ISO 128:1982
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Technical drawings — General principles of presentation
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
02-22-2019
Superseded by
ISO 128-24:1999
ISO 128-40:2001
ISO 128-20:1996
ISO 128-21:1997
ISO 128-22:1999
ISO 128-23:1999
ISO 128-24:2014
ISO 128-25:1999
ISO 128-34:2001
ISO 128-44:2001
ISO 128-1:2003
ISO 128-30:2001
ISO 128-50:2001
Language(s)
English, French
Published date
07-01-1982
Important note : All end users must be registered with an Account prior to user licenses being assigned.| DocumentType |
Standard
|
| Pages |
15
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| BS 308-1:1993 | Similar to |
| DIN 5-10:1986-12 | Similar to |
| NFP 02 001 : 1985 | Similar to |
| NFE 04 520 : 1984 | Similar to |
| UNE 1032:1982 | Identical |
| NBN E 04 001 : 1981 | Identical |
| NBN E 04 006 : 1981 | Identical |
| NBN E 04 008 : 1981 | Identical |
| NS 8302 : 1ED 1983 | Similar to |
| NS 8304 : 1ED 1983 | Similar to |
| NS 1404 : 3ED 84 | Identical |
| AS 1100.201-1992 | Identical |
| AS 1100.101-1992 | Identical |
| BIS IS 10714 : 1983 | Identical |
| BS ISO 128:1982 | Identical |
| DIN 15-1:1984-06 | Similar to |
| DIN 201:1990-05 | Similar to |
| DIN 406-2:1981-08 | Similar to |
| AS 1100.101-1984 | Identical |
| DIN 6-2:1986-12 | Identical |
| DIN 6-1:1986-12 | Identical |
| DIN 15-2:1984-06 | Similar to |
| BS 308-1:1984 | Similar to |
| 00/712314 DC : DRAFT AUG 2000 | BS EN ISO 8205-2 WATER-COOLED SECONDARY CONNECTION CABLES FOR RESISTANCE WELDING - PART 2: DIMENSIONS AND REQUIREMENTS FOR SINGLE-CONDUCTOR CONNECTION CABLES |
| DIN ISO 6410-2:1993-12 | TECHNICAL DRAWINGS - SCREW THREADS AND THREADED PARTS - SCREW THREAD INSERTS |
| BS 308-1.10(1996) : 1996 | TECHNICAL DRAWINGS - SCREW THREADS AND THREADED PARTS - GENERAL CONVENTIONS |
| BS 2774(1983) : 1983 AMD 8620 | SPECIFICATION FOR DRAWING CONVENTIONS FOR LABORATORY GLASS APPARATUS |
| DIN ISO 6414:1984-02 | TECHNICAL DRAWINGS FOR GLASSWARE |
| DIN ISO 5459:1982-01 | TECHNICAL DRAWINGS; GEOMETRICAL TOLERANCING; DATUMS AND DATUM SYSTEMS FOR GEOMETRICAL TOLERANCES |
| BS A 294:1984 | Specification for spline drive wrenching configuration. Metric series |
| DIN ISO 5456-2:1998-04 | Technical drawings - Projection methods - Part 2: Orthographic representations (ISO 5456-2:1996) |
| BS 308-1.13(1997) : 1997 | TECHNICAL DRAWINGS - ROLLER BEARINGS - DETAILED SIMPLIFIED REPRESENTATION |
| I.S. EN 61248-2:1998 | TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - PART 2: SECTIONAL SPECIFICATION FOR SIGNAL TRANSFORMERS ON THE BASIS OF THE CAPABILITY APPROVAL PROCEDURE |
| ISO 4069:1977 | Building and civil engineering drawings — Representation of areas on sections and views — General principles |
| CEI UNI EN 45510-5-4 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-4: HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES |
| ISO 7994:1985 | Aerospace Internal drive, offset cruciform recess (Torq-Set) for rotary fastening devices Metric series |
| I.S. EN 61248-5:1998 | TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - PART 5: SECTIONAL SPECIFICATION FOR PULSE TRANSFORMERS ON THE BASIS OF THE CAPABILITY APPROVAL PROCEDURE |
| I.S. EN ISO 5456-2:1999 | TECHNICAL DRAWINGS - PROJECTION METHODS - PART 2: ORTHOGRAPHIC REPRESENTATIONS (ISO 5456-2:1996) |
