ANSI H35.2M : 2013
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
DIMENSIONAL TOLERANCES FOR ALUMINUM MILL PRODUCTS (METRIC)
Available format(s)
Hardcopy , PDF
Superseded date
09-25-2020
Superseded by
Language(s)
English
Published date
01-01-2013
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.Includes updated illustrations, removal of footnote 1, changes to the list of definitions, the addition of the definition of applicable limits, edits to the definition of mean wall thickness, editorial corrections and clarification to table headings and footnotes.
| DevelopmentNote |
Supersedes SAE MAM 2202, SAE MAM 2204 and SAE MAM 2205. (07/1999) Supersedes MIL A 52174. (05/2004)
|
| DocumentType |
Standard
|
| Pages |
60
|
| PublisherName |
Aluminum Association
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE AMS 4140 : 2014 | ALUMINUM ALLOY DIE FORGINGS, 4.0CU - 2.0NI - 0.68MG (2018-T61), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4069 : 2015 | ALUMINUM ALLOY, DRAWN, ROUND SEAMLESS TUBING, CLOSE TOLERANCE, 2.5MG - 0.25CR (5052-0) ANNEALED |
| SAE AMS 4272 : 2015 | ALUMINUM ALLOY, ALCLAD SHEET AND PLATE (ALCLAD 2029-T8) 3.6 CU, 0.30 MN, 0.95 MG, 0.40 AG, 0.12 ZR SOLUTION HEAT TREATED, COLD WORKED AND AGED |
| ASTM B 317/B317M : 2007 | Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor) |
| ASTM B 234M : 2017 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers (Metric) |
| SAE AMS 4332 : 2012 | ALUMINUM ALLOY, EXTRUDED PROFILES (7349-T76511) 8.1ZN - 1.7CU - 2.2MG - 0.16ZR SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4295 : 2013 | ALUMINUM ALLOY SHEET AND PLATE, 6.3CU - 0.30MN - 0.06TI - 0.10V - 0.18ZR (2219 - O, F, T31, T351, T37, T81, T851, T87) |
| SAE AMS 4306 : 2018 | ALUMINUM ALLOY, PLATE, 6.4ZN - 2.4MG - 2.2CU - 0.12ZR (7150-T6151), SOLUTION HEAT TREATED, STRESS RELIEVED, AND AGED |
| SAE AMS 4083 : 2012 | ALUMINUM ALLOY TUBING, HYDRAULIC, SEAMLESS, DRAWN, ROUND, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4401 : 2011 | ALUMINUM ALLOY PLATE (7140-T7451), 6.6ZN - 1.8CU - 2.0MG - 0.10ZR, SOLUTION HEAT TREATED, STRESS RELIEVED AND OVERAGED (COMPOSITION SIMILAR TO UNS A97140) |
| SAE AMS 4126 : 2010 | ALUMINUM ALLOY, DIE AND HAND FORGINGS AND ROLLED RINGS - 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7079-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4182 : 2016 | ALUMINUM ALLOY, WIRE, 5.0MG - 0.12MN - 0.12CR (5056-0), ANNEALED |
| SAE AMS 4405 : 2012 | ALUMINUM ALLOY, ALCLAD SHEET (6156-T4), 1.0SI - 0.90CU - 0.60MN - 0.90MG, SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE AMS 4184 : 2016 | FILLER METAL, ALUMINUM BRAZING, 10SI - 4.0CU (4145) |
| SAE AMS 4046 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD ONE SIDE 5.6ZN - 2.5MG - 1.6CU - 0.23CR (ALCLAD ONE SIDE 7075; -T6 SHEET -T651 PLATE) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4465 : 2015 | ALUMINUM ALLOY, CLAD ONE SIDE SHEET, 0.6MG - 0.35SI - 0.28CU (NO. 23 BRAZING SHEET), AS FABRICATED |
| SAE AMS 4203 : 2012 | ALUMINUM ALLOY, PLATE, 6.2ZN - 1.8CU - 2.4MG - 0.13ZR (7010-T7351) SOLUTION HEAT TREATED, STRESS RELIEVED AND PRECIPITATION HEAT TREATED (COMPOSITION SIMILAR TO UNS A97010) |
| SAE AMS 4064 : 2013 | ALUMINUM ALLOY, CLAD TWO SIDES SHEET, 1.25MN - 0.12CU (NO. 12-0 BRAZING SHEET), ANNEALED |
| SAE AMS 4299 : 2018 | ALUMINUM ALLOY, PLATE (7449-T7951), 8.1ZN - 1.8CU - 2.3MG SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4324 : 2016 | ALUMINUM ALLOY, EXTRUDED ROD, BAR AND PROFILES (7055-T74511), 8.0ZN - 2.3CU - 2.0MG - 0.16ZR, SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| FED-STD-245 Revision E:1985 | TOLERANCES FOR ALUMINUM ALLOY AND MAGNESIUM ALLOY WROUGHT PRODUCTS |
| SAE AMS 4330 : 2018 | ALUMINUM ALLOY, PLATE (2297-T87), 2.8CU - 1.5LI - 0.30MN - 0.12ZR, SOLUTION HEAT TREATED, STRETCHED, AND ARTIFICIALLY AGED |
| SAE AMS 4416 : 2017 | ALUMINUM ALLOY, EXTRUDED PROFILES (2196-T8511) 2.9CU - 1.7LI - 0.4MG - 0.4AG - 0.10ZR SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING AND ARTIFICIALLY AGED |
| SAE AMS 4276 : 2018 | ALUMINUM ALLOY, SHEET - 4.4CU - 1.5MG - 0.60MN (2024-O) ANNEALED, FINE GRAINED |
| SAE AMS 4077 : 2015 | ALUMINUM ALLOY SHEET AND PLATE, ALCLAD ONE SIDE, 4.4CU - 1.5MG - 0.60MN (CLAD ONE SIDE 2024-O), ANNEALED |
| SAE AMS 4473 : 2017 | ALUMINUM ALLOY PLATE (2624-T39), 4.1CU - 1.4MG - 0.6MN, SOLUTION HEAT TREATED, COLD WORKED AND NATURALLY AGED |
| SAE AMS 4462 : 2018 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD, 4.4CU - 1.5MG - 0.60MN (ALCLAD 2024, -T3 SHEET, -T351 PLATE), SOLUTION HEAT TREATED, COLD WORKED AND NATURALLY AGED |
