ISO 9001:2015
Current
Current
The latest, up-to-date edition.
Quality management systems — Requirements
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French, Russian, Spanish, Castilian
Published date
09-22-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 9001:2015 specifies requirements for a quality management system when an organization:
a) needs to demonstrate its ability to consistently provide products and services that meet customer and applicable statutory and regulatory requirements, and
b) aims to enhance customer satisfaction through the effective application of the system, including processes for improvement of the system and the assurance of conformity to customer and applicable statutory and regulatory requirements.
All the requirements of ISO 9001:2015 are generic and are intended to be applicable to any organization, regardless of its type or size, or the products and services it provides.
| Committee |
ISO/TC 176/SC 2
|
| DevelopmentNote |
Supersedes ISO 9002 and ISO 9003 (04/2004) Supersedes ISO/FDIS 9001. (09/2015)
|
| DocumentType |
Standard
|
| Pages |
29
|
| ProductNote |
This standard also consider corrected version for FR for the year 2015-09
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| EN 14423:2013+A1:2016 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| I.S. EN 50126-2:2017 | RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 2: SYSTEMS APPROACH TO SAFETY |
| BS EN 61400-3:2009 | Wind turbines Design requirements for offshore wind turbines |
| 13/30280703 DC : 0 | BS EN 1329-1 - PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| 15/30293072 DC : 0 | BS EN ISO 6789-1 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - PART 1: REQUIREMENTS AND METHOD FOR DESIGN CONFORMANCE TESTING, QUALITY CONFORMANCE TESTING AND CALIBRATION PROCEDURE |
| I.S. EN ISO 19011:2011 | GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS (ISO 19011:2011) |
| DIN EN 15313:2016-09 | RAILWAY APPLICATIONS - IN-SERVICE WHEELSET OPERATION REQUIREMENTS - IN-SERVICE AND OFF-VEHICLE WHEELSET MAINTENANCE |
| BS EN 61513:2013 | Nuclear power plants. Instrumentation and control important to safety. General requirements for systems |
| S.R. CEN/TS 12666-2:2012 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| ISO 4642-1:2015 | Rubber and plastics hoses, non-collapsible, for fire-fighting service Part 1: Semi-rigid hoses for fixed systems |
| PREN 13658-2 : DRAFT 2017 | METAL LATH AND BEADS - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: EXTERNAL RENDERING |
| 15/30321131 DC : 0 | BS EN ISO 13485 - MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR REGULATORY PURPOSES |
| 14/30312130 DC : 0 | BS EN 13479 - WELDING CONSUMABLES - GENERAL PRODUCT STANDARD FOR FILLER METALS AND FLUXES FOR FUSION WELDING OF METALLIC MATERIALS |
| I.S. EN ISO/IEC 80079-34:2011 | EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE |
| PREN 13361 : DRAFT 2016 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
| 07/30174185 DC : 0 | BS EN ISO 1461 - HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS |
| API Q2 PORTUGUESE : 2011 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR SERVICE SUPPLY ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| 07/30169818 DC : 0 | BS EN 1013 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| NFPA 1999 : 2018 | PROTECTIVE CLOTHING AND ENSEMBLES FOR EMERGENCY MEDICAL OPERATIONS |
| NFPA 1855 : 2018 | SELECTION, CARE, AND MAINTENANCE OF PROTECTIVE ENSEMBLES FOR TECHNICAL RESCUE INCIDENTS |
| CSA Z15882 : 2009 : R2014 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS |
| I.S. EN 50129:2003 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SAFETY RELATED ELECTRONIC SYSTEMS FOR SIGNALLING |
| DIN EN ISO 13127:2013-03 | Packaging - Child resistant packaging - Mechanical test methods for reclosable child resistant packaging systems (ISO 13127:2012 + Cor. 1:2012) (includes Corrigendum :2012) |
| 14/30301257 DC : 0 | BS EN 13160-3 - LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS |
| 07/30166070 DC : 0 | BS EN 13230-4 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 4: PRESTRESSED BEARERS FOR SWITCHES AND CROSSINGS |
| PD CEN/TR 14585-2:2006 | Corrugated metal hose assemblies for pressure applications Guidance on the use of conformity assessment procedures |
| 12/30270456 DC | BS ISO 18091. Quality management systems. Guidelines for the application of ISO 9001:2008 in local government |
| S.R. CEN/TR 15419:2017 | PROTECTIVE CLOTHING - GUIDELINES FOR SELECTION, USE, CARE AND MAINTENANCE OF CHEMICAL PROTECTIVE CLOTHING |
| 03/306636 DC : DRAFT APR 2003 | EN 13674-3 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 3: CHECK RAILS |
| 99/709740 DC : DRAFT JUN 99 | PREN 10253-2 - BUTT WELDING PIPE FITTINGS - PART 2: WROUGHT CARBON AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| UNE-EN 15317:2014 | Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment |
| PD CEN/TS 13476-4:2013 | Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Guidance for the assessment of conformity |
| 12/30265310 DC : 0 | BS EN 124-5 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 5: GULLY TOPS AND MANHOLE TOPS MADE FROM COMPOSITE MATERIALS |
| UNE-ISO 37001:2017 | Anti-bribery management systems. Requirements with guidance for use. |
| UNE-EN 14811:2007 | Railway applications - Track - Special purpose rail - Grooved and associated construction |
| UNE-EN 10088-5:2010 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
| UNE-EN 10343:2010 | Steels for quenching and tempering for construction purposes - Technical delivery conditions |
| ISO 8255-2:2013 | Microscopes — Cover glasses — Part 2: Quality of materials, standards of finish and mode of packaging |
| 10/30197201 DC : 0 | BS EN ISO 14006 - ENVIRONMENTAL MANAGEMENT SYSTEMS - GUIDELINES FOR INCORPORATING ECODESIGN |
| 12/30265292 DC : 0 | BS EN 12050-2 - WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PRINCIPLES OF CONSTRUCTION AND TESTING - PART 2: LIFTING PLANTS FOR FAECAL-FREE WASTEWATER |
| BS EN 15224:2016 | Quality management systems. EN ISO 9001:2015 for healthcare |
| DIN EN ISO 11135-1:2007-08 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ISO 4642-2:2015 | Rubber and plastics hoses, non-collapsible, for fire-fighting service Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles |
| IEC TS 61850-2:2003 | Communication networks and systems in substations - Part 2: Glossary |
| 12/30259268 DC : 0 | BS ISO 14186 - AIR CARGO - FIRE CONTAINMENT COVERS - DESIGN, PERFORMANCE AND TESTING REQUIREMENTS |
| AWS G1.6 : 2006 | SPECIFICATION FOR THE QUALIFICATION OF PLASTICS WELDING INSPECTORS FOR HOT GAS, HOT GAS EXTRUSION, AND HEATED TOOL BUTT THERMOPLASTIC WELDS |
| ISO 20700:2017 | Guidelines for management consultancy services |
| AQAP 169 : 1 | NATO GUIDANCE ON THE USE OF AQAP 160 EDITION 1 |
| DIN ISO/IEC 15504-3:2011-07 | INFORMATION TECHNOLOGY - PROCESS ASSESSMENT - PART 3: GUIDANCE ON PERFORMING AN ASSESSMENT |
| ISO 11040-5:2012 | Prefilled syringes — Part 5: Plunger stoppers for injectables |
| 05/30128217 DC : DRAFT JAN 2005 | ISO/DIS 23933 - AEROSPACE - ARAMID REINFORCED LIGHTWEIGHT POLYTETRAFLUOROETHYLENE (PTFE) HOSE ASSEMBLIES, CLASSIFICATION 135 DEGREE C/20 684 KPA (275 DEGREE F/3 000 PSI) AND 135 DEGREE C/21 000 KPA (275 DEGREE F/3 046 PSI) - PROCUREMENT SPECIFICATION |
| DEFSTAN 05-95/2(1992) : 1992 | QUALITY SYSTEM REQUIREMENTS FOR THE DEVELOPMENT, SUPPLY AND MAINTENANCE OF SOFTWARE |
| ISO 4118:2016 | Air cargo Non-certified lower deck containers Design and testing |
| BS ISO 16063-22 : 2005 | METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 22: SHOCK CALIBRATION BY COMPARISON TO A REFERENCE TRANSDUCER |
| DIN EN 15682-2:2013-10 | GLASS IN BUILDING - HEAT SOAKED THERMALLY TOUGHENED ALKALINE EARTH SILICATE SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD |
| 17/30279844 DC : 0 | BS EN 17069-1 - RAILWAY APPLICATIONS - SYSTEMS AND PROCEDURES FOR CHANGE OF TRACK GAUGE - PART 1: AUTOMATIC VARIABLE GAUGE SYSTEMS |
| 15/30322573 DC : 0 | BS ISO/IEC 33071 - INFORMATION TECHNOLOGY - PROCESS ASSESSMENT - AN INTEGRATED PROCESS CAPABILITY ASSESSMENT MODEL FOR ENTERPRISE PROCESSES |
| 16/30329419 DC : 0 | BS EN 12566-1 - SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 1: PREFABRICATED SEPTIC TANKS |
| PD CEN/TR 1317-6:2012 | Road restraint systems Pedestrian restraint system. Pedestrian parapets |
| 16/30325907 DC : 0 | BS EN 15102 - DECORATIVE WALLCOVERINGS - ROLL FORM |
| I.S. EN 492:2012 | Fibre-cement slates and fittings - Product specification and test methods |
| 09/30176792 DC : 0 | BS EN 61513 - NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - GENERAL REQUIREMENTS FOR SYSTEMS |
| 11/30247943 DC : 0 | EN ISO/IEC 17065 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR CERTIFICATION BODIES CERTIFYING PRODUCTS, PROCESSES AND SERVICES |
| UNE-EN 54-22:2016 | Fire detection and fire alarm system - Part 22 : Resettable line-type heat detectors |
| BS ISO/IEC 19770-1:2017 | Information technology. IT asset management IT asset management systems. Requirements |
| UNE-ISO 13053-1:2012 | Quantitative methods in process improvement -- Six Sigma -- Part 1: DMAIC methodology |
| UNE-ISO/IEC TS 17021-3:2014 | Conformity assessment -- Requirements for bodies providing audit and certification of management systems -- Part 3: Competence requirements for auditing and certification of quality management systems |
| DIN EN 15285:2008-09 | Agglomerated stone - Modular tiles for flooring and stairs (internal and external) |
| 03/108542 DC : DRAFT MAY 2003 | BS EN ISO 11140-1 - STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
| 04/30118849 DC : DRAFT SEP 2004 | EN 15013 - PLASTICS PIPING SYSTEMS - NON-PRESSURE DRAINAGE AND SEWERAGE SYSTEMS BURIED IN GROUND |
| BS ISO/IEC 15288:2002 | Systems engineering. System life cycle processes |
| BS EN ISO 9004:2018 | Quality management. Quality of an organization. Guidance to achieve sustained success |
| ISO/IEC 10967-2:2001 | Information technology — Language independent arithmetic — Part 2: Elementary numerical functions |
| I.S. EN 61162-402:2005 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - DIGITAL INTERFACES - PART 402: MULTIPLE TALKERS AND MULTIPLE LISTENERS - SHIP SYSTEMS INTERCONNECTION - DOCUMENTATION AND TEST REQUIREMENTS |
| 11/30216823 DC : 0 | BS ISO 17367 - SUPPLY CHAIN APPLICATIONS OF RFID - PRODUCT TAGGING |
| DIN V ENV 61400-1 : 1996 | WIND TURBINE GENERATOR SYSTEMS - PART 1: SAFETY REQUIREMENTS |
| PD CEN/TS 16850:2015 | Societal and Citizen Security. Guidance for managing security in healthcare facilities |
| 17/30325421 DC : 0 | BS ISO 25119-1 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN AND DEVELOPMENT |
| DIN EN ISO/IEC 19796-1:2009-08 | INFORMATION TECHNOLOGY - LEARNING, EDUCATION AND TRAINING - QUALITY MANAGEMENT, ASSURANCE AND METRICS - PART 1: GENERAL APPROACH |
| UNI EN 1591-4 : 2013 | FLANGES AND THEIR JOINTS - PART 4: QUALIFICATION OF PERSONNEL COMPETENCY IN THE ASSEMBLY OF THE BOLTED CONNECTIONS OF CRITICAL SERVICE PRESSURIZED SYSTEMS |
| 14/30298043 DC : 0 | BS EN 61069-8 ED 2.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 8: ASSESSMENT OF OTHER SYSTEM PROPERTIES |
| PD CEN/TR 15983:2010 | Stationary source emissions. Guidance on the application of EN 14181:2004 |
| 17/30363625 DC : DRAFT SEP 2017 | BS EN ISO 11138-7 - STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 7: GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| API 591 RUSSIAN : 2008 | PROCESS VALVE QUALIFICATION PROCEDURE |
| BS EN 14509:2013 | Self-supporting double skin metal faced insulating panels. Factory made products. Specifications |
| PD ISO/TR 27809:2007 | Health informatics. Measures for ensuring patient safety of health software |
| BS IEC 61189-5-4 : 2015 | TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-4: GENERAL TEST METHODS FOR MATERIALS AND ASSEMBLIES - SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID WIRE FOR PRINTED BOARD ASSEMBLIES |
| ISO 18601:2013 | Packaging and the environment — General requirements for the use of ISO standards in the field of packaging and the environment |
| 16/30353588 DC : 0 | BS EN 61020-1 ED 3.0 - ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| PREN 13491 : DRAFT 2016 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES |
| DIN EN 124-3:2015-09 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 3: GULLY TOPS AND MANHOLE TOPS MADE OF STEEL OR ALUMINIUM ALLOYS |
| BS EN 60903:2003 | Live working. Gloves of insulating material |
| 14/30256684 DC : 0 | BS EN ISO 17668 - ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SHERARDIZING - SPECIFICATION |
| I.S. EN 16351:2015 | TIMBER STRUCTURES - CROSS LAMINATED TIMBER - REQUIREMENTS |
| 02/124462 DC : DRAFT DEC 2002 | BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| BS EN 61869-1:2009 | Instrument transformers General requirements |
| ISO 18604:2013 | Packaging and the environment — Material recycling |
| 16/30258478 DC : 0 | BS EN 13674-2 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| BS EN 14695:2010 | Flexible sheets for waterproofing. Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete. Definitions and characteristics |
| DIN EN 1254-8:2012-12 | Copper and copper alloys - Plumbing fittings - Part 8: Fittings with press ends for use with plastics and multilayer pipes |
| 14/30311460 DC : 0 | BS EN 14296 - SANITARY APPLIANCES - COMMUNAL WASHING TROUGHS |
| 11/30250205 DC : 0 | BS EN 6138 - AEROSPACE SERIES - CAP, PROTECTIVE, NON METALLIC FOR FITTING ENDS <= 3000 PSI HYDRAULIC SYSTEMS |
| CSA N285.0 : 2006 | GENERAL REQUIREMENTS FOR PRESSURE-RETAINING SYSTEMS AND COMPONENTS IN CANDU NUCLEAR POWER PLANTS |
| UNI CEI CEN/TR 16469 : 2014 | HYDROMETRY - MEASUREMENT OF THE RAINFALL INTENSITY (LIQUID PRECIPITATION): REQUIREMENTS, CALIBRATION METHODS AND FIELD MEASUREMENTS |
| 03/306438 DC : DRAFT APR 2003 | IEC 61133 ED. 2 - RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE |
| DIN EN 12764:2015-09 | SANITARY APPLIANCES - SPECIFICATION FOR WHIRLPOOL BATHS |
| UNI CEN/TS 13476-4 : 2013 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYLS CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 4: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| 11/30233259 DC : 0 | BS EN 1790 - ROAD MARKING MATERIALS - PREFORMED ROAD MARKINGS |
| BS ISO/IEC/IEEE 15288:2015 | Systems and software engineering. System life cycle processes |
| 12/30266874 DC | BS EN 1871. Road marking materials. Paint, thermoplastic and cold plastic materials. Specifications |
| I.S. EN 12271:2006 | SURFACE DRESSING - REQUIREMENTS |
| I.S. EN 12079-1:2006 | OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 1: OFFSHORE CONTAINERS - DESIGN, MANUFACTURE AND MARKING |
| 04/30089749 DC : DRAFT DEC 2004 | BS EN 62304 - MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE-CYCLE PROCESSES |
| 17/30346842 DC : 0 | BS ISO 10006 - QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY MANAGEMENT IN PROJECTS |
| BS EN 54-28:2016 | Fire detection and fire alarm system Non-resettable line-type heat detectors |
| 16/30338114 DC : 0 | BS EN 13361 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
| 14/30266573 DC : 0 | BS EN 12368 - TRAFFIC CONTROL EQUIPMENT - SIGNAL HEADS |
| SAE AMS 3721 : 2017 | TAPE FOR ORGANIC COATINGS ADHESION TESTING |
| I.S. EN 74-1:2005 | COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 1: COUPLERS FOR TUBES - REQUIREMENTS AND TEST PROCEDURES |
| 17/30339707 DC : 0 | BS ISO 21138-2 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: PIPES AND FITTINGS WITH SMOOTH EXTERNAL SURFACE, TYPE A |
| BS ISO 6517:2013 | Air cargo. Certified lower deck containers. Design and testing |
| BS EN 15927:2010 | Services offered by hearing aid professionals |
| 15/30328952 DC : 0 | BS EN ISO 10418 - PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - PROCESS SAFETY SYSTEMS |
| DIN ISO/IEC 15504-4:2011-08 | INFORMATION TECHNOLOGY - PROCESS ASSESSMENT - PART 4: GUIDANCE ON USE FOR PROCESS IMPROVEMENT AND PROCESS CAPABILITY DETERMINATION |
| BS IEC 61334-1.2 : 1997 | DISTRIBUTION AUTOMATION USING DISTRIBUTION LINE CARRIER SYSTEMS - GENERAL CONSIDERATIONS - GUIDE FOR SPECIFICATION |
| 15/30328787 DC : 0 | BS EN 13265 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN LIQUID WASTE CONTAINMENT PROJECTS |
| 16/30323827 DC : 0 | BS ISO 50007 - ACTIVITIES RELATING TO ENERGY SERVICES - GUIDELINES FOR THE ASSESSMENT AND IMPROVEMENT OF THE SERVICE TO USERS |
| BS EN 62138:2009 | Nuclear power plants. Instrumentation and control important for safety. Software aspects for computer-based systems performing category B or C functions |
| I.S. EN ISO 13174:2012 | CATHODIC PROTECTION OF HARBOUR INSTALLATIONS (ISO 13174:2012) |
| BS EN ISO 3691-6:2015 | Industrial trucks. Safety requirements and verification Burden and personnel carriers |
| DIN EN 16855-1 E : 2017 | WALK-IN COLD ROOMS - DEFINITION, THERMAL INSULATION PERFORMANCE AND TEST METHODS - PART 1: PREFABRICATED COLD ROOM KITS |
| BS ISO 10327:2014 | Air cargo. Main deck containers. Design and testing |
| DIN ISO 29990:2010-12 | Learning services for non-formal education and training - Basic requirements for service providers (ISO 29990:2010) |
| BS EN 45510-6-5:2000 | Guide for the procurement of power station equipment. Turbine auxiliaries Dry cooling systems - Section 5: Dry cooling systems |
| 09/30200834 DC : 0 | BS EN 1559-1 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| 10/30233182 DC : 0 | BS EN 492 - FIBRE-CEMENT SLATES AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS |
| DD ENV 1852-2:2001 | Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP) Guidance for the assessment of conformity |
| 14/30255135 DC : 0 | BS EN ISO 11607-1:2009/A1 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
| BS EN 14846:2008 | Building hardware. Locks and latches. Electromechanically operated locks and striking plates. Requirements and test methods |
| 02/103123 DC : DRAFT APR 2002 | BS EN 14449 - GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - EVALUATION OF CONFORMITY |
| DD ENV 50231:1997 | Aeronautical ground lighting electrical installation. Constant current regulator. Equipment specifications and tests |
| PD CEN/TR 16478:2012 | Surveillance from first commissioning on measuring devices used in natural gas supply to the installations of the activities under the Directive 2003/87/EC establishing a scheme of CO<sub>2</sub> emissions trading |
| PD ISO/TS 22163:2017 | Railway applications. Quality management system. Business management system requirements for rail organizations: ISO 9001:2015 and particular requirements for application in the rail sector |
| 12/30274796 DC : 0 | BS IEC 61189-5-2 ED.1 - TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-2: TEST METHODS FOR PRINTED BOARD ASSEMBLIES: SOLDERING FLUX |
| 01/704435 DC : DRAFT FEB 2001 | ISO/DIS 16426 FASTENERS - QUALITY ASSURANCE SYSTEM |
| ISO 35103:2017 | Petroleum and natural gas industries — Arctic operations — Environmental monitoring |
| I.S. EN 13292:1999 | SPACE AND ENGINEERING STANDARDS - POLICY AND PRINCIPLES |
| 08/30149503 DC : DRAFT JAN 2008 | BS EN ISO 14161 - STERILIZATION OF HEALTH CAR PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| ISO 12944-1:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction |
| 14/30304346 DC : 0 | BS EN ISO 17782 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - QUALIFICATION OF MANUFACTURERS OF SPECIAL MATERIALS |
| ASTM F 1295 : 2016 : REDLINE | Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700) |
| S.R. CEN TR 14383-2:2007 | PREVENTION OF CRIME - URBAN PLANNING AND BUILDING DESIGN - PART 2: URBAN PLANNING |
| 14/30286326 DC : 0 | BS ISO 18611-3 - SHIPS AND MARINE TECHNOLOGY - MARINE NOX REDUCTION AGENT AUS 40 - PART 3: HANDLING, TRANSPORTATION AND STORAGE |
| I.S. EN 124-6:2015 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) |
| BS EN 12004-1:2017 | Adhesives for ceramic tiles Requirements, assessment and verification of constancy of performance, classification and marking |
| 18/30373170 DC : 0 | BS EN 62668-2 - PROCESS MANAGEMENT FOR AVIONICS - COUNTERFEIT PREVENTION - PART 2: MANAGING ELECTRONIC COMPONENTS FROM NON-FRANCHISED SOURCES |
| ISO 16049-1:2013 | Air cargo equipment Restraint straps Part 1: Design criteria and testing methods |
| 16/30336859 DC : 0 | BS EN 1852-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| BS EN 60601-1-4:1997 | Medical electrical equipment. General requirements for safety Collateral standard. General requirements for programmable electrical medical systems |
| 15/30290851 DC : 0 | BS EN 54-25 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS |
| UNI CEN/TR 16017 : 2010 | GUIDE TO THE USE OF EN 598 |
| I.S. EN 15651-5:2017 | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 5: ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, MARKING AND LABELLING |
| ISO/PAS 28000:2005 | Specification for security management systems for the supply chain |
| DD ISO/PAS 28004:2006 | Security management systems for the supply chain. Guidelines for the implementation of ISO/PAS 28000 |
| UNI EN 14587-3 : 2012 | RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 3: WELDING IN ASSOCIATION WITH CROSSING CONSTRUCTION |
| 15/30295398 DC : 0 | BS EN 12081 - RAILWAY APPLICATIONS - AXLEBOXES - LUBRICATING GREASES |
| I.S. EN 13229:2001 | INSET APPLIANCES INCLUDING OPEN FIRES FIRED BY SOLID FUELS - REQUIREMENTS AND TEST METHODS |
| BS EN 60746-1:2003 | Expression of performance of electrochemical analyzers General |
| 11/30231856 DC : 0 | BS EN 14125 - THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS |
| UNI EN 1474-1 : 2009 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS |
| BS ISO 9000-2:1997 | Quality management and quality assurance standards Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003 |
| BS ISO/IEC 25000:2014 | Systems and software engineering. Systems and software Quality Requirements and Evaluation (SQuaRE). Guide to SQuaRE |
| API 17P : 2013 | DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA STRUCTURES AND MANIFOLDS |
| CSA ISO/IEC 21827 : 2009 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - SYSTEMS SECURITY ENGINEERING - CAPABILITY MATURITY MODEL (SSE-CMM) |
| PD ISO/TS 29001:2007 | Petroleum, petrochemical and natural gas industries. Sector-specific quality management systems. Requirements for product and service supply organizations |
| 14/30272915 DC : 0 | BS ISO 18400-106 - SOIL QUALITY - SAMPLING - PART 106: QUALITY CONTROL AND QUALITY ASSURANCE |
| IS/ISO 10002 : 2004(R2014) | QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR COMPLAINTS HANDLING IN ORGANIZATIONS |
| 12/30254917 DC : DRAFT JAN 2012 | BS EN 877 - CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| EN ISO 18797-1:2017 | Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 1: Elastomeric coating systems-polychloroprene or EPDM (ISO 18797-1:2016) |
| BS ISO 20858:2007 | Ships and marine technology. Maritime port facility security assessments and security plan development |
| CEN/TR 15628:2007 | Maintenance - Qualification of Maintenance personnel |
| BS EN 3537:2010 | Aerospace series. Nuts, anchor, self-locking, fixed, two lug, with counterbore, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315°C |
| PREN 1519-1 : DRAFT 2017 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLENE (PE) - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND THE SYSTEM |
| I.S. EN ISO 22000:2005 | FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS FOR ANY ORGANIZATION IN THE FOOD CHAIN |
| CSA Z24510 : 2010 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE ASSESSMENT AND FOR THE IMPROVEMENT OF THE SERVICE TO USERS |
| 11/30251988 DC : 0 | BS EN 14190 - GYPSUM PLASTERBOARD PRODUCTS FROM PROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| 11/30250685 DC : 0 | ISO/IEC DTS 17022 - CONFORMITY ASSESSMENT - REQUIREMENTS AND RECOMMENDATIONS FOR CONTENT OF A THIRD-PARTY AUDIT REPORT ON MANAGEMENT SYSTEMS |
| BS EN 2535:2011 | Aerospace series. Vacuum deposition of cadmium |
| I.S. CEN TS 14773:2004 | POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF LOSS AND SUBSTANTIAL DELAY IN PRIORITY AND FIRST CLASS SINGLE PIECE MAIL USING A SURVEY OF TEST LETTERS |
| I.S. EN ISO 11137-1:2015 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11137-1:2006, INCLUDING AMD 1:2013) |
| I.S. EN 61207-3:2002 | GAS ANALYZERS - EXPRESSION OF PERFORMANCE - PARAMAGNETIC OXYGEN ANALYZERS |
| DIN EN 9000-2:2000-11 (Draft) | AEROSPACE SERIES - AEROSPACE INDUSTRY QUALITY SYSTEM - PART 2: REQUIREMENTS APPLICABLE TO MAINTENANCE ORGANIZATIONS |
| CEI EN 61131-6 : 2013 | PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY |
| ISO 15175:2004 | Soil quality Characterization of soil related to groundwater protection |
| BS EN 1400 : 2013 | CHILD USE AND CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - SAFETY REQUIREMENTS AND TEST METHODS |
| DIN ISO 22006:2012-02 | Quality management systems - Guidelines for the application of ISO 9001:2008 to crop production (ISO 22006:2009) |
| I.S. EN 15322:2013 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| I.S. EN 12101-2:2017 | SMOKE AND HEAT CONTROL SYSTEMS - PART 2: NATURAL SMOKE AND HEAT EXHAUST VENTILATORS |
| ISO 55001:2014 | Asset management — Management systems — Requirements |
| 16/30329428 DC : 0 | BS EN 12566-6 - SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 6: PREFABRICATED TREATMENT UNITS FOR SEPTIC TANK EFFLUENT |
| CSA B625 : 2013 | PORTABLE TANKS FOR THE TRANSPORT OF DANGEROUS GOODS |
| UNI EN 15512 : 2009 | STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN |
| BS EN 60966-1:1999 | Radio frequency and coaxial cable assemblies Generic specification. General requirements and test methods |
| I.S. ISO 10005:2005 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY PLANS |
| DD ISO/TS 12805:2011 | Nanotechnologies. Materials specifications. Guidance on specifying nano-objects |
| S.R. CWA 16642:2013 | HEALTH CARE SERVICES - QUALITY CRITERIA FOR HEALTH CHECKS |
| I.S. EN 14528:2015 | BIDETS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| DD CEN ISO/TS 22391-7:2011 | Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) Guidance for the assessment of conformity |
| BS ISO/IEC 16326:2009 | Systems and software engineering. Life cycle processes. Project management |
| BS EN 16590-3:2014 | Tractors and machinery for agriculture and forestry. Safety-related parts of control systems Series development, hardware and software |
| 14/30287372 DC : 0 | BS EN 12897 - WATER SUPPLY - SPECIFICATION FOR INDIRECTLY HEATED UNVENTED (CLOSED) STORAGE WATER HEATERS |
| PREN ISO 11140-1 : DRAFT 2012 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS (ISO/DIS 11140-1:2012) |
| CEI UNI EN 45510-4-1 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4: BOILER AUXILIARIES - SECTION 1: EQUIPMENT FOR REDUCTION OF DUST EMISSIONS |
| 04/30103162 DC : DRAFT MARCH 2004 | EN 12094-5 - FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 5 - REQUIREMENTS AND TEST METHODS FOR HIGH AND LOW PRESSURE SELECTOR VALUES AND THEIR ACTUATORS |
| 17/30363845 DC : 0 | BS ISO 21927-3 - SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT EXHAUST VENTILATORS |
| PREN 598 : DRAFT 2017 | COATED AND LINED DUCTILE IRON PIPES, FITTINGS AND THEIR JOINTS FOR SEWERAGE AND DRAINAGE APPLICATIONS - PRODUCTS CHARACTERISTICS AND TEST AND ASSESSMENT METHODS |
| 15/30327431 DC : 0 | BS ISO 15741 - PAINTS AND VARNISHES - FRICTION-REDUCTION COATINGS FOR THE INTERIOR OF ON- AND OFFSHORE STEEL PIPELINES FOR NON-CORROSIVE GASES |
| BS EN 4071:2009 | Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambient temperature) / 425 °C |
| 13/30271601 DC : 0 | BS ISO 9635-1 - AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 1: GENERAL REQUIREMENTS |
| 09/30213196 DC : 0 | BS ISO 9149 - CORK WALLCOVERINGS IN ROLLS - SPECIFICATIONS |
| 13/30263819 DC : 0 | BS ISO 6966-2 - AIRCRAFT GROUND EQUIPMENT - BASIC REQUIREMENTS - PART 2: SAFETY REQUIREMENTS |
| ISO 22965-1:2007 | Concrete — Part 1: Methods of specifying and guidance for the specifier |
| DIN EN 9000-3:2000-11 (Draft) | AEROSPACE SERIES - AEROSPACE INDUSTRY QUALITY SYSTEM - PART 3: REQUIREMENTS APPLICABLE TO STOCKISTS-DISTRIBUTORS |
| SAE J20_201503 | COOLANT SYSTEM HOSES |
| 12/30258334 DC : 0 | BS EN 1013 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTIC SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| PD ISO/TS 20658:2017 | Medical laboratories. Requirements for collection, transport, receipt, and handling of samples |
| BS EN 61014:2003 | Programmes for reliability growth |
| ISO 18436-3:2012 | Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 3: Requirements for training bodies and the training process |
| 07/30150339 DC : 0 | BS ISO 27025 - SPACE SYSTEMS - PROGRAMME MANAGEMENT - QUALITY ASSURANCE REQUIREMENTS |
| DD ENV 61112:2002 | Blankets of insulating material for electrical purposes |
| S.R. CEN TR 15840:2009 | EVALUATION OF CONFORMITY OF FLY ASH FOR CONCRETE - GUIDELINES FOR THE APPLICATION OF EN 450-2 |
| ANSI/AAMI/ISO 13408-3:2006(R2015) | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 3: LYOPHILIZATION |
| BS EN ISO 2919:2014 | Radiological protection. Sealed radioactive sources. General requirements and classification |
| DIN EN 12449:2015-11 (Draft) | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
| I.S. EN ISO 11737-1:2018&LC:2018 | STERILIZATION OF HEALTH CARE PRODUCTS - MICROBIOLOGICAL METHODS - PART 1: DETERMINATION OF A POPULATION OF MICROORGANISMS ON PRODUCTS (ISO 11737-1:2018) |
| 10/30235503 DC : 0 | BS EN 61496-1 AMD 2 - SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS |
| DIN EN 15283-2:2009-12 | Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards (includes Amendment A1:2009) |
| DIN EN 1254-6:2012-12 | Copper and copper alloys - Plumbing fittings - Part 6: Fittings with push-fit ends |
| BS EN 15069:2008 | Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
| CEI EN 61400-22 : 2011 | WIND TURBINES - PART 22: CONFORMITY TESTING AND CERTIFICATION |
| BS EN 4636:2009 | Aerospace series. Screws, 100° countersunk head, six lobe recess, short thread, in titanium alloy TI-P64001, with aluminium pigmented coating. Classification: 1100 MPa (at ambient temperature) / 315°C |
| 09/30140724 DC : 0 | BS ISO 26000 - GUIDANCE ON SOCIAL RESPONSIBILITY |
| DIN EN 15593:2008-05 | Packaging - Management of hygiene in the production of packaging for foodstuffs - Requirements |
| BS ISO 25119-3:2010 | Tractors and machinery for agriculture and forestry. Safety-related parts of control systems Series development, hardware and software |
| BS EN 9104-003:2010 | Aerospace series. Quality management systems Requirements for aerospace quality management system (AQMS) auditor training and qualification |
| PREN 13859-2 : DRAFT 2013 | FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 2: UNDERLAYS FOR WALLS |
| 09/30197069 DC : 0 | BS EN 488 - DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - STEEL VALVE ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| DIN EN 16484:2016-02 | Leather - Requirements for the determination of the origin of leather production |
| 10/30233189 DC : 0 | BS EN 494 - FIBRE-CEMENT PROFILED SHEETS AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS |
| PREN 14141 : DRAFT 2011 | VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
| 08/30156642 DC : DRAFT JULY 2008 | BS ISO 25119-1 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN AND DEVELOPMENT |
| 04/30037050 DC : DRAFT JUNE 2004 | ISO/IEC 17021 - GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY OR ENVIRONMENTAL MANAGEMENT SYSTEMS |
| ISO 12576-1:2001 | Thermal insulation — Insulating materials and products for buildings — Conformity control systems — Part 1: Factory-made products |
| ISO 15198:2004 | Clinical laboratory medicine — In vitro diagnostic medical devices — Validation of user quality control procedures by the manufacturer |
| PREN 13279-1 : DRAFT 2017 | GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
| BS EN 45510-6-6:2000 | Guide for the procurement of power station equipment. Turbine auxiliaries Turbine auxiliaries. Wet and wet/dry cooling towers - Section 6: Wet/dry cooling towers |
| BS EN 15285:2008 | Agglomerated stone. Modular tiles for flooring and stairs (internal and external) |
| 13/30279579 DC : 0 | BS ISO 19372 - MICROTURBINES APPLICATIONS - SAFETY |
| BS EN 62703:2013 | Expression of performance of fluorometric oxygen analyzers in liquid media |
| 07/30162629 DC : 0 | BS ISO 4642-1 - RUBBER AND PLASTICS HOSES, NON-COLLAPSIBLE, FOR FIRE-FIGHTING SERVICE - PART 1: SEMI-RIGID HOSES FOR FIXED SYSTEMS |
| DIN EN 13245-2:2010-11 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes (includes Corrigendum AC:2009) |
| PD ISO/IEC TR 20000-5:2013 | Information technology. Service management Exemplar implementation plan for ISO/IEC 20000-1 |
| UNI EN 15014 : 2008 | PLASTICS PIPING SYSTEMS - BURIED AND ABOVE GROUND SYSTEMS FOR WATER AND OTHER FLUIDS UNDER PRESSURE - PERFORMANCE CHARACTERISTICS FOR PIPES, FITTINGS AND THEIR JOINTS |
| 00/625224 DC : DRAFT SEP 2000 | ISO/DIS 15489 INFORMATION AND DOCUMENTATION - RECORDS MANGEMENT |
| CSA Z245.20-Z245.21 : 2006 | EXTERNAL FUSION BOND EPOXY COATING FOR STEEL PIPE/EXTERNAL POLYETHYLENE COATING FOR PIPE |
| UNI EN 15593 : 2008 | PACKAGING - MANAGEMENT OF HYGIENE IN THE PRODUCTION OF PACKAGING FOR FOODSTUFFS - REQUIREMENTS |
| 10/30205098 DC : DRAFT JUNE 2010 | BS EN 13481-2 - RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 2: FASTENING SYSTEMS FOR CONCRETE SLEEPERS |
| 14/30311109 DC : 0 | BS EN 1453-1 - PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES AND THE SYSTEM |
| 12/30263172 DC : 0 | BS EN 1935 - BUILDING HARDWARE - SINGLE-AXIS HINGES - REQUIREMENTS AND TEST METHODS |
| BS ISO 18647:2017 | Petroleum and natural gas industries. Modular drilling rigs for offshore fixed platforms |
| BS ISO/IEC 40180:2017 | Information technology. Quality for learning, education and training. Fundamentals and reference framework Part : General approach |
| 13/30286753 DC : 0 | BS ISO 22004 - FOOD SAFETY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 22000 |
| BS EN 15001-2:2008 | Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for commissioning, operation and maintenance |
| DEFSTAN 00-55(PT2)/2(1997) : 1997 ERRATUM 1997 | REQUIREMENTS FOR SAFETY RELATED SOFTWARE IN DEFENCE EQUIPMENT - PART 2: GUIDANCE |
| BS EN 15512:2009 | Steel static storage systems. Adjustable pallet racking systems. Principles for structural design |
| UNI EN 13237 : 2012 | POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| PD CEN/TS 1852-2:2015 | Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP) Guidance for the assessment of conformity |
| UNI CEI ISO/IEC 12207 : 2013 | SYSTEMS AND SOFTWARE ENGINEERING - SOFTWARE LIFE CYCLE PROCESSES |
| PD ISO/TS 19158:2012 | Geographic information. Quality assurance of data supply |
| DIN EN 14695:2010-05 | Flexible sheets for waterproofing - Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics; German version EN 14695:2010 |
| EN 54-5:2017 | Fire detection and fire alarm systems - Part 5: Heat detectors - Point heat detectors |
| I.S. EN 50405:2015 | RAILWAY APPLICATIONS - CURRENT COLLECTION SYSTEMS - PANTOGRAPHS, TESTING METHODS FOR CONTACT STRIPS |
| PD ISO/IEC TS 24748-1:2016 | Systems and software engineering. Life cycle management Guidelines for life cycle management |
| BS ISO 13448-1:2005 | Acceptance sampling procedures based on the allocation of priorities principle (APP) Guidelines for the APP approach |
| 10/30207796 DC : 0 | BS ISO/IEC 15289 - SOFTWARE AND SYSTEMS ENGINEERING - CONTENT OF LIFE-CYCLE INFORMATION PRODUCTS |
| BS ISO 14964:2000 | Mechanical vibration and shock. Vibration of stationary structures. Specific requirements for quality management in measurement and evaluation of vibration |
| 04/30040790 DC : DRAFT MARCH 2004 | ISO/IEC DTR 15443-2 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - A FRAMEWORK FOR IT SECURITY ASSURANCE - PART 2 - ASSURANCE METHODS |
| BS EN 15682-2:2013 | Glass in building. Heat soaked thermally toughened alkaline earth silicate safety glass Evaluation of conformity/Product standard |
| 13/30280048 DC : 0 | BS EN 16590-2 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE |
| 08/30184786 DC : DRAFT JUNE 2008 | BS ISO/IEC 26513 - SOFTWARE AND SYSTEMS ENGINEERING - REQUIREMENTS FOR ASSESSORS AND TESTERS OF USER DOCUMENTATION |
| PD CEN ISO/TS 14907-1:2015 | Electronic fee collection. Test procedures for user and fixed equipment Description of test procedures |
| DIN ISO 15175:2005-05 | SOIL QUALITY - CHARACTERIZATION OF SOIL RELATED TO GROUNDWATER PROTECTION |
| 11/30236274 DC : 0 | BS ISO 7240-23 - FIRE DETECTION AND ALARM SYSTEMS - PART 23: VISUAL ALARM DEVICES |
| BIS IS/ISO 15189 : 2012 | MEDICAL LABORATORIES - REQUIREMENTS FOR QUALITY AND COMPETENCE |
| 06/30112971 DC : DRAFT JULY 2006 | ISO/IEC 62366 - MEDICAL DEVICES - APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
| 16/30337296 DC : 0 | BS EN ISO 12944-4 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 4: TYPES OF SURFACE AND SURFACE PREPARATION |
| BS ISO 2020-2:1997 | Aerospace. Preformed flexible steel wire rope for aircraft controls Technical specification |
| PD ISO/IEC TR 20000-3:2009 | Information technology. Service management Guidance on scope definition and applicability of ISO/IEC 20000-1 |
| BS ISO 28594:2017 | Combined accept-zero sampling systems and process control procedures for product acceptance |
| 11/30251994 DC : 0 | BS EN 13963 - JOINTING MATERIALS FOR GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| UNE-EN 16484:2016 | Leather - Requirements for the determination of the origin of leather production |
| ASTM F 2886 : 2017 : REDLINE | Standard Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications |
| I.S. EN 9320:2014 | AEROSPACE SERIES - PROGRAMME MANAGEMENT - GENERAL GUIDELINES FOR ACQUISITION AND SUPPLY OF OPEN SYSTEMS |
| 11/30251991 DC : 0 | BS EN 14195 - METAL FRAMING COMPONENTS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| PREN ISO 10380 : DRAFT 2011 | PIPEWORK - CORRUGATED METAL HOSES AND HOSE ASSEMBLIES |
| 03/304741 DC : DRAFT APR 2003 | IEC 60601-1-6 ED.1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-6: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD - USABILITY |
| PD ISO/IEC Guide 68:2002 | Arrangements for the recognition and acceptance of conformity assessment results |
| PD6677 : 2002 (R12) | IMPLEMENTATION GUIDE FOR NATO AQAP-160 INCORPORATING ALL AQAP-160 TEXT AND RELEVANT ISO TEXT |
| I.S. ISO 9000-2:1994 | QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - PART 2: GENERIC GUIDELINES FOR THE APPLICATION OF ISO 9001, ISO 9002 AND ISO 9003 |
| DD ISO/TS 16949 : 2009 | QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS |
| FM 2510 : 2014 | FLOOD ABATEMENT EQUIPMENT |
| PREN 13963 : DRAFT 2011 | JOINTING MATERIALS FOR GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN 15497 E : 2014 | STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| PREN 54-11 : DRAFT 2013 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 11: MANUAL CALL POINTS |
| 08/30171552 DC : DRAFT JAN 2008 | BS EN 13279-1 - GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
| CEI EN 61014 : 2006 | PROGRAMMES FOR RELIABILITY GROWTH |
| 15/30328781 DC : 0 | BS EN 13256 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF TUNNELS AND UNDERGROUND STRUCTURES |
| PREN 12368 : DRAFT 2014 | TRAFFIC CONTROL EQUIPMENT - SIGNAL HEADS |
| 14/30287226 DC : 0 | BS EN ISO 15378 - PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP) |
| BS EN ISO 14051:2011 | Environmental management. Material flow cost accounting. General framework |
| DIN EN 14509:2013-12 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| ISO 14955-1:2017 | Machine tools — Environmental evaluation of machine tools — Part 1: Design methodology for energy-efficient machine tools |
| 16/30333286 DC : 0 | BS ISO 14955-1 - MACHINE TOOLS - ENVIRONMENTAL EVALUATION OF MACHINE TOOLS - PART 1: DESIGN METHODOLOGY FOR ENERGY-EFFICIENT MACHINE TOOLS |
| ISO 28598-2:2017 | Acceptance sampling procedures based on the allocation of priorities principle (APP) — Part 2: Coordinated single sampling plans for acceptance sampling by attributes |
| BS EN 16590-2:2014 | Tractors and machinery for agriculture and forestry. Safety-related parts of control systems Concept phase |
| PREN 14180 : DRAFT 2012 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| ISO/IEC TS 17027:2014 | Conformity assessment — Vocabulary related to competence of persons used for certification of persons |
| S.R. CEN/TR 1317-6:2012 | ROAD RESTRAINT SYSTEMS - PART 6: PEDESTRIAN RESTRAINT SYSTEM - PEDESTRIAN PARAPETS |
| I.S. EN 124-2:2015 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 2: GULLY TOPS AND MANHOLE TOPS MADE OF CAST IRON |
| PREN 13479 : DRAFT 2014 | WELDING CONSUMABLES - GENERAL PRODUCT STANDARD FOR FILLER METALS AND FLUXES FOR FUSION WELDING OF METALLIC MATERIALS |
| PREN 54-20 : DRAFT 2014 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 20: ASPIRATING SMOKE DETECTORS |
| PREN 12897 : DRAFT 2014 | WATER SUPPLY - SPECIFICATION FOR INDIRECTLY HEATED UNVENTED (CLOSED) STORAGE WATER HEATERS |
| PREN 14528 : DRAFT 2014 | BIDETS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| PREN 14353 : DRAFT 2016 | METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| CSA G4 : 2015 | STEEL WIRE ROPE FOR GENERAL PURPOSE AND FOR MINE HOISTING AND MINE HAULAGE |
| I.S. EN ISO 14051:2011 | ENVIRONMENTAL MANAGEMENT - MATERIAL FLOW COST ACCOUNTING - GENERAL FRAMEWORK (ISO 14051:2011) |
| AAMI ISO 10993-1 : 2009 : R2013 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS |
| BS EN 61192-1:2003 | Workmanship requirements for soldered electronic assemblies General |
| 10/30218467 DC : 0 | BS ISO/IEC 29155-1 - SOFTWARE AND SYSTEMS ENGINEERING - INFORMATION TECHNOLOGY PROJECT PERFORMANCE BENCHMARKING FRAMEWORK - PART 1: CONCEPTS AND DEFINITIONS |
| UNI EN 13600 : 2013 | COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES |
| PREN 14604 : DRAFT 2016 | SMOKE ALARM DEVICES |
| PD ISO/IEC TR 29110-5-2-1:2016 | Systems and software engineering. Lifecycle profiles for Very Small Entities (VSEs) Organizational management guidelines |
| EN 50126-2:2017 | Railway Applications - The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) - Part 2: Systems Approach to Safety |
| PREN 15250 : DRAFT 2012 | SLOW HEAT RELEASE APPLIANCES FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| DIN EN 15224:2016-04 (Draft) | QUALITY MANAGEMENT SYSTEMS - EN ISO 9001:2015 FOR HEALTHCARE |
| ASTM F 1377 : 2013 : REDLINE | Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075) |
| DIN EN 14811:2016-08 (Draft) | RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
| DD ENV ISO 14253-2:2001 | Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipments Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
| 01/713049 DC : DRAFT SEP 2001 | PREN ISO 17662 - WELDING - CALIBRATION, VERIFICATION AND VALIDATION OF EQUIPMENT USED FOR WELDING, INCLUDING ANCILLARY ACTIVITIES |
| INCITS/ISO/IEC 24700 : 2008 | QUALITY AND PERFORMANCE OF OFFICE EQUIPMENT THAT CONTAINS REUSED COMPONENTS |
| 12/30262118 DC | BS ISO 14313 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
| 03/103789 DC : DRAFT FEB 2003 | BS ISO 10018 - COMPLAINTS HANDLING - GUIDELINES FOR ORGANIZATIONS |
| 05/19976781 DC : DRAFT JUN 2005 | BS ISO 15835 - STEEL FOR THE REINFORCMENT OF CONCRETE - MECHANICAL SPLICES FOR BARS - PART 1: REQUIREMENTS |
| DEFSTAN 05-96/1(1994) : INTERIM | GUIDANCE ON QUALITY SYSTEM REQUIREMENTS FOR THE IMPLEMENTATION OF DEF STAN 05-95/ISSUE 2 |
| BS EN ISO/IEC 17020:2012 | Conformity assessment. Requirements for the operation of various types of bodies performing inspection |
