BS 6072:1981
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Method for magnetic particle flaw detection
Hardcopy , PDF
12-21-2001
English
02-27-1981
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
0 Introduction
1 Scope
2 References
3 Definitions
4 Magnetizing apparatus and associated equipment
5 Detecting media
6 Safety precautions
7 Testing procedures
8 Surface preparation
9 Magnetization
10 Current flow technique
11 Threading bar or cable technique
12 Rigid coil technique
13 Flexible cable technique (coil technique using a
flexible cable)
14 Flexible cable technique (using a flexible cable
adjacent to the test surface)
15 Magnetic flow technique
16 Induced current flow technique
17 Current flow (prods) technique
18 Application of detecting medium
19 Viewing
20 Recording of indications
21 Reporting
22 Demagnetization
23 Cleaning
Appendix A - Selection of test techniques for magnetizing
material or components of specified
geometric shape
Appendix B - Methods for determining the inspected areas
when using the current flow (prods) technique
Appendix C - Test pieces and test procedure
Appendix D - Report, technique and procedure sheets
Appendix E - Preservation of indications
Publications referred to
Covers magnetizing and associated equipment; detecting media; safety precautions; testing procedures; surface preparation; magnetization; application of detecting medium; viewing; recording of indications; reporting; demagnetization. Appendices cover selection of techniques, areas to be inspected, test pieces, report, technique and procedure sheets and preservation of indications. See also PD 6513.
| Committee |
WEE/46
|
| DevelopmentNote |
Supersedes 79/72952 DC, BS 4124-2(1968) and BS 4397(1969) Inactive for the new design. (09/2005)
|
| DocumentType |
Standard
|
| Pages |
36
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This British Standard specifies techniques and procedures for magnetic particle flaw detection of ferromagnetic materials. Magnetic particle flaw detection is primarily used for the detection of surface-breaking flaws, particularly cracks. It can also detect flaws just below the surface, but its sensitivity diminishes rapidly with depth.
| BS 4S 500:2010 | Aerospace series. Procedure for inspection, testing and acceptance of steel sheet and strip |
| BS AU 24a:1989 | Specification for towing connections for trailers up to 5000 kg gross mass |
| BS 6779-3:1994 | Highway parapets for bridges and other structures Specification for vehicle containment parapets of combined metal and concrete construction |
| BS 6990:1989 | Code of practice for welding on steel pipes containing process fluids or their residuals |
| DEFSTAN 02-826(PT2)/1(2000) : 2000 | REQUIREMENTS FOR Q2 (NAVY) QUALITY STEEL - PART 2: FORGINGS |
| PD 6513:1985 | Magnetic particle flaw detection. A guide to the principles and practice of applying magnetic particle flaw detection in accordance with BS 6072 |
| DEFSTAN 02-729(PT2)/2(2005) : 2005 | REQUIREMENTS FOR NON-DESTRUCTIVE EXAMINATION METHODS IN HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS - PART 2: MAGNETIC PARTICLE |
| BS 7072:1989 | Code of practice for inspection and repair of offshore containers |
| EEMUA 197 : 1999 | SPECIFICATION FOR FABRICATION OF NON-PRIMARY STRUCTURAL STEELWORK FOR OFFSHORE INSTALLATIONS |
| DEFSTAN 95-17/1(1991) : 1991 | TRACK PINS, INDUCTION HARDENED |
| DEFSTAN 07-85(PT1)/3(2006) : 2006 | DESIGN REQUIREMENTS FOR WEAPONS AND ASSOCIATED SYSTEMS - PART 1: MANDATORY DESIGN REQUIREMENTS |
| BS 4515-1:2004 | Specification for welding of steel pipelines on land and offshore Carbon and carbon manganese steel pipelines |
| BS 2790:1992 | Specification for design and manufacture of shell boilers of welded construction |
| BS 1894:1992 | Specification for design and manufacture of electric boilers of welded construction |
| BS 4204:1989 | Specification for flash welding of steel tubes for pressure applications |
| BS 4570:1985 | Specification for fusion welding of steel castings |
| BS 3066:1995 | Specification for engineers\' cold chisels and allied tools |
| BS 4871-3:1985 | Specification for approval testing of welders working to approved welding procedures Arc welding of tube to tube-plate joints in metallic materials |
| BS 500:2000 | Steel sleepers |
| SBAC TS 108 : 5 | MANUFACTURING SPECIFICATION FOR STUDS, BOLTS AND SCREWS IN BS S159 MATERIAL 1100 MPA (159,000 LBF/IN[2]) TENSILE AT ROOM TEMPERATURE (FOR WHICH FORGING IS OPTIONAL AND QUALIFICATION NOT A REQUIREMENT) |
