber. Acquisition and presentation of comparable single-point data |
| CSA Z323.4.9 : 0 | WHEELCHAIRS - DETERMINATION OF COEFFICIENT OF FRICTION OF TEST SURFACES |
| VDE 0212-2 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| 11/30251982 DC : 0 | BS EN 12697-49 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 49: DETERMINATION OF FRICTION AFTER POLISHING |
| 08/30168345 DC : DRAFT JULY 2008 | BS ISO 15136-1 - DOWNHOLE EQUIPMENT FOR PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
| XP CEN/TS 15901-7 : 2011 XP | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 7: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF A PAVEMENT SURFACE USING A DEVICE WITH LONGITUDINAL FIXED SLIP RATIO (LFCG): THE GRIPTESTER |
| 09/30185894 DC : 0 | BS EN 1344 - CLAY PAVERS - REQUIREMENTS AND TEST METHODS |
| 08/30185875 DC : 0 | BS EN 1097-8 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
| DIN EN 1339:2003-08 | CONCRETE PAVING FLAGS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 16837:2018 | SURFACES FOR SPORTS AREAS - DETERMINATION OF LINEAR SHOE/SURFACE FRICTION |
| DD CEN/TS 15676 : DRAFT DEC 2007 | WOOD FLOORING - SLIP RESISTANCE - PENDULUM TEST |
| UNE-EN 12697-49:2014 | Bituminous mixtures - Test methods for hot mix asphalt - Part 49: Determination of friction after polishing |
| I.S. EN 12697-49:2014 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 49: DETERMINATION OF FRICTION AFTER POLISHING |
| API 11D2 : 2010 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PUMPS |
| S.R. CEN TS 15901-13:2011 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 13: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF A PAVEMENT SURFACE BY MEASUREMENT OF A SIDEWAY FORCE COEFFICIENT (SFCO): THE ODOLIOGRAPH |
| UNI CEN/TS 12633 : 2014 | METHOD OF POLISHING SPECIMENS PRIOR TO THE MEASUREMENT OF SLIP AND SKID RESISTANCE |
| I.S. EN ISO 13287:2012 | PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR - TEST METHOD FOR SLIP RESISTANCE (ISO 13287:2012) |
| DIN EN 13748-2:2005-03 | Terrazzo tiles - Part 2: Terrazzo tiles for external use; German version EN 13748-2:2004 |
| BS EN 1097-8:2009 | Tests for mechanical and physical properties of aggregates Determination of the polished stone value |
| BS EN 12697-38:2004 | Bituminous mixtures. Test methods for hot mix asphalt Test equipment and calibration |
| BS EN 1338:2003 | Concrete paving blocks. Requirements and test methods |
| DIN EN 14837:2006-08 | SURFACES FOR SPORTS AREAS - DETERMINATION OF SLIP RESISTANCE |
| BS EN 1339:2003 | Concrete paving flags. Requirements and test methods |
| BS EN 14837:2006 | Surfaces for sports areas. Determination of slip resistance |
| BS EN 1340:2003 | Concrete kerb units. Requirements and test methods |
| EN ISO 13287:2012 | Personal protective equipment - Footwear - Test method for slip resistance (ISO 13287:2012) |
| EN 12697-49:2014 | Bituminous mixtures - Test methods for hot mix asphalt - Part 49: Determination of friction after polishing |
| CEN/TS 15901-4:2009 | Road and airfield surface characteristics - Part 4: Procedure for determining the skid resistance of pavements using a device with longitudinal controlled slip (LFCT): Tatra Runway Tester (TRT) |
| CEN/TS 15901-13:2011 | Road and airfield surface characteristics - Part 13: Procedure for determining the skid resistance of a pavement surface by measurement of a sideway force coefficient (SFCO): the Odoliograph |
| CEN/TS 15676:2007 | Wood flooring - Slip resistance - Pendulum test |
| CEN/TS 12633:2014 | Method of polishing specimens prior to the measurement of slip and skid resistance |
| EN 12503-6:2001 | Sports mats - Part 6: Determination of the top friction |
| CEN/TS 15901-6:2009 | Road and airfield surface characteristics - Part 6: Procedure for determining the skid resistance of a pavement surface by measurement of the sideway force coefficient (SFCS): SCRIM® |
| EN 13036-4:2011 | Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test |
| BS EN 61854:1998 | Overhead lines. Requirements and tests for spacers |
| 10/30217328 DC : 0 | BS EN 1340 - CONCRETE KERB UNITS - REQUIREMENTS AND TEST METHODS |
