ABS 0063 : 2018 COR 2018
Current
Current
The latest, up-to-date edition.
RULES FOR BUILDING AND CLASSING FACILITIES ON OFFSHORE INSTALLATIONS
Published date
01-12-2013
Publisher
Sorry this product is not available in your region.
CHAPTER 1 - Scope and Conditions of Classification
(Supplement to the ABS Rules for Conditions
of Classification - Offshore Units and Structures)
CHAPTER 2 - Definitions, References, Acronyms and
Abbreviations
CHAPTER 3 - Floating Installations
CHAPTER 4 - Fixed Installations
CHAPTER 5 - Surveys
APPENDIX 1 - Plastic Pipe Installations
APPENDIX 2 - Fire Tests for Non-metallic Hoses
APPENDIX 3 - Fiber Reinforced Plastic (FRP) Gratings
APPENDIX 4 - References, Codes and Standards
APPENDIX 5 - Systems Requirements for Floating
Installations
Describes the technical requirements and criteria employed by ABS in the review and survey of hydrocarbon production facilities that are being considered for Classification and for maintenance of Classification.
| DocumentType |
Standard
|
| PublisherName |
American Bureau of Shipping
|
| Status |
Current
|
| API 607 : 2016 | FIRE TEST FOR QUARTER-TURN VALVES AND VALVES EQUIPPED WITH NONMETALLIC SEATS |
| API 500 : 2012 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
| API 2A WSD : 2014 | PLANNING, DESIGNING, AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - WORKING STRESS DESIGN |
| ISO 19922:2005 | Ships and marine technology Fire resistance of metallic pipe components with resilient and elastomeric seals Requirements imposed on the test bench |
| API 14FZ : 2013 | RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS |
| API 661 : 2015 | PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - AIR-COOLED HEAT EXCHANGERS |
| API 616 : 2011 | GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| NFPA 96 : 2017 | VENTILATION CONTROL AND FIRE PROTECTION OF COMMERCIAL COOKING OPERATIONS |
| ABS 0168 : 2010 COR 2013 | GUIDE FOR WELL TEST SYSTEMS |
| NFPA 780 : 2017 | INSTALLATION OF LIGHTNING PROTECTION SYSTEMS |
| API RP 14C : 2017 | ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR OFFSHORE PRODUCTION FACILITIES |
| API 520-1 : 2014 | SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 1: SIZING AND SELECTION |
| ISO 75:1987 | Plastics and ebonite Determination of temperature of deflection under load |
| API 2000 : 2014 | VENTING ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| API 6A : 2010 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| ANSI/ASCE 7 88 : 1990 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
| ISA 92.0.01-1 : 1998 | PERFORMANCE REQUIREMENTS FOR TOXIC GAS-DETECTION INSTRUMENTS: HYDROGEN SULFIDE |
| API 620 : 2013 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
| NFPA 17 : 2017 | DRY CHEMICAL EXTINGUISHING SYSTEMS |
| IMO IF110 : 2014 SUPP 2016 | SOLAS CONSOLIDATED EDITION |
| NFPA 496 : 2017 | PURGED AND PRESSURIZED ENCLOSURES FOR ELECTRICAL EQUIPMENT |
| ISO 10418:2003 | Petroleum and natural gas industries Offshore production installations Analysis, design, installation and testing of basic surface process safety systems |
| ISO 15541:2016 | Ships and marine technology — Fire resistance of non-metallic hose assemblies and non-metallic compensators — Requirements for the test bench |
| BS 7159:1989 | Code of practice for design and construction of glass-reinforced plastics (GRP) piping systems for individual plants or sites |
| ISO 11357-2:2013 | Plastics Differential scanning calorimetry (DSC) Part 2: Determination of glass transition temperature and glass transition step height |
