ISO 13341:2010
Current
Current
The latest, up-to-date edition.
Gas cylinders — Fitting of valves to gas cylinders
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Published date
09-30-2010
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 13341:2010 specifies the procedures to be followed when connecting cylinder valves to gas cylinders. It specifically applies to all valve and cylinder combinations connected with ISO screw threads as specified in ISO 10920 and ISO 11363-1. It defines routines for inspection and preparation prior to valving for both taper and parallel screw threads.
Torque values are given for steel and aluminium gas cylinders including composite cylinders with steel or aluminium boss.
The procedures and practices specified in ISO 13341:2010 can be beneficially applied to other valve to cylinder screw thread connection systems.
| DevelopmentNote |
Supersedes ISO/DIS 13341. (10/2010)
|
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN ISO 13341 : 2010 AMD 1 2015 | Identical |
| NBN EN ISO 13341 : 2010 AMD 1 2015 | Identical |
| NS EN ISO 13341 : 2010 AMD 1 2015 | Identical |
| I.S. EN ISO 13341:2010 | Identical |
| PN EN ISO 13341 : 2010 AMD 1 2015 | Identical |
| SN EN ISO 13341 : 2011 AMD 1 2015 | Identical |
| UNI EN ISO 13341 : 2010 | Identical |
| BS EN ISO 13341 : 2010 | Identical |
| UNE-EN ISO 13341:2011 | Identical |
| DIN EN ISO 13341:2015-11 | Identical |
| UNI EN ISO 13341:2015 | Identical |
| SN EN ISO 13341:2011 | Identical |
| EN ISO 13341:2010 | Identical |
| BS EN ISO 13341:2010+A1:2015 | Identical |
| ISO 17879:2017 | Gas cylinders — Self-closing cylinder valves — Specification and type testing |
| ISO 11119-1:2012 | Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l |
| 10/30196141 DC : 0 | BS ISO 11119-3 - GAS CYLINDERS OF COMPOSITE CONSTRUCTION - SPECIFICATION AND TEST METHODS - PART 3: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS AND TUBES WITH NON-METALLIC AND NON-LOAD SHARING METAL LINERS |
| CSA Z10524-3 : 2012 : R2017 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| 11/30196123 DC : DRAFT MAY 2011 | BS ISO 11119-2 - GAS CYLINDERS OF COMPOSITE CONSTRUCTION - SPECIFICATION AND TEST METHODS - PART 2: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS WITH LOAD-SHARING METAL LINERS |
| 02/705544 DC : DRAFT APR 2002 | BS EN ISO 10297 - TRANSPORTABLE GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING |
| 06/30148182 DC : DRAFT MAY 2006 | ISO 7866 - GAS CYLINDERS REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING |
| 17/30303094 DC : 0 | BS EN ISO 10524-3 - PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| 09/30186082 DC : 0 | BS EN 13110 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS - DESIGN AND CONSTRUCTION |
| BS EN ISO 9809-2:2010 | Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Quenched and tempered steel cylinders with tensile strength greater than or equal to 1100 MPa |
| DIN EN ISO 13293:2013-03 | RECREATIONAL DIVING SERVICES - REQUIREMENTS FOR GAS BLENDER TRAINING PROGRAMMES (ISO 13293:2012) |
| BS EN ISO 7866:2012 | Gas cylinders. Refillable seamless aluminium alloy gas cylinders. Design, construction and testing |
| 12/30251283 DC : 0 | BS ISO 9809-4 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 4: STAINLESS STEEL CYLINDERS WITH AN R[M] VALUE OF LESS THAN 1100 MPA |
| 06/30148179 DC : DRAFT SEP 2006 | ISO 9809-3 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
| BIS IS/ISO 10524-3 : 2005 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| 06/30148176 DC : DRAFT SEP 2006 | ISO 9809-2 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
