• Shopping Cart
    There are no items in your cart

ISO 11357-1:2016

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

02-17-2023

Superseded by

ISO 11357-1:2023

Language(s)

English, French

Published date

09-16-2016

US$81.00
Excluding Tax where applicable

ISO 11357-1:2016 specifies several differential scanning calorimetry (DSC) methods for the thermal analysis of polymers and polymer blends, such as

- thermoplastics (polymers, moulding compounds and other moulding materials, with or without fillers, fibres or reinforcements),

- thermosets (uncured or cured materials, with or without fillers, fibres or reinforcements), and

- elastomers (with or without fillers, fibres or reinforcements).

ISO 11357-1:2016 is intended for the observation and measurement of various properties of, and phenomena associated with, the above-mentioned materials, such as

- physical transitions (glass transition, phase transitions such as melting and crystallization, polymorphic transitions, etc.),

- chemical reactions (polymerization, crosslinking and curing of elastomers and thermosets, etc.),

- the stability to oxidation, and

- the heat capacity.

ISO 11357-1:2016 specifies a number of general aspects of differential scanning calorimetry, such as the principle and the apparatus, sampling, calibration and general aspects of the procedure and test report common to all following parts.

Details on performing specific methods are given in subsequent parts of ISO 11357 (see Foreword).

DevelopmentNote
Supersedes ISO/DIS 11357-1. (09/2016)
DocumentType
Standard
Pages
33
PublisherName
International Organization for Standardization
Status
Superseded
SupersededBy
Supersedes

