ISO 3:1973
Current
Current
The latest, up-to-date edition.
Preferred numbers Series of preferred numbers
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
04-01-1973
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Preferred numbers are the conventionally rounded of term values of geometrical series, including the integral powers of 10 and having as ratios special factors in accordance with the specified tables. Basic, expectional, R 80 and derived series are designated.
| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| AS 2752-1985 | Identical |
| NBN C 83 200 : 1984 | Identical |
| NEN 3070 : 1977 | Identical |
| BS 2045:1965 | Identical |
| NBN E 48 007 : 1983 | Identical |
| NFX 01 001 : 1967 | Similar to |
| NBN C 83 160 : 1984 | Identical |
| BIS IS 1076-1 : 1985(R2016) | Identical |
| NBN C 83 250 : 1984 AMD 1 1988 | Identical |
| NS 379 : 2ED 1972 | Similar to |
| AS 2751 SUPP 2-1989 | Identical |
| PNE 82005 | Identical |
| UNE-EN ISO 15494:2016 | Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015) |
| I.S. 329:2015 | GAS DISTRIBUTION MAINS (EDITION 3) |
| ISO 11299-3:2011 | Plastics piping systems for renovation of underground gas supply networks Part 3: Lining with close-fit pipes |
| BS EN 60317-0-6:2001 | Specifications for particular types of winding wires General requirements. Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire |
| BS EN 140200:1997 | Harmonized system of quality assessment for electronic components. Sectional specification: fixed power resistors |
| 12/30255878 DC : 0 | BS ISO 17885 - PLASTICS PIPING SYSTEMS - MECHANICAL FITTINGS FOR PRESSURE PIPING SYSTEMS - SPECIFICATIONS |
| 96/209014 DC : DRAFT JUL 1996 | PREN 132900 - SECTIONAL SPECIFICATION - HIGH VOLTAGE CERAMIC CAPACITORS |
| BS EN 130200:1993 | Harmonized system of quality assessment for electronic components. Sectional specification: fixed tantalum capacitors with non-solid or solid electrolyte |
| BS ISO 8085-1:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications Fittings for socket fusion using heated tools |
| BS ISO 8535-1:2016 | Diesel engines. Steel tubes for high-pressure fuel injection pipes Requirements for seamless cold-drawn single-wall tubes |
| DIN EN ISO 4064-1:2016-09 (Draft) | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS (ISO 4064-1:2014) |
| 07/30164841 DC : 0 | EN 4199-004 - AEROSPACE SERIES - BONDING STRAPS FOR AIRCRAFT - PART 004: ROUND BONDING STRAPS, COPPER, TIN PLATED -65 DEGREE C UP TO 150 DEGREE C AND NICKEL PLATED -65 DEGREE C UP TO 260 DEGREE C - PRODUCT STANDARD |
| ISO 8572:1991 | Pipes and fittings made of glass-reinforced thermosetting plastics (GRP) — Definitions of terms relating to pressure, including relationships between them, and terms for installation and jointing |
| 11/30217189 DC : 0 | BS EN ISO 4064-1 - WATER METERS INTENDED FOR THE METERING OF COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| 08/30092426 DC : DRAFT JULY 2008 | BS ISO 12162 - THERMOPLASTICS MATERIALS FOR PIPES AND FITTINGS FOR PRESSURE APPLICATIONS - CLASSIFICATION, DESIGNATION COEFFICIENT, AND DESIGNATION |
| I.S. EN 60384-19:2015 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 19: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS |
| AIIM MS51 : 0 | MICROGRAPHICS - ISO RESOLUTION TEST CHART NO 2 - DESCRIPTION AND USE |
| 17/30358564 DC : 0 | BS ISO 8100-30 - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 30: CLASS 1, 2, 3 AND 4 LIFTS INSTALLATION |
| CEI EN 60947-7-3 : 2011 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-3: ANCILLARY EQUIPMENT - SAFETY REQUIREMENTS FOR FUSE TERMINAL BLOCKS |
| 03/316256 DC : DRAFT OCT 2003 | EN ISO 8469 - SMALL CRAFT - NON-FIRE-RESISTANT FUEL HOSES |
| BS EN ISO 11299-3:2013 | Plastics piping systems for renovation of underground gas supply networks Lining with close-fit pipes |
| IEC 61045-1:1991 | Fixed film resistor networks for use in electronic equipment - Part 1: Generic specification |
| UNI EN ISO 21003-1 : 2009 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL |
| 17/30363224 DC : 0 | BS EN 60317-0-8 - SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-8: GENERAL REQUIREMENTS - POLYESTER GLASS FIBRE WOUND, RESIN OR VARNISH IMPREGNATED OR NOT IMPREGNATED, BARE OR ENAMELLED RECTANGULAR COPPER WIRE |
| 08/30174014 DC : DRAFT JUNE 2008 | BS ISO 11298-3 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT-PIPES |
| 13/30284348 DC : 0 | BS EN 60317-0-9 - SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-9: GENERAL REQUIREMENTS - ENAMELLED RECTANGULAR ALUMINIUM WIRE |
| 13/30268516 DC : 0 | BS ISO 3320 - FLUID POWER SYSTEMS AND COMPONENTS - CYLINDER BORES AND PISTON ROD DIAMETERS AND AREA RATIOS - METRIC SERIES |
| 05/30138794 DC : DRAFT SEP 2005 | |
| ISO 8535-1:2016 | Diesel engines Steel tubes for high-pressure fuel injection pipes Part 1: Requirements for seamless cold-drawn single-wall tubes |
| BS ISO 5782-2:1997 | Pnuematic fluid power. Compressed air filters Test methods to determine the main characteristics to be included in supplier\'s literature |
| I.S. EN 14409-3:2004 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE FIT-PIPES |
| 12/30247148 DC : 0 | BS ISO 8469 - SMALL CRAFT - NON-FIRE-RESISTANT FUEL HOSES |
| BS EN 60317-52:2014 | Specifications for particular types of winding wires Aromatic polyamide (aramid) tape wrapped round copper wire, temperature index 220 |
| 02/121564 DC : DRAFT APR 2002 | BS EN 14409-3 - PLASTICS PIPING SYSTEMS FOR THE RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE FIT-PIPES |
| NF EN 60269-4 : 2010 AMD 2 2017 | LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES |
| 17/30351670 DC : 0 | BS ISO 4065 - THERMOPLASTICS PIPES - UNIVERSAL WALL THICKNESS TABLE |
| 17/30363845 DC : 0 | BS ISO 21927-3 - SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT EXHAUST VENTILATORS |
| BS ISO 10931-1:1997 | Plastics piping systems for industrial applications. Poly (vinylidene fluoride) General |
| I.S. EN 60384-11:2008 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 11: SECTIONAL SPECIFICATION - FIXED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS |
| ISO 21358:2007 | Vacuum technology Right-angle valve Dimensions and interfaces for pneumatic actuator |
| 18/30365751 DC : 0 | BS ISO 5289 - AGRICULTURAL MACHINERY - ENDLESS HEXAGONAL BELTS AND GROOVE SECTIONS OF CORRESPONDING PULLEYS |
| TBR 038 : 20001 | PUBLIC SWITCHED TELEPHONE NETWORK (PSTN) - ATTACHMENT REQUIREMENTS FOR A TERMINAL EQUIPMENT INCORPORATING AN ANALOGUE HANDSET FUNCTION CAPABLE OF SUPPORTING THE JUSTIFIED CASE SERVICE WHEN CONNECTED TO THE ANALOGUE INTERFACE OF THE PSTN IN EUROPE |
| TS 103 739 : 1.1.2 | SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); TRANSMISSION REQUIREMENTS FOR WIDEBAND WIRELESS TERMINALS (HANDSET AND HEADSET) FROM A QOS PERSPECTIVE AS PERCEIVED BY THE USER |
| ISO 161-2:1996 | Thermoplastics pipes for the conveyance of fluids — Nominal outside diameters and nominal pressures — Part 2: Inch-based series |
| UNI ISO 4190-1 : 2013 | LIFT (ELEVATOR) INSTALLATION - PART 1: CLASS 1, 2, 3 AND 6 LIFT |
| 13/30280432 DC : 0 | BS ISO 16422 - PIPES AND JOINTS MADE OF ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) FOR THE CONVEYANCE OF WATER UNDER PRESSURE - SPECIFICATIONS |
| BS EN 134100:1996 | Harmonized system of quality assessment for electronic components. Sectional specification: variable capacitors (Qualification approval) |
| 05/30135633 DC : DRAFT JUN 2005 | IEC 60269-1 ED 4 - LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS |
| 08/30169640 DC : 0 | BS ISO 17089-1 - MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - ULTRASONIC METERS FOR GAS - PART 1: METERS FOR CUSTODY TRANSFER AND ALLOCATION MEASUREMENT |
| BS ISO 5596:1999 | Hydraulic fluid power. Gas-loaded accumulators with separator. Ranges of pressures and volumes and characteristic quantities |
| 10/30215969 DC : 0 | BS EN 60127-7 - MINIATURE FUSES - PART 7: MINIATURE FUSE-LINKS FOR SPECIAL APPLICATIONS |
| CEI EN 133100 : 1999 | SECTIONAL SPECIFICATION: PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - FILTERS FOR WHICH SAFETY TESTS ARE NOT REQUIRED |
| I.S. EN 60059:1999 | IEC STANDARD CURRENT RATINGS |
| BS ISO 3669:2017 | Vacuum technology. Bakeable flanges. Dimensions of knife-edge flanges |
| BS EN 60127-2:2014 | Miniature fuses Cartridge fuse-links |
| BS PD ISO/IEC PAS 60127-8 : 2014 | MINIATURE FUSES - PART 8: FUSE RESISTORS WITH PARTICULAR OVERCURRENT PROTECTION |
| BS ISO 8535-2:2003 | Compression ignition engines. Steel tubes for high pressure fuel injection pipes Requirements for composite tubes |
| BS ISO 8085-3:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications Electrofusion fittings |
| 14/30315320 DC : 0 | BS EN 60384-15 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 15: SECTIONAL SPECIFICATION: FIXED TANTALUM CAPACITORS WITH NON-SOLID OR SOLID ELECTROLYTE |
| I.S. EN 140210:1994 | FIXED POWER RESISTORS - CAPABILITY APPROVAL (SECTIONAL SPECIFICATION) |
| BS ISO 6580:2005 | General-purpose industrial fans. Circular flanges. Dimensions |
| PD IEC/TS 62886:2016 | Electroacoustics. Hearing aids. Method for measuring electroacoustic performance up to 16 kHz |
| BS EN 60384-4:2016 | Fixed capacitors for use in electronic equipment Sectional specification. Fixed aluminium electrolytic capacitors with solid (MnO<sub>2</sub>) and non-solid electrolyte |
| CEI EN 60384-11 : 2008 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 11: SECTIONAL SPECIFICATION - FIXED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS |
| 12/30257534 DC : 0 | BS ISO 18225 - PLASTICS PIPING SYSTEMS - MULTILAYER PIPING SYSTEMS FOR OUTDOOR GAS INSTALLATIONS - SPECIFICATIONS FOR SYSTEMS |
| I.S. EN 60317-0-8:2012 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-8: GENERAL REQUIREMENTS - POLYESTER GLASS FIBRE WOUND, RESIN OR VARNISH IMPREGNATED OR NOT IMPREGNATED, BARE OR ENAMELED RECTANGULAR COPPER WIRE (IEC 60317-0-8:2012 (EQV)) |
| BS EN 60938-2:2000 | Fixed inductors for electromagnetic interference suppression Sectional specification |
| 12/30247145 DC : 0 | BS ISO 7840 - SMALL CRAFT - FIRE-RESISTANT FUEL HOSES |
| I.S. EN ISO 11299-3:2013 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES (ISO 11299-3:2011) |
| 09/30202136 DC : 0 | BS EN ISO 32100 - RUBBER- OR PLASTICS-COATED FABRICS - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF FLEX RESISTANCE BY THE FLEXOMETER METHOD |
| BS EN ISO 13351:2009 | Fans. Dimensions |
| 05/30089171 DC : DRAFT FEB 2005 | ISO 283 - CONVEYOR BELTS - FULL THICKNESS TENSILE STRENGTH AND ELONGATION - SPECIFICATIONS AND METHOD OF TEST |
| 03/104580 DC : DRAFT MAR 2003 | IEC 60384-9 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 9: SECTIONAL SPECIFICATION - FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2 |
| DIN EN ISO 3821:2016-10 (Draft) | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| 08/30172449 DC : DRAFT APR 2008 | BS ISO 8779 - PLASTICS PIPING SYSTEMS - POLYETHYLENE (PE) PIPES FOR IRRIGATION - SPECIFICATIONS |
| PREN 2672 : 200P1 | AEROSPACE SERIES - DESIGN AND CONSTRUCTION OF PIPELINES FOR FLUIDS IN LIQUID OR GASEOUS CONDITION - DESIGN OF RIGID LINES |
| 17/30355848 DC : 0 | BS EN 60384-22 ED.3.0 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2 |
| BS 8588:2017 | Polyethylene pressure pipe with an aluminium barrier layer and associated fittings for potable water supply in contaminated land. Size 20 mm to 630 mm |
| I.S. EN 60317-43:1998 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 43: AROMATIC POLYIMIDE TAPE WRAPPED ROUND COPPER WIRE, CLASS 240 |
| BS EN 60384-1:2016 | Fixed capacitors for use in electronic equipment Generic specification |
| TS 101 377-3-13 : 1.1.1 | GEO-MOBILE RADIO INTERFACE SPECIFICATIONS; PART 3: NETWORK SPECIFICATIONS; SUB-PART 13: TRANSMISSION PLANNING ASPECTS OF THE SPEECH SERVICE IN THE PUBLIC SATELLITE MOBILE NETWORK (PSMN) SYSTEM; GMR-2 03.050 |
| 02/206102 DC : DRAFT MAY 2002 | IEC 60384-21, ED.1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC - CLASS 1 - ASSESSMENT LEVEL EZ |
| 05/30130970 DC : DRAFT MAR 2005 | ISO 283 - CONVEYOR BELTS - FULL THICKNESS TENSILE STRENGTH AND ELONGATION - SPECIFICATIONS AND METHOD OF TEST |
| 07/30167951 DC : 0 | BS EN 60076-1 - POWER TRANSFORMERS - PART 1: GENERAL |
| NF ISO 5596 : 2000 | HYDRAULIC FLUID POWER - GAS-LOADED ACCUMULATORS WITH SEPARATOR - RANGES OF PRESSURES AND VOLUMES AND CHARACTERISTIC QUANTITIES |
| 05/30132152 DC : DRAFT APR 2005 | ISO 21004 - PLASTICS PIPING SYSTEMS - MULTILAYER PIPES AND THEIR JOINTS, BASED ON THERMOPLASTICS, FOR WATER SUPPLY |
| BIS IS 13730-44 : 2013 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 44: AROMATIC POLYMIDE TAPE WRAPPED RECTANGULAR COPPER WIRE, CLASS 240 |
| I.S. EN 60384-18:2016 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH SOLID (MNO[2]) AND NON-SOLID ELECTROLYTE |
| I.S. EN 60384-17:2005 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 17: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC A.C. AND PULSE CAPACITORS |
| ISO 17484-1:2014 | Plastics piping systems — Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) — Part 1: Specifications for systems |
| CEI EN 60269-6 : 2012 | LOW-VOLTAGE FUSES - PART 6: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SOLAR PHOTOVOLTAIC ENERGY SYSTEMS |
| ASTM D 2992 : 2012 | Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings |
| 05/30125053 DC : DRAFT MAY 2005 | ISO 6301-2 - PNEUMATIC FLUID POWER - COMPRESSED AIR LUBRICANTS - PART 2: TEST METHODS TO DETERMINE THE MAIN CHARACTERISTICS TO BE INCLUDED IN THE SUPPLIERS LITERATURE |
| 09/30195768 DC : 0 | BS ISO 6224 - THERMOPLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
| BS EN 60127-6:2014 | Miniature fuses Fuse-holders for miniature fuse-links |
| I.S. EN 60034-30:2009 | ROTATING ELECTRICAL MACHINES - PART 30: EFFICIENCY CLASSES OF SINGLE-SPEED, THREE-PHASE, CAGE-INDUCTION MOTORS |
| ISO 4437:2007 | Buried polyethylene (PE) pipes for the supply of gaseous fuels Metric series Specifications |
| GOST ISO 4065 : 2005 ERRATA 2008 | THERMOPLASTICS PIPES - UNIVERSAL WALL THICKNESS TABLE |
| EN 1555-1:2010 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General |
| ISO 446:2004 | Micrographics — ISO character and ISO test chart No. 1 — Description and use |
| PREN 4301 : 200P1 | AEROSPACE SERIES - IDENTIFICATION MARKING METHODS FOR ENGINE ITEMS - ENGINEERING REQUIREMENTS |
| PREN 4199-004 : 200P3 | AEROSPACE SERIES - BONDING STRAPS FOR AIRCRAFT - PART 004: ROUND BONDING STRAPS, COPPER, TIN PLATED -65 DEGREES C UP TO 150 DEGREES C AND NICKEL PLATED -65 DEGREES C UP TO 260 DEGREES C - PRODUCT STANDARD |
| ISO 4783-3:1981 | Industrial wire screens and woven wire cloth — Guide to the choice of aperture size and wire diameter combinations — Part 3: Preferred combinations for pre-crimped or pressure-welded wire screens |
| I.S. EN 4199-004:2014 | AEROSPACE SERIES - BONDING STRAPS FOR AIRCRAFT - PART 004: ROUND BONDING STRAPS, COPPER, TIN PLATED -65 DEGREES C UP TO 150 DEGREES C AND NICKEL PLATED -65 DEGREES C UP TO 260 DEGREES C - PRODUCT STANDARD |
| ISO/TR 4191:2014 | Plastics piping systems for water supply Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) Guidance for installation |
| CEI EN 60384-17 : 2006 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 17: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC A.C. AND PULSE CAPACITORS |
| CEI EN 130100 : 1998 | SECTIONAL SPECIFICATION - FIXED POLYETHYLENE-TEREPHTALATE FILM DIELECTRIC METAL FOIL CAPACITORS FOR DIRECT CURRENT |
| CEI EN 60384-13 : 2013 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 13: SECTIONAL SPECIFICATION - FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS |
| ISO 4878:1981 | Textiles Flat woven webbing slings made of man-made fibre |
| S.R. CEN/TS 15223:2017 | PLASTICS PIPING SYSTEMS - VALIDATED DESIGN PARAMETERS OF BURIED THERMOPLASTICS PIPING SYSTEMS |
| UNI EN ISO 11299-3 : 2013 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES |
| I.S. EN 60127-5:2017 | MINIATURE FUSES - PART 5: GUIDELINES FOR QUALITY ASSESSMENT OF MINIATURE FUSE-LINKS |
| BS EN 60384-23:2015 | Fixed capacitors for use in electronic equipment Sectional specification. Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors |
| I.S. EN ISO 8596:2018 | OPHTHALMIC OPTICS - VISUAL ACUITY TESTING - STANDARD AND CLINICAL OPTOTYPES AND THEIR PRESENTATION (ISO 8596:2017) |
| I.S. EN ISO 8029:2014 | PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION (ISO 8029:2014) |