| I.S. EN 14638-3:2010 | TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED RECEPTACLES OF A CAPACITY NOT EXCEEDING 150 LITRES - PART 3: WELDED CARBON STEEL CYLINDERS MADE TO A DESIGN JUSTIFIED BY EXPERIMENTAL METHODS |
| I.S. EN ISO 9809-2:2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
| UNE-EN ISO 17879:2017 | Gas cylinders - Self-closing cylinder valves - Specification and type testing (ISO 17879:2017) |
| ISO 10524-3:2005 | Pressure regulators for use with medical gases Part 3: Pressure regulators integrated with cylinder valves |
| ISO 10460:2005 | Gas cylinders Welded carbon-steel gas cylinders Periodic inspection and testing |
| BS EN ISO 11623:2015 | Gas cylinders. Composite construction. Periodic inspection and testing |
| BS EN 12863:2002 | Transportable gas cylinders. Periodic inspection and maintenance of dissolved acetylene cylinders |
| BS EN 12862:2000 | Transportable gas cylinders. Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders |
| DIN EN 12863:2002-09 | TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND MAINTENANCE OF DISSOLVED ACETYLENE CYLINDERS |
| I.S. EN ISO 11623:2015 | GAS CYLINDERS - COMPOSITE CONSTRUCTION - PERIODIC INSPECTION AND TESTING (ISO 11623:2015, CORRECTED VERSION 2017-02) |
| EN ISO 10462:2013 | Gas cylinders - Acetylene cylinders - Periodic inspection and maintenance (ISO 10462:2013) |
| EN 13110:2012+A1:2017 | LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction |
| ONORM EN 12245 : 2012 | TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS |
| BS EN ISO 9809-1:2010 | Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Quenched and tempered steel cylinders with tensile strength less than 1100 MPa |
| 15/30309725 DC : 0 | BS ISO 19016 - GAS CYLINDERS - CYLINDERS AND TUBES OF COMPOSITE CONSTRUCTION - MODAL ACOUSTIC EMISSION (MAE) TESTING FOR PERIODIC INSPECTION AND TESTING |
| UNI EN ISO 9809-3 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
| 13/30274822 DC : 0 | BS ISO 11119-4 - GAS CYLINDERS - REFILLABLE COMPOSITE GAS CYLINDERS AND TUBES - DESIGN, CONSTRUCTION AND TESTING - PART 4: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS AND TUBES UP TO 450 L WITH LOAD-SHARING WELDED METALLIC LINERS |
| 16/30301299 DC : 0 | BS EN ISO 17879 - GAS CYLINDERS - SELF-CLOSING CYLINDER VALVES - SPECIFICATION AND TYPE TESTING |
| 12/30265334 DC : 0 | BS EN 13953 - LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR TRANSPORTABLE REFILLABLE CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) |
| UNI EN ISO 9809-1 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
| 06/30148173 DC : DRAFT SEP 2006 | ISO 9809-1 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
| I.S. EN ISO 10524-3:2006 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES (ISO 10524-3:2005) |
| 08/30148224 DC : DRAFT FEB 2008 | BS ISO 26444 - GAS CYLINDERS - REFILLABLE WELDED ALUMINIUM ALLOY GAS CYLINDERS FOR GREATER THAN 60 BAR TEST PRESSURE - DESIGN, CONSTRUCTION AND TESTING |
| 15/30296830 DC : 0 | BS EN ISO 18119 - GAS CYLINDERS - SEAMLESS STEEL AND SEAMLESS ALUMINIUM-ALLOY GAS CYLINDERS AND TUBES - PERIODIC INSPECTION AND TESTING |
| DIN EN ISO 7866:2013-01 | Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing (ISO 7866:2012) |
| 04/30077792 DC : DRAFT JUL 2004 | ISO 3500 - GAS CYLINDERS - SEAMLESS STEEL CO[2] CYLINDERS FOR FIXED FIRE-FIGHTING INSTALLATIONS ON SHIPS |
| 03/104313 DC : DRAFT FEB 2003 | ISO 10461 - SEAMLESS ALUMINIUM-ALLOY GAS CYLINDERS - PERIODIC INSPECTION AND TESTING |
| ISO 11119-3:2013 | Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners |
| ISO 3500:2005 | Gas cylinders — Seamless steel CO2 cylinders for fixed fire-fighting installations on ships |
| I.S. EN ISO 9809-3:2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
| UNI EN ISO 22434 : 2011 | TRANSPORTABLE GAS CYLINDERS - INSPECTION AND MAINTENANCE OF CYLINDER VALVES |
