ACI 345R : 2011
Current
Current
The latest, up-to-date edition.
GUIDE FOR CONCRETE HIGHWAY BRIDGE DECK CONSTRUCTION
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
09-01-2011
Publisher
US$83.50
Excluding Tax where applicable
Chapter 1 - Introduction and scope
Chapter 2 - Definitions
Chapter 3 - Design and durability considerations
Chapter 4 - Concrete materials
Chapter 5 - Reinforcement
Chapter 6 - Placing, finishing, and curing
Chapter 7 - Overlays
Chapter 8 - References
Presents recommendations for bridge deck construction based on considerations of durability, concrete materials, reinforcement, placing, finishing and curing, and overlays.
| Committee |
345
|
| DocumentType |
Standard
|
| ISBN |
9780870314100
|
| Pages |
46
|
| PublisherName |
American Concrete Institute
|
| Status |
Current
|
| Supersedes |
| ACI 222.3R : 2011 | GUIDE TO DESIGN AND CONSTRUCTION PRACTICES TO MITIGATE CORROSION OF REINFORCEMENT IN CONCRETE STRUCTURES |
| ACI 224.1R : 2007 | CAUSES, EVALUATION, AND REPAIR OF CRACKS IN CONCRETE STRUCTURES |
| ACI PRC-546:2023 | Concrete Repair—Guide |
| ASTM C 586 : 2011 : REDLINE | TEST METHOD FOR POTENTIAL ALKALI REACTIVITY OF CARBONATE ROCKS AS CONCRETE AGGREGATES (ROCK-CYLINDER METHOD) |
| ASTM C 457/C457M : 2016 : REDLINE | Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete |
| ASTM C 1260 : 2014 : REDLINE | Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method) |
| AASHTO T 84 : 2013 | METHOD OF TEST FOR SPECIFIC GRAVITY AND ABSORPTION OF FINE AGGREGATE |
| AASHTO MP 18M/MP 18 : 1900 | SPECIFICATION FOR UNCOATED, CORROSION-RESISTANT, DEFORMED AND PLAIN ALLOY, BILLET-STEEL BARS FOR CONCRETE REINFORCEMENT AND DOWELS |
| ACI 503R : 1993 | USE OF EPOXY COMPOUNDS WITH CONCRETE |
| AASHTO M 307 : 2013(R2017) | SPECIFICATION FOR SILICA FUME USED IN CEMENTITIOUS MIXTURES |
| ACI PRC-308 : 2016 | GUIDE TO EXTERNAL CURING OF CONCRETE |
| ASTM A 615/A615M : 2016-03 | SPECIFICATION FOR DEFORMED AND PLAIN CARBON-STEEL BARS FOR CONCRETE REINFORCEMENT |
| ASTM C 1603 : 2016 : REDLINE | Standard Test Method for Measurement of Solids in Water |
| AASHTO T 96 : 2002 | METHOD OF TEST FOR RESISTANCE TO DEGRADATION OF SMALL-SIZE COARSE AGGREGATE BY ABRASION AND IMPACT IN THE LOS ANGELES MACHINE |
| ASTM C 1157/C1157M : 2017 : REDLINE | Standard Performance Specification for Hydraulic Cement |
| ACI 440.1R : 2015 | GUIDE FOR THE DESIGN AND CONSTRUCTION OF STRUCTURAL CONCRETE REINFORCED WITH FIBER-REINFORCED POLYMER (FRP) BARS |
| AASHTO M 85 : 2015 | SPECIFICATION FOR PORTLAND CEMENT |
| ASTM C 150/C150M : 2017-04 | SPECIFICATION FOR PORTLAND CEMENT |
| ASTM C 87/C87M : 2017 : REDLINE | Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar |
| ASTM C 88 : 2013-08 | TEST METHOD FOR SOUNDNESS OF AGGREGATES BY USE OF SODIUM SULFATE OR MAGNESIUM SULFATE |
| ACI 212.4R : 2004 | GUIDE FOR THE USE OF HIGH-RANGE WATER-REDUCING ADMIXTURES (SUPERPLASTICIZERS) IN CONCRETE |
| ACI PRC-548.3 : 2009 | REPORT ON POLYMER-MODIFIED CONCRETE |
| ACI 305R : 2010 | GUIDE TO HOT WEATHER CONCRETING |
| AASHTO T 113 : 2015 | METHOD OF TEST FOR LIGHTWEIGHT PIECES IN AGGREGATE |