| PD ISO/IEC TR 90006:2013 | Information technology. Guidelines for the application of ISO 9001:2008 to IT service management and its integration with ISO/IEC 20000-1:2011 |
| DD ENV 1329-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
| PD CEN/TS 16555-1:2013 | Innovation Management Innovation Management System |
| ASTM F 1173 : 2001 | Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications |
| ISO 16049-2:2013 | Air cargo equipment Restraint straps Part 2: Utilization guidelines and lashing calculations |
| API 683 : 1993 | QUALITY IMPROVEMENT MANUAL FOR MECHANICAL EQUIPMENT IN PETROLEUM, CHEMICAL, AND GAS INDUSTRIES |
| CSA Z15882:09 (R2019) | Sterilization of health care products - Chemical indicators - Guidance for selection, use and interpretation of results (Adopted ISO 15882:2008, second edition, 2008-09-01) |
| 11/30239006 DC : 0 | BS EN 13237 - POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| DD ISO/PAS 17712:2006 | Freight containers. Mechanical seals |
| DD ENV ISO 14907-1:2001 | Road transport and traffic telematics (RTTT). Electronic fee collection (EFC). Test procedures for user and fixed equipment Description of test procedures |
| ISO 10799:2001 | Structural steels Cold-formed, welded, structural hollow sections Technical delivery requirements |
| BS EN 50126-2:2017 | Railway Applications. The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) Systems Approach to Safety |
| ISO/IEC TR 29110-5-3:2018 | Systems and software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 5-3: Service delivery guidelines |
| 04/30114492 DC : DRAFT JUNE 2004 | ISO/IEC 19796-1 - INFORMATION TECHNOLOGY - QUALITY MANAGEMENT, ASSURANCE, AND METRICS - PART 1: GENERAL APPROACH |
| DIN EN 15345:2008-02 | Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates |
| PD CEN/TS 1453-2:2017 | Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
| 14/30311454 DC : 0 | BS EN 14528 - BIDETS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| DIN EN 15381:2008-11 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN PAVEMENTS AND ASPHALT OVERLAYS |
| BS EN 60987:2015 | Nuclear power plants. Instrumentation and control important to safety. Hardware design requirements for computer-based systems |
| 15/30320777 DC : 0 | BS EN 14375 - CHILD-RESISTANT NON-RECLOSABLE PACKAGING FOR PHARMACEUTICAL PRODUCTS - REQUIREMENTS AND TESTING |
| 17/30347294 DC : 0 | BS EN 60076-22-1 - POWER TRANSFORMER AND REACTOR FITTINGS - PART 22-1: PROTECTIVE DEVICES |
| 10/30216811 DC : 0 | BS ISO 2919 - RADIATION PROTECTION - SEALED RADIOACTIVE SOURCES - GENERAL REQUIREMENTS AND CLASSIFICATION |
| PD CEN ISO/TR 25108:2006 | Non-destructive testing. Guidelines for NDT personnel training organizations |
| S.R. CEN/TS 12201-7:2014 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| BS ISO 18185-4:2007 | Freight containers. Electronic seals Data protection |
| 02/400385 DC : DRAFT APR 2002 | ISO 10007 - QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR CONFIGURATION MANAGEMENT |
| 02/107768 DC : DRAFT DEC 2002 | BS EN 74-1 - COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 1: COUPLERS FOR TUBES - REQUIREMENTS AND TEST PROCEDURES |
| DIN EN ISO 11135:2014-10 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014) |
| PREN 16855 : DRAFT 2015 | WALK-IN COLD ROOMS - DEFINITION, THERMAL INSULATION PERFORMANCE AND TEST METHODS - PART 1: PREFABRICATED COLD ROOM KITS |
| PREN 13658-1 : DRAFT 2017 | METAL LATH AND BEADS - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: INTERNAL PLASTERING |
| BS EN ISO 6789-1:2017 | Assembly tools for screws and nuts. Hand torque tools Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance |
| PREN 14811 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GRVED AND ASSOCIATED CONSTRUCTION |
| DD CEN ISO/TS 14907-1:2010 | Electronic fee collection. Test procedures for user and fixed equipment Description of test procedures |
| BS ISO 15175 : 2004 | SOIL QUALITY - CHARACTERIZATION OF SOIL RELATED TO GROUNDWATER PROTECTION |
| BS HB10218(2002) : 2002 | ISO 9000:2000 - ACHIEVING REGISTRATION |
| 15/30278562 DC : 0 | BS ISO 18797-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS - POLYCHLOROPRENE OR EPDM |
| 17/30300276 DC : 0 | BS ISO 19443 - QUALITY MANAGEMENT SYSTEMS - SPECIFIC REQUIREMENTS FOR THE APPLICATION OF ISO 9001 AND IAEA GS-R REQUIREMENTS BY ORGANIZATIONS IN THE SUPPLY CHAIN OF THE NUCLEAR ENERGY SECTOR |
| BS ISO 12319:2006 | Aerospace. \'P\' (loop style) clamps. Procurement specification |
| PD CEN/TS 1455-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Guidance for the assessment of conformity |
| I.S. EN 62366-1:2015/AC:2015 | MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
| PD ISO/IEC TR 15504-6:2008 | Information technology. Process assessment An exemplar system life cycle process assessment model |
| DD CEN/TS 13476-4:2008 | Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Guidance for the assessment of conformity |
| BS EN 12966:2014 | Road vertical signs. Variable message traffic signs |
| 16/30338304 DC : 0 | BS ISO/ASTM 52903-1 - ADDITIVE MANUFACTURING - STANDARD SPECIFICATION FOR MATERIAL EXTRUSION BASED ADDITIVE MANUFACTURING OF PLASTIC MATERIALS - PART 1: FEEDSTOCK MATERIALS |
| OIML G 21 : 2017 | GUIDANCE FOR DEFINING THE REQUIREMENTS FOR A CERTIFICATION SYSTEM FOR PREPACKAGES |
| CSA ISO/TR 13121 : 2013 | NANOTECHNOLOGIES - NANOMATERIAL RISK EVALUATION |
| PD ISO/IEC TR 17026:2015 | Conformity assessment. Example of a certification scheme for tangible products |
| CEI UNI 70018 : 2009 | CONFORMITY ASSESSMENT - GUIDANCE ON THE USE OF AN ORGANIZATION'S QUALITY MANAGEMENT SYSTEM IN PRODUCT CERTIFICATION |
| 06/30145607 DC : DRAFT FEB 2006 | ISO/DIS 8873-2 - RIGID CELLULAR PLASTICS - SPRAY-APPLIED POLYURETHANE FOAM - PART 2: APPLICATION |
| BS EN 10343:2009 | Steels for quenching and tempering for construction purposes. Technical delivery conditions |
| DD ENV 1453-2:2001 | Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
| CEI 14-4/8 : 2001 | POWER TRANSFORMERS - APPLICATION GUIDE |
| BS EN 16271:2012 | Value management. Functional expression of the need and functional performance specification. Requirements for expressing and validating the need to be satisfied within the process of purchasing or obtaining a product |
| PREN 54-10 : DRAFT 2012 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 10: FLAME DETECTORS - POINT DETECTORS |
| S.R. CWA 16597:2013 | FISHBIZZ BUSINESS CASE - FOR MONITORING OF QUALITY AND SALES OF FISH PRODUCTS |
| PREN 12050-2 : DRAFT 2012 | WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PRINCIPLES OF CONSTRUCTION AND TESTING - PART 2: LIFTING PLANTS FOR FAECAL-FREE WASTEWATER |
| BS EN 50581:2012 | Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances |
| DIN EN 14636-2:2010-04 | Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC) - Part 2: Manholes and inspection chambers |
| 17/30351717 DC : 0 | BS EN ISO 11607-1 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
| BS EN 61478:2001 | Live working. Ladders of insulating material |
| 17/30354844 DC : 0 | BS ISO 55002 - ASSET MANAGEMENT - MANAGEMENT SYSTEMS - GUIDELINES FOR THE APPLICATION OF ISO 55001 |
| BS ISO 28000:2007 | Specification for security management systems for the supply chain |
| 13/30281408 DC : 0 | BS EN 61869-10 - INSTRUMENT TRANSFORMERS - PART 10: ADDITIONAL REQUIREMENTS FOR LOW-POWER, STAND-ALONE CURRENT SENSORS |
| 04/30090376 DC : DRAFT DEC 2004 | ISO 13408-3 - ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 3: LYOPHILIZATION |
| PREN 572-9 : DRAFT 2017 | GLASS IN BUILDING - BASIC SODA LIME SILICATE GLASS PRODUCTS - PART 9: PRODUCT STANDARD |
| BS ISO 13448-2:2004 | Acceptance sampling procedures based on the allocation of priorities principles (APP) Coordinated single sampling plans for acceptance sampling by attributes |
| 02/103630 DC : DRAFT MAY 2002 | PREN 12446 - CHIMNEYS - COMPONENTS - CONCRETE OUTER WALL ELEMENTS |
| PD 6538:1993 | Vision 2000. A strategy for international standards\' implementation in the quality arena during the 1990s |
| 11/30247885 DC : 0 | BS EN 9103 - AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - VARIATION MANAGEMENT OF KEY CHARACTERISTICS |
| CEI EN 61897 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS |
| S.R. CEN/TS 1455-2:2012 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| CSA C61400-3 : 2011 : R2016 | WIND TURBINES - PART 3: DESIGN REQUIREMENTS FOR OFFSHORE WIND TURBINES |
| 13/30280041 DC : 0 | BS EN 16590-1 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN AND DEVELOPMENT |
| 13/30279690 DC : 0 | BS EN 16250-1 - LEVELS OF PERFORMANCE AND ACCEPTANCE FOR STREET CLEANING AND MUNICIPAL WASTE MANAGEMENT SERVICES - PART 1: GENERAL REQUIREMENTS |
| DIN EN 14535-2:2011-09 | RAILWAY APPLICATIONS - BRAKE DISCS FOR RAILWAY ROLLING STOCK - PART 2: BRAKE DISCS MOUNTED ONTO THE WHEEL, DIMENSIONS AND QUALITY REQUIREMENTS |
| UNI CEN/TS 1455-2 : 2012 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| I.S. EN 45510-4-9:1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-9: BOILER AUXILIARIES - SOOTBLOWERS |
| PD CEN/TS 12666-2:2012 | Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE) Guidance for the assessment of conformity |
| BS EN 16484:2015 | Leather. Requirements for the determination of the origin of leather production |
| 16/30329864 DC : 0 | BS IEC 63000 - TECHNICAL DOCUMENTATION FOR THE ASSESSMENT OF ELECTRICAL AND ELECTRONIC PRODUCTS WITH RESPECT TO THE RESTRICTION OF HAZARDOUS SUBSTANCES |
| 02/647837 DC : DRAFT OCT 2002 | PD 0026 - SOFTWARE AND SYSTEM QUALITY FRAMEWORK |
| 06/30106186 DC : 0 | ISO 10993-1 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT SYSTEM |
| BS EN 62430:2009 | Environmentally conscious design for electrical and electronic products |
| 17/30355975 DC : 0 | BS ISO 14375 - CHILD-RESISTANT NON-RECLOSABLE PACKAGING FOR PHARMACEUTICAL PRODUCTS - REQUIREMENTS AND TESTING |
| 09/30184483 DC : 0 | BS EN 54-3 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS |
| API 6DSS : 2017-08 | SPECIFICATION FOR SUBSEA PIPELINE VALVES |
| 05/30138310 DC : DRAFT AUG 2005 | ISO 15882 ED 2 - STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS |
| 08/30189631 DC : DRAFT SEP 2008 | BS EN 50215 - RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE |
| 10/30212556 DC : 0 | BS EN 13282-3 - HYDRAULIC ROAD BINDERS - PART 3: CONFORMITY EVALUATION |
| 12/30259207 DC : DRAFT JUNE 2012 | BS EN 13984 - FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER VAPOUR CONTROL LAYERS - DEFINITIONS AND CHARACTERISTICS |
| CSA ISO/IEC 15504-4 : 2005 : R2015 | INFORMATION TECHNOLOGY - PROCESS ASSESSMENT - PART 4: GUIDANCE ON USE FOR PROCESS IMPROVEMENT AND PROCESS CAPABILITY DETERMINATION |
| SAE AS 5553B : 2016 | COUNTERFEIT ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL (EEE) PARTS; AVOIDANCE, DETECTION, MITIGATION, AND DISPOSITION |
| AAMI ISO 17665-1 : 2006 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| AAMI ISO 11140-4 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 4: CLASS 2 INDICATORS AS AN ALTERNATIVE TO THE BOWIE AND DICK-TYPE TEST FOR DETECTION OF STEAM PENETRATION |
| 08/30195548 DC : 0 | DD ISO/TS 16949: 2009 - QUALITY MANAGEMENT SYSTEMS: PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS |
| 06/30084693 DC : 0 | BS ISO 15392 - SUSTAINABILITY IN BUILDING CONSTRUCTION - GENERAL PRINCIPLES |
| BS EN 45510-3-3:2000 | Guide for the procurement of power station equipment. Boilers Boilers with fluidized bed firing - Section 3: Boilers with fluidised bed firing |
| CSA Z245.6:2006 | COILED ALUMINUM LINE PIPE AND ACCESSORIES |
| 02/540596 DC : DRAFT JULY 2002 | PREN 54-17 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 17: SHORT CIRCUIT ISOLATORS |
| S.R. CEN/TS 12200-2:2017 | PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| CSA E432.2 : 1998 : INC : UPD 1 : 1998 : R2012 | SAFETY SPECIFICATIONS FOR INCANDESCENT LAMPS - TUNGSTEN HALOGEN LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES |
| DD ISO/TS 29001 : 2010 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SECTOR-SPECIFIC QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR PRODUCT AND SERVICE SUPPLY ORGANIZATIONS |
| CSA ISO 10014 : 2006 : R2016 | QUALITY MANAGEMENT - GUIDELINES FOR REALIZING FINANCIAL AND ECONOMIC BENEFITS |
| CSA ISO 10001 : 2008 : R2017 | QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR CODES OF CONDUCT FOR ORGANIZATIONS |
| ISO 6789-2:2017 | Assembly tools for screws and nuts — Hand torque tools — Part 2: Requirements for calibration and determination of measurement uncertainty |
| 07/30167951 DC : 0 | BS EN 60076-1 - POWER TRANSFORMERS - PART 1: GENERAL |
| API 20A : 2017 | CARBON STEEL, ALLOY STEEL, STAINLESS STEEL, AND NICKEL BASE ALLOY CASTINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
| BS EN ISO 3266 : 2010 | FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010+A1:2015) |
| CSA Z1416: 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| ASTM F 2384 : 2010 | Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901) |
| CSA ISO/IEC 15288 : 2009 : R2014 | SYSTEMS AND SOFTWARE ENGINEERING - SYSTEM LIFE CYCLE PROCESSES |
| ASTM F 998 : 2012 | Standard Specification for Centrifugal Pump, Shipboard Use |
| ISO 13485:2016 | Medical devices Quality management systems Requirements for regulatory purposes |
| UNE-EN 16280:2013 | Breath alcohol test devices for general public - Requirements and test methods |
| CSA ISO 10001:2008 | QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR CODES OF CONDUCT FOR ORGANIZATIONS |
| BS EN 60794-4-10:2014 | Optical fibre cables Family specification. Optical ground wires (OPGW) along electrical power lines |
| BIS IS/ISO 10012 : 2003(R2009) | MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT |
| IEEE 20000-2-2013 | IEEE Standard -- Adoption of ISO/IEC 20000-2:2012, Information technology -- Service management -- Part 2: Guidance on the application of service management systems |
| PD CEN/TR 15419:2017 | Protective clothing. Guidelines for selection, use, care and maintenance of chemical protective clothing |
| BS ISO 9631:2018 | Rubber seals. Joint rings for pipelines for hot-water supply up to 110 °C. Specification for the material |
| CSAISO 10007 : 2003 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR CONFIGURATION MANAGEMENT |
| CSA Z11135-1 :2009 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 06/30157853 DC : 0 | BS EN 10255 AMD 1 - NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS |
| UNE-EN 14587-3:2013 | Railway applications - Track - Flash butt welding of rails - Part 3: Welding in association with crossing construction |
| UNI EN 13601 : 2013 | COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
| CSA ISO/IEC 12207 : 2009 : R2014 | SYSTEMS AND SOFTWARE ENGINEERING - SOFTWARE LIFE CYCLE PROCESSES |
| GR 1252 CORE : ISSUE 1 | QUALITY SYSTEM GENERIC REQUIREMENTS FOR HARDWARE |
| PREN 14904-1 : DRAFT 2017 | SURFACES FOR SPORTS AREAS - MULTI-SPORTS FLOOR SYSTEMS FOR INDOOR USE - PART 1: ESSENTIAL CHARACTERISTICS |
| CSA ISO/TR 10017 : 2003 : R2013 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| CSA Z11135 : 2015 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| UNE-EN 15221-3:2012 | Facility Management - Part 3: Guidance on quality in Facility Management |
| CSA ISO/TS 16949 : 2009(R2015) | QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS |
| I.S. EN ISO 12944-4:2017 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 4: TYPES OF SURFACE AND SURFACE PREPARATION (ISO 12944-4:2017) |
| ISO 10799-1:2011 | Cold-formed welded structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions |
| ASTM F 1173 : 2001 : R2006 | Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications |
| NF ISO/IEC 12207 : 1995 | INFORMATION TECHNOLOGY - SOFTWARE ENGINEERING - SOFTWARE LIFE-CYCLE PROCESSES |
| PREN 50405 : DRAFT 2014 | RAILWAY APPLICATIONS - CURRENT COLLECTION SYSTEMS - PANTOGRAPHS, TESTING METHODS FOR CARBON CONTACT STRIPS |
| UNI EN 10340 : 2008 | STEEL CASTINGS FOR STRUCTURAL USES |
| CSA TELECOM ORGANIZATIONS PACKAGE : 2018 | CONSISTS OF CAN/CSA-ISO/IEC 27000:18 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY; CAN/CSA-ISO/IEC 27001:14, INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - REQUIREMENTS; CAN/CSA-ISO/IEC 27002:15 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - CODE OF PRACTICE FOR |
| UNI EN 16240 : 2014 | LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| 05/30136043 DC : DRAFT JUL 2005 | EN 15282 - VITREOUS AND PORCELAIN ENAMELS - DESIGN OF VITREOUS ENAMEL COATED BOLTED STEEL TANKS FOR THE STORAGE OR TREATMENT OF WATER OR MUNICIPAL OR INDUSTRIAL EFFLUENTS |
| UNE-EN 12899-2:2010 | Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB) |
| UNE-CEN/TS 1555-7:2015 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity |
| AAMI TIR59:2017 | INTEGRATING HUMAN FACTORS INTO DESIGN CONTROLS |
| MIL-HDBK-896 Revision A:2016 | MANUFACTURING MANAGEMENT PROGRAM GUIDE |
| CSA C1325 : 1999 : R2016 | INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| 02/104192 DC : DRAFT JUN 2002 | EN 1856-1 - CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 1: SYSTEM CHIMNEY PRODUCTS |
| PD CEN/TR 15276-1:2009 | Fixed firefighting systems. Condensed aerosol extinguishing systems Requirements and test methods for components |
| UNI CEN/TS 15511 : 2008 | POSTAL SERVICES - QUALITY OF SERVICE - INFORMATION AVAILABLE ON POSTAL SERVICES |
| EI 1570 : 2012 | HANDBOOK ON ELECTRONIC SENSORS FOR THE DETECTION OF PARTICULATE MATTER AND/OR FREE WATER DURING AIRCRAFT REFUELLING |
| CAN/CSA-ISO/IEC 15426-1-07 (R2017) | Information Technology - Automatic Identification and Data Capture Techniques - Bar Code Verifier Conformance Specification - Part 1: Linear Symbols (Adopted ISO/IEC 15426-1:2006, second edition, 2006-06-01) |
| 08/30133979 DC : DRAFT MAY 2008 | BS ISO 23409 - MALE CONDOMS - REQUIREMENTS AND TEST METHODS FOR CONDOMS MADE FROM SYNTHETIC MATERIALS |
| CSA ISO/IEC 15504-4 : 2005 : R2010 | INFORMATION TECHNOLOGY - PROCESS ASSESSMENT - PART 4: GUIDANCE ON USE FOR PROCESS IMPROVEMENT AND PROCESS CAPABILITY DETERMINATION |
| CEI UNI 70019 : 2008 | CONFORMITY ASSESSMENT ARRANGEMENTS FOR THE RECOGNITION AND ACCEPTANCE OF CONFORMITY ASSESSMENT RESULTS |
| CEI UNI EN 45510-3-2 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 3-2: BOILERS - SHELL BOILERS |
| INCITS/ISO/IEC 10967-1 : 1994 | INFORMATION TECHNOLOGY - LANGUAGE INDEPENDENT ARITHMETIC - PART 1: INTEGER AND FLOATING POINT ARITHMETIC |
| ASTM F 3055 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
| CSA ISO TS 16949 : 2009 | QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS |
| I.S. EN 1254-3:1998 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 3: FITTINGS WITH COMPRESSION ENDS FOR USE WITH PLASTICS PIPES |
| I.S. EN 54-12:2015 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 12: SMOKE DETECTORS - LINE DETECTORS USING AN OPTICAL BEAM |
| 09/30197779 DC : 0 | BS ISO 7240-25 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO TRANSMISSION PATHS |
| ISO 10327:2014 | Air cargo Main deck containers Design and testing |
| CSA ISO/IEC 15504-4 : 2005 | INFORMATION TECHNOLOGY - PROCESS ASSESSMENT - PART 4: GUIDANCE ON USE FOR PROCESS IMPROVEMENT AND PROCESS CAPABILITY DETERMINATION |
| CSA ISO 14937 : 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| EN 1279-6:2002 | Glass in building - Insulating glass units - Part 6: Factory production control and periodic tests |
| PREN 2755 : 200P3 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER - ELEVATED LOAD AT AMBIENT TEMPERATURE - TECHNICAL SPECIFICATION |
| PREN 14620-1 : DRAFT 2003 | DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED STEEL TANKS FOR THE STORAGE OF REFRIGERATED, LIQUEFIED GASES WITH OPERATING TEMPERATURES BETWEEN -5 DEGREES C AND -165 DEGREES C - PART 1: GENERAL |
| DIN EN 15655:2016-07 (Draft) | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS |
| CEN/TR 15472:2006 | Postal services - Measurement of transit times for parcels by the use of a track and trace system |
| UNE-EN 1317-5:2008 | Road restraint systems - Part 5: Product requirements and evaluation of conformity for vehicle restraint systems |
| ISO 23409:2011 | Male condoms Requirements and test methods for condoms made from synthetic materials |
| PREN 14342 : DRAFT 2011 | WOOD FLOORING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| ISO 17258:2015 | Statistical methods Six Sigma Basic criteria underlying benchmarking for Six Sigma in organisations |
| UNE-ISO 2230:2012 | Rubber products. Guidelines for storage |
| I.S. EN 2535:2011 | AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM |
| CSA N292.5 : 2011 : R2016 | GUIDELINE FOR THE EXEMPTION OR CLEARANCE FROM REGULATORY CONTROL OF MATERIALS THAT CONTAIN, OR POTENTIALLY CONTAIN, NUCLEAR SUBSTANCES |
| CSA ISO 10014:2006 | QUALITY MANAGEMENT - GUIDELINES FOR REALIZING FINANCIAL AND ECONOMIC BENEFITS |
| UNE-EN 15286:2013 | Agglomerated stone - Slabs and tiles for wall finishes (internal and external) |
| CEN/TR 16017:2010 | Guide to the use of EN 598 |
| PREN 1254-6 : DRAFT 2011 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 6: FITTING WITH PUSH-FIT ENDS |
| ANSI TR 31004 : 2014 | RISK MANAGEMENT - GUIDANCE FOR THE IMPLEMENTATION OF ISO 31000 |
| CSA B480 :2002 | CUSTOMER SERVICE STANDARD FOR PEOPLE WITH DISABILITIES |
| CSA ISO/IEC 14598-4 : 2002 : R2010 | SOFTWARE ENGINEERING - PRODUCT EVALUATION - PART 4: PROCESS FOR ACQUIRERS |
| CSA Z11140.1 : 2007 : R2012 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
| UNE-ISO 19600:2015 | Compliance management systems. Guidelines. |
| UNE-ISO 17258:2017 | Statistical methods -- Six Sigma -- Basic criteria underlying benchmarking for Six Sigma in organizations |
| IEEE 26513-2010 | IEEE Standard for Adoption of ISO/IEC 26513:2009 Systems and Software Engineering--Requirements for Testers and Reviewers of Documentation |
| SAE AMS 7002 : 2018 | PROCESS REQUIREMENTS FOR PRODUCTION OF METAL POWDER FEEDSTOCK FOR USE IN ADDITIVE MANUFACTURING OF AEROSPACE PARTS |
| CSA ISO TR 14062 : 2003 | ENVIRONMENTAL MANAGEMENT - INTEGRATING ENVIRONMENTAL ASPECTS INTO PRODUCT DESIGN AND DEVELOPMENT |
| AAMI ISO 11607-1 : 2006 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS, AND PACKAGING SYSTEMS |
| API Q1 PORTUGUESE : 2013 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR MANUFACTURING ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRY |
| PREN 4700-005 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| PREN 9137 : 200P1 | QUALITY MANAGEMENT SYSTEMS - GUIDANCE FOR THE APPLICATION OF AQAP 2110 WITHIN AN EN 9100 QUALITY MANAGEMENT SYSTEM |
| TR 9135 : 1 | AEROSPACE SERIES - QUALITY SYSTEMS - SPECIFIC QUALITY REQUIREMENTS FOR NATO SUPPLIERS |
| UNI EN 12273 : 2008 | SLURRY SURFACING - REQUIREMENTS |
| UNI ISO 7240-19 : 2010 | FIRE DETECTION AND ALARM SYSTEMS - PART 19: DESIGN, INSTALLATION, COMMISSIONING AND SERVICE OF SOUND SYSTEMS FOR EMERGENCY PURPOSES |
| CSA Z662.1 : 2013 | COMMENTARY ON CSA Z662-07, OIL AND GAS PIPELINE SYSTEMS |
| ASTM F 1472 : 2014 : REDLINE | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
| S.R. CEN ISO/TS 13972:2015 | HEALTH INFORMATICS - DETAILED CLINICAL MODELS, CHARACTERISTICS AND PROCESSES (ISO/TS 13972:2015) |
| ISO/IEC 29110-3-2:2018 | Systems and software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 3-2: Conformity certification scheme |
| ASTM F 90 : 2014 : REDLINE | Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605) |
| TR 3040-1 : 5 | AEROSPACE SERIES - QUALITY ASSURANCE - EN AEROSPACE PRODUCTS - PART 1 - LIST OF APPROVED MANUFACTURERS |
| PREN 4700-003 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| PREN 9000-1 : 200P3 | AEROSPACE SERIES - AEROSPACE INDUSTRY QUALITY SYSTEM - PART 1: REQUIREMENTS APPLICABLE TO SUPPLIERS |
| ISO 45001:2018 | Occupational health and safety management systems — Requirements with guidance for use |
| SAE AS 9006 : 2013 | DELIVERABLE AEROSPACE SOFTWARE SUPPLEMENT FOR AS9100A - QUALITY MANAGEMENT SYSTEMS - AEROSPACE - REQUIREMENTS FOR SOFTWARE |
| DIN EN ISO 3183:2013-03 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| PREN 4700-006 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| ISO 11737-1:2018 | Sterilization of health care products — Microbiological methods — Part 1: Determination of a population of microorganisms on products |
| ASTM F 3273 : 2017 | Standard Specification for Wrought Molybdenum-47.5 Rhenium Alloy for Surgical Implants (UNS R03700) |
| ISO 8873-2:2007 | Rigid cellular plastics Spray-applied polyurethane foam for thermal insulation Part 2: Application |
| I.S. EN 16582-2:2015 | DOMESTIC SWIMMING POOLS - PART 2: SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR INGROUND POOLS |
| TR 9109 : 1 | AEROSPACE SERIES - GUIDELINES FOR SOFTWARE QUALITY MANAGEMENT |
| ISO 9000-2:1997 | Quality management and quality assurance standards — Part 2: Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003 |
| I.S. EN 16590-1:2014 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY - RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN AND DEVELOPMENT (ISO 25119-1:2010 MODIFIED) |
| ISO 8402:1994 | Quality management and quality assurance — Vocabulary |
| S.R. CLC/TS 50537-3:2010 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 3: WATER PUMP FOR TRACTION CONVERTERS |
| EN 13411-7:2006+A1:2008 | Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket |
| IWA 1:2005 | Quality management systems Guidelines for process improvements in health service organizations |
| PREN 54-12 : DRAFT 2009 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 12: SMOKE DETECTORS - LINE DETECTORS USING AN OPTICAL BEAM |
| ISO 16831:2012 | Non-destructive testing — Ultrasonic testing — Characterization and verification of ultrasonic thickness measuring equipment |
| CEI EN 50155 : 2008 | RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK |
| I.S. EN 16497-2:2017 | CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 2: BALANCED FLUE APPLICATIONS |
| I.S. EN 74-2:2008 | COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES |
| CEI UNI EN 45510-5-4 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-4: HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES |
| ISO 12319:2006 | Aerospace 'P' (loop style) clamps Procurement specification |
| GOST R ISO/TR 10014 : 2005 | GUIDELINES FOR MANAGING THE ECONOMICS OF QUALITY |
| I.S. EN 60694:1999 | COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS |
| AQAP 110 : 2 | NATO QUALITY ASSURANCE REQUIREMENTS FOR DESIGN, DEVELOPMENT AND PRODUCTION |
| I.S. EN 16747:2015 | MARITIME AND PORT SECURITY SERVICES |
| I.S. EN 61478:2002 | LIVE WORKING - LADDERS OF INSULATING MATERIAL |
| I.S. EN 1090-1:2009 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS |
| I.S. EN 15345:2007 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES |
| I.S. EN 15267-2:2009 | AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 2: INITIAL ASSESSMENT OF THE AMS MANUFACTURER'S QUALITY MANAGEMENT SYSTEM AND POST CERTIFICATION SURVEILLANCE FOR THE MANUFACTURING PROCESS |
| ISO/IEC 19796-3:2009 | Information technology — Learning, education and training — Quality management, assurance and metrics — Part 3: Reference methods and metrics |
| 18/30368654 DC : 0 | BS EN 488 - DISTRICT HEATING PIPES - BONDED SINGLE PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FACTORY MADE STEEL VALVE ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND A CASING OF POLYETHYLENE |
| I.S. EN 61174:2015 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - ELECTRONIC CHART DISPLAY AND INFORMATION SYSTEM (ECDIS) - OPERATIONAL AND PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS |
| I.S. EN 15927:2010 | SERVICES OFFERED BY HEARING AID PROFESSIONALS |
| I.S. EN 12273:2008 | SLURRY SURFACING - REQUIREMENTS |
| AWS B5.1 : 2013 | SPECIFICATION FOR THE QUALIFICATION OF WELDING INSPECTORS |
| I.S. EN 15358:2011 | SOLID RECOVERED FUELS - QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THEIR APPLICATION TO THE PRODUCTION OF SOLID RECOVERED FUELS |
| SAE AS 9110 : 2016 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION MAINTENANCE ORGANIZATIONS |
| ISO/TS 20658:2017 | Medical laboratories — Requirements for collection, transport, receipt, and handling of samples |
| PREN 13967 : DRAFT 2011 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF SHEETS INCLUDING PLASTIC AND RUBBER BASEMENT TANKING SHEET - DEFINITIONS AND CHARACTERISTICS |
| I.S. EN ISO 6789-1:2017 | ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - PART 1: REQUIREMENTS AND METHODS FOR DESIGN CONFORMANCE TESTING AND QUALITY CONFORMANCE TESTING: MINIMUM REQUIREMENTS FOR DECLARATION OF CONFORMANCE (ISO 6789-1:2017) |
| BS EN ISO 7396-1:2016 | Medical gas pipeline systems Pipeline systems for compressed medical gases and vacuum |
| S.R. CEN TS 15399:2007 | GAS SUPPLY SYSTEMS - GUIDELINES FOR MANAGEMENT SYSTEMS FOR GAS DISTRIBUTION NETWORK |
| IEEE/ISO/IEC 14764-2006 | ISO/IEC/IEEE International Standard for Software Engineering - Software Life Cycle Processes - Maintenance |
| CEI EN 60746-1 : 2003 | EXPRESSION OF PERFORMANCE OF ELECTROCHEMICAL ANALYZERS - PART 1: GENERAL |
| CEI CLC/TS 50537-2 : 2011 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 2: PUMP FOR INSULATING LIQUID FOR TRACTION TRANSFORMERS AND REACTORS |
| S.R. CEN ISO TR 24094:2007 | ANALYSIS OF NATURAL GAS - VALIDATION METHODS FOR GASEOUS REFERENCE MATERIALS |
| S.R. CEN/TS 1566-2:2012 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY |
| DIN EN 13310:2015-09 | KITCHEN SINKS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 62430:2009 | ENVIRONMENTALLY CONSCIOUS DESIGN FOR ELECTRICAL AND ELECTRONIC PRODUCTS |
| BS EN 60079-19 : 2011 | EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION |
| BS EN 14353 : 2007 | METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 3691-6:2015 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 6: BURDEN AND PERSONNEL CARRIERS (ISO 3691-6:2013) |
| ISO 15348:2002 | Pipework Metal bellows expansion joints General |
| I.S. EN 13282-3:2015 | HYDRAULIC ROAD BINDERS - PART 3: CONFORMITY EVALUATION |
| AAMI ISO 13408-3:2006 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 3: LYOPHILIZATION |
| ANSI/AAMI/ISO 11135:2014 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. EN 16853:2017 | CONSERVATION OF CULTURAL HERITAGE - CONSERVATION PROCESS - DECISION MAKING, PLANNING AND IMPLEMENTATION |
| I.S. CEN TR 15472:2006 | POSTAL SERVICES - MEASUREMENT OF TRANSIT TIMES FOR PARCELS BY THE USE OF A TRACK AND TRACE SYSTEM |
| I.S. EN 61069-8:2016 | INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 8: ASSESSMENT OF OTHER SYSTEM PROPERTIES |
| I.S. EN ISO 11133:2014 | MICROBIOLOGY OF FOOD, ANIMAL FEED AND WATER - PREPARATION, PRODUCTION, STORAGE AND PERFORMANCE TESTING OF CULTURE MEDIA (ISO/DIS 11133:2012) |
| I.S. EN 61479:2001 | LIVE WORKING - FLEXIBLE CONDUCTOR COVERS (LINE HOSES) OF INSULATING MATERIAL |
| I.S. EN 12566-7:2016 | SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 7: PREFABRICATED TERTIARY TREATMENT UNITS |
| CSA C61400-2:2008 | WIND TURBINES - PART 2: DESIGN REQUIREMENTS FOR SMALL WIND TURBINES |
| S.R. CLC/TS 50537-2:2010 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 2: PUMP FOR INSULATING LIQUID FOR TRACTION TRANSFORMERS AND REACTORS |
| ISO/IEC 29155-1:2017 | Systems and software engineering — Information technology project performance benchmarking framework — Part 1: Concepts and definitions |
| BS EN 50575 : 2014 | POWER, CONTROL AND COMMUNICATION CABLES - CABLES FOR GENERAL APPLICATIONS IN CONSTRUCTION WORKS SUBJECT TO REACTION TO FIRE REQUIREMENTS |
| I.S. EN 61192-1:2003 | WORKMANSHIP REQUIREMENTS FOR SOLDERED ELECTRONIC ASSEMBLIES - GENERAL |
| IWA 4:2009 | Quality management systems Guidelines for the application of ISO 9001:2008 in local government |
| BS EN 16153 : 2013 | LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 12467:2012 | FIBRE-CEMENT FLAT SHEETS - PRODUCT SPECIFICATION AND TEST METHODS |
| I.S. EN 1474-3:2008 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 3: OFFSHORE TRANSFER SYSTEMS |
| ISO 3999-1:2000 | Radiation protection Apparatus for industrial gamma radiography Part 1: Specifications for performance, design and tests |
| BS EN 50341-1:2012 | Overhead electrical lines exceeding AC 1 kV General requirements. Common specifications |
| I.S. EN 2755:2009 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER - ELEVATED LOAD AT AMBIENT TEMPERATURE - TECHNICAL SPECIFICATION |
| I.S. EN 13565-1:2004 | FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| ISEA 125 : 2014 | CONFORMITY ASSESSMENT OF SAFETY AND PERSONAL PROTECTIVE EQUIPMENT |
| I.S. CR 14269:2001 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - GUIDELINES FOR THE PURCHASE |
| I.S. CLC/TS 61112:2006 | BLANKETS OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES |
| I.S. EN 4132:2009 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| ISO 6966-2:2014 | Aircraft ground equipment — Basic requirements — Part 2: Safety requirements |
| UNE-EN ISO 14253-2:2012 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011) |
| ISO/IEC 26513:2009 | Systems and software engineering - Requirements for testers and reviewers of user documentation |
| ISO/IEC Guide 68:2002 | Arrangements for the recognition and acceptance of conformity assessment results |
| AAMI IEC 62366-1 : 2015 | MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
| ISO 9003:1994 | Quality systems Model for quality assurance in final inspection and test |
| ISO 20683-2:2016 | Aircraft ground equipment Design, testing and maintenance requirements for nose gear towbarless towing vehicle (TLTV) Part 2: Regional aircraft |
| ISO/PAS 17005:2008 | Conformity assessment Use of management systems Principles and requirements |
| BS EN 62246-2:2008 | Reed contact units Heavy-duty reed switches |
| PREN 15650 : DRAFT 2017 | VENTILATION FOR BUILDINGS - FIRE DAMPERS |
| ISO 7076-6:2016 | Fire protection — Foam fire extinguishing systems — Part 6: Vehicle mounted compressed air foam systems |
| UNI CEI ISO/IEC 17007 : 2010 | CONFORMITY ASSESSMENT - GUIDANCE FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT |
| UNI EN ISO 13174 : 2013 | CATHODIC PROTECTION OF HARBOUR INSTALLATIONS |
| SAE AS 6081 : 2012 | FRAUDULENT/COUNTERFEIT ELECTRONIC PARTS: AVOIDANCE, DETECTION, MITIGATION, AND DISPOSITION - DISTRIBUTORS |
| I.S. EN 16590-4:2014 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 4: PRODUCTION, OPERATION, MODIFICATION AND SUPPORTING PROCESSES (ISO 25119-4:2010 MODIFIED) |
| ISO/IEC TS 17022:2012 | Conformity assessment Requirements and recommendations for content of a third-party audit report on management systems |
| UNI EN 74-2 : 2009 | COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES |
| UNI EN 16034 : 2014 | PEDESTRIAN DOORSETS, INDUSTRIAL, COMMERCIAL, GARAGE DOORS AND OPENABLE WINDOWS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS |
| ISO 16142-2:2017 | Medical devices — Recognized essential principles of safety and performance of medical devices — Part 2: General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards |
| ISO 2230:2002 | Rubber products — Guidelines for storage |
| UNI EN ISO 13408-6 : 2013 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 6: ISOLATOR SYSTEMS |
| CSA LNG 2-2017 | LIQUEFIED NATURAL GAS VEHICLE FUEL CONTAINERS |
| UNI EN 15267-1 : 2009 | AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 1: GENERAL PRINCIPLES |
| I.S. EN 124-5:2015 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 5: GULLY TOPS AND MANHOLE TOPS MADE OF COMPOSITE MATERIALS |
| NF ISO 6966-2 : 2006 | AIRCRAFT GROUND EQUIPMENT - BASIC REQUIREMENTS - PART 2: SAFETY REQUIREMENTS |
| ISO 21927-1:2008 | Smoke and heat control systems — Part 1: Specification for smoke barriers |
| DIN EN 997:2015-09 | WC PANS AND WC SUITES WITH INTEGRAL TRAP |
| EN 15102:2007+A1:2011 | Decorative wall coverings - Roll and panel form |
| BS EN 62402:2007 | Obsolescence management. Application guide |
| ISO/TS 19158:2012 | Geographic information — Quality assurance of data supply |
| CSA Z17665-1 : 2009 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ISO/TR 14062:2002 | Environmental management Integrating environmental aspects into product design and development |
| I.S. EN 14527:2016 | SHOWER TRAYS FOR DOMESTIC PURPOSES |
| UNE-EN 16001:2010 | Energy management systems - Requirements with guidance for use |
| ISO 13448-2:2004 | Acceptance sampling procedures based on the allocation of priorities principle (APP) Part 2: Coordinated single sampling plans for acceptance sampling by attributes |
| ISO/TR 10013:2001 | Guidelines for quality management system documentation |
| DIN EN 12845:2016-04 | FIXED FIREFIGHTING SYSTEMS - AUTOMATIC SPRINKLER SYSTEMS - DESIGN, INSTALLATION AND MAINTENANCE |
| EI 1550 : 2014 | HANDBOOK ON EQUIPMENT USED FOR THE MAINTENANCE AND DELIVERY OF CLEAN AVIATION FUEL |
| UNE-EN 15512:2010 | Steel static storage systems - Adjustable pallet racking systems - Principles for structural design |
| ISO/IEC/IEEE 15939:2017 | Systems and software engineering — Measurement process |
| UNI/TR 11510 : 2013 | Nuclear plants - Particular requirements for the application of UNI EN ISO 9001: 2008 in the nuclear field |
| PD ISO/TS 9002:2016 | Quality management systems. Guidelines for the application of ISO 9001:2015 |
| I.S. EN ISO 13628-15:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS (ISO 13628-15:2011) |
| S.R. CEN/TS 1329-2:2012 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| IEC 60494-1:2013 | Railway applications - Rolling stock - Pantographs - Characteristics and tests - Part 1: Pantographs for main line vehicles |
| DEFSTAN 00-55(PT1)/2(1997) : 1997 | REQUIREMENTS FOR SAFETY RELATED SOFTWARE IN DEFENCE EQUIPMENT - PART 1: REQUIREMENTS |
| DIN EN 14428:2015-09 | SHOWER ENCLOSURES - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 62155:2003 | HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V |
| ISO 37101:2016 | Sustainable development in communities — Management system for sustainable development — Requirements with guidance for use |
| UNE-EN 74-2:2010 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures |
| UNE-EN 16397-2:2015 | Flexible couplings - Part 2: Characteristics and testing for metal banded flexible couplings, adaptors and bushes |
| UNI EN ISO 19011 : 2012 | GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS |
| CEI UNI EN ISO/IEC 17025 : 2008 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| EN 1400:2013+A1:2014 | Child use and care articles - Soothers for babies and young children - Safety requirements and test methods |
| 17/30356734 DC : 0 | BS EN 14236 - ULTRASONIC DOMESTIC GAS METERS |
| CEI EN 60794-4-20 : 2013 | OPTICAL FIBRE CABLES - PART 4-20: AERIAL OPTICAL CABLES ALONG ELECTRICAL POWER LINES - FAMILY SPECIFICATION FOR ADSS (ALL DIELECTRIC SELF SUPPORTED) OPTICAL CABLES |
| BS EN 16910-1:2018 | Railway applications. Rolling stock. Requirements for non-destructive testing on running gear in railway maintenance Wheelsets |
| I.S. CLC TS 50502:2007 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS |
| DD CEN/TS 14632:2006 | Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP). Guidance for the assessment of conformity |
| I.S. CEN/TR 14585-2:2006 | CORRUGATED METAL HOSE ASSEMBLIES FOR PRESSURE APPLICATIONS - PART 2: GUIDANCE ON THE USE OF CONFORMITY ASSESSMENT PROCEDURES |
| I.S. EN 16590-2:2014 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE (ISO 25119-2:2010 MODIFIED) |
| 14/30274689 DC : 0 | BS EN 54-20 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 20: ASPIRATING SMOKE DETECTORS |
| UNI EN 15234-1 : 2011 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 1: GENERAL REQUIREMENTS |
| UNI CEN ISO/TS 15877-7 : 2009 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| 14/30295898 DC : 0 | BS EN 14904 - SURFACES FOR SPORTS AREAS - INDOOR SURFACES FOR MULTI-SPORTS USE - SPECIFICATION |
| UNE-EN 15824:2017 | Specifications for external renders and internal plasters based on organic binders |
| NASA-STD-8739.12:2018 | METROLOGY & CALIBRATION |
| AAMI ISO 11137-1:2006 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ASTM F 1470 : 2018 : REDLINE | Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection |
| UNE-EN ISO 11607-1:2017 | Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems (ISO 11607-1:2006, including Amd 1:2014) |
| 17/30357407 DC : 0 | BS EN 997 - WC PANS AND WC SUITES WITH INTEGRAL TRAP |
| 17/30360105 DC : 0 | BS EN 1748-1-2 - GLASS IN BUILDING - SPECIAL BASIC PRODUCTS - BOROSILICATE FLOAT GLASS - PART 1-2: PRODUCT STANDARD |
| I.S. EN 62246-2:2008 | REED CONTACT UNITS - PART 2: HEAVY-DUTY REED SWITCHES |
| I.S. EN 15382:2013 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE |
| UNI CEN ISO/TS 22391-7 : 2012 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| EN 13491:2018 | Geosynthetic barriers - Characteristics required for use in the construction of tunnels and associated underground structures |
| ASTM F 2181 : 2014 : REDLINE | Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants |
| UNI EN 1279-5 : 2010 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY |
| ASTM F 3213 : 2017 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion |
| UNE-CEN/TR 14383-2:2011 IN | Prevention of crime - Urban planning and building design - Part 2: Urban planning |
| UNI EN 9120 : 2010 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENCE DISTRIBUTORS |
| SAE AIR 6170 : 2017 | ICE MELTING TEST METHOD FOR RUNWAYS AND TAXIWAYS DEICING/ANTI-ICING CHEMICALS |
| BS EN 12566-6:2013 | Small wastewater treatment systems for up to 50 PT Prefabricated treatment units for septic tank effluent |
| UNI EN 1090-1 : 2012 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS |
| CCS GUIDE FOR SAFETY AND RELIABILITY : 2017 | GUIDE FOR SAFETY AND RELIABILITY ASSESSMENT FOR SHIPBOARD SOFTWARE |
| UNE-ISO 39001:2013 | Road traffic safety (RTS) management systems - Requirements with guidance for use |
| ASTM F 2070 : 2000 : R2006 | Standard Specification for Transducers, Pressure and Differential, Pressure, Electrical and Fiber-Optic |
| NF EN 3389 : 2009 | AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY) - CLASSIFICATION: 1210 MPA/730 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
| DEFSTAN 05-122/2(2000) : 2000 | PROCEDURAL REQUIREMENTS FOR MILITARY AIRCRAFT REGISTRATION OF PARTICULAR CIVIL-OWNED MILITARY TYPE AIRCRAFT (COMA) |
| API 15S : 2016 | SPOOLABLE REINFORCED PLASTIC LINE PIPE |
| ASTM F 1718 : 2001 : R2019 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
| CEI EN 50215 : 2011 | RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE |
| CSA ISO 10012-1 : 0 | QUALITY ASSURANCE REQUIREMENTS FOR MEASURING EQUIPMENT - PART 1: METROLOGICAL CONFIRMATION SYSTEM FOR MEASURING EQUIPMENT |
| CSA Z364.1.1-Z364.1.2 : 0 | HAEMODIALYZERS, HAEMOFILTERS, AND HAEMOCONCENTRATORS/EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYZERS, HAEMOFILTERS, AND HAEMOCONCENTRATORS |
| UNI EN 15682-2 : 2013 | GLASS IN BUILDING - HEAT SOAKED THERMALLY TOUGHENED ALKALINE EARTH SILICATE SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD |
| UNI EN ISO 14051 : 2011 | ENVIRONMENTAL MANAGEMENT - MATERIAL FLOW COST ACCOUNTING - GENERAL FRAMEWORK |
| ASTM F 2071 : 2000 : R2017 | Standard Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic |
| ASTM D 5330/D5330M : 2006 | Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced |
| UNI EN 1457-1 : 2012 | CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 1: FLUE LINERS OPERATING UNDER DRY CONDITIONS - REQUIREMENTS AND TEST METHODS |
| NF EN 50238 : 2003 | RAILWAY APPLICATIONS - COMPATIBILITY BETWEEN ROLLING STOCK AND TRAIN DETECTION SYSTEMS |
| UNI CEN/TR 15545 : 2007 | GUIDE TO THE USE OF EN 545 |