| UNE-EN ISO 13293:2013 | Recreational diving services - Requirements for gas blender training programmes (ISO 13293:2012) |
| I.S. EN ISO 10462:2013 | GAS CYLINDERS - ACETYLENE CYLINDERS - PERIODIC INSPECTION AND MAINTENANCE (ISO 10462:2013) |
| ISO 11119-2:2012 | Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners |
| EN 144-1:2018 | Respiratory protective devices - Gas cylinder valves - Part 1: Inlet connections |
| UNI EN ISO 15245-1 : 2013 | GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION |
| I.S. EN 13110:2012 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
| DIN EN ISO 22435:2013-03 | Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2007 + Amd.1:2012) (includes Amendment :2012) |
| BS EN 1968:2002 | Transportable gas cylinders. Periodic inspection and testing of seamless steel gas cylinders |
| EN 13953:2015 | LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG) |
| I.S. EN 13953:2015 | LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR TRANSPORTABLE REFILLABLE CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) |
| DIN EN 13110:2017-05 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
| I.S. EN ISO 10297:2014 | GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING (ISO 10297:2014, CORRECTED VERSION 2014-11-01) |
| I.S. EN 12245:2009 | TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS |
| 02/711723 DC : DRAFT OCT 2002 | GAS CYLINDERS - TRANSPORTABLE CYLINDERS FOR DISSOLVED ACETYLENE - PERIODIC INSPECTION AND MAINTENANCE |
| PREN 13953 : DRAFT 2012 | LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR TRANSPORTABLE REFILLABLE CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) |
| CSA Z10524-3 : 2012 : INC : AMD 1 : 2017 : R201700 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| I.S. EN 12863:2002 | TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND MAINTENANCE OF DISSOLVED ACETYLENE CYLINDERS |
| BS EN ISO 9809-3:2010 | Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Normalized steel cylinders |
| BS ISO 11119-4:2016 | Gas cylinders. Refillable composite gas cylinders. Design, construction and testing Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners |
| BS EN ISO 22434:2011 | Transportable gas cylinders. Inspection and maintenance of cylinder valves |
| BS EN 14638-3:2010 | Transportable gas cylinders. Refillable welded receptacles of a capacity not exceeding 150 litres Welded carbon steel cylinders made to a design justified by experimental methods |
| 12/30246391 DC : DRAFT JULY 2012 | BS ISO 10297 - GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING |
| 12/30245682 DC : 0 | BS EN ISO 10462 - GAS CYLINDERS - ACETYLENE CYLINDERS - PERIODIC INSPECTION AND MAINTENANCE |
| ISO 10461:2005 | Gas cylinders Seamless aluminium-alloy gas cylinders Periodic inspection and testing |
| DIN EN ISO 9809-3:2010-10 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
| I.S. EN 14876:2007 | TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND TESTING OF WELDED STEEL PRESSURE DRUMS |
| ISO 13770:1997 | Aluminium alloy gas cylinders — Operational requirements for avoidance of neck and shoulder cracks |
| I.S. EN ISO 17879:2017 | GAS CYLINDERS - SELF-CLOSING CYLINDER VALVES - SPECIFICATION AND TYPE TESTING (ISO 17879:2017) |
| BS ISO 3500 : 2005 | GAS CYLINDERS - SEAMLESS STEEL CO[2] CYLINDERS FOR FIXED FIRE-FIGHTING INSTALLATIONS ON SHIPS |
| I.S. EN 144-1:2000 | RESPIRATORY PROTECTIVE DEVICES - GAS CYLINDER VALVES - PART 1: INLET CONNECTIONS |
| ISO 18119:2018 | Gas cylinders — Seamless steel and seamless aluminium-alloy gas cylinders and tubes — Periodic inspection and testing |