| SAE AMS 4015 : 2018 | ALUMINUM ALLOY, SHEET AND PLATE 2.5MG - 0.25CR (5052-O) ANNEALED |
| SAE AMS 4162 : 2014 | ALUMINUM ALLOY, EXTRUSIONS, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-T8511), SOLUTION TREATED, STRESS RELIEF STRETCHED, STRAIGHTENED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4365 : 2017 | ALUMINUM ALLOY, PLATE, 7.9ZN - 1.2CU - 2.1MG - 0.10ZR (7097-T7651) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4345 : 2012 | ALUMINUM ALLOY, EXTRUSIONS - 6.4ZN - 2.4MG - 2.2CU - 0.12ZR (7150-T77511) SOLUTION HEAT TREATED, STRESS-RELIEVED, STRAIGHTENED, AND OVERAGED |
| SAE AMS 4133 : 2014 | ALUMINUM ALLOY FORGINGS AND ROLLED RINGS, 4.4CU - 0.85SI - 0.80MN - 0.50MG (2014-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4374 : 2016 | ALUMINUM ALLOY, EXTRUDED PROFILES, 8.9ZN - 2.2CU - 2.2MG - 0.15ZR (7136-T73511), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, STRAIGHTENED, AND OVERAGED |
| SAE AMS 4344 : 2011 | ALUMINUM ALLOY, EXTRUSIONS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7175-T73511), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, STRAIGHTENED, AND OVERAGED |
| SAE AMS 4353 : 2014 | ALUMINUM ALLOY, EXTRUDED ROUND ROD, 3.5CU - 1.0LI - 0.40MG - 0.45AG - 0.12ZR (2050-T84) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND ARTIFICIALLY AGED |
| SAE AMS 4350 : 2017 | MAGNESIUM ALLOY, EXTRUSIONS 6.5A1 - 0.95ZN (AZ61A-F) AS EXTRUDED |
| SAE AMS 4357 : 2016 | ALUMINUM ALLOY, DIE FORGINGS 3.5CU - 1.0LI - 0.04MG - 0.35MN - 0.45AG - 0.12ZR (2050-T852) SOLUTION HEAT TREATED, COLD WORKED AND ARTIFICIALLY AGED |
| SAE AMS 4213 : 2016 | ALUMINUM ALLOY PLATE (2027-T351) 4.4CU - 1.2MG - 0.8MN - 0.10ZR, SOLUTION HEAT TREATED, COLD WORKED AND NATURALLY AGED |
| SAE AMS 4268 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN; (2024-T81 SHEET, -T851 PLATE), SOLUTION HEAT TREATED, COLD WORKED AND ARTIFICIALLY AGED |
| SAE AMS 4601 : 2017 | Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr Solution Heat Treated, Cold Worked and Naturally Aged (2219 -T31/-T351) |
| SAE AMS 4415 : 2015 | ALUMINUM ALLOY EXTRUSIONS, 8.9ZN - 2.2CU - 2.2MG - 0.15ZR (7136-T76511, -T76510) SOLUTION HEAT TREATED, STRESS-RELIEVED, STRAIGHTENED, AND OVERAGED |
| SAE AMS 4459 : 2013 | ALUMINUM ALLOY, EXTRUSION, 2.7CU - 1.8LI - 0.7ZN - 0.3MN - 0.3MG - 0.08ZR (2099-T81), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING 1 TO 3% AND AGED |
| SAE AMS 4044 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, 5.6ZN - 2.5MG - 1.6CU - 0.23CR, ANNEALED (7075-O), OR WHEN SPECIFIED, 'AS FABRICATED' (7075-F) |
| SAE AMS 4096 : 2016 | ALUMINUM ALLOY SHEET AND PLATE, ALCLAD, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (ALCLAD 2219-O), ANNEALED |
| SAE AMS 4287 : 2013 | ALUMINUM ALLOY, EXTRUSION, 2.7 CU - 1.8 LI - 0.7 ZN - 0.3 MN - 0.3 MG - 0.08 ZR (2099-T83), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING 1% TO 4% AND AGED |
| ASTM B 317/B317M : 2007 : R2015 : EDT 1 | Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor) |
| ASTM B 491/B491M : 2015 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications |
| ASTM B 317/B317M : 2007 : R2015 | Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor) |
| ASTM B 316/B316M : 2015 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods |
| SAE AMS 4468 : 2012 | ALUMINUM ALLOY, PLATE, 5.0CU - 0.4MN - 0.5MG - 0.4AG (2139-T84), SOLUTION HEAT TREATED, COLD WORKED, AND ARTIFICIALLY AGED (COMPOSITION SIMILAR TO UNS A92139) |
| SAE AMS 4035 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN (2024-0) ANNEALED; OR WHEN SPECIFIED, 'AS FABRICATED' (2024-F) |
| SAE AMS 4113 : 2014 | ALUMINUM ALLOY, EXTRUDED PROFILES 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4315 : 2017 | ALUMINUM ALLOY SHEET AND PLATE, 5.6ZN - 2.5MG - 1.6CU - 0.23CR, 7075: (-T76 SHEET, -T7651 PLATE), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4066 : 2013 | ALUMINUM ALLOY, DRAWN, ROUND SEAMLESS TUBING 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI - (2219-T8511) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING AND PRECIPITATION HEAT TREATED |
| SAE AMS 4116 : 2015 | ALUMINUM ALLOY, BARS, RODS, AND WIRE, 1.0MG - 0.60SI - 0.30CU - 0.20CR (6061-T4), COLD FINISHED, SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE AMS 4172 : 2013 | ALUMINUM ALLOY, EXTRUSIONS 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T4511 OR T4510) SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| SAE AMS 4274 : 2013 | ALUMINUM ALLOY, ALCLAD SHEET, 4.4CU - 1.5MG - 0.60MN (ALCLAD 2024-0), ANNEALED, FINE GRAIN |