| I.S. EN 61248-7:1998 | TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - PART 7: SECTIONAL SPECIFICATION FOR HIGH-FREQUENCY INDUCTORS AND INTERMEDIATE FREQUENCY TRANSFORMERS ON THE BASIS OF THE CAPABILITY APPROVAL PROCEDURE |
| I.S. EN ISO 8560:1999 | TECHNICAL DRAWINGS - CONSTRUCTION DRAWINGS - REPRESENTATION OF MODULAR SIZES, LINES AND GRIDS |
| ISO 6414:1982 | Technical drawings for glassware |
| BS EN ISO 6411:1997 | Technical drawings. Simplified representation of centre holes |
| BS EN 45510-5-1:1998 | Guide for the procurement of power station equipment Steam turbines |
| BS EN ISO 5261:1999 | Technical drawings. Simplified representation of bars and profile sections |
| EN 45510-5-2 : 1998 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-2: GAS TURBINES |
| EN 45510-5-4:1998 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-4: HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES |
| EN 61248-2:1997 | Transformers and inductors for use in electronic and telecommunication equipment - Part 2: Sectional specification for signal transformers on the basis of the capability approval procedure |
| EN ISO 7519:1996 | Technical drawings - Construction drawings - General principles of presentation for general arrangement and assembly drawings (ISO 7519:1991) |
| EN 61248-4:1997 | Transformers and inductors for use in electronic and telecommunication equipment - Part 4: Sectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability approval procedure |
| EN ISO 7518:1999 | Technical drawings - Construction drawings - Simplified representation of demolition and rebuilding (ISO 7518:1983) |
| EN 186180 : 1994 | Sectional Specification: Connector sets for optical fibres and cables - Type LSB |
| EN 186220:1993 | Sectional Specification: Connector sets for optical fibres and cables - Type LSC |
| EN 186270:1997 | Sectional Specification: Connector sets for optical fibres and cables - Type LSH |
| 11/30050625 DC : 0 | BS EN ISO 2553 - WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED, BRAZED AND SOLDERED JOINTS |
| ISO 5261:1995 | Technical drawings — Simplified representation of bars and profile sections |
| I.S. EN ISO 3098-0:1998 | TECHNICAL PRODUCT DOCUMENTATION - LETTERING - GENERAL REQUIREMENTS |
| ISO/TR 18569:2004 | Safety of machinery Guidelines for the understanding and use of safety of machinery standards |
| BS 308-1.23(1997) : 1997 | TECHNICAL DRAWINGS - SIMPLIFIED REPRESENTATION OF CENTRE HOLES |
| BS EN 61248-6:1997 | Transformers and inductors for use in electronic and telecommunication equipment Sectional specification for inductors on the basis of the capability approval procedure |
| BS EN 186270:1998 | Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type LSH |
| BS 308-1.11(1996) : 1996 | TECHNICAL DRAWINGS - SCREW THREADS AND THREADED PARTS - SCREW THREAD INSERTS |
| NF ISO 13584-31 : 2004 | INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PARTS LIBRARY - PART 31: IMPLEMENTATION RESOURCES: GEOMETRIC PROGRAMMING INTERFACE |
| BS EN 186230:1996 | Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type LSF |
| CEI UNI EN 45510-5-3 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-3: WIND TURBINES |
| 03/301396 DC : 0 | EN 14607-3 - SPACE ENGINEERING - MECHANICAL - PART 3: MECHANISMS |
| ISO 8048:1984 | Technical drawings Construction drawings Representation of views, sections and cuts |
| ISO 13584-31:1999 | Industrial automation systems and integration Parts library Part 31: Implementation resources: Geometric programming interface |