| I.S. EN 60384-15:2017 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 15: SECTIONAL SPECIFICATION: FIXED TANTALUM CAPACITORS WITH NON-SOLID OR SOLID ELECTROLYTE |
| BS EN 60317-44 : 1997 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 44: AROMATIC POLYIMIDE TAPE WRAPPED RECTANGULAR COPPER WIRE, CLASS 240 |
| I.S. EN 60384-20:2015 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 20: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYPHENYLENE SULFIDE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS |
| I.S. EN 60947-7-3:2009 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-3: ANCILLARY EQUIPMENT - SAFETY REQUIREMENTS FOR FUSE TERMINAL BLOCKS |
| UNI CEI EN ISO 4064-1 : 2014 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| CEI EN 60317-0-7 : 2012 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-7: GENERAL REQUIREMENTS - FULLY INSULATED (FIW) ZERODEFECT ENAMELLED ROUND COPPER WIRE |
| BIS IS 13730-43 : 2013 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 43: AROMATIC POLYMIDE TAPE WRAPPED ROUND COPPER WIRES, CLASS 240 |
| S.R. CLC/TS 60034-31:2011 | ROTATING ELECTRICAL MACHINES - PART 31: SELECTION OF ENERGY-EFFICIENT MOTORS INCLUDING VARIABLE SPEED APPLICATIONS - APPLICATION GUIDE |
| BS 3734-1:1997 | Rubber. Tolerances for products Dimensional tolerances |
| BS ISO 8039:2014 | Microscopes. Values, tolerances and symbols for magnification |
| 17/30363921 DC : 0 | BS EN 17176-2 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE GROUND DRAINAGE, SEWERAGE AND IRRIGATION UNDER PRESSURE - ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) - PART 2: PIPES |
| EN 12261:2018 | Gas meters - Turbine gas meters |
| ISO 8419:2003 | Belt drives — Narrow V-belts — Sections 9N/J, 15N/J and 25N/J (lengths in the effective system) |
| NF ISO 1174-1 : 2011 | ASSEMBLY TOOLS FOR SCREWS AND NUTS - DRIVING SQUARES - PART 1: DRIVING SQUARES FOR HAND SOCKET TOOLS |
| ISO 11298-3:2010 | Plastics piping systems for renovation of underground water supply networks Part 3: Lining with close-fit pipes |
| IEC 61253-1:1993 | Piezoelectric ceramic resonators - A specification in the IEC quality assessment system for electronic components (IECQ) - Part 1: Generic specification - Qualification approval |
| ASTM D 8072 : 2017 | Standard Classification for Reporting Solids and Insoluble Water Contamination of Hydrocarbon-Based Petroleum Products When Analyzed by Imaging Instrumentation |
| TS 103 220 : 1.1.1 | SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); TRANSMISSION REQUIREMENTS FOR SUPERWIDEBAND HANDHELD (HANDSET AND HANDSFREE) TERMINALS FROM A QOS PERSPECTIVE AS PERCEIVED BY THE USER |
| I.S. EN ISO 3821:2010 | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| I.S. EN 129200:1994 | SECTIONAL SPECIFICATION: FIXED INDUCTORS WITH CERAMIC OR FERRITE CORE WOUND WITH COPPER WIRE FOR RF CIRCUITS |
| ISO 14531-2:2004 | Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 2: Fittings for heat-fusion jointing |
| UNE-EN ISO 11298-3:2011 | Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2010) |
| ISO 6580:2005 | General-purpose industrial fans Circular flanges Dimensions |
| UNI EN 1555-1 : 2011 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL |
| EN 60077-5:2003 | Railway applications - Electrotechnical equipment for rolling stock - Part 5: Electrotechnical components - Rules for HV fuses |
| DIN EN 12007-2:2012-10 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 2: SPECIFIC FUNCTIONAL REQUIREMENTS FOR POLYETHYLENE (MOP UP TO AND INCLUDING 10 BAR) |
| DIN EN 12201-1:2011-11 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General |
| UNE-EN 60317-53:2014 | Specifications for particular types of winding wires - Part 53: Aromatic polyamide (aramid) tape wrapped rectangular copper wire, temperature index 220 |
| IEC 60384-17:2005 | Fixed capacitors for use in electronic equipment - Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors |
| BS EN 61558-1 : 2005 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| BS EN 12101-3:2015 | Smoke and heat control systems Specification for powered smoke and heat control ventilators (Fans) |
| BS EN 13244-1:2002 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage. Polyethylene (PE) General |
| IEC 60127-2:2014 | Miniature fuses - Part 2: Cartridge fuse-links |
| BS EN 1555-1:2010 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) General |
| UNE-EN ISO 6224:2012 | Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2011) |
| NF EN 60384-16 : 2006 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 16: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC D.C. CAPACITORS |
| IEC 60384-1:2016 RLV | Fixed capacitors for use in electronic equipment - Part 1: Generic specification |
| EN 60384-22:2012 | Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 |
| EN 60269-1:2007/A2:2014 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS (IEC 60269-1:2006/A2:2014) |
| EN 12101-3:2015 | Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans) |
| EN 130300:1998 | Sectional Specification: Aluminium electrolytic capacitors with solid and non-solid electrolyte |
| DIN EN 14154-2:2011-06 | WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE |
| EN 130100:1997 | Sectional Specification: Fixed polyethylene-terephtalate film dielectric metal foil capacitors for direct current |
| EN 60947-7-3:2009 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-3: ANCILLARY EQUIPMENT - SAFETY REQUIREMENTS FOR FUSE TERMINAL BLOCKS |
| EN 12201-1:2011 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General |
| DIN EN 1452-1:1999-09 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL |
| OVE/ONORM EN 60317-0-2 : 2014 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-2: GENERAL REQUIREMENTS - ENAMELLED RECTANGULAR COPPER WIRE (IEC 60317-0-2:2013) |
| EN 60384-18:2016 | Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte |
| EN 60384-8:2015/AC:2017-09 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 (IEC 60384-8:2015/COR1:2017) |
| EN 60384-3:2016 | Fixed capacitors for use in electronic equipment - Part 3: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with solid (MnO2) electrolyte |
| EN 60127-4:2005/A2:2013 | Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types |
| EN 61558-1:2005/A1:2009 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| DIN EN 13244-1:2003-04 | PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES, DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 1: GENERAL |
| EN 134000:1994 | Generic Specification: Variable capacitors (Qualification approval and capability approval) |
| EN 13244-1:2002 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 1: General |
| EN 133200:1999 | Sectional Specification: Passive filter units for electromagnetic interference suppression (Filters for which safety tests are required) |
| EN 60384-6 : 2005 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 6: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYCARBONATE FILM DIELECTRIC D.C. CAPACITORS |
| EN 60317-52:2014 | Specifications for particular types of winding wires - Part 52: Aromatic polyamide (aramid) tape wrapped round copper wire, temperature index 220 |
| EN 61797-1:1996 | Transformers and inductors for use in telecommunication and electronic equipment - Main dimensions of coil formers - Part 1: Coil formers for laminated cores |
| EN 60034-30-1:2014 | Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code) |
| EN 129000:1993/A1:1995 | GENERIC SPECIFICATION - FIXED RF WOUND INDUCTORS |
| EN 12007-2:2012 | Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional requirements for polyethylene (MOP up to and including 10 bar) |
| EN 61050:1992/A1:1995 | TRANSFORMERS FOR TUBULAR DISCHARGE LAMPS HAVING A NON LOAD OUTPUT VOLTAGE EXCEEDING 1000 V (GENERALLY CALLED NEON TRANSFORMERS - GENERAL AND SAFETY REQUIREMENTS |
| EN 60384-20:2015 | Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors |
| EN 129100 : 93 AMD 1 95 | SECTIONAL SPECIFICATION: WIREWOUND SURFACE MOUNTING INDUCTORS |
| EN 300 176-2 : 2.2.1 | DIGITAL ENHANCED CORDLESS TELECOMMUNICATIONS (DECT); TEST SPECIFICATION; PART 2: AUDIO AND SPEECH |
| EN 60317-0-1:2014 | Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire |
| EN 62421:2007 | Electronics assembly technology - Electronic modules |
| EN 131800:1997 | Sectional Specification: Fixed polypropylene film dielectric metal foil d.c. capacitors |
| EN 60269-4:2009/A2:2016 | LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES (IEC 60269-4:2009/A2:2016) |
| EN 60127-5:2017 | Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links |
| EN 60317-0-9:2015 | Specifications for particular types of winding wires - Part 0-9: General requirements - Enamelled rectangular aluminium wire |
| EN 62674-1 : 2012 | HIGH FREQUENCY INDUCTIVE COMPONENTS - PART 1: FIXED SURFACE MOUNT INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT (IEC 62674-1:2012) |
| EN 60317-53:2014 | Specifications for particular types of winding wires - Part 53: Aromatic polyamide (aramid) tape wrapped rectangular copper wire, temperature index 220 |
| EN 60289:1994/A11:2002 | REACTORS |
| EN 60384-23:2015 | Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors |
| EN 132100:1996 | Sectional Specification: Fixed multilayer ceramic surface mounting capacitors - Assessment levels EZ and DZ |
| DIN IEC 60740-2:1995-08 | LAMINATIONS FOR TRANSFORMERS AND INDUCTORS FOR USE IN TELECOMMUNICATION AND ELECTRONIC EQUIPMENT - PART 2: SPECIFICATION FOR THE MINIMUM PERMEABILITIES OF LAMINATIONS MADE OF SOFT MAGNETIC METALLIC MATERIALS |
| BS EN 12261:2002 | Gas meters. Turbine gas meters |
| BS EN ISO 13590:2003 | Small craft. Personal watercraft. Construction and system installation requirements |
| 06/30159832 DC : 0 | BS ISO 10088 - SMALL CRAFT - PERMANENTLY INSTALLED FUEL SYSTEMS |
| UNE-EN 60317-0-8:2012 | Specifications for particular types of winding wires - Part 0-8: General requirements - Polyester glass fibre wound, resin or varnish impregnated or not impregnated, bare or enamelled rectangular copper wire |
| 09/30214333 DC : 0 | BS EN 60384-22 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22: SECTIONAL SPECIFICATION: FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2 |
| BS EN ISO 32100:2010 | Rubber- or plastics-coated fabrics. Physical and mechanical tests. Determination of flex resistance by the flexometer method |
| ISO 22621-1:2007 | Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) Polyamide (PA) Part 1: General |
| I.S. EN 1452-1:1999 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL |
| BS EN 132400:1995 | Harmonized system of quality assessment for electronic components. Sectional specification. Fixed capacitors for electromagnetic interference suppression and connection to the supply mains (Assessment Level D) |
| BS EN 60317-0-8:2012 | Specifications for particular types of winding wires General requirements. Polyester glass fibre wound, resin or varnish impregnated or not impregnated, bare or enamelled rectangular copper wire |
| BS EN 132100:1997 | Harmonized system of quality assessment for electronic components. Sectional specification: fixed mulitlayer ceramic surface mounting capacitors. Assessment levels EZ and DZ |
| XP I ETS 300245-5 : 99 XP | INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - TECHNICAL CHARACTERISTICS OF TELEPHONY TERMINALS - PART 5: WIDEBAND (7 KHZ) HANDSET TELEPHONY |
| 03/101947 DC : DRAFT FEB 2003 | IEC 60939-1 ED.2.0 - PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION |
| BS EN 60384-21:2012 | Fixed capacitors for use in electronic equipment Sectional specification. Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 |
| BS EN ISO 1452-1:2009 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U) General |
| BS EN 129000:1996 | Harmonized system of quality assessment for electronic components. Generic specification. Fixed RF wound inductors |
| BS 6811-7.0(1993) : 1993 AMD 8595 | WINDING WIRES - SPECIFICATIONS FOR PARTICULAR TYPES OF GLASS-FIBRE BRAIDED BARE OR ENAMELLED RECTANGULAR COPPER WINDING WIRES - GENERAL REQUIREMENTS |
| I.S. EN 14408-3:2004 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES |
| 06/30156696 DC : DRAFT OCT 2006 | |
| I.S. EN 13244-1:2002 | PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - GENERAL |
| ISO 3821:2008 | Gas welding equipment Rubber hoses for welding, cutting and allied processes |
| ETS 300 903 : 20004 | DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2+) - TRANSMISSION PLANNING ASPECTS OF THE SPEECH SERVICE IN THE GSM PUBLIC LAND MOBILE NETWORK (PLMN) SYSTEM |
| 12/30266708 DC : 0 | BS EN ISO 4064-1 - WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| 05/30129278 DC : DRAFT FEB 2005 | ISO/DIS 8029-2 - PLASTICS HOSE - GENERAL PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION |
| 04/30126864 DC : DRAFT DEC 2004 | ISO 18225 - PLASTIC PIPING SYSTEMS - MULTILAYER PIPING SYSTEMS FOR OUTDOOR GAS INSTALLATIONS - SPECIFICATIONS FOR SYSTEMS |
| 16/30339693 DC : 0 | BS EN ISO 8596 - OPHTHALMIC OPTICS - VISUAL ACUITY TESTING - STANDARD AND CLINICAL OPTOTYPES AND THEIR PRESENTATION |
| BS ISO 21358:2007 | Vacuum technology. Right-angle valve. Dimensions and interfaces for pneumatic actuator |
| I.S. EN 60384-25:2015 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 25: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE |
| BS EN 60118-0:2015 | Electroacoustics. Hearing aids Measurement of the performance characteristics of hearing aids |
| BS EN 60384-8:2015 | Fixed capacitors for use in electronic equipment Sectional specification: Fixed capacitors of ceramic dielectric, Class 1 |
| BS 2782-11.S 1160A&B(1998) : 1998 | THERMOPLASTICS PIPES FOR INDUSTRIAL APPLICATIONS UNDER PRESSURE - DETERMINATION OF THE CHEMICAL RESISTANCE FACTOR AND OF THE BASIC STRESS - POLYOLEFIN PIPES |
| TS 151 010-1 : 12.7.0 | DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2+) (GSM); MOBILE STATION (MS) CONFORMANCE SPECIFICATION; PART 1: CONFORMANCE SPECIFICATION (3GPP TS 51.010-1 VERSION 13.6.0 RELEASE 13) |
| 09/30195381 DC : 0 | BS EN 60269-6 - LOW-VOLTAGE FUSES - PART 6: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SOLAR PHOTOVOLTAIC ENERGY SYSTEMS |
| 03/104578 DC : DRAFT MAR 2003 | IEC 60384-8 ED. 3.0 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION - FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 |
| NF ISO 3684 : 1990 AMD 1 2006 | CONVEYOR BELTS - DETERMINATION OF MINIMUM PULLEY DIAMETERS |
| BS EN 60384-16:2005 | Fixed capacitors for use in electronic equipment Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors |
| 04/30111632 DC : DRAFT MARCH 2004 | |
| 04/30126871 DC : DRAFT DEC 2004 | ISO 17484-1 - PLASTICS PIPING SYSTEMS - MULTI-LAYERED PIPE SYSTEMS FOR INDOOR GAS INSTALLATIONS WITH A MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 5 BAR - PART 1: SPECIFICATIONS FOR SYSTEMS |
| 16/30340367 DC : 0 | BS 8588 - POLYEPTRHEYSLSEUNREE PIPES WITH AN ALUMINIUM BARRIER LAYER AND ASSOCIATED FITTINGS FOR POTABLE WATER SUPPLY IN CONTAMINATED LAND - SIZE 20 MM TO 630 MM |
| BS ISO 2398 : 1995 AMD 9704 | RUBBER HOSE, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION |
| BS 6811-6.0(1993) : 1993 AMD 8988 | WINDING WIRES - SPECIFICATIONS FOR PARTICULAR TYPES OF GLASS-FIBRE WOUND BARE OR ENAMELLED RECTANGULAR COPPER WINDING WIRES - GENERAL REQUIREMENTS |
| 04/30126883 DC : DRAFT DEC 2004 | ISO 4437 - BURIED POLYETHYLENE (PE) PIPES FOR THE SUPPLY OF GASEOUS FUELS - METRIC SERIES - SPECIFICATIONS |
| 03/115115 DC : DRAFT OCT 2003 | ISO 16422 - PIPES AND JOINTS MADE OF ORIENTED UNPLASTICIZED POLY (VINYL CHLORIDE) (PVC-O) FOR THE CONVEYANCE OF WATER - SPECIFICATIONS |
| 13/30289551 DC : 0 | BS EN 60384-3 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3: SECTIONAL SPECIFICATION: SURFACE MOUNT FIXED TANTALUM ELECTROLYT CAPACITORS WITH MANGANESE DIOXIDE SOLID ELECTROLYTE |
| BS ISO 4156-1:2005 | Straight cylindrical involute splines. Metric module, side fit Generalities |
| 07/30144790 DC : 0 | BS ISO 96-1 - TEXTILE MACHINERY AND ACCESSORIES - RINGS AND TRAVELLERS FOR RING SPINNING AND RING TWISTING FRAMES - PART 1: FLANGE RINGS T AND SF AND THEIR TRAVELLERS |
| BS 6186-1:Addendum No. 1:1993 | Specification for straight cylindrical involute splines: metric module, side fit Inspection |
| 15/30310671 DC : DRAFT FEB 2015 | BS EN ISO 2157 - DENTISTRY - NOMINAL DIAMETERS AND DESIGNATION CODE NUMBERS FOR ROTARY INSTRUMENTS |
| NF EN 300176-2 : 2012 | DIGITAL ENHANCED CORDLESS TELECOMMUNICATIONS (DECT) - TEST SPECIFICATION - PART 2: AUDIO AND SPEECH (V2.2.1) |
| 14/30285999 DC : 0 | BS ISO 104 - ROLLING BEARINGS - THRUST BEARINGS - BOUNDARY DIMENSIONS, GENERAL PLAN |
