CSA Z5359 : 2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES, MEDICAL VACUUM, MEDICAL SUPPORT GASES, AND ANAESTHETIC GAS SCAVENGING SYSTEMS
Amended by
Available format(s)
Hardcopy , PDF
Superseded date
09-16-2020
Superseded by
Language(s)
English - French, French
Published date
01-01-2016
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 Test methods
6 Marking, colour coding and packaging
7 Information to be supplied by the manufacturer
Annex A (informative) - Rationale
Annex B (informative) - Environmental aspects
Annex C (informative) - Reported regional and national
deviations of colour coding and nomenclature
for medical gases
Annex CA (normative) - Maintenance and repair of
low-pressure connecting assemblies and adapters
used in health care facilities
Bibliography
Defines requirements for low-pressure hose assemblies intended for use with the following medical gases: - oxygen, - nitrous oxide, - medical air, - helium, - carbon dioxide, - xenon, - specified mixtures of the gases listed above, - oxygen-enriched air, - air for driving surgical tools, and - nitrogen for driving surgical tools.
| DevelopmentNote |
Supersedes CSA Z305.2 (04/2004)
|
| DocumentType |
Standard
|
| Pages |
68
|
| ProductNote |
NEW CHILD AMD 1 2019 IS NOW ADDED.
|
| PublisherName |
Canadian Standards Association
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| CSA Z8835.3 : 2008 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS |
| CSA Z10524-3 : 2012 : R2017 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| CSA Z10524-1 : 2012 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES |
| CSA Z10651.6 : 2006 : R2015 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 6: HOME-CARE VENTILATORY SUPPORT DEVICES |
| CSA Z17510.1 : 2010 | SLEEP APNOEA BREATHING THERAPY - PART 1: SLEEP APNOEA BREATHING THERAPY EQUIPMENT |
| CAN/CSA-C22.2 NO. 80601-2-72:17 | Medical electrical equipment — Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (Adopted ISO 80601-2-72:2015, first edition, 2015-09-01, with Canadian deviations) |
| CSA C22.2 No. 60601.2.13 : 2007 : R2012 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR THE SAFETY AND ESSENTIAL PERFORMANCE OF ANAESTHETIC SYSTEMS |
| CAN/CSA-Z15002:12 (R2017) | Flow-metering devices for connection to terminal units of medical gas pipeline systems (Adopted ISO 15002:2008, second edition, 2008-07-01, with Canadian deviations) |
| CSA Z1500:2012 | FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS |
| CSA Z305.8 : 2003 | MEDICAL SUPPLY UNITS |
| CSA C22.2 No. 80601-2-12 : 2012 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS |
| CSA Z10524-1 : 2012 : R2017 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES |
| CSA Z10524-3 : 2012 : INC : AMD 1 : 2017 : R201700 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| CSA Z10524-4 : 2012 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS |
| CSA Z10651.6 : 2006 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 6: HOME-CARE VENTILATORY SUPPORT DEVICES |
| CAN/CSA-Z305.8-03 (R2018) | Medical Supply Units |
| Z7396.1-17 | Medical gas pipeline systems - Part 1: Pipelines for medical gases, medical vacuum, medical support gases, and anaesthetic gas scavenging systems |
| CSA C22.2 No. 80601-2-12 : 2012(R2017) | MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS |
| CSA Z305.8 : 2003 : R2013 | MEDICAL SUPPLY UNITS |
| CSA Z305.8 : 2003 : UPD 1 | MEDICAL SUPPLY UNITS |
| CSA Z10651.2: 2006 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 2: HOME CARE VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS |
| CSA Z8835.5 : 2006 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 5: ANAESTHETIC VENTILATORS |
| CSA C22.2 No. 60601.2.13 :2007 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR THE SAFETY AND ESSENTIAL PERFORMANCE OF ANAESTHETIC SYSTEMS |
| CSA Z10524-3 : 2012 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| CAN/CSA-Z10524-4:12 (R2017) | Pressure regulators for use with medical gases - Part 4: Low-pressure regulators (Adopted ISO 10524-4:2008, first edition, 2008-06-01, with Canadian deviations) |
| CSA Z10651.2 : 2006 : R2015 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 2: HOME CARE VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS |
| CSA Z9170.1 : 2011 | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES, VACUUM, AND ANAESTHETIC GAS SCAVENGING SYSTEMS |
| CSA Z10651-5 : 2008 : R2018 | Lung Ventilators for Medical Use - Particular Requirements for Basic Safety and Essential Performance - Part 5: Gas-Powered Emergency Resuscitators |
| CSA Z10651-5 : 2008 : R2013 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 5: GAS-POWERED EMERGENCY RESUSCITATORS |
| CSA Z10651-5 : 2008 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 5: GAS-POWERED EMERGENCY RESUSCITATORS |
| CSA Z9170.1 : 2011 : R2015 | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES, VACUUM, AND ANAESTHETIC GAS SCAVENGING SYSTEMS |
| CSA Z10651-5 : 2008 : INC : UPD 1 : 2011 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 5: GAS-POWERED EMERGENCY RESUSCITATORS |
| ISO 5774:2016 | Plastics hoses — Textile-reinforced types for compressed-air applications — Specification |
| ISO 80601-2-13:2011 | Medical electrical equipment Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation |
| Z7396.1-17 | Medical gas pipeline systems - Part 1: Pipelines for medical gases, medical vacuum, medical support gases, and anaesthetic gas scavenging systems |
| EN 15986:2011 | Symbol for use in the labelling of medical devices - Requirements for labelling of medical devices containing phthalates |
| CGSB 24.2 : M86 | IDENTIFICATION OF MEDICAL GAS CONTAINERS, PIPELINES AND VALVES |
| IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
| ISO 15001:2010 | Anaesthetic and respiratory equipment Compatibility with oxygen |
| IEC TR 60788:2004 | Medical electrical equipment - Glossary of defined terms |
| IEC 60601-1-6:2010+AMD1:2013 CSV | Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability |
| ISO 13485:2016 | Medical devices Quality management systems Requirements for regulatory purposes |
| CGA C 9 : 2013 | STANDARD COLOR MARKING OF COMPRESSED GAS CONTAINERS FOR MEDICAL USE |
| IEC 62366:2007+AMD1:2014 CSV | Medical devices - Application of usability engineering to medical devices |
| ISO 32:1977 | Gas cylinders for medical use — Marking for identification of content |
| ISO 80601-2-12:2011 | Medical electrical equipment Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators |
| ISO/IEC Guide 51:2014 | Safety aspects — Guidelines for their inclusion in standards |
| ISO 10524-3:2005 | Pressure regulators for use with medical gases Part 3: Pressure regulators integrated with cylinder valves |
| ISO 11197:2016 | Medical supply units |
| EN 15908:2010 | Anaesthetic and respiratory equipment - Non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases |
| EN 1089-3:2011 | Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 3: Colour coding |
| CGA V 5 : 2008(R2013) | DIAMETER INDEX SAFETY SYSTEM (NON-INTERCHANGEABLE LOW PRESSURE CONNECTIONS FOR MEDICAL GAS APPLICATIONS) |
| ISO 7751:2016 | Rubber and plastics hoses and hose assemblies Ratios of proof and burst pressure to maximum working pressure |
| AS 2896-2011 | Medical gas systems - Installation and testing of non-flammable medical gas pipeline systems |
| ISO 14155:2011 | Clinical investigation of medical devices for human subjects Good clinical practice |
| ISO 9170-1:2017 | Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with compressed medical gases and vacuum |
| AS 4484:2016 | Gas cylinders for industrial, scientific, medical and refrigerant use - Labelling and colour coding |
| ISO 1402:2009 | Rubber and plastics hoses and hose assemblies Hydrostatic testing |
| ISO 1307:2006 | Rubber and plastics hoses — Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| ISO 4135:2001 | Anaesthetic and respiratory equipment Vocabulary |
| ISO 10524-1:2006 | Pressure regulators for use with medical gases Part 1: Pressure regulators and pressure regulators with flow-metering devices |
| ISO 18082:2014 | Anaesthetic and respiratory equipment — Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases |
| ISO 8033:2016 | Rubber and plastics hoses Determination of adhesion between components |
| ISO 7396-1:2016 | Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.