| ISO 8560:1986 | Technical drawings Construction drawings Representation of modular sizes, lines and grids |
| I.S. EN 61248-3:1998 | TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - PART 3: SECTIONAL SPECIFICATION FOR POWER TRANSFORMERS ON THE BASIS OF THE CAPABILITY APPROVAL PROCEDURE |
| I.S. EN 61248-4:1998 | TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - PART 4: SECTIONAL SPECIFICATION FOR POWER TRANSFORMERS FOR SWITCHED MODE POWER SUPPLIES (SMPS) ON THE BASIS OF THE CAPABILITY APPROVAL PROCEDURE |
| ISO 5845-2:1995 | Technical drawings Simplified representation of the assembly of parts with fasteners Part 2: Rivets for aerospace equipment |
| BS EN ISO 7518:1999 | Construction drawings. Simplified representation of demolition and rebuilding |
| DIN EN 22553:1997-03 | WELDED, BRAZED AND SOLDERED JOINTS - SYMBOLIC REPRESENTATION ON DRAWINGS |
| DIN EN ISO 10628:2001-03 | FLOW DIAGRAMS FOR PROCESS PLANTS - GENERAL RULES |
| BS 308-2:1985 | Engineering drawing practice Recommendations for dimensioning and tolerancing of size |
| BS 308-3:1990 | Engineering drawing practice Recommendations for geometrical tolerancing |
| DIN ISO 6411:1997-11 | TECHNICAL DRAWINGS - SIMPLIFIED REPRESENTATION OF CENTRE HOLES |
| CEI EN 186270 : 1998 | SECTIONAL SPECIFICATION: CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES - TYPE LSH |
| BS ISO 7200:1984 | Technical drawing. Title blocks |
| DIN ISO 6412-1:1991-05 | TECHNICAL DRAWINGS - SIMPLIFIED REPRESENTATION OF PIPELINES - GENERAL RULES AND ORTHOGONAL REPRESENTATION |
| I.S. EN 14607-1:2004 | SPACE ENGINEERING - MECHANICAL - PART 1: THERMAL CONTROL |
| DIN ISO 4095:1980-12 | AEROSPACE; FASTENERS FOR AEROSPACE CONSTRUCTION, BI HEXAGONAL WRENCHING CONFIGURATION |
| CEI UNI EN 45510-5-2 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-2: GAS TURBINES |
| DIN 15-2:1984-06 | TECHNICAL DRAWINGS - LINES - GENERAL APPLICATION |
| BS EN 186220:1996 | Harmonized system of quality assessment for electronic components. Sectional specification: Connector sets for optical fibres and cables. Type LSC |
| BS ISO 5459:1981 | Technical drawings. Geometrical tolerancing. Datums and datum-systems for geometrical tolerances |
| BS 2917-1:1993 | Graphic symbols and circuit diagrams for fluid power systems and components. Specification for graphic symbols |
| DIN ISO 5456-3:1998-04 | TECHNICAL DRAWINGS - PROJECTIONS METHODS - PART 3: AXONOMETRIC REPRESENTATIONS |
| BS 3939-2:1985 | Graphical symbols for electrical power, telecommunications and electronics diagrams Symbol elements, qualifying symbols and other symbols having general application |
| I.S. EN 186270:1998 | CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES - TYPE LSH (SECTIONAL SPECIFICATION) |
| CSA B78.5 : 93(R2000) | COMPUTER-AIDED DESIGN DRAFTING (BUILDINGS) |
| DIN ISO 1219-1:2007-12 | FLUID POWER SYSTEMS AND COMPONENTS - GRAPHIC SYMBOLS AND CIRCUIT DIAGRAMS - PART 1: GRAPHIC SYMBOLS FOR CONVENTIONAL USE AND DATA-PROCESSING APPLICATIONS |
| ISO 11142:2005 | Micrographics Colour microfilm Application of the exposure technique to prepare line originals and continuous-tone originals |
| BS EN 1861:1998 | Refrigerating systems and heat pumps. System flow diagrams and piping and instrument diagrams. Layout and symbols |
| ISO 6410-2:1993 | Technical drawings — Screw threads and threaded parts — Part 2: Screw thread inserts |
