ISO 4301-1:2016
Current
Current
The latest, up-to-date edition.
Cranes — Classification — Part 1: General
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
06-27-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 4301-1:2016 establishes a general classification of cranes and mechanisms based on the service conditions, mainly expressed by the following:
- the total number of working cycles to be carried out during the specified design life of the crane;
- the load spectrum factor which represents the relative frequencies of loads to be handled;
- the average displacements.
Additional information for the user: This version uses the cycle - based classification method. If you need to use the time - based classification method please use the 1986 version.
| Committee |
ISO/TC 96/SC 10
|
| DevelopmentNote |
Supersedes ISO 4301 (04/2001) Supersedes ISO/DIS 4301-1. (06/2016)
|
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| IS 13834 : Part 1 : 2018 | Identical |
| IS 14147 : Part 2 : 2018 | Identical |
| BS ISO 4301-1:2016 | Identical |
| JIS B 8822-1:2021 | Identical |
| NFE 52 110 : 80 FD | Similar to |
| PN ISO 4301-1 : 1998 | Identical |
| UNE 58112-1:1991 | Identical |
| UNI ISO 4301-1 : 1988 | Identical |
| 06/30147145 DC : 0 | EN 1570 - SAFETY REQUIREMENTS FOR LIFTING TABLES |
| ISO 8686-5:2017 | Cranes — Design principles for loads and load combinations — Part 5: Overhead travelling and portal bridge cranes |
| BS ISO 16881-1:2005 | Cranes. Design calculation for rail wheels and associated trolley track supporting structure General |
| 17/30325088 DC : 0 | BS ISO 8686-3 - CRANES - DESIGN PRINCIPLES FOR LOADS AND LOAD COMBINATIONS - PART 3: TOWER CRANES |
| 07/30169970 DC : DRAFT DEC 2007 | BS ISO 4309:2004 - CRANES - WIRE ROPES - CODE OF PRACTICE FOR CARE AND MAINTENANCE, INSPECTION AND DISCARD |
| DIN ISO 4309:2013-06 | Cranes - Wire ropes - Care and maintenance, inspection and discard (ISO 4309:2010) |
| ISO 17440:2014 | Cranes General design Limit states and proof of competence of forged steel hooks |
| 04/102834 DC : DRAFT JAN 2004 | ISO 16881-1 - CRANES - DESIGN CALCULATION FOR RAIL WHEELS AND ASSOCIATED TROLLEY TRACK SUPPORTING STRUCTURE - PART 1: GENERAL |
| 13/30275387 DC : 0 | BS ISO 20332 - CRANES - PROOF OF COMPETENCE OF STEEL STRUCTURES |
| BS EN 1570-1 : 2011 | SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS |
| BS ISO 4308-1:2003 | Cranes and lifting appliances. Selection of wire ropes General |
| BS ISO 4309:2017 | Cranes. Wire ropes. Care and maintenance, inspection and discard |
| 06/30110083 DC : 0 | ISO 20332-1 - CRANES - PROOF OF COMPETENCE OF STEEL STRUCTURES - PART 1: GENERAL |
| CSA B354.5 : 2007 : R2016 | MAST-CLIMBING WORK PLATFORMS |
| 09/30187535 DC : 0 | BS EN 13000 - CRANES - MOBILE CRANES |
| ISO 4301-5:1991 | Cranes — Classification — Part 5: Overhead travelling and portal bridge cranes |
| I.S. 361:2013 | CODE OF PRACTICE FOR THE SAFE USE OF TOWER CRANES AND SELF-ERECTING CRANES |
| I.S. EN 1570-1:2011 | SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS |
| I.S. EN 13000:2010 | Cranes - Mobile cranes |
| EN 13000:2010+A1:2014 | Cranes - Mobile cranes |
| ISO 12482:2014 | Cranes Monitoring for crane design working period |
| DIN EN 1495:2009-12 | Lifting platforms - Mast climbing work platforms (includes Amendment A2:2009) |
| BS EN 13000 : 2010 | CRANES - MOBILE CRANES |
| CSA S826 SERIES : 2001 : R2016 | FERRY BOARDING FACILITIES |
| I.S. EN 14010:2004 | |
| DIN EN 1570:1998-08 | SAFETY REQUIREMENTS FOR LIFTING TABLES |
| EN 13135-2:2004+A1:2010 | Cranes - Equipment - Part 2: Non-electrotechnical equipment |
| ISO 20332:2016 | Cranes Proof of competence of steel structures |
| BS DD237(1996) : 1996 | BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - CLASSIFICATION |
| PD ISO/TR 19961:2010 | Cranes. Safety code on mobile cranes |
| 04/19993045 DC : 0 | EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| 03/106314 DC : 0 | BS PQIR - CRANES - CONDITION MONITORING - PART 1: SPECIFICATION FOR DATA LOGGING EQUIPMENT |
| 02/710617 DC : 0 | BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| 11/30242006 DC : DRAFT SEP 2011 | BS ISO 16625 - CRANES AND HOISTS - SELECTION OF WIRE ROPES, DRUMS AND SHEAVES |