ONORM EN ISO 11357-6 : 2013 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT) (ISO 11357-6:2008)
03/105582 DC : DRAFT APR 2003 ISO 11357-4 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY
BS EN ISO 11357-7:2015 Plastics. Differential scanning calorimetry (DSC) Part 7: Determination of crystallization kinetics
UNE-EN 16806-1:2016 Textiles and textile products - Textiles containing phase change materials (PCM) - Part 1: Determination of the heat storage and release capacity
12/30257998 DC : 0 BS ISO 11357-2 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT
I.S. EN ISO 11357-7:2015 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 7: DETERMINATION OF CRYSTALLIZATION KINETICS (ISO 11357-7:2015)
17/30350548 DC : 0 BS EN ISO 11357-6 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT)
NF ISO 11357-3 : 2011 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION
DIN EN ISO 11357-4 E : 2014 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY (ISO 11357-4:2014)
I.S. EN ISO 11357-5:2014 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 5: DETERMINATION OF CHARACTERISTIC REACTION-CURVE TEMPERATURES AND TIMES, ENTHALPY OF REACTION AND DEGREE OF CONVERSION (ISO 11357-5:2013)
ISO 15309:2013 Implants for surgery — Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and compounds for use in implantable medical devices
BS ISO 11357-4 : 2005 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY
DIN EN ISO 11357-6:2013-04 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT) (ISO 11357-6:2008)
16/30343609 DC : 0 BS ISO 22768 - RUBBER, RAW - DETERMINATION OF THE GLASS TRANSITION TEMPERATURE BY DIFFERENTIAL SCANNING CALORIMETRY (DSC)
12/30267658 DC : 0 BS EN ISO 21809-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 2: SINGLE LAYER FUSION BONDED EPOXY COATINGS
13/30258014 DC : 0 BS EN ISO 11358-1 - PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES (ISO/DIS 11358-1:2013)
I.S. EN ISO 11357-2:2014 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT (ISO 11357-2:2013)
BS ISO 22768:2017 Rubber, raw. Determination of the glass transition temperature by differential scanning calorimetry (DSC)
BS ISO 14322:2012 Plastics. Epoxy resins. Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry
SAE J 2642 : 2017 RECOMMENDED PRACTICE FOR DEVELOPING SPECIFICATIONS FOR AUTOMOTIVE THERMOPLASTIC MATERIALS
UNI EN 15860 : 2010 PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
ASTM D 6779 : 2017 : REDLINE Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)
S.R. CEN ISO/TR 11827:2016 TEXTILES - COMPOSITION TESTING - IDENTIFICATION OF FIBRES (ISO/TR 11827:2012)
BS EN ISO 13628-2:2006 Petroleum and natural gas industries. Design and operation of subsea production systems Unbonded flexible pipe systems for subsea and marine applications
BS EN ISO 16103:2005 Packaging. Transport packages for dangerous goods. Recycled plastics material
EN 61189-11 : 2013 TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 11: MEASUREMENT OF MELTING TEMPERATURE OR MELTING TEMPERATURE RANGES OF SOLDER ALLOYS
VDI 3405 Blatt 1.1:2017-08 (Draft) Additive manufacturing processes - Laser sintering of polymer parts - Qualification of materials
I.S. EN ISO 21809-3:2016 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016)
BS EN ISO 11357-5:2014 Plastics. Differential scanning calorimetry (DSC) Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
06/30130313 DC : DRAFT MAR 2006 ISO 23559 - PLASTICS - FILM AND SHEETING - GUIDE FOR THE TESTING OF THERMOPLASTIC FILMS
DIN EN ISO 11357-7:2015-12 Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics (ISO 11357-7:2015); German version EN ISO 11357-7:2015
12/30244084 DC : 0 BS ISO 15309 - IMPLANTS FOR SURGERY - DIFFERENTIAL SCANNING CALORIMETRY OF POLY ETHER ETHER KETONE (PEEK) POLYMERS AND COMPOUNDS FOR USE IN IMPLANTABLE MEDICAL DEVICES
ISO 14322:2012 Plastics Epoxy resins Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry
UNE-EN 62788-1-6:2017 Measurement procedures for materials used in photovoltaic modules - Part 1-6: Encapsulants - Test methods for determining the degree of cure in Ethylene-Vinyl Acetate
ONORM EN ISO 11357-4 : 2014 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY (ISO 11357-4:2014)
BS EN 61189-11:2013 Test methods for electrical materials, printed boards and other interconnection structures and assemblies Measurement of melting temperature or melting temperature ranges of solder alloys
BS ISO 15309:2013 Implants for surgery. Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and compounds for use in implantable medical devices
03/105579 DC : DRAFT APR 2003 ISO 17744 - PLASTICS - DETERMINATION OF SPECIFIC VOLUME AS A FUNCTION OF TEMPERATURE AND PRESSURE (PVT DIAGRAM) - PISTON APPARATUS METHOD
16/30321526 DC : 0 BS ISO 19935-1 - PLASTICS - TEMPERATURE MODULATED DSC - PART 1: GENERAL PRINCIPLES
