Preview

Masonry Structures

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

02-14-2018

Publisher

Standards Australia

Preview

US$201.89

Excluding Tax where applicable

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Specifies minimum requirements for the design and construction of unreinforced, reinforced and prestressed masonry, including built-in components.

Committee	BD-004
DocumentType	Standard
ISBN	978-1-76035-989-8
Pages	160
PublisherName	Standards Australia
Status	Current
Supersedes	AS 3700-2011 Amd 2:2015 AS 3700-2011 AMDT 1 DR AS 3700:2017 AS 3700-2011

This Standard sets out minimum requirements for the design and construction of masonry of the following types:(a) Unreinforced, reinforced and prestressed masonry using manufactured units of clay or concrete laid in mortar.(b) Unreinforced masonry using manufactured calcium silicate units laid in mortar.(c) Autoclaved aerated concrete (AAC) masonry laid in thin-bed mortar.(d) Square-dressed natural stone laid in mortar.This Standard does not provide for the following:(i) Design values or material properties for the design and construction of masonry incorporating square-dressed natural stone. The wide variations in properties of natural stone require that each case be considered individually for the determination of relevant design values.(ii) Specific requirements for prefabricated masonry panels or masonry in composite action with steel or concrete structural members; however, the principles of this Standard may be used for such types of construction.(iii) Specification for design and construction of AAC laid in other than thin-bed mortar; however, for masonry so constructed the principles of this Standard may be used.NOTE: This Standard assumes the structural design of masonry is entrusted to experienced structural engineers or similar appropriately qualified persons, and that the execution of such work is carried out under the direction of appropriately qualified persons who are experienced in masonry construction and who understand the structural requirements specified herein.

Originated in part as AS CA32-1963.
Previous edition AS3700-2011.
Fifth edition AS3700:2018.

AS 1478.1-2000	Chemical admixtures for concrete, mortar and grout Admixtures for concrete (Reconfirmed 2018)
AS/NZS 2311:2017	Guide to the Painting of Buildings
AS/NZS 1170.0:2002	Structural design actions General principles
AS 3972-2010	General purpose and blended cements
AS 1530.4:2014	Methods for fire tests on building materials, components and structures Fire-resistance tests for elements of construction
AS 2701-2001	Methods of sampling and testing mortar for masonry construction (Reconfirmed 2015)
AS/NZS 3582.3:2016	Supplementary cementitious materials Amorphous silica
AS/NZS 4456.11:2003	Masonry units, segmental pavers and flags - Methods of test Determining coefficients of expansion (Reconfirmed 2023)
AS 5100.7:2017	Bridge design Bridge assessment
AS/NZS 4456.15:2003	Masonry units, segmental pavers and flags - Methods of test Determining lateral modulus of rupture (Reconfirmed 2023)
AS 5100.8:2017	Bridge design Rehabilitation and strengthening of existing bridges
AS 5100.9:2017	Bridge design Timber
AS/NZS 2904:1995	Damp-proof courses and flashings
AS/NZS 4456.4:2003	Masonry units, segmental pavers and flags - Methods of test Determining compressive strength of masonry units
AS/NZS 4456.10:2003	Masonry units, segmental pavers and flags - Methods of test Determining resistance to salt attack (Reconfirmed 2023)
AS/NZS 4680:2006	Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017)
AS 3600-2009	Concrete structures
AS/NZS 2699.1:2000	Built-in components for masonry construction Wall ties
AS 2758.1:2014	Aggregates and rock for engineering purposes Concrete aggregates
AS 4055-2012	Wind loads for housing
AS 1397-2011	Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium
AS 1391-2007	Metallic materials - Tensile testing at ambient temperature (Reconfirmed 2017)
AS 1170.4-2007	Structural design actions Earthquake actions in Australia (Reconfirmed 2018)
AS 3582.2:2016	Supplementary cementitious materials Slag - Ground granulated blast-furnace
AS/NZS 4791:2006	Hot-dip galvanized (zinc) coatings on ferrous open sections, applied by an in-line process (Reconfirmed 2017)
AS/NZS 4456.12:2003	Masonry units and segmental pavers and flags - Methods of test Determining coefficients of contraction (Reconfirmed 2023)
AS/NZS 2699.3:2002	Built-in components for masonry construction Lintels and shelf angles (durability requirements)
AS 5100.2:2017	Bridge design Design loads
AS 1672.1-1997	Limes and limestones Limes for building
AS 2601-2001	The demolition of structures
AS 4100-1998	Steel structures (Reconfirmed 2016)
AS 2193-2005	Calibration and classification of force-measuring systems (Reconfirmed 2017)
AS 1316-2003	Masonry cement (Reconfirmed 2016)
AS/NZS 4455.1:2008	Masonry units, pavers, flags and segmental retaining wall units Masonry units (Reconfirmed 2020)
AS/NZS 2312.2:2014	Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings Hot dip galvanizing
AS/NZS 1170.1:2002	Structural design actions Permanent, imposed and other actions
AS/NZS 3582.1:2016	Supplementary cementitious materials Fly ash
AS 5100.4:2017	Bridge design Bearings and deck joints
AS 5100.1:2017	Bridge design Scope and general principles
AS 4672.1:2007	Steel prestressing materials General requirements
AS 2870-2011	Residential slabs and footings
AS 2312.1:2014	Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings Paint coatings
AS 5100.5:2017	Bridge design Concrete
AS 3700 Supp 1-2012	Masonry structures - Commentary (Supplement 1 to AS 3700 - 2011)
AS/NZS 4671:2001	Steel reinforcing materials
AS/NZS 2699.2:2000	Built-in components for masonry construction Connectors and accessories
AS 4312-2008	Atmospheric corrosivity zones in Australia
AS/NZS 1170.2:2011	Structural design actions Wind actions (Reconfirmed 2016)
AS/NZS 5100.6:2017	Bridge design Steel and composite construction
AS/NZS 4534:2006	Zinc and zinc/aluminium-alloy coatings on steel wire (Reconfirmed 2017)
AS 5100.3:2017	Bridge design Foundation and soil-supporting structures

AS 2699.2:2020	Built-in components for masonry construction Connectors and accessories
AS 4312:2019	Atmospheric corrosivity zones in Australia
AS 3700:2018 Sup 1:2020	Masonry structures - Commentary (Supplement 1 to AS 3700:2018)
AS 2699.1:2020	Built-in components for masonry construction Wall ties
AS 4204:2019	Headstones and cemetery monuments
AS 2699.3:2020	Built-in components for masonry construction Lintels and shelf angles (durability requirements)
AS 4425:2020	Above‑ground burial structures

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

Shopping Cart

AS 3700:2018

Masonry Structures

Abstract

General Product Information

Scope

History

Standards Referenced By This Book

Standards Referencing This Book

Category

Subcategory