| SAE AMS 4466 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD, 4.4CU - 1.5MG - 0.60MN (ALCLAD 2024, -T361 SHEET & PLATE), SOLUTION HEAT TREATED, 6% COLD WORKED AND NATURALLY AGED |
| AASHTO M 197 : 2006 | SPECIFICATION FOR ALUMINUM ALLOY SHEET FOR CORRUGATED ALUMINUM PIPE |
| SAE AMS 4256 : 2018 | ALUMINUM ALLOY, CLAD TWO SIDES SHEET - 0.6MG - 0.35SI - 0.28CU (NO. 22 BRAZING SHEET) AS FABRICATED |
| SAE AMS 4269 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN; (2024-T361), SOLUTION HEAT TREATED AND COLD WORKED |
| SAE AMS 4341 : 2011 | ALUMINUM ALLOY, EXTRUSIONS, 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (7050-T73511), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, STRAIGHTENED, AND OVERAGED |
| SAE AMS 4303 : 2017 | ALUMINUM ALLOY PLATE, 2.7CU - 2.2LI - 0.12ZR (2090-T81), SOLUTION HEAT TREATED, COLD WORKED, AND AGED |
| SAE AMS 4296 : 2017 | ALUMINUM ALLOY, ALCLAD SHEET AND PLATE 4.3CU - 1.4MG - 0.60MN (ALCLAD 2524-T3) SOLUTION HEAT TREATED AND COLD WORKED |
| SAE AMS 4351 : 2014 | ALUMINUM ALLOY, PLATE (7065-T7651) 7.7ZN - 2.1CU - 1.65MG - 0.10ZR SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4081 : 2014 | ALUMINUM ALLOY TUBING, HYDRAULIC, SEAMLESS, DRAWN, ROUND, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T4) SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE AMS 4476 : 2013 | ALUMINUM ALLOY, EXTRUSIONS 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-O), ANNEALED |
| SAE AMS 4409 : 2013 | ALUMINUM ALLOY, PLATE, 4.0ZN - 2.0MG - 0.32MN (7019-T651), SOLUTION HEAT TREATED, STRESS RELIEVED AND ARTIFICIALLY AGED |
| SAE AMS 4148 : 2017 | ALUMINUM ALLOY DIE FORGINGS (7175-T66) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4094 : 2018 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI ALCLAD 2219-T81 SHEET SOLUTION HEAT TREATED, COLD WORKED, AND PRECIPITATION HEAT TREATED ALCLAD 2219-T851 PLATE SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4361 : 2014 | ALUMINUM ALLOY, PLATE (7065-T7451) 7.7ZN - 2.1CU - 1.65MG - 0.10ZR SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4128 : 2013 | ALUMINUM ALLOY BARS, ROLLED OR COLD FINISHED, 1.0MG - 0.60SI - 0.30CU - 0.20CR (6061-T451), SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| SAE AMS 4469 : 2013 | ALUMINUM ALLOY TUBING, SEAMLESS, DRAWN, 1.8 CU - 1.0 MG - 0.8 SI - 0.20 CR, SOLUTION HEAT TREATED, STRESS-RELIEVED BY STRETCHING, AND AGED (2013-T4511) |
| SAE AMS 4617 : 2017 | ALUMINUM ALLOY, EXTRUSIONS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T73, 7075-T73511, 7075-T73510), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING WHEN REQUIRED, AND OVERAGED |
| SAE AMS 4208 : 2016 | ALUMINUM ALLOY SHEET, 6.0CU - 0.40ZR - (2004-F), AS ROLLED |
| SAE AMS 4121 : 2017 | ALUMINUM ALLOY BARS, RODS, AND WIRE, ROLLED, DRAWN, OR COLD FINISHED, 4.5CU - 0.85SI - 0.80MN - 0.50MG (2014-T6, -T651), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4048 : 2016 | ALUMINUM ALLOY SHEET AND PLATE, ALCLAD 5.6ZN - 2.5MG - 1.6CU - 0.23CR (ALCLAD 7075-O) ANNEALED OR WHEN SPECIFIED, 'AS FABRICATED' (ALCLAD 7075-F) |
| SAE AMS 4050 : 2014 | ALUMINUM ALLOY, PLATE, 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (7050-T7451), SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4202 : 2005 | ALUMINUM ALLOY, PLATE - 5.7ZN - 2.2MG - 1.6CU - 0.22CR (7475-T7351), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4111 : 2014 | ALUMINUM ALLOY FORGINGS, 7.7ZN - 2.5MG - 1.5CU - 0.16CR (7049-T73), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4298 : 2016 | ALUMINUM ALLOY, ALCLAD SHEET 3.8CU - 1.0MG - 0.30MN - 0.60ZN (ALCLAD 2056-T3) SOLUTION HEAT TREATED AND COLD WORKED |
| SAE AMS 4216 : 2013 | ALUMINUM ALLOY, SHEET, 1.0MG - 0.8SI - 0.8CU - 0.50MN, (6013-T6), SOLUTION HEAT TREATED AND ARTIFICIALLY AGED |
| SAE AMS 4320 : 2014 | ALUMINUM ALLOY FORGINGS, 7.7ZN - 2.5MG - 1.5CU - 0.16CR (7149-T73), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4194 : 2018 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 4.4CU - 1.5MG - 0.60MN (2024 -T361 SHEET/PLATE WITH 1-1/2% ALCLAD) SOLUTION HEAT TREATED, 6% COLD WORKED AND NATURALLY AGED |
| ASTM B 236M : 2007 : R2015 | Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) (Metric) (Withdrawn 2024) |
| SAE AMS 4464 : 2017 | ALUMINUM ALLOY PLATE (2624-T351) 4.1CU - 1.4MG - 0.6MN, SOLUTION HEAT TREATED, COLD WORKED AND NATURALLY AGED |