| 15/30313655 DC : 0 | BS ISO 96-1 - TEXTILE MACHINERY AND ACCESSORIES - RINGS AND TRAVELLERS FOR RING SPINNING AND RING TWISTING FRAMES - PART 1: FLANGE RINGS T AND SF AND THEIR TRAVELLERS |
| ISO 4522-1:1985 | Metallic coatings Test methods for electrodeposited silver and silver alloy coatings Part 1: Determination of coating thickness |
| 11/30228188 DC : 0 | BS ISO 8039 - MICROSCOPES - VALUES, TOLERANCES AND SYMBOLS FOR MAGNIFICATION |
| BS EN 130900:1998 | Harmonized system of quality assessment for electronic components. Sectional specification: fixed polystyrene film dielectric metal foil d.c. capacitors |
| DIN ISO 16486-1:2015-07 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 1: General (ISO 16486-1:2012 + AMD 1:2014) |
| 02/121566 DC : DRAFT APR 2002 | BS EN 14408-3 - PLASTICS PIPING SYSTEMS FOR THE RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES |
| NF EN 60317 0-5 : 2007 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-5: GENERAL REQUIREMENTS - GLASS-FIBRE BRAIDED RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED RECTANGULAR COPPER WIRE |
| DD IEC TS 60034-31 : DRAFT JULY 2010 | ROTATING ELECTRICAL MACHINES - PART 31: SELECTION OF ENERGY-EFFICIENT MOTORS INCLUDING VARIABLE SPEED APPLICATIONS - APPLICATION GUIDE |
| BS EN 60384-19:2015 | Fixed capacitors for use in electronic equipment Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors |
| NF EN 60317-0-8 : 2012 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-8: GENERAL REQUIREMENTS - POLYESTER GLASS FIBRE WOUND, RESIN OR VARNISH IMPREGNATED OR NOT IMPREGNATED, BARE OR ENAMELLED RECTANGULAR COPPER WIRE |
| 02/206104 DC : DRAFT MAY 2002 | IEC 60384-22, ED.1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC - CLASS 2 - ASSESSMENT LEVEL EZ |
| IEC 60852-3:1992 | Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 3: Transformers and inductors using YUI-1 laminations |
| 11/30247355 DC : 0 | BS EN 60034-30 ED 2 - ROTATING ELECTRICAL MACHINES - PART 30: EFFICIENCY CLASSES OF SINGLE-SPEED, THREE-PHASE, CAGE-INDUCTION MOTORS (IE-CODE) |
| BS 2782-11:Method 1121C:1997 | Methods of testing plastics. Thermoplastics pipes, fittings and valves Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures. Inch-based series |
| CEI EN 60317-0-3 : 2014 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-3: GENERAL REQUIREMENTS - ENAMELLED ROUND ALUMINIUM WIRE |
| BS EN 62674-1:2012 | High frequency inductive components Fixed surface mount inductors for use in electronic and telecommunication equipment |
| DIN ISO 96-1:2015-10 (Draft) | TEXTILE MACHINERY AND ACCESSORIES - RINGS AND TRAVELLERS FOR RING SPINNING AND RING TWISTING FRAMES - PART 1: FLANGE RINGS T AND SF AND THEIR TRAVELLERS (ISO 96-1:2016) |
| 04/30081969 DC : DRAFT AUG 2004 | ISO 6993-1 - BURIED, HIGH-IMPACT POLY (VINYL CHLORIDE) (PVC-HI) PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - PART 1: PIPES OPERATING PRESSURE OF 1 BAR (100 KPA) |
| BS EN 60127-3:2015 | Miniature fuses Sub-miniature fuse-links |
| TS 103 189 : 1.1.2 | IMS NETWORK TESTING (INT); SPECIFICATION OF END-TO-END QOS ASSESSMENT FOR VOLTE AND RCS INTEROP EVENTS OR PLUGTESTS |
| 04/30115299 DC : DRAFT JUN 2004 | ISO/DIS 5172 - GAS WELDING EQUIPMENT - BLOWPIPES FOR GAS WELDING, HEATING AND CUTTING - SPECIFICATIONS AND TESTS |
| TBR 010 : 20003 | DIGITAL EUROPEAN CORDLESS TELECOMMUNICATIONS (DECT) - GENERAL TERMINAL ATTACHMENT REQUIREMENTS - TELEPHONY APPLICATIONS |
| ISO 18692:2007 | Fibre ropes for offshore stationkeeping Polyester |
| GOST ISO 161-1 : 2004 | THERMOPLASTICS PIPES FOR THE CONVEYANCE OF FLUIDS - NOMINAL OUTSIDE DIAMETERS AND NOMINAL PRESSURES - METRIC SERIES |
| BS EN 60384-15:2017 | Fixed capacitors for use in electronic equipment Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte |
| EN 60384-2:2012 | Fixed capacitors for use in electronic equipment - Part 2: Sectional specification - Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors |
| BS EN 60947-7-3:2009 | Low-voltage switchgear and controlgear Ancillary equipment. Safety requirements for fuse terminal blocks |
| CSA E60127.6 : 2003 | MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE CARTRIDGE FUSE-LINKS |
| 02/710901 DC : DRAFT SEP 2002 | BS EN ISO 7840 - SMALL CRAFT - FIRE-RESISTANT FUEL HOSES |
| BS ISO 4156-3:2005 | Straight cylindrical involute splines. Metric module, side fit Inspection |
| 04/30069821 DC : DRAFT AUG 2004 | ISO 3334 - MICROGRAPHICS - ISO RESOLUTION TEST CHART NO. 2 - DESCRIPTION AND USE |
| I.S. EN 60384-21:2012 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 (IEC 60384-21:2011 (EQV)) |
| CAN/CSA-E60127-6-03 (R2017) | Miniature Fuses - Part 6: Fuse-Holders for Miniature Cartridge Fuse-Links (Adopted CEI/IEC 127-6:1994, first edition, 1994-04, including Amendment 1:1996, with Canadian deviations) | Coupe-circuit miniatures - Partie 6: Ensembles-porteurs pour cartouches de coupe-circuit miniatures (norme CEI/IEC 127-6:1994 adoptée, première édition, 1994-04, y compris l\'Amendement 1:1996, avec exigences propres au Canada) |
| DIN EN ISO 13351:2011-11 | Fans - Dimensions (ISO 13351:2009) |
| ISO/TR 21477:2017 | Optics and photonics Preparation of drawings for optical elements and systems Surface imperfection specification and measurement systems |
| NF EN 60289 : 96 AMD 11 2002 | REACTORS |
| IEC 60317-0-10:2017 | Specifications for particular types of winding wires - Part 0-10: General requirements - Polyester glass-fibre wound fused, unvarnished, or resin or varnish impregnated, bare or enamelled round copper wire |
| CSA Z234.3 : 1989 | GUIDE FOR THE SELECTION AND USE OF PREFERRED NUMBERS |
| BS EN ISO 15494:2015 | Plastics piping systems for industrial applications. Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP). Metric series for specifications for components and the system |
| ISO 4065:2018 | Thermoplastics pipes — Universal wall thickness table |
| CEI EN 60384-26 : 2011 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE |
| BS EN 60317-0-3 : 2008 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-3: GENERAL REQUIREMENTS - ENAMELLED ROUND ALUMINIUM WIRE |
| UNE-ISO 4190-1:2011 | Lift (Elevator)installation- Part 1: Class I, II, III and VI lifts |
| CEI EN 60384-21 : 2013 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 |
| DIN EN 12261:2007-07 | GAS METERS - TURBINE GAS METERS |
| I.S. EN ISO 13590:2004 | SMALL CRAFT - PERSONAL WATERCRAFT - CONSTRUCTION AND SYSTEM INSTALLATION REQUIREMENTS |
| ONORM EN ISO 32100 : 2011 | RUBBER- OR PLASTICS-COATED FABRICS - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF FLEX RESISTANCE BY THE FLEXOMETER METHOD |
| ISO 8085-3:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels Metric series Specifications Part 3: Electrofusion fittings |
| UNE-EN ISO 8469:2014 | Small craft - Non-fire-resistant fuel hoses (ISO 8469:2013) |
| I.S. EN 60317-0-4:2016 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-4: GENERAL REQUIREMENTS - GLASS-FIBRE WOUND, RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED RECTANGULAR COPPER WIRE |
| I.S. EN 60077-5:2003 | RAILWAY APPLICATIONS - ELECTROTECHNICAL EQUIPMENT FOR ROLLING STOCK - PART 5: ELECTROTECHNICAL COMPONENTS - RULES FOR HV FUSES |
| I.S. EN 62674-1:2012 | HIGH FREQUENCY INDUCTIVE COMPONENTS - PART 1: FIXED SURFACE MOUNT INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT (IEC 62674-1:2012 (EQV)) |
| BS EN 60384-9:2015 | Fixed capacitors for use in electronic equipment Sectional specification: Fixed capacitors of ceramic dielectric, Class 2 |
| BS EN 60127-4 : 2005 | MINIATURE FUSES - PART 4: UNIVERSAL MODULAR FUSE-LINKS (UMF) - THROUGH-HOLE AND SURFACE MOUNT TYPES |
| I.S. EN 60384-2:2012 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYETHYLENE TEREPHTHALATE FILM DIELECTRIC D.C. CAPACITORS (IEC 60384-2:2011 (EQV)) |
| ISO 1174-1:2011 | Assembly tools for screws and nuts — Driving squares — Part 1: Driving squares for hand socket tools |
| I.S. EN ISO 11297-3:2013 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND DRAINAGE AND SEWERAGE NETWORKS UNDER PRESSURE - PART 3: LINING WITH CLOSE-FIT PIPES (ISO 11297-3:2013) |
| ISO 1609:1986 | Vacuum technology Flange dimensions |
| UNI EN ISO 32100 : 2011 | RUBBER- OR PLASTICS-COATED FABRICS - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF FLEX RESISTANCE BY THE FLEXOMETER METHOD |
| CEI EN 60317-0-2 : 2014 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-2: GENERAL REQUIREMENTS - ENAMELLED RECTANGULAR COPPER WIRE |
| ISO 10931-1:1997 | Plastics piping systems for industrial applications Poly(vinylidene fluoride) (PVDF) Part 1: General |
| ISO 4437-1:2014 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 1: General |
| I.S. 529:1991 | FIXED CERAMIC CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 (SECTIONAL SPECIFICATION) |
| I.S. 530:1991 | FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2 (SECTIONAL SPECIFICATION) |
| ISO 1027:1983 | Radiographic image quality indicators for non-destructive testing Principles and identification |
| TS 100 392-16 : 1.2.1 | TERRESTRIAL TRUNKED RADIO (TETRA); VOICE PLUS DATA (V+D); PART 16: NETWORK PERFORMANCE METRICS |
| I.S. EN 60384-22:2012 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2 (IEC 60384-22:2011 (EQV)) |
| CEI EN 60384-22 : 2013 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2 |
| UNE-EN ISO 11299-3:2014 | Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2011) |
| ETS 300 607-1 : 2015 | DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2) (GSM); MOBILE STATION (MS) CONFORMANCE SPECIFICATION; PART 1: CONFORMANCE SPECIFICATION |
| CLC/TS 60034-31:2011 | Rotating electrical machines - Part 31: Selection of energy-efficient motors including variable speed applications - Application guide |
| BS EN 60384-20:2015 | Fixed capacitors for use in electronic equipment Sectional specification. Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors |
| CEI EN 60384-4 : 2007 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) AND NON-SOLID ELECTROLYTE |
| ETS 300 176-2 : 20002 | DIGITAL ENHANCED CORDLESS TELECOMMUNICATIONS (DECT) - APPROVAL TEST SPECIFICATION - SPEECH |
| EN ISO 8469:2013 | Small craft - Non-fire-resistant fuel hoses (ISO 8469:2013) |
| I.S. EN 60317-0-9:2015 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-9: GENERAL REQUIREMENTS - ENAMELLED RECTANGULAR ALUMINIUM WIRE |
| EN 60384-25:2015 | Fixed capacitors for use in electronic equipment - Part 25: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte |
| DIN EN 12101-3:2015-12 | SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT CONTROL VENTILATORS (FANS) |
| DIN EN 14268:2005-11 | IRRIGATION TECHNIQUES - METERS FOR IRRIGATION WATER |
| IEC 60059:1999+AMD1:2009 CSV | IEC standard current ratings |
| UNE-EN 12101-3:2016 | Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans) |
| ISO 17885:2015 | Plastics piping systems Mechanical fittings for pressure piping systems Specifications |
| IEC 60317-0-1:2013 | Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire |
| ISO 2157:2016 | Dentistry Nominal diameters and designation code numbers for rotary instruments |
| BS EN ISO 12162:2009 | Thermoplastics materials for pipes and fittings for pressure applications. Classification, designation and design coefficient |
| I.S. EN ISO 1119:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES (ISO 1119:2011) |
| EN 60384-13:2012 | Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil d.c. capacitors |
| I.S. EN ISO 6224:2011 | THERMOPLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION (ISO 6224:2011) |
| DIN EN ISO 7840:2013-12 | SMALL CRAFT - FIRE-RESISTANT FUEL HOSES (ISO 7840:2013) |
| DIN EN 14409-3:2004-12 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES |
| DIN EN ISO 3821:2010-07 | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| I.S. EN 12101-3:2015 | SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT CONTROL VENTILATORS (FANS) |
| I.S. EN 12201-1:2011 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL |
| I.S. EN 1555-1:2010-2015 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL |
| DIN 616:2000-06 | Rolling bearings - General plan for boundary dimensions |
| I.S. EN 60317-0-5:2007 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-5: GENERAL REQUIREMENTS - GLASS-FIBRE BRAIDED RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED RECTANGULAR COPPER WIRE |
| I.S. EN ISO 2157:2016 | DENTISTRY - NOMINAL DIAMETERS AND DESIGNATION CODE NUMBERS FOR ROTARY INSTRUMENTS (ISO 2157:2016) |
| I.S. EN ISO 5172:2006 | GAS WELDING EQUIPMENT - BLOWPIPES FOR GAS WELDING, HEATING AND CUTTING - SPECIFICATIONS AND TESTS (ISO 5172:2006) |
| I.S. EN 12007-2:2012 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 2: SPECIFIC FUNCTIONAL REQUIREMENTS FOR POLYETHYLENE (MOP UP TO AND INCLUDING 10 BAR) |
| BS 6339(2005) : 2005 | GENERAL-PURPOSE INDUSTRIAL FANS - CIRCULAR FLANGES - DIMENSIONS |
| VDE 0532-20 : 1994 | REACTORS |
| BS CECC 30400:1984 | Harmonized system of quality assessment for electronic components. Sectional specification: fixed metallized polyethylene-terephthalate film dielectric capacitors for direct current |
| BS 3289:1982 | Specification for conveyor belting primarily for use underground (including fire performance) |
| DIN EN 60938-2 : 2008 | FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 2: SECTIONAL SPECIFICATION |
| BS CECC 30100:1986 | Harmonized system of quality assessment for electronic components. Sectional specification: fixed polyethylene terephthalate film dielectric metal foil capacitors for direct current |
| BS 2634-2:2010 | Roughness comparison specimens Specification for spark-eroded, shot-blasted, grit-blasted and polished specimens |
| BS CECC 30900:1986 | Harmonized system of quality assessment for electronic components. Sectional specification: fixed polystyrene film dielectric metal foil d.c. capacitors |
| I.S. EN ISO 12162:2009 | THERMOPLASTICS MATERIALS FOR PIPES AND FITTINGS FOR PRESSURE APPLICATIONS - CLASSIFICATION, DESIGNATION AND DESIGN COEFFICIENT (ISO 12162:2009) |
| ISO 9803-1:2007 | Vacuum technology Mounting dimensions of pipeline fittings Part 1: Non knife-edge flange type |
| TS 103 740 : 1.1.2 | SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); TRANSMISSION REQUIREMENTS FOR WIDEBAND WIRELESS TERMINALS (HANDSFREE) FROM A QOS PERSPECTIVE AS PERCEIVED BY THE USER |
| BS EN 60317-53:2014 | Specifications for particular types of winding wires Aromatic polyamide (aramid) tape wrapped rectangular copper wire, temperature index 220 |
| 17/30329963 DC : 0 | BS ISO 10110-18 - OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 18: MATERIAL IMPERFECTIONS - STRESS BIREFRINGENCE, BUBBLES AND INCLUSIONS, AND HOMOGENEITY AND STRIAE |
| 07/30144793 DC : 0 | BS ISO 96-2 - TEXTILE MACHINERY AND ACCESSORIES - RINGS AND TRAVELLERS FOR RING SPINNING AND RING TWISTING FRAMES - PART 2: HZ- AND J-RINGS AND THEIR TRAVELLERS |
| 01/123802 DC : DRAFT OCT 2001 | BS ISO 14531-2 - PLASTICS PIPES AND FITTINGS - CROSSLINKED POLYETHYLENE (PE-X) PIPE SYSTEMS FOR THE TRANSPORT OF GASEOUS FUELS - METRIC SERIES - SPECIFICATIONS - PART 2: FITTINGS FOR HEAT FUSION JOINTING |
| 10/30212144 DC : 0 | BS EN 12201-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL |
| NF ETS 300807 : 2001 | INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - AUDIO CHARACTERISTICS OF TERMINALS DESIGNED TO SUPPORT CONFERENCE SERVICES IN THE ISDN |
| BS ISO 8419:2003 | Belt drives. Narrow V-belts. Sections 9N/J, 15N/J and 25N/J (lengths in the effective system) |
| BS EN ISO 8029:2014 | Plastics hose. General-purpose collapsible water hose, textile-reinforced. Specification |
| DIN SPEC 19674-1:2011-02 | Plastics piping systems made from glass fibre reinforced polyethylene (PE-GF) for water supply and for drainage and sewerage under pressure - Part 1: General |
| 13/30212494 DC : 0 | BS EN ISO 15494 - PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE) AND POLYPROPYLENE (PP) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES |
| 05/30130524 DC : DRAFT MAR 2005 | ISO 22621-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING UP TO AND INCLUDING 2 MPA (20 BAR) - POLYAMIDE (PA) - PART 1: GENERAL |
| 13/30289538 DC : 0 | BS EN 60063 - PREFERRED NUMBER SERIES FOR RESISTORS AND CAPACITORS |
| 13/30284045 DC : 0 | BS EN 60384-23 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 23: SECTIONAL SPECIFICATION: FIXED SURFACE MOUNT METALLIZED POLYETHYLENE NAPHTHALATE FILM DIELECTRIC D.C. CAPACITORS |
| BS ISO 4437:2007 | Buried polyethylene (PE) pipes for the supply of gaseous fuels. Metric series. Specifications |