| S.R. CEN TS 15901-6:2009 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 6: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF A PAVEMENT SURFACE BY MEASUREMENT OF THE SIDEWAY FORCE COEFFICIENT (SFCS): SCRIM(R) |
| XP CEN/TS 15901-4 : 2011 XP | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 4: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF PAVEMENTS USING A DEVICE WITH LONGITUDINAL CONTROLLED SLIP (LFCT): TATRA RUNWAY TESTER (TRT) |
| UNI CEN/TS 15901-13 : 2011 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 13: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF A PAVEMENT SURFACE BY MEASUREMENT OF A SIDEWAY FORCE COEFFICIENT (SFCO): THE ODOLIOGRAPH |
| 16/30320756 DC : 0 | BS EN 1097-8 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
| S.R. CEN TS 15901-7:2009 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 7: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF A PAVEMENT SURFACE USING A DEVICE WITH LONGITUDINAL FIXED SLIP RATIO (LFCG): THE GRIPTESTER(R) |
| NF EN 61854 : 2001 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| S.R. CEN TS 15676:2007 | WOOD FLOORING - SLIP RESISTANCE - PENDULUM TEST |
| CEI EN 61854 : 2000 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| PREN 1340 : DRAFT 2010 | CONCRETE KERB UNITS - REQUIREMENTS AND TEST METHODS |
| S.R. CEN/TS 12633:2014 | METHOD OF POLISHING SPECIMENS PRIOR TO THE MEASUREMENT OF SLIP AND SKID RESISTANCE |
| 10/30217325 DC : 0 | BS EN 1339 - CONCRETE PAVING FLAGS - REQUIREMENTS AND TEST METHODS |
| ISO 24453:2008 | Rubber Acquisition and presentation of comparable single-point data |
| EN 16837:2018 | Surfaces for sports areas - Determination of linear shoe/surface friction |
| PREN 13036-4 : DRAFT 2009 | METHOD FOR MEASUREMENT OF SLIP/SKID RESISTANCE OF SURFACE - PART 4: THE PENDULUM TEST |
| ISO 4632-1:1982 | Rubber, vulcanized Classification Part 1: Description of the classification system |
| NF EN 1097-8 : 2009 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
| DIN EN 1344:2015-10 | CLAY PAVERS - REQUIREMENTS AND TEST METHODS |
| DIN EN 12697-38:2004-10 | Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration; German version EN 12697-38:2004 |
| DIN EN 13036-4:2011-12 | Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface - The pendulum test; German version EN 13036-4:2011 |
| BS EN 1344:2013 | Clay pavers. Requirements and test methods |
| EN 61854:1998 | Overhead lines - Requirements and tests for spacers |
| BS EN 13748-1 : 2004 | TERRAZZO TILES - PART 1: TERRAZZO TILES FOR INTERNAL US |
| BS EN 14231:2003 | Natural stone test methods. Determination of the slip resistance by means of the pendulum tester |
| I.S. EN 13036-4:2011 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 4: METHOD FOR MEASUREMENT OF SLIP/SKID RESISTANCE OF A SURFACE: THE PENDULUM TEST |
| I.S. EN ISO 15136-1:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
| I.S. EN 1344:2013 | CLAY PAVERS - REQUIREMENTS AND TEST METHODS |
| UNI EN 13036-4 : 2011 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 4: METHOD FOR MEASUREMENT OF SLIP/SKID RESISTANCE OF A SURFACE: THE PENDULUM TEST |
| BS 903-0:2003 | Physical testing of rubber General |
| UNE-EN ISO 28017:2012 | Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification (ISO 28017:2011) |
| BS EN 12697-49:2014 | Bituminous mixtures. Test methods for hot mix asphalt Determination of friction after polishing |
| 93/110634 DC : DRAFT DEC 1993 | PREN 1345 - SPECIFICATION FOR CLAY PAVERS AND ACCESSORIES FOR RIGID PAVING |
| ISO 1920-4:2005 | Testing of concrete Part 4: Strength of hardened concrete |
| DIN EN 61854 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| UNE-EN ISO 13287:2013 | Personal protective equipment - Footwear - Test method for slip resistance (ISO 13287:2012) |
| UNE 41201:2010 IN | Road and airfield surface characteristics. Procedure for determining the skid resistance of a pavement surface by measurement of the sideway force coefficient (SFCS): SCRIM(r) |
| 09/30207051 DC : 0 | BS EN 13036-4 - METHOD FOR MEASUREMENT OF SLIP/SKID RESISTANCE OF SURFACE - PART 4: THE PENDULUM TEST |