| ISO 5845-1:1995 | Technical drawings Simplified representation of the assembly of parts with fasteners Part 1: General principles |
| ISO 6410-1:1993 | Technical drawings — Screw threads and threaded parts — Part 1: General conventions |
| ISO 9431:1990 | Construction drawings — Spaces for drawing and for text, and title blocks on drawing sheets |
| BS EN ISO 8826-2:1997 | Technical drawings. Roller bearings Detailed simplified representation |
| EN ISO 6410-1:1996 | Technical drawings - Screw threads and threaded parts - Part 1: General conventions (ISO 6410-1:1993) |
| EN ISO 6411:1997 | Technical drawings - Simplified representation of centre holes (ISO 6411:1982) |
| EN 186230:1993 | Sectional Specification: Connector sets for optical fibres and cables - Type LSF |
| EN 45510-5-1:1998 | Guide for procurement of power station equipment - Part 5-1: Steam turbines |
| EN 45510-5-4:1998 | Guide for procurement of power station equipment - Part 5-4: Hydraulic turbines, storage pumps and pump-turbines |
| EN 45510-5-2:1998 | Guide for procurement of power station equipment - Part 5-2: Gas turbines |
| DIN 19227-1:1993-10 | CONTROL TECHNOLOGY - GRAPHICAL SYMBOLS AND IDENTIFYING LETTERS FOR PROCESS CONTROL ENGINEERING - SYMBOLIC REPRESENTATION FOR FUNCTIONS |
| DIN ISO 5845-2:1997-04 | TECHNICAL DRAWINGS - SIMPLIFIED REPRESENTATION OF THE ASSEMBLY OF PARTS WITH FASTENERS - PART 2: RIVETS FOR AEROSPACE EQUIPMENT |
| 04/30086896 DC : DRAFT JUN 2004 | ISO 10110-1 - OPTICS AND OPTICAL INSTRUMENTS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 1: GENERAL |
| UNI ISO 1219-1 : 1994 | FLUID POWER SYSTEMS AND COMPONENTS - GRAPHIC SYMBOLS AND CIRCUIT DIAGRAMS - GRAPHIC SYMBOLS |
| DIN ISO 1101:1985-03 | TECHNICAL DRAWINGS, GEOMETRICAL TOLERANCING, TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUNOUT - GENERALITIES, DEFINITIONS, SYMBOLS ON DRAWINGS |
| DIN ISO 6433:1982-09 | TECHNICAL DRAWINGS - ITEM REFERENCES |
| BS EN 61248-3:1997 | Transformers and inductors for use in electronic and telecommunication equipment Sectional specification for power transformers on the basis of the capability approval procedure |
| CEI UNI EN 45510-5-1 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-1: STEAM TURBINES |
| 03/301394 DC : DRAFT JAN 2003 | EN 14607-1 - SPACE ENGINEERING - MECHANICAL - PART 1: THERMAL CONTROL |
| BS EN 61248-2:1997 | Transformers and inductors for use in electronic and telecommunication equipment Sectional specification for signal transformers on the basis of the capability approval procedure |
| BS ISO 16792:2006 | Technical product documentation. Digital product definition data practices |
| DIN ISO 6410-1:1993-12 | TECHNICAL DRAWINGS - SCREW THREADS AND THREADED PARTS - GENERAL CONVENTIONS |
| I.S. EN 186180:1995 | CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES - TYPE LSB (SECTIONAL SPECIFICATION) |
| ISO 6413:1988 | Technical drawings Representation of splines and serrations |
| NFL 07-115/1 : 97 XP | AEROSPACE SERIES - RULES FOR THE REPRESENTATION OF ITEMS MADE OF COMPOSITE MATERIALS - GENERAL |
| EN ISO 6413:1994 | Technical drawings - Representation of splines and serrations (ISO 6413:1988) |
| I.S. EN ISO 6413:1995 | TECHNICAL DRAWINGS - REPRESENTATION OF SPLINES AND SERRATIONS |
| EN ISO 6414:1994 | Technical drawings for glassware (ISO 6414:1982) |
| I.S. EN ISO 6414:1995 | TECHNICAL DRAWINGS FOR GLASSWARE |