| CEI EN 62421 : 2008 | ELECTRONICS ASSEMBLY TECHNOLOGY - ELECTRONIC MODULES |
| XP I ETS 300245-6 : 99 XP | INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - TECHNICAL CHARACTERISTICS OF TELEPHONY TERMINALS - PART 6: WIDEBAND (7 KHZ), LOUDSPEAKING AND HANDS FREE TELEPHONY |
| NF EN 4199-004 : 2015 | AEROSPACE SERIES - BONDING STRAPS FOR AIRCRAFT - PART 004: ROUND BONDING STRAPS, COPPER, TIN PLATED -65 DEGREES C UP TO 150 DEGREES C AND NICKEL PLATED -65 DEGREES C UP TO 260 DEGREES C - PRODUCT STANDARD |
| 10/30216216 DC : 0 | BS EN 60384-13:2006/A1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 13: SECTIONAL SPECIFICATION - FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS |
| 14/30312344 DC : 0 | PD IEC/PAS 60127-8 - MINIATURE FUSES - PART 8: FUSE RESISTORS WITH PARTICULAR OVERCURRENT PROTECTION |
| 02/706400 DC : DRAFT MAY 2002 | BS ISO 4156-1 - STRAIGHT CYLINDRICAL INVOLUTE SPLINES - METRIC MODULE, SIDE FIT - PART 1: GENERALITIES |
| NF EN ISO 21003-1 : 2008 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL |
| 97/231700 DC : DRAFT DEC 1997 | IEC 60115-1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| 11/30244915 DC : 0 | BS EN ISO 8029 - PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION |
| BS EN ISO 8469:2013 | Small craft. Non-fire-resistant fuel hoses |
| NF EN 60059 : 1999 AMD 1 2009 | |
| 14/30311246 DC : 0 | BS EN 60127-5 - MINIATURE FUSES - PART 5: GUIDELINES FOR QUALITY ASSESSMENT OF MINIATURE FUSE-LINKS |
| BS EN 140000:1995 | Harmonized system of quality assessment for electronic components. Generic specification: fixed resistors |
| 12/30261056 DC : DRAFT MAR 2012 | BS EN 60269-6:2011+A1 - LOW-VOLTAGE FUSES - PART 6: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SOLAR PHOTOVOLTAIC ENERGY SYSTEMS |
| ISO 3334:2006 | Micrographics ISO resolution test chart No. 2 Description and use |
| 13/30289547 DC : 0 | BS EN 60384-18 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH SOLID (MNO2) AND NON-SOLID ELECTROLYTE |
| ISO 15:2017 | Rolling bearings — Radial bearings — Boundary dimensions, general plan |
| 96/204185 DC : DRAFT APR 1996 | PREN 131900 - SECTIONAL SPECIFICATION - FIXED CAPACITORS WITH METALLIZED ELECTRODES AND POLYPROPYLENE FILM DIELECTRIC FOR A.C. AND PULSE |
| TS 102 925 : 1.1.1 | SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); TRANSMISSION REQUIREMENTS FOR SUPERWIDEBAND/FULLBAND HANDSFREE AND CONFERENCING TERMINALS FROM A QOS PERSPECTIVE AS PERCEIVED BY THE USER |
| ES 201 377-2 : 1.4.1 | SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); SPECIFICATION AND MEASUREMENT OF SPEECH TRANSMISSION QUALITY; PART 2: MOUTH-TO-EAR SPEECH TRANSMISSION QUALITY INCLUDING TERMINALS |
| BS EN 131800:1998 | Harmonized system of quality assessment for electronic components. Sectional specification: fixed polypropylene film dielectric metal foil d.c. capacitors |
| BS EN 60852-4:1997 | Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment Transformers and inductors using YUI-2 laminations |
| BS EN 138100:1997 | Harmonized system of quality assessment for electronic components. Sectional specification: fixed inductors for electromagnetic interference suppression (inductors for which safety tests are required) |
| 12/30258383 DC : 0 | BS EN ISO 11297-3 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND DRAINAGE AND SEWERAGE NETWORKS UNDER PRESSURE - PART 3: LINING WITH CLOSE-FIT PIPES |
| BS EN 4199-004:2014 | Aerospace series. Bonding straps for aircraft Round bonding straps, copper, tin plated -65°C up to 150°C and nickel plated -65°C up to 260°C. Product Standard |
| 08/30185535 DC : DRAFT JULY 2008 | BS EN ISO 1452-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC U) - PART 1: GENERAL |
| 11/30215951 DC : 0 | BS ISO 17089-2 - MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - ULTRASONIC METERS FOR GAS - PART 2: METERS FOR INDUSTRIAL APPLICATIONS |
| BS EN 130300:1998 | Harmonized system of quality assessment for electronic components. Sectional specification:aluminium electrolytic capacitors with solid and non-solid electrolyte |
| 04/30113172 DC : DRAFT MAY 2004 | IEC 60384-24 ED.1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 24: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE |
| ISO 22:1991 | Belt drives Flat transmission belts and corresponding pulleys Dimensions and tolerances |
| BS EN 60127-5:2017 | Miniature fuses Guidelines for quality assessment of miniature fuse-links |
| CEI EN 60317-0-5 : 2007 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-5: GENERAL REQUIREMENTS - GLASS-FIBRE BRAIDED RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED RECTANGULAR COPPER WIRE |
| BS EN ISO 21003-1:2008 | Multilayer piping systems for hot and cold water installations inside buildings General |
| BS EN 61007:1997 | Transformers and inductors for use in electronic and telecommunication equipment. Measuring methods and test procedures |
| CEI EN 60384-15 : 1ED 2017 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 15: SECTIONAL SPECIFICATION: FIXED TANTALUM CAPACITORS WITH NON-SOLID OR SOLID ELECTROLYTE |
| BS 2782-7 Method 730B:1978 | Methods of testing plastics. Rheological properties Determination of the viscosity of polymers in the liquid, emulsified or dispersed state using a rotational viscometer working at a defined shear rate |
| CEI EN 60384-3 : 2007 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) ELECTROLYTE |
| BS 2782-11.1121A(1996) : 1996 | METHODS OF TESTING PLASTICS - THERMOPLASTICS PIPES, FITTINGS AND VALVES, THERMOPLASTICS MATERIALS FOR PIPES AND FITTINGS FOR PRESSURE APPLICATIONS - CLASSIFICATION AND DESIGN OVERALL SERVICE (DESIGN) COEFFICIENT |
| BS EN 60077-5:2003 | Railway applications. Electrotechnical equipment for rolling stock Electrotechnical components. Rules for HV fuses |
| 14/30301133 DC : 0 | BS EN 60127-7:2014 - MINIATURE FUSES - PART 7: MINIATURE FUSE-LINKS FOR SPECIAL APPLICATIONS |
| BS EN 60076-1:2011 | Power transformers General |
| 12/30256736 DC : 0 | BS ISO 4437-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL |
| 17/30355844 DC : DRAFT JUL 2017 | BS EN 60384-21 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 |
| 93/200044 DC : 0 | PREN 132600 - SECTIONAL SPECIFICATION - SURFACE MOUNTED MICA CAPACITORS - QUALIFICATION APPROVAL |
| BS EN 60127-7:2016 | Miniature fuses Miniature fuse-links for special applications |
| BS 171-1:1978 | Power transformers General |
| I.S. EN 60034-30-1:2014 | ROTATING ELECTRICAL MACHINES - PART 30-1: EFFICIENCY CLASSES OF LINE OPERATED AC MOTORS (IE CODE) |
| 09/30214329 DC : 0 | BS EN 60384-21 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21: SECTIONAL SPECIFICATION: FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 |
| 01/713262 DC : DRAFT SEP 2001 | PREN 14268 - IRRIGATION TECHNIQUES - METRES FOR IRRIGATION WATER |
| BS 6811-3.0(1993) : 1993 AMD 8984 | WINDING WIRES - SPECIFICATIONS FOR PARTICULAR TYPES OF ROUND COPPER WINDING WIRES - GENERAL REQUIREMENTS |
| 16/30316478 DC : DRAFT APR 2016 | BS ISO 10110-7 - OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 7: SURFACE IMPERFECTION |
| BS ISO 6224 : 1995 AMD 9706 | PLASTIC HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
| UNI EN ISO 3821 : 2010 | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| 04/30107711 DC : DRAFT JAN 2004 | ISO/DIS 14531-3 - PLASTIC PIPES AND FITTINGS - CROSSLINKED POLYETHYLENE (PE-X) PIPE SYSTEMS FOR THE CONVEYANCE OF GASEOUS FUELS - METRIC SERIES - SPECIFICATIONS - PART 3: FITTINGS FOR MECHANICAL JOINTING (INCLUDING PE-X/METAL TRANSITIONS) |
| 04/30113200 DC : DRAFT MAY 2004 | IEC 60384-25 ED.1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 25: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE |
| 08/30191143 DC : 0 | BS EN 1555-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL |
| 06/30146370 DC : DRAFT SEP 2006 | ISO 15439-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 4 BAR - POLYAMIDE (PA) - PART 1: GENERAL |
| BS EN 62391-2:2006 | Fixed electric double-layer capacitors for use in electronic equipment Sectional specification. Electric double-layer capacitors for power application |
| 13/30280854 DC : 0 | BS EN 60384-8 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 |
| BS ISO 1174-1:2011 | Assembly tools for screws and nuts. Driving squares Driving squares for hand socket tools |
| BS EN 60034-30-1:2014 | Rotating electrical machines Efficiency classes of line operated AC motors (IE code) |
| ES 203 038 : 1.2.1 | SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); REQUIREMENTS AND TESTS METHODS FOR TERMINAL EQUIPMENT INCORPORATING A HANDSET WHEN CONNECTED TO THE ANALOGUE INTERFACE OF THE PSTN |
| BS EN 60384-6:2005 | Fixed capacitors for use in electronic equipment Sectional specification. Fixed metallized polycarbonate film dielectric d.c. capacitors |
| VDE 0713-6 : 1994 COR 1 1995 | TRANSFORMERS FOR TUBULAR DISCHARGE LAMPS HAVING A NO-LOAD OUTPUT VOLTAGE EXCEEDING 1000 V (GENERALLY CALLED NEON-TRANSFORMERS) - GENERAL AND SAFETY REQUIREMENTS |
| BS ISO 5290:2001 | Belt drives. Grooved pulleys for narrow V-belts. Groove sections 9N/J, 15N/J and 25N/J (effective system) |
| BS EN 60384-25:2015 | Fixed capacitors for use in electronic equipment Sectional specification. Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte |
| PD IEC/TS 60034-30-2:2016 | Rotating electrical machines Efficiency classes of variable speed AC motors (IE-code) |
| 16/30338234 DC : 0 | BS EN 60127-8 - MINIATURE FUSES - PART 8: FUSE RESISTORS WITH PARTICULAR OVERCURRENT PROTECTION |
| BS EN 130800:2001 | Harmonized system of quality assessment for electronic components. Sectional specification. Tantalum surface mounting capacitors |
| IEC 60317-0-7:2017 | Specifications for particular types of winding wires - Part 0-7: General requirements - Fully insulated (FIW) zero-defect enamelled round copper wire |
| BS EN 133200:1999 | Harmonized system of quality assessment for electronic components. Sectional specification:passive filter units for electromagnetic interference suppression (filters for which safety tests are required) |
| DIN EN ISO 8029:2014-12 | PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION (ISO 8029:2014) |
| BS ISO 14531-1:2002 | Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications Pipes |
| BS ISO 9803-1:2007 | Vacuum technology. Mounting dimensions of pipeline fittings Non knife-edge flange type |
| BS 6811-5.0(1993) : AMD 8987 | WINDING WIRES - SPECIFICATIONS FOR PARTICULAR TYPES OF ENAMELLED ROUND ALUMINIUM WINDING WIRES - GENERAL REQUIREMENTS |
| BS EN 130500:1998 | Harmonized system of quality assessment for electronic components. Sectional specification: fixed metallized polycarbonate film dielectric capacitors for direct current |
| BS ISO 4437-1:2014 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) General |
| CSA E60127.6 : 2003 : R2012 | MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE CARTRIDGE FUSE-LINKS |
| 96/201315 DC : DRAFT JAN 1996 | EN 160300 - PROPOSAL FOR A SECTIONAL SPECIFICATION FOR POWER CONVERSION UNITS OF ASSESSED QUALITY FOR CAPABILITY APPROVAL AS MODULAR ELECTRONIC UNITS |
| IEC 61261-2:1994 | Piezoelectric ceramic filters for use in electronic equipment - A specification in the IEC quality assessment system for electronic components (IECQ) - Part 2: Sectional specification - Qualification approval |
| PREN 17176-2 : DRAFT 2017 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE GROUND DRAINAGE, SEWERAGE AND IRRIGATION UNDER PRESSURE - ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) - PART 2: PIPES |
| UNI ISO 1174-1 : 2012 | ASSEMBLY TOOLS FOR SCREWS AND NUTS - DRIVING SQUARES - PART 1: DRIVING SQUARES FOR HAND SOCKET TOOLS |
| DIN EN 61050 : 1994 COR 1 1995 | TRANSFORMERS FOR TUBULAR DISCHARGE LAMPS HAVING A NO-LOAD OUTPUT VOLTAGE EXCEEDING 1000 V (GENERALLY CALLED NEON-TRANSFORMERS) - GENERAL AND SAFETY REQUIREMENTS |
| IEC TS 62886:2016 | Electroacoustics - Hearing aids - Method for measuring electroacoustic performance up to 16 kHz |
| DIN EN ISO 1452-1:2010-04 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General (ISO 1452-1:2009) |
| I.S. EN ISO 15494:2015 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT), CROSSLINKED POLYETHYLENE (PE-X), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 15494:2015) |
| ISO 8584-1:1990 | Thermoplastics pipes for industrial applications under pressure Determination of the chemical resistance factor and of the basic stress Part 1: Polyolefin pipes |
| ISO 3320:2013 | Fluid power systems and components — Cylinder bores and piston rod diameters and area ratios — Metric series |
| ISO 15494:2015 | Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system |
| BS EN 60289:1995 | Reactors |
| DIN ISO 3302-1:2016-10 (Draft) | RUBBER - TOLERANCES FOR PRODUCTS - PART 1: DIMENSIONAL TOLERANCES |
| IEC 60740-2:1993 | Laminations for transformers and inductors for use in telecommunication and electronic equipment - Part 2: Specification for the minimum permeabilities of laminations made of soft magnetic metallic materials |
| I.S. EN 60938-2:1999 | FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 2: SECTIONAL SPECIFICATION |
| NF EN 60269-1 : 2007 AMD 2 2014 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS |
| ISO 3669:2017 | Vacuum technology Bakeable flanges Dimensions of knife-edge flanges |
| I.S. EN 60384-6:2005 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 6: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYCARBONATE FILM DIELECTRIC D.C. CAPACITORS |
| IEEE/ANSI C63.19-2011 REDLINE | American National Standard Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing Aids |
| BS EN 60384-2:2012 | Fixed capacitors for use in electronic equipment Sectional specification. Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors |
| ISO 6301-2:2006 | Pneumatic fluid power Compressed-air lubricators Part 2: Test methods to determine the main characteristics to be included in supplier's literature |
| BS EN 60384-24:2015 | Fixed capacitors for use in electronic equipment Sectional specification. Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte |
| I.S. EN 60384-24:2015 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 24: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE |
| CEI 303-13 : 2000 | TELEPHONE TERMINALS, SPECIAL TELEPHONE TERMINALS AND RELATED AUXILIARY DEVICES |
| BS EN 60269-4 : 2009 | LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES (IEC 60269-4:2009) |
| I.S. EN 60384-1:2016 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| ISO 4156-3:2005 | Straight cylindrical involute splines Metric module, side fit Part 3: Inspection |
| I.S. EN 60317-44:1998 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - AROMATIC POLYIMIDE TAPE WRAPPED RECTANGULAR COPPER WIRE, CLASS 240 |
| I.S. EN 60317-0-6:2001 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-6: GENERAL REQUIREMENTS - GLASS-FIBRE WOUND RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED ROUND COPPER WIRE |
| IEC TR 62271-306:2012 | High-voltage switchgear and controlgear - Part 306: Guide to IEC 62271-100, IEC 62271-1 and other IEC standards related to alternating current circuit-breakers |
| EN ISO 11297-3:2013 | Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2013) |
| NF EN 60127-6 : 2014 | MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE CARTRIDGE FUSE-LINKS |
| CEI EN 60317-0-10 : 1ED 2017 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-10: GENERAL REQUIREMENTS - POLYESTER GLASS-FIBRE WOUND FUSED, UNVARNISHED, OR RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED ROUND COPPER WIRE |
| I.S. EN 130900:1998 | FIXED POLYSTYRENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS (SECTIONAL SPECIFICATION) |
| BS ISO 6301-2:1997 | Pneumatic fluid power. Compressed air lubricators Test methods to determine the main characteristics to be included in supplier\'s literature |
| UNI EN ISO 8029 : 2014 | PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION |
| UNI EN ISO 8596 : 2009 | OPHTHALMIC OPTICS - VISUAL ACUITY TESTING - STANDARD OPTOTYPE AND ITS PRESENTATION |
| ISO/IEC TR 14252:1996 | Information technology — Guide to the POSIX Open System Environment (OSE) |
| EG 201 377-2 : 1.3.1 | SPEECH PROCESSING, TRANSMISSION AND QUALITY ASPECTS (STQ); SPECIFICATION AND MEASUREMENT OF SPEECH TRANSMISSION QUALITY; PART 2: MOUTH-TO-EAR SPEECH TRANSMISSION QUALITY INCLUDING TERMINALS |
| ISO 6993-3:2006 | Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa) |