| SAE AMS 4329 : 2017 | ALUMINUM ALLOY, PLATE (7085-T7651), 7.5ZN - 1.6CU - 1.5MG - 0.12ZR, SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4036 : 2017 | ALUMINUM ALLOY SHEET AND PLATE, ALCLAD ONE SIDE 4.4CU - 1.5MG - 0.60MN ALCLAD ONE SIDE 2024 AND 1-1/2% ALCLAD ONE SIDE 2024-T3 SHEET; 1-1/2% ALCLAD ONE SIDE 2024-T351 PLATE |
| SAE AMS 4143 : 2012 | ALUMINUM ALLOY FORGINGS AND ROLLED OR FORGED RINGS, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS4204C | ALUMINUM ALLOY, PLATE, 6.2ZN - 1.8CU - 2.4MG - 0.13ZR (7010-T7651), SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4257 : 2014 | ALUMINUM ALLOY, EXTRUSION 3.7CU - 1.15LI - 0.5ZN - 0.45AG - 0.4MG - 0.3MN - 0.1ZR (2055-T84) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING 2% TO 5% AND AGED |
| ASTM B 211M : 2012 : EDT 1 | Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and Wire (Metric) (Withdrawn 2019) |
| ASTM B 236M : 2007 | Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric] |
| SAE AMS 4472 : 2017 | ALUMINUM ALLOY, PLATE, 4.0CU - 1.0LI - 0.40MG - 0.35AG - 0.13ZR (2195-T34), SOLUTION HEAT TREATED AND STRESS RELIEVED |
| SAE AMS 4319 : 2013 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED, BARS AND RODS 12.2SI - 1.0MG - 0.90CU - 0.90NI (4032-T651) SOLUTION HEAT TREATED, STRESS-RELIEVED, AND ARTIFICIALLY AGED |
| SAE AMS 4403 : 2017 | ALUMINUM ALLOY, DIE FORGINGS, 7.5ZN - 1.6CU - 1.5MG - 0.12ZR (7085-T7452), SOLUTION HEAT TREATED, COMPRESSION STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4410 : 2013 | ALUMINUM ALLOY PLATE (7081-T7451), 7.2ZN - 1.5CU - 2.0MG - 0.10ZR, SOLUTION HEAT TREATED, STRESS RELIEVED AND OVERAGED |
| SAE AMS 4115 : 2015 | ALUMINUM ALLOY, ROLLED OR COLD-FINISHED, BARS, RODS, WIRE, AND FLASH WELDED RINGS, ANNEALED, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-O) |
| SAE AMS 4078 : 2011 | ALUMINUM ALLOY SHEET AND PLATE, 5.6ZN - 2.5MG - 1.6CU - 0.23CR, 7075: (-T73 SHEET, -T7351 PLATE), SOLUTION HEAT TREATED AND OVERAGED |
| SAE AMS 4458 : 2016 | ALUMINUM ALLOY, PLATE (2.7 CU - 1.8 LI - 0.7 ZN) 2099-T86, SOLUTION HEAT TREATED, COLD WORKED AND ARTIFICIALLY AGED |
| SAE AMS 4278 : 2013 | ALUMINUM ALLOY, ALCLAD SHEET 5.6ZN - 2.5MG - 1.6CU - 0.23CR (ALCLAD 7075-0) ANNEALED, FINE GRAINED |
| SAE AMS 4173 : 2013 | ALUMINUM ALLOY, EXTRUSIONS 1.0MG - 0.60SI - 0.30CU - 0.20CR (6061-T6511 OR T6510) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, STRAIGHTENED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4325 : 2013 | ALUMINUM ALLOY, EXTRUDED WIDE PANEL PROFILES (7150-T77511), 6.4ZN - 2.4MG - 2.2CU - 0.12ZR, SOLUTION HEAT TREATED, STRESS-RELIEVED, STRAIGHTENED AND OVERAGED |
| SAE AMS 4200 : 2017 | ALUMINUM ALLOY PLATE, 7.7ZN - 2.4MG - 1.6CU - 0.16CR (7049-T7351), SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4277 : 2018 | ALUMINUM ALLOY, SHEET - 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-O) ANNEALED, FINE GRAINED |
| SAE AMS 4412 : 2015 | ALUMINUM ALLOY, SHEET, 3.2CU - 0.52MG - 0.30AG - 0.12ZR (2198-T8), SOLUTION HEAT TREATED, COLD WORKED, AND ARTIFICIALLY AGED |
| SAE AMS 4339 : 2018 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS AND RODS 4.4CU - 1.5MG - 0.60MN (2024-T-851) SOLUTION HEAT TREATED, COLD WORKED, AND ARTIFICIALLY AGED |
| SAE AMS 4343 : 2012 | ALUMINUM ALLOY, EXTRUSIONS, 7.7ZN - 2.4MG - 1.6CU - 0.16CR, (7149-T73511) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND OVERAGED |
| SAE AMS 4252 : 2012 | ALUMINUM ALLOY, PLATE - 6.4ZN - 2.4MG - 2.2CU - 0.12ZR (7150-T7751), SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4154 : 2015 | ALUMINUM ALLOY, EXTRUSIONS 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T6, 7075-T6510, 7075-T6511) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING WHEN REQUIRED AND PRECIPITATION HEAT TREATED |
| SAE AMS 4079 : 2017 | ALUMINUM ALLOY, DRAWN, ROUND, SEAMLESS, TUBING, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-O), CLOSE TOLERANCE, ANNEALED |
| SAE AMS 4186 : 2012 | ALUMINUM ALLOY, BARS, RODS, AND WIRE, ROLLED OR COLD FINISHED, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-F), AS FABRICATED OR WHEN SPECIFIED, ANNEALED (7075-O) |
| SAE AMS 4193 : 2017 | ALUMINUM ALLOY SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN (2024-T861), SOLUTION HEAT TREATED, COLD WORKED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4002 : 2018 | ALUMINUM ALLOY TUBING, SEAMLESS, DRAWN 1.8CU - 1.0MG - 0.8SI - 0.20CR SOLUTION HEAT TREATED, STRESS-RELIEVED BY STRETCHING, AND AGED (2013-T6511) |
| SAE AMS 4293 : 2013 | ALUMINUM ALLOY EXTRUSIONS, 7.9ZN - 1.6CU - 2.2MG - 0.16CR (7249-T76511), SOLUTION HEAT TREATED, STRESS-RELIEVED, STRAIGHTENED, AND OVERAGED |