| EN ISO 17879:2017 | Gas cylinders - Self-closing cylinder valves - Specification and type testing (ISO 17879:2017) |
| UNI EN ISO 10524-3 : 2013 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| I.S. EN ISO 7866:2012 | GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING (ISO 7866:2012) |
| DIN EN ISO 10524-3:2013-06 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES (ISO 10524-3:2005 + AMD 1:2013) |
| ISO 11119-4:2016 | Gas cylinders Refillable composite gas cylinders Design, construction and testing Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners |
| UNI EN ISO 7866 : 2012 | GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING |
| ISO 9809-4:2014 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa |
| ISO 6406:2005 | Gas cylinders Seamless steel gas cylinders Periodic inspection and testing |
| ISO 20703:2006 | Gas cylinders — Refillable welded aluminium-alloy cylinders — Design, construction and testing |
| DIN EN 12863:2006-02 | TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND MAINTENANCE OF DISSOLVED ACETYLENE CYLINDERS |
| DIN EN 1968:2005-12 | TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND TESTING OF SEAMLESS STEEL GAS CYLINDERS |
| DIN EN 12245:2012-03 | Transportable gas cylinders - Fully wrapped composite cylinders (includes Amendment A1:2011) |
| DIN EN 13110:2012-07 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
| DIN EN ISO 15245-1:2013-11 | Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2001 + Amd 1:2013) (includes Amendment A1:2013) |
| BS EN 12257:2002 | Transportable gas cylinders. Seamless, hoop-wrapped composite cylinders |
| PD ISO/TR 11364:2012 | Gas cylinders. Compilation of national and international valve stem/gas cylinder neck threads and their identification and marking system |
| UNE-EN 13953:2015 | LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG) |
| UNE-EN ISO 10462:2014 | Gas cylinders - Acetylene cylinders - Periodic inspection and maintenance (ISO 10462:2013) |
| I.S. EN 1802:2002 | TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND TESTING OF SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS |
| I.S. EN 1803:2002 | TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND TESTING OF WELDED CARBON STEEL GAS CYLINDERS |
| EN 14189:2003 | Transportable gas cylinders - Inspection and maintenance of cylinder valves at time of periodic inspection of gas cylinders |
| ONORM EN ISO 22434 : 2011 | TRANSPORTABLE GAS CYLINDERS - INSPECTION AND MAINTENANCE OF CYLINDER VALVES |
| UNI EN 12245 : 2011 | TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS |
| UNI EN 12862 : 2002 | TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE WELDED ALUMINIUM ALLOY GAS CYLINDERS |
| UNI EN ISO 22435 : 2013 | GAS CYLINDERS - CYLINDER VALVES WITH INTEGRATED PRESSURE REGULATORS - SPECIFICATION AND TYPE TESTING |
| PREN 144-1 : DRAFT 2016 | RESPIRATORY PROTECTIVE DEVICES - GAS CYLINDER VALVES - PART 1: INLET CONNECTIONS |
| 02/712665 DC : DRAFT OCT 2002 | ISO 6406 - SEAMLESS STEEL GAS CYLINDERS - PERIODIC INSPECTION AND TESTING |
| DIN EN ISO 22434:2011-05 | Transportable gas cylinders - Inspection and maintenance of cylinder valves (ISO 22434:2006) |
| 17/30342698 DC : DRAFT SEP 2017 | BS EN ISO 10460 - GAS CYLINDERS - WELDED ALUMINIUM-ALLOY, CARBON AND STAINLESS STEEL GAS CYLINDERS - PERIODIC INSPECTION AND TESTING |
| ASTM D 1998 : 2015 : REDLINE | Standard Specification for Polyethylene Upright Storage Tanks |
| 11/30204154 DC : 0 | BS EN ISO 13293 - RECREATIONAL DIVING SERVICES - REQUIREMENTS FOR GAS BLENDER TRAINING PROGRAMMES |
| BS ISO 22434 : 2006 | TRANSPORTABLE GAS CYLINDERS - INSPECTION AND MAINTENANCE OF CYLINDER VALVES |
| BS ISO 20703:2006 | Gas cylinders. Refillable welded aluminium-alloy cylinders. Design, construction and testing |