BS ISO 28343:2010 Rubber compounding ingredients. Process oils. Determination of glass transition temperature by DSC
BS ISO 11357-3:1999 Plastics. Differential scanning calorimetry (DSC) Determination of temperature and enthalpy of melting and crystallization
07/30161721 DC : 0 BS ISO 11357-6 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT)
BS ISO 11357-6 : 2008 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT)
DIN EN ISO 11357-2:2014-07 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT (ISO 11357-2:2013)
I.S. EN ISO 11357-6:2013 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT) (ISO 11357-6:2018)
UNI EN ISO 11357-5 : 2014 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 5: DETERMINATION OF CHARACTERISTIC REACTION-CURVE TEMPERATURES AND TIMES, ENTHALPY OF REACTION AND DEGREE OF CONVERSION
PREN 15860 : DRAFT 2016 PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
ASTM F 2150 : 2013 : REDLINE Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products
EN 62788-1-6:2017 Measurement procedures for materials used in photovoltaic modules - Part 1-6: Encapsulants - Test methods for determining the degree of cure in Ethylene-Vinyl Acetate
ASTM D 4000 : 2016 : REDLINE Standard Classification System for Specifying Plastic Materials
EN ISO 11357-3:2018 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2018)
EN ISO 11357-6:2018 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2018)
I.S. EN ISO 13628-2:2006 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
I.S. EN ISO 21809-2:2014 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 2: SINGLE LAYER FUSION-BONDED EPOXY COATINGS (ISO 21809-2:2014)
EN ISO 11357-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2014)
VDI 3822 Blatt 2.1.8:2012-01 Failure analysis - Defects of thermoplastic products made of plastics caused by weather-induced stress
VDI 3405 Blatt 1:2013-10 Additive manufacturing processes, rapid manufacturing - Laser sintering of polymer parts - Quality control
PD CEN ISO/TR 11827:2016 Textiles. Composition testing. Identification of fibres
02/121542 DC : DRAFT MAR 2002 ISO/DIS 11403-2 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 2: THERMAL AND PROCESSING PROPERTIES
UNI EN ISO 11357-3 : 2013 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION
BS ISO 16805 : 2005 AMD 15790 BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF GLASS TRANSITION TEMPERATURE
UNE-EN ISO 11357-6:2013 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2008)
08/30177314 DC : DRAFT JAN 2008 BS ISO 11357-3 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION
02/122177 DC : DRAFT MAY 2002 BS ISO 16805 - BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF GLASS TRANSITION TEMPERATURE
09/30208696 DC : 0 BS EN 61189-11 ED.1 - TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 11: MEASUREMENT OF MELTING TEMPERATURE AND MELTING TEMPERATURE RANGES OF SOLDER ALLOYS
DIN EN ISO 11357-3:2013-04 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION (ISO 11357-3:2011)
UNE-EN ISO 11357-7:2016 Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics (ISO 11357-7:2015)
15/30320599 DC : DRAFT JAN 2015 BS EN 16806-1 - TEXTILES AND TEXTILE PRODUCTS - TEXTILES CONTAINING PHASE CHANGE MATERIALS (PCM) - PART 1: DETERMINATION OF THE HEAT STORAGE AND RELEASE CAPACITY
DIN EN ISO 11357-5 E : 2014 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 5: DETERMINATION OF CHARACTERISTIC REACTION-CURVE TEMPERATURES AND TIMES, ENTHALPY OF REACTION AND DEGREE OF CONVERSION (ISO 11357-5:2013)
UNI EN ISO 11358-1 : 2014 PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES
UNI EN ISO 23936-1 : 2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
BS EN ISO 11357-4:2014 Plastics. Differential scanning calorimetry (DSC) Determination of specific heat capacity
PD CEN ISO/TR 22007-5:2014 Plastics. Determination of thermal conductivity and thermal diffusivity Results of interlaboratory testing of poly(methyl methacrylate) samples
UNE-EN ISO 11358-1:2015 Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2014)
CEI EN 62788-1-6 : 1ED 2017 MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-6: ENCAPSULANTS - TEST METHODS FOR DETERMINING THE DEGREE OF CURE IN ETHYLENE-VINYL ACETATE
I.S. EN 16806-1:2016 TEXTILES AND TEXTILE PRODUCTS - TEXTILES CONTAINING PHASE CHANGE MATERIALS (PCM) - PART 1: DETERMINATION OF THE HEAT STORAGE AND RELEASE CAPACITY
I.S. EN 15860:2010 PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
ISO/TR 15655:2003 Fire resistance Tests for thermo-physical and mechanical properties of structural materials at elevated temperatures for fire engineering design
ISO 11357-3:2018 Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
I.S. EN ISO 11357-4:2014 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY (ISO 11357-4:2014)
NF ISO 11357-6 : 2011 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT)