| SAE AMS 4183 : 2016 | ALUMINUM ALLOY, EXTRUDED PROFILES (2027-T3511) 4.4CU - 1.2MG - 0.8MN - 0.10ZR, SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| SAE AMS 4209 : 2016 | ALUMINUM ALLOY SHEET, ALCLAD, 6.0CU - 0.40ZR - (2004-F), AS ROLLED |
| SAE AMS 4331 : 2014 | ALUMINUM ALLOY EXTRUSIONS 7.8ZN - 2.6MG - 2.0CU - 0.10ZR - (7068-T6511) SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4070 : 2015 | ALUMINUM ALLOY, DRAWN, ROUND SEAMLESS TUBING, 2.5MG - 0.25CR (5052-O), ANNEALED |
| SAE AMS 4027 : 2014 | ALUMINUM ALLOY, SHEET AND PLATE, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061; -T6 SHEET, -T651 PLATE), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4160 : 2013 | ALUMINUM ALLOY, EXTRUSIONS 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-0), ANNEALED |
| SAE AMS 4251 : 2017 | ALUMINUM ALLOY SHEET, 2.7CU - 2.2LI - 0.12ZR (2090-T83), SOLUTION HEAT TREATED, COLD WORKED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4411 : 2013 | ALUMINUM ALLOY PLATE (7081-T7651), 7.2ZN - 1.5CU - 2.0MG - 0.10ZR, SOLUTION HEAT TREATED, STRESS RELIEVED AND OVERAGED |
| SAE AMS 4045 : 2016 | ALUMINUM ALLOY SHEET AND PLATE 5.6ZN - 2.5MG - 1.6CU - 0.23CR 7075: (-T6 SHEET, -T651 PLATE) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4479 : 2015 | ALUMINUM ALLOY, EXTRUDED PROFILES (2824-T3511) 4.0CU - 1.35MG - 0.7MN SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| SAE AMS 4127 : 2012 | ALUMINUM ALLOY, FORGINGS AND ROLLED OR FORGED RINGS, (6061-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4463 : 2017 | ALUMINUM ALLOY, PLATE (7255-T7751) 8.0ZN - 2.3CU - 2.0MG - 0.12ZR, SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4084 : 2017 | ALUMINUM ALLOY SHEET, 5.7ZN - 2.2MG - 1.6CU - 0.22CR (7475-T61), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4026 : 2014 | ALUMINUM ALLOY, SHEET AND PLATE, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061; -T4 SHEET, -T451 PLATE), SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE AMS 4101 : 2018 | ALUMINUM ALLOY, PLATE, 4.4CU - 1.5MG - 0.60MN (2124-T851), SOLUTION HEAT TREATED, STRETCHED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4017 : 2018 | ALUMINUM ALLOY SHEET AND PLATE, 2.5MG - 0.25CR, (5052-H34), STRAIN-HARDENED, HALF-HARD, AND STABILIZED |
| SAE AMS 4371 : 2015 | MAGNESIUM ALLOY, PLATE, 4.0Y - 2.25ND - 0.5ZR (WE43C - T5), PRECIPITATION HEAT TREATED |
| SAE AMS 4130 : 2014 | ALUMINUM ALLOY DIE FORGINGS, 4.4CU - 0.85SI - 0.80MN (2025-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4327 : 2016 | ALUMINUM ALLOY, PLATE (2098-O), 3.5CU - 1.1LI - 0.50MG - 0.40AG - 0.11ZR, ANNEALED |
| SAE AMS 4157 : 2018 | ALUMINUM ALLOY EXTRUSIONS, 7.7ZN - 2.4MG - 1.6CU - 0.16CR (7049-T73511), SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4165 : 2013 | ALUMINUM ALLOY, EXTRUSIONS, 4.4CU - 1.5MG - 0.60MN (2024-T3511), SOLUTION HEAT TREATED, STRESS-RELIEVED BY STRETCHING, AND STRAIGHTENED |
| SAE AMS 4122 : 2012 | ALUMINUM ALLOY BARS, RODS, AND WIRE ROLLED OR COLD FINISHED, AND RINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T6, 7075-T651), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4255 : 2012 | ALUMINUM ALLOY, CLAD ONE SIDE SHEET - 0.6MG - 0.35SI - 0.28CU (NO. 21 BRAZING SHEET) AS FABRICATED |
| SAE AMS 4205 : 2015 | ALUMINUM ALLOY, PLATE 6.2ZN - 1.8CU - 2.4MG - 0.13ZR (7010-T7451) SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4347 : 2014 | ALUMINUM ALLOY SHEET, 1.0MG - 0.8SI - 0.8CU - 0.5MN (6013-T4), SOLUTION HEAT TREATED AND NATURALLY AGED |
| ASTM B 744/B744M : 2015 : REDLINE | Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe |
| SAE AMS 4354 : 2016 | ALUMINUM ALLOY, PLATE, 7.9ZN - 1.8CU - 2.0MG - 0.10ZR (7099-T7451) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4414 : 2013 | ALUMINUM ALLOY, HAND FORGINGS, 7.5ZN - 1.6CU - 1.5MG - 0.12ZR (7085-T7452), SOLUTION HEAT TREATED, COMPRESSION STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4090 : 2015 | ALUMINUM ALLOY, PLATE 5.7ZN - 2.2MG - 1.6CU - 0.22CR (7475-T651) SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4159 : 2015 | ALUMINUM ALLOY, EXTRUSIONS 7.7ZN - 2.4MG - 1.6CU - 0.16CR (7049-T76511) SOLUTION HEAT TREATED, STRESS RELIEVED, STRAIGHTENED, AND OVERAGED |
| SAE AMS 4599 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, 6.3CU - 0.30MN - 0.06TI - 0.10V - 0.18ZR, SOLUTION AND PRECIPITATION HEAT TREATED (2219 -T81/-T851) |
| ASTM B 928/B928M : 2015 : REDLINE | Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments |
| ASTM B 483/B483M : 2013 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Pipe for General Purpose Applications |