| IEC 61558-1:2017 | Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests |
| IEC 61253-2:1993 | Piezoelectric ceramic resonators - A Specification in the IEC quality assessment system for electronic components (IECQ) - Part 2: Sectional specification - Qualification approval |
| IEC TS 60034-31:2010 | Rotating electrical machines - Part 31: Selection of energy-efficient motors including variable speed applications - Application guide |
| I.S. EN 131700:1998 | FIXED CAPACITORS FOR DIRECT CURRENT WITH ELECTRODES OF THIN METAL FOILS AND A POLYCARBONATE FILM DIELECTRIC (SECTIONAL SPECIFICATION) |
| ISO 8469:2013 | Small craft Non-fire-resistant fuel hoses |
| I.S. EN 131200:2002 | SECTIONAL SPECIFICATION: FIXED CAPACITORS WITH METALLIZED ELECTRODES AND POLYPROPYLENE DIELECTRIC |
| IEC 60384-15:2017 | Fixed capacitors for use in electronic equipment - Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte |
| ISO 5782-2:1997 | Pneumatic fluid power Compressed-air filters Part 2: Test methods to determine the main characteristics to be included in supplier's literature |
| IEC TS 60318-7:2017 | Electroacoustics - Simulators of human head and ear - Part 7: Head and torso simulator for the measurement of air-conduction hearing aids |
| EN 140200 : 1996 AMD 1 2001 | FIXED POWER RESISTORS (SECTIONAL SPECIFICATION) |
| OVE/ONORM EN 60127-3 : 2015 | MINIATURE FUSES - PART 3: SUB-MINIATURE FUSE-LINKS (IEC 60127-3:2015) |
| DIN EN 1555-1:2010-12 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General |
| EN 130800 : 2000 AMD 1 2003 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS ASSESSMENT FOR ELECTRONIC COMPONENTS - SECTIONAL SPECIFICATION: TANTALUM SURFACE MOUNTING CAPACITORS |
| DIN EN ISO 12162:2010-04 | Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009) |
| BS EN 14409-3:2004 | Plastics piping systems for renovation of underground water supply networks Lining with close fit pipes |
| BS EN 12201-1:2011 | Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) General |
| IEC 60127-4:2005+AMD1:2008+AMD2:2012 CSV | Miniature fuses - Part 4: Universal modular fuse-links (UMF) -Through-hole and surface mount types |
| ISO 21003-1:2008 | Multilayer piping systems for hot and cold water installations inside buildings — Part 1: General |
| IEC 60384-24:2015 | Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte |
| IEC 62391-2:2006 | Fixed electric double-layer capacitors for use in electronic equipment - Part 2: Sectional specfication - Electric double layer capacitors for power application |
| BS EN 14154-2 : 2005 | WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE |
| BS EN 12007-2:2012 | Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar Specific functional requirements for polyethylene (MOP up to and including 10 bar) |
| IEC 60317-0-9:2015 | Specifications for particular types of winding wires - Part 0-9: General requirements - Enamelled rectangular aluminium wire |
| IEC 60269-4:2009+AMD1:2012+AMD2:2016 CSV | Low-voltage fuses - Part 4: Supplementary requirements forfuse-links for the protection of semiconductor devices |
| UNE-EN 12007-2:2013 | Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional requirements for polyethylene (MOP up to and including 10 bar) |
| EN 60317-0-2:2014 | Specifications for particular types of winding wires - Part 0-2: General requirements - Enamelled rectangular copper wire |
| UNE-EN 14154-1:2005 | Water meters - Part 1: General requirements |
| EN 60317-0-6:2001/A1:2006 | SPECIFICATION FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-6: GENERAL REQUIREMENTS - GLASS-FIBRE WOUND RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED ROUND COPPER WIRE |
| UNE-EN 14154-2:2005 | Water meters - Part 2 : Installation and conditions of use |
| EN 60127-3:2015 | Miniature fuses - Part 3: Sub-miniature fuse-links |
| OVE/ONORM EN 60384-16 : 2006 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 16: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC D.C. CAPACITORS |
| UL 60947-7-3:3ED 2017-01-27 | Low-Voltage Switchgear and Controlgear - Part 7-3: Ancillary Equipment - Safety Requirements for Fuse Terminal Blocks |
| EN 131700:1997 | Sectional Specification: Fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric |
| UNI EN ISO 1119 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPERS ANGLES |
| UNI EN 14268 : 2006 | IRRIGATION TECHNIQUES - METERS FOR IRRIGATION WATER |
| UNI EN 12007-2 : 2012 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 2: SPECIFIC FUNCTIONAL REQUIREMENTS FOR POLYETHYLENE (MOP UP TO AND INCLUDING 10 BAR) |
| OVE/ONORM EN 60384-13 : 2012 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 13: SECTIONAL SPECIFICATION - FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS (IEC 60384-13:2011) |
| UNI EN 12201-1 : 2012 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL |
| UNI EN ISO 12162 : 2010 | THERMOPLASTICS MATERIALS FOR PIPES AND FITTINGS FOR PRESSURE APPLICATIONS - CLASSIFICATION, DESIGNATION AND DESIGN COEFFICIENT |
| UNI EN ISO 6224 : 2011 | THERMOPLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
| UNI EN 14154-2 : 2011 | WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE |
| UNI EN 14154-1 : 2011 | WATER METERS - PART 1: GENERAL REQUIREMENTS |
| EN 130900 : 1997 | FIXED POLYSTYRENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS (SECTIONAL SPECIFICATION) |
| ISO 8085-2:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels Metric series Specifications Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings |
| DIN EN ISO 21003-1:2008-11 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL |
| DIN EN 138100 : 1997 | SECTIONAL SPECIFICATION - FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED) |
| BS ISO 4190-1:2010 | Lift (Elevator) installation Class I, II, III and VI lifts |
| ISO/TS 3669-2:2007 | Vacuum technology Bakable flanges Part 2: Dimensions of knife-edge flanges |
| BS ISO 8085-2:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications Spigot fittings for butt fusion, for socket fusion using heated tools and for use with eletrofusion fittings |
| 12/30260687 DC : 0 | BS EN 60384-20 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 20: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYPHENYLENE SULFIDE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS |
| BS ISO 161-1:2018 | Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures Metric series |
| 13/30284041 DC : 0 | BS EN 60384-19 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 19: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS |
| 05/30128222 DC : DRAFT JAN 2005 | ISO DIS 5774 - PLASTIC HOSES, TEXTILE REINFORCED, FOR COMPRESSED AIR - SPECIFICATION |
| BS EN 60384-26:2010 | Fixed capacitors for use in electronic equipment Sectional specification. Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte |
| 10/30216212 DC : 0 | BS EN 60384-2:2005/A1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYETHYLENE- TEREPHTHALATE FILM DIELECTRIC D.C. CAPACITORS |
| I.S. EN 131800:1998 | FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS (SECTIONAL SPECIFICATION) |
| BS 848-4(1997) : 1997 | FANS FOR GENERAL PURPOSES - PART 4: DIMENSIONS |
| DIN ISO 96-2:2010-07 | Textile machinery and accessories - Rings and travellers for ring spinning and ring twisting frames - Part 2: HZ- and J-rings and their travellers (ISO 96-2:2009) |
| ISO 1174-2:1996 | Assembly tools for screws and nuts Driving squares Part 2: Driving squares for power socket tools |
| 11/30248330 DC : 0 | BS ISO 17467-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS JOINTED BY SOLVENT CEMENT - PART 1: GENERAL |
| IEC 60077-5:2003 | Railway applications - Electric equipment for rolling stock - Part 5: Electrotechnical components - Rules for HV fuses |
| BS EN 60034-30:2009 | Rotating electrical machines Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code) |
| CEI EN 60034-30-1 : 2015 | ROTATING ELECTRICAL MACHINES - PART 30-1: EFFICIENCY CLASSES OF LINE OPERATED AC MOTORS (IE CODE) |
| BS ISO 17467-1:2012 | Plastics piping systems for the supply of gaseous fuels. Unplasticized polyamide (PA-U) piping systems jointed by solvent cement General |
| 11/30211183 DC : 0 | BS ISO 16422 - PIPES AND JOINTS MADE OF ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) FOR THE CONVEYANCE OF WATER UNDER PRESSURE - SPECIFICATIONS |
| CEI EN 60384-9 : 2016 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 9: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2 |
| I.S. EN ISO 1452-1:2009 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL |
| 16/30354166 DC : 0 | BS ISO 161-1 - THERMOPLASTICS PIPES FOR THE CONVEYANCE OF FLUIDS - NOMINAL OUTSIDE DIAMETERS AND NOMINAL PRESSURES - PART 1: METRIC SERIES |
| I.S. EN 143000:1994 | THERMISTORS (GENERIC SPECIFICATION) |
| PREN ISO 15494 : DRAFT 2013 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE) AND POLYPROPYLENE (PP) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES (ISO/DIS 15494:2013) |
| 03/101948 DC : DRAFT FEB 2003 | IEC 60939-2 ED.2.0 - PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 2: SECTIONAL SPECIFICATION - TEST METHODS AND GENERAL REQUIREMENTS |
| UNI EN ISO 8469 : 2013 | SMALL CRAFT - NON-FIRE-RESISTANT FUEL HOSES |
| PD ISO/TR 4191:2014 | Plastics piping systems for water supply. Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O). Guidance for installation |
| ISO 18225:2012 | Plastics piping systems — Multilayer piping systems for outdoor gas installations — Specifications for systems |
| CEI EN 138100 : 1996 | SECTIONAL SPECIFICATION: FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED) |
| DIN IEC 60747-1:1987-03 | SEMICONDUCTOR DEVICES; DISCRETE DEVICES AND INTEGRATED CIRCUITS; GENERAL |
| 12/30260691 DC : 0 | BS EN 60384-24 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 24: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE |
| BS ISO 19899:2010 | Plastics piping systems. Polyolefin pipes and mechanical fitting assemblies. Test method for the resistance to end load (AREL test) |
| 14/30296564 DC : 0 | BS EN 60317-0-4 - SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-4: GENERAL REQUIREMENTS - GLASS-FIBRE WOUND RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED RECTANGULAR COPPER WIRE |
| 10/30208795 DC : 0 | BS EN 12007-2 - GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 2: SPECIFIC FUNCTIONAL RECOMMENDATIONS FOR POLYETHYLENE (MOP UP TO AND INCLUDING 10 BAR) |
| 14/30280850 DC : 0 | BS EN 60384-1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| NF EN 60947-7-3 : 2010 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-3: ANCILLARY EQUIPMENT - SAFETY REQUIREMENTS FOR FUSE TERMINAL BLOCKS |
| BS MA 102:1986 | Specification for fire resistant fuel hoses for small craft |
| BS EN ISO 4064-1:2017 | Water meters for cold potable water and hot water Metrological and technical requirements |
| 10/30215691 DC : DRAFT NOV 2010 | BS ISO 8535-1 - DIESEL ENGINES - STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES - PART 1: REQUIREMENTS FOR SEAMLESS COLD-DRAWN SINGLE-WALL TUBES |
| CEI EN 60317-0-1 : 2014 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-1: GENERAL REQUIREMENTS - ENAMELLED ROUND COPPER WIRE |
| PREN 12007-2 : DRAFT 2010 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 2: SPECIFIC FUNCTIONAL RECOMMENDATIONS FOR POLYETHYLENE (MOP UP TO AND INCLUDING 10 BAR) |
| 12/30264202 DC : 0 | BS EN ISO 11299-3 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES |
| BS ISO 3302-1:2014 | Rubber. Tolerances for products Dimensional tolerances |
| 12/30276805 DC : 0 | BS EN 60317-53 ED 2.0 - SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 53: AROMATIC POLYAMIDE (ARAMID) TAPE WRAPPED RECTANGULAR COPPER WIRE, TEMPERATURE INDEX 220 |
| 12/30259014 DC : 0 | BS EN 60127-6 - MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE FUSE-LINKS |
| CEI EN 60317-0-8 : 2013 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-8: GENERAL REQUIREMENTS - POLYESTER GLASS-FIBRE WOUND, RESIN OR VARNISH IMPREGNATED OR NOT IMPREGNATED, BARE OR ENAMELLED RECTANGULAR COPPER WIRE |
| 02/205635 DC : 0 | IEC 60384-23. ED.1.0 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 23: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYETHYLENE NAPHTHALATE FILM DIELECTRIC CHIP D.C. CAPACITORS |
| CEI EN 60034-30 : 2011 | ROTATING ELECTRICAL MACHINES - PART 30: EFFICIENCY CLASSES OF SINGLE-SPEED, THREE-PHASE, CAGE-INDUCTION MOTORS (IE CODE) |
| CEI EN 60384-18 : 2007 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH SOLID (MNO[2]) AND NON-SOLID ELECTROLYTE |
| PD CEN/TR 13259:2013 | Gas welding equipment. Industrial manual and machine blowpipes for flame heating, flame brazing and allied processes |
| DD CLC/TS 60034-31:2011 | Rotating electrical machines Selection of energy-efficient motors including variable speed applications. Application guide |
| BS EN 131700:1998 | Harmonized system of quality assessment for electronic components. Sectional specification: Fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric |
| BS ISO 3320:2013 | Fluid power systems and components. Cylinder bores and piston rod diameters and area ratios. Metric series |
| UNI EN ISO 1452-1 : 2010 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL |
| 05/30132515 DC : DRAFT APR 2005 | ISO 21358 - VACUUM TECHNOLOGY - RIGHT-ANGLE VALVE - DIMENSIONS AND INTERFACES FOR PNEUMATIC ACTUATOR |
| BS 6811-8.1(1993) : 1993 AMD 8989 | WINDING WIRE - SPECIFICATIONS FOR PARTICULAR TYPES OF RECTANGULAR COPPER WINDING WIRES - PAPER COVERED RECTANGULAR COPPER WIRE |
| ISO/TS 21432:2005 | Non-destructive testing Standard test method for determining residual stresses by neutron diffraction |
| I.S. EN ISO 8469:2013 | SMALL CRAFT - NON-FIRE-RESISTANT FUEL HOSES (ISO 8469:2013) |
| 98/230449 DC : DRAFT FEB 1998 | PREN 133200 - SECTIONAL SPECIFICATION - PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (FILTERS FOR WHICH SAFETY TESTS ARE REQUIRED) |
| 04/30109383 DC : DRAFT MAY 2004 | ISO 8535-1 - COMPRESSION-IGNITION ENGINES - STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES - PART 1: REQUIREMENTS FOR SEAMLESS COLD-DRAWN SINGLE-WALL TUBES |
| S.R. CEN/TR 13259:2013 | GAS WELDING EQUIPMENT - INDUSTRIAL MANUAL AND MACHINE BLOWPIPES FOR FLAME HEATING, FLAME BRAZING AND ALLIED PROCESSES |
| I.S. EN 60317-53:2014 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 53: AROMATIC POLYAMIDE (ARAMID) TAPE WRAPPED RECTANGULAR COPPER WIRE, TEMPERATURE INDEX 220 |
| 08/30176410 DC : DRAFT JULY 2008 | BS EN 60317-0-7 - SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-7: GENERAL REQUIREMENTS - FULLY INSULATED (FIW) ZERO-DEFECT ENAMELLED WINDING WIRES |
| 11/30257662 DC : 0 | BS EN 60317-0-2 - SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-2: GENERAL REQUIREMENTS - ENAMELLED RECTANGULAR COPPER WIRE |
| 12/30260721 DC : 0 | BS EN 60384-25 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 25: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE |
| BS EN 60384-13:2012 | Fixed capacitors for use in electronic equipment Sectional specification/ Fixed polypropylene film dielectric metal foil d.c. capacitors |
| ISO 16486-1:2012 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 1: General |
| DIN ISO 4782:1993-10 | METAL WIRE FOR INDUSTRIAL WIRE SCREENS AND WOVEN WIRE CLOTH |
| BS ISO 104:2015 | Rolling bearings. Thrust bearings. Boundary dimensions, general plan |
| BS 2782-11:Method 1121B:1997 | Methods of testing plastics. Thermoplastics pipes, fittings and valves Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures. Metric series |
| BS EN 130000:1994 | Harmonized system of quality assessment for electronic components. Generic specification: fixed capacitors |
| TBR 008 : 20002 | INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - TELEPHONY 3,1 kHz TELESERVICE - ATTACHMENT REQUIREMENTS FOR HANDSET TERMINALS |
| 04/30111593 DC : DRAFT MAR 2004 | IEC 60384-2 ED.3 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATIONS - FIXED METALLIZED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC D.C. CAPACITORS |
| BS CECC 31200:1981 | Harmonized system of quality assessment for electronic components: sectional specification: fixed capacitors with metallized electrodes and polypropylene dielectric |
| 13/30278121 DC : 0 | BS ISO 3302-1 - RUBBER - TOLERANCES FOR PRODUCTS - PART 1: DIMENSIONAL TOLERANCES |
| BS ISO 96-2:2009 | Textile machinery and accessories. Rings and travellers for ring spinning and ring twisting frames HZ- and J-rings and their travellers |