| BS 2633:1987 | Specification for Class I arc welding of ferritic steel pipework for carrying fluids |
| BS 806:1993 | Specification for design and construction of ferrous piping installations for and in connection with land boilers |
| BS 5950-2:2001 | STRUCTURAL USE OF STEELWORK IN BUILDING - PART 2: SPECIFICATION FOR MATERIALS, FABRICATION AND ERECTION - ROLLED AND WELDED SECTIONS |
| SAEITC TS 22 ISSUE 10 : 2008 | MANUFACTURING SPECIFICATION FOR BOLTS, 1100 MPA (159,000 LBF/IN[2]) - ULTIMATE TENSILE STRENGTH - MINIMUM AT ROOM TEMPERATURE |
| BS 876:1995 | Specification for hand hammers |
| BS 6223:1990 | Specification for friction welding of joints in metals |
| BS 6779-1:1998 | Highway parapets for bridges and other structures Specification for vehicle containment parapets of metal construction |
| SBAC TS 145 : 4 | TECHNICAL SPECIFICATION NO. TS145 - MANUFACTURING SPECIFICATION FOR BOLTS (UNIFIED THREADS) HEAT RESISTING ALLOY STEEL FV535, CLASSIFICATION RM >= 1000 MPA (145,000 LBF/IN[2]) @ TA/+550 DEGREES C |
| BS 3603:1991 | Specification for carbon and alloy steel pipes and tubes with specified low temperature properties for pressure purposes |
| DEFSTAN 10-13/3(1999) : 1999 | STEEL FORGINGS FOR GUNS |
| BS 4A 100:2003 | Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa |
| 02/712630 DC : DRAFT OCT 2002 | BS EN 14587-1 - RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 1: NEW 220 AND 260 GRADE RAILS IN A FIXED PLANT |
| BS 7833:1995 | Specification for firefighters\' axes with glass fibre shafts |
| DEFSTAN 95-16/2(1997) : 1997 | THE MANUFACTURE OF ARMAMENT COMPONENTS IN WELDABLE CHROMIUM-NICKEL-COPPER-MOLYBDENUM PRECIPITATION HARDENING CHROMIUM RESISTING STEEL |
| BS 436-3:1986 | Spur and helical gears Method for calculation of contact and root bending stress limitations for metallic involute gears |
| BS 235:1987 | Specification for gears for electric traction |
| BS 3A 100:1991 | Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa |
| BS 7818:1995 | Specification for pedestrian restraint systems in metal |
| BS 5138:1974 | Specification for magnetic particle flaw inspection of finished machined solid forged and drop stamped crankshafts |
| BS 3604-2:1991 | Steel pipes and tubes for pressure purposes: ferritic alloy steel with specified elevated temperature properties. Specification for longitudinally arc welded tubes |
| BS 3S 500:1996 | Procedure for inspection, testing and acceptance of steel sheet and strip |
| EEMUA 179 : 1996 | WORKING GUIDE FOR CARBON STEEL EQUIPMENT IN WET H[2]S SERVICE |
| DEFSTAN 10-13/4(2005) : 2005 | STEEL FORGINGS FOR GUNS |
| EEMUA 190 : 2000 | GUIDE FOR THE DESIGN, CONSTRUCTION AND USE OF MOUNDED HORIZONTAL CYLINDRICAL VESSELS FOR PRESSURISED STORAGE OF LPG AT AMBIENT TEMPERATURE |
| BS 7777-2:1993 | Flat-bottomed, vertical, cylindrical storage tanks for low temperature service Specification for the design and construction of single, double and full containment metal tanks for the storage of liquefied gas at temperatures down to -165°C |
| BS 6944:1988 | Specification for flash welding of butt joints in ferrous metals (excluding pressure piping applications) |
| DEFSTAN 95-17/2(2004) : 2004 | TRACK PINS, INDUCTION HARDENED |
| DEFSTAN 02-729(PT2)/1(2000) : 2000 | REQUIREMENTS FOR NON-DESTRUCTIVE EXAMINATION METHODS - PART 2: MAGNETIC PARTICLE |
| DEFSTAN 95-28/2(2004) : 2004 | SPROCKET RINGS |
| DEFSTAN 02-736(PT2)/1(2000) : 2000 | REQUIREMENTS FOR Q1 (NAVY) QUALITY STEEL - PART 2: FORGINGS |
| BS 5892-1(1992) : 1992 | RAILWAY ROLLING STOCK MATERIALS - PART 1: SPECIFICATION FOR AXLES FOR TRACTION AND TRAILING STOCK |
| BS 2646-1:1993 | Autoclaves for sterilization in laboratories Specification for design, construction, safety and performance |
| BS 5400-6:1999 | STEEL, CONCRETE AND COMPOSITE BRIDGES - PART 6: SPECIFICATION FOR MATERIALS AND WORKMANSHIP, STEEL |
| BS MA 35:1975 | Specification for ships\' deck machinery - windlasses |
| BS 1134:1961 | Centre-line-average height method for the assessment of surface texture |
| BS 5165:1974 | Guide to the selection of low-power magnifiers used for visual inspection |
| BS 970(1972) : LATEST | |
| BS 4069(1966) : LATEST | |
| BS MA 2-7:1972 | Specification for magnetic compasses and binnacles Individual testing of magnetic compasses and accessories: Classes A and B |
| BS 5044:1973 | Specification for contrast aid paints used in magnetic particle flaw detection |
| BS 2451:1963 | Specification for chilled iron shot and grit |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.