ISO 22768:2017 Rubber, raw Determination of the glass transition temperature by differential scanning calorimetry (DSC)
ISO/TR 11827:2012 Textiles — Composition testing — Identification of fibres
ISO 21809-3:2016 Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings
UNE-EN 15860:2011 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
DIN EN ISO 16805:2005-07 Binders for paints and varnishes - Determination of glass transition temperature (ISO 16805:2003)
BS EN ISO 21809-2:2014 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Single layer fusion-bonded epoxy coatings
ONORM EN ISO 11357-2 : 2014 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT (ISO 11357-2:2013)
EN ISO 21809-2:2014 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Single layer fusion-bonded epoxy coatings (ISO 21809-2:2014)
ONORM EN ISO 11358-1 : 2014 PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES (ISO 11358-1:2014)
UNI EN ISO 13628-2 : 2007 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
ONORM EN ISO 11357-7 : 2015 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 7: DETERMINATION OF CRYSTALLIZATION KINETICS (ISO 11357-7:2015)
DIN EN ISO 11357-4:2014-10 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2014)
BS EN ISO 11358-1:2014 Plastics. Thermogravimetry (TG) of polymers General principles
PD ISO/TR 18196:2016 Nanotechnologies. Measurement technique matrix for the characterization of nano-objects
UNE-EN ISO 11357-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2014)
BS EN ISO 11357-3:2013 Plastics. Differential scanning calorimetry (DSC) Determination of temperature and enthalpy of melting and crystallization
BS EN ISO 21809-3:2016 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Field joint coatings
14/30268127 DC : 0 BS EN ISO 11357-7 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 7: DETERMINATION OF CRYSTALLIZATION KINETICS
DIN EN ISO 11358-1:2014-10 Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2014)
16/30317348 DC : 0 BS EN 15860 - PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
UNE-EN ISO 11357-2:2015 Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and glass transition step height (ISO 11357-2:2013)
BS EN 62788-1-6:2017 Measurement procedures for materials used in photovoltaic modules Encapsulants. Test methods for determining the degree of cure in Ethylene-Vinyl Acetate
17/30350545 DC : 0 BS EN ISO 11357-3 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION
DIN EN ISO 11357-5:2014-07 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 5: DETERMINATION OF CHARACTERISTIC REACTION-CURVE TEMPERATURES AND TIMES, ENTHALPY OF REACTION AND DEGREE OF CONVERSION (ISO 11357-5:2013)
BS EN ISO 23936-1:2009 Petroleum, petrochemical and natural gas industries. Non-metallic materials in contact with media related to oil and gas production Part 1: Thermoplastics
BS ISO 11357-7 : 2002
15/30309530 DC : 0 BS EN 62788-1-6 ED 1.0 - MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-6: ENCAPSULANTS - TEST METHODS FOR DETERMINING THE DEGREE OF CURE IN ETHYLENE-VINYL ACETATE ENCAPSULATION FOR PHOTOVOLTAIC MODULES
API SPEC 17J : 2014 SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
UNI EN ISO 11357-4 : 2014 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY
09/30167033 DC : 0
UNE-EN ISO 11357-5:2015 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO 11357-5:2013)
BS ISO 11357-5 : 2013 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 5: DETERMINATION OF CHARACTERISTIC REACTION-CURVE TEMPERATURES AND TIMES, ENTHALPY OF REACTION AND DEGREE OF CONVERSION
API 17J REDLINE : 2008 SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
I.S. EN ISO 11358-1:2014 PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES (ISO 11358-1:2014)
I.S. EN ISO 23936-1:2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
I.S. EN ISO 11357-3:2013 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION (ISO 11357-3:2018)
ISO/TR 18196:2016 Nanotechnologies — Measurement technique matrix for the characterization of nano-objects
ASTM E 967 : 2018 : REDLINE Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ISO 11357-2:2013 Plastics Differential scanning calorimetry (DSC) Part 2: Determination of glass transition temperature and glass transition step height
DIN EN ISO 16103:2005-09 Packaging - Transport packaging for dangerous goods - Recycled plastics material (ISO 16103:2005)
ISO 11358-1:2014 Plastics Thermogravimetry (TG) of polymers Part 1: General principles
ISO 21809-2:2014 Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Single layer fusion-bonded epoxy coatings
EN ISO 21809-3:2016 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016)
BS EN ISO 16805:2005 Binders for paints and varnishes. Determination of glass transition temperature
ISO 16805:2003 Binders for paints and varnishes — Determination of glass transition temperature