| 04/30031075 DC : DRAFT FEB 2004 | ISO 4064-1 - MEASUREMENT OF WATER FLOW IN CLOSED FULLY CHARGED CONDUITS - METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: SPECIFICATIONS |
| BS EN 60063:2015 | Preferred number series for resistors and capacitors |
| BS EN 60384-18:2016 | Fixed capacitors for use in electronic equipment Sectional specification. Fixed aluminium electrolytic surface mount capacitors with solid (MnO<sub>2</sub>) and non-solid electrolyte |
| NF EN ISO 13351 : 2010 | FANS - DIMENSIONS |
| I-ETS 300 245-6 : JAN 96 | INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - TECHNICAL CHARACTERISTICS OF TELEPHONY TERMINALS - WIDEBAND (7KHZ), LOUDSPEAKING AND HANDS FREE TELEPHONY |
| NF EN 60938-2 : 2008 AMD 1 2008 | FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 2: SECTIONAL SPECIFICATION |
| BS 6828-2:1987 | Dental rotary instruments Specification for nominal sizes and designations |
| BS EN 130100:1998 | Harmonized system of quality assessment for electronic components. Sectional specification: fixed polyethylene-terephthalate film dielectric metal foil capacitors for direct current |
| BS 6811-4.1(1991) : 1991 | WINDING WIRES - SPECIFICATIONS FOR PARTICULAR TYPES OF RECTANGULAR WINDING WIRES - GENERAL REQUIREMENTS |
| BS ISO 15:2017 | Rolling bearings. Radial bearings. Boundary dimensions, general plan |
| IEEE 269-2010 REDLINE | IEEE Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and Headsets |
| BS ISO 446:2004 | Micrographics. ISO character and ISO test chart No 1. Description and use |
| BS EN 60269-1 : 2007 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS |
| TR 2678 : 1 | AEROSPACE SERIES - DESIGN AND CONSTRUCTION OF PIPELINES FOR FLUIDS IN LIQUID OR GASEOUS CONDITION - DESIGN OF RIGID LINES |
| I.S. EN 61797-1:1998 | TRANSFORMERS AND INDUCTORS FOR USE IN TELECOMMUNICATION AND ELECTRONIC EQUIPMENT - MAIN DIMENSIONS OF COIL FORMERS - PART 1: COIL FORMERS FOR LAMINATED CORES |
| UNE 53940:2010 | Plastics. Polyethylene (PE) fabricated fittings for piping systems for water supply under pressure |
| I.S. EN 60384-8:2015 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 |
| BS EN ISO 3821:2010 | Gas welding equipment. Rubber hoses for welding, cutting and allied processes |
| ISO 104:2015 | Rolling bearings Thrust bearings Boundary dimensions, general plan |
| DIN 9004:1985-06 | AEROSPACE; BENDING RADII FOR TUBES; APPROXIMATE VALUES FOR COLD WORKING |
| TS 143 050 : 13.0.0 | DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2+) (GSM); TRANSMISSION PLANNING ASPECTS OF THE SPEECH SERVICE IN THE GSM PUBLIC LAND MOBILE NETWORK (PLMN) SYSTEM (3GPP TS 43.050 VERSION 14.0.0 RELEASE 14) |
| CEI EN 60384-16 : 2006 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 16: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC D.C. CAPACITORS |
| BS EN 60059 : 1999 | |
| I.S. EN 62421:2007 | ELECTRONICS ASSEMBLY TECHNOLOGY - ELECTRONIC MODULES |
| I.S. EN ISO 7840:2013 | SMALL CRAFT - FIRE RESISTANT FUEL HOSES (ISO 7840:2013) |
| UNE-EN 60269-4:2011 | Low-voltage fuses -- Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices |
| NF ISO 4156-3 : 2006 | STRAIGHT CYLINDRICAL INVOLUTE SPLINES - METRIC MODULE, SIDE FIT - PART 3: INSPECTION |
| I.S. EN 133200:1995 | PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (FILTERS FOR WHICH SAFETY TESTS ARE REQUIRED) (SECTIONAL SPECIFICATION) |
| I.S. EN 60317-0-3:2008 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-3: GENERAL REQUIREMENTS - ENAMELLED ROUND ALUMINIUM WIRE |
| NF ETS 300 082 : 1995 | INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - 3,1 KHZ TELEPHONY TELESERVICE - END-TO-END COMPATIBILITY REQUIREMENTS FOR TELEPHONY TERMINALS |
| I.S. EN 60127-6:2014 | MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE FUSE-LINKS |
| ISO 6993-2:2006 | Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels Part 2: Fittings for a maximum operating pressure of 200 mbar (20 kPa) |
| I.S. EN 60317-0-10:2017 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-10: GENERAL REQUIREMENTS - POLYESTER GLASS-FIBRE WOUND FUSED, UNVARNISHED, OR RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED ROUND COPPER WIRE |
| ISO 13590:2003 | Small craft Personal watercraft Construction and system installation requirements |
| OVE/ONORM EN 60384-11 : 2008 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 11: SECTIONAL SPECIFICATION - FIXED POLYETHYLENE TEREPHTHALATE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS |
| I.S. EN 134000:1994 | GENERIC SPECIFICATION: VARIABLE CAPACITORS (QUALIFICATION APPROVAL AND CAPABILITY APPROVAL) |
| ISO 3684:1990 | Conveyor belts — Determination of minimum pulley diameters |
| BS 5989-1:1980 | Rolling bearings: metric thrust bearings Specification for dimensions of thrust ball bearings with flat back faces |
| UNE-EN ISO 4064-1:2015 | Water meters for cold potable water and hot water - Part 1: Metrological and technical requirements (ISO 4064-1:2014) |
| ISO 14531-1:2002 | Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 1: Pipes |
| I.S. CECC 33000:1994 | PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (GENERIC SPECIFICATION) |
| CEI EN 60076-1 : 2015 | POWER TRANSFORMERS - PART 1: GENERAL |
| ISO 10110-7:2017 | Optics and photonics — Preparation of drawings for optical elements and systems — Part 7: Surface imperfections |
| ANSI/ASA S1.6 : 2016 | PREFERRED FREQUENCIES AND FILTER BAND CENTER FREQUENCIES FOR ACOUSTICAL MEASUREMENTS |
| UNI EN ISO 7840 : 2013 | SMALL CRAFT - FIRE-RESISTANT FUEL HOSES |
| BS EN ISO 11297-3:2013 | Plastics piping systems for renovation of underground drainage and sewerage networks under pressure Lining with close-fit pipes |
| UNI EN ISO 11297-3 : 2013 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND DRAINAGE AND SEWERAGE NETWORKS UNDER PRESSURE - PART 3: LINING WITH CLOSE-FIT PIPES |
| DIN EN ISO 15494:2016-03 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT), CROSSLINKED POLYETHYLENE (PE-X), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 15494:2015) |
| ISO 96-1:2016 | Textile machinery and accessories Rings and travellers for ring spinning and ring twisting frames Part 1: Flange rings T and SF and their travellers |
| UNE-EN ISO 7840:2014 | Small craft - Fire-resistant fuel hoses (ISO 7840:2013) |
| BS EN 131200:2002 | Harmonized system of quality assessment for electronic components. Sectional Specification. Fixed capacitors with metallized electrodes and polypropylene dielectric |
| IEC 60384-8:2015 | Fixed capacitors for use in electronic equipment - Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1 |
| NF EN 12261 : 2002 AMD 1 2006 | GAS METERS - TURBINE GAS METERS |
| CEI EN 62391-2 : 2006 | FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - ELECTRIC DOUBLE-LAYER CAPACITORS FOR POWER APPLICATION |
| CEN/TS 15223:2017 | Plastics piping systems - Validated design parameters of buried thermoplastics piping systems |
| I.S. EN 60269-4:2009 | LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES |
| UNE-EN 60947-7-3:2011 | Low-voltage switchgear and controlgear -- Part 7-3: Ancillary equipment - Safety requirements for fuse terminal blocks |
| I.S. EN 60317-0-7:2017 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-7: GENERAL REQUIREMENTS - FULLY INSULATED (FIW) ZERO-DEFECT ENAMELLED ROUND COPPER WIRE |
| ANSI B92.2M : 1980 | METRIC MODULE, INVOLUTE SPLINES |
| EN 60384-1:2016 | Fixed capacitors for use in electronic equipment - Part 1: Generic specification |
| EN 60938-2:1999/A1:2007 | FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 2: SECTIONAL SPECIFICATION |
| CEI EN 130900 : 1998 | SECTIONAL SPECIFICATION - FIXED POLYSTYRENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS |
| I.S. EN 61050:1993 | TRANSFORMERS FOR TUBULAR DISCHARGE LAMPS HAVING A NON LOAD OUTPUT VOLTAGE EXCEEDING 1000 V (GENERALLY CALLED NEON TRANSFORMERS) - GENERAL AND SAFETY REQUIREMENTS |
| ISO 8779:2010 | Plastics piping systems Polyethylene (PE) pipes for irrigation Specifications |
| ISO 4427-1:2007 | Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part 1: General |
| I.S. EN 60127-3:2015 | MINIATURE FUSES - PART 3: SUB-MINIATURE FUSE-LINKS |
| ISO 15439-1:2007 | Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) Polyamide (PA) Part 1: General |
| I.S. EN 60127-2:2014 | MINIATURE FUSES - PART 2: CARTRIDGE FUSE-LINKS |
| I.S. EN 60384-23:2015 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 23: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT METALLIZED POLYETHYLENE NAPHTHALATE FILM DIELECTRIC DC CAPACITORS |
| EN ISO 11299-3:2013 | Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2011) |
| ISO 17089-2:2012 | Measurement of fluid flow in closed conduits - Ultrasonic meters for gas — Part 2: Meters for industrial applications |
| ISO 4422-1:1996 | Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply Specifications Part 1: General |
| I.S. EN 62391-2:2006 | FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - ELECTRIC DOUBLE-LAYER CAPACITORS FOR POWER APPLICATION |
| ISO 6993:2001 | Buried, high-impact poly(vinyl chloride) (PVC-HI) pipes for the supply of gaseous fuels Specifications |
| ISO 8039:2014 | Microscopes — Values, tolerances and symbols for magnification |
| I.S. EN 138100:1998 | FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS WHICH SAFETY TESTS ARE REQUIRED) (SECTIONAL SPECIFICATION) |
| I.S. EN 60317-0-1:2014 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-1: GENERAL REQUIREMENTS - ENAMELLED ROUND COPPER WIRE |
| IEC 61007:1994 | Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures |
| I.S. EN ISO 32100:2010 | RUBBER- OR PLASTICS-COATED FABRICS - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF FLEX RESISTANCE BY THE FLEXOMETER METHOD |
| EN 60269-6:2011 | Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems |
| DIN EN 10243-2 : 2005-07 | STEEL DIE FORGINGS - TOLERANCES ON DIMENSIONS - PART 2: UPSET FORGINGS MADE ON HORIZONTAL FORGING MACHINES |
| DIN EN ISO 2157:2016-10 | DENTISTRY - NOMINAL DIAMETERS AND DESIGNATION CODE NUMBERS FOR ROTARY INSTRUMENTS (ISO 2157:2016) |
| DIN EN 10243-1 : 2007-12 | STEEL DIE FORGINGS - TOLERANCES ON DIMENSIONS - PART 1: DROP AND VERTICAL PRESS FORGINGS |
| BS EN ISO 5172 : 2006 | GAS WELDING EQUIPMENT - BLOWPIPES FOR GAS WELDING, HEATING AND CUTTING - SPECIFICATIONS AND TESTS |
| IEC 60317-0-2:2013 | Specifications for particular types of winding wires - Part 0-2: General requirements - Enamelled rectangular copper wire |
| UNE-EN 60317-52:2014 | Specifications for particular types of winding wires - Part 52: Aromatic polyamide (aramid) tape wrapped round copper wire, temperature index 220 |
| ISO 6224:2011 | Thermoplastics hoses, textile-reinforced, for general-purpose water applications — Specification |
| BS EN 14268:2005 | Irrigation techniques. Meters for irrigation water |
| IEC 60384-3:2016 | Fixed capacitors for use in electronic equipment - Part 3: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with solid (MnO<sub>2</sub>) electrolyte |
| UNE-EN 60118-0:2016 | Electroacoustics - Hearing aids - Part 0: Measurement of the performance characteristics of hearing aids |
| IEC 60118-0:2015 | Electroacoustics - Hearing aids - Part 0: Measurement of the performance characteristics of hearing aids |
| ISO 1119:2011 | Geometrical product specifications (GPS) — Series of conical tapers and taper angles |
| IEC 60317-0-5:2006 | Specifications for particular types of winding wires - Part 0-5: General requirements - Glass-fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire |
| IEC 60317-52:2014 | Specifications for particular types of winding wires - Part 52: Aromatic polyamide (aramid) tape wrapped round copper wire, temperature index 220 |
| IEC 61797-1:1996 | Transformers and inductors for use in telecommunication and electronic equipment - Main dimensions of coil formers - Part 1: Coil formers for laminated cores |
| IEC 60384-19:2015 | Fixed capacitors for use in electronic equipment - Part 19: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors |
| IEC 60384-2:2011 | Fixed capacitors for use in electronic equipment - Part 2: Sectional specification - Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors |
| ISO 4064-1:2014 | Water meters for cold potable water and hot water Part 1: Metrological and technical requirements |
| BS EN ISO 6224:2011 | Thermoplastics hoses, textile-reinforced, for general-purpose water applications. Specification |
| UNE-EN ISO 3821:2011 | Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO 3821:2008) |
| UNE-EN 60076-1:2013 | Power transformers - Part 1: General |
| BS EN 10243-2:1999 | Steel die forgings. Tolerances on dimensions Upset forgings made on horizontal forging machines |
| IEC 60317-0-3:2008+AMD1:2013 CSV | Specifications for particular types of winding wires - Part 0-3:General requirements - Enamelled round aluminium wire |
| IEC 60384-1:2016 | Fixed capacitors for use in electronic equipment - Part 1: Generic specification |
| UNE-EN 1555-1:2011 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General |
| IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV | Low-voltage fuses - Part 1: General requirements |
| IEC 60384-23:2015 | Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed metallized polyethylene naphthalate film dielectric surface mount d.c. capacitors |
| IEC 60384-25:2015 | Fixed capacitors for use in electronic equipment - Part 25: Sectional specification: Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte |
| IEC 60384-16:2005 | Fixed capacitors for use in electronic equipment - Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors |
| IEC 60384-9:2015 | Fixed capacitors for use in electronic equipment - Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2 |
| IEC 60852-4:1996 | Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 4: Transformers and inductors using YUI-2 laminations |
| IEC 62421:2007 | Electronics assembly technology - Electronic modules |
| UNE-EN 60317-0-4:2016 | Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire |
| BS EN 10243-1:1999 | Steel die forgings. Tolerances on dimensions Drop and vertical press forgings |
| IEC 60947-7-3:2009 | Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment - Safety requirements for fuse terminal blocks |
| IEC 60317-0-8:2012 | Specifications for particular types of winding wires - Part 0-8: General requirements - Polyester glass fibre wound, resin or varnish impregnated or not impregnated, bare or enamelled rectangular copper wire |
| ISO 13351:2009 | Fans — Dimensions |
| ISO 15493:2003 | Plastics piping systems for industrial applications Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) Specifications for components and the system Metric series |
| IEC 60384-18:2016 | Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO<sub>2</sub>) and non-solid electrolyte |
| ISO 266:1997 | Acoustics — Preferred frequencies |
| UNE-EN 60317-44:1997 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 44: AROMATIC POLYIMIDE TAPE WRAPPED RECTANGULAR COPPER WIRE, CLASS 240. |
| IEC 60127-5:2016 | Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links |
| 15/30328159 DC : 0 | BS EN 61558-1 - SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| IEC 60317-43:1997+AMD1:2010 CSV | Specifications for particular types of winding wires - Part 43: Aromatic polyimide type wrapped round copper wire, class 240 |
| IEC 60076-1:2011 | Power transformers - Part 1: General |
| ISO 693:1982 | Dimensions of seam welding wheel blanks |
| IEC 60384-4:2016 | Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Fixed aluminium electrolytic capacitors with solid (MnO<sub>2</sub>) and non-solid electrolyte |
| IEC 60317-44:1997+AMD1:2010 CSV | Specifications for particular types of winding wires - Part 44: Aromatic polyimide tape wrapped rectangular copper wire, class 240 |
| IEC 60384-21:2011 | Fixed capacitors for use in electronic equipment - Part 21: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 |
| ISO 5596:1999 | Hydraulic fluid power Gas-loaded accumulators with separator Ranges of pressures and volumes and characteristic quantities |
| IEC 60938-2:1999+AMD1:2006 CSV | Fixed inductors for electromagnetic interference suppression - Part 2: Sectional specification |
| IEC 60384-11:2008 | Fixed capacitors for use in electronic equipment - Part 11: Sectional specification - Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors |
| IEC 60384-20:2015 | Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors |
| BS EN 14154-1 : 2005 | WATER METERS - PART 1: GENERAL REQUIREMENTS |
| IEC 60127-3:2015 | Miniature fuses - Part 3: Sub-miniature fuse-links |