| 06/30151043 DC : DRAFT JUN 2006 | BS ISO 4301-2 - CRANES - CLASSIFICATION - PART 2: MOBILE CRANES |
| BS ISO 10972-1:1998 | Cranes. Requirements for mechanisms General |
| DIN EN 1570-1:2015-01 | Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings (includes Amendment A1:2014) |
| BS ISO 20332:2016 | Cranes. Proof of competence of steel structures |
| ISO 4301-4:1989 | Cranes and related equipment — Classification — Part 4: Jib cranes |
| 16/30341165 DC : 0 | BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| B354.9-17 | Design, calculations, safety requirements, and test methods for mast climbing work platforms (MCWPs) |
| ISO/TR 25599:2005 | Cranes Jib cranes International Standards for design, manufacturing, use and maintenance requirements and recommendations |
| I.S. EN 14492-2:2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 13000:2014-11 | CRANES - MOBILE CRANES |
| DIN EN 14010:2009-12 | Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages (includes Amendment A1:2009) |
| DIN EN 15011:2014-09 | Cranes - Bridge and gantry cranes (includes Amendment A1:2014) |
| UNE-EN 13135-2:2005 | Cranes - Equipment - Part 2: Non-electrotechnical equipment |
| I.S. EN 14492-1:2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| DIN EN 1570:2009-12 | SAFETY REQUIREMENTS FOR LIFTING TABLES |
| DIN EN 14492-1:2010-06 | Cranes - Power driven winches and hoists - Part 1: Power driven winches (includes Amendment A1:2009) |
| I.S. EN 818-7:2002 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT) |
| EN 15011:2011+A1:2014 | Cranes - Bridge and gantry cranes |
| CSA S826 SERIES : 2001 : R2006 | FERRY BOARDING FACILITIES |
| I.S. EN 1495:1998 | LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS |
| VDI 2485:2014-04 | Planning of maintenance for cranes |
| 12/30266226 DC : 0 | BS ISO 16716 - CRANES - MONITORING FOR CRANE DESIGN LIFE |
| BS ISO 12482:2014 | Cranes. Monitoring for crane design working period |
| PREN 14492-1 : DRAFT 2015 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| ISO 4301-3:1993 | Cranes Classification Part 3: Tower cranes |
| BS ISO 16625:2013 | Cranes and hoists. Selection of wire ropes, drums and sheaves |
| ISO 3077:2001 | Short-link chain for lifting purposes — Grade T, (types T, DAT and DT), fine-tolerance hoist chain |
| ISO 16369:2007 | Elevating work platforms Mast-climbing work platforms |
| ISO 4308-1:2003 | Cranes and lifting appliances Selection of wire ropes Part 1: General |
| ISO 14518:2005 | Cranes — Requirements for test loads |
| ISO 4309:2017 | Cranes — Wire ropes — Care and maintenance, inspection and discard |
| ISO 12482-1:1995 | Cranes Condition monitoring Part 1: General |
| BS EN 13135-2 : 2004 | CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT |
| BS EN 1495 : 1998 | LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS |
| BS EN 1570 : 1999 | SAFETY REQUIREMENTS FOR LIFTING TABLES |
| EN 1570:1998+A2:2009 | Safety requirements for lifting tables |
| UNI EN 1495 : 2009 | LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS |
| UNI EN 13135-2 : 2010 | CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT |
| UNI EN 1570 : 2009 | SAFETY REQUIREMENTS FOR LIFTING TABLES |
| UNI EN 815 : 2009 | SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS |
| UNI EN 996 : 2009 | PILING EQUIPMENT - SAFETY REQUIREMENTS |
| UNI EN 818-7 : 2008 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT) |
| UNI EN 13000 : 2014 | CRANES - MOBILE CRANES |
| UNI EN 14492-2 : 2009 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| UNI EN 14010 : 2009 | SAFETY OF MACHINERY - EQUIPMENT FOR POWER DRIVEN PARKING OF MOTOR VEHICLES - SAFETY AND EMC REQUIREMENTS FOR DESIGN, MANUFACTURING, ERECTION AND COMMISSIONING STAGES |
| UNI EN 14492-1 : 2009 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| ISO 16881-1:2005 | Cranes — Design calculation for rail wheels and associated trolley track supporting structure — Part 1: General |
| 14/30298206 DC : 0 | BS EN 1570-2 - SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S |
| DIN 56950-1:2012-05 | ENTERTAINMENT TECHNOLOGY - MACHINERY INSTALLATIONS - PART 1: SAFETY REQUIREMENTS AND INSPECTIONS |
