ASTM D 2862 : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Particle Size Distribution of Granular Activated Carbon
Hardcopy , PDF
10-10-2022
English
07-15-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.This test method covers the determination of the particle size distribution of granular activated carbon. For the purposes of this test, granular activated carbon is defined as a minimum of 90 % of the sample weight being retained on a 180-μm Standard sieve.
| Committee |
D 28
|
| DocumentType |
Test Method
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This test method covers the determination of the particle size distribution of granular activated carbon. For the purposes of this test, granular activated carbon is defined as a minimum of 90 % of the sample weight being retained on a 180-μm Standard sieve. A U.S. mesh 80 sieve is equivalent to a 180–μm Standard sieve.
Note 1:For extruded carbons, as the length/diameter ratio of the particles increases, the validity of the test results might be affected.
1.2The data obtained may also be used to calculate mean particle diameter (MPD), effective size, and uniformity coefficient.
1.3The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3.1Exception—All mass measurements are in SI units only.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 4069 : 1995 : R2014 | Standard Specification for Impregnated Activated Carbon Used to Remove Gaseous Radio-Iodines from Gas Streams |
| ASTM C 781 : 2018 | Standard Practice for Testing Graphite Materials for Gas-Cooled Nuclear Reactor Components |
| ASTM D 3802 : 2016 | Standard Test Method for Ball-Pan Hardness of Activated Carbon |
| ASTM D 2854 : 2009 : R2014 | Standard Test Method for Apparent Density of Activated Carbon |
| ASTM D 6586 : 2003 : R2014 | Standard Practice for the Prediction of Contaminant Adsorption On GAC In Aqueous Systems Using Rapid Small-Scale Column Tests |
| ASTM E 1568 : 2013 | Standard Test Method for Determination of Gold in Activated Carbon by Fire Assay Gravimetry |
| ASTM C 781 : 2020 | Standard Practice for Testing Graphite Materials for Gas-Cooled Nuclear Reactor Components |
| ASTM E 1568 : 2021 | Standard Test Method for Determination of Gold in Activated Carbon by Fire Assay Gravimetry |
| ASTM D 6586 : 2003 : R2021 | Standard Practice for the Prediction of Contaminant Adsorption on GAC in Aqueous Systems Using Rapid Small-Scale Column Tests |
| ASTM D 4069 : 1995 : R2020 | Standard Specification for Impregnated Activated Carbon Used to Remove Gaseous Radio-Iodines from Gas Streams |
| ASTM E 11 : 2020 | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
| ASTM D 2652 : 2011 | Standard Terminology Relating to Activated Carbon |
| ASTM D 2854 : 2009 : R2019 | Standard Test Method for Apparent Density of Activated Carbon |
| ASTM E 177 : 1990 : REV A : R1996 | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
| ASTM D 2854 : 1996 : R2004 | Standard Test Method for Apparent Density of Activated Carbon |
| ASTM D 2652 : 2005 | Standard Terminology Relating to Activated Carbon |
| ASTM D 2652 : 2021 | Standard Terminology Relating to Activated Carbon |
| ASTM D 2652 : 1994 : R1999 | Standard Terminology Relating to Activated Carbon |
| ASTM E 691 : 2020 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 691 : 2019 : EDT 1 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 11 : 2022 | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
| ASTM D 2854 : 2009 : R2014 | Standard Test Method for Apparent Density of Activated Carbon |
| ASTM D 2854 : 1996 : R2000 | Standard Test Method for Apparent Density of Activated Carbon |
| ASTM E 300 : 2003 : R2022 | Standard Practice for Sampling Industrial Chemicals |
| ASTM E 691 : 2022 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 691 : 2009 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM D 2854 : 2009 | Standard Test Method for Apparent Density of Activated Carbon |
| ASTM D 2652 : 2005 : REV A | Standard Terminology Relating to Activated Carbon |
| ASTM E 691 : 2021 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 300 : 2003 : R2017 | Standard Practice for Sampling Industrial Chemicals |
| ASTM D 2652 : 2011 : R2020 | Standard Terminology Relating to Activated Carbon |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.