| ISO 5172:2006 | Gas welding equipment Blowpipes for gas welding, heating and cutting Specifications and tests |
| IEC 60317-0-6:2001+AMD1:2006 CSV | Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire |
| IEC 60384-22:2011 | Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 |
| IEC 60127-6:2014 | Miniature fuses - Part 6: Fuse-holders for miniature fuse-links |
| IEC 62674-1:2012 | High frequency inductive components - Part 1: Fixed surface mount inductors for use in electronic and telecommunication equipment |
| IEC 60384-6:2005 | Fixed capacitors for use in electronic equipment - Part 6: Sectional specification - Fixed metallized polycarbonate film dielectric d.c. capacitors |
| UNE-EN ISO 2157:2016 | Dentistry - Nominal diameters and designation code numbers for rotary instruments (ISO 2157:2016) |
| BS EN 14408-3:2004 | Plastics piping systems for renovation of underground gas supply networks Lining with close-fit pipes |
| ISO 10931:2005 | Plastics piping systems for industrial applications Poly(vinylidene fluoride) (PVDF) Specifications for components and the system |
| IEC 60384-13:2011 | Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil d.c. capacitors |
| DIN ISO 3320:2016-01 | FLUID POWER SYSTEMS AND COMPONENTS - CYLINDER BORES AND PISTON ROD DIAMETERS AND AREA RATIOS - METRIC SERIES (ISO 3320:2013) |
| EN 14409-3:2004 | Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close fit-pipes |
| EN ISO 12162:2009 | Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009) |
| EN ISO 2157:2016 | Dentistry - Nominal diameters and designation code numbers for rotary instruments (ISO 2157:2016) |
| EN 1452-1 : 1999 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL |
| EN 14154-2:2005+A2:2011 | Water meters - Part 2: Installation and conditions of use |
| EN ISO 3821:2010 | Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO 3821:2008) |
| EN 4199-004:2014 | Aerospace series - Bonding straps for aircraft - Part 004: Round bonding straps, copper, tin plated -65 °C up to 150 °C and nickel plated -65 °C up to 260 °C - Product Standard |
| EN ISO 1452-1:2009 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General (ISO 1452-1:2009) |
| EN ISO 8029:2014 | Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification (ISO 8029:2014) |
| EN ISO 4064-1:2017 | Water meters for cold potable water and hot water - Part 1: Metrological and technical requirements (ISO 4064-1:2014) |
| EN ISO 13351:2009 | Fans - Dimensions (ISO 13351:2009) |
| EN ISO 6224:2011 | Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2011) |
| EN ISO 21003-1:2008 | Multilayer piping systems for hot and cold water installations inside buildings - Part 1: General (ISO 21003-1:2008) |
| EN 14408-3:2004 | Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes |
| EN 20693:1991 | Dimensions of seam welding wheel blanks (ISO 693:1982) |
| EN 874 : 1995 | GAS WELDING EQUIPMENT - OXYGEN/FUEL GAS BLOWPIPES (CUTTING MACHINE TYPE) OF CYLINDRICAL BARREL - TYPE OF CONSTRUCTION, GENERAL SPECIFICATIONS, TEST METHODS |
| EN ISO 266:1997 | Acoustics - Preferred frequencies (ISO 266:1997) |
| EN ISO 1119:2011 | Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011) |
| IEEE DRAFT C63.19 : 2005 | METHODS OF MEASUREMENT OF COMPATIBILITY BETWEEN WIRELESS COMMUNICATIONS DEVICES AND HEARING AIDS |
| BIS IS 13730-0-3 : 2012(R2017) | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0: GENERAL REQUIREMENTS - SECTION 3: ENAMELLED ROUND ALUMINIUM WIRE |
| BS ISO 14531-2:2004 | Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications Fittings for heat-fusion jointing |
| ISO 96-2:2009 | Textile machinery and accessories Rings and travellers for ring spinning and ring twisting frames Part 2: HZ- and J-rings and their travellers |
| I.S. EN 60127-7:2016 | MINIATURE FUSES - PART 7: MINIATURE FUSE-LINKS FOR SPECIAL APPLICATIONS |
| 17/30363924 DC : 0 | BS EN 17176-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE GROUND DRAINAGE, SEWERAGE AND IRRIGATION UNDER PRESSURE - ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) - PART 1: GENERAL |
| 10/30216887 DC : 0 | BS EN 60317-0-8 - SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-8: GENERAL REQUIREMENTS - POLYESTER GLASS FIBRE WOUND, RESIN OR VARNISH IMPREGNATED OR NOT IMPREGNATED, BARE OR ENAMELLED RECTANGULAR COPPER WIRE |
| BS ISO 3334:2006 | Micrographics. ISO resolution test chart No 2. Description and use |
| BS ISO 96-1:2016 | Textile machinery and accessories. Rings and travellers for ring spinning and ring twisting frames Flange rings T and SF and their travellers |
| 10/30206101 DC : 0 | BS ISO 11299-3 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LIMNING WITH CLOSE-FIT PIPES |
| ISO 17467-1:2012 | Plastics piping systems for the supply of gaseous fuels Unplasticized polyamide (PA-U) piping systems jointed by solvent cement Part 1: General |
| BS CECC 43000(1982) : AMD 7315 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: GENERIC SPECIFICATION: DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS |
| BS CECC 31700:1986 | Harmonized system of quality assessment for electronic components. Sectional specification: fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric |
| 13/30289543 DC : 0 | BS EN 60384-4 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO2) AND NON-SOLID ELECTROLYTE |
| I.S. EN 60317-52:2014 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 52: AROMATIC POLYAMIDE (ARAMID) TAPE WRAPPED ROUND COPPER WIRE, TEMPERATURE INDEX 220 |
| BS EN 60384-22:2012 | Fixed capacitors for use in electronic equipment Sectional specification. Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 |
| DIN EN ISO 32100:2016-11 (Draft) | RUBBER- OR PLASTICS-COATED FABRICS - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF FLEX RESISTANCE BY THE FLEXOMETER METHOD |
| 16/30339983 DC : 0 | BS ISO 8535-1 - DIESEL ENGINES - STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES - PART 1: REQUIREMENTS FOR SEAMLESS COLD-DRAWN SINGLE-WALL TUBES |
| 17/30361344 DC : 0 | BS EN ISO 11298-3 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES |
| CEI EN 60077-5 : 2004 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 5: ELECTROTECHNICAL COMPONENTS - RULES FOR HV FUSES |
| 16/30337983 DC : 0 | BS ISO 15 - ROLLING BEARINGS - RADIAL BEARINGS - BOUNDARY DIMENSIONS, GENERAL PLAN |
| ISO 21004:2006 | Plastics piping systems Multilayer pipes and their joints, based on thermoplastics, for water supply |
| OIML R 49-1 : 2013 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| PREN 17176-1 : DRAFT 2017 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE GROUND DRAINAGE, SEWERAGE AND IRRIGATION UNDER PRESSURE - ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) - PART 1: GENERAL |
| 16/30340751 DC : 0 | BS EN ISO 32100 - RUBBER- OR PLASTICS-COATED FABRICS - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF FLEX RESISTANCE BY THE FLEXOMETER METHOD |
| 09/30203522 DC : 0 | BS ISO 1174-1 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - DRIVING SQUARES - PART 1: DRIVING SQUARES FOR HAND SOCKET TOOLS |
| BS ISO 4427-1 : 2007 | PLASTICS PIPING SYSTEMS - POLYETHYLENE (PE) PIPES AND FITTINGS FOR WATER SUPPLY - PART 1: GENERAL |
| BS EN 62421:2007 | Electronics assembly technology. Electronic modules |
| UNE 53508-1:2011 | Rubber. Tolerances for products of solid rubber. Part 1: Dimensional tolerances |
| OVE/ONORM EN 60317-0-7 : 2013 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-7: GENERAL REQUIREMENTS - FULLY INSULATED (FIW) ZERO-DEFECT ENAMELLED ROUND COPPER WIRE WITH NOMINAL CONDUCTOR DIAMETER OF 0,040 MM TO 1,600 MM (IEC 60317-0-7:2012) |
| BS CECC 32100:1992 | Harmonized system of quality assessment for electronic components. Sectional specification: fixed multilayer ceramic chip capacitors |
| 17/30349734 DC : 0 | BS EN 60384-26 ED.2.0 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE |
| BS EN 60317-0-1:2014 | Specifications for particular types of winding wires General requirements. Enamelled round copper wire |
| ISO 7840:2013 | Small craft Fire-resistant fuel hoses |
| 05/30128435 DC : DRAFT JAN 2005 | IEC 60317-0-5 ED.2 - SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-5: GENERAL REQUIREMENTS - GLASS-FIBRE BRAIDED RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED RECTANGULAR COPPER WIRE |
| I.S. EN ISO 4064-1:2017 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS (ISO 4064-1:2014) |
| BS 6201-2:1982 | Fixed capacitors for use in electronic equipment. Specification for fixed capacitors of ceramic dielectric, Class 2. Selection of methods of test and general requirements |
| BS EN ISO 11298-3:2011 | Plastics piping systems for renovation of underground water supply networks Lining with close-fit pipes |
| 05/30127475 DC : DRAFT JAN 2005 | |
| I.S. EN 60384-16:2005 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 16: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC D.C. CAPACITORS |
| 08/30192301 DC : 0 | BS EN 60384-26 ED.1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26: SECTIONAL SPECIFICATION - ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE |
| BS EN 60317-0-4:2016 | Specifications for particular types of winding wires General requirements. Glass-fibre wound, resin or varnish impregnated, bare or enameled rectangular copper wire |
| DD ISO/TS 3669-2:2007 | Vacuum technology. Bakable flanges Dimensions of knife-edge flanges |
| BS 7579:1992 | Specification for designation and nominal sizes of openings for woven wire cloth, perforated plate and electroformed sheet for industrial screens |
| BS ISO 4150:2011 | Green coffee or raw coffee. Size analysis. Manual and machine sieving |
| BS ISO 18692:2007 | Fibre ropes for offshore stationkeeping. Polyester |
| BS ISO 18225:2012 | Plastics piping systems. Multilayer piping systems for outdoor gas installations. Specifications for systems |
| BS QC 300300:1998 | Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification: aluminium electrolytic capacitors with solid and non-solid electrolyte |
| BS EN 60317-0-7:2017 | Specifications for particular types of winding wires General requirements. Fully insulated (FIW) zero-defect enamelled round copper wire |
| UNE-EN ISO 8029:2014 | Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification (ISO 8029:2014) |
| I.S. EN ISO 13351:2009 | FANS - DIMENSIONS |
| 10/30209612 DC : 0 | BS ISO 1119 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES |
| BS ISO 4782:1987 | Specification for metal wire for industrial wire screens and woven wire cloth |
| BS ISO 8584-1:1990 | Thermoplastics pipes for industrial applications under pressure. Determination of the chemical resistance factor and of the basic stress Polyolefin pipes |
| BS ISO 17484-1:2014 | Plastics piping systems. Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) Specifications for systems |
| BS EN 60317-0-9:2015 | Specifications for particular types of winding wires General requirements. Enamelled rectangular aluminium wire |
| BS ISO 17885:2015 | Plastics piping systems. Mechanical fittings for pressure piping systems. Specifications |
| BS EN 60317-0-10:2017 | Specifications for particular types of winding wires General requirements. Polyester glass-fibre wound fused, unvarnished, or resin or varnish impregnated, bare or enamelled round copper wire |
| UNI EN ISO 11298-3 : 2011 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES |
| 17/30356728 DC : 0 | BS EN 12261 - GAS METERS - TURBINE GAS METERS |
| I.S. 531:1991 | TANTALUM SURFACE MOUNTING CAPACITORS (SECTIONAL SPECIFICATION) (REVISION) |
| BS ISO 16422:2014 | Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure. Specifications |
| 11/30237753 DC : 0 | BS ISO 17484-1 - PLASTICS PIPING SYSTEMS - MULTILAYER PIPE SYSTEMS FOR INDOOR GAS INSTALLATIONS WITH A MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 5 BAR (500 KPA) - PART 1: SPECIFICATIONS FOR SYSTEMS |
| CEI EN 60384-2 : 2013 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYETHYLENE TEREPHTHALATE FILM DIELECTRIC D.C. CAPACITORS |
| BS 2547-8:1983 | Specification for basic dimensions of cones and tubes for winding textile yarns Inner diameters and lengths of cylindrical tubes |
| 09/30197220 DC : 0 | BS ISO 4150 - GREEN COFFEE - SIZE ANALYSIS - MANUAL AND MACHINE SIEVING |
| BS EN 60384-11:2008 | Fixed capacitors for use in electronic equipment Sectional specification. Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors |
| BS EN 60317-0-2:2014 | Specifications for particular types of winding wires General requirements. Enamelled rectangular copper wire |
| BS EN 60269-6:2011 | Low-voltage fuses Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems |
| BS EN 61797-1:1997 | Transformers and inductors for use in telecommunication and electronic equipment. Main dimensions of coil formers Coil formers for laminated cores |
| BS CECC 31800:1988 | Harmonized system of quality assessment for electronic components. Sectional specification: fixed polypropylene film dielectric metal foil d.c. capacitors |
| BS EN 60384-3:2006 | Fixed capacitors for use in electronic equipment Sectional specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte |
| BS QC 300700:1992 | Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification for fixed capacitors of ceramic dielectric, class 2 |
| DIN SPEC 19674-2:2011-02 | Plastics piping systems made from glass fibre reinforced polyethylene (PE-GF) for water supply and for drainage and sewerage under pressure - Part 2: Pipes |
| 00/717057 DC : DRAFT NOV 2000 | PREN 4199-004 - AEROSPACE SERIES - BONDING STRAPS FOR AIRCRAFT, COPPER, TIN PLATED, -65 DEGREE C TO +260 DEGREE C - PART 004: PRODUCT STANDARD |
| 04/30111650 DC : DRAFT MARCH 2004 | |
| ISO 19899:2010 | Plastics piping systems Polyolefin pipes and mechanical fitting assemblies Test method for the resistance to end load (AREL test) |
| PREN 12261 : DRAFT 2017 | GAS METERS - TURBINE GAS METERS |
| 05/30130085 DC : DRAFT JUN 2005 | ISO 18692 - FIBRE ROPES FOR OFFSHORE STATION KEEPING - POLYESTER |
| BS CECC 40200:1981 | Harmonized system of quality assessment for electronic components: sectional specification: fixed power resistors |
| BS EN 133100:1998 | Harmonized system of quality assessment for electronic components. Sectional specification:passive filter units for electromagnetic interference suppression. Filters for which safety tests are not required |
| PREN ISO 1119 : DRAFT 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES |
| I.S. EN 60269-6:2011 | LOW-VOLTAGE FUSES - PART 6: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SOLAR PHOTOVOLTAIC ENERGY SYSTEMS |
| BS EN 60384-17:2005 | Fixed capacitors for use in electronic equipment Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors |
| BS ISO 1403 : 1995 AMD 9703 | RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATIONS |
| DIN VDE 0636-10 : 1992 | LOW-VOLTAGES FUSES; GENERAL REQUIREMENTS |
| TS 100 903 : 5.4.0 | DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2+); TRANSMISSION PLANNING ASPECTS OF THE SPEECH SERVICE IN THE GSM PUBLIC LAND MOBILE NETWORK (PLMN) SYSTEM |
| BS EN ISO 7840:2013 | Small craft. Fire-resistant fuel hoses |
| CEI EN 60384-23 : 2016 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 23: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT METALLIZED POLYETHYLENE NAPHTHALATE FILM DIELECTRIC DC CAPACITORS |
| I.S. EN 60269-1:2007 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS |
| CAN/CSA-C22.2 NO. 60947-7-3:17 | Low-voltage switchgear and controlgear ? Part 7-3: Ancillary equipment ? Safety requirements for fuse terminal blocks (Trinational standard NMX-J-538/7-3-ANCE with UL 60947-7-3) |
| I.S. EN 12261:2002 | GAS METERS - TURBINE GAS METERS |
| I.S. EN ISO 11298-3:2011 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES |
| NF EN ISO 32100 : 2011 | RUBBER- OR PLASTIC-COATED FABRICS - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF FLEX RESISTANCE BY THE FLEXOMETER METHOD |
| I.S. EN 60384-26:2010 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE |
| I.S. EN 60063:2015 | PREFERRED NUMBER SERIES FOR RESISTORS AND CAPACITORS |
| ISO 4156-1:2005 | Straight cylindrical involute splines Metric module, side fit Part 1: Generalities |
| UNE-EN 60317-0-10:2017 | Specifications for particular types of winding wires - Part 0-10: General requirements - Polyester glass-fibre wound fused, unvarnished, or resin or varnish impregnated, bare or enamelled round copper wire |
| I.S. EN 60127-4:2005 | MINIATURE FUSES - PART 4: UNIVERSAL MODULAR FUSE-LINKS (UMF) - THROUGH-HOLE AND SURFACE MOUNT TYPES (IEC 60127-4:2005 (EQV)) |