| UNI EN 12697-49 : 2014 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 49: DETERMINATION OF FRICTION AFTER POLISHING |
| BS 7825-3.4:1998 | Calibration of rubber and plastics test equipment. Calibration schedules Mechanical properties of rubber |
| UNI CEN/TS 15901-7 : 2010 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 7: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF A PAVEMENT SURFACE USING A DEVICE WITH LONGITUDINAL FIXED SLIP RATIO (LFCG): THE GRIPTESTER |
| 10/30217322 DC : 0 | BS EN 1338 - CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS |
| 15/30316981 DC : DRAFT FEB 2015 | BS EN 16837 - SURFACES FOR SPORTS AREAS - DETERMINATION OF LINEAR SHOE/SURFACE FRICTION |
| I.S. EN ISO 28017:2018 | RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION (ISO 28017:2018) |
| I.S. EN 61854:1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| S.R. CEN TS 15901-8:2009 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 8: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF A PAVEMENT SURFACE BY MEASUREMENT OF THE SIDEWAY-FORCE COEFFICIENT (SFCD): SKM |
| S.R. CEN TS 15901-4:2009 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 4: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF PAVEMENTS USING A DEVICE WITH LONGITUDINAL CONTROLLED SLIP (LFCT): TATRA RUNWAY TESTER (TRT) |
| EN ISO 28017:2018 | Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification (ISO 28017:2018) |
| DIN EN 13748-1:2005-08 | TERRAZZO TILES - PART 1: TERRAZZO TILES FOR INTERNAL USE |
| DIN EN ISO 13287:2013-02 | PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR - TEST METHOD FOR SLIP RESISTANCE (ISO 13287:2012) |
| DIN EN 1097-8:2016-07 (Draft) | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
| EN 1097-8:2009 | Tests for mechanical and physical properties of aggregates - Part 8: Determination of the polished stone value |
| UNE-EN 1344:2015 | Clay pavers - Requirements and test methods |
| ONORM EN 1097-8 : 2011 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
| UNI EN 1344 : 2013 | CLAY PAVERS - REQUIREMENTS AND TEST METHODS |
| UNI EN 1340 : 2004 | CONCRETE KERB UNITS - REQUIREMENTS AND TEST METHODS |
| UNI EN 1338 : 2004 | CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS |
| UNI CEN/TS 15901-8 : 2010 | Road and airfield surface characteristics - Part 8: Procedure for determining the skid resistance of a pavement surface by measurement of the sideway-force coefficient (SFCD): SKM |
| UNI EN 1339 : 2005 | CONCRETE PAVING FLAGS - REQUIREMENTS AND TEST METHODS |
| UNI CEN/TS 15676 : 2008 | WOOD FLOORING - SLIP RESISTANCE - PENDULUM TEST |
| UNI CEN/TS 15901-6 : 2010 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 6: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF A PAVEMENT SURFACE BY MEASUREMENT OF THE SIDEWAY FORCE COEFFICIENT (SFCS): SCRIM |
| 10/30212877 DC : DRAFT JUNE 2010 | BS ISO 28017 - RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION |
| DD CEN/TS 15901-7:2009 | Road and airfield surface characteristics Procedure for determining the skid resistance of a pavement surface using a device with longitudinal fixed slip ratio (LFCG). The GripTester® |
| DD ENV 12633:2003 | Method of determination of unpolished and polished slip/skid resistance value |
| 11/30241728 DC : DRAFT MAR 2011 | BS EN ISO 13287 - PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR - TEST METHOD FOR SLIP RESISTANCE |
| 07/30161672 DC : 0 | BS ISO 24453 - RUBBER - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA |
| BS EN ISO 13287:2012 | Personal protective equipment. Footwear. Test method for slip resistance |
| XP CEN/TS 15901-6 : 2011 XP | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 6: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF A PAVEMENT SURFACE BY MEASUREMENT OF THE SIDEWAY FORCE COEFFICIENT (SFCS): SCRIM |
| PREN 1339 : DRAFT 2010 | CONCRETE PAVING FLAGS - REQUIREMENTS AND TEST METHODS |
| PREN 1338 : DRAFT 2010 | CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS |
| IEC 61854:1998 | Overhead lines - Requirements and tests for spacers |
| UNI EN 1097-8 : 2009 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
