ACI PRC-308 : 2016
Current
The latest, up-to-date edition.
GUIDE TO EXTERNAL CURING OF CONCRETE
Hardcopy , PDF
English
05-01-2016
CHAPTER 1 - INTRODUCTION
CHAPTER 2 - DEFINITIONS
CHAPTER 3 - CURING METHODS AND MATERIALS
CHAPTER 4 - CURING FOR DIFFERENT TYPES OF
CONSTRUCTION
CHAPTER 5 - MONITORING CURING AND CURING
EFFECTIVENESS
CHAPTER 6 - REFERENCES
Defines practices, procedures, materials, and monitoring methods for the external curing of concrete and provides guidance for specifying curing procedures.
Committee |
308
|
DevelopmentNote |
Supersedes ACI 308 (02/2004)
|
DocumentType |
Standard
|
ISBN |
9781942727873
|
Pages |
36
|
PublisherName |
American Concrete Institute
|
Status |
Current
|
Supersedes |
ACI 237R : 2007 | SELF-CONSOLIDATING CONCRETE |
ACI PRC-363.2 : 2011 | GUIDE TO QUALITY CONTROL AND ASSURANCE OF HIGH-STRENGTH CONCRETE |
ACI 225R : 2019 | GUIDE TO THE SELECTION AND USE OF HYDRAULIC CEMENTS |
ANSI/AWWA D110:2013(R2018) | WIRE- AND STRAND-WOUND, CIRCULAR, PRESTRESSED CONCRETE WATER TANKS |
ACI 234R : 2006 | GUIDE FOR THE USE OF SILICA FUME IN CONCRETE |
ASTM F 2551 : 2009 | Standard Practice for Installing a Protective Cementitious Liner System in Sanitary Sewer Manholes |
ACI PRC-308-213-13:2013(R2022) | Report on Internally Cured Concrete Using Prewetted Absorptive Lightweight Aggregate |
ACI 350.2R : 2004 | CONCRETE STRUCTURES FOR CONTAINMENT OF HAZARDOUS MATERIALS |
ACI 225R : 2016 | GUIDE TO THE SELECTION AND USE OF HYDRAULIC CEMENTS |
ACI 233R : 2017 | GUIDE TO THE USE OF SLAG CEMENT IN CONCRETE AND MORTAR |
ACI 544.3R : 2008 | GUIDE FOR SPECIFYING, PROPORTIONING, AND PRODUCTION OF FIBER-REINFORCED CONCRETE |
ACI 365.1R : 2017 | REPORT ON SERVICE LIFE PREDICTION |
ACI 345.1R : 2016 | GUIDE TO MAINTENANCE OF CONCRETE BRIDGE MEMBERS |
SSPC-GUIDE 20 : 2014 | GUIDE FOR APPLYING THICK FILM COATINGS AND SURFACINGS OVER CONCRETE FLOORS |
ACI 533R : 2011 | GUIDE FOR PRECAST CONCRETE WALL PANELS |
ACI 325.12R : 2002 | Guide for Design of Jointed Concrete Pavements for Streets and Local Roads<br> |
ACI 543R : 2012 | GUIDE TO DESIGN, MANUFACTURE, AND INSTALLATION OF CONCRETE PILES |
ACI 524R : 2016 | GUIDE TO PORTLAND CEMENT-BASED PLASTER |
ACI 224.1R : 2007 | CAUSES, EVALUATION, AND REPAIR OF CRACKS IN CONCRETE STRUCTURES |
ASTM F 2551 : 2009 : R2016 | Standard Practice for Installing a Protective Cementitious Liner System in Sanitary Sewer Manholes |
CSA S413 : 2014 | PARKING STRUCTURES |
ACI 330R : 2008 | GUIDE FOR THE DESIGN AND CONSTRUCTION OF CONCRETE PARKING LOTS |
ACI 332.1R : 2006 | GUIDE TO RESIDENTIAL CONCRETE CONSTRUCTION |
ACI 305R : 2010 | GUIDE TO HOT WEATHER CONCRETING |
ACI 362.1R : 2012 | GUIDE FOR THE DESIGN AND CONSTRUCTION OF DURABLE CONCRETE PARKING STRUCTURES |
ACI 228.1R : 2003 | IN-PLACE METHODS TO ESTIMATE CONCRETE STRENGTH |
ACI 345R : 2011 | GUIDE FOR CONCRETE HIGHWAY BRIDGE DECK CONSTRUCTION |
ACI 222.3R : 2011 | GUIDE TO DESIGN AND CONSTRUCTION PRACTICES TO MITIGATE CORROSION OF REINFORCEMENT IN CONCRETE STRUCTURES |
ACI ITG-4.2R : 2006 | MATERIALS AND QUALITY CONSIDERATIONS FOR HIGH-STRENGTH CONCRETE IN MODERATE TO HIGH SEISMIC APPLICATIONS |
ACI 325.13R : 2006 | CONCRETE OVERLAYS FOR PAVEMENT REHABILITATION |
ACI 363R : 2010 | REPORT ON HIGH-STRENGTH CONCRETE |
ACI 214.4R : 2010 | GUIDE FOR OBTAINING CORES AND INTERPRETING COMPRESSIVE STRENGTH RESULTS |
PIP STS03001 : 2017 | PLAIN AND REINFORCED CONCRETE SPECIFICATION |
CSA A23.1 A23.2 : 2014 | CONCRETE MATERIALS AND METHODS OF CONCRETE CONSTRUCTION/TEST METHODS AND STANDARD PRACTICES FOR CONCRETE |
ACI 301 : 2016 | SPECIFICATIONS FOR STRUCTURAL CONCRETE |
ACI 237R : 2007 | SELF-CONSOLIDATING CONCRETE |
ASTM C 403/C403M : 2016 : REDLINE | Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance |
ASTM C 900 : 2015 : REDLINE | Standard Test Method for Pullout Strength of Hardened Concrete |
ACI 228.2R : 2013 | REPORT ON NONDESTRUCTIVE TEST METHODS FOR EVALUATION OF CONCRETE IN STRUCTURES |
ASTM C 1157/C1157M : 2017 : REDLINE | Standard Performance Specification for Hydraulic Cement |
ASTM C 873/C873M : 2015 : REDLINE | Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds |
ASTM C 150/C150M : 2017-04 | SPECIFICATION FOR PORTLAND CEMENT |
ASTM C 1315 : 2011 : REDLINE | Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete |
ACI 305R : 2010 | GUIDE TO HOT WEATHER CONCRETING |
ACI 234R : 2006 | GUIDE FOR THE USE OF SILICA FUME IN CONCRETE |
ACI 318 : 2014 | BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE AND COMMENTARY |
ASTM C 171 : 2016 : REDLINE | Standard Specification for Sheet Materials for Curing Concrete |
ASTM C 1240 : 2015 : REDLINE | Standard Specification for Silica Fume Used in Cementitious Mixtures |
ACI 544.3R : 2008 | GUIDE FOR SPECIFYING, PROPORTIONING, AND PRODUCTION OF FIBER-REINFORCED CONCRETE |
ACI 302.1R : 2015 | GUIDE TO CONCRETE FLOOR AND SLAB CONSTRUCTION |
ACI 231R : 2010 | REPORT ON EARLY-AGE CRACKING: CAUSES, MEASUREMENT AND MITIGATION |
ASTM C 642 : 2013 : REDLINE | Standard Test Method for Density, Absorption, and Voids in Hardened Concrete |
ACI 207.2R : 2007 | REPORT ON THERMAL AND VOLUME CHANGE EFFECTS ON CRACKING OF MASS CONCRETE |
ACI 223R : 2010 | GUIDE FOR THE USE OF SHRINKAGE-COMPENSATING CONCRETE |
ACI 360R : 2010 | GUIDE TO DESIGN OF SLABS-ON-GROUND |
ACI 313 : 2016 | DESIGN SPECIFICATION FOR CONCRETE SILOS AND STACKING TUBES FOR STORING GRANULAR MATERIALS AND COMMENTARY |
ACI 523.1R : 2006 | GUIDE FOR CAST-IN-PLACE LOW DENSITY CELLULAR CONCRETE |
ACI 228.1R : 2003 | IN-PLACE METHODS TO ESTIMATE CONCRETE STRENGTH |
BS 1881-208:1996 | Testing concrete Recommendations for the determination of the initial surface absorption of concrete |
ACI 201.2R : 2008 | Guide to Durable Concrete |
ACI 207.1R : 2005 | GUIDE TO MASS CONCRETE |
ASTM C 779/C779M : 2012 : REDLINE | Standard Test Method for Abrasion Resistance of Horizontal Concrete Surfaces |
BS 1881-122:1983 | Testing concrete Method for determination of water absorption |
ASTM C 666/C666M : 2015 : REDLINE | Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing |
ACI 306R : 2016 | GUIDE TO COLD WEATHER CONCRETING |
ASTM C 309 : 2011 : REDLINE | Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete |
ACI 548.1R : 2009 | GUIDE FOR THE USE OF POLYMERS IN CONCRETE |
ACI 363R : 2010 | REPORT ON HIGH-STRENGTH CONCRETE |
BS 1881-5:1970 | Testing concrete Methods of testing hardened concrete for other than strength |
ASTM C 944/C944M : 2012 : REDLINE | Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method |
ACI 302.2R : 2006 | GUIDE FOR CONCRETE SLABS THAT RECEIVE MOISTURE-SENSITIVE FLOORING MATERIALS |
ACI 310R : 2013 | GUIDE TO DECORATIVE CONCRETE |
ASTM C 156 : 2017 : REDLINE | Standard Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete |
ACI 522R : 2010 | REPORT ON PERVIOUS CONCRETE |
ASTM C 418 : 2012 : REDLINE | Standard Test Method for Abrasion Resistance of Concrete by Sandblasting |
ASTM C 1138M : 2012 : REDLINE | Standard Test Method for Abrasion Resistance of Concrete (Underwater Method) |
ACI 306.1 : 1990 | STANDARD SPECIFICATION FOR COLD WEATHER CONCRETING |
ACI PRC-363.2 : 2011 | GUIDE TO QUALITY CONTROL AND ASSURANCE OF HIGH-STRENGTH CONCRETE |
ACI 308-213R : 2013 | REPORT ON INTERNALLY CURED CONCRETE USING PREWETTED ABSORPTIVE LIGHTWEIGHT AGGREGATE |
ACI 506.2 : 2013 | SPECIFICATION FOR SHOTCRETE |
ACI 308.1 : 2011 | SPECIFICATION FOR CURING CONCRETE |
ACI 207.5R : 2011 | REPORT ON ROLLER-COMPACTED MASS CONCRETE |
ACI 303R : 2012 | GUIDE TO CAST-IN-PLACE ARCHITECTURAL CONCRETE PRACTICE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.