| ACI 234R : 2006 | GUIDE FOR THE USE OF SILICA FUME IN CONCRETE |
| AASHTO T 27 : 2014 | METHOD OF TEST FOR SIEVE ANALYSIS OF FINE AND COARSE AGGREGATES |
| ACI 548.8 : 2007 | SPECIFICATION FOR TYPE EM (EPOXY MULTI-LAYER) POLYMER OVERLAY FOR BRIDGE AND PARKING GARAGE DECKS |
| ACI 548.9 : 2008 | SPECIFICATION FOR TYPE ES (EPOXY SLURRY) POLYMER OVERLAYS FOR BRIDGE AND PARKING GARAGE DECKS |
| AASHTO T 161 : 2008 | METHOD OF TEST FOR RESISTANCE OF CONCRETE TO RAPID FREEZING AND THAWING |
| ASTM C 171 : 2016 : REDLINE | Standard Specification for Sheet Materials for Curing Concrete |
| AASHTO M 302 : 2015 | SPECIFICATION FOR SLAG CEMENT FOR USE IN CONCRETE AND MORTARS |
| AASHTO M 31M/M 31 : 2015 | STANDARD SPECIFICATION FOR DEFORMED AND PLAIN CARBON AND LOW-ALLOY STEEL BARS FOR CONCRETE REINFORCEMENT |
| ASTM A 706/A706M : 2016 : REDLINE | Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement |
| ACI 211.4R : 2008 | GUIDE FOR SELECTING PROPORTIONS FOR HIGH-STRENGTH CONCRETE USING PORTLAND CEMENT AND OTHER CEMENTITIOUS MATERIALS |
| ACI 221.1R : 1998 | REPORT ON ALKALI-AGGREGATE REACTIVITY |
| ASTM C 539 : 1984 | TEST METHOD FOR LINEAR THERMAL EXPANSION OF PORCELAIN ENAMEL AND GLAZE FRITS AND CERAMIC WHITEWARE MATERIALS BY INTERFEROMETRIC METHOD |
| ASTM C 1240 : 2015 : REDLINE | Standard Specification for Silica Fume Used in Cementitious Mixtures |
| AASHTO TF 34 : 1995 | TASK FORCE 34 - GUIDE SPECIFICATIONS FOR POLYMER CONCRETE BRIDGE DECK OVERLAYS |
| AASHTO T 19M/T 19 : 1900 | METHOD OF TEST FOR BULK DENSITY ('UNIT WEIGHT') AND VOIDS IN AGGREGATE |
| ACI 544.3R : 2008 | GUIDE FOR SPECIFYING, PROPORTIONING, AND PRODUCTION OF FIBER-REINFORCED CONCRETE |
| ACI 211.1 : 1991 | SELECTING PROPORTIONS FOR NORMAL, HEAVYWEIGHT AND MASS CONCRETE |
| ACI 548.4 : 2011 | SPECIFICATION FOR LATEX-MODIFIED CONCRETE (LCM) OVERLAYS |
| ACI 223R : 2010 | GUIDE FOR THE USE OF SHRINKAGE-COMPENSATING CONCRETE |
| ACI 232.2R : 2003 | REPORT ON THE USE OF FLY ASH IN CONCRETE |
| ASTM C 127 : 2015 : REDLINE | Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate (Withdrawn 2024) |
| ACI 504R : 90(R1997) | GUIDE TO SEALING JOINTS IN CONCRETE STRUCTURES |
| ASTM C 672/C672M : 2012 | Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals (Withdrawn 2021) |
| AASHTO M 284M/M 284 : 2009 | SPECIFICATION FOR EPOXY-COATED REINFORCING BARS: MATERIALS AND COATING REQUIREMENTS |
| ACI 440R : 2007 | REPORT ON FIBER-REINFORCED POLYMER (FRP) REINFORCEMENT FOR CONCRETE STRUCTURES |
| ACI 345.1R : 2016 | GUIDE TO MAINTENANCE OF CONCRETE BRIDGE MEMBERS |
| ASTM E 274/E274M : 2015 : REDLINE | Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire |
| ACI 201.2R : 2008 | Guide to Durable Concrete |
| ASTM C 666/C666M : 2015 : REDLINE | Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing |
| ASTM C 845 : 2004 | Standard Specification for Expansive Hydraulic Cement |
| ACI 306R : 2016 | GUIDE TO COLD WEATHER CONCRETING |
| ACI 304.5R : 91(R1997) | BATCHING, MIXING, AND JOB CONTROL OF LIGHTWEIGHT CONCRETE |
| ASTM C 309 : 2011 : REDLINE | Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete |
| ACI 548.1R : 2009 | GUIDE FOR THE USE OF POLYMERS IN CONCRETE |