| 00/707658 DC : DRAFT APR 2000 | PREN 13852-2 - CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT |
| ISO 9374-3:2014 | Cranes Information to be provided for enquiries, orders, offers and supply Part 3: Tower cranes |
| 12/30252148 DC : 0 | BS ISO 17440 - CRANES - GENERAL DESIGN - LIMIT STATES AND PROOF OF COMPETENCE OF FORGED STEEL HOOKS |
| BS ISO 17440:2014 | Cranes. General design. Limit states and proof of competence of forged steel hooks |
| NF ISO 16881-1 : 2005 | CRANES - DESIGN CALCULATION FOR RAIL WHEELS AND ASSOCIATED TROLLEY TRACK SUPPORTING STRUCTURE - PART 1: GENERAL |
| PD ISO/TR 25599:2006 | Cranes. Jib cranes. International standards for design, manufacturing, use and maintenance requirements and recommendations |
| CSA B354.5 : 2007 : INC : UPD 1 : 2008 : R2011 | MAST-CLIMBING WORK PLATFORMS |
| 16/30335967 DC : 0 | BS ISO 4309 - CRANES - WIRE ROPES - CARE AND MAINTENANCE, INSPECTION AND DISCARD |
| CSA B354.5:2007 | MAST-CLIMBING WORK PLATFORMS |
| NF ISO 4309 : 2018 | CRANES - WIRE ROPES - CARE AND MAINTENANCE, INSPECTION AND DISCARD |
| ISO/TR 19961:2010 | Cranes — Safety code on mobile cranes |
| I.S. EN 15011:2011 | CRANES - BRIDGE AND GANTRY CRANES |
| DIN EN 818-7:2008-07 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT) |
| BS EN 815 : 1997 | SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS |
| 17/30357380 DC : 0 | BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES |
| BS EN 818-7 : 2002 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT) |
| BS EN 996 : 1996 | PILING EQUIPMENT - SAFETY REQUIREMENTS |
| BS EN 14492-1 : 2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| BS EN 14010 : 2003 | |
| BS EN 15011 : 2011 | CRANES - BRIDGE AND GANTRY CRANES |
| 10/30218104 DC : 0 | BS EN 15011 - CRANES - BRIDGE & GANTRY CRANES |
| UNE-EN 13000:2010 | Cranes - Mobile cranes |
| EN 1570-1:2011+A1:2014 | Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings |
| EN 996:1995+A3:2009 | Piling equipment - Safety requirements |
| EN 818-7:2002+A1:2008 | Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) |
| EN 815:1996+A2:2008 | Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock - Safety requirements |
| EN 14010:2003+A1:2009 | Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages |
| 97/713936 DC : DRAFT AUG 1997 | PREN 13000 - CRANES - SAFETY - MOBILE CRANES |
| 04/30122476 DC : 0 | EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| BS ISO 8686-5 : 2017 | CRANES - DESIGN PRINCIPLES FOR LOADS AND LOAD COMBINATIONS - PART 5: OVERHEAD TRAVELLING AND PORTAL BRIDGE CRANES |
| UNI ISO 4301-2 : 2011 | CRANES - CLASSIFICATION - PART 2: MOBILE CRANES |
| BIS IS 14475-1 : 1997(R2008) | CRANES - CONDITION MONITORING - PART 1: GENERAL |
| 08/30180969 DC : DRAFT APR 2008 | BS EN 1570 - SAFETY REQUIREMENTS FOR LIFTING TABLES |
| UNI ISO 4309 : 2011 | CRANES - WIRE ROPES - CARE AND MAINTENANCE, INSPECTION AND DISCARD |
| ISO 4301-2:2009 | Cranes Classification Part 2: Mobile cranes |
| DIN EN 14492-2:2016-08 (Draft) | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 13135-2:2011-07 | CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT |
| DIN EN 14492-1:2015-05 (Draft) | Cranes - Power driven winches & hoists - part 1 power driven winches; German and English version prEN 14492-1:2015 |
| BS EN 14492-2 : 2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 14492-2:2010-05 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 815:1996-11 | SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS |
| DIN EN 815:2009-12 | SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS |
| UNI EN 15011 : 2014 | CRANES - BRIDGE AND GANTRY CRANES |
| DIN EN 996:2010-02 | PILING EQUIPMENT - SAFETY REQUIREMENTS |
| UNE-EN 15011:2011 | Cranes - Bridge and gantry cranes |
| ONORM EN 1570-1 : 2014 | SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS |
| UNE-EN 1570-1:2012 | Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings |
| ISO 8686-1:2012 | Cranes — Design principles for loads and load combinations — Part 1: General |
| ISO 20332:2016 | Cranes Proof of competence of steel structures |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.