| BS EN 13748-2:2004 | Terrazzo tiles Terrazzo tiles for external use |
| BS EN 13036-4:2011 | Road and airfield surface characteristics. Test methods Method for measurement of slip/skid resistance of a surface: The pendulum test |
| ISO 13287:2012 | Personal protective equipment Footwear Test method for slip resistance |
| ISO 15136-1:2009 | Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 1: Pumps |
| BS EN 12503-6:2001 | Sports mats Determination of the top friction |
| I.S. EN 1097-8:2009 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
| EN ISO 15136-1:2009 | Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009) |
| EN 13748-2:2004 | Terrazzo tiles - Part 2: Terrazzo tiles for external use |
| EN 14231:2003 | Natural stone test methods - Determination of the slip resistance by means of the pendulum tester |
| ONORM EN 12697-49 : MAY 2014 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 49: DETERMINATION OF FRICTION AFTER POLISHING |
| I.S. ENV 12633:2003 | METHOD OF DETERMINATION OF UNPOLISHED AND POLISHED SLIP/SKID RESISTANCE VALUE |
| 02/102106 DC : DRAFT MAR 2002 | PREN 13748-2 - TERRAZZO TILES - PART 2: TERRAZZO TILES FOR EXTERIOR USE |
| DIN EN ISO 28017:2015-12 | RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION (ISO 28017:2011 + AMD 1:2015) |
| DIN EN 1338:2003-08 | CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS |
| DIN EN 1340:2003-08 | CONCRETE KERB UNITS - REQUIREMENTS AND TEST METHODS |
| UNE-CEN/TS 15901-7:2010 IN | Road and airfield surface characteristics - Part 7: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal fixed slip ratio (LFCG): the GripTester(r) |
| S.R. CEN/TS 16165:2016 | DETERMINATION OF SLIP RESISTANCE OF PEDESTRIAN SURFACES - METHODS OF EVALUATION |
| ISO 28017:2018 | Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications — Specification |
| UNI CEN/TS 15901-4 : 2010 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 4: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF PAVEMENTS USING A DEVICE WITH LONGITUDINAL CONTROLLED SLIP (LFCT): TATRA RUNWAY TESTER (TRT) |
| PREN 1097-8 : DRAFT 2016 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
| XP CEN/TS 15901-13 : 2011 XP | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 13: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF A PAVEMENT SURFACE BY MEASUREMENT OF A SIDEWAY FORCE COEFFICIENT (SFCO): THE ODOLIOGRAPH |
| ASTM F 2772 : 2011 : REDLINE | Standard Specification for Athletic Performance Properties of Indoor Sports Floor Systems |
| UNI EN ISO 13287 : 2012 | PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR - TEST METHOD FOR SLIP RESISTANCE |
| UNE-EN 13036-4:2012 | Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test |
| BS EN ISO 15136-1:2001 | Downhole equipment for petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Pumps |
| ONORM EN ISO 13287 : 2013 | PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR - TEST METHOD FOR SLIP RESISTANCE (ISO 13287:2012) |
| CEN/TS 16165:2016 | Determination of slip resistance of pedestrian surfaces - Methods of evaluation |
| CEN/TS 15901-8:2009 | Road and airfield surface characteristics - Part 8: Procedure for determining the skid resistance of a pavement surface by measurement of the sideway-force coefficient (SFCD): SKM |
| CEN/TS 15901-7:2009 | Road and airfield surface characteristics - Part 7: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal fixed slip ratio (LFCG): the GripTester® |
| EN 12697-38:2004 | Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration |
| DIN EN 14231:2003-07 | Natural stone test methods - Determination of the slip resistance by means of the pendulum tester; German version EN 14231:2003 |
| ENV 12633:2003 | Method of determination of unpolished and polished slip/skid resistance value |
| ISO 23529:2016 | Rubber General procedures for preparing and conditioning test pieces for physical test methods |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| ISO/TR 9272:2005 | Rubber and rubber products Determination of precision for test method standards |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.