| ACI 440.3R : 2012 | GUIDE TEST METHODS FOR FIBER-REINFORCED POLYMERS (FRPS) FOR REINFORCING OR STRENGTHENING CONCRETE STRUCTURES |
| AASHTO T 131 : 2015 | METHOD OF TEST FOR TIME OF SETTING OF HYDRAULIC CEMENT BY VICAT NEEDLE |
| ACI 365.1R : 2017 | REPORT ON SERVICE LIFE PREDICTION |
| ASTM C 128 : 2015 : REDLINE | Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate |
| AASHTO T 26 : 1979 | METHOD OF TEST FOR QUALITY OF WATER TO BE USED IN CONCRETE |
| AASHTO T 21M/T 21 : 2015 | METHOD OF TEST FOR ORGANIC IMPURITIES IN FINE AGGREGATES FOR CONCRETE |
| AASHTO GFRP 1 : 0 | LRFD BRIDGE DESIGN GUIDE SPECIFICATIONS FOR GFRP-REINFORCED CONCRETE BRIDGE DECKS AND TRAFFIC RAILINGS |
| ACI 233R : 2017 | GUIDE TO THE USE OF SLAG CEMENT IN CONCRETE AND MORTAR |
| ASTM C 136 : 2006 | Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
| ACI 363R : 2010 | REPORT ON HIGH-STRENGTH CONCRETE |
| AASHTO T 85 : 2014 | STANDARD METHOD OF TEST FOR SPECIFIC GRAVITY AND ABSORPTION OF COARSE AGGREGATE |
| ACI 211.2 : 1998 | SELECTING PROPORTIONS FOR STRUCTURAL LIGHTWEIGHT CONCRETE |
| ASTM C 123 : 2004 | Standard Test Method for Lightweight Particles in Aggregate |
| ACI 212.3R : 2016 | REPORT ON CHEMICAL ADMIXTURES FOR CONCRETE |
| ACI 440.5 : 2008 | SPECIFICATION FOR CONSTRUCTION WITH FIBER-REINFORCED POLYMER REINFORCING BARS |
| ACI 221R : 1996 | GUIDE FOR USE OF NORMAL WEIGHT AND HEAVYWEIGHT AGGREGATES IN CONCRETE |
| AASHTO T 106M/T 106 : 1900 | METHOD OF TEST FOR COMPRESSIVE STRENGTH OF HYDRAULIC CEMENT MORTAR (USING 50-MM OR 2-IN. CUBE SPECIMENS) |
| ACI 214R : 2011 | GUIDE TO EVALUATION OF STRENGTH TEST RESULTS OF CONCRETE |
| ASTM C 117 : 2017 : REDLINE | Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing |
| AASHTO T 104 : 1999 | METHOD OF TEST FOR SOUNDNESS OF AGGREGATE BY USE OF SODIUM SULFATE OR MAGNESIUM SULFATE |
| ACI PRC-201.1 : 2008 | GUIDE FOR CONDUCTING A VISUAL INSPECTION OF CONCRETE IN SERVICE |
| ACI 440.6 : 2008 | SPECIFICATION FOR CARBON AND GLASS FIBER-REINFORCED POLYMER BAR MATERIALS FOR CONCRETE REINFORCEMENT |
| ACI 309R : 2005 | GUIDE FOR CONSOLIDATION OF CONCRETE |
| ASTM C 40 : 2004 | Standard Test Method for Organic Impurities in Fine Aggregates for Concrete |
| AASHTO M 240 : 2015 | SPECIFICATION FOR BLENDED HYDRAULIC CEMENT |
| ASTM C 494/C494M : 2017 : REDLINE | Standard Specification for Chemical Admixtures for Concrete |
| ACI 548.5R : 2016 | GUIDE FOR POLYMER CONCRETE OVERLAYS |
| ACI 325.6R : 88(R1997) | TEXTURING CONCRETE PAVEMENTS |
| ASTM C 1137 : 2005 | Standard Test Method for Degradation of Fine Aggregate Due to Attrition (Withdrawn 2011) |
| ACI 304R : 2000 | GUIDE FOR MEASURING, MIXING, TRANSPORTING AND PLACING CONCRETE |
| ACI 308.1 : 2011 | SPECIFICATION FOR CURING CONCRETE |
| AASHTO T 303 : 2000 | METHOD OF TEST FOR ACCELERATED DETECTION OF POTENTIALLY DELETERIOUS EXPANSION OF MORTAR BARS DUE TO ALKALI-SILICA REACTION |
| ACI 304.2R : 2017 | GUIDE TO PLACING CONCRETE BY PUMPING METHODS |
| ACI 232.1R : 2012 | REPORT ON THE USE OF RAW OR PROCESSED NATURAL POZZOLANS IN CONCRETE |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.