| ASTM F 2444 : 2004 | Standard Practice for Damage Prevention of Bearings, and Bearing Components Through Proper Handling Techniques |
| I.S. EN 1591-4:2013 | FLANGES AND THEIR JOINTS - PART 4: QUALIFICATION OF PERSONNEL COMPETENCY IN THE ASSEMBLY OF THE BOLTED CONNECTIONS OF CRITICAL SERVICE PRESSURIZED SYSTEMS |
| I.S. EN 14963:2006 | ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH OR WITHOUT UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS |
| I.S. EN 15381:2008 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN PAVEMENTS AND ASPHALT OVERLAYS |
| DIN EN 1096-4:2015-06 (Draft) | GLASS IN BUILDING - COATED GLASS - PART 4: EVALUATION OF CONFORMITY/PRODUCT STANDARD |
| ASTM F 799 : 2011 : REDLINE | SPECIFICATION FOR COBALT-28CHROMIUM-6MOLYBDENUM ALLOY FORGINGS FOR SURGICAL IMPLANTS (UNS R31537, R31538, R31539) |
| ASTM C 1533 : 2015 : REDLINE | Standard Guide for General Design Considerations for Hot Cell Equipment |
| I.S. EN ISO 15423:2010 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE SCANNER AND DECODER PERFORMANCE TESTING |
| I.S. CWA 14172-7:2004 | EESSI CONFORMITY ASSESSMENT GUIDANCE - PART 7: CRYPTOGRAPHIC MODULES USED BY CERTIFICATION SERVICE PROVIDERS FOR SIGNING OPERATIONS AND KEY GENERATION SERVICES |
| I.S. ISO 9004-3:1994 | QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS - PART 3: GUIDELINES FOR PROCESSED MATERIALS |
| API Q1 : 2013 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR MANUFACTURING ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRY |
| I.S. CEN TS 15176:2006 | EVALUATION OF CONFORMITY FOR FIXED FIREFIGHTING SYSTEMS STANDARDS |
| CSA ISO TR 31004 : 2014 | RISK MANAGEMENT - GUIDANCE FOR THE IMPLEMENTATION OF ISO 31000 |
| ISO/IEC TR 90005:2008 | Systems engineering Guidelines for the application of ISO 9001 to system life cycle processes |
| EN 60079-19:2011/A1:2015 | EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION (IEC 60079-19:2010) |
| EN 15048-1:2016 | Non-preloaded structural bolting assemblies - Part 1: General requirements |
| ISO 9940:2015 | Aerospace series Fluid, hydraulic, phosphate ester-base, fire resistant Technical specification |
| ISO/IEC 90003:2014 | Software engineering Guidelines for the application of ISO 9001:2008 to computer software |
| IEC 60748-23-1:2002 | Semiconductor devices - Integrated circuits - Part 23-1: Hybrid integrated circuits and film structures - Manufacturing line certification - Generic specification |
| EN ISO/TS 15874-7 : 2003 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| ASTM F 1713 : 2008 : R2013 | Standard Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications (UNS R58130) |
| ASTM F 2044 : 2009 : R2013 | Standard Specification for Liquid Level Indicating Equipment, Electrical |
| EN ISO 3834-1:2005 | Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2005) |
| ISO/IEC 25000:2014 | Systems and software engineering Systems and software Quality Requirements and Evaluation (SQuaRE) Guide to SQuaRE |
| ASTM F 1718 : 2001 : R2013 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
| IECQ 03-4:2014 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PRODECURE - PART 4: IECQ AVIONICS SCHEME - AVIONICS PARTS AND ASSEMBLY MANAGEMENT |
| ASTM F 136 : 2013 : REDLINE | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401) |
| ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories |
| IEC 62499:2008 | Railway applications - Current collection systems - Pantographs, testing methods for carbon contact strips |
| ISO 14006:2011 | Environmental management systems Guidelines for incorporating ecodesign |
| NFPA 1801 : 2018 | THERMAL IMAGERS FOR THE FIRE SERVICE |
| NFPA 1953 : 2016 | PROTECTIVE ENSEMBLES FOR CONTAMINATED WATER DIVING |
| NFPA 1952 : 2015 | SURFACE WATER OPERATIONS PROTECTIVE CLOTHING AND EQUIPMENT |
| I.S. EN 14915:2013 | SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| EN 12167:2016 | Copper and copper alloys - Profiles and bars for general purposes |
| EN 545:2010 | Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
| EN 1263-1:2014 | Temporary works equipment - Safety nets - Part 1: Safety requirements, test methods |
| NFPA 1977 : 2016 | PROTECTIVE CLOTHING AND EQUIPMENT FOR WILDLAND FIRE FIGHTING |
| EN 12165:2016 | Copper and copper alloys - Wrought and unwrought forging stock |
| I.S. EN 14382:2005 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| I.S. EN 14419:2009 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - SURVEILLANCE SYSTEMS |
| I.S. EN 488:2015 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - STEEL VALVE ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| NFPA 1986 : 2017 | RESPIRATORY PROTECTION EQUIPMENT FOR TACTICAL AND TECHNICAL OPERATIONS |
| EN 14915:2013+A1:2017 | Solid wood panelling and cladding - Characteristics, requirements and marking |
| I.S. EN 12566-3:2016 | SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 3: PACKAGED AND/OR SITE ASSEMBLED DOMESTIC WASTEWATER TREATMENT PLANTS |
| DIN EN 12368:2015-09 | Traffic control equipment - Signal heads |
| I.S. EN 508-2:2008 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELFSUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM |
| I.S. EN 61191-2:2017 | PRINTED BOARD ASSEMBLIES - PART 2: SECTIONAL SPECIFICATION - REQUIREMENTS FOR SURFACE MOUNT SOLDERED ASSEMBLIES |
| NFPA 11 : 2016 | LOW-, MEDIUM-, AND HIGH-EXPANSION FOAM |
| I.S. EN 253:2009 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PIPE ASSEMBLY OF STEEL SERVICE PIPE, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| I.S. EN 448:2015 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| NFPA 1982 : 2018 | Standard on Personal Alert Safety Systems (PASS) |
| NFPA 1964 : 2018 | SPRAY NOZZLES |
| DIN EN 13341:2011-04 | Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements and test methods (includes Amendment A1:2011) |
| DIN EN ISO 11140-1:2015-03 | Sterilization of health care products - Chemical indicators - Part 1: General requirements (ISO 11140-1:2014) |
| DIN EN 13481-7:2012-08 | Railway applications - Track - Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossings and check rails |
| EN ISO 14922-2:1999 | Thermal spraying - Quality requirements of thermally sprayed structures - Part 2: Comprehensive quality requirements (ISO 14922-2:1999) |
| DIN EN 13599:2014-12 | COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES |
| DIN EN 13022-2:2014-08 | GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - PART 2: ASSEMBLY RULES |
| DIN EN 13261:2011-01 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
| DIN EN 13422:2009-08 | VERTICAL ROAD SIGNS - PORTABLE DEFORMABLE WARNING DEVICES AND DELINEATORS - PORTABLE ROAD TRAFFIC SIGNS - CONES AND CYLINDERS |
| DIN EN 1423:2013-03 | ROAD MARKING MATERIALS - DROP ON MATERIALS - GLASS BEADS, ANTISKID AGGREGATES AND MIXTURES OF THE TWO |
| DIN EN 12158-1:2011-06 | Builders' hoists for goods - Part 1: Hoists with accessible platforms (includes Amendment A1:2010) |
| DIN EN 13262:2011-06 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
| DIN EN 1947:2014-09 | FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES |
| DIN EN 14532-1:2005-02 | WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 1: PRIMARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS |
| DIN EN 1422:2014-08 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| DIN EN 12952-6:2011-10 | Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler |
| DIN EN 12899-2:2008-02 | Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB) |
| DIN EN 1982:2016-01 (Draft) | COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS |
| DIN EN 13481-2:2012-08 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 2: FASTENING SYSTEMS FOR CONCRETE SLEEPERS |
| DIN EN 1317-5:2012-06 | ROAD RESTRAINT SYSTEMS - PART 5: PRODUCT REQUIREMENTS AND EVALUATION OF CONFORMITY FOR VEHICLE RESTRAINT SYSTEMS |
| DIN EN ISO 22000:2005-11 | FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS FOR ANY ORGANIZATION IN THE FOOD CHAIN |
| EN ISO 14922-4:1999 | Thermal spraying - Quality requirements of thermally sprayed structures - Part 4: Elementary quality requirements (ISO 14922-4:1999) |
| DIN EN 1253-3:2016-09 | GULLIES FOR BUILDINGS - PART 3: EVALUATION OF CONFORMITY |
| DIN EN 13602:2013-09 | Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors |
| DIN EN 1254-1:1998-03 | Copper and copper alloy plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
| DIN EN ISO 11140-4:2007-07 | Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration (ISO 11140-4:2007) |
| DIN EN 13859-1:2014-07 | FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 1: UNDERLAYS FOR DISCONTINUOUS ROOFING |
| DIN EN 13225:2013-06 | PRECAST CONCRETE PRODUCTS - LINEAR STRUCTURAL ELEMENTS |
| DIN EN ISO 11140-3:2009-09 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 3: CLASS 2 INDICATOR SYSTEMS FOR USE IN THE BOWIE AND DICK-TYPE STEAM PENETRATION TEST |
| DIN EN 13604:2013-09 | Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper |
| DIN EN 12385-1:2009-01 | STEEL WIRE ROPES - SAFETY - PART 1: GENERAL REQUIREMENTS |
| BS EN 14525:2004 | Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, grey iron, steel, PVC-U, PE, fibre-cement |
| 15/30292344 DC : 0 | BS ISO 19281 - AIR CARGO - FIRE RESISTANT CONTAINERS - DESIGN, PERFORMANCE AND TESTING REQUIREMENTS |
| IEC 61189-5-2:2015 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-2: General test methods for materials and assemblies - Soldering flux for printed board assemblies |
| BS EN 13063-2:2005 | Chimneys. System chimneys with clay/ceramic flue liners Requirements and test methods under wet conditions |
| BS EN 764-5:2014 | Pressure equipment Inspection documentation of metallic materials and compliance with the material specification |
| BS EN 13600:2013 | Copper and copper alloys. Seamless copper tubes for electrical purposes |
| BS EN 15347:2007 | Plastics. Recycled Plastics. Characterization of plastics waste |
| BS EN 14200:2004 | Railway applications. Suspension components. Parabolic springs, steel |
| BS EN 14287:2004 | Aluminium and aluminium alloys. Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components |
| BS EN 1826:1997 | Biotechnology. Large-scale process and production. Control procedures for raw materials |
| BS EN 12094-2:2003 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for non-electrical automatic control and delay devices |
| BS EN 14408-1:2004 | Plastics piping systems for renovation of underground gas supply networks General |
| BS EN 13980:2002 | Potentially explosive atmospheres. Application of quality systems |
| BS EN 13290-1:1999 | Space project management. General requirements Policy and principles |
| BS EN 10288:2002 | Steel tubes and fittings for onshore and offshore pipelines. External two layer extruded polyethylene based coatings |
| BS EN 12094-7:2001 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for nozzles for CO2 systems |
| ISO 14922-1:1999 | Thermal spraying Quality requirements of thermally sprayed structures Part 1: Guidance for selection and use |
| DIN EN 15014:2014-06 (Draft) | PLASTICS PIPING SYSTEMS - BURIED AND ABOVE GROUND SYSTEMS FOR WATER AND OTHER FLUIDS UNDER PRESSURE - PERFORMANCE CHARACTERISTICS FOR PIPES, FITTINGS AND THEIR JOINTS |
| BS EN 61191-3:2017 | Printed board assemblies Sectional specification. Requirements for through-hole mount soldered assemblies |
| BS EN 13063-3:2007 | Chimneys. System chimneys with clay/ceramic flue liners Requirements and test methods for air flue system chimneys |
| BS EN 1304:2013 | Clay roofing tiles and fittings. Product definitions and specifications |
| BS EN 12050-3:2015 | Wastewater lifting plants for buildings and sites Lifting plants for limited applications |
| UNE-ISO 37500:2016 | Guidance on outsourcing |
| BS EN ISO 10993-1 : 2009-10 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS (ISO 10993-1:2009) |
| BS EN 13407 : 2015 | WALL-HUNG URINALS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| BS EN 4166:2004 | Aerospace series. Clips, spring tension, three parts. PTFE bushes |
| BS EN 13160-2:2003 | Leak detection systems Pressure and vacuum systems |
| BS EN 517:2006 | Prefabricated accessories for roofing. Roof safety hooks |
| BS ISO 24511:2007 | Activities relating to drinking water and wastewater services. Guidelines for the management of wastewater utilities and for the assessment of wastewater services |
| 13/30278104 DC : 0 | BS ISO 10327 - AIR CARGO - MAIN DECK CONTAINERS - DESIGN AND TESTING |
| BS EN 15266:2007 | Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar |
| BS EN 12101-3:2015 | Smoke and heat control systems Specification for powered smoke and heat control ventilators (Fans) |
| BS EN 12337-2:2004 | Glass in building. Chemically strengthed soda lime silicate glass Evaluation of conformity/Product standard |
| BS EN 179:2008 | Building hardware. Emergency exit devices operated by a lever handle or push pad, for use on escape routes. Requirements and test methods |
| BS EN 556-1:2001 | Sterilization of medical devices. Requirements for medical devices to be designated \'STERILE\' Part 1. Requirements for terminally sterilized medical devices |
| UNE-EN 13022-2:2015 | Glass in building - Structural sealant glazing - Part 2: Assembly rules |
| BS EN 12101-2:2017 | Smoke and heat control systems Natural smoke and heat exhaust ventilators |
| BS EN 14190:2014 | Gypsum board products from reprocessing. Definitions, requirements and test methods |
| BS EN ISO 14554-2:2013 | Quality requirements for welding. Resistance welding of metallic materials Elementary quality requirements |
| BS EN 438-7:2005 | High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Compact laminate and HPL composite panels for internal and external wall and ceiling finishes |
| BS EN 12209:2016 | Building hardware. Mechanically operated locks and locking plates. Requirements and test methods |
| BS EN ISO/IEC 15416:2002 | Information technology. Automatic identification and data capture techniques. Bar code print quality test specification. Linear symbols |
| BS EN 450-2:2005 | Fly ash for concrete Conformity evaluation |
| BS EN ISO 3452-2:2013 | Non-destructive testing. Penetrant testing Testing of penetrant materials |
| BS EN 13981-4:2006 | Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery Forgings |
| BS EN 1492-4 : 2004 | TEXTILE SLINGS - SAFETY - PART 4: LIFTING SLINGS FOR GENERAL SERVICE MADE FROM NATURAL AND MAN-MADE FIBRE ROPES |
| BS EN ISO 10380:2012 | Pipework. Corrugated metal hoses and hose assemblies |
| BS EN 61189-5-1:2016 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies General test methods for materials and assemblies. Guidance for printed board assemblies |
| BS EN 14286:2008 | Aluminium and aluminium alloys. Weldable rolled products for tanks for the storage and transportation of dangerous goods |
| BS EN 3052:2009 | Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Classification: 1100 MPa (at ambient temperature) / 425 °C |
| BS EN 12899-4:2007 | Fixed, vertical road traffic signs Factory production control |
| BS EN 1344:2013 | Clay pavers. Requirements and test methods |
| ISO/IEC Guide 62:1996 | General requirements for bodies operating assessment and certification/registration of quality systems |
| UNE-EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
| BS EN 1856-1:2009 | Chimneys. Requirements for metal chimneys System chimney products |
| BS EN 14901:2006 | Ductile iron pipes, fittings and accessories. Epoxy coating (heavy duty) of ductile iron fittings and accessories. Requirements and test methods |
| BS EN 1254-2:1998 | Copper and copper alloys. Plumbing fittings Fittings with compression ends for use with copper tubes |
| BS EN 14889-2:2006 | Fibres for concrete Polymer fibres. Definitions, specifications and conformity |
| 12/30263299 DC : 0 | BS EN 4826 - AEROSPACE SERIES - ZINC-NICKEL (12/16% NI) PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS AND ALUMINIUM ALLOYS FOR PARTS AND FASTENERS |
| BS EN 13877-3:2004 | Concrete pavements Specifications for dowels to be used in concrete pavements |
| BS EN 877 : 1999 | CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| ISO 13174:2012 | Cathodic protection of harbour installations |
| I.S. EN ISO 13485:2016 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR REGULATORY PURPOSES (ISO 13485:2016) |
| UNE-EN 14496:2017 | Gypsum based adhesives for thermal/acoustic insulation composite panels and gypsum boards - Definitions, requirements and test methods |
| UNE-ISO 55000:2015 | Asset management. Overview, principles and terminology. |
| BS EN 14267:2004 | Irrigation techniques. Irrigation hydrants |
| UNE-EN ISO 11608-1:2015 | Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2014) |
| EN 197-2:2014 | Cement - Part 2: Conformity evaluation |
| BS EN 12668-1:2010 | Non-destructive testing. Characterization and verification of ultrasonic examination equipment Instruments |
| BS EN 506:2008 | Roofing products of metal sheet. Specification for self-supporting products of copper or zinc sheet |
| UNE-EN ISO 10380:2013 | Pipework - Corrugated metal hoses and hose assemblies (ISO 10380:2012) |
| ISO 17663:2009 | Welding — Quality requirements for heat treatment in connection with welding and allied processes |
| BS EN 13348:2016 | Copper and copper alloys. Seamless, round copper tubes for medical gases or vacuum |
| IEC 62326-1:2002 | Printed boards - Part 1: Generic specification |
| BS EN 14350-1:2004 | Child use and care articles. Drinking equipment General and mechanical requirements and tests |
| BS EN ISO 11140-1:2014 | Sterilization of health care products. Chemical indicators General requirements |
| BS EN 45510-4-1:1999 | Guide for the procurement of power station equipment. Boiler auxiliaries Equipment for reduction of dust emissions - Equipment for the reduction of dust emissions |
| IEC 61400-2:2013 | Wind turbines - Part 2: Small wind turbines |
| BS EN ISO 16426:2002 | Fasteners. Quality assurance system |
| BS EN 12809 : 2001 | RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS |
| BS EN ISO/IEC 15423:2010 | Information technology. Automatic identification and data capture techniques. Bar code scanner and decoder performance testing |
| BS EN 13913:2003 | Railway applications. Rubber suspension components. Elastomer-based mechanical parts |
| ISO 17989-1:2015 | Tractors and machinery for agriculture and forestry Sustainability Part 1: Principles |
| UNE-EN 15313:2017 | Railway applications - In-service wheelset operation requirements - In-service and off-vehicle wheelset maintenance |
| BS EN 3444:2006 | Aerospace series. Bolt, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated. Classification: 1250 MPa (at ambient temperature) / 650°C |
| BS EN 866-1:1997 | Biological systems for testing sterilizers and sterilization processes General requirements |
| ISO 11135-1:2007 | Sterilization of health care products Ethylene oxide Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices |
| BS EN 14411:2012 | Ceramic tiles. Definitions, classification, characteristics, evaluation of conformity and marking |
| BS EN 13802:2013 | Railway applications. Suspension components. Hydraulic dampers |
| BS EN ISO 14031:2013 | Environmental management. Environmental performance evaluation. Guidelines |
| I.S. EN ISO 16106:2006 | PACKAGING - TRANSPORT PACKAGES FOR DANGEROUS GOODS -DANGEROUS GOODS PACKAGINGS, INTERMEDIATE BULK CONTAINERS (IBCS) AND LARGE PACKAGINGS - GUIDELINES FOR THE APPLICATION OF ISO 9001 |
| UNE-EN 331:2016 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
| BS EN 14733 : 2005 | BITUMEN AND BITUMINOUS BINDERS - BITUMINOUS EMULSIONS, FLUXED AND CUT-BACK BITUMEN FACTORY PRODUCTION CONTROL |
| BS EN 12899-3:2007 | Fixed, vertical road traffic signs Delineator posts and retroreflectors |
| BS EN 13658-2:2005 | Metal lath and beads. Definitions, requirements and test methods External rendering |
| UNE-EN 764-5:2015 | Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification |
| BS EN 13481-3:2012 | Railway applications. Track. Performance requirements for fastening systems Fastening systems for wood sleepers |
| IEC 61191-4:2017 | Printed board assemblies - Part 4: Sectional specification - Requirements for terminal soldered assemblies |
| BS EN 13888:2009 | Grout for tiles. Requirements, evaluation of conformity, classification and designation |
| UNE-EN 13230-4:2016 | Railway applications - Track - Concrete sleepers and bearers - Part 4: Prestressed bearers for switches and crossings |
| BS EN 14382 : 2005 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| BS EN 45510-5-1:1998 | Guide for the procurement of power station equipment Steam turbines |
| BS EN 50155:2017 | Railway applications. Rolling stock. Electronic equipment |
| BS EN 61191-1:2013 | Printed board assemblies Generic specification. Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies |
| BS EN ISO 19902 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES |
| BS EN 1790:2013 | Road marking materials. Preformed road markings |
| UNE-EN 14680:2016 | Adhesives for non-pressure thermoplastics piping systems - Specifications |
| BS EN 13230-2:2016 | Railway applications. Track. Concrete sleepers and bearers Prestressed monoblock sleepers |
| BS EN ISO 14534:2015 | Ophthalmic optics. Contact lenses and contact lens care products. Fundamental requirements |
| BS EN 12050-2:2015 | Wastewater lifting plants for buildings and sites Lifting plants for faecal-free wastewater |
| UNE-EN ISO 14161:2010 | Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results (ISO 14161:2009) |
| BS EN ISO 22442-2:2015 | Medical devices utilizing animal tissues and their derivatives Controls on sourcing, collection and handling |
| BS EN 14628:2005 | Ductile iron pipes, fittings and accessories. External polythene coating for pipes. Requirements and test methods |
| BS EN 998-1:2016 | Specification for mortar for masonry Rendering and plastering mortar |
| BS EN 14508:2016 | Postal services. Quality of service. Measurement of the transit time of end-to-end services for single piece non-priority mail and second class mail |
| BS EN 13967 : 2012 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF SHEETS INCLUDING PLASTIC AND RUBBER BASEMENT TANKING SHEET - DEFINITIONS AND CHARACTERISTICS |
| ISO 14922-4:1999 | Thermal spraying Quality requirements of thermally sprayed structures Part 4: Elementary quality requirements |
| BS EN 520 : 2004 | GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| BS EN 13261 : 2009 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
| BS EN 12094-8:2006 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for connectors |
| BS EN 2754:2006 | Aerospace series. Nuts, anchor, self locking, two lug, floating with counterbore. Classification: 1100 MPa/235°C |
| BS EN 10340:2007 | Steel castings for structural uses |
| BS EN 14540:2014 | Fire-fighting hoses. Non-percolating layflat hoses for fixed systems |
| BS EN ISO 14111:1999 | Natural gas. Guidelines to traceability in analysis |
| BS EN 13160-4:2003 | Leak detection systems Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces |
| UNE-EN 14814:2016 | Adhesives for thermoplastic piping systems for fluids under pressure - Specifications |
| BS EN ISO 14557 : 2002 | FIRE-FIGHTING HOSES - RUBBER AND PLASTICS SUCTION HOSES AND HOSE ASSEMBLIES |
| BS EN 14616:2004 | Thermal spraying. Recommendations for thermal spraying |
| BS EN 1423:2012 | Road marking materials. Drop on materials. Glass beads, antiskid aggregates and mixtures of the two |
| BS EN 13597:2003 | Railway applications. Rubber suspension components. Rubber diaphragms for pneumatic suspension springs |
| BS EN 14989-1:2007 | Chimneys. Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications Vertical air/flue terminals for C6-type appliances |
| UNE-EN ISO 28765:2016 | Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges (ISO 28765:2016) |
| ISO 14554-1:2013 | Quality requirements for welding — Resistance welding of metallic materials — Part 1: Comprehensive quality requirements |
| BS EN 14964:2006 | Rigid underlays for discontinuous roofing. Definitions and characteristics |
| BS EN 12094-13:2001 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for check valves and non-return valves |
| BS EN ISO 14161:2009 | Sterilization of health care products. Biological indicators. Guidance for the selection, use and interpretation of results |
| BS EN 13616:2004 | Overfill prevention devices for static tanks for liquid petroleum fuels |
| BS EN 14566 : 2008 | MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| BS EN 12420:2014 | Copper and copper alloys. Forgings |
| BS EN 1559-1:2011 | Founding. Technical conditions of delivery General |
| 16/30282633 DC : 0 | BS EN 50155 - RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK |
| 14/30244780 DC : 0 | BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION |
| BS EN 14419:2009 | District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Surveillance systems |
| ISO 13408-1:2008 | Aseptic processing of health care products — Part 1: General requirements |
| BS EN 15014:2007 | Plastics piping systems. Buried and above ground systems for water and other fluids under pressure. Performance characteristics for pipes, fittings and their joints |
| BS EN 13253:2016 | Geotextiles and geotextile-related products. Characteristics required for use in erosion control works (coastal protection, bank revetments) |
| BS EN 12591:2009 | Bitumen and bituminous binders. Specifications for paving grade bitumens |
| UNE-EN 13257:2017 | Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals |
| BS EN ISO 11442:2006 | Technical product documentation. Document management |
| BS EN 13250:2016 | Geotextiles and geotextile-related products. Characteristics required for use in the construction of railways |
| ISO 10014:2006 | Quality management Guidelines for realizing financial and economic benefits |
| ISO 11140-1:2014 | Sterilization of health care products Chemical indicators Part 1: General requirements |
| BS EN 13108-21:2016 | Bituminous mixtures. Material specifications Factory Production Control |
| UNI EN 508-3 : 2008 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 3: STAINLESS STEEL |
| I.S. EN 13601:2013 | COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
| I.S. EN 13263-2:2005 | SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
| UNE-ISO 22301:2013 | Societal security. Business continuity management systems. Requirements |
| I.S. EN ISO 11608-1:2015 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 1: NEEDLE-BASED INJECTION SYSTEMS (ISO 11608-1:2014) |
| I.S. EN ISO 15189:2012 | MEDICAL LABORATORIES - REQUIREMENTS FOR QUALITY AND COMPETENCE (ISO 15189:2012, CORRECTED VERSION 2014-08-15) |
| I.S. EN 13148:2010 | COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP |
| DIN EN 12899-4:2008-02 | Fixed, vertical road traffic signs - Part 4: Factory production control |
| I.S. EN ISO 14557:2003 | FIRE-FIGHTING HOSES - RUBBER AND PLASTICS SUCTION HOSES AND HOSE ASSEMBLIES |
| I.S. EN 14424:2013 | HOSE FITTINGS WITH SCREWED FERRULES |
| I.S. EN 12583:2014 | GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS |
| DIN EN 729-1:1994-11 | QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - PART 1: GUIDELINES FOR SELECTION AND USE |
| I.S. EN 14901:2014 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING (HEAVY DUTY) OF DUCTILE IRON FITTINGS AND ACCESSORIES - REQUIREMENTS AND TEST METHODS |
| DIN EN 729-2:1994-11 | QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - PART 2: COMPREHENSIVE QUALITY REQUIREMENTS |
| DIN EN 14195:2015-03 | METAL FRAMING COMPONENTS FOR GYPSUM BOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| BS 6001-3:2005 | Sampling procedures for inspection by attributes Specification for skip-lot sampling procedures |
| EN 45510-5-2 : 1998 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-2: GAS TURBINES |
| EN 62326-1:2002 | Printed boards - Part 1: Generic specification |
| CEN/TS 15176:2005 | Evaluation of conformity for fixed firefighting systems standards |
| EN 13230-3:2016 | Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers |
| EN 13481-7:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossings and check rails |
| EN 13349:2002 | Copper and coppper alloys - Pre-insulated copper tubes with solid covering |
| I.S. EN ISO 14922-3:1999 | THERMAL SPRAYING - QUALITY REQUIREMENTS OF THERMALLY SPRAYED STRUCTURES - PART 3: STANDARD QUALITY REQUIREMENTS |
| DIN EN 13815:2006-12 | Fibrous gypsum plaster casts - Definitions, requirements and test methods |
| I.S. EN 877:2000 | CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| EN 13263-2:2005+A1:2009 | Silica fume for concrete - Part 2: Conformity evaluation |
| UNI EN 12158-1 : 2010 | BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS |
| DIN EN 14782:2006-03 | Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements |
| CEN/TR 15353:2007 | Plastics - Recycled plastics - Guidelines for the development of standards for recycled plastics |
| DIN EN 54-17:2006-03 | Fire detection and fire alarm systems - Part 17: Short-circuit isolators |
| EN 14229:2010 | Structural timber - Wood poles for overhead lines |
| EN 60896-22:2004 | Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements |
| ONORM EN ISO 11296-4 : 2011 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 4: LINING WITH CURED-IN-PLACE PIPES |
| EN 13255:2016 | Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals |
| EN 12101-3:2015 | Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans) |
| EN 13084-7:2012 | Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners |
| EN 13312-4:2001 | Biotechnology - Performance criteria for piping and instrumentation - Part 4: Tubes and pipes |
| EN 1337-8:2007 | Structural bearings - Part 8: Guide Bearings and Restraint Bearings |
| EN 50502:2015 | Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection systems |
| EN 15213-4:2013 | Intelligent transport systems - After-theft systems for the recovery of stolen vehicles - Part 4: Interface and system requirements in terms of long range communication system |
| DIN EN 818-1:2008-12 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 1: GENERAL CONDITIONS OF ACCEPTANCE |
| DIN EN ISO 11980:2013-03 | Ophthalmic optics - Contact lenses and contact lens care products - Guidance for clinical investigations (ISO 11980:2012) |
| EN 13069:2005 | Chimneys - Clay/ceramic outer walls for system chimneys - Requirements and test methods |
| EN 45510-5-4:1998 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-4: HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES |
| EN 12798:2007 | Transport Quality Management System - Road, Rail and Inland navigation transport - Quality management system requirements to supplement EN ISO 9001 for the transport of dangerous goods with regard to safety |
| EN 13230-2:2016 | Railway applications - Track - Concrete sleepers and bearers - Part 2: Prestressed monoblock sleepers |
| EN 12259-5:2002 | Fixed firefighting systems - Components for sprinkler and water spray systems - Part 5: Water flow detectors |
| EN ISO/IEC 17024:2012 | Conformity assessment - General requirements for bodies operating certification of persons (ISO/IEC 17024:2012) |
| HD 620 : 2010 | DISTRIBUTION CABLES WITH EXTRUDED INSULATION FOR RATED VOLTAGES FROM 3,6/6 (7,2) KV UP TO AND INCLUDING 20,8/36 (42) KV |
| EN 61189-5-1:2016 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-1: General test methods for materials and assemblies - Guidance for printed board assemblies |
| DIN EN ISO 9000-3:1998-08 | QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - PART 3: GUIDELINES FOR THE APPLICATION OF ISO 9001:1994 TO THE DEVELOPMENT, SUPPLY, INSTALLATION AND MAINTENANCE OF COMPUTER SOFTWARE |
| EN 10223-8:2013 | Steel wire and wire products for fencing and netting - Part 8: Welded mesh gabion products |
| EN 12952-2:2011 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
| DIN EN 14800:2007-06 | Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels |
| CEN/TS 13598-3:2012 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride)(PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Guidance for assessment of conformity |
| EN 61479:2001/A1:2002 | LIVE WORKING - FLEXIBLE CONDUCTOR COVERS (LINE HOSES) OF INSULATING MATERIAL |
| EN 12566-6:2016 | Small wastewater treatment systems for up to 50 PT - Part 6: Prefabricated treatment units for septic tank effluent |
| EN 61400-2:2014 | Wind turbines - Part 2: Small wind turbines |
| EN 50206-1:2010 | Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 1: Pantographs for main line vehicles |
| EN 124-4:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 4: Gully tops and manhole tops made of steel reinforced concrete |
| EN 12195-4:2003 | Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes |
| EN 62155:2003 | Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V |
| EN 1057:2006+A1:2010 | Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
| CEN/TS 15718:2011 | Railway applications - Wheelsets and bogies - Product requirements for cast wheels |
| EN 60694:1996/A2:2001 | COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS |
| EN 61207-6:2015 | Expression of performance of gas analyzers - Part 6:Photometric analyzers |
| EN 13265:2016 | Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects |
| EN 12899-4:2007 | Fixed, vertical road traffic signs - Part 4: Factory production control |
| EN 61207-1:2010 | Expression of performance of gas analyzers - Part 1: General |
| EN 12195-3:2001 | Load restraint assemblies on road vehicles - Safety - Part 3: Lashing chains |
| EN 12952-5:2011 | Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
| EN 50129 : 2003 COR 2010 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SAFETY RELATED ELECTRONIC SYSTEMS FOR SIGNALLING |
| EN 13311-1:2001 | Biotechnology - Performance criteria for vessels - Part 1: General performance criteria |
| EN 50575:2014/A1:2016 | POWER, CONTROL AND COMMUNICATION CABLES - CABLES FOR GENERAL APPLICATIONS IN CONSTRUCTION WORKS SUBJECT TO REACTION TO FIRE REQUIREMENTS |
| EN 62138:2009 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT FOR SAFETY - SOFTWARE ASPECTS FOR COMPUTER-BASED SYSTEMS PERFORMING CATEGORY B OR C FUNCTIONS |
| EN 10223-3:2013 | Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes |
| IEC 61133:2016 RLV | Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service |
| DIN EN 14904:2006-06 | Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification |
| DIN EN 14846:2008-11 | BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| DIN EN 13063-3:2007-10 | CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 3: REQUIREMENTS AND TEST METHODS FOR AIR FLUE SYSTEM CHIMNEYS |
| EN 12166:2016 | Copper and copper alloys - Wire for general purposes |
| EN 12080:2017 | Railway applications - Axleboxes - Rolling bearings |
| CEN ISO/TR 13881:2011 | Petroleum and natural gas industries - Classification and conformity assessment of products, processes and services (ISO/TR 13881:2000) |
| EN 124-6:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) |
| EN 62304:2006/A1:2015 | MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE-CYCLE PROCESSES (IEC 62304:2006/A1:2015) |
| DIN EN 508-2:2009-07 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM |
| DIN EN 14889-1:2006-11 | Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity |
| EN 62566:2014 | Nuclear power plants - Instrumentation and control important to safety - Development of HDL-programmed integrated circuits for systems performing category A functions |
| EN 124-2:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 2: Gully tops and manhole tops made of cast iron |
| EN 12326-1:2014 | Slate and stone for discontinuous roofing and external cladding - Part 1: Specifications for slate and carbonate slate |
| EN 13250:2016 | Geotextiles and geotextile-related products - Characteristics required for use in the construction of railways |
| CEN/TR 14383-2:2007 | Prevention of crime - Urban planning and building design - Part 2: Urban planning |
| EN 12050-1:2015 | Wastewater lifting plants for buildings and sites - Part 1: Lifting plants for wastewater containing faecal matter |
| EN 62309:2004 | Dependability of products containing reused parts - Requirements for functionality and tests |
| CEN/TS 1453-2:2017 | Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity |
| EN 12285-2:2005 | Workshop fabricated steel tanks - Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids |
| EN 61162-402:2005 | Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 402: Multiple talkers and multiple listeners - Ship systems interconnection - Documentation and test requirements |
| EN 13237:2012 | Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
| CEN/CLC ISO/IEC/TS 17021-3:2016 | Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 3: Competence requirements for auditing and certification of quality management systems (ISO/IEC/TS 17021-3:2013) |
| DIN EN 508-1:2000-12 | ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL |
| DIN EN 14891:2017-05 | LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, CLASSIFICATION AND MARKING |
| EN 10219-1:2006 | Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
| EN 12306:1997 | Biotechnology - Guidance for quality control of diagnostic kits used in agriculture, plant and animal pest and disease control and environmental contamination |
| EN 10088-4:2009 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| EN 61189-2:2006 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures |
| DIN EN 14811:2019-06 | Railway applications - Track - Special purpose rail - Grooved rails and associated construction profiles; German version EN 14811:2019 |
| EN 12566-3:2016 | Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants |
| EN 12195-2:2000 | Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres |
| EN 13411-1:2002+A1:2008 | Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings |
| CEN/TS 12666-2:2012 | Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity |
| EN 10210-1:2006 | Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
| CEN ISO/TS 13972:2015 | Health informatics - Detailed clinical models, characteristics and processes (ISO/TS 13972:2015) |
| DIN EN 14496:2017-09 | GYPSUM BASED ADHESIVES FOR THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS AND GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| CEN ISO/TR 14969:2005 | Medical devices - Quality management systems - Guidance on the application of ISO 13485:2003 (ISO/TR 14969:2004) |
| EN 12566-7:2016 | Small wastewater treatment systems for up to 50 PT - Part 7: Prefabricated tertiary treatment units |
| EN 13225:2013 | Precast concrete products - Linear structural elements |
| EN 13224:2011 | Precast concrete products - Ribbed floor elements |
| I.S. EN ISO 14922-2:1999 | THERMAL SPRAYING - QUALITY REQUIREMENTS OF THERMALLY SPRAYED STRUCTURES - PART 2: COMPREHENSIVE QUALITY REQUIREMENTS |
| EN 12081:2017 | Railway applications - Axleboxes - Lubricating greases |
| DIN EN 14616:2005-02 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING |
| EN 61069-8:2016 | Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 8: Assessment of other system properties |
| EN 12899-1:2007 | Fixed, vertical road traffic signs - Part 1: Fixed signs |
| EN 13022-2:2014 | Glass in building - Structural sealant glazing - Part 2: Assembly rules |
| EN 61478:2001/A1:2003 | LIVE WORKING - LADDERS OF INSULATING MATERIAL |
| CEN/TR 15592:2007 | Health services - Quality management systems - Guide for the use of EN ISO 9004:2000 in health services for performance improvement |
| EN 61131-6:2012 | Programmable controllers - Part 6: Functional safety |
| CEN/TS 13476-4:2013 | Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 4: Guidance for the assessment of conformity |
| EN 62402 : 2007 | OBSOLESCENCE MANAGEMENT - APPLICATION GUIDE |
| EN 61209:1999 | Maritime navigation and radiocommunication equipment and systems - Integrated bridge systems (IBS) - Operational and performance requirements, methods of testing and required test results |
| EN 61189-6:2006 | Test methods for electrical materials, interconnection structures and assemblies - Part 6: Test methods for materials used in manufacturing electronic assemblies |
| EN 13160-2:2016 | Leak detection systems - Part 2: Requirements and test/assessment methods for pressure and vacuum systems |
| EN 13481-5:2012+A1:2017 | Railway applications - Track - Performance requirements for fastening systems - Part 5: Fastening systems for slab track with rail on the surface or rail embedded in a channel |
| EN 1051-2:2007 | Glass in building - Glass blocks and glass pavers - Part 2: Evaluation of conformity/Product standard |
| EN 10025-1:2004 | Hot rolled products of structural steels - Part 1: General technical delivery conditions |
| EN 10021:2006 | General technical delivery conditions for steel products |
| EN 12094-11:2003 | Fixed firefighting systems - Components for gas extinguishing systems - Part 11: Requirements and test methods for mechanical weighing devices |
| EN 12668-1:2010 | Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments |
| EN 13172:2012 | Thermal insulation products - Evaluation of conformity |
| DIN EN ISO 16140:2003-09 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - PROTOCOL FOR THE VALIDATION OF ALTERNATIVE METHODS (ISO 16140:2003 + AMD.1:2011) |
| DIN EN 12094-9:2003-07 | FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 9: REQUIREMENTS AND TEST METHODS FOR SPECIAL FIRE DETECTORS |
| EN 12368:2015 | Traffic control equipment - Signal heads |
| EN 10311:2005 | Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids |
| EN 12966-3:2005 | Road vertical signs - Variable message traffic signs - Part 3: Factory production control |
| EN 12462:1998 | Biotechnology - Performance criteria for pumps |
| EN 10288:2002 | Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings |
| EN 12899-2:2007 | Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB) |
| EN ISO 17663:2009 | Welding - Quality requirements for heat treatment in connection with welding and allied processes (ISO 17663:2009) |
| CEN/TS 15472:2016 | Postal services - Method for measurement of parcel transit time for cross-border parcels within the European Union and EFTA using Tracking and Tracing |
| EN 62366 : 2008 AMD 1 2015 | MEDICAL DEVICES - APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES (IEC 62366:2007/A1:2014) |
| CEN/TR 16626:2014 | Vitrified clay pipe systems for drains and sewers - Guidance for voluntary third-party certification procedures |
| EN 124-3:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys |
| EN 13160-3:2016 | Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks |
| CEN/TR 1317-6:2012 | Road restraint systems - Part 6: Pedestrian restraint system - Pedestrian parapets |
| EN 12050-3:2015 | Wastewater lifting plants for buildings and sites - Part 3: Lifting plants for limited applications |
| DIN EN 14209:2017-09 | PREFORMED PLASTERBOARD CORNICES - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| EN 12273:2008 | Slurry surfacing - Requirements |
| EN 12781:2001 | Wallcoverings - Specification for cork panels |
| EN ISO 11140-1:2014 | Sterilization of health care products - Chemical indicators - Part 1: General requirements (ISO 11140-1:2014) |
| CEN/TS 1852-2:2015 | Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity |
| EN 15224:2016 | Quality management systems - EN ISO 9001:2015 for healthcare |
| EN 12004:2007+A1:2012 | Adhesives for tiles - Requirements, evaluation of conformity, classification and designation |
| CEN/TS 1566-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Guidance for assessment of conformity |
| CEN/TS 16919:2016 | Postal services - Interface and data transfer format for capturing postal automation events IDT-PAE |