| 10/30196135 DC : 0 | BS ISO 11515 - GAS CYLINDERS - REFILABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING |
| BS EN ISO 13293:2012 | Recreational diving services. Requirements for gas blender training programmes |
| 12/30230931 DC : 0 | BS EN ISO 11623 - GAS CYLINDERS - COMPOSITE CONSTRUCTION - PERIODIC INSPECTION AND TESTING |
| BS EN ISO 17879:2017 | Gas cylinders. Self-closing cylinder valves. Specification and type testing |
| CGA G 4.10 : 2017 | USE OF NONMETALLIC MATERIALS IN HIGH PRESSURE OXYGEN BREATHING GAS APPLICATIONS |
| DIN EN 14638-3:2012-06 | Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods (includes Corrigendum AC:2012) |
| BS ISO 9809-4:2014 | Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Stainless steel cylinders with an Rm value of less than 1 100 MPa |
| UNI EN ISO 10462 : 2014 | GAS CYLINDERS - ACETYLENE CYLINDERS - PERIODIC INSPECTION AND MAINTENANCE |
| DIN EN ISO 9809-1:2010-10 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
| UNI EN 14638-3 : 2010 | TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED RECEPTACLES OF A CAPACITY NOT EXCEEDING 150 LITRES - PART 3: WELDED CARBON STEEL CYLINDERS MADE TO A DESIGN JUSTIFIED BY EXPERIMENTAL METHODS |
| I.S. EN ISO 15245-1:2002 | GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION (ISO 15245-1:2001) |
| BS EN ISO 10524-3 : 2006 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| PREN ISO 11623 : DRAFT 2012 | GAS CYLINDERS - COMPOSITE CONSTRUCTION - PERIODIC INSPECTION AND TESTING (ISO/DIS 11623:2012) |
| BS EN ISO 10462:2013 | Gas cylinders. Acetylene cylinders. Periodic inspection and maintenance |
| ISO 11515:2013 | Gas cylinders — Refillable composite reinforced tubes of water capacity between 450 L and 3000 L — Design, construction and testing |
| DIN EN 13953:2015-05 | LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG) |
| ISO 10297:2014 | Gas cylinders — Cylinder valves — Specification and type testing |
| BS EN 14189:2003 | Transportable gas cylinders. Inspection and maintenance of cylinder valves at time of periodic inspection of gas cylinders |
| UNE-EN ISO 10297:2015 | Gas cylinders - Cylinder valves - Specification and type testing (ISO 10297:2014, Corrected version 2014-11-01) |
| BS EN ISO 22435 : 2007 | GAS CYLINDERS - CYLINDER VALVES WITH INTEGRATED PRESSURE REGULATORS - SPECIFICATION AND TYPE TESTING |
| ISO 22434:2006 | Transportable gas cylinders Inspection and maintenance of cylinder valves |
| BS EN 1964-1:2000 | Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres Cylinders made of seamless steel with an <i>R</i><sub>m</sub> value of less than 1100 MPa |
| ISO 9809-2:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa |
| BS EN 14876:2007 | Transportable gas cylinders. Periodic inspection and testing of welded steel pressure drums |
| BS EN 14638-1:2006 | Transportable gas cylinders. Refillable welded receptacles of a capacity not exceeding 150 litres Welded austenitic stainless steel cylinders made to a design justified by experimental methods |
| ISO/TR 11364:2012 | Gas cylinders Compilation of national and international valve stem/gas cylinder neck threads and their identification and marking system |
| BS EN 1964-3:2000 | Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres Cylinders made of seamless stainless steel with an <i>R</i><sub>m</sub> value of less than 1 100 MPa |
| ISO 7866:2012 | Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing |
| ISO 10462:2013 | Gas cylinders — Acetylene cylinders — Periodic inspection and maintenance |
| ISO 9809-3:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 3: Normalized steel cylinders |
| ISO 9809-1:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa |
| UNE-EN 13110:2012 | LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction |
| UNE-EN 12245:2009 | Transportable gas cylinders - Fully wrapped composite cylinders |
| BS EN 13953:2015 | LPG equipment and accessories. Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG) |
| BS EN ISO 10297 : 2014 | GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING |
| UNE-EN 13110:2012+A1:2017 | LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction |
| ISO 13293:2012 | Recreational diving services — Requirements for gas blender training programmes |
| UNE-EN ISO 7866:2013 | Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing (ISO 7866:2012) |
| ISO 22435:2007 | Gas cylinders — Cylinder valves with integrated pressure regulators — Specification and type testing |
| BS EN 1802:2002 | Transportable gas cylinders. Periodic inspection and testing of seamless aluminium alloy gas cylinders |
| BS EN 1803:2002 | Transportable gas cylinders. Periodic inspection and testing of welded carbon steel gas cylinders |
| EN 1803:2002 | Transportable gas cylinders - Periodic inspection and testing of welded carbon steel gas cylinders |
| EN 14638-1:2006 | Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 1: Welded austenitic stainless steel cylinders made to a design justified by experimental methods |
| EN ISO 13293:2012 | Recreational diving services - Requirements for gas blender training programmes (ISO 13293:2012) |
| EN ISO 9809-1:2010 | Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa (ISO 9809-1:2010) |
| EN 738-3:1998/A1:2002 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| EN ISO 9809-3:2010 | Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 3: Normalized steel cylinders (ISO 9809-3:2010) |
| EN 1802:2002 | Transportable gas cylinders - Periodic inspection and testing of seamless aluminium alloy gas cylinders |
| EN ISO 9809-2:2010 | Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa (ISO 9809-2:2010) |
| EN 14876:2007 | Transportable gas cylinders - Periodic inspection and testing of welded steel pressure drums |
| EN ISO 22434:2011 | Transportable gas cylinders - Inspection and maintenance of cylinder valves (ISO 22434:2006) |
| EN 12245:2009+A1:2011 | Transportable gas cylinders - Fully wrapped composite cylinders |
| EN ISO 11623:2015 | Gas cylinders - Composite construction - Periodic inspection and testing (ISO 11623:2015, Corrected version 2017-02) |
| 04/30107772 DC : DRAFT JAN 2004 | PREN 14876 - TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND TESTING OF WELDED STEEL PRESSURE DRUMS |
| CSA Z10524-3 : 2012 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| 16/30338531 DC : 0 | BS EN 144-1 - RESPIRATORY PROTECTIVE DEVICES - GAS CYLINDER VALVES - PART 1: INLET CONNECTIONS |
| I.S. EN ISO 9809-1:2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
| 03/116565 DC : DRAFT OCT 2003 | ISO 20703 - GAS CYLINDERS - REFILLABLE WELDED ALUMINIUM ALLOY - DESIGN, CONSTRUCTION AND TESTING |
| 18/30321883 DC : 0 | BS EN ISO 15995 - GAS CYLINDERS - SPECIFICATIONS AND TESTING OF LPG CYLINDER VALVES - MANUALLY OPERATED |
| ONORM EN ISO 7866 : 2014 | GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING (ISO 7866:2012 + COR 1:2014) |
| DIN EN ISO 9809-2:2010-10 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
| UNE-EN 14638-3:2011 | Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods |
| BS ISO 11515 : 2013 | GAS CYLINDERS - REFILLABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 450 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING |
| 02/711150 DC : DRAFT SEP 2002 | ISO/DIS 10460 - GAS CYLINDERS - WELDED CARBON STEEL GAS CYLINDERS - PERIODIC INSPECTION AND TESTING |
