CSA Z10524-3 : 2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES
Hardcopy , PDF
10-10-2020
English, French
01-01-2017
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 General requirements
6 Test methods
7 Marking, colour coding, packaging
8 Information to be supplied by the manufacturer
Annex A (informative) - Examples of pressure regulators
integrated with cylinder valves
Annex B (informative) - Rationale
Annex C (informative) - Reported regional and national
deviations of colour coding and nomenclature
for medical gases
Bibliography
Pertains to pressure regulators integrated with cylinder valves intended for the administration of medical gases in the treatment, management, diagnostic evaluation and care of patients for use with the following medical gases: - oxygen; - nitrous oxide; - air for breathing; - helium; - carbon dioxide; - xenon; - specified mixtures of the gases listed above; - air for driving surgical tools; - nitrogen for driving surgical tools.
| DevelopmentNote |
Amendment 1 is available separately, see CSA Z10524-3A. (08/2017)
|
| DocumentType |
Standard
|
| Pages |
56
|
| ProductNote |
Reconfirmed EN
|
| PublisherName |
Canadian Standards Association
|
| Status |
Superseded
|
| SupersededBy |
| Z7396.1-17 | Medical gas pipeline systems - Part 1: Pipelines for medical gases, medical vacuum, medical support gases, and anaesthetic gas scavenging systems |
| CGSB 24.2 : M86 | IDENTIFICATION OF MEDICAL GAS CONTAINERS, PIPELINES AND VALVES |
| ISO 10920:1997 | Gas cylinders — 25E taper thread for connection of valves to gas cylinders — Specification |
| IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
| ISO 15001:2010 | Anaesthetic and respiratory equipment Compatibility with oxygen |
| EN ISO 11116-1 : 1999 | GAS CYLINDERS - 17E TAPER THREAD FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATIONS |
| EN 737-1 : 1998 | MEDICAL GAS PIPELINE SYSTEMS - TERMINAL UNITS FOR COMPRESSED MEDICAL GASES AND VACUUM |
| ASME B40.100 : 2013 | Pressure Gauges and Gauge Attachments (B40.100 - 2013) |
| ISO 13341:2010 | Gas cylinders — Fitting of valves to gas cylinders |
| EN 737-3:1998/A1:1999 | MEDICAL GAS PIPELINE SYSTEMS - PIPELINES FOR COMPRESSED MEDICAL GASES AND VACUUM |
| CGA C 9 : 2013 | STANDARD COLOR MARKING OF COMPRESSED GAS CONTAINERS FOR MEDICAL USE |
| ISO 5145:2014 | Cylinder valve outlets for gases and gas mixtures Selection and dimensioning |
| ISO 32:1977 | Gas cylinders for medical use — Marking for identification of content |
| ISO 15245-1:2001 | Gas cylinders Parallel threads for connection of valves to gas cylinders Part 1: Specification |
| ISO 10297:2014 | Gas cylinders — Cylinder valves — Specification and type testing |
| ISO 5359:2014 | Anaesthetic and respiratory equipment — Low-pressure hose assemblies for use with medical gases |
| ISO 2503:2009 | Gas welding equipment Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) |
| ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
| ASTM G 175 : 2013 : REDLINE | Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Pressure Regulators Used for Medical and Emergency Applications |
| EN 739:1998/A1:2002 | LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES |
| EN 962:1996/A2:2000 | TRANSPORTABLE GAS CYLINDERS - VALVE PROTECTION CAPS AND VALVE GUARDS FOR INDUSTRIAL AND MEDICAL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTS |
| EN 1089-3:2011 | Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 3: Colour coding |
| CGA V 5 : 2008(R2013) | DIAMETER INDEX SAFETY SYSTEM (NON-INTERCHANGEABLE LOW PRESSURE CONNECTIONS FOR MEDICAL GAS APPLICATIONS) |
| EN 849:1996/A2:2001 | TRANSPORTABLE GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING |
| ISO 407:2004 | Small medical gas cylinders Pin-index yoke-type valve connections |
| CSA Z5359 : 2016 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES, MEDICAL VACUUM, MEDICAL SUPPORT GASES, AND ANAESTHETIC GAS SCAVENGING SYSTEMS |
| AS 2896-2011 | Medical gas systems - Installation and testing of non-flammable medical gas pipeline systems |
| EN 738-3:1998/A1:2002 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| ISO/TR 7470:1988 | Valve outlets for gas cylinders — List of provisions which are either standardized or in use |
| ISO 9170-1:2017 | Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with compressed medical gases and vacuum |
| AS 4484:2016 | Gas cylinders for industrial, scientific, medical and refrigerant use - Labelling and colour coding |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| ISO 4135:2001 | Anaesthetic and respiratory equipment Vocabulary |
| EN 13544-2:2002+A1:2009 | Respiratory therapy equipment - Part 2: Tubing and connectors |
| ISO 11117:2008 | Gas cylinders Valve protection caps and valve guards Design, construction and tests |
| ISO 15996:2017 | Gas cylinders — Residual pressure valves — Specification and type testing of cylinder valves incorporating residual pressure devices |
| ISO 7396-1:2016 | Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.