| EN 15234-1:2011 | Solid biofuels - Fuel quality assurance - Part 1: General requirements |
| EN 12566-4:2016 | Small wastewater treatment systems for up to 50 PT - Part 4: Septic tanks assembled in situ from prefabricated kits |
| EN 12337-2:2004 | Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard |
| EN 10253-3:2008 | Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements |
| UNI EN 13411-7 : 2009 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET |
| UNI EN 877 : 2007 | CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| EN 13291-1:1999 | Space product assurance - General requirements - Part 1: Policy and principles |
| EN 13411-6:2004+A1:2008 | Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket |
| EN 13312-1:2001 | Biotechnology - Performance criteria for piping and instrumentation - Part 1: General performance criteria |
| EN 1013:2012+A1:2014 | Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods |
| EN 13292:1999 | Space engineering standards - Policy and principles |
| EN 45510-1 : 1997 | Guide for procurement of power station equipment - Part 1: Common clauses |
| EN 12150-2:2004 | Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard |
| CEN/TR 15983:2010 | Stationary source emissions - Guidance on the application of EN 14181:2004 |
| EN 12271:2006 | Surface dressing - Requirements |
| EN 1090-1:2009+A1:2011 | Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components |
| EN 13422:2004+A1:2009 | Vertical road signs - Portable deformable warning devices and delineators - Portable road traffic signs - Cones and cylinders |
| EN 45510-6-2 : 1998 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-2: TURBINE AUXILIARIES - FEEDWATER HEATERS |
| EN 13341:2005+A1:2011 | Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements and test methods |
| EN 124-5:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials |
| CR ISO 17663 : 2001 | WELDING - GUIDELINES FOR QUALITY REQUIREMENTS FOR HEAT TREATMENT IN CONNECTION WITH WELDING AND ALLIED PROCESSES |
| EN 12735-2:2016 | Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment |
| CEN/TS 1455-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Guidance for the assessment of conformity |
| CEN Guide 4:2008 | GUIDE FOR ADDRESSING ENVIRONMENTAL ISSUES IN PRODUCT STANDARDS |
| EN 508-3:2008 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel |
| EN 62246-2:2008 | Reed contact units - Part 2: Heavy-duty reed switches |
| EN 60966-1:1999 | Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods |
| EN 61400-3:2009 | Wind turbines - Part 3: Design requirements for offshore wind turbines |
| EN 61557-15:2014 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems |
| CEN/TS 16850:2015 | Societal and Citizen Security - Guidance for managing security in healthcare facilities |
| EN 61284:1997 | Overhead lines - Requirements and tests for fittings |
| DIN EN 13915:2017-09 | PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 16140:2011-12 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - PROTOCOL FOR THE VALIDATION OF ALTERNATIVE METHODS (ISO 16140:2003 + AMD.1:2011) |
| CEN/TR 16478:2012 | Surveillance from first commissioning on measuring devices used in natural gas supply to the installations of the activities under the Directive 2003/87/EC establishing a scheme of CO2 emissions trading |
| EN 60746-1:2003 | Expression of performance of electrochemical analyzers - Part 1: General |
| CEN/TS 15234:2006 | Solid biofuels - Fuel quality assurance |
| EN 61189-5-4:2015 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-4: General test methods for materials and assemblies - Solder alloys and fluxed and non-fluxed solid wire for printed board assemblies |
| EN 61174:2015 | Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information system (ECDIS) - Operational and performance requirements, methods of testing and required test results |
| EN 12094-12:2003 | Fixed firefighting systems - Components for gas extinguishing systems - Part 12: Requirements and test methods for pneumatic alarm devices |
| EN 12951:2004 | Prefabricated accessories for roofing - Permanently fixed roof ladders - Product specification and test methods |
| EN 13257:2016 | Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals |
| EN 13024-2:2004 | Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/Product standard |
| UNI EN 508-1 : 2014 | ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL |
| EN 13290-1:1999 | Space project management - General requirements - Part 1: Policy and principles |
| EN 1319:2009 | Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW |
| EN 12109:1999 | Vacuum drainage systems inside buildings |
| CLC/TR 50506-1:2007 | Railway applications - Communication, signalling and processing systems - Application Guide for EN 50129 - Part 1: Cross-acceptance |
| EN 50290-2-20:2016 | Communication cables - Part 2-20: Common design rules and construction - General |
| EN 13348:2016 | Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum |
| EN 13249:2016 | Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion) |
| EN 12050-2:2015 | Wastewater lifting plants for buildings and sites - Part 2: Lifting plants for faecal-free wastewater |
| EN 12385-6:2004 | Steel wire ropes - Safety - Part 6: Stranded ropes for mine shafts |
| EN 12690:1999 | Biotechnology - Performance criteria for shaft seals |
| EN 15331:2011 | Criteria for design, management and control of maintenance services for buildings |
| I.S. EN 61191-1:2013 | PRINTED BOARD ASSEMBLIES - PART 1: GENERIC SPECIFICATION - REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES USING SURFACE MOUNT AND RELATED ASSEMBLY TECHNOLOGIES (IEC 61191-1:2013 (EQV)) |
| EN 13347:2002 | Copper and copper alloys - Rod and wire for welding and braze welding |
| EN 12763:2000 | Fibre-cement pipes and fittings for discharge systems for buildings - Dimensions and technical terms of delivery |
| EN 1337-6:2004 | Structural bearings - Part 6: Rocker bearings |
| EN 61189-5-3:2015 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-3: General test methods for materials and assemblies - Soldering paste for printed board assemblies |
| EN 13479:2017 | Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials |
| EN 14250:2010 | Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners |
| EN 12094-3:2003 | Fixed firefighting systems - Components for gas extinguishing systems - Part 3: Requirements and test methods for manual triggering and stop devices |
| EN 12385-1:2002+A1:2008 | Steel wire ropes - Safety - Part 1: General requirements |
| EN 1168:2005+A3:2011 | Precast concrete products - Hollow core slabs |
| EN 12094-2:2003 | Fixed firefighting systems - Components for gas extinguishing systems - Part 2: Requirements and test methods for non-electrical automatic control and delay devices |
| EN 12451:2012 | Copper and copper alloys - Seamless, round tubes for heat exchangers |
| CEN/TS 1591-4:2007 | Flanges and their joints - Design rules for gasketed circular flange connections - Part 4: Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive |
| EN 12385-9:2002 | Steel wire ropes - Safety - Part 9: Locked coil carrying ropes for cableway installations designed to carry persons |
| EN 12953-2:2012 | Shell boilers - Part 2: Materials for pressure parts of boilers and accessories |
| EN 12101-2:2017 | Smoke and heat control systems - Part 2: Natural smoke and heat exhaust ventilators |
| EN 12566-1:2016 | Small wastewater treatment systems for up to 50 PT - Part 1: Prefabricated septic tanks |
| EN 12101-7:2011 | Smoke and heat control systems - Part 7: Smoke duct sections |
| EN 12094-8:2006 | Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors |
| EN 13108-21:2016 | Bituminous mixtures - Material specifications - Part 21: Factory Production Control |
| CR 13576 : 1999 | IMPLEMENTATION OF EN 729 ON QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS |
| EN 12050-4:2015 | Wastewater lifting plants for buildings and sites - Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter |
| EN 12186:2014 | Gas infrastructure - Gas pressure regulating stations for transmission and distribution - Functional requirements |
| UNI EN ISO 3834-1 : 2006 | QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS - PART 1: CRITERIA FOR THE SELECTION OF THE APPROPRIATE LEVEL OF QUALITY REQUIREMENTS |
| EN 12899-3:2007 | Fixed, vertical road traffic signs - Part 3: Delineator posts and retroreflectors |
| EN 1304:2013 | Clay roofing tiles and fittings - Product definitions and specifications |
| EN 12094-10:2003 | Fixed firefighting systems - Components for gas extinguishing systems - Part 10: Requirements and test methods for pressure gauges and pressure switches |
| EN 12094-6:2006 | Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices |
| EN 13254:2016 | Geotextiles and geotextile-related products - Characteristics required for the use in the construction of reservoirs and dams |
| EN 15358:2011 | Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels |
| ONORM EN 1555-1 : 2015 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL |
| DIN EN 12004-1:2017-05 | ADHESIVES FOR CERAMIC TILES - PART 1: REQUIREMENTS, ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, CLASSIFICATION AND MARKING |
| EN 13160-4:2016 | Leak detection systems - Part 4: Requirements and test/assessment methods for sensor based leak detection systems |
| CLC/TR 50506-2:2009 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - APPLICATION GUIDE FOR EN 50129 - PART 2: SAFETY ASSURANCE |
| I.S. EN ISO 14922-1:1999 | THERMAL SPRAYING - QUALITY REQUIREMENTS OF THERMALLY SPRAYED STRUCTURES - PART 1: GUIDANCE FOR SELECTION AND USE |
| DIN EN 15224:2017-05 | QUALITY MANAGEMENT SYSTEMS - EN ISO 9001:2015 FOR HEALTHCARE |
| ASME B16.25 : 2017 | BUTTWELDING ENDS |
| ASME NQA 1 : 2017 | QUALITY ASSURANCE REQUIREMENTS FOR NUCLEAR FACILITY APPLICATIONS |
| DEFSTAN 00-55(PT1)/3(2014) : 2014 | REQUIREMENTS FOR SAFETY OF PROGRAMMABLE ELEMENTS (PE) IN DEFENCE SYSTEMS - PART 1: REQUIREMENTS AND GUIDANCE |
| ASME A17.6 : 2010 | STANDARD FOR ELEVATOR SUSPENSION, COMPENSATION, AND GOVERNOR SYSTEMS |
| BS OHSAS 18001:2007 | Occupational health and safety management systems. Requirements |
| SBAC TS 157 : 6 | AEROSPACE SECTOR CERTIFICATION SCHEME (ASCS) - REQUIREMENTS AND PROCEDURES |
| IPC SPVC-LAT1 : 2010 | ANALYTICAL PROCEDURES FOR PORTABLE LEAD-FREE ALLOY TEST DATA |
| ASME B16.11 : 2016 | FORGED FITTINGS, SOCKET-WELDING AND THREADED |
| IPC J STD 005 RUSSIAN : A | REQUIREMENTS FOR SOLDERING FLUXES |
| IPC J STD 004 RUSSIAN : B | REQUIREMENTS FOR SOLDERING FLUXES |
| ASME AG-1 : 2019 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
| CEI EN 60115-1:2023 | Fixed resistors for use in electronic equipment Part 1: Generic specification |
| ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
| ASME B16.25:2022 | Buttwelding Ends |
| ASME B16.42 : 2016 | DUCTILE IRON PIPE FLANGES AND FLANGED FITTINGS - CLASSES 150 AND 300 |
| IPC 1601 GERMAN : - | PRINTED BOARD HANDLING AND STORAGE GUIDELINES |
| ACMP-2009-SRD-10 : A2017 | NATO CM TRAINING PACKAGE |
| DEFSTAN 00-56(PT1)/5(2014) : 2014 | SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 1: REQUIREMENTS AND GUIDANCE |
| ASME B16.22 : 2013 | WROUGHT COPPER AND COPPER ALLOY SOLDER-JOINT PRESSURE FITTINGS |
| VDI/VDE 3516 Blatt 5:2017-08 (Draft) | Validation in the GxP area - Types of raw data |
| IPC 9592 : B | REQUIREMENTS FOR POWER CONVERSION DEVICES FOR THE COMPUTER AND TELECOMMUNICATIONS INDUSTRIES |
| DEFSTAN 05-10(PT0)/5(2006) : 2006 | PRODUCT DEFINITION INFORMATION - PART 0: GENERAL INTRODUCTION TO PRODUCT DEFINITION INFORMATION |
| IPC 4412 : B | SPECIFICATION FOR FINISHED FABRIC WOVEN FROM 'E' GLASS FOR PRINTED BOARDS |
| DEFSTAN 00-056(PT2)/5(2017) : 2017 | SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 2: GUIDANCE ON ESTABLISHING A MEANS OF COMPLYING WITH PART 1 |
| DEFSTAN 00-56(PT2)/2(1996) : 1996 | SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 2: GUIDANCE |
| ASME AG 1 : 2012 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
| DEFSTAN 02-884/2(2015) : 2015 | SUBMARINE ENTERPRISE STANDARD QUALITY REQUIREMENTS |
| ASME B16.9 : 2012 | FACTORY-MADE WROUGHT BUTTWELDING FITTINGS |
| IPC 4412 CHINESE : B | SPECIFICATION FOR FINISHED FABRIC WOVEN FROM 'E' GLASS FOR PRINTED BOARDS |
| IPC J STD 004 CHINESE : B | REQUIREMENTS FOR SOLDERING FLUXES |
| DEFSTAN 23-6/3(2000) : 2000 | GUIDE TO THE COMMON TECHNICAL REQUIREMENTS FOR MILITARY LOGISTIC VEHICLES AND TOWED EQUIPMENT |
| ASME B16.29 : 2017 | Wrought Copper and Wrought Copper Alloy Solder-Joint Drainage Fittings--DWV |
| VDI 3475 Blatt 2:2005-12 | Emission control - Facilities for biological waste - Composting an anaerobic (co-)digestion - Plant capacities up to approx. 6000 Mg/a |
| IPC J STD 006 CHINESE : B-2 | REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDERS FOR ELECTRONIC SOLDERING APPLICATIONS |
| IPC J STD 005 : A | REQUIREMENTS FOR SOLDERING PASTES |
| IPC J STD 005 CHINESE : A | REQUIREMENTS FOR SOLDERING PASTES |
| ASME B16.48 : 2015 | LINE BLANKS |
| DEFSTAN 00-56(PT1)/6(2015) : 2015 | SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 1: REQUIREMENTS AND GUIDANCE |
| API SPEC 6D:2021+ERR 3:2023 | Specification for Valves |
| ANSI/AWWA E200:2023 | Progressive Cavity Chemical Metering Pumps |
| 18/30371677 DC : DRAFT MAY 2018 | BS EN 1401-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEMS |
| ISO/IEC 21827:2008 | Information technology Security techniques Systems Security Engineering Capability Maturity Model (SSE-CMM) |
| DIN EN 15221-3:2011-12 | Facility Management - Part 3: Guidance on quality in Facility Management |
| BS EN 15283-1 : 2008 | GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT |
| PREN ISO 19900 : DRAFT 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - GENERAL REQUIREMENTS FOR OFFSHORE STRUCTURES (ISO/DIS 19900:2012) |
| PREN 1871 : DRAFT 2012 | ROAD MARKING MATERIALS - PAINT, THERMOPLASTIC AND COLD PLASTIC MATERIALS - SPECIFICATIONS |
| ISO/TR 22869:2005 | Medical laboratories Guidance on laboratory implementation of ISO 15189: 2003 |
| DIN EN 1591-4:2013-12 | Flanges and their joints - Part 4: Qualification of personnel competency in the assembly of the bolted connections of critical service pressurized systems |
| ISO 13411:1997 | Aerospace — Airframe needle roller, cylindrical roller and track roller bearings — Technical specification |
| EN 13600:2013 | Copper and copper alloys - Seamless copper tubes for electrical purposes |
| PREN 14188-2 : DRAFT 2014 | JOINT FILLERS AND SEALANTS - PART 2: SPECIFICATIONS FOR COLD APPLIED SEALANTS |
| PREN 1422 : DRAFT 2011 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| DIN EN 16582-2:2015-11 | DOMESTIC SWIMMING POOLS - PART 2: SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR INGROUND POOLS |
| BS EN 12261:2002 | Gas meters. Turbine gas meters |
| UNI EN 16309 : 2014-10 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
| 15/30265353 DC : 0 | BS EN 62271-1 ED 2 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR |
| 12/30235270 DC : 0 | BS EN 50126-2 - RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 2: SYSTEMS APPROACH TO SAFETY |
| BS ISO 27914:2017 | Carbon dioxide capture, transportation and geological storage. Geological storage |
| 02/560598 DC : DRAFT FEB 2002 | ISO/DIS 13485 - QUALITY SYSTEMS - MEDICAL DEVICES - SYSTEM REQUIREMENTS FOR REGULATORY PURPOSES |
| 15/30328778 DC : 0 | BS EN 13251 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN EARTHWORKS, FOUNDATIONS AND RETAINING STRUCTURES |
| DIN EN 10088-4:2010-01 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| UNE-EN 13674-4:2007 | Railway applications - Track - Rail - Part 4: Vignole railway rails from 27 kg/m to, but excluding 46 kg/m |
| 05/30097505 DC : 0 | PREN 15343 - PLASTICS - RECYCLED PLASTICS - PLASTICS RECYCLING TRACEABILITY AND ASSESSMENT OF CONFORMITY AND RECYCLED CONTENT |
| ASTM F 3201 : 2016 | Standard Practice for Ensuring Dependability of Software Used in Unmanned Aircraft Systems (UAS) |
| I.S. EN 15497:2014 | STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| ISO 21927-2:2006 | Smoke and heat control systems Part 2: Specification for natural smoke and heat exhaust ventilators |
| BS EN 15821:2010 | Multi-firing sauna stoves fired by natural wood logs. Requirements and test methods |
| BS IEC 60076-8:1997 | Power transformers Application guide |
| I.S. EN 16475-2:2017 | CHIMNEYS - ACCESSORIES - PART 2: CHIMNEY FANS - REQUIREMENTS AND TEST METHODS |
| S.R. CEN/TS 16880:2015 | SERVICE EXCELLENCE - CREATING OUTSTANDING CUSTOMER EXPERIENCES THROUGH SERVICE EXCELLENCE |
| 12/30258747 DC : DRAFT MAR 2012 | BS EN 12583 - GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS |
| DIN EN 16034:2014-12 | PEDESTRIAN DOORSETS, INDUSTRIAL, COMMERCIAL, GARAGE DOORS AND OPENABLE WINDOWS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - FIRE RESISTANCE AND/OR SMOKE CONTROL CHARACTERISTICS |
| API 5L RUSSIAN : 2012 | SPECIFICATION FOR LINE PIPE |
| 04/30103157 DC : DRAFT MARCH 2004 | BS EN 12094-8 - FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 8 - REQUIREMENTS AND TEST METHODS FOR FLEXIBLE CONNECTORS |
| BS EN 15213-4:2013 | Intelligent transport systems. After-theft systems for the recovery of stolen vehicles Interface and system requirements in terms of long range communication system |
| CEI UNI EN 45510-6-7 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-7: TURBINE AUXILIARIES - MOISTURE SEPARATOR REHEATERS |
| 14/30295030 DC : 0 | BS ISO/IEC 17021-1 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 1: REQUIREMENTS |
| DIN EN 16309:2014-12 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
| BS ISO 29400:2015 | Ships and marine technology. Offshore wind energy. Port and marine operations |
| 11/30191093 DC : 0 | BS ISO 10799-1 - COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| CSA ISO/IEC 90003 : 2004 | SOFTWARE ENGINEERING - GUIDELINES FOR THE APPLICATION OF ISO 9001:2000 TO COMPUTER SOFTWARE |
| PD ISO/TS 14033:2012 | Environmental management. Quantitative environmental information. Guidelines and examples |
| BS EN 1591-4:2013 | Flanges and their joints Qualification of personnel competency in the assembly of the bolted connections of critical service pressurized systems |
| ISO 11133:2014 | Microbiology of food, animal feed and water — Preparation, production, storage and performance testing of culture media |
| UNI CEN/TS 1452-7 : 2014 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| ISO 13918:2017 | Welding — Studs and ceramic ferrules for arc stud welding |
| 14/30295890 DC : 0 | BS EN 1330-1 - NON-DESTRUCTIVE TESTING - TERMINOLOGY - PART 1: LIST OF GENERAL TERMS |
| BS ISO 26262-1:2011 | Road vehicles. Functional safety Vocabulary |
| BS ISO 10955:1999 | End-fittings and turnbarrels for aircraft control wire rope. Technical specification |
| 10/30197164 DC : 0 | BS ISO 11893 - SPACE SYSTEMS - PROGRAMME MANAGEMENT - PROJECT ORGANIZATION |
| 07/30162632 DC : 0 | BS ISO 4642-2 - RUBBER AND PLASTICS HOSES, NON-COLLAPSIBLE, FOR FIRE-FIGHTING SERVICE - PART 2: SEMI-RIGID HOSES (AND HOSE ASSEMBLIES) FOR PUMPS AND VEHICLES |
| AAMI ISO 20857 : 2010 | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| BS ISO 24510:2007 | Activities relating to drinking water and wastewater services. Guidelines for the assessment and for the improvement of the service to users |
| BS EN ISO 14253-2:2011 | Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
| BS PD ISO/TR 13881 : 2001 | PETROLEUM AND NATURAL GAS INDUSTRIES - CLASSIFICATION AND CONFORMITY ASSESSMENT OF PRODUCTS, PROCESSES AND SERVICES |
| BS ISO/IEC 15423:2004 | Information technology. Automatic identification and data capture techniques. Bar code scanner and decoder performance testing |
| BS ISO 17258:2015 | Statistical methods. Six Sigma. Basic criteria underlying benchmarking for Six Sigma in organisations |
| BS EN ISO 20857:2013 | Sterilization of health care products. Dry heat. Requirements for the development, validation and routine control of a sterilization process for medical devices |
| 06/30123954 DC : DRAFT MAR 2006 | |
| BS EN 4137:2009 | Aerospace series. Bolts, normal bi-hexagonal head, stepped shank, long thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315°C |
| SAE AS 7107 : 2017 | NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM INSPECTION SYSTEM REQUIREMENTS |
| CSA Z245.20 SERIES : 2014 | PLANT-APPLIED EXTERNAL COATINGS FOR STEEL PIPE |
| DIN EN 16114:2011-12 | MANAGEMENT CONSULTANCY SERVICES |
| PREN 14915 : DRAFT 2013 | SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| 04/19988807 DC : DRAFT AUG 2004 | BS EN 14991 - PRECAST CONCRETE PRODUCTS - FOUNDATION ELEMENTS |
| 10/30218554 DC : 0 | BS ISO 13926-3 - PEN SYSTEMS - PART 3: SEALS FOR PEN-INJECTORS FOR MEDICAL USE |
| CSA Z24510 : 2010 : R2014 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE ASSESSMENT AND FOR THE IMPROVEMENT OF THE SERVICE TO USERS |
| BIS IS/ISO/TR 10013 : 2001(R2011) | GUIDELINES FOR QUALITY MANAGEMENT SYSTEM DOCUMENTATION |
| ISO/IEC/IEEE 26513:2017 | Systems and software engineering — Requirements for testers and reviewers of information for users |
| CSA Z259.2.3 : 2016 | DESCENT DEVICES |
| 14/30311660 DC : 0 | BS EN 9139 - AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - DEVELOPMENT OF PROCESS-BASED BODIES OF KNOWLEDGE |
| DD ISO/TS 10004:2010 | Quality management. Customer satisfaction. Guidelines for monitoring and measuring |
| SAE AS 7115 : 2017 | NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR ELASTOMER SEALS |
| 14/30311447 DC : 0 | BS EN 14055:2010/AMD 1 - WC AND URINAL FLUSHING CISTERNS |
| BS EN ISO/IEC 17021:2011 | Conformity assessment. Requirements for bodies providing audit and certification of management systems |
| API SPEC 20E : 2017 | ALLOY AND CARBON STEEL BOLTING FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| EN 12764:2015 | Sanitary appliances - Specification for whirlpool baths |
| I.S. EN 16590-3:2014 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 3: SERIES DEVELOPMENT, HARDWARE AND SOFTWARE (ISO 25119-3:2010 MODIFIED) |
| DIN EN 16590-2:2014-11 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase (ISO 25119-2:2010 modified) |
| I.S. EN 4137:2009 | AEROSPACE SERIES - BOLTS, NORMAL BI-HEXAGONAL HEAD, STEPPED SHANK, LONG THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PD IEC/TS 62564-1:2016 | Process management for avionics. Aerospace qualified electronic components (AQEC) Integrated circuits and discrete semiconductors |
| UNE-EN 15683-2:2014 | Glass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part 2: Evaluation of conformity/Product standard |
| BS ISO 10006:2017 | Quality management. Guidelines for quality management in projects |
| AAMI HE74 : 2001 | HUMAN FACTORS DESIGN PROCESS FOR MEDICAL DEVICES |
| I.S. EN 13407:2015 | WALL-HUNG URINALS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| S.R. CEN ISO/TS 22391-7:2011 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY (ISO/TS 22391-7:2011) |
| S.R. CLC/TR 50503:2010 | GUIDELINES FOR THE INVENTORY CONTROL, MANAGEMENT, DECONTAMINATION AND/OR DISPOSAL OF ELECTRICAL EQUIPMENT AND INSULATING LIQUIDS CONTAINING PCBS |
| ISO/IEC 25010:2011 | Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — System and software quality models |
| I.S. EN ISO 10418:2003 | PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - ANALYSIS, DESIGN, INSTALLATION AND TESTING OF BASIC SURFACE PROCESS SAFETY SYSTEMS |
| UNE-EN 124-4:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 4: Gully tops and manhole tops made of steel reinforced concrete |
| BS EN 4129:2009 | Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature) / 235°C |
| BS ISO 28004-1:2007 | Security management systems for the supply chain. Guidelines for the implementation of ISO 28000 |
| UNE 179008:2016 | Quality management system for liver transplantation units |
| SAE AS 9115 : 2017 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE, AND DEFENSE ORGANIZATIONS - DELIVERABLE SOFTWARE (SUPPLEMENT TO 9100:2016) |
| 13/30266550 DC : 0 | BS EN 14509 - SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| DIN EN 15821:2011-01 | Multi-firing sauna stoves fired by natural wood logs - Requirements and test methods |
| NSF 457 : 2017 | SUSTAINABILITY LEADERSHIP STANDARD FOR PHOTOVOLTAIC MODULES |
| BS 5750-14:1993 | Quality systems Guide to dependability programme management |
| DIN EN 13480 Beiblatt 1:2002-08 | Metallic industrial piping - Part 7: Guidance on the use of conformity assessment procedures |
| API TR 1PER15K-1 : 2013 | PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT |
| 11/30249117 DC : 0 | BS EN 14342 - WOOD FLOORING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| PD ISO/PAS 28007:2012 | Ships and marine technology. Guidelines for Private Maritime Security Companies (PMSC) providing privately contracted armed security personnel (PCASP) on board ships (and pro forma contract) |
| PD ISO/TR 10013:2001 | Guidelines for quality management system documentation |
| 14/30272945 DC : 0 | BS ISO 18400-103 - SOIL QUALITY - SAMPLING - PART 103: SAFETY |
| ISO 50001:2011 | Energy management systems Requirements with guidance for use |
| I.S. EN 13616-2:2016 | OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - PART 2: OVERFILL PREVENTION DEVICES WITHOUT A CLOSURE DEVICE |
| 08/30184309 DC : DRAFT SEP 2008 | BS EN 12952-5 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
| UNE-EN 14636-1:2010 | Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC) - Part 1: Pipes and fittings with flexible joints |
| 12/30262894 DC : 0 | BS EN 14180 - STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| DD CEN/TS 14816:2008 | Fixed firefighting systems. Water spray systems. Design and installation |
| BS ISO 27025:2010 | Space systems. Programme management. Quality assurance requirements |
| 17/30321076 DC : 0 | BS ISO 22000 - FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS FOR ANY ORGANIZATION IN THE FOOD CHAIN |
| NFPA 1971:2018 | Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting |
| TR 102 847 : 1.1.1 | USER GROUP; QUALITY OF ICT SERVICES; STANDARDIZATION AND REGULATION REFERENCES IN THE METERING AND BILLING AREA |
| DIN EN ISO 3266:2016-05 | FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010 + AMD 1:2015) |
| I.S. EN ISO 17665-1:2006 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ISO 10018:2012 | Quality management Guidelines on people involvement and competence |
| UNI CEI 70019 : 2008 | CONFORMITY ASSESSMENT - ARRANGEMENTS FOR THE RECOGNITION AND ACCEPTANCE OF CONFORMITY ASSESSMENT RESULTS |
| BS IEC 60092-306:2009 | Electrical installations in ships Equipment. Luminaires and lighting accessories |
| DD CEN ISO/TS 21432:2005 | Non-destructive testing. Standard test method for determining residual stresses by neutron diffraction |
| CSA PLUS 15189 : 2010 | THE ISO 15189:2007 ESSENTIALS - A PRACTICAL HANDBOOK FOR IMPLEMENTING THE ISO 15189:2007 STANDARD FOR MEDICAL LABORATORIES |
| 15/30318290 DC : 0 | BS EN ISO 17662 - WELDING - CALIBRATION, VERIFICATION AND VALIDATION OF EQUIPMENT USED FOR WELDING, INCLUDING ANCILLARY ACTIVITIES |
| UNI EN 15343 : 2008 | PLASTICS - RECYCLED PLASTICS - PLASTICS RECYCLING TRACEABILITY AND ASSESSMENT OF CONFORMITY AND RECYCLED CONTENT |
| I.S. EN 50575:2014 | POWER, CONTROL AND COMMUNICATION CABLES - CABLES FOR GENERAL APPLICATIONS IN CONSTRUCTION WORKS SUBJECT TO REACTION TO FIRE REQUIREMENTS |
| 16/30338105 DC : 0 | BS EN 16994 - CLAY GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF UNDERGROUND STRUCTURES (OTHER THAN TUNNELS AND ASSOCIATED STRUCTURES) |
| BS EN 15651-5:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways Assessment and verification of constancy of performance, marking and labelling |
| I.S. EN 4074:2009 | AEROSPACE SERIES - SCREWS, PAN HEAD, SIX LOBE RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 14587-1 : DRAFT 2017 | RAILWAY APPLICATIONS - INFRASTRUCTURE - FLASH BUTT WELDING OF NEW RAILS - PART 1: R220, R260, R260MN, R320CR, R350HT, R350LHT, R370CRHT AND R400HT GRADE RAILS IN A FIXED PLANT |
| ISO/TS 18864:2017 | Health informatics — Quality metrics for detailed clinical models |
| 15/30328933 DC : 0 | BS EN 9100 - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE ORGANIZATIONS |
| 14/30292283 DC : 0 | BS EN 13230-2 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 2: PRESTRESSED MONOBLOCK SLEEPERS |
| DIN ISO 9000-3:1992-06 | QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - PART 3: GUIDELINES FOR THE APPLICATION OF ISO 9001 TO THE DEVELOPMENT, SUPPLY AND MAINTENANCE OF SOFTWARE |
| 11/30203534 DC : DRAFT AUG 2011 | BS ISO 13270 - STEEL FIBRES FOR CONCRETE - DEFINITIONS AND SPECIFICATIONS |
| TR 103 386 : 1.1.1 | METHODS FOR TESTING AND SPECIFICATIONS (MTS) DEPLOYMENT OF MODEL-BASED AUTOMATED TESTING INFRASTRUCTURE IN A CLOUD |
| BS EN 50588-1:2017 | Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV General requirements |
| 12/30264441 DC : 0 | BS ISO 16049-2 - AIR CARGO EQUIPMENT - RESTRAINT STRAPS - PART 2: UTILIZATION GUIDELINES AND LASHING CONDITIONS |
| BS EN 62155:2003 | Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V |
| ISO 14253-2:2011 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
| BS 5724-1.4(1997) : 1997 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-4: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD - GENERAL REQUIREMENTS FOR PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS |
| BS EN 2043:2013 | Aerospace series. Metallic materials. General requirements for semi-finished product qualification (excluding forgings and castings) |
| ISO/TR 27809:2007 | Health informatics Measures for ensuring patient safety of health software |
| ISO 9004-1:1994 | Quality management and quality system elements Part 1: Guidelines |
| DD ISO/PAS 28000:2005 | Specification for security management systems for the supply chain |
| BS EN 4134:2009 | Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in heat resisting nickel base alloy, aluminium IVD coated. Classification: 1250 MPa (at ambient temperature)/425°C |
| 17/30339710 DC : 0 | BS ISO 21138-3 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: PIPES AND FITTINGS WITH NON-SMOOTH EXTERNAL SURFACE, TYPE B |
| 11/30235688 DC : 0 | BS EN 13240 - ROOM HEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| 17/30359420 DC : 0 | BS ISO 10001 - QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR CODES OF CONDUCT FOR ORGANIZATIONS |
| 16/30299984 DC : 0 | BS ISO 45001 - OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| 17/30362102 DC : DRAFT AUG 2017 | BS ISO 21927-4 - SMOKE AND HEAT CONTROL SYSTEMS - PART 4: NATURAL SMOKE AND HEAT EXHAUST VENTILATORS; DESIGN, REQUIREMENTS AND INSTALLATION |
| 17/30319994 DC : 0 | BS ISO 20313 - SHIPS AND MARINE TECHNOLOGY - CATHODIC PROTECTION OF SHIPS |
| BS ISO 55000:2014 | Asset management Overview, principles and terminology |
| 15/30328784 DC : 0 | BS EN 13257 - GEOTEXTILES AND GEOTEXTILE-RELATED DOCUMENTS - CHARACTERISTICS REQUIRED FOR USE IN SOLID WASTE DISPOSALS |
| UNE-EN 15651-5:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 5: Assessment and verification of constancy of performance, marking and labelling |
| 07/30161531 DC : 0 | BS ISO 28001 - SECURITY MANAGEMENT SYSTEMS FOR THE SUPPLY CHAIN - BEST PRACTICES FOR IMPLEMENTING SUPPLY CHAIN SECURITY, ASSESSMENTS AND PLANS - REQUIREMENTS AND GUIDANCE |
| 14/30294473 DC : 0 | BS EN 488 - DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - STEEL VALVE ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| BS EN 12101-7:2011 | Smoke and heat control systems Smoke duct sections |
| UNI EN 13674-4 : 2010 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| BS ISO 23933:2006 | Aerospace series. Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135°C/20 684 kPa (275°F/3 000 psi) and 135°C/21 000 kPa (275°F/3 046 psi). Procurement specification |
| BS EN 1090-1 : 2009 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS |
| BS IEC 63004:2015 | Standard for receiver fixture interface |
| SAE AS 9100D : 2016 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE ORGANIZATIONS |
| BS 4778-1:1987 | Quality vocabulary International terms |
| 08/30185727 DC : DRAFT JULY 2008 | BS EN ISO 14344 - WELDING AND ALLIED PROCESSES - FLUX AND GAS SHIELDED ELECTRICAL WELDING PROCESSES - PROCUREMENT GUIDELINES FOR CONSUMABLES |
| 12/30264438 DC : 0 | BS ISO 6517 - AIR CARGO - CERTIFIED LOWER DECK CONTAINERS - DESIGN AND TESTING |
| 12/30259073 DC : 0 | BS EN 764-5 - PRESSURE EQUIPMENT - PART 5: INSPECTION DOCUMENTATION OF METALLIC MATERIALS AND COMPLIANCE WITH THE MATERIAL SPECIFICATION |
| 05/30117311 DC : 0 | EN 54-25 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS AND SYSTEM REQUIREMENTS |
| BS EN 10223-8:2013 | Steel wire and wire products for fencing and netting Welded mesh gabion products |
| BS EN 15681-2:2017 | Glass in Building. Basic alumino silicate glass products Product standard |
| 15/30323537 DC : 0 | BS EN 16887 - LEATHER - ENVIRONMENTAL FOOTPRINT - PRODUCT CATEGORY RULES (PCR) - CARBON FOOTPRINTS |
| BS ISO/IEC/IEEE 29119-2:2013 | Software and systems engineering. Software testing Test processes |
| 02/202973 DC : 0 | IEC 60832-2. ED.2 - LIVE WORKING - INSULATING STICKS AND ATTACHABLE UNIVERSAL DEVICES (FITTINGS) - PART 2: ATTACHABLE UNIVERSAL DEVICES (FITTINGS) |
| BS ISO 14885:2014 | Large yachts. Diesel engines for main propulsion and essential auxiliaries. Safety requirements |
| 16/30346829 DC : 0 | BS ISO 16038 - MALE CONDOMS - GUIDANCE ON THE USE OF ISO 4074 AND ISO 23409 IN THE QUALITY MANAGEMENT CONDOMS |
| API 9A : 2011 : INC : ERR 1 : 2012 : R2016 | SPECIFICATION FOR WIRE ROPE |
| PD CEN/TR 15545:2006 | Guide to the use of EN 545 |
| 08/30184642 DC : 0 | BS EN 1463-1 - ROAD MARKING MATERIALS - RETROREFLECTING ROAD STUDS - PART 1: INITIAL PERFORMANCE REQUIREMENTS |
| DEFSTAN 00-54(PT1)/1(1999) : 1999 | REQUIREMENTS FOR SAFETY RELATED ELECTRONIC HARDWARE IN DEFENCE EQUIPMENT - PART 1: REQUIREMENTS |
| BS EN 61131-6:2012 | Programmable controllers Functional safety |
| 10/30232007 DC : 0 | BS EN ISO 28765 - VITREOUS AND PORCELAIN ENAMELS - DESIGN OF BOLTED STEEL TANKS FOR THE STORAGE OR TREATMENT OF WATER OR MUNICIPAL OR INDUSTRIAL EFFLUENTS AND SLUDGES |
| I.S. EN 11140-4:2007 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 4: CLASS 2 INDICATORS AS AN ALTERNATIVE TO THE BOWIE AND DICK-TYPE TEST FOR DETECTION OF STEAM PENETRATION |
| 16/30338123 DC : 0 | BS EN 16993 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF STORAGE LAGOONS, SECONDARY CONTAINMENT (ABOVE AND BELOW GROUND) AND OTHER CONTAINMENT APPLICATIONS FOR CHEMICALS, POLLUTED WATER AND PRODUCED LIQUIDS |
| 15/30282559 DC : 0 | BS EN ISO 11137-3 - STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL |
| UNE-EN 1457-2:2013 | Chimneys - Clay/ceramic flue liners - Part 2: Flue liners operating under wet conditions - Requirements and test methods |
| BS ISO/IEC 15944-9:2015 | Information technology. Business Operational View Business transaction traceability framework for commitment exchange |
| BS ISO 18797-1 : 2016 COR 2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMSPOLYCHLOROPRENE OR EPDM |
| 13/30271254 DC : 0 | BS ISO 11077 - AEROSPACE - SELF-PROPELLED DE-ICING/ANTI-ICING VEHICLES - FUNCTIONAL REQUIREMENTS |
| PREN 14296 : DRAFT 2014 | SANITARY APPLIANCES - COMMUNAL WASHING TROUGHS |
| 99/124125 DC : DRAFT NOV 1999 | BS EN ISO 15883-1 - WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, DEFINITIONS AND TESTS |
| 13/30277457 DC : 0 | BS EN 1776 - GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS |
| UNI EN 14846 : 2008 | BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| BS EN 13674-2 : 2006 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| 14/30297267 DC : 0 | BS ISO/IEC/IEEE 15288 - SYSTEMS AND SOFTWARE ENGINEERING - SYSTEM LIFE CYCLE PROCESSES |
| PREN 14535-2 : DRAFT 2016 | RAILWAY APPLICATIONS - BRAKE DISCS FOR RAILWAY ROLLING STOCK - PART 2: BRAKE DISCS MOUNTED ONTO THE WHEEL, DIMENSIONS AND QUALITY REQUIREMENTS |
| EN 15129:2018 | Anti-seismic devices |
| UNE-EN 14535-2:2012 | Railway applications - Brake discs for railway rolling stock - Part 2: Brake discs mounted onto the wheel, dimensions and quality requirements |
| BS EN 61189-5-3:2015 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies General test methods for materials and assemblies. Soldering paste for printed board assemblies |
| 04/30103167 DC : DRAFT MARCH 2004 | BS EN 12094-6 - FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 6 - REQUIREMENTS AND TEST METHODS FOR NON-ELECTRICAL DISABLE DEVICES FOR CO2 SYSTEMS |
| I.S. EN ISO 3834-1:2006 | QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS - PART 1: CRITERIA FOR THE SELECTION OF THE APPROPRIATE LEVEL OF QUALITY REQUIREMENTS |
| ANSI CGATS/ISO 15790 : 2005(R2007) | GRAPHIC TECHNOLOGY AND PHOTOGRAPHY - CERTIFIED REFERENCE MATERIALS FOR REFLECTION AND TRANSMISSION METROLOGY - DOCUMENTATION AND PROCEDURES FOR USE, INCLUDING DETERMINATION OF COMBINED STANDARD UNCERTAINTY |
| NFPA 1936 : 2015 | POWERED RESCUE TOOLS |
| 11/30240275 DC : 0 | BS EN 54-22 - FIRE DETECTION AND FIRE ALARM SYSTEM - PART 22: RESETTABLE LINE TYPE HEAT DETECTORS |
| 17/30293100 DC : 0 | BS ISO 19882 - GASEOUS HYDROGEN - THERMALLY ACTIVATED PRESSURE RELIEF DEVICES FOR COMPRESSED HYDROGEN VEHICLE FUEL CONTAINERS |
| PD ISO/TR 14062:2002 | Environmental management. Integrating environmental aspects into product design and development |
| 17/30347919 DC : 0 | BS ISO 10005 - QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY PLANS |
| BS EN 50483-1:2009 | Test requirements for low voltage aerial bundled cable accessories Generalities |
| BS ISO 4642-1:2015 | Rubber and plastics hoses, non-collapsible, for fire-fighting service Semi-rigid hoses for fixed systems |
| BS ISO/IEC 25010:2011 | Systems and software engineering. Systems and software quality requirements and evaluation (SQuaRE). System and software quality models |
| PD CEN/TS 1401-2:2012 | Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for assessment of conformity |
| BS ISO 21927-10:2011 | Smoke and heat control systems Specification for power output devices |
| BS EN 10088-5:2009 | Stainless steels Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
| 17/30354892 DC : 0 | BS ISO 10290 - TEXTILES - COTTON YARNS - BASIS FOR SPECIFICATION |
| 15/30328790 DC : 0 | BS EN 13249 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF ROADS AND OTHER TRAFFICKED AREAS (EXCLUDING RAILWAYS AND ASPHALT INCLUSION) |
| 04/30055611 DC : 0 | BS EN 124 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS |
| UNE-EN 15048-1:2018 | Non-preloaded structural bolting assemblies - Part 1: General requirements |
| UNI EN 15644 : 2009 | TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS |
| PREN 14382 : DRAFT 2016 | GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURE UP TO 100 BAR |
| UNI EN ISO 13628-15 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS |
| UNI EN 15283-2 : 2009 | GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS |
| PD CEN/TS 13598-3:2012 | Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride)(PVC-U), polypropylene (PP) and polyethylene (PE) Guidance for assessment of conformity |
| DIN EN 14229:2011-02 | Structural timber - Wood poles for overhead lines |
| 10/30216684 DC : 0 | BS EN 45545-1 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL |
| 03/319521 DC : DRAFT NOV 2003 | ISO/IEC 17040 - GENERAL REQUIREMENTS FOR PEER ASSESSMENT OF CONFORMITY ASSESSMENT BODIES |
| DEFSTAN 00-54(PT2)/1(1999) : 1999 | REQUIREMENTS FOR SAFETY RELATED ELECTRONIC HARDWARE IN DEFENCE EQUIPMENT - PART 2: GUIDANCE |
| DIN EN 54-26:2015-11 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 26: CARBON MONOXIDE DETECTORS - POINT DETECTORS |
| BIP 0140 : 2014 | UNDERSTANDING THE NEW ISO MANAGEMENT SYSTEM REQUIREMENTS |
| 12/30255284 DC : DRAFT APR 2012 | BS EN 1096-4 - GLASS IN BUILDING - COATED GLASS - PART 4: EVALUATION OF CONFORMITY - PRODUCT STANDARD |
| BS ISO 10018:2012 | Quality management. Guidelines on people involvement and competence |
| BS ISO/IEC 26513:2009 | Systems and software engineering. Requirements for testers and reviewers of user documentation |
| SAE AS 23053 : 2016 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR |
| 02/400807 DC : DRAFT SEP 2002 | BS EN 14534 - POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF THE TRANSIT TIME OF END-TO-END SERVICES FOR BULK MAIL |
| PD CEN/CLC ISO/IEC TS 17021-3:2016 | Conformity assessment. Requirements for bodies providing audit and certification of management systems Competence requirements for auditing and certification of quality management systems |
| BS IEC 61513:2011 | Nuclear power plants. Instrumentation and control important to safety. General requirements for systems |
| BS ISO 15741:2016 | Paints and varnishes. Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases |
| BS ISO 22301 : 2012 | SOCIETAL SECURITY - BUSINESS CONTINUITY MANAGEMENT SYSTEMS - REQUIREMENTS |
| BS EN 16034:2014 | Pedestrian doorsets, industrial, commercial, garage doors and openable windows. Product standard, performance characteristics. Fire resisting and/or smoke control characteristics |
| PD CEN/TR 15569:2009 | Solid biofuels. A guide for a quality assurance system |
| BS EN 124-2:2015 | Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of cast iron |
| BS ISO 16049-2:2013 | Air cargo equipment. Restraint straps Utilization guidelines and lashing calculations |
| BS EN 62326-1:2002 | Printed boards Generic specification |
| BS EN ISO/IEC 80079-34:2011 | Explosive atmospheres Application of quality systems for equipment manufacture |
| 15/30295860 DC : 0 | BS EN 61207-2 ED. 2.0 - EXPRESSION OF PERFORMANCE OF GAS ANALYZERS - PART 2: OXYGEN IN GAS (UTILIZING HIGH-TEMPERATURE ELECTROCHEMICAL SENSORS) |
| BS EN ISO 9004-1:1994 | Quality management and quality assurance standards. Guidelines |
| 14/30298720 DC : 0 | BS ISO/IEC 15944-9 - INFORMATION TECHNOLOGY - BUSINESS OPERATIONAL VIEW - PART 9: BUSINESS TRANSACTION TRACEABILITY FRAMEWORK FOR COMMITMENT EXCHANGE |
| BS W 14:1999 | Aircraft control wire rope assemblies. Technical specification |
| 02/206916 DC : DRAFT MAY 2002 | IEC 62237. ED.1 - LIVE WORKING - INSULATING HOSES FOR USE WITH HYDRAULIC TOOLS AND EQUIPMENT |
| 06/30134861 DC : DRAFT MAY 2006 | |
| 04/30115148 DC : DRAFT JUNE 2004 | ISO/IEC 14764 ED.2 - SOFTWARE ENGINEERING - SOFTWARE LIFE CYCLE PROCESSES - MAINTENANCE |
| 18/30354698 DC : DRAFT FEB 2018 | BS ISO 8000-63 - DATA QUALITY - PART 63: DATA QUALITY MANAGEMENT: PROCESS MEASUREMENT |
| BS EN 16582-2:2015 | Domestic swimming pools Specific requirements including safety and test methods for inground pools |
| BS EN 16222:2012 | Cathodic protection of ship hulls |
| 11/30252448 DC : 0 | BS EN 1422 - STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| 08/30159339 DC : DRAFT JUNE 2008 | BS EN 12668-1 - NON-DESTRUCTIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC TESTING EQUIPMENT - PART 1: INSTRUMENTS |
| BS EN 61207-1:2010 | Expression of performance of gas analyzers General |
| 16/30315066 DC : 0 | BS EN 14604 - SMOKE ALARM DEVICES |
| OIML D 27 : 2001 | INITIAL VERIFICATION OF MEASURING INSTRUMENTS UTILIZING THE MANUFACTURER'S QUALITY MANAGEMENT SYSTEM |
| BS EN 16397-2:2014 | Flexible couplings Characteristics and testing for metal banded flexible couplings, adaptors and bushes |
| CEI UNI EN ISO/IEC 15423 : 2011 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE SCANNER AND DECODER PERFORMANCE TESTING |
| SAE AIR 6172A : 2017 | ICE UNDERCUTTING TEST METHOD FOR RUNWAYS AND TAXIWAYS DEICING/ANTI-ICING CHEMICALS |
