DIN EN 16640 E : 2017
Current
The latest, up-to-date edition.
BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD
08-16-2017
National foreword<br>European foreword <br>Introduction <br>1 Scope <br>2 Normative references <br>3 Terms and definitions <br>4 Symbols and abbreviations <br>5 Principle <br>6 Determination of the [14]C content<br>7 Calculation of the bio-based carbon content<br>8 Performance characteristics <br>9 Test report <br>Annex A (informative) - Procedures for sampling<br> of products<br>Annex B (normative) - Procedure for the conversion<br> of the carbon present in the sample to a suitable<br> sample for [14]C determination <br>Annex C (normative) - Method A - Liquid<br> Scintillation-counter method (LSC)<br>Annex D (informative) - Method C - Beta-ionization (BI) <br>Annex E (normative) - Method B - Accelerator Mass<br> Spectrometry (AMS)<br>Annex F (informative) - Performance characteristics<br>Bibliography
Defines a method for the determination of the bio-based carbon content in products, based on the [14]C content measurement.
| DocumentType |
Standard
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| CEN/TS 16137:2011 | Plastics - Determination of bio-based carbon content |
| ISO 3171:1988 | Petroleum liquids — Automatic pipeline sampling |
| EN 15440 : 2011 COR 2011 | SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF BIOMASS CONTENT |
| ISO 10715:1997 | Natural gas — Sampling guidelines |
| ISO 5555:2001 | Animal and vegetable fats and oils — Sampling |
| PREN 16785-2 : DRAFT 2015 | BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 2: DETERMINATION OF THE BIO-BASED CONTENT USING THE MATERIAL BALANCE METHOD |
| ISO 8943:2007 | Refrigerated light hydrocarbon fluids Sampling of liquefied natural gas Continuous and intermittent methods |
| ISO 3170:2004 | Petroleum liquids — Manual sampling |
| ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
| EN ISO 4257:2001 | Liquefied petroleum gases - Method of sampling (ISO 4257:2001) |
| EN ISO 21068-2:2008 | Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 2: Determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon (ISO 21068-2:2008) |
| ISO 1928:2009 | Solid mineral fuels Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value |
| ISO 10210:2012 | Plastics — Methods for the preparation of samples for biodegradation testing of plastic materials |
| ASTM C 224 : 1978 | PRACTICE FOR SAMPLING GLASS CONTAINERS |
| ISO 13833:2013 | Stationary source emissions Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide Radiocarbon sampling and determination |
| EN ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528:2013) |
| DIN 51637:2014-02 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE BIO-BASED HYDROCARBON CONTENT IN DIESEL FUELS AND MIDDLE DISTILLATES USING LIQUID SCINTILLATION METHOD |
| EN 15442:2011 | Solid recovered fuels - Methods for sampling |
| EN 14778:2011 | Solid biofuels - Sampling |
| EN 14780:2011 | Solid biofuels - Sample preparation |
| EN 16785-1:2015 | Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis |
| EN 15443:2011 | Solid recovered fuels - Methods for the preparation of the laboratory sample |
| EN ISO 13833:2013 | Stationary source emissions - Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide - Radiocarbon sampling and determination (ISO 13833:2013) |
| ASTM C 322 : 2009 | Standard Practice for Sampling Ceramic Whiteware Clays |
| EN 15400:2011 | Solid recovered fuels - Determination of calorific value |
| ISO 1795:2017 | Rubber, raw natural and raw synthetic — Sampling and further preparative procedures |
| ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes Sampling |
| ISO 4257:2001 | Liquefied petroleum gases Method of sampling |
| ISO 21068-2:2008 | Chemical analysis of silicon-carbide-containing raw materials and refractory products — Part 2: Determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon |
| ASTM D 6085 : 1997 | Standard Practice for Sampling in Rubber Testing--Terminology and Basic Concepts |
| ISO 186:2002 | Paper and board — Sampling to determine average quality |
| ASTM C 172/C172M : 2017 : REDLINE | Standard Practice for Sampling Freshly Mixed Concrete |
| ASTM D 3437 : 2015 : REDLINE | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| EN 27213:1993 | Pulps - Sampling for testing (ISO 7213:1981) |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| ASTM D 7026 : 2013 | Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis (Withdrawn 2020) |
| EN ISO 186:2002 | Paper and board - Sampling to determine average quality (ISO 186:2002) |
| EN 16575:2014 | Bio-based products - Vocabulary |
| ISO 20904:2006 | Hard coal Sampling of slurries |
| EN ISO 10715:2000 | Natural gas - Sampling guidelines (ISO 10715:1997) |
| ASTM D 5291 : 2016 : REDLINE | Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants |
| ISO 18283:2006 | Hard coal and coke Manual sampling |
| EN ISO 1716:2010 | Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
| EN ISO 3170:2004 | Petroleum liquids - Manual sampling (ISO 3170:2004) |
| ASTM D 7718 : 2011 | Standard Practice for Obtaining In-Service Samples of Lubricating Grease |
| ASTM D 2915 : 2017 : REDLINE | Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
| ISO 7213:1981 | Pulps Sampling for testing |
| EN ISO 3171:1999 | Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.