| BS EN 22553:1995 | Welded, brazed and soldered joints. Symbolic representation on drawings |
| BS EN 14607-1:2004 | Space engineering. Mechanical Thermal control |
| BS EN ISO 6410-2:1996 | Technical drawings. Screw threads and threaded parts Screw thread inserts |
| IEC 61248-6:1996 | Transformers and inductors for use in electronic andtelecommunication equipment - Part 6: Sectional specification forinductors on the basis of the capability approval procedure |
| BS EN ISO 6428:1999 | Technical drawings. Requirements for microcopying |
| ISO 6411:1982 | Technical drawings — Simplified representation of centre holes |
| BS EN ISO 5456-1:1999 | Technical drawings. Projection methods Synopsis |
| BS EN 45510-5-2:1998 | Guide for the procurement of power station equipment Gas turbines |
| BS EN 45510-5-3:1998 | Guide for the procurement of power station equipment Wind turbines |
| BS EN ISO 5456-2:1999 | Technical drawings. Projection methods Orthographic representations |
| BS EN ISO 7519:1997 | Technical drawings. Construction drawings. General principles of presentation for general arrangement and assembly drawings |
| BS EN ISO 7437:1996 | Technical drawings. Construction drawings. General rules for execution of production drawings for prefabricated structural components |
| BS EN ISO 10628:2001 | Flow diagrams for process plants. General rules |
| ISO 129:1985 | Technical drawings Dimensioning General principles, definitions, methods of execution and special indications |
| ISO 6428:1982 | Technical drawings — Requirements for microcopying |
| ISO 7519:1991 | Technical drawings — Construction drawings — General principles of presentation for general arrangement and assembly drawings |
| ISO 11091:1994 | Construction drawings Landscape drawing practice |
| BS EN ISO 5845-1:1999 | Technical drawings. Simplified representation of the assemby of parts with fasteners General principles |
| ISO 8826-2:1994 | Technical drawings — Rolling bearings — Part 2: Detailed simplified representation |
| ISO 5456-3:1996 | Technical drawings — Projection methods — Part 3: Axonometric representations |
| IEC 61248-5:1996 | Transformers and inductors for use in electronic andtelecommunication equipment - Part 5: Sectional specification forpulse transformers on the basis of the capability approvalprocedure |
| ISO 7437:1990 | Technical drawings — Construction drawings — General rules for execution of production drawings for prefabricated structural components |
| IEC 61248-3:1996 | Transformers and inductors for use in electronic andtelecommunication equipment - Part 3: Sectional specification forpower transformers on the basis of the capability approvalprocedure |
| IEC 61248-4:1996 | Transformers and inductors for use in electronic andtelecommunication equipment - Part 4: Sectional specification forpower transformers for switched mode power supplies (SMPS) on thebasis of the capability approval procedure |
| ISO 8826-1:1989 | Technical drawings — Rolling bearings — Part 1: General simplified representation |
| BS EN ISO 11091:1999 | Construction drawings. Landscape drawing practice |
| ISO 7518:1983 | Technical drawings — Construction drawings — Simplified representation of demolition and rebuilding |
| BS EN ISO 5456-3:1999 | Technical drawings. Projection methods Axonometric representations |