| PREN 1935 : DRAFT 2012 | BUILDING HARDWARE - SINGLE-AXIS HINGES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 54-26:2015 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 26: CARBON MONOXIDE DETECTORS - POINT DETECTORS |
| DIN EN 15322:2013-07 | Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders |
| DIN EN 15228:2009-08 | STRUCTURAL TIMBER - STRUCTURAL TIMBER PRESERVATIVE TREATED AGAINST BIOLOGICAL ATTACK |
| 11/30249749 DC : 0 | BS EN 9110 - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION MAINTENANCE ORGANIZATIONS |
| EN 15344:2007 | Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates |
| PREN 1317-5 : DRAFT 2013 | ROAD RESTRAINT SYSTEMS - PART 5: PRODUCT REQUIREMENTS, TEST AND ASSESSMENT METHODS AND ACCEPTANCE CRITERIA |
| ISO/IEC TR 20000-3:2009 | Information technology — Service management — Part 3: Guidance on scope definition and applicability of ISO/IEC 20000-1 |
| 16/30314699 DC : 0 | BS ISO 37001 - ANTI-BRIBERY MANAGEMENT SYSTEMS |
| 03/307006 DC : DRAFT APR 2003 | ISO 20683-2 - AIRCRAFT GROUND EQUIPMENT - TOWBARLESS TOWING VEHICLE (TLTV) - DESIGN, TESTING AND MAINTENANCE REQUIREMENTS - PART 2: REGIONAL AIRCRAFT |
| PREN 14178-2 : DRAFT 2017 | GLASS IN BUILDING - BASIC ALKALINE EARTH SILICATE GLASS PRODUCTS - PART 2: PRODUCT STANDARD |
| PREN 14411 : DRAFT 2015 | CERAMIC TILES - DEFINITIONS, CLASSIFICATION, CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| I.S. EN 4134:2009 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1250 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| 11/30230287 DC : 0 | BS IEC 60494-1 - RAILWAY APPLICATIONS - ROLLING STOCK - PANTOGRAPHS - CHARACTERISTICS AND TESTS - PART 1: PANTOGRAPHS FOR MAIN LINES VEHICLES |
| PREN 12566-1 : DRAFT 2015 | SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 1: PREFABRICATED SEPTIC TANKS |
| BS HB10189(2001) : 2001 | ISO 9001: 2000 IN BRIEF |
| 05/30128543 DC : DRAFT JAN 2005 | IEC 60794-3-11 - OPTICAL FIBRE CABLES - PART 3-11: OUTDOOR CABLES - DUCT AND DIRECTLY BURIED OPTICAL TELECOMMUNICATION CABLES - DETAILED SPECIFICATION |
| DIN EN 13407:2015-09 | WALL-HUNG URINALS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| 16/30346580 DC : 0 | BS EN 13771-2 - COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 2: CONDENSING UNITS |
| DIN EN 124-6:2015-09 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) |
| 13/30238187 DC : 0 | BS ISO/IEC 15426-2 - INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE VERIFIER CONFORMANCE SPECIFICATION - PART 2: TWO-DIMENSIONAL SYMBOLS |
| 07/30160561 DC : 0 | BS ISO/IEC 12207 - SYSTEMS AND SOFTWARE ENGINEERING - SOFTWARE LIFE CYCLE PROCESSES |
| 14/30287753 DC : 0 | BS EN 62304 AMENDMENT 1 - MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE CYCLE PROCESSES |
| BS EN 16497-2:2017 | Chimneys. Concrete System Chimneys Balanced flue applications |
| BS ISO 15378 : 2006 AMD 17315 | PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2000, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP) |
| BS EN 3-10:2009 | Portable fire extinguishers Provisions for evaluating the conformity of a portable fire extinguisher to EN 3-7 |
| BS ISO 16762:2016 | Graphic technology. Post-press. General requirements for transfer, handling and storage |
| PD CLC/TR 50506-2:2009 | Railway applications. Communication, signalling and processing systems. Application guide for EN 50129 Safety assurance |
| DIN EN 14055:2015-09 | WC AND URINAL FLUSHING CISTERNS |
| CEI EN 62155 : 2004 | HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V |
| 13/30273039 DC : 0 | BS EN 13859-2 - FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 2: UNDERLAYS FOR WALLS |
| PD CEN/TR 16949:2016 | Road restraint system. Pedestrian restraint system. Pedestrian parapets |
| DD CLC/TS 50537-3:2010 | Railway applications. Mounted parts of the traction transformer and cooling system Water pump for traction converters |
| BS ISO 21927-9:2012 | Smoke and heat control systems Specification for control equipment |
| 05/30129859 DC : DRAFT FEB 2005 | EN 15161 - WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - INSPECTION, OPERATION, MAINTENANCE AND REPAIR |
| BS HB 10181(2001) : 2001 | TRANSITION TO ISO 9001:2000 - GUIDANCE ON ISO 9001:2000, QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS |
| 10/30199133 DC : 0 | BS ISO 14051 - ENVIRONMENTAL MANAGEMENT - MATERIAL FLOW COST ACCOUNTING - GENERAL FRAMEWORK |
| BS EN 14811 : 2006 | RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
| 17/30349181 DC : 0 | BS ISO/IEC 24760-1 AMENDMENT 1 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - A FRAMEWORK FOR IDENTITY MANAGEMENT - PART 1: TERMINOLOGY AND CONCEPTS |
| CNG FUEL INSPECTOR RESOURCE PACKAGE : 2013 | CONSISTS OF ANSI NGV 1-2006/CSA NGV 1-2006, COMPRESSED NATURAL GAS VEHICLE (NGV) FUELING CONNECTION DEVICES; ANSI PRD 1-2013, PRESSURE RELIEF DEVICES FOR NATURAL GAS VEHICLE (NGV) FUEL CONTAINERS; ANSI NGV 2-2007, COMPRESSED NATURAL GAS VEHICLE FUEL CONTAINERS; ANSI NGV 2A-2012, ADDENDA 1 TO ANSI NGV 2-2007, COMPRESSED NATURAL GAS VEHICLE FUEL CONTAINERS AND ANSI NGV 2B-2012 |
| BS EN 60896-21:2004 | Stationary lead-acid batteries Valve regulated types. Methods of test |
| 14/30292482 DC : 0 | BS EN 13230-4 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 4: PRESTRESSED BEARERS FOR SWITCHES AND CROSSINGS |
| CSA Z245.30 : 2014 | FIELD-APPLIED EXTERNAL COATINGS FOR STEEL PIPELINE SYSTEMS |
| 11/30237066 DC : 0 | BS EN ISO/IEC 17024 - CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR BODIES OPERATING CERTIFICATION OF PERSONS |
| BS ISO 11040-5:2012 | Prefilled syringes Plunger stoppers for injectables |
| 04/19983403 DC : DRAFT FEB 2004 | BS 6001-3 - SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 3: SKIP LOT SAMPLING PROCEDURES |
| DD CEN ISO/TS 29001:2011 | Petroleum, petrochemical and natural gas industries. Sector-specific quality management systems. Requirements for product and service supply organizations |
| BS EN 61811-50:2002 | Electromechanical all-or-nothing relays Sectional specification. Electromechanical all-or-nothing telecom relays of assessed quality |
| ONORM EN 15512 : 2010 | STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN |
| UNE-EN 14188-4:2010 | Joint fillers and sealants - Part 4: Specifications for primers to be used with joint sealants |
| BS EN ISO/IEC 17040:2005 | Conformity assessment. General requirements for peer assessment of conformity assessment bodies and accreditation bodies |
| BS ISO 20683-1:2005 | Aircraft ground equipment. Design, test and maintenance for towbarless towing vehicles (TLTV) interfaced with nose-landing gear Main-line aircraft |
| DIN EN 15497:2014-07 | STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| ISO 21927-10:2011 | Smoke and heat control systems — Part 10: Specification for power output devices |
| 09/30214226 DC : 0 | BS EN 60079-19 - EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION |
| 11/30229715 DC : 0 | BS EN ISO/IEC 17020 - CONFORMITY ASSESSMENT - GENERAL CRITERIA FOR THE OPERATION OF VARIOUS TYPES OF BODIES PERFORMING INSPECTION |
| DIN EN ISO 11607-2:2014-11 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES (ISO 11607-2:2006 + AMD 1.:2014) |
| BS ISO/IEC 20000-1:2011 | Information technology. Service management Service management system requirements |
| ASTM F 1108 : 2014 : REDLINE | Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406) |
| 15/30328769 DC : 0 | BS EN 13252 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN DRAINAGE SYSTEMS |
| BS 65000:2014 | Guidance on organizational resilience |
| I.S. EN ISO 11135:2014 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014) |
| BS ISO/IEC/IEEE 24748-4:2016 | Systems and software engineering. Life cycle management Systems engineering planning |
| 17/30344601 DC : 0 | BS EN ISO 10993-1 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS |
| 13/30275356 DC : 0 | BS EN 12966 - ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS |
| 03/102154 DC : DRAFT MAY 2003 | CEN TS 14632 - PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| CAN/CSA-C22.2 NO. 60896-21:17 | Stationary lead-acid batteries — Part 21: Valve regulated types — Methods of test (Adopted IEC 60896-21:2004, first edition, 2004-02, with Canadian deviations) | Batteries stationnaires au plomb — Partie 21 : Types étanches à soupapes — Méthodes d’essai (norme IEC 60896-21:2004 adoptee, première édition, 2004-02, avec exigences propres au Canada) |
| 12/30244420 DC | BS ISO 13304. Radiological protection. Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation |
| 14/30271159 DC : 0 | BS ISO/IEC 24748-4 - SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE MANAGEMENT - PART 4: SYSTEMS ENGINEERING PLANNING |
| BS EN 124-6:2015 | Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) |
| BS EN 61207-6:2015 | Expression of performance of gas analyzers Photometric analyzers |
| DIN EN ISO 13408-1:2015-12 | Aseptic processing of health care products - Part 1: General requirements (ISO 13408-1:2008, including Amd 1:2013) |
| BS 7208-16(1998) : 1998 | OPHTHALMIC OPTICS - CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - GUIDANCE FOR CLINICAL INVESTIGATIONS |
| 05/30132762 DC : 0 | PREN 15229 - PLASTICS PIPING SYSTEMS - PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - PERFORMANCE REQUIREMENTS FOR THERMOPLASTICS MANHOLES AND INSPECTION CHAMBERS |
| BS EN 50502:2015 | Railway applications. Rolling stock. Electric equipment in trolley buses. Safety requirements and current collection systems |
| I.S. EN 12449:2016 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
| AAMI ST63 : 2002 | STERILIZATION OF HEALTH CARE PRODUCTS - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF AN INDUSTRIAL STERILIZATION PROCESS FOR MEDICAL DEVICES - DRY HEAT |
| 13/30278343 DC : 0 | BS EN 62246-1 - REED SWITCHES - PART 1: GENERIC SPECIFICATION |
| 04/30115599 DC : DRAFT JUN 2004 | ISO 8913 - AEROSPACE SERIES - LIGHTWEIGHT POLYTETRAFLUOROETHYLENE (PTFE) HOSE ASSEMBLIES, CLASSIFICATION 400 DEGREE F/3000 PSI, 204 DEGREE C/21000 KPA |
| BS ISO/IEC 14598-5:1998 | Information technology. Software production evaluation Process for evaluators |
| 17/30337809 DC : DRAFT JAN 2017 | BS EN 15512 - STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN |
| 15/30179639 DC : 0 | BS EN 14508 - POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF THE TRANSIT TIME OF END-TO-END SERVICES FOR SINGLE PIECE NON-PRIORITY MAIL AND SECOND CLASS MAIL |
| 10/30217031 DC : 0 | EN 12446 - CHIMNEYS - COMPONENTS - CONCRETE OUTER WALL ELEMENTS |
| BS EN 61511-1 : 2017 | FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND APPLICATION PROGRAMMING REQUIREMENTS (IEC 61511-1:2016 + COR1:2016) |
| I.S. EN 334:2005 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| BS EN 16647:2015 | Fireplaces for liquid fuels. Decorative appliances producing a flame using alcohol based or gelatinous fuel. Use in private households |
| UNE-EN 50206-1:2011 | Railway applications - Rolling stock - Pantographs: Characteristics and tests -- Part 1: Pantographs for main line vehicles |
| 12/30252545 DC : 0 | BS ISO 15883-1:2006/AMD - WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| UNE-ISO/IEC TS 17027:2015 | Conformity assessment -- Vocabulary related to competence of persons used for certification of persons |
| UNE-EN 1090-1:2011 | Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components |
| BS EN 16309 : 2014 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
| 17/30354834 DC : 0 | BS EN ISO 19011 - GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS |
| 11/30239473 DC : 0 | BS EN 10025-1 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| 10/30233309 DC : 0 | BS EN 10255 - NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 13290-1:1999 | SPACE PROJECT MANAGEMENT - GENERAL REQUIREMENTS - PART 1: POLICY AND PRINCIPLES |
| 00/202803 DC : DRAFT JUN 2000 | |
| BS ISO/IEC TR 15504-2 : 2003 | SOFTWARE ENGINEERING - PROCESS ASSESSMENT - PART 2: PERFORMING AN ASSESSMENT |
| I.S. EN 15015:2009 | PLASTICS PIPING SYSTEMS - SYSTEMS FOR HOT AND COLD WATER NOT INTENDED FOR HUMAN CONSUMPTION - PERFORMANCE CHARACTERISTICS FOR PIPES, FITTINGS AND THEIR JOINTS |
| I.S. EN 15283-1:2008 | GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT |
| BS EN 1254-8:2012 | Copper and copper alloys. Plumbing fittings Fittings with press ends for use with plastics and multilayer pipes |
| 10/30216654 DC : 0 | BS EN 12842 - DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS |
| CLC/TS 50537-2:2010 | Railway applications - Mounted parts of the traction transformer and cooling system - Part 2: Pump for insulating liquid for traction transformers and reactors |
| 04/19969165 DC : 0 | BS EN 12259-9 - FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS - PART 9: DELUGE ALARM VALVE ASSEMBLIES |
| API Q2 RUSSIAN : 2014 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR SERVICE SUPPLY ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| UNI EN 15283-1 : 2009 | GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT |
| 12/30259316 DC : 0 | BS ISO 14885 - SHIPS AND MARINE TECHNOLOGY - LARGE YACHTS - AUXILIARY DIESEL ENGINES - SAFETY REQUIREMENTS |
| 15/30295265 DC : 0 | BS EN 13204 - DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
| 11/30235685 DC : 0 | BS EN 13229 - INSET APPLIANCES INCLUDING OPEN FIRES FIRED BY SOLID FUELS - REQUIREMENTS AND TEST METHODS |
| DIN EN 15012:2008-02 | Plastics piping systems - Soil and waste discharge systems within the building structure - Performance characteristics for pipes, fittings and their joints |
| UNI EN 15655 : 2009 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS |
| BS EN 15221-3:2011 | Facility Management Guidance on quality in Facility Management |
| BS EN ISO 13940:2016 | Health informatics. System of concepts to support continuity of care |
| 17/30325424 DC : 0 | BS ISO 25119-2 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE |
| BIP 2071 : 2005 | MEDICAL DEVICES: ISO 13485 AND ISO 9001 |
| DD CEN/TS 15234:2006 | Solid biofuels. Fuel quality assurance |
| 08/30138762 DC : DRAFT APR 2008 | BS EN ISO 11980 - OPHTHALMIC OPTICS - CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - GUIDANCE FOR CLINICAL INVESTIGATIONS |
| 12/30238553 DC : 0 | BS EN ISO 11140-1 - STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
| CSA ISO 26000 : 2016 | GUIDANCE ON SOCIAL RESPONSIBILITY |
| IEC 61506:1997 | Industrial-process measurement and control - Documentation ofapplication software |
| PREN 13674-1 : DRAFT 2009 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| 12/30254896 DC : 0 | BS EN 197-2 - CEMENT - PART 2: CONFORMITY EVALUATION |
| BS ISO 14470:2011 | Food irradiation. Requirements for the development, validation and routine control of the process of irradiation using ionizing radiation for the treatment of food |
| UNI CEN/TR 15569 : 2009 | SOLID BIOFUELS - A GUIDE FOR A QUALITY ASSURANCE SYSTEM |
| BS EN 50290-2-20:2016 | Communication cables Common design rules and construction. General |
| DD CEN/TS 45545-1:2009 | Railway applications. Fire protection on railway vehicles General |
| BS EN ISO 13628-15:2011 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea structures and manifolds |
| CEN/TR 16949:2016 | Road restraint system - Pedestrian restraint system - Pedestrian parapets |
| PD CEN/TS 1451-2:2012 | Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP) Guidance for the assessment of conformity |
| 11/30234814 DC : 0 | BS EN 1591-4 - FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 4: QUALIFICATION OF PERSONNEL COMPETENCY IN THE ASSEMBLY OF BOLTED JOINTS FITTED TO EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE |
| 07/30168410 DC : DRAFT DEC 2007 | BS EN 508-3 - ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 3: STAINLESS STEEL |
| 04/30118827 DC : DRAFT SEP 2004 | EN 15012 - SOIL AND WASTE DISCHARGE - PLASTICS PIPING SYSTEMS - SOIL AND WASTE DISCHARGE SYSTEMS WITHIN THE BUILDING STRUCTURE |
| 14/30270614 DC : 0 | BS EN 14065 - TEXTILES - LAUNDRY PROCESSED TEXTILES - BIOCONTAMINATION CONTROL SYSTEM |
| UNI EN 15542 : 2008 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL CEMENT MORTAR COATING FOR PIPES - REQUIREMENTS AND TEST METHODS |
| PD CEN/TR 16626:2014 | Vitrified clay pipe systems for drains and sewers. Guidance for voluntary third-party certification procedures |
| UNI CEI EN 16001 : 2009 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| BS EN 15650:2010 | Ventilation for buildings. Fire dampers |
| CSA S471 : 2004 | GENERAL REQUIREMENTS, DESIGN CRITERIA, THE ENVIRONMENT, AND LOADS |
| CSA Z14161 : 2011 : R2015 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| 10/30219009 DC : 0 | BS EN 15234-1 - SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 1: GENERAL REQUIREMENTS |
| BS ISO 19600:2014 | Compliance management systems. Guidelines |
| ISO 21927-3:2006 | Smoke and heat control systems Part 3: Specification for powered smoke and heat exhaust ventilators |
| BS EN 16351:2015 | Timber structures. Cross laminated timber. Requirements |
| PREN 1329-1 : DRAFT 2013 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| PREN 13771-1 : DRAFT 2014 | COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 1: REFRIGERANT COMPRESSORS |
| ISO 9154:2016 | Aerospace — Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa — Procurement specification |
| BS EN 14188-4:2009 | Joint fillers and sealants Specifications for primers to be used with joint sealants |
| DIN EN 16590-3:2015-04 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3: Series development, hardware and software (ISO 25119-3:2010 modified) |
| DIN EN ISO 22301:2014-12 | SOCIETAL SECURITY - BUSINESS CONTINUITY MANAGEMENT SYSTEMS - REQUIREMENTS (ISO 22301:2012) |
| 11/30248435 DC : 0 | BS EN 14891 - LIQUID-APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
| 14/30298856 DC : 0 | BS EN 9133 - AEROSPACE SERIES - QUALIFICATION PROCEDURE FOR AEROSPACE STANDARD PRODUCTS |
| DIN EN 16887:2015-07 (Draft) | LEATHER - ENVIRONMENTAL FOOTPRINT - PRODUCT CATEGORY RULES (PCR) - CARBON FOOTPRINTS |
| CSA E61496.1 :2004 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS |
| CSA Z11137-3 : 2007 : R2012 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS |
| 17/30349163 DC : 0 | BS ISO 20387 - BIOTECHNOLOGY - BIOBANKING - GENERAL REQUIREMENTS FOR BIOBANKING |
| BS ISO 14955-1:2017 | Machine tools. Environmental evaluation of machine tools Design methodology for energy-efficient machine tools |
| BS ISO/IEC 9126-1:2001 | Information technology. Software product quality Quality model |
| PD CEN/TR 16469:2013 | Hydrometry. Measurement of the rainfall intensity (liquid precipitation): requirements, calibration methods and field measurements |
| BS ISO/IEC 19796-1 : 2005 | INFORMATION TECHNOLOGY - LEARNING, EDUCATION AND TRAINING - QUALITY MANAGEMENT, ASSURANCE AND METRICS - PART 1: GENERAL APPROACH |
| UNE-EN 9120:2011 | Quality Management Systems - Requirements for Aviation, Space and Defence Distributors |
| BS ISO 10019:2005 | Guidelines for the selection of quality management system consultants and use of their services |
| 04/30066665 DC : DRAFT MARCH 2004 | BS ISO 13408-6 - ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 6 - ISOLATOR SYSTEMS |
| BS EN 15530:2008 | Aluminium and aluminium alloys. Environmental aspects of aluminium products. General guidelines for their inclusion in standards |
| BS EN 50215:2009 | Railway applications — Rolling stock — Testing of rolling stock on completion of construction and before entry into service |
| 03/103470 DC : DRAFT FEB 2003 | BS EN 10219-1 - COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY REQUIREMENTS |
| 14/30262728 DC : 0 | BS ISO 9000 - QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY |
| 16/30317608 DC : 0 | BS ISO/IEC/IEEE 26513 - SYSTEMS AND SOFTWARE ENGINEERING - REQUIREMENTS FOR TESTERS AND REVIEWERS OF USER DOCUMENTATION |
| BS ISO 28007-1:2015 | Ships and marine technology. Guidelines for Private Maritime Security Companies (PMSC) providing privately contracted armed security personnel (PCASP) on board ships (and pro forma contract) General |
| BS EN 61479:2001 | Live working. Flexible conductor covers (line hoses) of insulating material |
| 15/30289283 DC : 0 | BS EN 14516 - BATHS FOR DOMESTIC PURPOSES |
| BS ISO/IEC 24760-1:2011 | Information technology. Security techniques. A framework for identity management Terminology and concepts |
| BS ISO 10425:2003 | Steel wire ropes for the petroleum and natural gas industries. Minimum requirements and terms of acceptance |
| 18/30337228 DC : 0 | BS EN ISO 19900 - PETROLEUM AND NATURAL GAS INDUSTRIES - GENERAL REQUIREMENTS FOR OFFSHORE STRUCTURES |
| 08/30172145 DC : DRAFT FEB 2008 | BS EN 16001 - ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| UNE-EN 15821:2011 | Multi-firing sauna stoves fired by natural wood logs - Requirements and test methods |
| 10/30218985 DC : DRAFT JUNE 2010 | BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| BS EN 15286:2013 | Agglomerated stone. Slabs and tiles for wall finishes (internal and external) |
| 14/30294800 DC : 0 | BS EN 14901 - DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING (HEAVY DUTY) OF DUCTILE IRON FITTINGS AND ACCESSORIES - REQUIREMENTS AND TEST METHODS |
| ASTM F 560 : 2017 : REDLINE | Standard Specification for Unalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400) |
| PD CEN ISO/TR 24094:2007 | Analysis of natural gas. Validation methods for gaseous reference materials |
| BS EN 3712:2007 | Aerospace series. Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in steel, cadmium plated, MoS2, lubricated. Classification: 1100 MPa (at ambient temperature)/235 °C |
| 07/30161922 DC : 0 | BS EN 15650 - VENTILATION FOR BUILDINGS - DUCT MOUNTED FIRE DAMPERS |
| 12/30274800 DC : 0 | BS IEC 61189-5-3 ED.1 - TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-3: TEST METHODS FOR PRINTED BOARD ASSEMBLIES: SOLDERING PASTE |
| 14/30303591 DC : 0 | BS EN ISO 19694-1 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 1: GENERAL ASPECTS |
| BS ISO 404:2013 | Steel and steel products. General technical delivery requirements |
| PD ISO/IEC TR 20000-4:2010 | Information technology. Service management Process reference model |
| 04/30118854 DC : DRAFT SEP 2004 | EN 15015 - PLASTICS PIPING SYSTEMS - SYSTEMS FOR HOT AND COLD WATER NOT INTENDED FOR HUMAN CONSUMPTION - PERFORMANCE CHARACTERISTICS FOR PIPES, FITTINGS AND THEIR JOINTS |
| 08/30185757 DC : 0 | BS EN 1856-2 - CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 2: METAL FLUE LINERS AND CONNECTING FLUE PIPES |
| CEI UNI EN 45510-5-3 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-3: WIND TURBINES |
| PD ISO/TR 30406:2017 | Human resource management. Sustainable employability management for organizations |
| 16/30334077 DC : 0 | BS ISO 22241-3 - DIESEL ENGINES NO[X] REDUCTION AGENT AUS 32 - PART 3: HANDLING, TRANSPORTATION AND STORING |
| DIN EN 16590-1:2014-11 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development (ISO 25119-1:2010 modified) |
| DIN EN 15651-5:2016-10 (Draft) | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 5: ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, MARKING AND LABELLING |
| 04/30048205 DC : DRAFT JUL 2004 | BS EN ISO 17665 - STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| PD CEN ISO/TR 3834-6:2007 | Quality requirements for fusion welding of metallic materials Guidelines on implementing ISO 3834 |
| 14/30314741 DC : 0 | BS EN 14891 - LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
| 01/647707 DC : DRAFT AUG 2001 | ISO/IEC 15288 INFORMATION TECHNOLOGY - LIFE CYCLE MANAGEMENT - SYSTEM LIFE PROCESSES |
| PREN 1748-1-2 : DRAFT 2017 | GLASS IN BUILDING - SPECIAL BASIC PRODUCTS - BOROSILICATE FLOAT GLASS - PART 1-2: PRODUCT STANDARD |
| I.S. EN 61207-7:2013 | EXPRESSION OF PERFORMANCE OF GAS ANALYZERS - PART 7: TUNEABLE SEMICONDUCTOR LASER GAS ANALYZERS |
| 04/30098945 DC : DRAFT OCT 2004 | EN ISO 3452-2 - NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 2: TESTING OF PENETRANT MATERIALS |
| 15/30304304 DC : 0 | BS EN 12080 - RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| I.S. EN 1474-1:2008 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS |
| CSA S472 : 2004 | FOUNDATIONS |
| 00/243316 DC : DRAFT JUL 2000 | IEC 60494-1 - RAILWAY APPLICATIONS - ROLLING STOCK - PANTOGRAPHS - CHARACTERISTICS AND TESTS - PART 1: PANTOGRAPHS FOR MAIN LINE VEHICLES |
| ANSI/AAMI/ISO 16142-2:2017 | MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 2: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS |
| 02/400011 DC : DRAFT JAN 2002 | ISO 14001 - ENVIRONMENTAL MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| DD ENV 61111:2002 | Matting of insulating material for electrical purposes |
| UNI EN 15228 : 2009 | STRUCTURAL TIMBER - STRUCTURAL TIMBER PRESERVATIVE TREATED AGAINST BIOLOGICAL ATTACK |
| 02/121752 DC : DRAFT APR 2002 | PREN 438-7 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES |
| UNI CEN/TS 1519-2 : 2012 | PLASTIC PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLEN (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| CEI UNI EN 45510-6-9 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-9: TURBINE AUXILIARIES - COOLING WATER SYSTEMS |
| CLC/TS 50537-3:2010 | Railway applications - Mounted parts of the traction transformer and cooling system - Part 3: Water pump for traction converters |
| PREN 1304 : DRAFT 2012 | CLAY ROOFING TILES AND FITTINGS - PRODUCT DEFINITIONS AND SPECIFICATIONS |
| 03/305172 DC : DRAFT MAR 2003 | ISO 16412 - AIR CARGO EQUIPMENT - AIR CARGO PALLETS - UTILIZATION GUIDELINES |
| BS ISO 28598-1:2017 | Acceptance sampling procedures based on the allocation of priorities principle (APP) Guidelines for the APP approach |
| PREN 13859-1 : DRAFT 2013 | FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 1: UNDERLAYS FOR DISCONTINUOUS ROOFING |
| 11/30239433 DC : 0 | BS EN 12449 - COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
| IEC 61196-1-1:1995 | COAXIAL COMMUNICATION CABLES - PART 1-1: CAPABILITY APPROVAL FOR COAXIAL CABLES |
| UNE-CEN/TR 15628:2011 IN | Maintenance - Qualification of Maintenance personnel |
| BS ISO 18400-106:2017 | Soil quality. Sampling Quality control and quality assurance |
| DD CEN/TS 15718:2011 | Railway applications. Wheelsets and bogies. Product requirements for cast wheels |
| I.S. EN 1096-4:2004 | GLASS IN BUILDING - COATED GLASS - PART 4: EVALUATION OF CONFORMITY/PRODUCT STANDARD |
| AAMI HE74 : 2001 : R2009 | HUMAN FACTORS DESIGN PROCESS FOR MEDICAL DEVICES |
| ISO/TR 24679-2:2017 | Fire safety engineering Performance of structure in fire Part 2: Example of an airport terminal |
| BS EN 13924-1:2015 | Bitumen and bituminous binders. Specification framework for special paving grade bitumen Hard paving grade bitumens |
| DIN EN ISO 28765:2016-10 | Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges (ISO 28765:2016) |
| UNI EN 334 : 2009 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| DD ENV 1451-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP) Guidance for the assessment of conformity |
| BS ISO 15686-3:2002 | Buildings and constructed assets. Service life planning Performance audits and reviews |
| UNE-ISO 20121:2013 | Event sustainability management systems. Requirements with guidance for use. |
| DD IEC/PAS 61249-6-3:2011 | Specification for finished fabric woven from “E” glass for printed boards |
| CSA ISO TS 16949 : 2009 : R2015 | QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS |
| I.S. CEN TS 15234:2006 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE |
| BS ISO/IEC 15939:2007 | Systems and software engineering. Measurement process |
| 09/30204355 DC : 0 | ISO/TS 10004 - QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR MONITORING AND MEASURING |
| I.S. EN ISO 22301:2014 | SOCIETAL SECURITY - BUSINESS CONTINUITY MANAGEMENT SYSTEMS - REQUIREMENTS |
| PREN 764-5 : DRAFT 2012 | PRESSURE EQUIPMENT - PART 5: INSPECTION DOCUMENTATION OF METALLIC MATERIALS AND COMPLIANCE WITH THE MATERIAL SPECIFICATION |
| PREN 13454-1 : DRAFT 2017 | BINDERS AND FACTORY MADE MIXTURES FOR FLOOR SCREEDS BASED ON CALCIUM SULPHATE - PART 1: DEFINITIONS AND REQUIREMENTS |
| 04/30075589 DC : DRAFT JUL 2004 | BS ISO 22000 - FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS |
| S.R. CEN/TS 15718:2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - PRODUCT REQUIREMENTS FOR CAST WHEELS |
| 98/700240 DC : DRAFT JAN 1998 | ISO/CD 14300-1 - SPACE SYSTEMS - PROGRAMME MANAGEMENT |
| ISO 18385:2016 | Minimizing the risk of human DNA contamination in products used to collect, store and analyze biological material for forensic purposes — Requirements |
| BS EN 60794-4-20:2012 | Optical fibre cables Aerial optical cables along electrical power lines. Family specification for ADSS (All Dielectric Self Supported) optical cables |
| 04/30111859 DC : 0 | IEC 62271-1 - HIGH-VOLTAGE SWITCHGEAR AND CONTROL GEAR - PART 1: COMMON SPECIFICATIONS |
| UNE-EN ISO 17989-1:2016 | Tractors and machinery for agriculture and forestry - Sustainability - Part 1: Principles (ISO 17989-1:2015) |
| ISO 9933:1995 | Products in fibre-reinforced cement Long corrugated or asymmetrical section sheets and fittings for roofing and cladding |
| BS OHSAS 18002(2000) : 2000 AMD 14224 | OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - GUIDELINES FOR THE IMPLEMENTATION OF OHSAS 18001 |
| XP PREN 9000-3 : 1999 XP | AEROSPACE SERIES - AEROSPACE INDUSTRY QUALITY SYSTEM - PART 3: REQUIREMENTS APPLICABLE TO STOCKISTS-DISTRIBUTORS |
| BS EN 15593:2008 | Packaging. Management of hygiene in the production of packaging for foodstuffs. Requirements |
| BS ISO 3999:2004 | Radiation protection. Apparatus for industrial gamma radiography. Specifications for performance, design and tests |
| CEI EN 50483-1 : 2011 | TEST REQUIREMENTS FOR LOW VOLTAGE AERIAL BUNDLED CABLE ACCESSORIES - PART 1: GENERALITIES |
| 04/19985217 DC : DRAFT NOV 2004 | ISO 19903 - PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED CONCRETE OFFSHORE STRUCTURES |
| UNE-ISO/IEC 20000-1:2011 | Information technology. Service management. Part 1: Service Management System requirements |
| BS EN 61850-4:2011 | Communication networks and systems for power utility automation System and project management |
| ASTM F 2044 : 2009 | Standard Specification for Liquid Level Indicating Equipment, Electrical |
| PREN 12209 : DRAFT 2011 | BUILDING HARDWARE - MECHANICALLY OPERATED LOCKS AND LOCKING PLATES - REQUIREMENTS AND TEST METHODS |
| 15/30293506 DC : 0 | BS EN 14814 - ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS FOR FLUIDS UNDER PRESSURE - SPECIFICATIONS |
| 00/243317 DC : DRAFT JUL 2000 | |
| CSA ISO/IEC 15504-3 : 2005 : R2010 | INFORMATION TECHNOLOGY - PROCESS ASSESSMENT - PART 3: GUIDANCE ON PERFORMING AN ASSESSMENT |
| 03/115371 DC : DRAFT SEP 2003 | EN 14783 - FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOF COVERINGS AND WALL FINISHES |
| I.S. EN 9133:2005 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - QUALIFICATION PROCEDURE FOR AEROSPACE STANDARD PARTS |
| S.R. CEN/CLC/TR 14060:2014 | MEDICAL DEVICE TRACEABILITY ENABLED BY UNIQUE DEVICE IDENTIFICATION (UDI) |
| I.S. EN 1254-4:1998 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 4: FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS |
| PREN 15275 : DRAFT 2014 | STRUCTURAL ADHESIVES - CHARACTERISATION OF ANAEROBIC ADHESIVES FOR CO-AXIAL METALLIC ASSEMBLY IN BUILDING AND CIVIL ENGINEERING STRUCTURES |
| SAE AS 4959 : 2018 | BOLTS AND SCREWS, STEEL, UNS S66286 TENSILE STRENGTH 140 KSI 1650 DEGREES F SOLUTION HEAT TREATMENT AGED BEFORE FILLET AND THREAD ROLLING PROCUREMENT SPECIFICATION |
| BS EN 4649:2009 | Aerospace series. Handheld fire extinguishers with synthesis gases, for aircraft use. Technical specification and qualification conditions |
| BS EN ISO 9003:1994 | Quality systems. Model for quality assurance in final inspection and test |
| I.S. EN ISO 18797-1:2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS-POLYCHLOROPRENE OR EPDM (ISO 18797-1:2016) |
| CEI UNI EN 45510-3-1 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 3-1 - BOILERS - WATER TUBE BOILERS |
| IPC 9194 : 0 | IMPLEMENTATION OF STATISTICAL PROCESS CONTROL (SPC) APPLIED TO PRINTED BOARD ASSEMBLY MANUFACTURE GUIDELINE |
| CSA ISO/IEC 15426-1 : 2007 : R2012 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE VERIFIER CONFORMANCE SPECIFICATIONS - PART 1: LINEAR SYMBOLS |
| CEI UNI EN ISO/IEC 17040 : 2008 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PEER ASSESSMENT OF CONFORMITY ASSESSMENT BODIES AND ACCREDITATION BODIES |
| BS ISO 15348:2002 | Pipework. Metal bellows expansion joints. General |
| EIA 681 : 2015 STABILIZED | ASSESSMENT GUIDE FOR PROCESS CERTIFICATION |
| I.S. EN ISO 7396-1:2016 | MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM (ISO 7396-1:2016) |
| PREN 15014 : DRAFT 2014 | PLASTICS PIPING SYSTEMS - BURIED AND ABOVE GROUND PIPING COMPONENTS FOR WATER UNDER PRESSURE - REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR PIPES AND FITTINGS |
| BS IEC 61111:1992 | Matting of insulating material for electrical purposes |
| CSA ISO/IEC 12207 :2009 | SYSTEMS AND SOFTWARE ENGINEERING - SOFTWARE LIFE CYCLE PROCESSES |
| PREN 490 : DRAFT 2011 | CONCRETE ROOFING TILES AND FITTINGS FOR ROOF COVERING AND WALL CLADDING - PRODUCT SPECIFICATIONS |
| S.R. CEN/TR 16469:2013 | HYDROMETRY - MEASUREMENT OF THE RAINFALL INTENSITY (LIQUID PRECIPITATION): REQUIREMENTS, CALIBRATION METHODS AND FIELD MEASUREMENTS |
| I.S. EN 12966:2014 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS |
| PREN 14814 : DRAFT 2015 | ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS FOR FLUIDS UNDER PRESSURE - SPECIFICATIONS |
| PREN 14374 : DRAFT 2016 | TIMBER STRUCTURES - LAMINATED VENEER LUMBER (LVL) - REQUIREMENTS |
| PREN 9133 : 200P1 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - QUALIFICATION PROCEDURE FOR AEROSPACE STANDARD PRODUCTS |
| 05/30133277 DC : DRAFT MAY 2005 | |
| DD CEN/TS 12201-7:2003 | Plastics piping systems for water supply. Polyethylene (PE) Guidance for the assessment of conformity |
| ABS 0242 : 2018 | GUIDANCE NOTES ON USING UNMANNED AERIAL VEHICLES |
| PREN 12150-2 : DRAFT 2017 | GLASS IN BUILDING - THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 2: PRODUCT STANDARD |
| SAE AS 6174 : 2014 | COUNTERFEIT MATERIEL - ASSURING ACQUISITION OF AUTHENTIC AND CONFORMING MATERIEL |
| I.S. EN 1254-1:1998 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 1: FITTINGS WITH ENDS FOR CAPILLARY SOLDERING OR CAPILLARY BRAZING TO COPPER TUBES |
| I.S. EN 14055:2010 | WC AND URINAL FLUSHING CISTERNS |
| I.S. EN 16034:2014 | PEDESTRIAN DOORSETS, INDUSTRIAL, COMMERCIAL, GARAGE DOORS AND OPENABLE WINDOWS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS |
| CAN/CSA-ISO/IEC 25010:12 (R2016) | Systems and software engineering - Systems and software quality requirements and evaluation (SQuaRE) - System and software quality models (Adopted ISO/IEC 25010:2011, first edition, 2011-03-01) |
| AAMI ISO 11140-4 : 2007 : R2012 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 4: CLASS 2 INDICATORS AS AN ALTERNATIVE TO THE BOWIE AND DICK-TYPE TEST FOR DETECTION OF STEAM PENETRATION |
| EN 12449:2016 | Copper and copper alloys - Seamless, round tubes for general purposes |
| CSA ISO/IEC 10967-2 :2002 | INFORMATION TECHNOLOGY - LANGUAGE INDEPENDENT ARITHMETIC - PART 2: ELEMENTARY NUMERICAL FUNCTIONS |
| API 9A : 2011 : INC : ERR 1 : 2012 | SPECIFICATION FOR WIRE ROPE |
| PREN 12566-6 : DRAFT 2015 | SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 6: PREFABRICATED TREATMENT UNITS FOR SEPTIC TANK EFFLUENT |
| CLC/TS 50502:2008 | Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and connection systems |
| UNI ISO 18091 : 2014 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR THE APPLICATION OF ISO 9001:2008 IN LOCAL GOVERNMENT |
| PREN 492 : DRAFT 2010 | FIBRE-CEMENT SLATES AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS |
| UNI CEI EN ISO/IEC 17021 : 2011 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS |
| BS EN ISO 11607-2 : 2006 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES |
| PREN 14783 : DRAFT 2012 | FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
| PREN 54-28 : DRAFT 2015 | FIRE DETECTION AND FIRE ALARM SYSTEM - PART 28: NON-RESETTABLE LINE-TYPE HEAT DETECTORS |
| ASTM F 1314 : 2018 : REDLINE | Standard Specification for Wrought Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910) |
| XP PREN 9100 : E2009 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE ORGANIZATIONS |
| UNI EN ISO 15175 : 2011 | SOIL QUALITY - CHARACTERIZATION OF SOIL RELATED TO GROUNDWATER PROTECTION |
| CSA ISO 50004 : 2015 | ENERGY MANAGEMENT SYSTEMS - GUIDANCE FOR THE IMPLEMENTATION, MAINTENANCE AND IMPROVEMENT OF AN ENERGY MANAGEMENT SYSTEM |
| UNI EN 15358 : 2011 | SOLID RECOVERED FUELS - QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THEIR APPLICATION TO THE PRODUCTION OF SOLID RECOVERED FUELS |
| UNI EN 15345 : 2008 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES |
| UNE-EN 62402:2011 | Obsolescence management - Application guide |
| UNI CEN/TR 1317-6 : 2012 | ROAD RESTRAINT SYSTEMS - PART 6: PEDESTRIAN RESTRAINT SYSTEM - PEDESTRIAN PARAPETS |
| UNI ISO 11462-1 : 2014 | GUIDELINES FOR IMPLEMENTATION OF STATISTICAL PROCESS CONTROL (SPC) - PART 1: ELEMENTS OF SPC |
| CSA ISO 10006 : 2003 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY MANAGEMENT IN PROJECTS |
| BS EN 60895:2003 | Live working. Conductive clothing for use at a nominal voltage up to 800 kV a.c. and ± 600 kV d.c. |
| CEI EN 62402 : 2008 | OBSOLESCENCE MANAGEMENT - APPLICATION GUIDE |
| UNE-EN 16114:2012 | Management consultancy services |
| I.S. EN 62366-1:2015 | MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
| ASTM F 1672 : 2014 : REDLINE | Standard Specification for Resurfacing Patellar Prosthesis |
| I.S. ISO 10003:2007 | QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR DISPUTE RESOLUTION EXTERNAL TO ORGANIZATIONS |
| IEEE DRAFT 1074 : 0 | DEVELOPING SOFTWARE LIFE CYCLE PROCESSES |
| UNE-EN 14399-1:2016 | High-strength structural bolting assemblies for preloading - Part 1: General requirements |
| XP PREN 9200 : 2002 XP | AEROSPACE SERIES - PROGRAMME MANAGEMENT - GUIDELINES FOR PROJECT MANAGEMENT SPECIFICATION |
| ASTM D 5330/D5330M : 2006 : R2012 | Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced |
| CSA ISO/IEC 15939 : 2008 (R2018) | SYSTEMS AND SOFTWARE ENGINEERING - MEASUREMENT PROCESS |
| CSA ISO/IEC 20000-1 : 2013 : R2017 | INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 1: SERVICE MANAGEMENT SYSTEM REQUIREMENTS |
| BS ISO/IEC 20000-3:2012 | Information technology. Service management Guidance on scope definition and applicability of ISO/IEC 20000-1 |
| IEC 61133:2016 | Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service |
| UNE-EN 14688:2016 | Sanitary appliances - Wash basins - Functional requirements and test methods |
| UNI CEN/TS 12666-2 : 2012 | PLASTICS PIPING SYSTEMS FOR NON- PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| S.R. CEN/TS 16555-1:2013 | INNOVATION MANAGEMENT - PART 1: INNOVATION MANAGEMENT SYSTEM |
| UNI EN 15927 : 2010 | SERVICES OFFERED BY HEARING AID PROFESSIONALS |
| I.S. EN 61511-1:2017 | FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - NORMATIVE (UON) - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND SOFTWARE REQUIREMENTS |
| I.S. EN 9104-003:2010 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 003: REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM (AQMS) AUDITOR TRAINING AND QUALIFICATION |
| UNI EN 15497 : 2014 | STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| BS ISO/IEC 14598-4:1999 | Information technology. Software production evaluation Process for acquirers |
| CSA Z17665-1 : 2009 : R2014 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CEI EN 61284 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS |
| PREN 1748-2-2 : DRAFT 2017 | GLASS IN BUILDING - SPECIAL BASIC PRODUCTS - GLASS CERAMICS - PART 2-2: PRODUCT STANDARD |
| PD CEN/TR 15276-2:2009 | Fixed firefighting systems. Condensed aerosol extinguishing systems Design, installation and maintenance |
| NFPA 2112 : 2018 | FLAME-RESISTANT GARMENTS FOR PROTECTION OF INDUSTRIAL PERSONNEL AGAINST FLASH FIRE |
| CSA Z662 PACKAGE : 2011 | CONSISTS OF Z662-11, OIL AND GAS PIPELINE SYSTEMS AND Z662.1-11, COMMENTARY ON CSA Z662-11, OIL AND GAS PIPELINE SYSTEMS |
| CSA N286.0.1 : 2014 | COMMENTARY ON N286-12, MANAGEMENT SYSTEM REQUIREMENTS FOR NUCLEAR FACILITIES |
| ISO/TS 19930:2017 | Guidance on aspects of a risk-based approach to assuring sterility of terminally sterilized, single-use health care product that is unable to withstand processing to achieve maximally a sterility assurance level of 10-6 |
| UNI EN 13924-2 : 2014 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 2: MULTIGRADE PAVING GRADE BITUMENS |
| I.S. EN ISO 12944-1:2017 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 1: GENERAL INTRODUCTION (ISO 12944-1:2017) |
| IEEE C37.100.1-2007 | IEEE Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V |
| UNI EN 15964 : 2011 | BREATH ALCOHOL TEST DEVICES OTHER THAN SINGLE USE DEVICES - REQUIREMENTS AND TEST METHODS |
| PREN 9320 : DRAFT 2013 | AEROSPACE SERIES - PROGRAMME MANAGEMENT - GENERAL GUIDELINES FOR ACQUISITION AND SUPPLY OF OPEN SYSTEMS |
| EN 14428:2015 | Shower enclosures - Functional requirements and test methods |
| ISO/IEC Guide 53:2005 | Conformity assessment Guidance on the use of an organization's quality management system in product certification |
| ISO 11607-1:2006 | Packaging for terminally sterilized medical devices Part 1: Requirements for materials, sterile barrier systems and packaging systems |
| BS ISO 10001:2007 | Quality management. Customer satisfaction. Guidelines for codes of conduct for organizations |
| PREN 13813 : DRAFT 2017 | SCREED MATERIAL AND FLOOR SCREEDS - SCREED MATERIAL - PROPERTIES AND REQUIREMENTS |
| ISO 26262-1:2011 | Road vehicles Functional safety Part 1: Vocabulary |
| UNE-EN ISO 13408-6:2011 | Aseptic processing of health care products - Part 6: Isolator systems (ISO 13408-6:2005) |
| CAN/CSA-C22.2 NO. 61511-1:17 | Functional safety — Safety instrumented systems for the process industry sector — Part 1: Framework, definitions, system, hardware and application programming requirements (Adopted IEC 61511-1:2016, second edition, 2016-02, with Canadian deviations) | Sécurité fonctionnelle — Systèmes instrumentes de sécurité pour le secteur des industries de transformation — Partie 1 : Cadre, définitions, exigences pour le système, le matériel et la programmation d’application (norme IEC 61511-1:2016 adoptée, deuxième édition, 2016-02, avec exigences propres au Canada) |
| EN 15927:2010 | Services offered by hearing aid professionals |
| I.S. EN 16397-2:2014 | FLEXIBLE COUPLINGS - PART 2: CHARACTERISTICS AND TESTING FOR METAL BANDED FLEXIBLE COUPLINGS, ADAPTORS AND BUSHES |
| S.R. CEN/TS 1452-7:2014 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| UNE-IEC 60092-306:2010 | Electrical installations in ships - Part 306: Equipment - Luminaires and lighting accessories |
| UNE-EN 50598-3:2015 | Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Part 3: Quantitative eco design approach through life cycle assessment including product category rules and the content of environmental declarations |
| CSA/ANSI PRD 1 : 2013(R2018) | PRESSURE RELIEF DEVICES FOR NATURAL GAS VEHICLE (NGV) FUEL CONTAINERS |
| S.R. CWA 15833:2008 | HUMANITARIAN MINE ACTION - QUALITY MANAGEMENT - QUALITY ASSURANCE (QA) AND QUALITY CONTROL (QC) FOR MECHANICAL DEMINING |
| CSA Z24511 : 2010 : R2014 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE MANAGEMENT OF WASTEWATER UTILITIES AND FOR THE ASSESSMENT OF WASTEWATER SERVICES |
| BS EN 61264:1999 | Ceramic pressurized hollow insulators for high-voltage switchgear and controlgear |