| NF EN ISO 22434 : 2011 | TRANSPORTABLE GAS CYLINDERS - INSPECTION AND MAINTENANCE OF CYLINDER VALVES |
| 05/30131633 DC : DRAFT APR 2005 | ISO 22435 - GAS CYLINDERS - CYLINDER VALVES WITH INTEGRATED PRESSURE REGULATOR - SPECIFICATION AND TYPE TESTING |
| UNI EN ISO 9809-2 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
| UNI EN ISO 13293 : 2013 | RECREATIONAL DIVING SERVICES - REQUIREMENTS FOR GAS BLENDER TRAINING PROGRAMMES |
| I.S. EN ISO 13293:2012 | RECREATIONAL DIVING SERVICES - REQUIREMENTS FOR GAS BLENDER TRAINING PROGRAMMES (ISO 13293:2012) |
| ISO 10464:2004 | Gas cylinders — Refillable welded steel cylinders for liquefied petroleum gas (LPG) — Periodic inspection and testing |
| UNE-EN ISO 22434:2011 | Transportable gas cylinders - Inspection and maintenance of cylinder valves (ISO 22434:2006) |
| I.S. EN ISO 22434:2011 | TRANSPORTABLE GAS CYLINDERS - INSPECTION AND MAINTENANCE OF CYLINDER VALVES |
| ONORM EN ISO 10462 : 2014 | GAS CYLINDERS - ACETYLENE CYLINDERS - PERIODIC INSPECTION AND MAINTENANCE (ISO 10462:2013) |
| UNE-EN ISO 11623:2016 | Gas cylinders - Composite construction - Periodic inspection and testing (ISO 11623:2015, Corrected version 2017-02) |
| ISO 11623:2015 | Gas cylinders — Composite construction — Periodic inspection and testing |
| BS EN 13293:2002 | Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless normalized carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1 litre for carbon dioxide |
| BS EN 13110 : 2012 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
| EN 12257:2002 | Transportable gas cylinders - Seamless, hoop-wrapped composite cylinders |
| DIN EN 14876:2007-04 | Transportable gas cylinders - Periodic inspection and testing of welded steel pressure drums |
| EN 13293:2002 | Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless normalized carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1 litre for carbon dioxide |
| DIN EN 14638-1:2006-07 | Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 1: Welded austenitic stainless steel cylinders made to a design justified by experimental methods |
| I.S. EN ISO 22435:2007 | GAS CYLINDERS - CYLINDER VALVES WITH INTEGRATED PRESSURE REGULATORS - SPECIFICATION AND TYPE TESTING (ISO 22435:2007) |
| ONORM EN ISO 22435 : 2013 | GAS CYLINDERS - CYLINDER VALVES WITH INTEGRATED PRESSURE REGULATORS - SPECIFICATION AND TYPE TESTING (ISO 22435:2007+AMD 1:2012) |
| AS 2337.3:2020 | Gas cylinder test stations Transportable gas cylinders - Periodic inspection and testing of composite cylinders (ISO 11623:2015, MOD) |
| ISO 11119-2:2012 | Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners |
| ISO 14245:2006 | Gas cylinders Specifications and testing of LPG cylinder valves Self-closing |
| ISO 10920:1997 | Gas cylinders — 25E taper thread for connection of valves to gas cylinders — Specification |
| ISO/TR 11364:2012 | Gas cylinders Compilation of national and international valve stem/gas cylinder neck threads and their identification and marking system |
| ISO 11363-1:2010 | Gas cylinders 17E and 25E taper threads for connection of valves to gas cylinders Part 1: Specifications |
| ISO 15245-1:2001 | Gas cylinders Parallel threads for connection of valves to gas cylinders Part 1: Specification |
| ISO 10297:2014 | Gas cylinders — Cylinder valves — Specification and type testing |
| ISO 11114-2:2013 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 2: Non-metallic materials |
| ISO 15995:2006 | Gas cylinders Specifications and testing of LPG cylinder valves Manually operated |
| ISO 22434:2006 | Transportable gas cylinders Inspection and maintenance of cylinder valves |
| ISO 13769:2007 | Gas cylinders Stamp marking |
| ISO 11119-3:2013 | Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.