| SAE AMS 4232 : 2012 | ALUMINUM ALLOY EXTRUSIONS, 2.7CU - 2.2LI - 0.12ZR (2090-T86), SOLUTION HEAT TREATED, COLD WORKED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4460 : 2015 | ALUMINUM ALLOY, CLAD TWO SIDES SHEET, 0.6MG - 0.35SI - 0.28CU (NO. 24 BRAZING SHEET), AS FABRICATED |
| SAE AMS 4163 : 2017 | ALUMINUM ALLOY, EXTRUSIONS 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-T3511) SOLUTION HEAT TREATED, STRESS-RELIEVED BY STRETCHING, AND STRAIGHTENED |
| SAE AMS 4336 : 2013 | ALUMINUM ALLOY, EXTRUDED ROD, BAR, AND PROFILES (7055-T76511) - 8.0ZN - 2.3CU - 2.0MG - 0.16ZR - SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4342 : 2018 | ALUMINUM ALLOY, EXTRUSIONS, 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (7050-T74511), SOLUTION HEAT TREATED, STRESS RELIEVED, STRAIGHTENED, AND OVERAGED |
| SAE AMS 4364 : 2016 | ALUMINUM ALLOY, PLATE, 7.9ZN - 1.8CU - 2.0MG - 0.10ZR (7099-T7651) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4211 : 2012 | ALUMINUM ALLOY, PLATE, 6.2ZN - 1.9CU - 2.1MG - 0.10ZR (7040-T7451) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4474 : 2015 | ALUMINUM ALLOY, SHEET AND PLATE, 4.0CU - 1.0LI - 0.40MG - 0.35AG - 0.13ZR (2195-T8), SOLUTION HEAT TREATED, COLD WORKED, AND ARTIFICIALLY AGED |
| SAE AMS 4089 : 2014 | ALUMINUM ALLOY, PLATE 1.6CU - 2.2MG - 0.22CR - 5.7ZN (7475-T7651) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4068 : 2015 | ALUMINUM ALLOY, DRAWN SEAMLESS TUBING, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-T3511), SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| SAE AMS 4477 : 2017 | ALUMINUM ALLOY, COILED SHEET, 4.4CU - 1.5MG - 0.60MN (2024-T4), SOLUTION TREATED |
| SAE AMS 4071 : 2017 | ALUMINUM ALLOY, DRAWN, ROUND, SEAMLESS HYDRAULIC TUBING, 2.5MG - 0.25CR (5052-O), ANNEALED |
| SAE AMS 4413 : 2012 | ALUMINUM ALLOY, PLATE, 3.5 CU - 1.0LI - .40MG - .35 MN - .45AG - 0.12ZR (2050-T84), SOLUTION HEAT TREATED, STRESS RELIEVED, AND ARTIFICIALLY AGED |
| SAE AMS 4461 : 2012 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD, 4.4CU - 1.5MG - 0.60MN (ALCLAD 2024-O, SHEET AND PLATE) ANNEALED; OR WHEN SPECIFIED, 'AS FABRICATED' (2024-F) |
| ASTM C 1423 : 2016 : REDLINE | Standard Guide for Selecting Jacketing Materials for Thermal Insulation |
| SAE AMS 4118 : 2014 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE, 4.0CU - 0.70MN - 0.60MG - 0.50SI (2017; -T4, -T451), SOLUTION HEAT TREATED |
| SAE AMS 4404 : 2014 | ALUMINUM ALLOY, EXTRUDED PROFILES (6056-T4511), 1.0SI - 0.90MG - 0.80CU - 0.60MN - 0.40ZN, SOLUTION HEAT TREATED AND STRESS-RELIEVED BY STRETCHING |
| SAE AMS 4016 : 2013 | ALUMINUM ALLOY, SHEET AND PLATE, 2.5MG - 0.25CR (5052-H32), STRAIN HARDENED, QUARTER-HARD, AND STABILIZED |
| SAE AMS 4063 : 2013 | ALUMINUM ALLOY, CLAD ONE SIDE SHEET, 1.25MN - 0.12CU (NO. 11-0 BRAZING SHEET), ANNEALED |
| SAE AMS 4333 : 2015 | ALUMINUM ALLOY, DIE FORGINGS 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (7050-T7452) SOLUTION HEAT TREATED, COMPRESSION STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4025 : 2014 | ALUMINUM ALLOY, SHEET AND PLATE, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-O) ANNEALED |
| SAE AMS4221E : 2016 | ALUMINUM ALLOY, PLATE, 4.4CU - 1.5MG - 0.60MN (2124-T8151) SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4149 : 2016 | ALUMINUM ALLOY, DIE AND HAND FORGINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7175-T74), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4375 : 2017 | SHEET AND PLATE, MAGNESIUM ALLOY - 3.0AL - 1.0ZN - 0.20MN (AZ31B-0) ANNEALED AND RECRYSTALLIZED |
| SAE AMS 4120 : 2018 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE, 4.4CU - 1.5MG - 0.60MN (2024), SOLUTION HEAT TREATED AND NATURALLY AGED (T4), SOLUTION HEAT TREATED, COLD WORKED, AND NATURALLY AGED (T351) |
| SAE AMS 4470 : 2012 | ALUMINUM ALLOY, PLATE (7085-T7451), 7.5ZN - 1.6CU - 1.5MG - 0.12ZR, SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4041 : 2012-07 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 4.4CU - 1.5MG - 0.60MN (2024, -T3 SHEET/-T351 PLATE WITH 1-1/2% ALCLAD) SOLUTION HEAT TREATED, COLD WORKED AND NATURALLY AGED |
| SAE AMS 4475 : 2017 | Aluminum Alloy, Coiled Sheet, Alclad 4.4Cu – 1.5Mg – 0.60Mn (Alclad 2024; -T4 Coiled Sheet) Solution Heat Treated |
| SAE AMS 3025 : 2018 | POLYALKYLENE GLYCOL HEAT TREAT QUENCHANT |
| SAE AMS 4467 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 4.4CU 1.5MG 0.60MN (ALCLAD 2024, -T861 SHEET & PLATE) SOLUTION HEAT TREATED, 6% COLD WORKED AND ARTIFICIALLY AGED |