| API SPEC 9A : 2011 | SPECIFICATION FOR WIRE ROPE |
| I.S. EN 13055:2016 | LIGHTWEIGHT AGGREGATES |
| DIN EN 16475-7:2016-05 | CHIMNEYS - ACCESSORIES - PART 7: RAIN CAPS - REQUIREMENTS AND TEST METHODS |
| 16/30338132 DC : 0 | BS EN 15399 - GAS INFRASTRUCTURE - SAFETY MANAGEMENT SYSTEMS FOR GAS NETWORKS WITH MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR |
| IEC TS 62600-2:2016 | Marine energy - Wave, tidal and other water current converters - Part 2: Design requirements for marine energy systems |
| BS EN ISO 13408-1:2015 | Aseptic processing of health care products General requirements |
| CEI EN 61325 : 1998 | INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| CEI EN 61854 : 2000 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| S.R. CWA 16275:2011 | GUIDELINES FOR THE SELECTION OF CONSULTANTS ADVISING SMES ON INTEGRATED QUALITY, ENVIRONMENT, HEALTH AND SAFETY MANAGEMENT SYSTEMS |
| CSA ISO 50001 : 2011 : R2016 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| I.S. EN 60903:2003 | LIVE WORKING - GLOVES OF INSULATING MATERIAL |
| EN 50126-1:2017 | Railway Applications - The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) - Part 1: Generic RAMS Process |
| BS EN ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories |
| CSA 12.3 : 2014 | FUEL SYSTEM COMPONENTS FOR COMPRESSED NATURAL GAS POWERED VEHICLES |
| I.S. EN 14081-1:2016 | TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 1: GENERAL REQUIREMENTS |
| CSA C61400-2 : 2008 : R2018 | WIND TURBINES - PART 2: DESIGN REQUIREMENTS FOR SMALL WIND TURBINES |
| S.R. CEN TR 15419:2006 | PROTECTIVE CLOTHING - GUIDELINES FOR SELECTION, USE, CARE AND MAINTENANCE OF CHEMICAL PROTECTIVE CLOTHING |
| BS EN 13369:2013 | Common rules for precast concrete products |
| BS EN 14592 : 2008 | TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
| I.S. EN 16887:2017 | LEATHER - ENVIRONMENTAL FOOTPRINT - PRODUCT CATEGORY RULES (PCR) - CARBON FOOTPRINTS |
| I.S. EN 10223-8:2013 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS |
| I.S. EN 61897:1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS |
| I.S. EN ISO/IEC 17065:2012 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES CERTIFYING PRODUCTS, PROCESSES AND SERVICES (ISO/IEC 17065:2012) |
| NF EN 50483-1 : 2009 | TEST REQUIREMENTS FOR LOW VOLTAGE AERIAL BUNDLED CABLE ACCESSORIES - PART 1: GENERALITIES |
| I.S. EN ISO 13127:2012 | PACKAGING - CHILD RESISTANT PACKAGING - MECHANICAL TEST METHODS FOR RECLOSABLE CHILD RESISTANT PACKAGING SYSTEMS (ISO 13127:2012) |
| ISO/TS 14033:2012 | Environmental management Quantitative environmental information Guidelines and examples |
| I.S. EN 16280:2012 | BREATH ALCOHOL TEST DEVICES FOR GENERAL PUBLIC - REQUIREMENTS AND TEST METHODS |
| PREN 14662-3 : DRAFT 2013 | AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF BENZENE CONCENTRATIONS - PART 3: AUTOMATED PUMPED SAMPLING WITH IN SITU GAS CHROMATOGRAPHY |
| AAMI ISO 11737-2 : 2009 : R2014 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
| I.S. EN ISO 9003:1994 | QUALITY SYSTEMS - MODEL FOR QUALITY ASSURANCE IN FINAL INSPECTION AND TEST |
| I.S. EN 4130:2009 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| I.S. EN 54-23:2010 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 23: FIRE ALARM DEVICES - VISUAL ALARM DEVICES |
| S.R. CEN/TS 14632:2012 | PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| CEN/TS 1456-2:2003 | Plastics piping systems for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity |
| ISO 21138-3:2007 | Plastics piping systems for non-pressure underground drainage and sewerage Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 3: Pipes and fittings with non-smooth external surface, Type B |
| I.S. EN 13476-3:2007 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY (VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INTERNAL AND PROFILED EXTERNAL SURFACE AND THE SYSTEM, TYPE B |
| BS EN 61496-1:2013 | Safety of machinery. Electro-sensitive protective equipment General requirements and tests |
| BS EN 15814 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS |
| AAMI ISO 11737-2 :2009 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
| ISO 4633:2015 | Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials |
| I.S. EN 15530:2008 | ALUMINIUM AND ALUMINIUM ALLOYS - ENVIRONMENTAL ASPECTS OF ALUMINIUM PRODUCTS - GENERAL GUIDELINES FOR THEIR INCLUSION IN STANDARDS |
| ISO 18400-103:2017 | Soil quality — Sampling — Part 103: Safety |
| AUIDP 1 : A2016 | NATO GUIDANCE ON UNIQUE IDENTIFICATION OF ITEMS |
| BS EN 16361 : 2013 | POWER OPERATED PEDESTRIAN DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PEDESTRIAN DOORSETS, OTHER THAN SWING TYPE, INITIALLY DESIGNED FOR INSTALLATION WITH POWER OPERATION |
| I.S. EN 15048-1:2016 | NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 13369:2013 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| I.S. EN 1457-2:2012 | CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 2: FLUE LINERS OPERATING UNDER WET CONDITIONS - REQUIREMENTS AND TEST METHODS |
| EN ISO 50001:2011 | Energy management systems - Requirements with guidance for use (ISO 50001:2011) |
| I.S. ISO 10001:2007 | QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR CODES OF CONDUCT FOR ORGANIZATIONS |
| I.S. EN 14423:2013 | CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR |
| CGSB-43.146 : 2002 | DESIGN, MANUFACTURE AND USE OF INTERMEDIATE BULK CONTAINERS FOR THE TRANSPORTATION OF DANGEROUS GOODS |
| UNE-EN 124-6:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) |
| DIN EN 15681-2:2015-07 (Draft) | GLASS IN BUILDING - BASIC ALUMINO SILICATE GLASS PRODUCTS - PART 2: PRODUCT STANDARD |
| ISO 25119-3:2010 | Tractors and machinery for agriculture and forestry Safety-related parts of control systems Part 3: Series development, hardware and software |
| ISO/IEC 17007:2009 | Conformity assessment — Guidance for drafting normative documents suitable for use for conformity assessment |
| I.S. EN 50239:2018 | RAILWAY APPLICATIONS - RADIO REMOTE CONTROL SYSTEM OF TRACTION VEHICLE FOR SHUNTING APPLICATION |
| ISO 15790:2004 | Graphic technology and photography — Certified reference materials for reflection and transmission metrology — Documentation and procedures for use, including determination of combined standard uncertainty |
| UNE-EN 14891:2017 | Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, assessment and verification of constancy of performance, classification and marking |
| CEN/TR 15276-2:2009 | Fixed firefighting systems - Condensed aerosol extinguishing systems - Part 2: Design, installation and maintenance |
| ISO 37500:2014 | Guidance on outsourcing |
| CEI UNI EN 12966-3 : 2009 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 3: FACTORY PRODUCTION CONTROL |
| PREN 1852-1 : DRAFT 2016 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| AAMI ISO 11607-2:2006 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING, AND ASSEMBLY PROCESSES |
| PREN 13407 : DRAFT 2014 | WALL-HUNG URINALS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| PREN 13256 : DRAFT 2015 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF TUNNELS AND UNDERGROUND STRUCTURES |
| ISO 16003:2008 | Components for fire-extinguishing systems using gas— Requirements and test methods — Container valve assemblies and their actuators; selector valves and their actuators; nozzles; flexible and rigid connectors; and check valves and non-return valves |
| ISO 17712:2013 | Freight containers — Mechanical seals |
| AEDP-6 : 2014 | NATO ADVANCED DATA STORAGE INTERFACE REQUIREMENTS AND IMPLEMENTATION GUIDE |
| ISO 9125:2009 | Fibre-cement slates and fittings Product specification and test methods |
| ISO 9002:1994 | Quality systems — Model for quality assurance in production, installation and servicing |
| ISO/IEC Guide 25:1990 | General requirements for the competence of calibration and testing laboratories |
| ISO 10418:2003 | Petroleum and natural gas industries Offshore production installations Analysis, design, installation and testing of basic surface process safety systems |
| CSA IEC 62366-1 : 2015 | MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
| ISO 10464:2004 | Gas cylinders — Refillable welded steel cylinders for liquefied petroleum gas (LPG) — Periodic inspection and testing |
| PREN ISO 15189 : DRAFT 2011 | MEDICAL LABORATORIES - PARTICULAR REQUIREMENTS FOR QUALITY AND COMPETENCE |
| BS EN ISO 3183 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| BS EN 12449:2016 | Copper and copper alloys. Seamless, round tubes for general purposes |
| ISO 19281:2016 | Air cargo Fire resistant containers Design, performance and testing requirements |
| I.S. EN 54-5:2017 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 5: HEAT DETECTORS - POINT HEAT DETECTORS |
| I.S. EN 13616-1:2016 | OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS -PART 1: OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE |
| ANSI/AAMI ST15883-1:2009(R2014) &A1:2014&A2:2012 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| I.S. EN 16855-1:2017 | WALK-IN COLD ROOMS - DEFINITION, THERMAL INSULATION PERFORMANCE AND TEST METHODS - PART 1: PREFABRICATED COLD ROOM KITS |
| I.S. EN 50341-1:2012 | OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS |
| ISO/IEC TS 24748-1:2016 | Systems and software engineering Life cycle management Part 1: Guidelines for life cycle management |
| CSA ISO 10012-2 : 0 | QUALITY ASSURANCE FOR MEASURING EQUIPMENT - GUIDELINES FOR CONTROL OF MEASUREMENT PROCESSES |
| UNI CEN/TS 1329-2 : 2012 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| I.S. EN 14188-4:2009 | JOINT FILLERS AND SEALANTS - PART 4: SPECIFICATIONS FOR PRIMERS TO BE USED WITH JOINT SEALANTS |
| S.R. CEN TR 15276-1:2009 | FIXED FIREFIGHTING SYSTEMS - CONDENSED AEROSOL EXTINGUISHING SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| UNI EN ISO 14006 : 2011 | ENVIRONMENTAL MANAGEMENT SYSTEMS - GUIDELINES FOR INCORPORATING ECODESIGN |
| ISO 13304-1:2013 | Radiological protection Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation Part 1: General principles |
| DD CEN/TS 1456-2:2003 | Plastic piping systems for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
| IEC 63004:2015 | Standard for receiver fixture interface |
| CEN ISO/TR 25108:2006 | Non-destructive testing - Guidelines for NDT personnel training organizations (ISO/TR 25108:2006) |
| I.S. EN 15814:2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS |
| I.S. EN 12764:2015 | SANITARY APPLIANCES - SPECIFICATION FOR WHIRLPOOL BATHS |
| 13/30277397 DC : 0 | BS EN 54-11 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 11: MANUAL CALL POINTS |
| CEN ISO/TS 22391-7:2011 | Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 7: Guidance for the assessment of conformity (ISO/TS 22391-7:2011) |
| DIN EN 54-7:2015-07 (Draft) | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 7: SMOKE DETECTORS - POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION |
| UNI CEI ISO/IEC TS 17021-3 : 2013 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEM |
| UNE-EN 15927:2011 | Services offered by hearing aid professionals |
| I.S. EN 16309:2014 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
| XP ISO/TS 22163 : 2017 XP | RAILWAY APPLICATIONS - QUALITY MANAGEMENT SYSTEM - BUSINESS MANAGEMENT SYSTEM REQUIREMENTS FOR RAIL ORGANIZATIONS: ISO 9001:2015 AND PARTICULAR REQUIREMENTS FOR APPLICATION IN THE RAIL SECTOR |
| I.S. ISO 14004:2005 | ENVIRONMENTAL MANAGEMENT SYSTEMS - GENERAL GUIDELINES ON PRINCIPLES, SYSTEMS AND SUPPORTING TECHNIQUES |
| I.S. EN 16361:2013 | POWER OPERATED PEDESTRIAN DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PEDESTRIAN DOORSETS, OTHER THAN SWING TYPE, INITIALLY DESIGNED FOR INSTALLATION WITH POWER OPERATION |
| 15/30319715 DC : 0 | BS EN 1279-5 - GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY |
| PREN 752 : DRAFT 2015 | DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - SEWER SYSTEM MANAGEMENT |
| BS EN 13674-4 : 2006 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| ISO/TS 15875-7:2003 | Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 7: Guidance for the assessment of conformity |
| AAMI ST15883-1 : 2009 : INC : AMD 1 : 2014 : R201400 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| BS EN 16993:2018 | Geosynthetic barriers. Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids |
| S.R. CEN/TR 16478:2012 | SURVEILLANCE FROM FIRST COMMISSIONING ON MEASURING DEVICES USED IN NATURAL GAS SUPPLY TO THE INSTALLATIONS OF THE ACTIVITIES UNDER THE DIRECTIVE 2003/87/EC ESTABLISHING A SCHEME OF CO[2] EMISSIONS TRADING |
| BS ISO/IEC/IEEE 15289:2019 | Systems and software engineering. Content of life-cycle information items (documentation) |
| EN 50239:2018 | Railway applications - Radio remote control system of traction vehicle for shunting application |
| ISO/IEC TR 17026:2015 | Conformity assessment Example of a certification scheme for tangible products |
| PREN 54-2 : DRAFT 2016 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT |
| PREN 15348 : DRAFT 2013 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(ETHYLENE TEREPHTHALATE) (PET) RECYCLATES |
| CEI UNI EN ISO/IEC 17065 : 2012 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES CERTIFYING PRODUCTS, PROCESSES AND SERVICES |
| IECQ 03-3:2013 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PROCEDURE - PART 3: IECQ APPROVED COMPONENT PRODUCTS, RELATED MATERIALS & ASSEMBLIES SCHEME |
| CAN/CSA-ISO/IEC 16350:16 | Information technology Systems and software engineering Application management (Adopted ISO/IEC 16350:2015, first edition, 2015-08-01) |
| PREN 12080 : DRAFT 2015 | RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| BS EN 50129:2003 | Railway applications. Communication, signalling and processing systems. Safety related electronic systems for signalling |
| BS ISO 10002:2014 | Quality management. Customer satisfaction. Guidelines for complaints handling in organizations |
| ISO 27914:2017 | Carbon dioxide capture, transportation and geological storage Geological storage |
| UNE-ISO 30301:2011 | Information and documentation. Management system for records. Requirements. |
| NF EN 61400-1 : 2006 AMD 1 2015 | WIND TURBINES - PART 1: DESIGN REQUIREMENTS |
| PREN 14449 : DRAFT 2017 | GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - PRODUCT STANDARD |
| ASTM F 3056 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
| BS EN 997 : 2012 | WC PANS AND WC SUITES WITH INTEGRAL TRAP |
| I.S. EN 15682-2:2013 | GLASS IN BUILDING - HEAT SOAKED THERMALLY TOUGHENED ALKALINE EARTH SILICATE SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD |
| NF EN 61189-5 : 2008 | TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5: TEST METHODS FOR PRINTED BOARD ASSEMBLIES |
| BS EN ISO 22301:2014 | Societal security. Business continuity management systems. Requirements |
| EN 13674-4:2006+A1:2009 | Railway applications - Track - Rail - Part 4: Vignole railway rails from 27 kg/m to, but excluding 46 kg/m |
| SAE AS 6332 : 2017 | AIRCRAFT GROUND DEICING/ANTI-ICING QUALITY MANAGEMENT |
| NFPA 1992 : 2018 | LIQUID SPLASH-PROTECTIVE ENSEMBLES AND CLOTHING FOR HAZARDOUS MATERIALS EMERGENCIES |
| ASTM F 1173 : 2001 : R2012 | Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications |
| TR 101 075 : 4.2.0 | DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2); BASE STATION AND ANCILLARY EQUIPMENT; PHYSICAL AND ELECTRICAL PARAMETERS; APPLICATION OF STANDARDS AND GUIDANCE NOTES (GSM 11.22 VERSION 4.2.0) |
| ASTM F 3056 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
| ASTM F 1586 : 2013 : EDT 1 | Standard Specification for Wrought Nitrogen Strengthened 21Chromium-10Nickel-3Manganese-2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675) |
| PREN 50575 : DRAFT 2012 | POWER, CONTROL AND COMMUNICATION CABLES - CABLES FOR GENERAL APPLICATIONS IN CONSTRUCTION WORKS SUBJECT TO REACTION TO FIRE REQUIREMENTS |
| SAE AS 7200/1 : 2017 | NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) - AUDIT AND INSPECTION PROCEDURES AND CHECKLISTS FOR THE SEALANT MANUFACTURERS ACCREDITATION PROGRAM |
| UNE-EN 14846:2010 | Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods |
| CEI UNI EN 45510-8-1 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 8-1: CONTROL AND INSTRUMENTATION |
| ASTM F 620 : 2011 : R2015 | Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition |
| UNE-EN 10088-4:2010 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| UNI ISO TS 16949 : 2009 | QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS |
| ASTM D 5486/D5486M : 2006 | Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing |
| ASTM E 2066 : 2000 | Standard Guide for Validation of Laboratory Information Management Systems |
| CSA ISO 10011-1 : 1994 | GUIDELINES FOR AUDITING QUALITY SYSTEMS - PART 1: AUDITING |
| I.S. EN 2786:2008 | AEROSPACE SERIES - ELECTROLYTIC SILVER PLATING OF FASTENERS |
| UNI EN 12082 : 2011 | RAILWAY APPLICATIONS - AXLEBOXES - PERFORMANCE TESTING |
| ASTM F 2070 : 2000 : R2017 | Standard Specification for Transducers, Pressure and Differential, Pressure, Electrical and Fiber-Optic |
| DIN EN ISO 3691-6:2014-06 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 6: BURDEN AND PERSONNEL CARRIERS (ISO 3691-6:2013) |
| ASTM E 1864 : 2002 | Standard Practice for Evaluating Quality Systems of Organizations Conducting Facility and Hazard Assessments for Lead in Paint, Dust, Airborne Particulate, and Soil in and around Buildings and Related Structures (Withdrawn 2011) |
| ASTM E 1884 : 1997 | Standard Guide for General Requirements for Bodies Operating Assessment and Certification/Registration of Quality Systems (Withdrawn 2004) |
| S.R. CEN/TS 16919:2016 | POSTAL SERVICES - INTERFACE AND DATA TRANSFER FORMAT FOR CAPTURING POSTAL AUTOMATION EVENTS IDT-PAE |
| ASTM F 3055 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
| EN 12467:2012+A2:2018 | Fibre-cement flat sheets - Product specification and test methods |
| S.R. CEN/TS 45545-2:2009 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| ISO 15541:2016 | Ships and marine technology — Fire resistance of non-metallic hose assemblies and non-metallic compensators — Requirements for the test bench |
| EN 14636-1:2009 | Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC) - Part 1: Pipes and fittings with flexible joints |
| EN 13565-1:2003+A1:2007 | Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components |
| BS EN 1329-1 : 2014 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| EN 1852-1:2018 | Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system |
| BS EN 12845:2015 | Fixed firefighting systems. Automatic sprinkler systems. Design, installation and maintenance |
| EN 1096-4:2004 | Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard |
| EN 60987:2015 | Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems |
| EN 14535-2:2011 | Railway applications - Brake discs for railway rolling stock - Part 2: Brake discs mounted onto the wheel, dimensions and quality requirements |
| I.S. EN 556-1:2002 | STERILISATION OF MEDICAL DEVICES - REQUIREMENTS FOR MEDICAL DEVICES TO BE DESIGNATED STERILE - PART 1: REQUIREMENTS FOR TERMINALLY STERILISED MEDICAL DEVICES |
| EN 14236:2007 | Ultrasonic domestic gas meters |
| CEN/TR 15419:2017 | Protective clothing - Guidelines for selection, use, care and maintenance of chemical protective clothing |
| I.S. EN 14811:2006 | RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
| ISO 18611-3:2014 | Ships and marine technology Marine NOx reduction agent AUS 40 Part 3: Handling, transportation and storage |
| IECQ 001002-5:2008 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SCHEME) RULES OF PROCEDURE - PART 5: HAZARDOUS SUBSTANCE PROCESS MANAGEMENT REQUIREMENTS (IECQ HSPM) |
| EN 12164:2016 | Copper and copper alloys - Rod for free machining purposes |
| IEC 62425:2007 | Railway applications - Communication, signalling and processing systems - Safety related electronic systems for signalling |
| I.S. EN 50206-1:2010 | RAILWAY APPLICATIONS - ROLLING STOCK - PANTOGRAPHS: CHARACTERISTICS AND TESTS - PART 1: PANTOGRAPHS FOR MAIN LINE VEHICLES |
| I.S. EN 61190-1-3:2007 | ATTACHMENT MATERIALS FOR ELECTRONIC ASSEMBLY - PART 1-3: REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDERS FOR ELECTRONIC SOLDERING APPLICATIONS |
| IEC TR 61258:2008 | Guidelines for the development and use of medical electrical equipment educational materials |
| EN 62430:2009 | Environmentally conscious design for electrical and electronic products |
| DIN EN 197-2:2014-05 | CEMENT - PART 2: CONFORMITY EVALUATION |
| UNE-EN 12952-6:2012 | Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler |
| GEIA STD 0016 : 2012 | PREPARING A DMSMS MANAGEMENT PLAN |
| I.S. EN ISO/IEC 17040:2005 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PEER ASSESSMENT OF CONFORMITY ASSESSMENT BODIES AND ACCREDITATION BODIES |
| ISO 4344:2004 | Steel wire ropes for lifts — Minimum requirements |
| I.S. EN 50128:2011 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SOFTWARE FOR RAILWAY CONTROL AND PROTECTION SYSTEMS |
| DIN EN ISO 22442-2:2016-05 | Medical devices utilizing animal tissues and their derivatives - Part 2: Controls on sourcing, collection and handling (ISO 22442-2:2015) |
| ISO 16813:2006 | Building environment design — Indoor environment — General principles |
| ISO/TR 13352:1997 | Guidelines for interpretation of ISO 9000 series for application within the iron ore industry |
| IECQ 03-8:2015 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PROCEDURE - PART 8: IECQ SCHEME FOR LED LIGHTING |
| EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
| ISO/IEC 15288:2008 | Systems and software engineering — System life cycle processes |
| EN ISO 14937:2009 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
| I.S. EN 1330-1:2014&LC:2015 | NON DESTRUCTIVE TESTING - TERMINOLOGY - PART 1: LIST OF GENERAL TERMS |
| EN 9100:2009 | Quality Management Systems - Requirements for Aviation, Space and Defense Organizations |
| IEC 61156-1-1:2001 | Multicore and symmetrical pair/quad cables for digital communications - Part 1-1: Capability Approval - Generic specification |
| IEC TR 61850-1:2013 | Communication networks and systems for power utility automation - Part 1: Introduction and overview |
| DIN EN 13850:2013-04 | POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF THE TRANSIT TIME OF END-TO-END SERVICES FOR SINGLE PIECE PRIORITY MAIL AND FIRST CLASS MAIL |
| EN 1982:2017 | Copper and copper alloys - Ingots and castings |
| IECQ 03-3-1:2013 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PROCEDURE - PART 3-1: IECQ APPROVED COMPONENT PRODUCTS, RELATED MATERIALS & ASSEMBLIES SCHEME, IECQ APPROVED COMPONENT-TECHNOLOGY CERTIFICATION (IECQ AC-TC) |
| DIN EN 1804-1:2010-05 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements (includes Amendment A1:2010) |
| DIN EN 877:2010-01 | Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance (includes Amendment A1:2006 and Corrigendum AC:2008) |
| UNE-EN 54-3:2016 | Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders |
| DIN EN 1804-2:2010-05 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams (includes Amendment A1:2010) |
| IEC TS 62239:2008 | Process management for avionics - Preparation of an electronic components management plan |
| EN 12168:2016 | Copper and copper alloys - Hollow rod for free machining purposes |
| DIN EN 12899-1:2008-02 | FIXED VERTICAL ROAD TRAFFIC SIGNS - PART 1: FIXED SIGNS |
| DIN EN 13263-2:2009-07 | SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
| DIN EN 12839:2012-03 | PRECAST CONCRETE PRODUCTS - ELEMENTS FOR FENCES |
| DIN EN 12279:2005-12 | GAS SUPPLY SYSTEMS - GAS PRESSURE REGULATING INSTALLATIONS ON SERVICE LINES - FUNCTIONAL REQUIREMENTS |
| DIN EN 12337-2:2005-01 | Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard; German version EN 12337-2:2004 |
| DIN EN 12899-3:2008-02 | Fixed vertical road traffic signs - Part 3: Delineator posts and retroreflectors |
| DIN EN 13279-1:2008-11 | GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
| DIN EN 12101-6:2005-09 | Smoke and heat control systems - Part 6: Specification for pressure differential systems, Kits |
| DIN EN 556-2:2015-11 | STERILIZATION OF MEDICAL DEVICES - REQUIREMENTS FOR MEDICAL DEVICES TO BE DESIGNATED 'STERILE' - PART 2: REQUIREMENTS FOR ASEPTICALLY PROCESSED MEDICAL DEVICES |
| DIN EN 14350-2:2004-11 | CHILD USE AND CARE ARTICLES - DRINKING EQUIPMENT - PART 2: CHEMICAL REQUIREMENTS AND TESTS |
| DIN EN 1748-1-2:2005-01 | Glass in building - Special basic products - Borosilicate glasses - Part 1-2: Evaluation of conformity/Product standard |
| DIN EN 12809:2005-08 | Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods |
| DIN EN 1492-4:2009-02 | TEXTILE SLINGS - SAFETY - PART 4: LIFTING SLINGS FOR GENERAL SERVICE MADE FROM NATURAL AND MAN-MADE FIBRE ROPES |
| DIN EN 12890 : 2002-05 | FOUNDING - PATTERNS, PATTERN EQUIPMENT AND COREBOXES FOR THE PRODUCTION OF SAND MOULDS AND SAND CORES |
| DIN EN 14188-1:2004-12 | Joint fillers and sealants - Part 1: Specifications for hot applied sealants |
| DIN EN 13981-2:2004-10 | Aluminium and aluminium alloys - Products for structural railway applications, Technical conditions for inspection and delivery - Part 2: Plates and sheets |
| DIN EN 12101-1:2006-06 | Smoke and heat control systems - Part 1: Specification for smoke barriers |
| DIN EN 1344:2015-10 | CLAY PAVERS - REQUIREMENTS AND TEST METHODS |
| DIN EN 572-9:2005-01 | Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard |
| DIN EN 1319:2010-06 | DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN-ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW |
| DIN EN 13212:2011-12 | Road marking materials - Requirements for factory production control |
| DIN EN 12285-2:2005-05 | WORKSHOP FABRICATED STEEL TANKS - PART 2: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE ABOVEGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS |
| DIN EN 1916:2003-04 | CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED |
| DIN EN ISO 17665-1:2006-11 | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006) |
| DIN EN 12842:2012-11 | Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods |
| DIN EN 13084-7:2013-03 | FREE-STANDING CHIMNEYS - PART 7: PRODUCT SPECIFICATIONS OF CYLINDRICAL STEEL FABRICATIONS FOR USE IN SINGLE WALL STEEL CHIMNEYS AND STEEL LINERS |
| DIN EN 14350-1:2004-11 | CHILD USE AND CARE ARTICLES - DRINKING EQUIPMENT - PART 1: GENERAL AND MECHANICAL REQUIREMENTS AND TESTS |
| DIN EN 1748-2-2:2005-01 | Glass in building - Special basic products - Glass ceramics - Part 2-2: Evaluation of conformity/Product standard |
| DIN EN 14178-2:2005-01 | Glass in Building - Basic alkaline earth silicate glass products - Part 2: Evaluation of conformity/Product standard |
| DIN EN 12101-3:2015-12 | SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT CONTROL VENTILATORS (FANS) |
| DIN EN 1858:2016-08 (Draft) | CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS |
| DIN EN 13981-3:2006-12 | Aluminium and aluminium alloys - Products for structural railway applications, Technical conditions for inspection and delivery - Part 3: Castings |
| DIN EN 14408-1:2004-12 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 1: GENERAL |
| DIN EN 1917:2003-04 | CONCRETE MANHOLES AND INSPECTION CHAMBERS, UNREINFORCED, STEEL FIBRE AND REINFORCED |
| DIN EN 1594:2013-12 | Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements |
| DIN EN 1559-1:2011-05 | Founding - Technical conditions of delivery - Part 1: General |
| DIN EN 508-3:2009-07 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel |
| DIN EN 14625:2012-12 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF OZONE BY ULTRAVIOLET PHOTOMETRY |
| DIN EN 14964:2007-01 | RIGID UNDERLAYS FOR DISCONTINUOUS ROOFING - DEFINITIONS AND CHARACTERISTICS |
| DIN EN 15347:2008-02 | Plastics - Recycled Plastics - Characterisation of plastics wastes |
| DIN EN 13970:2005-02 | Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics |
| DIN EN 14211:2012-11 | Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence |
| DIN EN 1279-5:2015-08 (Draft) | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY |
| DIN EN 13986:2015-06 | WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| DIN EN 12081:2015-06 (Draft) | RAILWAY APPLICATIONS - AXLEBOXES - LUBRICATING GREASES |
| DIN EN 14449:2005-07 | Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard |
| DIN EN 1856-2:2009-09 | CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 2: METAL FLUE LINERS AND CONNECTING FLUE PIPES |
| DIN EN 14662-3:2016-02 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF BENZENE CONCENTRATIONS - PART 3: AUTOMATED PUMPED SAMPLING WITH IN SITU GAS CHROMATOGRAPHY |
| DIN EN 14342:2013-09 | Wood flooring - Characteristics, evaluation of conformity and marking |
| DIN EN 12167:2015-12 (Draft) | COPPER AND COPPER ALLOYS - PROFILES AND BARS FOR GENERAL PURPOSES |
| DIN EN 14814:2008-03 | ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS FOR FLUIDS UNDER PRESSURE - SPECIFICATIONS |
| DIN EN 15015:2008-01 | Plastics piping systems - Systems for hot and cold water not intended for human consumption - Performance characteristics for pipes, fittings and their joints |
| DIN EN 15317:2014-02 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC THICKNESS MEASURING EQUIPMENT |
| DIN EN 598:2009-10 | Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods (includes Amendment A1:2009) |
| DIN EN 1337-3:2005-07 | Structural bearings - Part 3: Elastomeric bearings |
| DIN EN 14604:2016-02 (Draft) | Smoke alarm devices; German and English version prEN 14604:2016 |
| DIN EN 12668-2:2010-06 | Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes |
| DIN EN 14246:2006-09 | Gypsum elements for suspended ceilings - Definitions, requirements and test methods |
| DIN EN 15266:2007-08 | Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar |
| DIN EN 14534:2014-08 (Draft) | POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF THE TRANSIT TIME OF END-TO-END SERVICES FOR BULK MAIL |
| DIN EN 12168:2015-12 (Draft) | COPPER AND COPPER ALLOYS - HOLLOW ROD FOR FREE MACHINING PURPOSES |
| DIN EN 12080:2015-06 (Draft) | RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| DIN EN 14716:2005-03 | Stretched ceilings - Requirements and tests methods; German version EN 14716:2004 |
| UNE-EN 13479:2018 | Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials |
| DIN EN 14372:2004-11 | CHILD USE AND CARE ARTICLES - CUTLERY AND FEEDING UTENSILS - SAFETY REQUIREMENTS AND TESTS |
| DIN EN 12165:2015-12 (Draft) | COPPER AND COPPER ALLOYS - WROUGHT AND UNWROUGHT FORGING STOCK |
| DIN EN 15344:2008-02 | Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates |
| DIN EN 14422:2013-09 | CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES |
| DIN EN 14782:2015-09 (Draft) | SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
| DIN EN 1337-6:2004-08 | Structural bearings - Part 6: Rocker bearings |
| DIN EN 14566:2009-10 | MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN 14250:2010-05 | Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners |
| DIN EN 14267:2004-10 | IRRIGATION TECHNIQUES - IRRIGATION HYDRANTS |
| DIN EN 14424:2013-09 | HOSE FITTINGS WITH SCREWED FERRULES |
| DIN EN 13771-1:2015-01 (Draft) | COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 1: REFRIGERANT COMPRESSORS |
| DIN EN 13771-2:2016-11 (Draft) | COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 2: CONDENSING UNITS |
| DIN EN 12164:2015-12 (Draft) | COPPER AND COPPER ALLOYS - ROD FOR FREE MACHINING PURPOSES |
| DIN EN 12326-1:2014-11 | SLATE AND STONE FOR DISCONTINUOUS ROOFING AND EXTERNAL CLADDING - PART 1: SPECIFICATIONS FOR SLATE AND CARBONATE SLATE |
| DIN EN 14626:2012-12 | Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy |
| DIN EN 14236:2008-06 | ULTRASONIC DOMESTIC GAS METERS |
| DIN EN 14384:2005-10 | PILLAR FIRE HYDRANTS |
| DIN EN 12163:2015-12 (Draft) | COPPER AND COPPER ALLOYS - ROD FOR GENERAL PURPOSES |
| DIN EN 1856-1:2009-09 | CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 1: SYSTEM CHIMNEY PRODUCTS |
| DIN EN 14496:2016-02 (Draft) | GYPSUM BASED ADHESIVES FOR THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS AND GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN 14359:2011-04 | GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
| DIN EN 14540:2014-09 | FIRE-FIGHTING HOSES - NON-PERCOLATING LAYFLAT HOSES FOR FIXED SYSTEMS |
| DIN EN 14339:2005-10 | UNDERGROUND FIRE HYDRANTS |
| DIN EN 15342:2008-02 | Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates |
| UNE-EN 13253:2017 | Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments) |
| BS EN 12450:2012 | Copper and copper alloys. Seamless, round copper capillary tubes |
| BS EN 14195:2014 | Metal framing components for gypsum board systems. Definitions, requirements and test methods |
| BS EN 556-2:2015 | Sterilization of medical devices. Requirements for medical devices to be designated \'STERILE\' Requirements for aseptically processed medical devices |
| BS EN 14211:2012 | Ambient air. Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence |
| UNE-EN 14662-3:2016 | Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography |
| BS EN 10312:2002 | Welded stainless steel tubes for the conveyance of aqueous liquids inclu ding water for human consumption. Technical delivery conditions |
| BS EN 544:2011 | Bitumen shingles with mineral and/or synthetic reinforcements. Product specification and test methods |
| UNE-EN ISO 17662:2016 | Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO 17662:2016) |
| UNE-EN 442-1:2015 | Radiators and convectors - Part 1: Technical specifications and requirements |
| BS EN 13347:2002 | Copper and copper alloys. Rod and wire for welding and braze welding |
| BS EN 14814:2016 | Adhesives for thermoplastic piping systems for fluids under pressure. Specifications |
| BS EN 14991:2007 | Precast concrete products. Foundation elements |
| BS EN 10242:1995 | Threaded pipe fittings in malleable cast iron |
| BS EN 12081:2017 | Railway applications - Axleboxes - Lubricating greases |
| BS EN ISO 16106:2006 | Packaging. Transport packages for dangerous goods. Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings. Guidelines for the application of ISO 9001 |
| BS EN ISO 11737-2:2009 | Sterilization of medical devices. Microbiological methods Tests of sterility performed in the definition, validation and maintenance of a sterilization process |
| BS EN 14532-1:2004 | Welding consumables. Test methods and quality requirements Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys |
| UNE-EN 14065:2017 | Textiles - Laundry processed textiles - Biocontamination control system |
| ISO 10002:2014 | Quality management Customer satisfaction Guidelines for complaints handling in organizations |
| BS EN 12326-1:2014 | Slate and stone for discontinuous roofing and external cladding Specifications for slate and carbonate slate |
| EN 54-22:2015 | Fire detection and fire alarm systems - Part 22: Resettable line-type heat detectors |
| BS EN 12163:2011 | Copper and copper alloys. Rod for general purposes |
| BS EN 598 : 2007 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| BS EN 334 : 2005 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| BS EN 1758:1998 | Copper and copper alloys. Strip for lead frames |
| DIN EN 14891:2015-02 (Draft) | LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, CLASSIFICATION AND MARKING |
| UNE-EN 12101-3:2016 | Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans) |
| BS EN ISO 14644-4:2001 | Cleanrooms and associated controlled environments Design, construction and start-up |
| ISO 10472-1:1997 | Safety requirements for industrial laundry machinery Part 1: Common requirements |
| BS EN 12884:1999 | Biotechnology. Performance criteria for centrifuges |
| BS EN 12885:1999 | Biotechnology. Performance criteria for cell disrupters |
| IEC 61189-5-4:2015 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-4: General test methods for materials and assemblies - Solder alloys and fluxed and non-fluxed solid wire for printed board assemblies |
| CSA HPIT 1 : 2015 | COMPRESSED HYDROGEN POWERED INDUSTRIAL TRUCK ON-BOARD FUEL STORAGE AND HANDLING COMPONENTS |
| BS EN 1504-8:2016 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and AVCP Quality control and Assessment and verification of the constancy of performance (AVCP) |
| UNE-EN 545:2011 | Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
| BS EN 1254-3:1998 | Copper and copper alloys. Plumbing fittings Fittings with compression ends for use with plastics pipes |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| BS EN 253 : 2009 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PIPE ASSEMBLY OF STEEL SERVICE PIPE, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| UNE-EN 12186:2015 | Gas infrastructure - Gas pressure regulating stations for transmission and distribution - Functional requirements |
| BS EN 12839:2012 | Precast concrete products. Elements for fences |
| BS EN 13380:2001 | General requirements for components used for renovation and repair of drain and sewer systems outside buildings |
| ISO 6789-1:2017 | Assembly tools for screws and nuts — Hand torque tools — Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance |
| DIN EN 15274:2015-06 | GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS |
| CSA HPIT 1:15 (R2020) | Compressed hydrogen powered industrial truck on-board fuel storage and handling components |
| BS EN 12368:2015 | Traffic control equipment. Signal heads |
| UNE-EN ISO 11980:2013 | Ophthalmic optics - Contact lenses and contact lens care products - Guidance for clinical investigations (ISO 11980:2012) |
| ISO/TS 29001:2010 | Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations |
| BS EN 15048-1:2007 | Non-preloaded structural bolting assemblies General requirements |
| UNE-EN 14909:2013 | Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics |
| EN 61854:1998 | Overhead lines - Requirements and tests for spacers |
| ISO 19859:2016 | Gas turbine applications Requirements for power generation |
| BS EN 14782:2006 | Self-supporting metal sheet for roofing, external cladding and internal lining. Product specification and requirements |
| BS EN 12080:2017 | Railway applications. Axleboxes. Rolling bearings |
| UNE-EN ISO 15189:2013 | Medical laboratories - Requirements for quality and competence (ISO 15189:2012, Corrected version 2014-08-15) |
| BS EN 295-2:2013 | Vitrified clay pipe systems for drains and sewers Evaluation of conformity and sampling |
| IEC 61069-8:2016 | Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 8: Assessment of other system properties |
| IEC 61191-2:2017 | Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies |
| BS EN 13148:2010 | Copper and copper alloys. Hot-dip tinned strip |
| BS EN 10224:2002 | Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids. Technical delivery conditions |
| BS EN 1401-1:2009 | Plastic piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U) Specifications for pipes, fittings and the system |
| DIN EN 14901:2014-12 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING (HEAVY DUTY) OF DUCTILE IRON FITTINGS AND ACCESSORIES - REQUIREMENTS AND TEST METHODS |
| BS EN 14969:2006 | Railway applications. Track. Qualification system for railway trackwork contractors |
| BS EN 13859-2:2014 | Flexible sheets for waterproofing. Definitions and characteristics of underlays Underlays for walls |
| BS EN 14716:2004 | Stretched ceilings. Requirements and test methods |
| BS EN 14516 : 2015 | BATHS FOR DOMESTIC PURPOSES |
| UNE-EN 14375:2016 | Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing |
| BS EN 1990:2002+A1:2005 | Eurocode. Basis of structural design |
| BS EN 1254-4:1998 | Copper and copper alloys. Plumbing fittings Fittings combining other end connections with capillary or compression ends |
| BS EN 14399-1:2015 | High-strength structural bolting assemblies for preloading General requirements |
| UNE-EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
| CEN/TS 1519-2:2012 | Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylen (PE) - Part 2: Guidance for the assessment of conformity |
| EN 16475-7:2016 | Chimneys - Accessories - Part 7: Rain caps - Requirements and test methods |
| IEC 61511-1:2016 RLV | Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements |
| ONORM B 2599-2 : 2011 | DUCTILE CAST IRON PIPES AND FITTINGS - PART 2: SPECIFICATIONS FOR JOINTS, SURFACE PROTECTION AND QUALITY ASSURANCE OF WASTE WATER PIPELINES |
| I.S. EN 50155:2017-11 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRONIC EQUIPMENT |
| I.S. EN 12158-1:2000 | BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS |
| I.S. EN 764-5:2014 | PRESSURE EQUIPMENT - PART 5: INSPECTION DOCUMENTATION OF METALLIC MATERIALS AND COMPLIANCE WITH THE MATERIAL SPECIFICATION |
| I.S. EN 15346:2014 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES |
| I.S. EN 13984:2013 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER VAPOUR CONTROL LAYERS - DEFINITIONS AND CHARACTERISTICS |
| I.S. EN 61191-4:2017 | PRINTED BOARD ASSEMBLIES - PART 4: SECTIONAL SPECIFICATION - REQUIREMENTS FOR TERMINAL SOLDERED ASSEMBLIES |
| I.S. EN 14351-1:2006 | WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 1: WINDOWS AND EXTERNAL PEDESTRIAN DOORSETS WITHOUT RESISTANCE TO FIRE AND/OR SMOKE LEAKAGE CHARACTERISTICS |
| I.S. EN 14023:2010 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR POLYMER MODIFIED BITUMENS |
| I.S. EN 1168:2005 | PRECAST CONCRETE PRODUCTS - HOLLOW CORE SLABS |
| I.S. EN 1858:2008 | CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS |
| I.S. EN 12450:2012 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER CAPILLARY TUBES |
| I.S. EN 14211:2012 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF NITROGEN DIOXIDE AND NITROGEN MONOXIDE BY CHEMILUMINESCENCE |
| I.S. EN ISO 10380:2012 | PIPEWORK - CORRUGATED METAL HOSES AND HOSE ASSEMBLIES (ISO 10380:2012) |
| I.S. EN 13481-5:2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 5: FASTENING SYSTEMS FOR SLAB TRACK WITH RAIL ON THE SURFACE OR RAIL EMBEDDED IN A CHANNEL |
| I.S. EN ISO 14534:2015 | OPHTHALMIC OPTICS - CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - FUNDAMENTAL REQUIREMENTS (ISO 14534:2011) |
| I.S. EN 12368:2015 | TRAFFIC CONTROL EQUIPMENT - SIGNAL HEADS |
| I.S. EN 13600:2013 | COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES |
| I.S. EN 13674-3:2006 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 3: CHECK RAILS |
| I.S. EN 12507:2005 | TRANSPORTATION SERVICES - GUIDANCE NOTES ON THE APPLICATION OF EN ISO 9001:2000 TO THE ROAD TRANSPORTATION, STORAGE, DISTRIBUTION AND RAILWAY GOODS INDUSTRIES |
| I.S. EN 12081:2017 | RAILWAY APPLICATIONS - AXLEBOXES - LUBRICATING GREASES |
| I.S. EN 546-1:2007 | ALUMINIUM AND ALUMINIUM ALLOYS - FOIL - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| I.S. EN 12385-1:2002 | STEEL WIRE ROPES - SAFETY - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 14508:2016 | POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF THE TRANSIT TIME OF END-TO-END SERVICES FOR SINGLE PIECE NON-PRIORITY MAIL AND SECOND CLASS MAIL |
| I.S. EN 12798:2007 | TRANSPORT QUALITY MANAGEMENT SYSTEM - ROAD, RAIL AND INLAND NAVIGATION TRANSPORT - QUALITY MANAGEMENT SYSTEM REQUIREMENTS TO SUPPLEMENT EN ISO 9001 FOR THE TRANSPORT OF DANGEROUS GOODS WITH REGARD TO SAFETY |
| I.S. EN 10223-3:2013 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES |
| I.S. EN 14540:2014 | FIRE-FIGHTING HOSES - NON-PERCOLATING LAYFLAT HOSES FOR FIXED SYSTEMS |
| I.S. EN 1594:2013 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS |
| DIN EN ISO-IEC 15416 E : 2002 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE PRINT QUALITY TEST SPECIFICATION - LINEAR SYMBOLS |