| I.S. EN 60384-3:2016 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) ELECTROLYTE |
| EN 60317-0-7:2017 | Specifications for particular types of winding wires - Part 0-7: General requirements - Fully insulated (FIW) zero-defect enamelled round copper wire |
| NF EN 60269-6 : 2011 | LOW-VOLTAGE FUSES - PART 6: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SOLAR PHOTOVOLTAIC ENERGY SYSTEMS |
| I.S. EN 132400:1994 | SECTIONAL SPECIFICATION: FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS (ASSESSMENT LEVEL D) |
| BS ISO 8779 : 2010 | PLASTICS PIPING SYSTEMS - POLYETHYLENE (PE) PIPES FOR IRRIGATION - SPECIFICATIONS |
| CEI EN 60384-8 : 2016 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 |
| EN ISO 15494:2015 | Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015) |
| UNE-EN 60317-0-9:2016 | Specifications for particular types of winding wires - Part 0-9: General requirements - Enamelled rectangular aluminium wire |
| CEI EN 60118-0 : 2016 | ELECTROACOUSTICS - HEARING AIDS - PART 0: MEASUREMENT OF THE PERFORMANCE CHARACTERISTICS OF HEARING AIDS |
| EN ISO 7840:2013 | Small craft - Fire-resistant fuel hoses (ISO 7840:2013) |
| UNI 10667-13 : 2013 | PLASTIC RAW-SECONDARY MATERIALS FILLERS OBTAINED FROM GRINDING OF PRODUCTION AND/OR POST-CONSUMER WASTE OF REINFORCED PLASTICS COMPOSITES - PART 13: REQUIREMENTS AND TEST METHODS |
| ISO 16422:2014 | Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications |
| UNI EN ISO 13351 : 2010 | FANS - DIMENSIONS |
| I.S. EN 60076-1:2011 | POWER TRANSFORMERS - PART 1: GENERAL (IEC 60076-1:2011) |
| I.S. EN ISO 21003-1:2008 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL |
| ISO 6993-1:2006 | Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa) |
| UNE-EN 60269-6:2012 | Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems |
| ISO 12162:2009 | Thermoplastics materials for pipes and fittings for pressure applications Classification, designation and design coefficient |
| ISO 8085-1:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels Metric series Specifications Part 1: Fittings for socket fusion using heated tools |
| UNE-ISO 16422:2015 | Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure. Specifications |
| EN ISO 8596:2018 | Ophthalmic optics - Visual acuity testing -- Standard and clinical optotypes and their presentation (ISO 8596:2017) |
| ISO 4150:2011 | Green coffee or raw coffee — Size analysis — Manual and machine sieving |
| NF EN 60317 0-3 : 2008 AMD 1 2014 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-3: GENERAL REQUIREMENTS - ENAMELLED ROUND ALUMINIUM WIRE |
| UNE-EN ISO 11297-3:2014 | Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2013) |
| ANSI/ASA S3.7 : 2016 | METHOD FOR MEASUREMENT AND CALIBRATION OF EARPHONES |
| ES 201 168 : 1.2.1 | CORPORATE TELECOMMUNICATION NETWORKS (CN); TRANSMISSION CHARACTERISTICS OF DIGITAL PRIVATE BRANCH EXCHANGES (PBXS) |
| DIN EN ISO 8469:2013-12 | SMALL CRAFT - NON-FIRE-RESISTANT FUEL HOSES (ISO 8469:2013) |
| DIN EN ISO 11297-3:2013-11 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND DRAINAGE AND SEWERAGE NETWORKS UNDER PRESSURE - PART 3: LINING WITH CLOSE-FIT PIPES (ISO 11297-3:2013) |
| BS ISO 10110-7:2008 | Optics and photonics. Preparation of drawings for optical elements and systems Surface imperfection tolerances |
| UNE-EN ISO 32100:2011 | Rubber- or plastics-coated fabrics - Physical and mechanical tests - Determination of flex resistance by the flexometer method (ISO 32100:2010) |
| XP I ETS 300245-4 : 99 XP | INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - TECHNICAL CHARACTERISTICS OF TELEPHONY TERMINALS - PART 4: ADDITIONAL EQUIPMENT INTERFACE (AEI) |
| I.S. EN 60384-9:2015 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 9: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2 |
| ISO 1452-1:2009 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 1: General |
| EN ISO 32100:2010 | Rubber- or plastics-coated fabrics - Physical and mechanical tests - Determination of flex resistance by the flexometer method (ISO 32100:2010) |
| ISO 32100:2010 | Rubber- or plastics-coated fabrics Physical and mechanical tests Determination of flex resistance by the flexometer method |
| I.S. EN 60384-4:2016 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) AND NON-SOLID ELECTROLYTE |
| EN 300 175-8 : 2.6.1 | DIGITAL ENHANCED CORDLESS TELECOMMUNICATIONS (DECT); COMMON INTERFACE (CI); PART 8: SPEECH AND AUDIO CODING AND TRANSMISSION |
| I.S. EN 60317-0-2:2014 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-2: GENERAL REQUIREMENTS - ENAMELLED RECTANGULAR COPPER WIRE |
| EN ISO 11298-3:2011 | Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2010) |
| I.S. EN 60384-13:2012 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 13: SECTIONAL SPECIFICATION - FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS (IEC 60384-13:2011 (EQV)) |
| ISO 8535-2:2003 | Compression-ignition engines — Steel tubes for high-pressure fuel injection pipes — Part 2: Requirements for composite tubes |
| EN 60384-24:2015/AC:2017-01 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 24: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE (IEC 60384-24:2015/COR1:2016) |
| DIN EN ISO 1119:2012-04 | Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011) |
| DIN EN 14408-3:2004-12 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES |
| DIN EN ISO 10931:2015-11 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLY(VINYLIDENE FLUORIDE) (PVDF) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 10931:2005 + AMD 1:2015) |
| IEC 60127-7:2015 | Miniature fuses - Part 7: Miniature fuse-links for special applications |
| BS EN 1452-1 : 2000 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL |
| BS EN ISO 10931 : 2005 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLY(VINYLIDENE FLUORIDE) (PVDF) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM |
| IEC 60317-0-4:2015 | Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire |
| BS EN ISO 2157:2016 | Dentistry. Nominal diameters and designation code numbers for rotary instruments |
| UNE-EN 12201-1:2012 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General |
| IEC 60034-30:2008 | Rotating electrical machines - Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code) |
| IEC 60063:2015 | Preferred number series for resistors and capacitors |
| UNE-EN ISO 1119:2012 | Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011) |
| BS EN 60317-0-5:2007 | Specifications for particular types of winding wires General requirements. Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire |
| BS ISO/IEC TR 14252:1996 | Information technology. Guide to the POSIX open system environment (OSE) |
| BS EN ISO 15493 : 2003 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS), UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) AND CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES (ISO 15493:2003) |
| BS EN ISO 266:1997 | Acoustics. Preferred frequencies |
| IEC 60317-53:2014 | Specifications for particular types of winding wires - Part 53: Aromatic polyamide (aramid) tape wrapped rectangular copper wire, temperature index 220 |
| BS EN ISO 1119:2011 | Geometrical product specifications (GPS). Series of conical tapers and taper angles |
| IEC 60269-6:2010 | Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems |
| ISO 8029:2014 | Plastics hose — General-purpose collapsible water hose, textile-reinforced — Specification |
| NF EN 60317-0-6 : 2002 AMD 1 2007 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-6: GENERAL REQUIREMENTS - GLASS-FIBER WOUND RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED ROUND COPPER WIRE |
| EN 60317-0-10:2017 | Specifications for particular types of winding wires - Part 0-10: General requirements - Polyester glass-fibre wound fused, unvarnished, or resin or varnish impregnated, bare or enamelled round copper wire |
| EN 60384-9:2015 | Fixed capacitors for use in electronic equipment - Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2 |
| EN 60317-0-8 : 2012 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-8: GENERAL REQUIREMENTS - POLYESTER GLASS FIBRE WOUND, RESIN OR VARNISH IMPREGNATED OR NOT IMPREGNATED, BARE OR ENAMELLED RECTANGULAR COPPER WIRE (IEC 60317-0-8:2012) |
| EN 14154-1:2005+A2:2011 | Water meters - Part 1: General requirements |
| EN 134100:1995 | Sectional Specification: Variable capacitors (Qualification approval) |
| DIN EN ISO 2157:1995-04 | DENTISTRY - NOMINAL DIAMETERS AND DESIGNATION CODE NUMBERS FOR ROTARY INSTRUMENTS (ISO 2157:2016) |
| EN 132400 : 1994 AMD 4 2001 | SECTIONAL SPECIFICATION: FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS (ASSESSMENT LEVEL D) |
| EN 60127-7:2016 | Miniature fuses - Part 7: Miniature fuse-links for special applications |
| EN 60384-11:2008 | Fixed capacitors for use in electronic equipment - Part 11: Sectional specification - Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors |
| DIN ISO 96-1:2017-03 | TEXTILE MACHINERY AND ACCESSORIES - RINGS AND TRAVELLERS FOR RING SPINNING AND RING TWISTING FRAMES - PART 1: FLANGE RINGS T AND SF AND THEIR TRAVELLERS (ISO 96-1:2016) |
| EN 60384-16:2005 | Fixed capacitors for use in electronic equipment - Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors |
| EN 60317-44:1997/A1:2010 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 44: AROMATIC POLYIMIDE TAPE WRAPPED RECTANGULAR COPPER WIRE, CLASS 240 |
| EN 60127-2:2014 | Miniature fuses - Part 2: Cartridge fuse-links |
| DIN EN ISO 13590:2004-11 | SMALL CRAFT - PERSONAL WATERCRAFT - CONSTRUCTION AND SYSTEM INSTALLATION REQUIREMENTS |
| DIN EN 10243-1:2000-06 | STEEL DIE FORGINGS - TOLERANCES ON DIMENSIONS - PART 1: DROP AND VERTICAL PRESS FORGINGS |
| EN 62391-2:2006 | Fixed electric double-layer capacitors for use in electronic equipment - Part 2: Sectional specification - Electric double-layer capacitors for power application |
| EN 60063:2015 | Preferred number series for resistors and capacitors |
| CEN/TR 13259:2013 | Gas welding equipment - Industrial manual and machine blowpipes for flame heating, flame brazing and allied processes |
| EN 60059:1999/A1:2009 | |
| EN 130200:1993/A3:1998 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - SECTIONAL SPECIFICATION: FIXED TANTALUM CAPACITORS WITH NON-SOLID OR SOLID ELECTROLYTE |
| DIN EN ISO 11298-3:2011-07 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES |
| EN 143000 : 1991 | THERMISTORS (GENERIC SPECIFICATION) |
| EN 60317-43:1997/A1:2010 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 43: AROMATIC POLYIMIDE TAPE WRAPPED ROUND COPPER WIRE, CLASS 240 |
| EN 60317-0-4:2016 | Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire |
| EN 60384-21:2012 | Fixed capacitors for use in electronic equipment - Part 21: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 |
| EN 131200:2002 | Sectional Specification: Fixed capacitors with metallized electrodes and polypropylene dielectric |
| EN 60034-30:2009 | Rotating electrical machines - Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code) |
| EN 60384-4:2016 | Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Fixed aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte |
| DIN EN ISO 11299-3:2013-05 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES (ISO 11299-3:2011) |
| EN 60317-0-5:2007 | Specifications for particular types of winding wires - Part 0-5: General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire |
| DIN EN 14154-1:2011-06 | WATER METERS - PART 1: GENERAL REQUIREMENTS |
| EN 60076-1:2011 | POWER TRANSFORMERS - PART 1: GENERAL (IEC 60076-1:2011) |
| DIN EN 10243-2:2000-06 | Steel die forgings - Tolerances on dimensions - Part 2: Upset forgings made on horizontal forging machines; German version EN 10243-2:1999 |
| EN 60118-0:2015 | Electroacoustics - Hearing aids - Part 0: Measurement of the performance characteristics of hearing aids |
| EN 60384-17:2005 | Fixed capacitors for use in electronic equipment - Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors |
| DIN EN 61558-2-17 : 1998 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLY UNITS AND SIMILAR - PART 2-17: PARTICULAR REQUIREMENTS FOR TRANSFORMERS FOR SWITCH MODE POWER SUPPLIES |
| DIN EN ISO 6224:2012-02 | Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2011) |
| EN 60384-19:2015 | Fixed capacitors for use in electronic equipment - Part 19: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors |
| EN 60127-6:2014 | Miniature fuses - Part 6: Fuse-holders for miniature fuse-links |
| EN 60852-4:1996 | Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 4: Transformers and inductors using YUI-2 laminations |
| EN 129200 : 1994 AMD 1 1995 | SECTIONAL SPECIFICATION: FIXED INDUCTORS WITH CERAMIC OR FERRITE CORE WOUND WITH COPPER WIRE FOR RF CIRCUITS |
| DIN EN ISO 4064-1:2017-10 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS (ISO 4064-1:2014) |
| EN 60317-0-3:2008/A1:2013 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-3: GENERAL REQUIREMENTS - ENAMELLED ROUND ALUMINIUM WIRE (IEC 60317-0-3:2008/A1:2013) |
| EN 60384-26:2010 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE |
| EN 60384-15:2017 | Fixed capacitors for use in electronic equipment - Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte |
| DIN EN ISO 5172:2015-12 | GAS WELDING EQUIPMENT - BLOWPIPES FOR GAS WELDING, HEATING AND CUTTING - SPECIFICATIONS AND TESTS (ISO 5172:2006 + AMD 1:2012 + AMD 2:2015) |
| EN 140000 : 1993 | GENERIC SPECIFICATION: FIXED RESISTORS |
| BS CECC 40000:1980 | Harmonized system of quality assessment for electronic components. Generic specification: fixed resistors |
| BS 88-4(1988) : 1988 AMD 14545 | CARTRIDGE FUSES FOR VOLTAGES UP TO AND INCLUDING 1000 V A.C. AND 1500 V D.C. - SPECIFICATION OF SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES |
| CSA E60384.1 : 2014 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| BS 88-1(1988) : 1988 AMD 8310 | CARTRIDGE FUSES FOR VOLTAGES UP TO AND INCLUDING 1000 V a.c. AND 1500 V d.c. - SPECIFICATION OF GENERAL REQUIREMENTS |
| CAN/CSA-E61558-1:12 (R2017) | Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests (Adopted IEC 61558- 1:1997 + A1:1998, edition 2.1, 2009-04 with Canadian deviations) | Sécurité des transformateurs, alimentations, bobines d\'inductance et produits analogues - Partie 1: Exigences générales et essais (norme CEI 61558-1:1997 + A1:1998 adoptée, édition 2.1, 2009-04 avec exigences propres au Canada) |
| BS 88-4(2007) : 2007 | LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES |
| ASME B1.13M:2005 | METRIC SCREW THREADS - M PROFILE |
| ASME B32.100 : 2016 | PREFERRED METRIC SIZES FOR FLAT, ROUND, SQUARE, RECTANGULAR AND HEXAGONAL METAL PRODUCTS |
| ASME B1.13M : 2005 (R2015) | METRIC SCREW THREADS - M PROFILE |
| BS CECC 30200:1986 | Harmonized system of quality assessment for electronic components. Sectional specification: fixed tantalum capacitors with non-solid or solid electrolyte |
| BS 4265:1977 | Specification for cartridge fuse links for miniature fuses |
| BS 4944(1994) : 1994 AMD 8405 | REACTORS |
| CSA E61558.1:2012 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| BS CECC 30000:1992 | Harmonized system of quality assessment for electronic components. Generic specification: fixed capacitors |
| BS CECC 30000:1984 | Harmonized system of quality assessment for electronic components: generic specification: fixed capacitors |
| ASME B1.13M : 2005 : R2010 | METRIC SCREW THREADS - M PROFILE |
| CEI EN 60115-1:2023 | Fixed resistors for use in electronic equipment Part 1: Generic specification |
| OVE/ONORM EN 60384-19 : 2006 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 19: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS |
| CSA E61558.1 : 2012 : INC : UPD 1 : 2014 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| BS 88-4(2009) : 2009 + A2 2016 | LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES (IEC 60269-4:2009) |
| BS 88-1(2007) : 2007 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS |
| ETSI TS 143 050 V18.0.0:2024-05 | Digital cellular telecommunications system (Phase 2+) (GSM); Transmission planning aspects of the speech service in the GSM Public Land Mobile Network (PLMN) system (3GPP TS 43.050 version 18.0.0 Release 18) |
| ETSI TS 126 260 V18.0.0:2024-05 | 5G; Objective test methodologies for the evaluation of immersive audio systems (3GPP TS 26.260 version 18.0.0 Release 18) |
| AS/NZS 1335:2020 | Gas welding equipment - Rubber hoses for welding, cutting and allied processes |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.