| API SPEC 12L : 2008 | SPECIFICATION FOR VERTICAL AND HORIZONTAL EMULSION TREATERS |
| NFPA 15 : 2017 | WATER SPRAY FIXED SYSTEMS FOR FIRE PROTECTION |
| ASTM D 2925 : 2014 : REDLINE | Standard Test Method for Beam Deflection of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow |
| ISO 15540:2016 | Ships and marine technology — Fire resistance of non-metallic hose assemblies and non-metallic compensators — Test methods |
| NFPA 10 : 2018 | PORTABLE FIRE EXTINGUISHERS |
| API 521 : 2014 | PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS |
| IMO IA811 : 2001 | MOBILE OFFSHORE DRILLING UNITS (MODU) CODE, CONSOLIDATED |
| API SPEC 16C : 2015 | CHOKE AND KILL EQUIPMENT |
| IEEE 242-2001 | IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (IEEE Buff Book) |
| ABS 0117 : 2003 | GUIDE FOR RISK EVALUATIONS FOR THE CLASSIFICATION OF MARINE-RELATED FACILITIES |
| API 617 : 2014 | AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS |
| API 660 : 2015 | SHELL-AND-TUBE HEAT EXCHANGERS |
| API SPEC 12K : 2008 | SPECIFICATION FOR INDIRECT TYPE OILFIELD HEATERS |
| ASTM D 2444 : 1999 | Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight) |
| API 505 : 1997 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2 |
| NFPA 11 : 2016 | LOW-, MEDIUM-, AND HIGH-EXPANSION FOAM |
| ASTM D 790 : 2017 : REDLINE | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
| NFPA 12 : 2015 | CARBON DIOXIDE EXTINGUISHING SYSTEMS |
| NFPA 72 : 2016 | NATIONAL FIRE ALARM AND SIGNALING CODE |
| ISO 9001:2015 | Quality management systems — Requirements |
| NFPA 13 : 2016 | INSTALLATION OF SPRINKLER SYSTEMS |
| API 610 : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| IMO IC844 : 2012 COR 2017 | 2010 FIRE TEST PROCEDURES (FTP) CODE |
| NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
| ASTM D 257 : 2014 : REDLINE | Standard Test Methods for DC Resistance or Conductance of Insulating Materials |
| ISO 10497:2010 | Testing of valves — Fire type-testing requirements |
| NFPA 77 : 2014 | STATIC ELECTRICITY |
| API 2C : 2012 | OFFSHORE PEDESTAL-MOUNTED CRANES |
| API 14G : 2007 | RECOMMENDED PRACTICE FOR FIRE PREVENTION AND CONTROL ON FIXED OPEN-TYPE OFFSHORE PRODUCTION PLATFORMS |
| NFPA 37 : 2018 | INSTALLATION AND USE OF STATIONARY COMBUSTION ENGINES AND GAS TURBINES |
| IEC 60947-2:2016 | Low-voltage switchgear and controlgear - Part 2: Circuit-breakers |
| ISO 75-3:2004 | Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics |
| IEC 60331:1970 | Fire-resisting characteristics of electric cables |
| ISO 4901:2011 | Reinforced plastics based on unsaturated-polyester resins Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography |
| IMO IB844 : 1998 SUPP 2006 | INTERNATIONAL CODE FOR APPLICATION OF FIRE TEST PROCEDURES (FTP CODE) |
| ASTM D 2992 : 2012 | Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings |
| API RP 2030 : 2014 | APPLICATION OF FIXED WATER SPRAY SYSTEMS FOR FIRE PROTECTION IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
| API 520-2 : 2015 | SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 2: INSTALLATION |
| ISO 19921:2005 | Ships and marine technology Fire resistance of metallic pipe components with resilient and elastomeric seals Test methods |
| IEC 60332-3-10:2000+AMD1:2008 CSV | Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus |
| API 2D : 2014 | OPERATION AND MAINTENANCE OF OFFSHORE CRANES |
| API 17D : 2011 | DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT |
| NFPA 20 : 2016 | INSTALLATION OF STATIONARY PUMPS FOR FIRE PROTECTION |
| API 619 : 2010 | ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.