| IEC 61248-2:1996 | Transformers and inductors for use in electronic andtelecommunication equipment - Part 2: Sectional specification forsignal transformers on the basis of the capability approvalprocedure |
| EN ISO 5456-1:1999 | Technical drawings - Projection methods - Part 1: Synopsis (ISO 5456-1:1996) |
| EN ISO 4172:1996 | Technical drawings - Construction drawings - Drawings for the assembly of prefabricated structures (ISO 4172:1991) |
| EN ISO 10628:2000 | Flow diagrams for process plants - General rules (ISO 10628:2000) |
| EN 14607-1:2004 | Space engineering - Mechanical - Part 1: Thermal control |
| EN ISO 5456-3:1999 | Technical drawings - Projection methods - Part 3: Axonometric representations (ISO 5456-3:1996) |
| EN ISO 5456-2:1999 | Technical drawings - Projection methods - Part 2: Orthographic representations (ISO 5456-2:1996) |
| EN ISO 9222-1:1995 | Technical drawings - Seals for dynamic application - Part 1: General simplified representation (ISO 9222-1:1989) |
| EN ISO 8826-1:1995 | Technical drawings - Rolling bearings - Part 1: General simplified representation (ISO 8826-1:1989) |
| EN ISO 7437:1996 | Technical drawings - Construction drawings - General rules for execution of production drawings for prefabricated structural components (ISO 7437:1990) |
| EN ISO 3098-0:1997 | Technical product documentation - Lettering - Part 0: General requirements (ISO 3098-0:1997) |
| EN ISO 6428:1999 | Technical drawings - Requirements for microcopying (ISO 6428:1982) |
| EN 22553:1994 | Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992) |
| EN ISO 9431:1999 | Construction drawings - Spaces for drawing and for text, and title blocks on drawing sheets (ISO 9431:1990) |
| EN ISO 6410-2 : 1996 | TECHNICAL DRAWINGS - SCREW THREADS AND THREADED PARTS - SCREW THREAD INSERTS (ISO 6410-2:1993) |
| EN ISO 5261:1999 | Technical drawings - Simplified representation of bars and profile sections (ISO 5261:1995) |
| EN ISO 8826-2:1997 | Technical drawings - Rolling bearings - Part 2: Detailed simplified representation (ISO 8826-2:1994) |
| EN ISO 11091:1999 | Construction drawings - Landscape drawing practice (ISO 11091:1994) |
| EN ISO 5845-1:1999 | Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 1: General principles (ISO 5845-1:1995) |
| DIN 40900-2:1988-03 | GRAPHICAL SYMBOLS FOR DIAGRAMS; SYMBOL ELEMENTS & QUALIFYING SYMBOLS FOR GRAPHICAL SYMBOLS |
| DIN ISO 3461-2:1988-03 | GRAPHICAL SYMBOLS - GENERAL PRINCIPLES FOR THE CREATION OF GRAPHICAL SYMBOLS - GRAPHICAL SYMBOLS FOR USE IN TECHNICAL PRODUCT DOCUMENTATION |
| I.S. EN 186220:1994 | CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES - TYPE LSC (SECTIONAL SPECIFICATION) |
| 15/30284718 DC : 0 | BS ISO 10110-9 - OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 9: SURFACE TREATMENT AND COATING |
| I.S. EN ISO 10628:2001 | FLOW DIAGRAMS FOR PROCESS PLANTS - GENERAL RULES |
| 00/712313 DC : DRAFT AUG 2000 | BS EN ISO 8205-1 WATER-COOLED SECONDARY CONNECTION CABLES FOR RESISTANCE WELDING - PART 1: DIMENSIONS AND REQUIREMENTS FOR DOUBLE-CONDUCTOR CONNECTION CABLES |
| DIN ISO 5845-1:1997-04 | TECHNICAL DRAWINGS - SIMPLIFIED REPRESENTATION OF THE ASSEMBLY OF PARTS WITH FASTENERS - PART 1: GENERAL PRINCIPLES |
| BS 308-4.8(1996) : 1996 | TECHNICAL DRAWINGS - SIMPLIFIED REPRESENTATION OF PIPELINES - TERMINAL FEATURES OF VENTILATION AND DRAINAGE SYSTEMS |
| BS EN 186300:1999 | Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables type MSC |
