ISO 13357-1:2017
Current
The latest, up-to-date edition.
Petroleum products — Determination of the filterability of lubricating oils — Part 1: Procedure for oils in the presence of water
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
05-09-2017
ISO 13357-1:2017 specifies a procedure for the evaluation of the filterability of lubricating oils, particularly those designed for hydraulic applications, in the presence of water. The procedure only applies to mineral-based oils, since fluids manufactured from other materials (e.g. fire-resistant fluids) may not be compatible with the specified test membranes. The range of application has been evaluated with oils of viscosity up to ISO viscosity grade (VG) 100, as defined in ISO 3448. Within the range described, the filterability as defined is not dependent on the viscosity of the oil. The procedure is not suitable for some hydraulic oils on which specific properties have been conferred by the use of insoluble/partially soluble additives, or by particularly large molecular species.
NOTE Filterability is a prime requirement for lubricating oils used in hydraulic systems because of the fine filters used in this application.
ISO 13357-1:2017 defines a method for assessing the filterability of oils in the presence of contaminating water. It is noted that some oils will exhibit poorer filterability characteristics in these conditions. ISO 13357‑2[1] is used to investigate the filterability of an oil which is used in applications where the presence of water in the oil is unlikely. An oil which has good filterability in the presence of contaminating water will not necessarily have equally good filterability in dry conditions. An oil having good filterability only when wet is unlikely to be generally acceptable.
Committee |
ISO/TC 28
|
DevelopmentNote |
Supersedes ISO/FDIS 13357-1. (05/2017)
|
DocumentType |
Standard
|
Pages |
12
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Supersedes |
Standards | Relationship |
DIN ISO 13357-1:2019-07 (Draft) | Identical |
SS-ISO 13357-1:2017 | Identical |
PN ISO 13357-1 : 2019 | Identical |
BS ISO 13357-1:2017 | Identical |
DIN ISO 13357-1:2020-02 | Identical |
NF ISO 13357-1 : 2005 | Identical |
GOST ISO 13357-1 : 2013 | Identical |
DIN ISO 13357-1:2009-04 | Identical |
PN ISO 13357-1 : 2012 | Identical |
BS EN 61400-4:2013 | Wind turbines Design requirements for wind turbine gea |
11/30210938 DC : 0 | BS EN 61400-4 - WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES |
BS ISO 11158:2009 | Lubricants, industrial oils and related products (class L). Family H (hydraulic systems). Specifications for categories HH, HL, HM, HV and HG |
BS ISO 13357-2:2017 | Petroleum products. Determination of the filterability of lubricating oils Procedure for dry oils |
ISO 11158:2009 | Lubricants, industrial oils and related products (class L) — Family H (hydraulic systems) — Specifications for categories HH, HL, HM, HV and HG |
ISO 13357-2:2017 | Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils |
05/30098184 DC : DRAFT MAY 2005 | ISO 8068 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY T (TURBINES) - SPECIFICATIONS FOR LUBRICATING OILS FOR TURBINES |
DEFSTAN 91-39/3(2001) : 2001 | HYDRAULIC FLUID, PETROLEUM: ANTI-WEAR NATO CODE: H-576 JOINT SERVICE DESIGNATION: OM-33 |
I.S. EN 61400-4:2013 | WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES (IEC 61400-4:2012 (EQV)) |
DEFSTAN 91-35/3(2002) : 2002 | HYDRAULIC FLUID, PETROLEUM: EMULSIFYING, ANTI-WEAR JOINT SERVICE DESIGNATION: OX-30 |
BS ISO 8068:2006 | Lubricants, industrial oils and related products (class L). Family T (turbines). Specification for lubricating oils for turbines |
ISO 8068:2006 | Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specification for lubricating oils for turbines |
ASTM D 6158 : 2016-02 | SPECIFICATION FOR MINERAL HYDRAULIC OILS |
PD ISO/TR 18792:2008 | Lubrication of industrial gear drives |
UNE-EN 61400-4:2013 | Wind turbines - Part 4: Design requirements for wind turbine gearboxes |
NF ISO 13357-2 : 1999 | PETROLEUM PRODUCTS - DETERMINATION OF THE FILTERABILITY OF LUBRICATING OILS - PART 2: PROCEDURE FOR DRY OILS |
15/30316149 DC : 0 | BS ISO 13357-2 - PETROLEUM PRODUCTS - DETERMINATION OF THE FILTERABILITY OF LUBRICATING OILS - PART 2: PROCEDURE FOR DRY OIL |
DIN ISO 13357-2:2008-09 | PETROLEUM PRODUCTS - DETERMINATION OF THE FILTERABILITY OF LUBRICATING OILS - PART 2: PROCEDURE FOR DRY OILS |
ASTM D 7752 : 2018 : REDLINE | Standard Practice for Evaluating Compatibility of Mixtures of Hydraulic Fluids |
EN 61400-4:2013 | Wind turbines - Part 4: Design requirements for wind turbine gearboxes |
ISO 3170:2004 | Petroleum liquids — Manual sampling |
ISO 6614:1994 | Petroleum products — Determination of water separability of petroleum oils and synthetic fluids |
ISO 4788:2005 | Laboratory glassware — Graduated measuring cylinders |
ISO 13357-2:2017 | Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils |
ISO 1219-1:2012 | Fluid power systems and components — Graphical symbols and circuit diagrams — Part 1: Graphical symbols for conventional use and data-processing applications |
ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
ISO 3448:1992 | Industrial liquid lubricants — ISO viscosity classification |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.