AS 4087:2011
Current
The latest, up-to-date edition.
Metallic flanges for waterworks purposes
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
05-26-2011
Important note : All end users must be registered with an Account prior to user licenses being assigned.Provides manufacturers with requirements for metallic flanges for waterworks purposes and installers of flanged components guidance on the most appropriate jointing requirements to achieve a satisfactory long-term watertight joint.
| Committee |
WS-022
|
| DocumentType |
Standard
|
| ISBN |
978 0 7337 9866 5
|
| Pages |
35
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes | |
| UnderRevision |
This Standard specifies requirements for circular flanges manufactured from copper alloy, grey cast iron, ductile cast iron, or steel. The external shapes of flanges may alternatively be any other shape.It covers nominal sizes with pressure ratings for PN 14, PN 16, PN 21 and PN 35 at operating temperatures not exceeding 80°C. The Standard also specifies requirements for jointing materials.Flanges are suitable for use on pipes, pipe fittings, valves and other appurtenances that are primarily intended for the conveyance or storage of water or wastewater. For applications outside the limits specified in this Standard the appropriate flange details may be determined from AS 2129 series, Flanges for pipes, valves and fittings, and AS/NZS 4331 series, Metallic flanges.
Originated as AS 4087-1993.
Third edition 2004.
Revised and redesignated as AS/NZS 4087:2011.
Reissued incorporating Amendment No 2 (June 2023) as AS 4087:2011.
| AS 1565-1996 | Copper and copper alloys - Ingots and castings (Reconfirmed 2020) |
| AS 2074-2003 | Cast steels |
| AS/NZS 4020:2005 | Testing of products for use in contact with drinking water |
| AS/NZS 3678:2011 | Structural steel - Hot-rolled plates, floorplates and slabs |
| AS 1214-1983 | Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series) |
| AS 1110.1-2000 | ISO metric hexagon bolts and screws - Product grades A and B - Bolts |
| AS/NZS 4291.2:1995 | Mechanical properties of fasteners Nuts with specified proof load values - Coarse thread |
| AS 1831-2007 | Ductile cast iron (Reconfirmed 2017) |
| AS 1112.1-2000 | ISO metric hexagon nuts Style 1 - Product grades A and B |
| AS 2382-1981 | Surface roughness comparison specimens |
| AS 2528-1982 | Bolts, studbolts and nuts for flanges and other high and low temperature applications |
| AS 1111.1-2000 | ISO metric hexagon bolts and screws - Product grade C - Bolts |
| AS 1237.2-2002 | Plain washers for metric bolts, screws and nuts for general purposes - Tolerances |
| AS 1646-2007 | Elastomeric seals for waterworks purposes (Reconfirmed 2018) |
| AS/NZS 2280:2004 | Ductile iron pipes and fittings |
| AS 1830-2007 | Grey cast iron (Reconfirmed 2017) |
| AS 4291.1-2000 | Mechanical properties of fasteners made of carbon steel and alloy steel - Bolts, screws and studs |
| AS 2304:2019 | Water storage tanks for fire protection systems |
| AS/NZS 3500.4:2015 | Plumbing and drainage Heated water services |
| AS/NZS 3500.2:2018 | Plumbing and drainage Sanitary plumbing and drainage |
| AS/NZS 3518:2013 | Acrylonitrile butadine styrene (ABS) compounds, pipes and fittings for pressure applications (Reconfirmed 2024) |
| AS/NZS 3500.1:2018 | Plumbing and drainage Water Services |
| AS 1172.2:2014 | Sanitary plumbing products Flushing devices and cistern inlet and outlet valves |
| AS 4181-2013 | Repair and off-take clamps for water industry purposes (Reconfirmed 2023) |
| AS 4747.2-2013 | Meters for non-urban water supply Technical requirements for closed conduit meters fully charged |
| AS 4809:2017 | Copper pipe and fittings - Installation and commissioning |
| AS/NZS 3500.3:2018 | Plumbing and drainage Stormwater drainage |
| AS/NZS 2280:2014 | Ductile iron pipes and fittings |
| AS/NZS 2280:2020 | Ductile iron pipes and fittings |
| AS/NZS 3500.4:2018 | Plumbing and drainage Heated water services |
| AS 4795.2-2011 | Butterfly valves for waterworks purposes Double flanged |
| AS 2304-2011 | Water storage tanks for fire protection systems |
| AS 5830.2-2012 | In-line ball valves for use in plumbing water supply systems Plastics-bodied |
| AS/NZS 3500.3:2015 | Plumbing and drainage Stormwater drainage |
| AS/NZS 2280:2012 | Ductile iron pipes and fittings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.