ISO/TR 22007-5:2011 Plastics Determination of thermal conductivity and thermal diffusivity Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples
IEC 61189-11:2013 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 11: Measurement of melting temperature or melting temperature ranges of solder alloys
ISO 23936-1:2009 Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 1: Thermoplastics
ISO 11357-5:2013 Plastics — Differential scanning calorimetry (DSC) — Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
EN ISO 11357-2:2014 Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and glass transition step height (ISO 11357-2:2013)
ISO 11357-4:2014 Plastics Differential scanning calorimetry (DSC) Part 4: Determination of specific heat capacity
ISO 13628-2:2006 Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications
EN 16806-1:2016 Textiles and textile products - Textiles containing phase change materials (PCM) - Part 1: Determination of the heat storage and release capacity
EN ISO 16103:2005 Packaging - Transport packages for dangerous goods - Recycled plastics material (ISO 16103:2005)
EN ISO 11358-1:2014 Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2014)
EN ISO 23936-1:2009 Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics (ISO 23936-1:2009)
EN ISO 16805:2005 Binders for paints and varnishes - Determination of glass transition temperature (ISO 16805:2003)
EN ISO 11357-7:2015 Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics (ISO 11357-7:2015)
EN ISO 11357-5:2014 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO 11357-5:2013)
BS EN ISO 11357-2:2014 Plastics. Differential scanning calorimetry (DSC) Determination of glass transition temperature and glass transition step height
DIN EN 16806-1:2016-07 TEXTILES AND TEXTILE PRODUCTS - TEXTILES CONTAINING PHASE CHANGE MATERIALS (PCM) - PART 1: DETERMINATION OF THE HEAT STORAGE AND RELEASE CAPACITY
UNI EN ISO 21809-2 : 2014 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 2: SINGLE LAYER FUSION-BONDED EPOXY COATINGS
BS EN 16806-1:2016 Textiles and textile products. Textiles containing phase change materials (PCM) Determination of the heat storage and release capacity
ASTM D 3418 : 2015 : REDLINE Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
12/30258001 DC : 0 BS ISO 11357-5 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 5: DETERMINATION OF CHARACTERISTIC REACTION-CURVE TEMPERATURES AND TIMES, ENTHALPY OF REACTION AND DEGREE OF CONVERSION
UNE-EN ISO 21809-2:2015 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Single layer fusion-bonded epoxy coatings (ISO 21809-2:2014)
NF ISO 28343 : 2010
ASTM D 5138 : 2016 : REDLINE Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)
UNE-EN ISO 11357-3:2013 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2011)
11/30211364 DC : 0 BS ISO 14322 - PLASTICS - EPOXY RESINS - DETERMINATION OF DEGREE OF CURE OF CURED EPOXY RESINS BY DIFFERENTIAL SCANNING CALORIMETRY
BS PD ISO/TR 11827 : 2012 TEXTILES - COMPOSITION TESTING - IDENTIFICATION OF FIBRES
I.S. EN 61189-11:2013 TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 11: MEASUREMENT OF MELTING TEMPERATURE OR MELTING TEMPERATURE RANGES OF SOLDER ALLOYS (IEC 61189-11:2013 (EQV))
07/30150249 DC : 0 BS EN ISO 23936-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
BS EN 15860:2010 Plastics. Thermoplastic semi-finished products for machining. Requirements and test methods
BS ISO 11357-2 : 2013 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT
S.R. CEN ISO/TR 22007-5:2014 PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 5: RESULTS OF INTERLABORATORY TESTING OF POLY(METHYL METHACRYLATE) SAMPLES (ISO/TR 22007-5:2011)
UNI EN ISO 11357-2 : 2014 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT
ISO 28343:2010 Rubber compounding ingredients Process oils Determination of glass transition temperature by DSC
I.S. EN 62788-1-6:2017 MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-6: ENCAPSULANTS - TEST METHODS FOR DETERMINING THE DEGREE OF CURE IN ETHYLENE-VINYL ACETATE
UNE-EN ISO 21809-3:2016 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016)
DIN EN 15860:2016-07 (Draft) PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
CEN ISO/TR 11827:2016 Textiles - Composition testing - Identification of fibres (ISO/TR 11827:2012)
EN 15860:2010 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
ISO 11357-7:2015 Plastics Differential scanning calorimetry (DSC) Part 7: Determination of crystallization kinetics
ISO 16103:2005 Packaging — Transport packaging for dangerous goods — Recycled plastics material
CEN ISO/TR 22007-5:2014 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples (ISO/TR 22007-5:2011)

ISO 472:2013 Plastics — Vocabulary
ISO 291:2008 Plastics Standard atmospheres for conditioning and testing
ISO 80000-5:2007 Quantities and units Part 5: Thermodynamics

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.