| SAE AMS 4366 : 2014 | ALUMINUM ALLOY, EXTRUDED PROFILES (2065-T84) 4.2CU - 1.2LI - 0.52MG - 0.32MN - 0.32AG - 0.1ZR SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING AND ARTIFICIALLY AGED |
| SAE AMS 4179 : 2016 | ALUMINUM ALLOY FORGINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7175-T7452), SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| ASTM B 241/B241M : 2016 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube |
| SAE AMS 4117 : 2015 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE AND FLASH WELDED RINGS, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061; -T6, -T651) |
| SAE AMS 4161 : 2013 | ALUMINUM ALLOY, EXTRUSIONS 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T4) SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE AMS 4243 : 2014 | ALUMINUM ALLOY, ALCLAD SHEET 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (ALCLAD 7050-T76) SOLUTION HEAT TREATED AND OVERAGED |
| ASTM B 211M : 2012 | Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and Wire (Metric) |
| SAE AMS 4359 : 2016 | ALUMINUM ALLOY, EXTRUDED PROFILES (2395-T84), 3.95CU - 1.15LI - 0.3AG - 0.5MG - 0.1ZR, SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND AGED |
| ASTM B 313M : 1988 | Specification for Aluminum and Aluminum-Alloy Round Welded Tubes (Metric) (Withdrawn 1990) |
| ASTM C 1729M : 2017 : REDLINE | Standard Specification for Aluminum Jacketing for Insulation |
| SAE AMS 4037 : 2014 | ALUMINUM ALLOY, SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN (2024; -T3 FLAT SHEET, -T351 PLATE) SOLUTION HEAT TREATED |
| SAE AMS 4206 : 2017 | ALUMINUM ALLOY, PLATE (7055-T7751), 8.0ZN - 2.3CU - 2.0MG - 0.16ZR, SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4080 : 2016 | ALUMINUM ALLOY, DRAWN SEAMLESS TUBING, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-0), ANNEALED |
| SAE AMS 4088 : 2015 | ALUMINUM ALLOY, DRAWN, SEAMLESS TUBING 4.4CU - 1.5MG - 0.60MN (2024-T3) SOLUTION HEAT TREATED AND COLD WORKED |
| SAE AMS 4095 : 2018 | ALUMINUM ALLOY, ALCLAD SHEET AND PLATE 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI ALCLAD 2219-T31; SHEET, SOLUTION HEAT TREATED AND COLD WORKED ALCLAD 2219-T351; PLATE, SOLUTION HEAT TREATED AND STRESS RELIEVED |
| SAE AMS 4040 : 2018 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 4.4CU - 1.5MG - 0.60MN (2024-O WITH 1-1/2% ALCLAD); ANNEALED |
| SAE AMS 4164 : 2013 | ALUMINUM ALLOY, EXTRUSIONS, 4.4CU - 1.5MG - 0.60MN (2024-T3510), STRESS-RELIEF STRETCHED, UNSTRAIGHTENED |
| SAE AMS 4125 : 2014 | Aluminum Alloy Die Forgings, and Rolled or Forged Rings 0.9Si - 0.62Mg - 0.25Cr (6151-T6) Solution and Precipitation Heat Treated |
| ASTM B 209M : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric) |
| SAE AMS 4338 : 2007 | ALUMINUM ALLOY, EXTRUSIONS, 4.0CU - 1.3MG - 0.60MN (2026-T3511), SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| SAE AMS 4250 : 2018 | ALUMINUM ALLOY, PLATE - 8.1ZN - 2.3MG - 1.0CU - ZR (7449-T7651) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4372 : 2018 | ALUMINUM ALLOY, PLATE, 3.5CU - 1.0LI - 0.40MG - 0.35MN - 0.45AG - 0.12ZR (2050-T34), SOLUTION HEAT TREATED AND STRESS RELIEVED |
| SAE AMS 4352J : 2017 | MAGNESIUM ALLOY, EXTRUSIONS, 5.5ZN - 0.45ZR (ZK60A - T5), PRECIPITATION HEAT TREATED |
| SAE AMS 4124 : 2012 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE - 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T7351), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND OVERAGED |
| SAE AMS 4132 : 2013 | ALUMINUM ALLOY, DIE AND HAND FORGINGS, ROLLED RINGS, AND FORGING STOCK, 2.3CU - 1.6MG - 1.1FE - 1.0NI - 0.18SI - 0.07TI (2618-T61), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4307 : 2017 | ALUMINUM ALLOY, EXTRUSIONS, 6.4ZN - 2.4MG - 2.2CU - 0.12ZR (7150-T61511), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, STRAIGHTENED, AND PRECIPITATION HEAT TREATED |
| ASTM B 483/B483M : 2013 : EDT 1 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications |
| SAE AMS 4100 : 2016 | ALUMINUM ALLOY, ALCLAD, SHEET, 5.7ZN - 2.2MG - 1.6CU - 0.22CR (ALCLAD 7475-T761), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4029 : 2012 | ALUMINUM ALLOY SHEET AND PLATE (2014; -T6 SHEET, -T651 PLATE) SOLUTION AND PRECIPITATION HEAT TREATED (COMPOSITION SIMILAR TO UNS A92014) |