| BS ISO 129:1985 | Technical drawings. Dimensioning. General principles, definitions, methods of execution and special indications |
| BS EN 61248-7:1998 | Transformers and inductors for use in electronic and telecommunication equipment Sectional specification for high-frequency inductors and intermediate transformers on the basis of the capability approval procedure |
| BS EN 61248-4:1997 | Transformers and inductors for use in electronic and telecommunication equipment Sectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability approval procedure |
| BS EN ISO 8560:1999 | Construction drawings. Representation of modular sizes, lines and grids |
| I.S. EN 61248-6:1998 | TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - PART 6: SECTIONAL SPECIFICATION FOR INDUCTORS ON THE BASIS OF THE CAPABILITY APPROVAL PROCEDURE |
| EN ISO 8560:1999 | Technical drawings - Construction drawings - Representation of modular sizes, lines and grids (ISO 8560:1986) |
| NF EN 4408-001 : 2005 | AEROSPACE SERIES - TECHNICAL DRAWINGS - REPRESENTATION OF PARTS MADE OF COMPOSITE MATERIALS - PART 1: GENERAL RULES |
| BS EN ISO 4172:1997 | Technical drawings. Construction drawings. Drawings for the assembly of prefabricated structures |
| BS EN ISO 9431:1999 | Construction drawings. Spaces for drawing and for text, and title blocks on drawing sheets |
| ISO 9222-1:1989 | Technical drawings — Seals for dynamic application — Part 1: General simplified representation |
| ISO 10628:1997 | Flow diagrams for process plants General rules |
| PD ISO/TR 18569:2004 | Safety of machinery. Guidelines for the understanding and use of safety of machinery standards. |
| ISO 5456-2:1996 | Technical drawings — Projection methods — Part 2: Orthographic representations |
| ISO 5456-1:1996 | Technical drawings — Projection methods — Part 1: Synopsis |
| ISO 4172:1991 | Technical drawings — Construction drawings — Drawings for the assembly of prefabricated structures |
| BS EN ISO 6410-1:1996 | Technical drawings. Screw threads and threaded parts General conventions |
| EN 61248-7:1997 | Transformers and inductors for use in electronic and telecommunication equipment - Part 7: Sectional specification for high-frequency inductors and intermediate frequency transformers on the basis of the capability approval procedure |
| EN 61248-6:1997 | Transformers and inductors for use in electronic and telecommunication equipment - Part 6: Sectional specification for inductors on the basis of the capability approval procedure |
| EN 186130:1994 | Sectional Specification: Connector sets for optical fibres and cables - Type LSA |
| EN 45510-5-1 : 1998 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-1: STEAM TURBINES |
| EN 61248-3:1997 | Transformers and inductors for use in electronic and telecommunication equipment - Part 3: Sectional specification for power transformers on the basis of the capability approval procedure |
| EN 61248-5:1997 | Transformers and inductors for use in electronic and telecommunication equipment - Part 5: Sectional specification for pulse transformers on the basis of the capability approval procedure |
| I.S. EN ISO 4172:1997 | TECHNICAL DRAWINGS - CONSTRUCTION DRAWINGS - DRAWINGS FOR THE ASSEMBLY OF PREFABRICATED STRUCTURES |
| I.S. EN ISO 7519:1997 | TECHNICAL DRAWINGS - CONSTRUCTION DRAWINGS - GENERAL PRINCIPLES OF PRESENTATION FOR GENERAL ARRANGEMENT AND ASSEMBLY DRAWINGS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.