ASTM E 2148 : 2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety
Available format(s)
Hardcopy , PDF
Superseded date
01-05-2022
Superseded by
Language(s)
English
Published date
10-06-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.This guide covers information on how to use documents related to health and safety of metalworking and metal removal fluids.
| Committee |
E 34
|
| DocumentType |
Guide
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This guide covers information on how to use documents related to health and safety of metalworking and metal removal fluids. As such, this guide will provide the user with sufficient background information to effectively use the documents listed in Section 2. Documents referenced in this guide are grouped as applicable to producers, to users or to all.
1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.
| ASTM E 2889 : 2012 : R2017 | Standard Practice for Control of Respiratory Hazards in the Metal Removal Fluid Environment |
| ASTM E 1497 : 2017 | Standard Practice for Selection and Safe Use of Water-Miscible and Straight Oil Metal Removal Fluids |
| ASTM E 1687 : 2010 : R2014 | Standard Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids |
| ASTM E 2693 : 2014 | Standard Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment |
| ASTM F 86 : 2021 | Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants |
| ASTM E 2523 : 2007 | Standard Terminology for Metalworking Fluids and Operations |
| ASTM E 2889 : 2012 : R2017 | Standard Practice for Control of Respiratory Hazards in the Metal Removal Fluid Environment |
| ASTM E 2169 : 2001 | Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids |
| ASTM E 1542 : 2010 | Standard Terminology Relating to Occupational Health and Safety |
| ASTM E 1687 : 2004 | Standard Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids |
| ASTM E 1542 : 1993 : R2004 | Standard Terminology Relating to Occupational Health and Safety |
| ASTM E 2564 : 2018 | Standard Practice for Enumeration of <emph type="bdit">Mycobacteria</emph> in Metalworking Fluids by Direct Microscopic Counting (DMC) Method |
| ASTM D 1356 : 2015 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM E 1687 : 1998 | Standard Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids |
| ASTM E 1497 : 2000 | Standard Practice for Safe Use of Water-Miscible Metal Removal Fluids |
| ASTM E 2523 : 2013 : R2018 | Standard Terminology for Metalworking Fluids and Operations |
| ASTM E 1542 : 2021 | Standard Terminology Relating to Occupational Health and Safety |
| ASTM E 2144 : 2001 : R2007 | Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres |
| ASTM E 1542 : 2020 : REV A | Standard Terminology Relating to Occupational Health and Safety |
| ASTM D 7049 : 2017 | Standard Test Method for Metalworking Fluid Aerosol in Workplace Atmospheres |
| ASTM D 1356 : 2017 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM E 2694 : 2011 | Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids |
| ASTM E 2694 : 2009 | Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids |
| ASTM E 2563 : 2007 | Standard Test Method for Enumeration of Non-Tuberculosis Mycobacteria in Aqueous Metalworking Fluids by Plate Count Method |
| ASTM E 2564 : 2013 | Standard Practice for Enumeration of <emph type="ital">Mycobacteria</emph> in Metalworking Fluids by Direct Microscopic Counting (DMC) Method |
| ASTM E 2693 : 2014 | Standard Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment |
| ASTM E 1497 : 2005 : R2011 | Standard Practice for Safe Use of Water-Miscible Metal Removal Fluids |
| ASTM E 1302 : 2012 | Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
| ASTM E 2564 : 2007 | Standard Test Method for Enumeration of <i>Mycobacteria</i> in Metalworking Fluids by Direct Microscopic Counting (DMC) Method |
| ASTM E 1302 : 2013 : R2017 | Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
| ASTM E 2657 : 2016 | Standard Practice for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids |
| ASTM D 1356 : 2015 : REV B | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM E 2563 : 2013 | Standard Practice for Enumeration of Non-Tuberculosis <emph type="ital">Mycobacteria</emph > in Aqueous Metalworking Fluids by Plate Count Method |
| ASTM E 2889 : 2012 | Standard Practice for Control of Respiratory Hazards in the Metal Removal Fluid Environment |
| ASTM E 2144 : 2001 | Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres |
| ASTM E 1542 : 2020 : REV B | Standard Terminology Relating to Occupational Health and Safety |
| ASTM D 1356 : 2014 : REV A | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM E 1497 : 2005 | Standard Practice for Safe Use of Water-Miscible Metal Removal Fluids |
| ASTM E 1687 : 2010 | Standard Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids |
| ASTM E 1687 : 2010 : R2014 | Standard Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids |
| ASTM E 2657 : 2011 | Standard Test Method for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids |
| ASTM E 2144 : 2011 : R2016 | Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres |
| ASTM E 2523 : 2006 | Standard Terminology for Metalworking Fluids and Operations |
| ASTM E 2523 : 2011 | Standard Terminology for Metalworking Fluids and Operations |
| ASTM E 2693 : 2009 | Standard Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment |
| ASTM E 2694 : 2016 | Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids |
| ASTM E 1542 : 2020 | Standard Terminology Relating to Occupational Health and Safety |
| ASTM E 1542 : 2018 | Standard Terminology Relating to Occupational Health and Safety |
| ASTM D 1356 : 2015 : REV A | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM D 1356 : 2005 : R2010 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM E 1687 : 2019 | Standard Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids |
| ASTM E 1302 : 2000 | Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
| ASTM E 1542 : 1993 : R1998 | Standard Terminology Relating to Occupational Health and Safety |
| ASTM E 1497 : 2017 | Standard Practice for Selection and Safe Use of Water-Miscible and Straight Oil Metal Removal Fluids |
| ASTM E 2693 : 2019 | Standard Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment |
| ASTM D 1356 : 2020 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM D 1356 : 2000 : REV A | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM D 1356 : 2014 : REV B | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM D 1356 : 2014 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM E 1302 : 2000 : R2007 | Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
| ASTM E 2657 : 2009 | Standard Test Method for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids |
| ASTM E 2169 : 2017 | Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids |
| ASTM E 2563 : 2018 | Standard Practice for Enumeration of Non-Tuberculosis <emph type="bdit">Mycobacteria</emph > in Aqueous Metalworking Fluids by Plate Count Method |
| ASTM E 1302 : 2013 | Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
| ASTM D 1356 : 2005 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM E 2144 : 2011 | Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres |
| ASTM E 2169 : 2001 : R2007 | Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids |
| ASTM E 2523 : 2013 | Standard Terminology for Metalworking Fluids and Operations |
| ASTM E 2564 : 2011 | Standard Test Method for Enumeration of <i>Mycobacteria</i> in Metalworking Fluids by Direct Microscopic Counting (DMC) Method |
| ASTM E 2169 : 2012 | Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids |
| ASTM D 7049 : 2004 | Standard Test Method for Metal Removal Fluid Aerosol in Workplace Atmospheres |
| ASTM D 7049 : 2004 : R2010 | Standard Test Method for Metal Removal Fluid Aerosol in Workplace Atmospheres |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.