| SAE AMS 4195 : 2016 | ALUMINUM ALLOY SHEET AND PLATE, ALCLAD, 4.4CU - 1.5MG - 0.60MN (ALCLAD 2024 AND 1-1/2% ALCLAD 2024-T861 FLAT SHEET; 1-1/2% ALCLAD 2024-T861 PLATE), SOLUTION HEAT TREATED, COLD WORKED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4207 : 2012 | ALUMINUM ALLOY SHEET, ALCLAD, 5.7ZN - 2.2MG - 1.6CU - 0.22CR (7475-T61) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4457 : 2014 | ALUMINUM ALLOY, SHEET 3.5CU - 1.1LI - 0.50MG - 0.40AG - 0.12ZR (2098-T8) SOLUTION HEAT TREATED, COLD WORKED, AND ARTIFICIALLY AGED |
| SAE AMS 4082 : 2014 | ALUMINUM ALLOY, SEAMLESS DRAWN TUBING, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4613 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, 6.3CU - 0.30MN - 0.06TI - 0.10V - 0.18ZR, SOLUTION HEAT TREATED, COLD WORKED (8%) AND PRECIPITATION HEAT TREATED (2219 -T87) |
| SAE AMS 4480 : 2015 | ALUMINUM ALLOY, SEAMLESS DRAWN TUBING 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T4) SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE AMS 4031 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-O) ANNEALED OR WHEN SPECIFIED, 'AS FABRICATED' (2219-F) |
| SAE AMS 4270 : 2016 | ALUMINUM ALLOY, ALCLAD FLAT SHEET 4.1CU - 1.4MG - 0.45MN (ALCLAD 2424-T3) SOLUTION HEAT TREATED AND COLD WORKED |
| SAE AMS 4086 : 2015 | ALUMINUM ALLOY, DRAWN, ROUND, SEAMLESS HYDRAULIC TUBING, 4.4CU - 1.5MG - 0.6MN (2024-T3), SOLUTION HEAT TREATED, COLD WORKED AND NATURALLY AGED |
| SAE AMS 4085 : 2011 | ALUMINUM ALLOY SHEET, 5.7ZN - 2.2MG - 1.6CU - 0.22CR (7475-T761), SOLUTION HEAT TREATED AND OVERAGED |
| SAE AMS 4407 : 2018 | ALUMINUM ALLOY, PLATE (7056-T7651), 9.1ZN - 1.6CU - 1.9MG, SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4478 : 2018 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD, 4.4CU - 1.5MG - 0.60MN (ALCLAD 2024, -T81 SHEET, -T851 PLATE), SOLUTION HEAT TREATED, COLD WORKED AND ARTIFICIALLY AGED |
| SAE AMS 4153 : 2015 | ALUMINUM ALLOY, EXTRUSIONS 4.5CU - 0.85SI - 0.80MN - 0.50MG (2014-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4356 : 2016 | ALUMINUM ALLOY SEAMLESS DRAWN ROUND TUBING, 2.3 CU - 8.0 ZN - 2.0 MG - 0.16 ZR (7155-T76), SOLUTION HEAT TREATED AND AGED |
| SAE AMS 4408 : 2018 | ALUMINUM ALLOY, PLATE (7140-T7651), 6.6ZN - 1.8CU - 2.0MG - 0.10ZR, SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4326 : 2018 | ALUMINUM ALLOY, 2013, EXTRUDED BAR, ROD, AND PROFILES, 1.0MG - 0.80SI - 1.8CU - 0.20CR (2013- T6511), SOLUTION HEAT TREATED, STRESS-RELIEVED BY STRETCHING, AND AGED |
| SAE AMS 4305 : 2012 | ALUMINUM ALLOY, EXTRUDED PROFILES (7449-T79511) 8.1ZN - 1.8CU - 2.2MG - 0.16ZR SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED (COMPOSITION SIMILAR TO UNS A97449) |
| SAE AMS 4279 : 2011 | ALUMINUM ALLOY, ALCLAD SHEET, 4.4CU - 1.5MG - 0.60MN (2024 -T4 FLAT SHEET), SOLUTION HEAT TREATED, HIGH FORMABILITY |
| SAE AMS 4049 : 2016 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 5.6ZN - 2.5MG - 1.6CU - 0.23CR (ALCLAD 7075; -T6 SHEET - T651 PLATE) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4087 : 2015 | ALUMINUM ALLOY TUBING, SEAMLESS, DRAWN, (2024-0), REINSTATE COMPOSITION ANNEALED |
| SAE AMS 4107 : 2018 | ALUMINUM ALLOY DIE FORGINGS (7050-T74) SOLUTION HEAT TREATED AND OVERAGED |
| SAE AMS 4123 : 2011 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS AND RODS (7075-T651) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4156 : 2015 | ALUMINUM ALLOY, EXTRUSIONS 0.68MG - 0.40SI (6063-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4150 : 2013 | ALUMINUM ALLOY, EXTRUSIONS AND RINGS 1.0MG - 0.60SI - 0.28CU - 0.20CR - (6061-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4201 : 2014 | ALUMINUM ALLOY PLATE 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (7050-T7651) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4337 : 2017 | ALUMINUM ALLOY, EXTRUDED PROFILES (7055-T77511), 8.0ZN - 2.3CU - 2.0MG - 0.16ZR, SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4340 : 2011 | ALUMINUM ALLOY, EXTRUSIONS, 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (7050-T76511), SOLUTION HEAT TREATED, STRESS RELIEVED, STRAIGHTENED, AND OVERAGED |
| ASTM B 308M : 1988 | Specification for Aluminum-Alloy 6061-T6 Standard Structural Shapes, Rolled or Extruded (Metric) (Withdrawn 1990) |
| ASTM C 1729 : 2017 : REDLINE | Standard Specification for Aluminum Jacketing for Insulation |
| SAE AMS 4056 : 2016 | ALUMINUM ALLOY, SHEET AND PLATE, 4.4MG - 0.70MN - 0.15CR (5083-O), ANNEALED |
| SAE AMS 4402 : 2018 | ALUMINUM ALLOY, EXTRUDED PROFILES (2024-T432), 4.4CU - 1.5MG - 0.6MN, ANNEALED, STRETCH FORMED, SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| SAE AMS 4063F:2019 | Aluminum Alloy, Clad One Side, Sheet, 1.25Mn - 0.12Cu (No. 11-0 Brazing Sheet), Annealed |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.