| I.S. EN 862:2016 | PACKAGING - CHILD-RESISTANT PACKAGING - REQUIREMENTS AND TESTING PROCEDURES FOR NON-RECLOSABLE PACKAGES FOR NON-PHARMACEUTICAL PRODUCTS |
| I.S. EN 13963:2014 | JOINTING MATERIALS FOR GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 12080:2017 | RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| I.S. EN 13481-3:2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 3: FASTENING SYSTEMS FOR WOOD SLEEPERS |
| I.S. EN 12166:2016 | COPPER AND COPPER ALLOYS - WIRE FOR GENERAL PURPOSES |
| I.S. EN 598:2007 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 14065:2016 | TEXTILES - LAUNDRY PROCESSED TEXTILES - BIOCONTAMINATION CONTROL SYSTEM |
| I.S. EN 1317-5:2007 | ROAD RESTRAINT SYSTEMS - PART 5: PRODUCT REQUIREMENTS AND EVALUATION OF CONFORMITY FOR VEHICLE RESTRAINT SYSTEMS |
| I.S. EN 13237:2012 | POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| UNI EN 1804-2 : 2010 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 2: POWER SET LEGS AND RAMS |
| I.S. EN 12842:2012 | DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS |
| DIN EN 13148:2010-12 | Copper and copper alloys - Hot-dip tinned strip |
| I.S. EN 969:2009 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 13859-1:2014 | FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 1: UNDERLAYS FOR DISCONTINUOUS ROOFING |
| DIN EN 74-1:2005-12 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures |
| I.S. EN ISO 14922-4:1999 | THERMAL SPRAYING - QUALITY REQUIREMENTS OF THERMALLY SPRAYED STRUCTURES - PART 4: ELEMENTARY QUALITY REQUIREMENTS |
| I.S. EN 13022-2:2014 | GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - PART 2: ASSEMBLY RULES |
| I.S. EN 534:2006 | CORRUGATED BITUMEN SHEETS - PRODUCT SPECIFICATION AND TEST METHODS |
| DIN EN 12450:2013-01 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER CAPILLARY TUBES |
| DIN EN 14420-1:2013-09 | Hose fittings with clamp units - Part 1: Requirements, types of fixing and connection, designation and testing |
| I.S. EN 2337:2006 | AEROSPACE SERIES - SPHERICAL PLAIN BEARINGS - TECHNICAL SPECIFICATION |
| I.S. EN ISO 14937:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. EN 13251:2016 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN EARTHWORKS, FOUNDATIONS AND RETAINING STRUCTURES |
| DIN EN ISO 7218:2014-09 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - GENERAL REQUIREMENTS AND GUIDANCE FOR MICROBIOLOGICAL EXAMINATIONS (ISO 7218:2007 + AMD 1:2013, CORRECTED VERSION 2014-04-15) |
| I.S. EN 13481-4:2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 4: FASTENING SYSTEMS FOR STEEL SLEEPERS |
| EN 508-1:2014 | Roofing and cladding products from metal sheet - Specification for self-supporting of steel, aluminium or stainless steel sheet - Part 1: Steel |
| I.S. EN 14496:2017 | GYPSUM BASED ADHESIVES FOR THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS AND GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 1982:2017 | COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS |
| EN 15512:2009 | Steel static storage systems - Adjustable pallet racking systems - Principles for structural design |
| I.S. EN 13249:2016 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF ROADS AND OTHER TRAFFICKED AREAS (EXCLUDING RAILWAYS AND ASPHALT INCLUSION) |
| I.S. EN 1423:2012 | ROAD MARKING MATERIALS - DROP ON MATERIALS - GLASS BEADS, ANTISKID AGGREGATES AND MIXTURES OF THE TWO |
| DIN EN 12451:2012-08 | Copper and copper alloys - Seamless, round tubes for heat exchangers |
| DIN EN 14409-1:2004-12 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 1: GENERAL |
| DIN EN 13674-1:2011-04 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| I.S. EN 295-2:2013 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING |
| DIN EN 13674-1:2017-07 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| DIN EN 1776:2016-05 | GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS |
| I.S. EN ISO 11140-1:2014 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS (ISO 11140-1:2014) |
| I.S. EN ISO 11140-3:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 3: CLASS 2 INDICATOR SYSTEMS FOR USE IN THE BOWIE AND DICK-TYPE STEAM PENETRATION TEST |
| I.S. EN 61191-3:2017 | PRINTED BOARD ASSEMBLIES - PART 3: SECTIONAL SPECIFICATION - REQUIREMENTS FOR THROUGH-HOLE MOUNT SOLDERED ASSEMBLIES |
| DIN EN ISO 11442:2006-06 | Technical product documentation - Document management (ISO 11442:2006) |
| I.S. EN 13063-2:2005 | CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 2: REQUIREMENTS AND TEST METHODS UNDER WET CONDITIONS |
| DIN EN ISO 3691-6:2017-02 | Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers (ISO 3691-6:2013); German version EN ISO 3691-6:2015 + AC:2016 |
| I.S. EN 179:2008 | BUILDING HARDWARE - EMERGENCY EXIT DEVICES OPERATED BY A LEVER HANDLE OR PUSH PAD, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 14209:2017 | PREFORMED PLASTERBOARD CORNICES - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 1947:2014 | FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES |
| I.S. EN 1806:2006 | CHIMNEYS - CLAY/CERAMIC FLUE BLOCKS FOR SINGLE WALL CHIMNEYS - REQUIREMENTS AND TEST METHODS |
| ONORM S 2081-1 : 2011 | LANDFILLS - SEALING SYSTEMS WITH GEOSYNTHETIC CLAY BARRIERS (GBR-C) - PART 1: REQUIREMENTS AND TESTS |
| DIN EN 1051-2:2007-12 | Glass in building - Glass blocks and glass pavers - Part 2: Evaluation of conformity/Product standard |
| I.S. EN 13256:2016 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS -CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF TUNNELS AND UNDERGROUND STRUCTURES |
| EN 1804-2:2001+A1:2010 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams |
| I.S. EN 2888:2006 | AEROSPACE SERIES - METRIC BOLTS, NORMAL HEXAGON HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 600 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| I.S. EN 4168:2005 | AEROSPACE SERIES - CLIPS, SPRING TENSION, THREE PARTS - OUTER CLIPS IN HEAT RESISTING STEEL FE-PA2601 (A286) |
| I.S. EN 13160-3:2016 | LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS |
| DIN EN 1057:2010-06 | Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications (includes Amendment A1:2010) |
| I.S. EN 14628:2005 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYETHYLENE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 13693:2005 | PRECAST CONCRETE PRODUCTS - SPECIAL ROOF ELEMENTS |
| I.S. EN 12952-6:2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 6: INSPECTION DURING CONSTRUCTION; DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER |
| I.S. EN 4167:2005 | AEROSPACE SERIES - CLIPS, SPRING TENSION, THREE PARTS - INNER CLIPS IN HEAT RESISTING STEEL FE-PA2601 (A286) |
| I.S. EN 13915:2017 | PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 13411-1:2002 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 1: THIMBLES FOR STEEL WIRE ROPE SLINGS |
| DIN EN 10210-1:2006-07 | Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
| I.S. EN 13599:2014 | COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES |
| I.S. EN ISO 3452-2:2013 | NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 2: TESTING OF PENETRANT MATERIALS (ISO 3452-2:2013) |
| I.S. EN 12167:2016 | COPPER AND COPPER ALLOYS - PROFILES AND BARS FOR GENERAL PURPOSES |
| I.S. EN 12953-2:2012 | SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| I.S. EN 331:2015 | MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
| I.S. EN 14909:2012 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF COURSES - DEFINITIONS AND CHARACTERISTICS |
| I.S. EN 13707:2013 | FLEXIBLE SHEETS FOR WATERPROOFING - REINFORCED BITUMEN SHEETS FOR ROOF WATERPROOFING - DEFINITIONS AND CHARACTERISTICS |
| DIN EN 12420:1999-03 | COPPER AND COPPER ALLOYS - FORGINGS |
| UNI EN 12668-1 : 2010 | NON-DESTRUCTIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC EXAMINATION EQUIPMENT - PART 1: INSTRUMENTS |
| DIN EN 13616:2004-09 | OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS |
| I.S. EN 1804-1:2002 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 1: SUPPORT UNITS AND GENERAL REQUIREMENTS |
| I.S. EN 10021:2006 | GENERAL TECHNICAL DELIVERY CONDITIONS FOR STEEL PRODUCTS |
| DIN EN 729-4:1994-11 | QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - PART 4: ELEMENTARY QUALITY REQUIREMENTS |
| I.S. EN 14783:2013 | FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
| I.S. EN 1790:2013 | ROAD MARKING MATERIALS - PREFORMED ROAD MARKINGS |
| I.S. EN 1856-2:2009 | CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 2: METAL FLUE LINERS AND CONNECTING FLUE PIPES |
| I.S. EN 607:2004 | EAVES GUTTERS AND FITTINGS MADE OF PVC-U - DEFINITIONS, REQUIREMENTS AND TESTING |
| DIN EN 54-3:2001-10 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS |
| I.S. EN ISO 19902:2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES |
| I.S. EN ISO 14031:2013 | ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL PERFORMANCE EVALUATION - GUIDELINES (ISO 14031:2013) |
| I.S. EN 12446:2011 | CHIMNEYS - COMPONENTS - CONCRETE OUTER WALL ELEMENTS |
| I.S. EN 14286:2008 | ALUMINIUM AND ALUMINIUM ALLOYS - WELDABLE ROLLED PRODUCTS FOR TANKS FOR THE STORAGE AND TRANSPORTATION OF DANGEROUS GOODS |
| I.S. EN 12452:2012 | COPPER AND COPPER ALLOYS - ROLLED, FINNED, SEAMLESS TUBES FOR HEAT EXCHANGERS |
| I.S. EN 13255:2016 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
| I.S. EN ISO 10472-1:2008 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS |
| I.S. EN 12326-1:2014 | SLATE AND STONE FOR DISCONTINUOUS ROOFING AND EXTERNAL CLADDING - PART 1: SPECIFICATIONS FOR SLATE AND CARBONATE SLATE |
| I.S. EN 1804-2:2002 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 2: POWER SET LEGS AND RAMS |
| I.S. EN 13224:2011 | PRECAST CONCRETE PRODUCTS - RIBBED FLOOR ELEMENTS |
| DIN EN 15014:2008-01 | Plastics piping systems - Buried and above ground systems for water and other fluids under pressure - Performance characteristics for pipes, fittings and their joints |
| OVE/ONORM EN 61400-3 : 2010 | WIND TURBINES - PART 3: DESIGN REQUIREMENTS FOR OFFSHORE WIND TURBINES |
| I.S. EN 13265:2016 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN LIQUID WASTE CONTAINMENT PROJECTS |
| I.S. EN 13252:2016 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN DRAINAGE SYSTEMS |
| DIN EN 12452:2012-08 | COPPER AND COPPER ALLOYS - ROLLED, FINNED, SEAMLESS TUBES FOR HEAT EXCHANGERS |
| DEFSTAN 00-55(PT1)/4(2016) : 2016 | REQUIREMENTS FOR SAFETY OF PROGRAMMABLE ELEMENTS (PE) IN DEFENCE SYSTEMS - PART 1: REQUIREMENTS AND GUIDANCE |
| DIN EN 13481-8:2006-06 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 8: FASTENING SYSTEMS FOR TRACK WITH HEAVY AXLE LOADS |
| I.S. EN 13888:2009 | GROUT FOR TILES - REQUIREMENTS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
| EN 1804-1:2001+A1:2010 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements |
| DIN EN 1857:2010-08 | Chimneys - Components - Concrete flue liners |
| I.S. EN ISO 22442-2:2015 | MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - PART 2: CONTROLS ON SOURCING, COLLECTION AND HANDLING (ISO 22442-2:2015) |
| I.S. EN 2549:2006 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| I.S. EN 459-3:2015 | BUILDING LIME - PART 3: CONFORMITY EVALUATION |
| I.S. EN 13015:2001 | MAINTENANCE FOR LIFTS AND ESCALATORS - RULES FOR MAINTENANCE INSTRUCTIONS |
| I.S. EN 12168:2016 | COPPER AND COPPER ALLOYS - HOLLOW ROD FOR FREE MACHINING PURPOSES |
| I.S. EN 1253-3:2016 | GULLIES FOR BUILDINGS - PART 3: EVALUATION OF CONFORMITY |
| I.S. EN 1677-6:2001 | COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4 |
| DIN EN 14188-2:2005-03 | JOINT FILLERS AND SEALANTS - PART 2: SPECIFICATIONS FOR COLD APPLIED SEALANTS |
| I.S. EN 14422:2013 | CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES |
| EN 61400-1:2005/A1:2010 | WIND TURBINES - PART 1: DESIGN REQUIREMENTS |
| DIN EN 12094-8:2006-07 | Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors |
| I.S. EN 14680:2015 | ADHESIVES FOR NON-PRESSURE THERMOPLASTIC PIPING SYSTEMS - SPECIFICATIONS |
| DIN EN 1036-2:2008-05 | GLASS IN BUILDING - MIRRORS FROM SILVER-COATED FLOAT GLASS FOR INTERNAL USE - PART 2: EVALUATION OF CONFORMITY - PRODUCT STANDARD |
| DIN EN 197-2:2000-11 | CEMENT - PART 2: CONFORMITY EVALUATION |
| I.S. EN 998-1:2016 | SPECIFICATION FOR MORTAR FOR MASONRY - PART 1: RENDERING AND PLASTERING MORTAR |
| I.S. EN 1559-1:2011 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| I.S. EN 517:2006 | PREFABRICATED ACCESSORIES FOR ROOFING - ROOF SAFETY HOOKS |
| I.S. EN 13986:2004 | WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| I.S. EN 12591:2009 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
| I.S. EN ISO 14344:2010 | WELDING CONSUMABLES - PROCUREMENT OF FILLER MATERIALS AND FLUXES |
| I.S. EN 13967:2012 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF SHEETS INCLUDING PLASTIC AND RUBBER BASEMENT TANKING SHEET - DEFINITIONS AND CHARACTERISTICS |
| I.S. EN 520:2005 | GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 12101-3:2015 | SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT CONTROL VENTILATORS (FANS) |
| I.S. EN ISO 13849-1:2015 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN (ISO 13849-1:2015) |
| I.S. EN 13411-6:2004 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET |
| I.S. EN 14625:2012 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF OZONE BY ULTRAVIOLET PHOTOMETRY |
| I.S. EN 508-3:2008 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELFSUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 3: STAINLESS STEEL |
| I.S. EN 13084-7:2012 | FREE-STANDING CHIMNEYS - PART 7: PRODUCT SPECIFICATIONS OF CYLINDRICAL STEEL FABRICATIONS FOR USE IN SINGLE WALL STEEL CHIMNEYS AND STEEL LINERS |
| I.S. EN 694:2014 | FIRE-FIGHTING HOSES - SEMI-RIGID HOSES FOR FIXED SYSTEMS |
| I.S. EN 998-2:2016 | SPECIFICATION FOR MORTAR FOR MASONRY - PART 2: MASONRY MORTAR |
| I.S. EN 14342:2013 | WOOD FLOORING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| I.S. EN 818-1:1996 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 1: GENERAL CONDITIONS OF ACCEPTANCE |
| I.S. EN 13108-21:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 21: FACTORY PRODUCTION CONTROL |
| I.S. EN 13230-3:2016 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 3: TWIN-BLOCK REINFORCED SLEEPERS |
| I.S. EN 13479:2017 | WELDING CONSUMABLES - GENERAL PRODUCT STANDARD FOR FILLER METALS AND FLUXES FOR FUSION WELDING OF METALLIC MATERIALS |
| I.S. EN 508-1:2014 | ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL |
| I.S. EN 9100:2009 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS (BASED ON ISO 9001:2000) AND QUALITY SYSTEMS - MODEL FOR QUALITY ASSURANCE IN DESIGN, DEVELOPMENT, PRODUCTION, INSTALLATION AND SERVICING (BASED ON ISO 9001:1994) |
| I.S. EN 13481-8:2006 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 8: FASTENING SYSTEMS FOR TRACK WITH HEAVY AXLE LOADS |
| I.S. EN 12952-2:2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| I.S. EN 1263-1:2014 | TEMPORARY WORKS EQUIPMENT - SAFETY NETS - PART 1: SAFETY REQUIREMENTS, TEST METHODS |
| I.S. EN 13481-7:2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 7: SPECIAL FASTENING SYSTEMS FOR SWITCHES AND CROSSING AND CHECK RAILS |
| I.S. EN 13348:2016 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR MEDICAL GASES OR VACUUM |
| I.S. EN 13160-2:2016 | LEAK DETECTION SYSTEMS - PART 2: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR PRESSURE AND VACUUM SYSTEMS |
| I.S. EN 13602:2013 | COPPER AND COPPER ALLOYS - DRAWN, ROUND COPPER WIRE FOR THE MANUFACTURE OF ELECTRICAL CONDUCTORS |
| I.S. EN 3867:2005 | AEROSPACE SERIES - PIPE COUPLINGS, LOOSE FLANGES AND SEALS - FLANGES IN TITANIUM ALLOY TI-P64001 |
| I.S. EN 14626:2012 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF CARBON MONOXIDE BY NON-DISPERSIVE INFRARED SPECTROSCOPY |
| I.S. EN 13160-5:2016 | LEAK DETECTION SYSTEMS - PART 5: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR IN-TANK GAUGE SYSTEMS AND PRESSURISED PIPEWORK SYSTEMS |
| I.S. EN 13225:2013 | PRECAST CONCRETE PRODUCTS - LINEAR STRUCTURAL ELEMENTS |
| I.S. EN 490:2011 | CONCRETE ROOFING TILES AND FITTINGS FOR ROOF COVERING AND WALL CLADDING - PRODUCT SPECIFICATIONS |
| I.S. EN 10219-1:2006 | COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 1463-1:2009 | ROAD MARKING MATERIALS - RETROREFLECTING ROAD STUDS - PART 1: INITIAL PERFORMANCE REQUIREMENTS |
| DIN EN 729-3:1994-11 | QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - PART 3: STANDARD QUALITY REQUIREMENTS |
| I.S. EN 13257:2016 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN SOLID WASTE DISPOSALS |
| I.S. EN 3868:2005 | AEROSPACE SERIES - PIPE COUPLINGS, LOOSE FLANGES AND SEALS - FLANGE CONNECTORS, WELDED, IN TITANIUM ALLOY TI-P64001 |
| I.S. EN 13859-2:2014 | FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 2: UNDERLAYS FOR WALLS |
| I.S. EN ISO 7218:2007 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - GENERAL REQUIREMENTS AND GUIDANCE FOR MICROBIOLOGICAL EXAMINATIONS (ISO 7218:2007) |
| I.S. EN 12566-1:2016 | SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 1: PREFABRICATED SEPTIC TANKS |
| I.S. EN 13604:2013 | COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER |
| I.S. EN ISO 14727:1999 | DENTAL IMPLANTS - PREFABRICATED PARTS CONNECTING SUPRASTRUCTURES TO DENTAL IMPLANTS - CONTENTS OF TECHNICAL FILE |
| I.S. EN 14250:2010 | TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED STRUCTURAL MEMBERS ASSEMBLED WITH PUNCHED METAL PLATE FASTENERS |
| I.S. EN 13771-2:2017 | COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 2: CONDENSING UNITS |
| UNI EN 12668-2 : 2010 | NON-DESTRUCTIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC EXAMINATION EQUIPMENT - PART 2: PROBES |
| I.S. EN 13808:2013 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CATIONIC BITUMINOUS EMULSIONS |
| I.S. EN 13771-1:2016 | COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION PERFORMANCE TESTING AND TEST METHODS - PART 1: REFRIGERANT COMPRESSORS |
| I.S. EN 545:2010 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 13253:2016 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN EROSION CONTROL WORKS (COASTAL PROTECTION, BANK REVETMENTS) |
| I.S. EN 15014:2007 | PLASTICS PIPING SYSTEMS - BURIED AND ABOVE GROUND SYSTEMS FOR WATER AND OTHER FLUIDS UNDER PRESSURE - PERFORMANCE CHARACTERISTICS FOR PIPES, FITTINGS AND THEIR JOINTS |
| I.S. EN 14195:2014 | METAL FRAMING COMPONENTS FOR GYPSUM BOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 13250:2016 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RAILWAYS |
| DIN EN 12890:2000-06 | FOUNDING - PATTERNS, PATTERN EQUIPMENT AND CORE BOXES FOR THE PRODUCTION OF SAND MOULDS AND SAND CORES |
| I.S. EN 14375:2016 | CHILD-RESISTANT NON-RECLOSABLE PACKAGING FOR PHARMACEUTICAL PRODUCTS - REQUIREMENTS AND TESTING |
| I.S. EN 12050-2:2015 | WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 2: LIFTING PLANTS FOR FAECAL-FREE WASTEWATER |
| I.S. EN 12899-1:2007 | FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 1: FIXED SIGNS |
| I.S. EN 12781:2001 | WALLCOVERINGS - SPECIFICATION FOR CORK PANELS |
| I.S. EN 683-1:2006 | ALUMINIUM AND ALUMINIUM ALLOYS - FINSTOCK - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| I.S. EN 13950:2014 | GYPSUM BOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 9111:2006 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - ASSESSMENT APPLICABLE TO MAINTENANCE ORGANIZATIONS |
| DIN EN 1947:2002-11 | FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES |
| I.S. EN 2889:2006 | AEROSPACE SERIES - METRIC BOLTS, NORMAL HEXAGON HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| I.S. EN 442-1:2014 | RADIATORS AND CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS |
| I.S. EN 14212:2012 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF SULPHUR DIOXIDE BY ULTRAVIOLET FLUORESCENCE |
| I.S. EN 12209:2016 | BUILDING HARDWARE - MECHANICALLY OPERATED LOCKS AND LOCKING PLATES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 14814:2016 | ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS FOR FLUIDS UNDER PRESSURE - SPECIFICATIONS |
| I.S. EN 12668-1:2010 | NON-DESTRUCTIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC EXAMINATION EQUIPMENT - PART 1: INSTRUMENTS |
| I.S. EN 1422:2014 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 1504-8:2016 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 8: QUALITY CONTROL AND ASSESSMENT AND VERIFICATION OF THE CONSTANCY OF PERFORMANCE (AVCP) |
| I.S. EN 1492-4:2004 | TEXTILE SLINGS - SAFETY - PART 4: LIFTING SLINGS FOR GENERAL SERVICE MADE FROM NATURAL AND MAN-MADE FIBRE ROPES |
| EN ISO 22442-2:2015 | Medical devices utilizing animal tissues and their derivatives - Part 2: Controls on sourcing, collection and handling (ISO 22442-2:2015) |
| DIN EN 1453-1:2017-09 | PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES AND THE SYSTEM |
| I.S. EN 1304:2013 | CLAY ROOFING TILES AND FITTINGS - PRODUCT DEFINITIONS AND SPECIFICATIONS |
| I.S. EN 516:2006 | PREFABRICATED ACCESSORIES FOR ROOFING - INSTALLATIONS FOR ROOF ACCESS - WALKWAYS, TREADS AND STEPS |
| I.S. EN 12451:2012 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS |
| I.S. EN 12952-5:2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
| I.S. EN 13956:2012 | FLEXIBLE SHEET FOR WATERPROOFING - PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING - DEFINITIONS AND CHARACTERISTICS |
| I.S. EN ISO 11980:2012 | OPHTHALMIC OPTICS - CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - GUIDANCE FOR CLINICAL INVESTIGATIONS (ISO 11980:2012) |
| UNI EN 1804-1 : 2010 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 1: SUPPORT UNITS AND GENERAL REQUIREMENTS |
| I.S. EN 13411-7:2006 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET |
| I.S. EN 10210-1:2006 | HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| DIN EN 12966-3:2005-07 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 3: FACTORY PRODUCTION CONTROL |
| I.S. EN 14411:2016 | CERAMIC TILES - DEFINITION, CLASSIFICATION, CHARACTERISTICS, ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE AND MARKING |
| I.S. EN ISO 10451:2010 | DENTISTRY - CONTENTS OF TECHNICAL FILE FOR DENTAL IMPLANT SYSTEMS |
| I.S. EN 12566-4:2016 | SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 4: SEPTIC TANKS ASSEMBLED IN SITU FROM PREFABRICATED KITS |
| I.S. EN 1453-1:2017 | PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1 - SPECIFICATIONS FOR PIPES AND THE SYSTEM |
| DIN EN ISO 14557:2008-01 | Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies (ISO 14557:2002 + AMD 1:2007); German version EN ISO 14557:2002 + A1:2007 |
| I.S. EN 1125:2008 | BUILDING HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 14125:2013 | THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS |
| I.S. EN 13964:2014 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| DIN EN 12080:2017-11 | Railway applications - Axleboxes - Rolling bearings |
| IEC 61174:2015 RLV | Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information system (ECDIS) - Operational and performance requirements, methods of testing and required test results |
| DIN EN 1790:2013-12 | ROAD MARKING MATERIALS - PREFORMED ROAD MARKINGS |
| I.S. EN 1856-1:2009 | CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 1: SYSTEM CHIMNEY PRODUCTS |
| DIN EN 13069:2005-12 | Chimneys - Clay/ceramic outer walls for system chimneys - Requirements and test methods |
| I.S. EN 1776:2015 | GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS |
| I.S. EN 1344:2013 | CLAY PAVERS - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 17662:2016 | WELDING - CALIBRATION, VERIFICATION AND VALIDATION OF EQUIPMENT USED FOR WELDING, INCLUDING ANCILLARY ACTIVITIES (ISO 17662:2016) |
| I.S. EN 13802:2013 | RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS |
| I.S. EN ISO 14554-2:2013 | QUALITY REQUIREMENTS FOR WELDING - RESISTANCE WELDING OF METALLIC MATERIALS - PART 2: ELEMENTARY QUALITY REQUIREMENTS (ISO 14554-2:2013) |
| I.S. EN 14566:2008 | MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| EN 61850-4:2011 | Communication networks and systems for power utility automation - Part 4: System and project management |
| I.S. EN 15274:2015 | GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 14554-1:2013 | QUALITY REQUIREMENTS FOR WELDING - RESISTANCE WELDING OF METALLIC MATERIALS - PART 1: COMPREHENSIVE QUALITY REQUIREMENTS (ISO 14554-1:2013) |
| I.S. EN 13674-1:2011 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| I.S. EN 12050-4:2015 | WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 4: NON-RETURN VALVES FOR FAECAL-FREE WASTEWATER AND WASTEWATER CONTAINING FAECAL MATTER |
| I.S. EN 12165:2016 | COPPER AND COPPER ALLOYS - WROUGHT AND UNWROUGHT FORGING STOCK |
| UNI EN ISO 11737-2 : 2010 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
| CEN/TS 16555-1:2013 | Innovation Management - Part 1: Innovation Management System |
| I.S. EN 12164:2016 | COPPER AND COPPER ALLOYS - ROD FOR FREE MACHINING PURPOSES |
| I.S. EN 15317:2013 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC THICKNESS MEASURING EQUIPMENT |
| I.S. EN 13341:2005 | STATIC THERMOPLASTIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED AND ROTATIONALLY MOULDED POLYETHYLENE TANKS AND ROTATIONALLY MOULDED TANKS MADE OF ANIONICALLY POLYMERIZED POLYAMIDE 6 - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 1461:2009 | HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS |
| I.S. EN ISO 10007:1997 | QUALITY MANAGEMENT - GUIDELINES FOR CONFIGURATION MANAGEMENT |
| I.S. EN 12668-2:2010 | NON-DESTRUCTIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC EXAMINATION EQUIPMENT - PART 2: PROBES |
| I.S. EN 14891:2017 | LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, CLASSIFICATION AND MARKING |
| I.S. EN 13212:2011 | ROAD MARKING MATERIALS - REQUIREMENTS FOR FACTORY PRODUCTION CONTROL |
| I.S. EN 13254:2016 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR THE USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
| I.S. EN 4166:2005 | AEROSPACE SERIES - CLIPS, SPRING TENSION, THREE PARTS - PTFE BUSHES |
| I.S. EN 13481-2:2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 2: FASTENING SYSTEMS FOR CONCRETE SLEEPERS |
| DIN ISO 19258:2006-05 | SOIL QUALITY - GUIDANCE ON THE DETERMINATION OF BACKGROUND VALUES |
| I.S. EN 14662-3:2015 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF BENZENE CONCENTRATIONS - PART 3: AUTOMATED PUMPED SAMPLING WITH IN SITU GAS CHROMATOGRAPHY |
| I.S. EN 12735-2:2016 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR AIR CONDITIONING AND REFRIGERATION - PART 2: TUBES FOR EQUIPMENT |
| I.S. EN 9121:2009 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - ASSESSMENT APPLICABLE TO STOCKIST DISTRIBUTORS |
| I.S. EN 13172:2012 | THERMAL INSULATION PRODUCTS - EVALUATION OF CONFORMITY |
| DIN EN 14585-1 Beiblatt 1:2006-04 | Corrugated metal hose assemblies for pressure applications - Part 2: Guidance on the use of conformity assessment procedures |
| I.S. EN 12420:2014 | COPPER AND COPPER ALLOYS - FORGINGS |
| I.S. EN 12050-3:2015 | WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 3: LIFTING PLANTS FOR LIMITED APPLICATIONS |
| DIN EN 10025-1:2005-02 | Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version EN 10025-1:2004 |
| I.S. EN 2859:2006 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED, METRIC SERIES - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| I.S. EN 14359:2017 | GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
| I.S. EN 12050-1:2015 | WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 1: LIFTING PLANTS FOR WASTEWATER CONTAINING FAECAL MATTER |
| I.S. EN 10255:2004 | NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 1857:2010 | CHIMNEYS - COMPONENTS - CONCRETE FLUE LINERS |
| I.S. EN 13204:2016 | DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
| I.S. EN 494:2012 | FIBRE-CEMENT PROFILED SHEETS AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS |
| I.S. EN 544:2011 | BITUMEN SHINGLES WITH MINERAL AND/OR SYNTHETIC REINFORCEMENTS - PRODUCT SPECIFICATION AND TEST METHODS |
| I.S. EN 12094-8:2006 | FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 8: REQUIREMENTS AND TEST METHODS FOR CONNECTORS |
| I.S. EN 13160-4:2016 | LEAK DETECTION SYSTEMS - PART 4: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR SENSOR BASED LEAK DETECTION SYSTEMS |
| I.S. EN 15434:2006 | GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRAVIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS) |
| I.S. EN ISO 15882:2008 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS |
| DIN EN 12591:2009-08 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
| I.S. EN 14399-1:2015 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 351-1:2007 | DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - PRESERVATIVE-TREATED SOLID WOOD - PART 1: CLASSIFICATION OF PRESERVATIVE PENETRATION AND RETENTION |
| I.S. EN 12163:2016 | COPPER AND COPPER ALLOYS - ROD FOR GENERAL PURPOSES |
| I.S. EN 506:2008 | ROOFING PRODUCTS OF METAL SHEET - SPECIFICATION FOR SELFSUPPORTING PRODUCTS OF COPPER OR ZINC SHEET |
| I.S. EN 14420-1:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, TYPES OF FIXING AND CONNECTION, DESIGNATION AND TESTING |
| I.S. EN 15275:2015 | STRUCTURAL ADHESIVES - CHARACTERISATION OF ANAEROBIC ADHESIVES FOR CO-AXIAL METALLIC ASSEMBLY IN BUILDING AND CIVIL ENGINEERING STRUCTURES |
| EN 16351:2015 | Timber structures - Cross laminated timber - Requirements |
| DIN EN 1422:1997-11 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| UNI EN 1677-6 : 2009 | COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4 |
| UNI EN 13970 : 2007 | FLEXIBLE SHEETS FOR WATERPROOFING - BITUMEN WATER VAPOUR CONTROL LAYERS - DEFINITIONS AND CHARACTERISTICS |
| UNI EN 13984 : 2013 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER VAPOUR CONTROL LAYERS - DEFINITIONS AND CHARACTERISTICS |
| UNI EN 13693 : 2009 | PRECAST CONCRETE PRODUCTS - SPECIAL ROOF ELEMENTS |
| UNI ISO/TR 18532 : 2010 | Guide to the application of statistical methods for quality and standardization in the industrial sector |
| ONORM EN 1519-1 : 2014 | PLASTICS PIPING SYSTEMS FOR SOIL AND WATER DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| UNI EN 14286 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - WELDABLE ROLLED PRODUCTS FOR TANKS FOR THE STORAGE AND TRANSPORTATION OF DANGEROUS GOODS |
| ONORM EN ISO 21003-1 : 2012 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL (ISO 21003-1:2008) |
| UNI EN 694 : 2014 | FIRE-FIGHTING HOSES - SEMI-RIGID HOSES FOR FIXED SYSTEMS |
| ASME B16.21 : 2016 | NONMETALLIC FLAT GASKETS FOR PIPE FLANGES |
| SAEITC TS220-1 | TS220 Technical Specification for Self Locking Union Nuts (Unified Threads) Manufactured from INCO718 Material.1270 MPa (185000 lbf/in2) Minimum Tensile Strength at Room Temperature |
| VDE 0674-1 : 2001-12 | TESTS ON INDOOR AND OUTDOOR POST INSULATORS OF CERAMIC MATERIAL OR GLASS FOR SYSTEMS WITH NOMINAL VOLTAGES GREATER THAN 1 KV |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| VDI/VDE 2617 Blatt 10:2011-01 | Accuracy of coordinate measuring machines - Characteristics and their checking - Acceptance and reverification tests of lasertrackers |
| VDI 6600 Blatt 1:2006-10 | Project engineer - Knowledge profile |
| VDI 4075 Blatt 8:2017-06 | Cleaner production (PIUS) - Breweries |
| VDI 4085:2017-04 | Planning, construction and managing of scrapyards - Facilities and equipment for the handling, storage and treatment of scraps and other materials |
| DIN EN 61284 : 1998 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS |
| VDI 4500 Blatt 4:2011-12 | Technical documentation - Documentation process - Planning, layout, creation |
| VDI 3890:2016-03 | Emission control - Pet cremation facilities |
| VDI 4203 Blatt 1:2017-09 | Automated measuring systems and data evaluation systems for emission monitoring - Performance test, declaration of suitability and certification of stationary automated measuring systems and check of the quality management system of the manufacturer |
| VDI/VDE 2600 Blatt 1:2013-10 | Inspection process management - Identification, classification and proof of suitability for inspection processes |
| KTA 3507 : 2014(R2017) | FACTORY TESTS, POST-REPAIR TESTS AND CERTIFICATION OF SATISFACTORY PERFORMANCE IN SERVICE OF MODULES AND DEVICES FOR THE INSTRUMENTATION AND CONTROLS OF THE SAFETY SYSTEM |
| VDI/VDE 2862 Blatt 2:2015-02 | Minimum requirements for application of fastening systems and tools - Applications in plant construction, mechanical engineering, equipment manufacturing and for flange connections in components under pressure boundary |
| VDI 6041:2017-07 | Facility management - Technical monitoring of buildings and building services |
| SBAC TS 128 : 6 | 'ALL-METAL' SELF-LOCKING NUTS (UNJ THREADS) 1100 MPA (160,000 LBF/IN[2]) MINIMUM TENSILE STRENGTH AT ROOM TEMPERATURE |
| VDI 4510:2006-05 | Engineering services and requirements to engineering service providers |
| VDI 2168:2007-04 | Lifts - Personnel qualification |
| VDI 2700 Blatt 5:2011-12 | Securing of loads on road vehicles - Quality management systems |
| VDI 4070 Blatt 1:2016-02 | Sustainable management in small and medium-sized enterprises - Guidance notes for sustainable management |
| VDI/VDE 2617 Blatt 8:2006-07 | Accuracy of coordinate measuring machines - Characteristics and their testing - Test suitability of measurements with coordinate measuring machines |
| VDI 4060 Blatt 2:2005-06 | Integrated Management Systems - Guidance for practical implementation - Case studies |
| VDI/VDE 2862 Blatt 1:2012-04 | Minimum restrictions for application of fastening systems and tools - Applications in the automotive industry |
| DIN EN 16855-1:2017-05 | WALK-IN COLD ROOMS - DEFINITION, THERMAL INSULATION PERFORMANCE AND TEST METHODS - PART 1: PREFABRICATED COLD ROOM KITS |
| VDI 3822:2011-11 | Failure analysis - Fundamentals and performance of failure analysis |
| ASME B16.49 : 2017 | FACTORY-MADE, WROUGHT STEEL, BUTTWELDING INDUCTION BENDS FOR TRANSPORTATION AND DISTRIBUTION SYSTEMS |
| VDI 4208 Blatt 1:2013-01 | Requirements on bodies for emission monitoring at small firing installations - Bodies for the determination of emissions |
| VDI 2083 Blatt 8.1:2014-10 | Cleanroom technology - Air cleanliness chemical concentration (ACC) |
| VDI 2083 Blatt 9.2:2017-01 | Cleanroom technology - Consumables in the cleanroom |
| VDI 5600 Blatt 1:2016-10 | Manufacturing execution systems (MES) |
| VDI 4084:2017-09 (Draft) | Corrective maintenance and remanufacturing of internal combustion engines - Terminology and processes |
| BS 7011-2.2:1998 | Consumable accessories for light microscopes. Slides Specification for materials and quality of finish |
| DIN EN 60168 : 2001-12 | TESTS ON INDOOR AND OUTDOOR POST INSULATORS OF CERAMIC MATERIAL OR GLASS FOR SYSTEMS WITH NOMINAL VOLTAGES GREATER THAN 1 KV |
| VDI 4060 Blatt 1:2005-06 | Integrated Management Systems - Guidance for practical implementation - General information |
| DIN IEC 60880-2 : 2001 | NUCLEAR POWER PLANTS - SOFTWARE FOR COMPUTERS IMPORTANT TO SAFETY - PART 2: SOFTWARE ASPECTS OF DEFENCE AGAINST COMMON CAUSE FAILURES, USE OF SOFTWARE TOOLS AND OF PRE-DEVELOPED SOFTWARE |
| BS 5760-1:1996 | Reliability of systems, equipment and components Dependability programme elements and tasks |
| IALA G1168:2022 | QUALITY CONTROL OF THIRD-PARTY ATON SERVICE PROVIDERS |
| IALA G1118:2022 | MARINE CASUALTY – INCIDENT REPORTING AND RECORDING INCLUDING NEAR-MISS SITUATIONS AS IT RELATES TO VTS |
| VDI 2083 Blatt 3:2005-07 | Cleanroom technology - Metrology and test methods |
| VDE 0212-1 : 1998 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS |
| VDI 4087:2016-12 | Planning, construction and managing of scrap wood yards |
| VDI 4208 Blatt 2:2011-10 | Requirements on bodies for emission monitoring at small firing installations - Bodies for periodic testing of performance-tested measuring devices |
| VDI 2878 Blatt 4:2016-05 | Application of thermography to maintenance diagnostics - Equipment technology |
| BS 3598:1998 | Fissile materials. Criticality safety in handling and processing. Recommendations |
| VDI 2262 Blatt 1:2013-06 | Workplace air - Reduction of exposure to air pollutants - Legal principles, terms and definitions, basic organisational measures for industrial safety and environmental protection |
| VDI 2083 Blatt 12:2000-01 | Cleanroom technology - Safety and environmental aspects |
| UNE-ISO/IEC 20000-2:2015 | Information technology. Service management. Part 2: Guidance on the application of service management systems |
| BS ISO 39001:2012 | Road traffic safety (RTS) management systems. Requirements with guidance for use |
| NFPA 1976 : 2000 | PROTECTIVE ENSEMBLE FOR PROXIMITY FIRE FIGHTING |
| UNE-EN 13616-1:2016 | Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device |
| ASTM F 3302 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion |
| DIN EN 15683-2:2014-02 | GLASS IN BUILDING - THERMALLY TOUGHENED SODA LIME SILICATE CHANNEL SHAPED SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD |
| I.S. EN 3840:2007 | AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
| CEI CLC/TS 50537-3 : 2011 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 3: WATER PUMP FOR TRACTION CONVERTERS |
| DIN V ENV 1452-7:2001-03 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| CEI EN 60903 : 2005 | LIVE WORKING - GLOVES OF INSULATING MATERIAL IMPIANTI |
| CEI UNI EN 45510-6-5 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-5: TURBINE AUXILIARIES - DRY COOLING SYSTEMS |
| DD CEN/TS 14541:2007 | Plastics pipes and fittings for non-pressure applications. Utilisation of non-virgin PVC-U, PP and PE materials |
| EN 1279-5:2005+A2:2010 | Glass in building - Insulating glass units - Part 5: Evaluation of conformity |
| BS ISO 10004:2012 | Quality management. Customer satisfaction. Guidelines for monitoring and measuring |
| 07/30162849 DC : 0 | BS ISO/IEC 19796-3 - INFORMATION TECHNOLOGY FOR LEARNING, EDUCATION AND TRAINING - QUALITY - MANAGEMENT, ASSURANCE AND METRICS - PART 3: REFERENCE METHODS AND METRICS |
| CSA ISO 14031 : 2014 | ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL PERFORMANCE EVALUATION - GUIDELINES |
| BS EN 3389:2009 | Aerospace series. Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH1302 (Waspaloy). Classification: 1210 MPa/730°C. Manufacturing method optional. Technical specification |
| 11/30218155 DC : 0 | BS EN ISO 10380 - PIPEWORK - CORRUGATED METAL HOSES AND HOSE ASSEMBLIES |
| BS ISO 30003:2009 | Ships and marine technology. Ship recycling management systems. Requirements for bodies providing audit and certification of ship recycling management |
| BS ISO 15198:2004 | Clinical laboratory medicine. In vitro diagnostic medical devices. Validation of user quality control procedures by the manufacturer |
| BS EN 14055 : 2010 | WC AND URINAL FLUSHING CISTERNS |
| UNE-EN 50556:2011 | Road traffic signal systems |
| IEEE 12207.0-1996 | IEEE/EIA Standard - Industry Implementation of International Standard ISO/IEC 12207:1995 (ISO/IEC 12207) Standard for Information Technology -- Software Life Cycle Processes |
| ISO/IEC TR 20000-11:2015 | Information technology Service management Part 11: Guidance on the relationship between ISO/IEC 20000-1:2011 and service management frameworks: ITIL |
| BS ISO/IEC 29155-1:2017 | Systems and software engineering. Information technology project performance benchmarking framework Concepts and definitions |
| SAE AS 9121 : 2012 | STOCKIST DISTRIBUTORS QUALITY SYSTEM QUESTIONNAIRE ASSOCIATED WITH AS9120 |
| BS EN 14587-1:2007 | Railway applications. Track. Flash butt welding of rails New R220, R260, R260Mn and R350HT grade rails in a fixed plant |
| DIN EN 14967:2006-08 | Flexible sheets for waterproofing - Bitumen damp proof courses - Definitions and characteristics |
| 12/30256417 DC : 0 | BS EN 54-31 - FIRE DETECTION AND FIRE ALARM SYSTEM - PART 31: MULTI-SENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF SMOKE, CARBON MONOXIDE AND OPTIONALLY HEAT SENSORS |
| I.S. EN 15001-2:2008 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON INDUSTRIAL INSTALLATIONS - PART 2: DETAILED FUNCTIONAL REQUIREMENTS FOR COMMISSIONING, OPERATION AND MAINTENANCE |
| CSA ISO/IEC 15939:2008 | SYSTEMS AND SOFTWARE ENGINEERING - MEASUREMENT PROCESS |
| BS ISO 35103:2017 | Petroleum and natural gas industries. Arctic operations. Environmental monitoring |
| 15/30329378 DC : 0 | BS EN 9110 - AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION MAINTENANCE ORGANIZATIONS |
| UNE-EN 13915:2018 | Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods |
| ISO 12944-4:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation |
| DIN ISO 20121:2013-04 | Event sustainability management systems - Requirements with guidance for use (ISO 20121:2012) |
| EN 4691-1:2017 | Aerospace series - Tie rod with integrated bolts - Part 1: Technical specification |
| IEEE 1100 : 2005 | POWERING AND GROUNDING ELECTRONIC EQUIPMENT |
| PREN 1401-1 : DRAFT 2018 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEMS |
| UNI EN 15213-4 : 2013 | INTELLIGENT TRANSPORT SYSTEMS - AFTER-THEFT SYSTEMS FOR THE RECOVERY OF STOLEN VEHICLES - PART 4: INTERFACE AND SYSTEM REQUIREMENTS IN TERMS OF LONG RANGE COMMUNICATION SYSTEM |
| UNI CEN/TS 1565-2 : 2012 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - STYRENE-COPOLYMER BLENDS (SAN+PVC) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| 14/30291693 DC : 0 | BS ISO 21927-7 - SMOKE AND HEAT CONTROL SYSTEMS - PART 7: SMOKE DUCTS SECTIONS |
| 04/30048118 DC : DRAFT MAY 2004 | BS EN ISO 11135 - STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| API STD 20M : 2017 | QUALIFICATION OF SUPPLIERS OF MACHINING SERVICES FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| I.S. EN ISO/IEC 17021-1:2015 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 1: REQUIREMENTS (ISO/IEC 17021-1:2015) |
| 03/306637 DC : DRAFT APR 2003 | EN 13674-4 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: FLAT BOTTOM SYMMETRICAL RAILWAY RAILS FROM 27 KG/M TO 46 KG/M |
| DIN EN 54-23:2010-06 | Fire detection and fire alarm systems - Part 23: Fire alarm devices - Visual alarm devices |
| I.S. EN 60987:2015 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - HARDWARE DESIGN REQUIREMENTS FOR COMPUTER-BASED SYSTEMS |
| 17/30353412 DC : 0 | BS EN 15276-2 - FIXED FIREFIGHTING SYSTEMS - CONDENSED AEROSOL EXTINGUISHING SYSTEMS - PART 2: DESIGN, INSTALLATION AND MAINTENANCE |
| 14/30309692 DC : 0 | BS EN 61189-5-1 ED 1.0 - TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-1: TEST METHODS FOR PRINTED BOARD ASSEMBLIES AND MATERIALS USED IN MANUFACTURING ELECTRONIC ASSEMBLIES - GUIDANCE DOCUMENTS AND HANDBOOKS |
| BS EN 4130:2009 | Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambient temperature) / 425 °C |
| 17/30351251 DC : 0 | BS EN 62959 - ENVIRONMENTAL CONSCIOUS DESIGN (ECD) - PRINCIPLES, REQUIREMENTS AND GUIDANCE |
| PD CEN ISO/TS 13972:2015 | Health informatics. Detailed clinical models, characteristics and processes |
| 08/30156651 DC : DRAFT JULY 2008 | BS ISO 25119-4 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 4: PRODUCTION, OPERATION, MODIFICATION AND SUPPORTING PROCESSES |
| 08/30135847 DC : DRAFT AUG 2008 | BS ISO 9004 - MANAGING FOR THE SUSTAINED SUCCESS OF AN ORGANIZATION - A QUALITY MANAGEMENT APPROACH |
| DIN EN 1337-8:2008-01 | STRUCTURAL BEARINGS - PART 8: GUIDE BEARINGS AND RESTRAINT BEARINGS |
| 17/30341004 DC : 0 | BS EN 50238-1 - RAILWAY APPLICATIONS - COMPATIBILITY BETWEEN ROLLING STOCK AND TRAIN DETECTION SYSTEMS - PART 1: GENERAL |
| ANSI/AAMI/ISO 20857:2010(R2015) | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| DIN EN 1474-1:2009-03 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS |
| 02/103343 DC : DRAFT MAY 2002 | PREN 14457 - GENERAL REQUIREMENTS FOR COMPONENTS SPECIFICALLY DESIGNED FOR USE IN TRENCHLESS CONSTRUCTION OF DRAINS AND SEWERS |
| PD ISO/IEC TR 15443-3:2007 | Information technology. Security techniques. A framework for IT security assurance Analysis of assurance methods |
| 17/30364341 DC : 0 | BS EN 1519-1 - PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLENE (PE) - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND THE SYSTEM |
| CEI EN 60895 : 2005 | LIVE WORKING - CONDUCTIVE CLOTHING FOR USE AT NOMINAL VOLTAGE UP TO 800 KV AC AND (+/-) 600 KV DC |
| PREN 1594 : DRAFT 2013 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS |
| PREN 556-2 : DRAFT 2014 | STERILIZATION OF MEDICAL DEVICES - REQUIREMENTS FOR MEDICAL DEVICES TO BE DESIGNATED 'STERILE' - PART 2: REQUIREMENTS FOR ASEPTICALLY PROCESSED MEDICAL DEVICES |
| PREN 13230-4 : DRAFT 2014 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 4: PRESTRESSED BEARERS FOR SWITCHES AND CROSSINGS |
| CAN/CSA-ISO 14004:16 | Environmental management systems — General guidelines on implementation |
| BS EN 61811-1:2015 | Electromechanical telecom elementary relays of assessed quality Generic specification and blank detail specification |
| DIN EN 16647:2016-04 | FIREPLACES FOR LIQUID FUELS - DECORATIVE APPLIANCES PRODUCING A FLAME USING ALCOHOL BASED OR GELATINOUS FUEL - USE IN PRIVATE HOUSEHOLDS |
| 05/30106194 DC : 0 | EN ISO 22442-2 - MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - PART 2: CONTROLS ON SOURCING, COLLECTION AND HANDLING |
| BS EN 50128:2011 | Railway applications. Communication, signalling and processing systems. Software for railway control and protection systems |
| 08/30186163 DC : DRAFT JULY 2008 | BS IEC 60092-306 - ELECTRICAL INSTALLATIONS IN SHIPS - PART 306: EQUIPMENT - LUMINAIRES AND LIGHTING ACCESSORIES |
| DD CEN/TS 1852-2:2009 | Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP) Guidance for the assessment of conformity |
| I.S. EN 14688:2015 | SANITARY APPLIANCES - WASH BASINS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| ASTM F 2444 : 2004 : R2018 | Standard Practice for Damage Prevention of Bearings, and Bearing Components Through Proper Handling Techniques |
| API Q1 RUSSIAN : 2013 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR MANUFACTURING ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRY. |
| UNI EN 14636-1 : 2010 | PLASTICS PIPING SYSTEMS FOR NON- PRESSURE DRAINAGE AND SEWERAGE - POLYESTER RESIN CONCRETE (PRC) - PART 1: PIPES AND FITTINGS WITH FLEXIBLE JOINTS |
| 06/30155957 DC : DRAFT SEP 2006 | BS ISO 28004 - SECURITY MANAGEMENT SYSTEMS FOR THE SUPPLY CHAIN - GUIDELINES FOR THE IMPLEMENTATION OF ISO/PAS 28000 |
| I.S. EN 450-2:2005 | FLY ASH FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
| 03/103468 DC : DRAFT FEB 2003 | BS EN 10210-1 - HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY REQUIREMENTS |
| BS EN 9137:2012 | Quality management systems. Guidance for the Application of AQAP 2110 within an EN 9100 Quality Management System |
| 15/30320780 DC : 0 | BS EN 862 - PACKAGING - CHILD-RESISTANT PACKAGING - REQUIREMENTS AND TESTING PROCEDURES FOR NON-RECLOSABLE PACKAGES FOR NON-PHARMACEUTICAL PRODUCTS |
| 13/30272419 DC : 0 | BS EN 14662-3 - AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF BENZENE CONCENTRATIONS - PART 3: AUTOMATED PUMPED SAMPLING WITH IN SITU GAS CHROMATOGRAPHY |
| BS EN 3388:2009 | Aerospace series. Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification 1275 MPa/650°C. Manufacturing method optional. Technical specification |
| BS ISO 30301:2011 | Information and documentation. Management systems for records. Requirements |
| I.S. EN 13240:2001 | ROOMHEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| SAE AS 9104 : 2017 | REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM CERTIFICATION/REGISTRATIONS PROGRAMS |
| PD ISO/IEC TR 20000-12:2016 | Information technology. Service management Guidance on the relationship between ISO/IEC 20000-1:2011 and service management frameworks: CMMI-SVC® |
| 14/30313297 DC : 0 | BS EN 13771-1 - COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 1: REFRIGERANT COMPRESSORS |
| 13/30277410 DC : 0 | BS EN 15317 - NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC THICKNESS MEASURING EQUIPMENT |
| 08/30156648 DC : DRAFT JULY 2008 | BS ISO 25119-3 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 3: SERIES DEVELOPMENT, HARDWARE AND SOFTWARE |
| I.S. EN 15102:2007 | DECORATIVE WALL COVERINGS - ROLL AND PANEL FORM |
| BS PAS 7000(2014) : 2014 | SUPPLY CHAIN RISK MANAGEMENT - SUPPLIER PREQUALIFICATION |
| 04/30115497 DC : 0 | EN 45545-6 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 6: FIRE CONTROL AND MANAGEMENT SYSTEMS |
| BS EN 13055:2016 | Lightweight aggregates |
| 02/709705 DC : DRAFT AUG 2002 | BS ISO 15865 - SPACE SYSTEMS - QUALIFICATION ASSESSMENT |
| 16/30338117 DC : 0 | BS EN 13493 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
| ISO 404:2013 | Steel and steel products — General technical delivery requirements |
| BS ISO 50004:2014 | Energy management systems. Guidance for the implementation, maintenance and improvement of an energy management system |
| BS EN 16853:2017 | Conservation of cultural heritage. Conservation process. Decision making, planning and implementation |
| AAMI ISO 11137-1 : 2006 : INC : AMD 1 : 2013 : R201000 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 11/30237554 DC : 0 | BS EN 14732 - TIMBER STRUCTURES - PREFABRICATED WALL, FLOOR AND ROOF ELEMENTS - REQUIREMENTS |
| I.S. EN 62138:2009 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT FOR SAFETY - SOFTWARE ASPECTS FOR COMPUTER-BASED SYSTEMS PERFORMING CATEGORY B OR C FUNCTIONS |
| DD ENV 1566-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Guidance for the assessment of conformity |
| BS ISO 18788:2015 | Management system for private security operations. Requirements with guidance for use |
| BS EN 45510-6-8:2000 | Guide for the procurement of power station equipment. Turbine auxiliaries Cranes - Section 8: Cranes |
| BS ISO 11462-1:2001 | Guidelines for implementation of statistical process control (SPC) Elements of SPC |
| I.S. EN 274-3:2002 | WASTE FITTINGS FOR SANITARY APPLIANCES - PART 3: QUALITY CONTROL |
| BS ISO/IEC 15504-6:2013 | Information technology. Process assessment An exemplar system life cycle process assessment model |
| BS EN 15358:2011 | Solid recovered fuels. Quality management systems. Particular requirements for their application to the production of solid recovered fuels |
| 02/121563 DC : DRAFT APR 2002 | BS EN 14409-1 - PLASTICS PIPING SYSTEMS FOR THE RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 1: GENERAL |
| BS EN 3538:2010 | Aerospace series. Nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315°C |
| BS EN 10253-3:2008 | Butt-welding pipe fittings Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements |
| BS IEC 62671:2013 | Nuclear power plants. Instrumentation and control important to safety. Selection and use of industrial digital devices of limited functionality |
| PD 6573:1994 | Fundamental aspects of safety standards for medical electrical equipment |
| 09/30196772 DC : 0 | BS ISO 7240-24 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: SOUND-SYSTEM LOUDSPEAKERS |
| 16/30330102 DC : 0 | BS ISO 16762 - GRAPHIC TECHNOLOGY - POST PRESS - GENERAL REQUIREMENTS FOR TRANSFER, HANDLING AND STORAGE |
| BS EN 14545:2008 | Timber structures. Connectors. Requirements |
| 15/30329398 DC : 0 | BS EN 14411 - CERAMIC TILES - DEFINITION, CLASSIFICATION, CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| DIN CEN/TS 1452-7;DIN SPEC 19675:2014-05 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| 08/30194290 DC : 0 | BS EN 1856-1 - CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 1: SYSTEM CHIMNEY PRODUCTS |
| I.S. EN 12966-3:2005 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 3: FACTORY PRODUCTION CONTROL |
| I.S. EN ISO 11442:2006 | TECHNICAL PRODUCT DOCUMENTATION - DOCUMENT MANAGEMENT |
| PD CEN/TR 15367-3:2009 | Petroleum products. Guide for good housekeeping Prevention of cross contamination |
| DD CEN/TS 1591-4:2007 | Flanges and their joints. Design rules for gasketed circular flange connections Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive |
| PREN 997 : DRAFT 2017 | WC PANS AND WC SUITES WITH INTEGRAL TRAP |
| CEI EN 60896-22 : 2005 | STATIONARY LEAD-ACID BATTERIES - PART 22: VALVE REGULATED TYPES - REQUIREMENTS |
| PREN 13160-4 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 4: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR SENSOR BASED LEAK DETECTION SYSTEMS |
| PREN 1125 : DRAFT 2016 | BUILD HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| DIN EN 15267-2:2009-07 | Air quality - Certification of automated measuring systems - Part 2: Initial assessment of the AMS manufacturer?s quality management system and post certification surveillance for the manufacturing process |
| CEI EN 61160 : 2006 | DESIGN REVIEW |
| ISO/IEC/IEEE 16326:2009 | Systems and software engineering Life cycle processes Project management |
| IEC TS 63049:2017 | Terrestrial photovoltaic (PV) systems - Guidelines for effective quality assurance in PV systems installation, operation and maintenance |
| 08/30150300 DC : 0 | BS ISO 23460 - SPACE PROJECTS - PROGRAMME MANAGEMENT - DEPENDABILITY ASSURANCE REQUIREMENTS |
| 04/30123271 DC : DRAFT OCT 2004 | EN 10340 - STEEL CASTINGS FOR STRUCTURAL USES |
| BS EN 124-4:2015 | Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of steel reinforced concrete |
| 13/30264553 DC : 0 | BS EN 61287-1 ED 3.0 - RAILWAY APPLICATIONS - POWER CONVERTORS INSTALLED ON BOARD ROLLING STOCK - PART 1: CHARACTERISTICS AND TEST METHODS |
| 10/30216687 DC : 0 | BS EN 45545-2 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| 06/30160003 DC : 0 | BS ISO 17712 - FREIGHT CONTAINERS-MECHANICAL SEALS |
| CEI EN 60896-21 : 2005 | STATIONARY LEAD-ACID BATTERIES - PART 21: VALVE REGULATED TYPES - METHODS OF TEST |
| ISO/PAS 28004:2006 | Security management systems for the supply chain Guidelines for the implementation of ISO/PAS 28000 |
| BS EN 54-22:2015 | Fire detection and fire alarm systems Resettable line-type heat detectors |
| PD CEN/TS 15472:2016 | Postal services. Method for measurement of parcel transit time for cross-border parcels within the European Union and EFTA using Tracking and Tracing |
| 14/30294509 DC : 0 | BS EN 12952-1 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 1: GENERAL |
| 12/30254144 DC : 0 | BS EN 15651-5 - SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 5: EVALUATION OF CONFORMITY AND MARKING |
| 16/30332911 DC : 0 | BS EN 14496 - GYPSUM BASED ADHESIVES FOR THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS AND GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| 12/30265289 DC : 0 | BS EN 12050-1 - WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 1: LIFTING PLANTS FOR WASTEWATER CONTAINING FAECAL MATTER |
| OHSAS 18001:2007 | Occupational health and safety management systems. Requirements |
| I.S. EN 15512:2009 | STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN |
| 17/30325430 DC : 0 | BS ISO 25119-4 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 4: PRODUCTION, OPERATION, MODIFICATION AND SUPPORTING PROCESSES |
| BS ISO 9154:2016 | Aerospace. Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa. Procurement specification |
| BS EN 62566:2014 | Nuclear power plants. Instrumentation and control important to safety. Development of HDL-programmed integrated circuits for systems performing category A functions |
| ISO 16228:2017 | Fasteners — Types of inspection documents |
| 07/30151936 DC : 0 | BS EN ISO 17663 - WELDING - GUIDELINES FOR QUALITY REQUIREMENTS FOR HEAT TREATMENT IN CONNECTION WITH WELDING AND ALLIED PROCESSES |
| DD CLC/TS 50537-1:2010 | Railway applications. Mounted parts of the traction transformer and cooling system HV bushing for traction transformers |
| DIN CEN ISO/TS 14907-1;DIN SPEC 91192:2015-12 | ELECTRONIC FEE COLLECTION - TEST PROCEDURES FOR USER AND FIXED EQUIPMENT - PART 1: DESCRIPTION OF TEST PROCEDURES (ISO/TS 14907-1:2015) |
| 17/30355212 DC : 0 | BS ISO 10794 - SPACE SYSTEMS - PROGRAMME MANAGEMENT - MATERIAL, MECHANICAL PARTS AND PROCESSES |
| PREN 13015 : DRAFT 2017 | MAINTENANCE FOR LIFTS AND ESCALATORS - RULES FOR MAINTENANCE INSTRUCTIONS |
| ISO 28000:2007 | Specification for security management systems for the supply chain |
| BS EN 61162-402:2005 | Maritime navigation and radiocommunication equipment and systems. Digital interfaces Multiple talkers and multiple listeners. Ship systems interconnections. Documentation and test requirements |
| 16/30272856 DC : 0 | BS ISO/IEC 40180 - INFORMATION TECHNOLOGY - LEARNING, EDUCATION, AND TRAINING - QUALITY FOR LEARNING, EDUCATION AND TRAINING - FUNDAMENTALS AND REFERENCE FRAMEWORK |
| UNI ISO 29990 : 2011 | LEARNING SERVICES FOR NON-FORMAL EDUCATION AND TRAINING - BASIC REQUIREMENTS FOR SERVICE PROVIDERS |
| ASTM F 2070 : 2000 : R2011 | Standard Specification for Transducers, Pressure and Differential, Pressure, Electrical and Fiber-Optic |
| 11/30213587 DC : 0 | BS EN 1254-6 - COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 6: FITTINGS WITH PUSH-FIT ENDS |
| BS EN 3226:2009 | Aerospace series. Nuts, hexagon, plain, normal height, normal across flats, steel, cadmium plated. Classification: 1100 MPa/235°C |
| PD CEN/TS 16919:2016 | Postal services. Interface and data transfer format for capturing postal automation events IDT-PAE |
| 15/30320130 DC : 0 | BS EN 16855 - WALK-IN COLD ROOMS - DEFINITION, THERMAL INSULATION PERFORMANCE AND TEST METHODS - PART 1: PREFABRICATED COLD ROOM KITS |
| BS EN 16240:2013 | Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings. Requirements and test methods |
| BS EN 4136:2009 | Aerospace series. Bolts, normal bi-hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1100 MPa at ambient temperature)/235°C |
| UNI EN 15012 : 2008 | PLASTICS PIPING SYSTEMS - SOIL AND WASTE DISCHARGE SYSTEMS WITHIN THE BUILDING STRUCTURE - PERFORMANCE CHARACTERISTICS FOR PIPES, FITTINGS AND THEIR JOINTS |
| PD CEN/TR 14245:2014 | Cement. Guidelines for the application of EN 197-2 Conformity Evaluation |
| BS ISO 25841:2017 | Female condoms. Requirements and test methods |
| BIP 0104 : 2008 | ISO 9001:2000 - THE QUALITY MANAGEMENT PROCESS |
| 16/30292328 DC : 0 | BS ISO 27914 - CARBON DIOXIDE CAPTURE, TRANSPORTATION AND GEOLOGICAL STORAGE - GEOLOGICAL STORAGE |
| UNI ISO 13053-1 : 2014 | QUANTITATIVE METHODS IN PROCESS IMPROVEMENT - SIX SIGMA - PART 1: DMAIC METHODOLOGY |
| BS ISO 14300-1:2011 | Space systems. Programme management Structuring of a project |
| 08/30139611 DC : DRAFT JUNE 2008 | BS ISO/IEC 17007 - CONFORMITY ASSESSMENT - GUIDELINES FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT |
| AQAP 160 : 1 | NATO INTEGRATED QUALITY REQUIREMENTS FOR SOFTWARE THROUGHOUT THE LIFE CYCLE |
| ISO/IEC TR 29110-5-2-1:2016 | Systems and software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 5-2-1: Organizational management guidelines |
| BS EN 16001:2009 | Energy management systems. Requirements with guidance for use |
| BS EN 61189-5-4:2015 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies General test methods for materials and assemblies. Solder alloys and fluxed and non-fluxed solid wire for printed board assemblies |
| PD CLC/TR 50506-1:2007 | Railway applications. Communication, signalling and processing systems. Application guide for EN 50129 Cross-acceptance |
| PD CEN/TR 15472:2006 | Postal services. Measurement of transit times for parcels by the use of a track and trace system |
| 16/30338111 DC : 0 | BS EN 13491 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES |
| 04/30092984 DC : DRAFT JAN 2004 | ISO 10005 - QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY PLANS |
| DIN EN ISO 13174:2013-05 | CATHODIC PROTECTION OF HARBOUR INSTALLATIONS (ISO 13174:2012) |
| PD ISO/PAS 12835:2013 | Qualification of casing connections for thermal wells |
| BS EN 15497:2014 | Structural finger jointed solid timber. Performance requirements and minimum production requirements |
| IECQ OD 3802:2015 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - QUALITY SYSTEM REQUIREMENTS FOR MANUFACTURERS SEEKING IECQ LED COMPONENT PRODUCT CERTIFICATES OF CONFORMITY FOR COMPONENT PRODUCT(S) ASSOCIATED WITH LED LIGHTING |
| 12/30264370 DC : 0 | BS EN 14783 - FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
| ANSI/ASSE Z490.1 : 2016 | CRITERIA FOR ACCEPTED PRACTICES IN SAFETY, HEALTH AND ENVIRONMENTAL TRAINING |
| 15/30330354 DC : 0 | BS ISO 20683-1 - AIRCRAFT GROUND EQUIPMENT - DESIGN, TEST AND MAINTENANCE FOR TOWBARLESS TOWING VEHICLES (TLTV) INTERFACED WITH NOSE-LANDING GEAR - PART 1: MAIN-LINE AIRCRAFT |
| UNE-EN 15681-2:2017 | Glass in Building - Basic alumino silicate glass products - Part 2: Product standard |
| I.S. EN 206-1:2002 | CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY (INCLUDING IRISH NATIONAL ANNEX) |
| BIP 0139 : 2013 | AN INTRODUCTION TO ISO/IEC 27001:2013 |
| S.R. OHSAS 18002:2008 | OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - GUIDELINES FOR THE IMPLEMENTATION OF OHSAS 18001:2007 |
| SAE AS 9133 : 2016 | QUALIFICATION PROCEDURE FOR AEROSPACE STANDARD PRODUCTS |
| 13/30277892 DC : 0 | BS EN 62572-3 ED 2.0 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - RELIABILITY STANDARDS - PART 3: LASER MODULES USED FOR TELECOMMUNICATION |
| PD IEC/TR 61850-1:2013 | Communication networks and systems for power utility automation Introduction and overview |
| BS EN 45510-4-10:2000 | Guide for the procurement of power station equipment. Boiler auxiliaries Flue gas denitrification (De-NOx) plant - Section 10: Flue gas denitrification (De-Nox) plant |
| I.S. EN 12815:2001 | RESIDENTIAL COOKERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| ANSI/AAMI ST90:2017 | PROCESSING OF HEALTH CARE PRODUCTS - QUALITY MANAGEMENT SYSTEMS FOR PROCESSING IN HEALTH CARE FACILITIES |
| BS EN ISO 14006:2011 | Environmental management systems. Guidelines for incorporating ecodesign |
| BS ISO/IEC 20741:2017 | Systems and software engineering. Guideline for the evaluation and selection of software engineering tools |
| UNE-EN 1457-1:2013 | Chimneys - Clay/ceramic flue liners - Part 1: Flue liners operating under dry conditions - Requirements and test methods |
| 11/30249097 DC : 0 | BS EN 60947-1:2007+A2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
| UNE-ISO/TS 22003:2015 | Food safety management systems -- Requirements for bodies providing audit and certification of food safety management systems |
| 12/30198107 DC : 0 | BS EN ISO 11133 - MICROBIOLOGY OF FOOD, ANIMAL FEED AND WATER - PREPARATION, PRODUCTION, STORAGE AND PERFORMANCE TESTING OF CULTURE MEDIA |
| 14/30300568 DC : 0 | BS EN 15274 - GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 19114:2005 | GEOGRAPHIC INFORMATION - QUALITY EVALUATION PROCEDURES |
| UNE-ISO/IEC 20000-3:2015 | Information technology. Service management. Part 3: Guidance on scope definition and applicability of ISO/IEC 20000-1 |
| BS ISO 17367:2013 | Supply chain applications of RFID. Product tagging |
| I.S. EN 3-10:2009 | PORTABLE FIRE EXTINGUISHERS - PART 10: PROVISIONS FOR EVALUATING THE CONFORMITY OF A PORTABLE FIRE EXTINGUISHER TO EN 3-7 |
| I.S. EN ISO 10012:2003 | MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT |
| 14/30292260 DC : 0 | BS EN 12326-1 - SLATE AND STONE FOR DISCONTINUOUS ROOFING AND EXTERNAL CLADDING - PART 1: SPECFICIATIONS FOR SLATE AND CARBONATE SLATE |
| 02/713763 DC : DRAFT DEC 2002 | ISO 15840 - SHIPS AND MARINE TECHNOLOGY - STANDARD SPECIFICATION FOR THERMOSETTING RESIN FIBREGLASS PIPE AND FITTINGS TO BE USED FOR MARINE APPLICATIONS |
| ISO/IEC/IEEE 12207:2017 | Systems and software engineering — Software life cycle processes |
| UNE-EN ISO 13127:2013 | Packaging - Child resistant packaging - Mechanical test methods for reclosable child resistant packaging systems (ISO 13127:2012) |
| DIN EN ISO 11607-1:2014-11 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS (ISO 11607-1:2006 + AMD 1.:2014) |
| BS EN 1013 : 2012 | LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| BS EN 50657:2017 | Railways Applications. Rolling stock applications. Software on Board Rolling Stock |
| 14/30311128 DC : 0 | BS EN 14716 - STRETCHED CEILINGS - REQUIREMENTS AND TEST METHODS |
| PREN 14782 : DRAFT 2015 | SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
| 12/30187831 DC : 0 | BS EN 50126-1 - RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 1: GENERIC RAMS PROCESS |
| UNI EN 14695 : 2010 | FLEXIBLE SHEETS FOR WATERPROOFING - REINFORCED BITUMEN SHEETS FOR WATERPROOFING OF CONCRETE BRIDGE DECKS AND OTHER TRAFFICKED AREAS OF CONCRETE - DEFINITIONS AND CHARACTERISTICS |
| DIN EN 13924-2:2014-07 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 2: MULTIGRADE PAVING GRADE BITUMENS |
| DD ENV 13481-6:2002 | Railway applications. Track. Performance requirements for fastening systems Special fastening systems for attenuation of vibration |
| UNE-ISO/TS 9002:2017 | Quality management systems -- Guidelines for the application of ISO 9001:2015 |
| 15/30332579 DC : DRAFT DEC 2015 | BS EN 16954 - AGGLOMERATED STONE - SLABS AND CUT-TO-SIZE PRODUCTS FOR FLOORING AND STAIRS (INTERNAL AND EXTERNAL) |
| 12/30257647 DC : 0 | BS ISO 19900 - PETROLEUM AND NATURAL GAS INDUSTRIES - GENERAL REQUIREMENTS FOR OFFSHORE STRUCTURES |
| 09/30194526 DC : 2009 | BS EN 15331 - CRITERIA FOR DESIGN, MANAGEMENT AND CONTROL OF MAINTENANCE SERVICES FOR BUILDINGS |
| UNI EN 10088-5 : 2009 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and cold-formed products of corrosion-resistant steel for use in construction |
| BS EN 124-3:2015 | Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of steel or aluminium alloys |
| BS EN 14296 : 2015 | SANITARY APPLIANCES - COMMUNAL WASHING TROUGHS |
| 13/30280054 DC : 0 | BS EN 16590-4 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 4: PRODUCTION, OPERATION, MODIFICATION AND SUPPORTING PROCESSES |
| BS ISO 2919 : 2012 | RADIOLOGICAL PROTECTION - SEALED RADIOACTIVE SOURCES - GENERAL REQUIREMENTS AND CLASSIFICATION |
| NF EN 60895 : 2004 | LIVE WORKING - CONDUCTIVE CLOTHING FOR USE AT NOMINAL VOLTAGE UP TO 800 KV A.C. AND +/- 600 KV D.C. |
| ANSI/AAMI/ISO 14937:2009(R2013) | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| BS IEC 61189-5-3 : 2015 | TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-3: GENERAL TEST METHODS FOR MATERIALS AND ASSEMBLIES - SOLDERING PASTE FOR PRINTED BOARD ASSEMBLIES |
| UNI ISO 20252 : 2012 | MARKET, OPINION AND SOCIAL RESEARCH - VOCABULARY AND SERVICE REQUIREMENTS |
| DIN EN 15283-1:2009-12 | Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement (includes Amendment A1:2009) |
| BS TICKITPLUS - KICK START GUIDE : 2011 | KICK START GUIDE, TICKITPLUS - SOFTWARE AND IT QUALITY MANAGEMENT AND CERTIFICATION |
| 12/30265304 DC : 0 | BS EN 124-3 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 3: GULLY TOPS AND MANHOLE TOPS MADE FROM STEEL OR ALUMINIUM ALLOY |
| 15/30280562 DC : 0 | BS EN ISO 16228 - FASTENERS - INSPECTION DOCUMENTS |
| 17/30289082 DC : 0 | BS ISO/IEC 29110-3-2 - SYSTEMS AND SOFTWARE ENGINEERING - LIFECYCLE PROFILES FOR VERY SMALL ENTITIES (VSES) - PART 3-2: CONFORMITY CERTIFICATION SCHEME |
| 02/106709 DC : DRAFT OCT 2002 | PREN 490 - CONCRETE ROOFING TILES AND FITTINGS FOR ROOF COVERING AND WALL CLADDING - PRODUCT SPECIFICATIONS |
| BS ISO 15790:2004 | Graphic technology and photography. Certified reference materials for reflection and transmission metrology. Documentation and procedures for use, including determination of combined standard uncertainty |
| BS ISO/IEC/IEEE 26513:2017 | Systems and software engineering. Requirements for testers and reviewers of information for users |
| BS EN 16475-7:2016 | Chimneys. Accessories Rain caps. Requirements and test methods |
| 02/710115 DC : DRAFT AUG 2002 | PREN 14525 - DUCTILE IRON WIDE TOLERANCE COUPLINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U PE, FIBRE-CEMENT |
| 09/30172965 DC : 0 | BS EN ISO 13628-15 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS |
| 16/30341197 DC : 0 | BS EN 13565-1 - FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| NFPA 1984 : 2016 | RESPIRATORS FOR WILDLAND FIRE-FIGHTING OPERATIONS |
| DIN EN 14587-3:2013-01 | Railway applications - Track - Flash butt welding of rails - Part 3: Welding in association with crossing construction |
| DIN EN ISO 3452-6:2009-04 | NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 6: PENETRANT TESTING AT TEMPERATURES LOWER THAN 10 DEGREE C |
| BS EN 15683-2:2013 | Glass in building. Thermally toughened soda lime silicate channel shaped safety glass Evaluation of conformity. Product standard |
| ISO 7240-2:2017 | Fire detection and alarm systems — Part 2: Fire detection control and indicating equipment |
| 09/30202307 DC : 0 | BS EN 12514-1 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS |
| 03/317065 DC : DRAFT NOV 2003 | ISO/IEC 17025 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABS - AMENDMENT 1 |
| ISO 28278-1:2011 | Glass in building — Glass products for structural sealant glazing — Part 1: Supported and unsupported monolithic and multiple glazing |
| 17/30333753 DC : 0 | BS EN ISO 19650-1 - ORGANIZATION OF INFORMATION ABOUT CONSTRUCTION WORKS - INFORMATION MANAGEMENT USING BUILDING INFORMATION MODELLING - PART 1: CONCEPTS AND PRINCIPLES |
| 17/30309594 DC : 0 | BS IEC 62138 - NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL SYSTEMS IMPORTANT TO SAFETY - SOFTWARE ASPECTS FOR COMPUTER-BASED SYSTEMS PERFORMING CATEGORY B OR C FUNCTIONS |
| 17/30325427 DC : 0 | BS ISO 25119-3 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 3: SERIES DEVELOPMENT, HARDWARE AND SOFTWARE |
| PD ISO/TR 13121:2011 | Nanotechnologies. Nanomaterial risk evaluation |
| 17/30356163 DC : 0 | BS EN 4859 - AEROSPACE SERIES - SENSOR BASED CLAMP LOAD DETERMINATION/HIGH TENSILE BOLTS - TECHNICAL SPECIFICATION |
| PD CEN/TS 14541:2013 | Plastics pipes and fittings. Characteristics for utilisation of non-virgin PVC-U, PP and PE materials |
| UNI EN 16280 : 2013 | BREATH ALCOHOL TEST DEVICES FOR GENERAL PUBLIC - REQUIREMENTS AND TEST METHODS |
| DIN EN 1474-2:2009-02 | Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses |
| 15/30328775 DC : 0 | BS EN 13250 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RAILWAYS |
| UNE-EN 15348:2015 | Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates |
| 13/30255929 DC : 0 | BS EN ISO 7396-1 - MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM |
| 12/30266871 DC : 0 | BS EN 1790 - ROAD MARKING MATERIALS - PREFORMED ROAD MARKINGS |
| UNI EN 15347 : 2008 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF PLASTICS WASTES |
| 02/710860 DC : DRAFT SEP 2002 | BS EN 14532-3 - WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 3: CONFORMITY ASSESSMENT OF WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINIUM ALLOYS |
| BS EN 16280:2012 | Breath alcohol test devices for general public. Requirements and test methods |
| UNI CEI EN ISO/IEC 17065 : 2012 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES CERTIFYING PRODUCTS, PROCESSES AND SERVICES |
| 03/305825 DC : DRAFT APR 2003 | ISO 21368 - ADHESIVES - GUIDELINES FOR THE FABRICATION OF ADHESIVELY BONDED STRUCTURES AND FOR REPORTING PROCEDURES SUITABLE FOR THE RISK EVALUATION OF SUCH STRUCTURES |
| ISO 11137:1995 | Sterilization of health care products Requirements for validation and routine control Radiation sterilization |
| 12/30257208 DC : DRAFT FEB 2012 | BS ISO/IEC 20000-3 - INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 3: GUIDANCE ON SCOPE DEFINITION AND APPLICABILITY OF ISO/IEC 20000-1 |
| 17/30355972 DC : 0 | BS ISO 28862 - PACKAGING - CHILD-RESISTANT PACKAGING - REQUIREMENTS AND TESTING PROCEDURES FOR NON-RECLOSABLE PACKAGES FOR NON-PHARMACEUTICAL PRODUCTS |
| ISO/TR 18532:2009 | Guidance on the application of statistical methods to quality and to industrial standardization |
| 14/30278089 DC : 0 | BS ISO 13007-5 - CERAMIC TILES - GROUTS AND ADHESIVES - PART 5: LIQUID APPLIED WATERPROOFING MEMBRANES FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
| SAE ARP 6196 : 2012 | GAS TURBINE ENGINE TEST FACILITY AUDIT PROCESS |
| 02/560165 DC : DRAFT JAN 2002 | BS EN 556-2 - STERILIZATION OF MEDICAL DEVICES - REQUIREMENTS FOR MEDICAL DEVICES TO BE DESIGNATED 'STERILE' - PART 2: REQUIREMENTS FOR ASEPTICALLY PROCESSED MEDICAL DEVICES |
| ISO 23933:2006 | Aerospace Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135 degrees C/20 684 kPa (275 degrees F /3 000 psi) and 135 degrees C/21 000 kPa (275 degrees F/3 046 psi) Procurement specification |
| BS TICKIT GUIDE : ISSUE 5.5 | A GUIDE TO SOFTWARE QUALITY MANAGEMENT SYSTEM CONSTRUCTION AND CERTIFICATION TO ISO 9001:2000 |
| 16/30320028 DC : 0 | BS ISO 26262-2 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 2: MANAGEMENT OF FUNCTIONAL SAFETY |
| 15/30330357 DC : 0 | BS ISO 20683-2 - AIRCRAFT GROUND EQUIPMENT - DESIGN, TEST AND MAINTENANCE FOR TOWBARLESS TOWING VEHICLES (TLTV) INTERFACED WITH NOSE-LANDING GEAR - PART 2: REGIONAL AIRCRAFT |
| 13/30273036 DC : 0 | BS EN 13859-1 - FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 1: UNDERLAYS FOR DISCONTINUOUS ROOFING |
| ISO/IEC TR 15443-3:2007 | Information technology Security techniques A framework for IT security assurance Part 3: Analysis of assurance methods |
| 05/30133283 DC : DRAFT MAY 2005 | IEC 61190-1-2 ED 2 - ATTACHMENT MATERIALS FOR ELECTRONIC ASSEMBLY - PART 1-2: REQUIREMENTS FOR SOLDERING PASTE FOR HIGH-QUALITY INTERCONNECTS IN ELECTRONICS ASSEMBLY |
| CEI UNI EN ISO/IEC 17020 : 2012 | CONFORMITY ASSESSMENT REQUIREMENTS FOR THE OPERATION OF VARIOUS TYPES OF BODIES PERFORMING INSPECTION |
| CEI EN 61400-3 : 2009 | WIND TURBINES - PART 3: DESIGN REQUIREMENTS FOR OFFSHORE WIND TURBINES |
| I.S. EN 16910-1:2018 | RAILWAY APPLICATIONS - ROLLING STOCK - REQUIREMENTS FOR NON-DESTRUCTIVE TESTING ON RUNNING GEAR IN RAILWAY MAINTENANCE - PART 1: WHEELSETS |
| 17/30357395 DC : DRAFT SEP 2017 | BS EN 14055 - WC AND URINAL FLUSHING CISTERNS |
| 17/30351720 DC : 0 | BS EN ISO 11607-2 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES |
| I.S. EN ISO 13940:2016 | HEALTH INFORMATICS - SYSTEM OF CONCEPTS TO SUPPORT CONTINUITY OF CARE (ISO 13940:2015) |
| CEI UNI EN 45510-5-2 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-2: GAS TURBINES |
| BS 3156-11.0.3(1997) : 1997 AMD 10655 | ANALYSIS OF FUEL GASES - METHODS FOR NON-MANUFACTURED GASES - GENERAL - GUIDELINES TO TRACEABILITY IN ANALYSIS OF NATURAL GAS |
| 17/30345251 DC : 0 | BS ISO 10144 - STEELS FOR THE REINFORCEMENT AND PRESTRESSING OF CONRETE - CERTIFICATION SCHEME FOR STEEL BARS AND WIRES |
| BS ISO 25119-1:2010 | Tractors and machinery for agriculture and forestry. Safety-related parts of control systems. General principles for design and development |
| BS ISO 18436-3:2012 | Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel Requirements for training bodies and the training process |
| 93/408219 DC : MAR 93 | BS 5781 QUALITY ASSURANCE REQUIREMENTS FOR MEASURING EQUIPMENT. PART 2: MEASUREMENT PROCESS CONTROL |
| UNI EN 15564 : 2009 | PRECAST CONCRETE PRODUCTS - RESIN BOUND CONCRETE - REQUIREMENTS AND TEST METHODS |
| UNI CEN/TS 1566-2 : 2012 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - CHORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY |
| PREN 12467 : DRAFT 2010 | FIBRE-CEMENT FLAT SHEETS - PRODUCT SPECIFICATION AND TEST METHODS |
| DIN EN 13924-1:2016-02 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS |
| BS EN 16887:2017 | Leather. Environmental footprint. Product Category Rules (PCR). Carbon footprints |
| BS EN 16497-1:2015 | Chimneys. Concrete System Chimneys Non-balanced flue applications |
| UNI EN ISO 23936-1 : 2009 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS |
| SAE AS 6171/7 : 2016 | TECHNIQUES FOR SUSPECT/COUNTERFEIT EEE PARTS DETECTION BY ELECTRICAL TEST METHODS |
| BS EN 15345:2007 | Plastics. Recycled plastics. Characterization of polypropylene (PP) recyclates |
| CSA ISO/IEC TR 19760 : 2004(R2009) | SYSTEMS ENGINEERING - A GUIDE FOR THE APPLICATION OF ISO/IEC 15288 (SYSTEM LIFE CYCLE PROCESSES) |
| BS PD ISO/TR 14969 : 2004 AMD 15958 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
| CSA CEI/IEC 300.2 : 0 | DEPENDABILITY MANAGEMENT - PART 2: DEPENDABILITY PROGRAMME ELEMENTS AND TASKS |
| UNI CEN ISO/TR 3834-6 : 2012 | QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS - PART 6: GUIDELINES ON IMPLEMENTING ISO 3834 |
| GOST ISO/IEC 15426-1 : 2003 | AUTOMATIC IDENTIFICATION - BAR CODING - LINEAR BAR CODE SYMBOLS VERIFIER - CONFORMITY REQUIREMENTS |
| 01/682010 DC : DRAFT JAN 2002 | BS 7799-2 INFORMATION SECURITY MANAGEMENT - PART 2: SPECIFICATION FOR INFORMATION SECURITY MANAGEMENT SYSTEMS |
| PD CEN/TS 1566-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Guidance for assessment of conformity |
| 12/30250634 DC : 0 | BS EN 13802 - RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS |
| 12/30261889 DC : 0 | BS EN 12420 - COPPER AND COPPER ALLOYS - FORGINGS |
| BS 5750-13:1991 | Quality systems Guide to the application of BS 5750:Part 1 to the development, supply and maintenance of software |
| DEFSTAN 05-95/3(1995) : 1995 | QUALITY SYSTEM REQUIREMENTS FOR THE DESIGN, DEVELOPMENT, SUPPLY AND MAINTENANCE OF SOFTWARE |
| SAE ARP 5374 : 2016 | METHOD OF TESTING PRE-CONDITIONED AIR EQUIPMENT |
| BS ISO 2230:2002 | Rubber products. Guidelines for storage |
| BS 5750-8:1991 | Quality systems Guide to quality management and quality systems elements for services |
| BS ISO 37500:2014 | Guidance on outsourcing |
| 14/30276392 DC : 0 | BS ISO 28007-1 - SHIPS AND MARINE TECHNOLOGY - GUIDELINES FOR PRIVATE MARITIME SECURITY COMPANIES (PMSC) PROVIDING PRIVATELY CONTRACTED ARMED SECURITY PERSONNEL (PCASP) ON BOARD SHIPS (AND PRO FORMA CONTRACT) |
| 11/30213590 DC : 0 | BS EN 1254-8 - COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 8: FITTINGS WITH PRESS ENDS FOR USE WITH PLASTICS AND MULTILAYER PIPES |
| 14/30263100 DC : 0 | BS EN ISO 17989-1 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SUSTAINABILITY - PART 1: PRINCIPLES |
| DIN EN 14587-2:2009-08 | Railway applications - Track - Flash butt welding of rails - Part 2: New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a fixed plant |
| PREN 16510-1 : DRAFT 2013 | RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| 97/703020 DC : 0 | ISO/DIS 3999 - APPARATUS FOR INDUSTRIAL GAMMA RADIOGRAPHY - DESIGN AND TEST CRITERIA |
| DIN EN ISO/IEC 80079-34:2012-03 | EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE (ISO/IEC 80079-34:2011) |
| BS EN 60746-2:2003 | Expression of performance of electrochemical analyzers pH value |
| BS ISO/IEC 33071:2016 | Information technology. Process assessment. An integrated process capability assessment model for Enterprise processes |
| BS ISO 13270:2013 | Steel fibres for concrete. Definitions and specifications |
| 13/30279798 DC : 0 | BS EN 15313 - RAILWAY APPLICATIONS - IN-SERVICE WHEELSET OPERATION REQUIREMENTS - IN-SERVICE AND OFF-VEHICLE WHEELSET MAINTENANCE |
| 05/30132431 DC : DRAFT APR 2005 | EN 13771-2 - COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 2: CONDENSING UNITS |
| 07/30168488 DC : 0 | BS EN 253 - DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PIPE ASSEMBLY OF STEEL SERVICE PIPE, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| 14/30301254 DC : 0 | BS EN 13160-4 - LEAK DETECTION SYSTEMS - PART 4: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR SENSOR BASED LEAK DETECTION SYSTEMS |
| 10/30218982 DC : DRAFT JUNE 2010 | BS EN 14388 - ROAD TRAFFIC NOISE REDUCING DEVICES - SPECIFICATIONS |
| ASTM F 621 : 2012 : R2017 | Standard Specification for Stainless Steel Forgings for Surgical Implants |
| PD CEN/TS 16880:2015 | Service excellence. Creating outstanding customer experiences through service excellence |
| DIN ISO 11040-5:2013-12 | PREFILLED SYRINGES - PART 5: PLUNGER STOPPERS FOR INJECTABLES (ISO 11040-5:2012) |
| 16/30339855 DC : 0 | BS EN 14041 - RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS |
| BS ISO 16355-5:2017 | Applications of statistical and related methods to new technology and product development process Solution strategy |
| UNE-EN 62304:2007 | Medical device software - Software life-cycle processes (IEC 62304:2006) |
| DD CEN/TS 14421:2006 | Hose tail and ferrule for crimping and swaging |
| 06/30150257 DC : 0 | EN 9104-2 - REQUIREMENTS FOR OVERSIGHT OF AEROSPACE QUALITY MANAGEMENT SYSTEM REGISTRATION/CERTIFICATIONS PROGRAMS |
| EN 1254-2:1998 | Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes |
| BS ISO 23409:2011 | Male condoms. Requirements and test methods for condoms made from synthetic materials |
| I.S. EN 50588-1:2017 | MEDIUM POWER TRANSFORMERS 50 HZ, WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV - PART 1: GENERAL REQUIREMENTS |
| 12/30254902 DC : DRAFT JAN 2012 | BS EN 54-10 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 10: FLAME DETECTORS - POINT DETECTORS |
| I.S. CEN TS 12666-2:2006 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| 17/30363842 DC : 0 | BS ISO 21927-2 - SMOKE AND HEAT CONTROL SYSTEMS - PART 2: SPECIFICATION FOR NATURAL SMOKE AND HEAT EXHAUST VENTILATORS |
| 04/30109881 DC : DRAFT MAR 2004 | EN 9104 - REQUIREMENTS FOR AEROSPACE SUPPLIER QUALITY SYSTEM CERTIFICATION REGISTRATION SCHEMES FOR USE BY THE IAQG SECTORS |
| BS EN 3043:2008 | Aerospace series. Fasteners, externally threaded, in heat resisting steel FE PA92HT (A286). Classification: 900 MPa/650 °C, manufacturing method optional. Technical specification |
| ISO 13683:1997 | Sterilization of health care products Requirements for validation and routine control of moist heat sterilization in health care facilities |
| I.S. EN 2043:2013 | AEROSPACE SERIES - METALLIC MATERIALS - GENERAL REQUIREMENTS FOR SEMI-FINISHED PRODUCT QUALIFICATION (EXCLUDING FORGINGS AND CASTINGS) |
| UNE-EN ISO 14006:2011 | Environmental management systems - Guidelines for incorporating ecodesign (ISO 14006:2011) |
| BS EN 62366 : 2008 | MEDICAL DEVICES - APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
| 09/30179091 DC : 0 | BS ISO 26262-2 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 2: MANAGEMENT OF FUNCTIONAL SAFETY |
| PD IEC WT 01:2001 | IEC system for conformity testing and certification of wind turbines. Rules and procedures |
| 04/30116688 DC : DRAFT JUL 2004 | EN 9135 - AEROSPACE SERIES - QUALITY SYSTEMS - SPECIFIC QUALITY REQUIREMENTS FOR NATO SUPPLIERS |
| 12/30265307 DC : 0 | BS EN 124-4 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 4: GULLY TOPS AND MANHOLE TOPS MADE FROM STEEL REINFORCED CONCRETE |
| BS ISO/IEC 29110-3-2:2018 | Systems and software engineering. Lifecycle profiles for Very Small Entities (VSEs) Conformity certification scheme |
| BS ISO 20077-1:2017 | Road Vehicles. Extended vehicle (ExVe) methodology General information |
| BS PD TR 13480-7 : 2002 | METALLIC INDUSTRIAL PIPING - GUIDANCE ON THE USE OF CONFORMITY ASSESSMENT PROCEDURES |
| 14/30231508 DC : 0 | BS ISO 13065 - SUSTAINABILITY CRITERIA FOR BIOENERGY |
| BS EN 1474-3:2008 | Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems Offshore transfer systems |
| PD CEN/TR 15592:2007 | Health services. Quality management systems. Guide for the use of EN ISO 9004:2000 in health services for performance improvement |
| BS EN 74-2:2008 | Couplers, spigot pins and baseplates for use in falsework and scaffolds Special couplers. Requirements and test procedures |
| API Q2 : 2011 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR SERVICE SUPPLY ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| 11/30204176 DC : 0 | BS EN 12209 - BUILDING HARDWARE - MECHANICALLY OPERATED LOCKS AND LOCKING PLATES - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 17663:2009 | Welding. Quality requirements for heat treatment in connection with welding and allied processes |
| DD ENV 1455-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Acrylonitrile-butadiene- styrene (ABS) Guidance for the assessment of conformity |
| API 5L CHINESE : 2012 | SPECIFICATION FOR LINE PIPE |
| EN 1254-3:1998 | Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes |
| 09/30207865 DC : 0 | BS EN 13859-1 - FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 1: UNDERLAYS FOR DISCONTINUOUS ROOFING |
| S.R. CEN/TS 1565-2:2012 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - STYRENE-COPOLYMER BLENDS (SAN+PVC) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| 06/30150260 DC : 0 | EN 9104-3 - REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM (AQMS) - PART 3: AUDITOR TRAINING AND QUALIFICATION |
| 04/100443 DC : DRAFT JAN 2004 | |
| 09/30207531 DC : 0 | BS EN ISO 14534 - OPHTHALMIC OPTICS - CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - FUNDAMENTAL REQUIREMENTS |
| UNE-EN 14587-2:2010 | Railway applications - Track - Flash butt welding of rails - Part 2: New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a fixed plant |
| UNE-EN 12101-7:2013 | Smoke and heat control systems - Part 7: Smoke duct sections |
| 13/30252783 DC : 0 | BS EN 50502 - RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS |
| BS ISO/IEC 21827:2008 | Information technology. Security techniques. Systems security engineering. Capability maturity model (SSE- CMM) |
| BS EN 1337-8:2007 | Structural bearings Guide bearings and restraint bearings |
| BS EN 14636-2:2009 | Plastics piping systems for non-pressure drainage and sewerage. Polyester resin concrete (PRC) Manholes and inspection chambers |
| CEI CLC/TS 50537-4 : 2011 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 4: GAS AND LIQUID ACTUATED (BUCHHOLZ) RELAY FOR LIQUID IMMERSED TRANSFORMERS AND REACTORS WITH CONSERVATOR FOR RAIL VEHICLES |
| BS ISO/IEC 27006:2015 | Information technology. Security techniques. Requirements for bodies providing audit and certification of information security management systems |
| IEC 60571:2012 | Railway applications - Electronic equipment used on rolling stock |
| 01/713262 DC : DRAFT SEP 2001 | PREN 14268 - IRRIGATION TECHNIQUES - METRES FOR IRRIGATION WATER |
| BS EN 45510-4-8:2000 | Guide for the procurement of power station equipment. Boiler auxiliaries Dust handling plant - Section 8: Dust handling |
| UNE-EN 124-5:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials |
| PD CEN/TS 1555-7:2013 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Guidance for the assessment of conformity |
| UNE-EN 61400-2:2015 | Wind turbines - Part 2: Small wind turbines |
| UNE-EN 15358:2011 | Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels |
| UNE-EN 3-10:2010 | Portable fire extinguishers - Part 10: Provisions for evaluating the conformity of a portable fire extinguisher to EN 3-7 |
| 10/30234607 DC : 0 | BS EN 14422 - CLAMP TYPE COUPLING ASSEMBLIES FOR LPG TRANSFER HOSES |
| PD ISO/TS 16949:2009 | Quality management systems. Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations |
| BS EN 4127:2009 | Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambient temperature)/ 425 °C |
| 01/707284 DC : DRAFT APR 2001 | IAQS 9100:2001 - AEROSPACE - QUALITY MANAGEMENT SYSTEMS |
| BS ISO 24408:2005 | Ships and marine technology. Position-indicating lights for life-saving appliances. Testing, inspection, and marking of production units |
| UNI EN 54-24 : 2008 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: COMPONENTS OF VOICE ALARM SYSTEMS - LOUDSPEAKERS |
| BS EN 15644:2008 | Traditionally designed prefabricated stairs made of solid wood. Specifications and requirements |
| 12/30271063 DC : 0 | PD ISO/IEC/TS 17021-3 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEMS |
| UNI EN 1254-8 : 2012 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 8: FITTINGS WITH PRESS ENDS FOR USE WITH PLASTICS AND MULTILAYER PIPES |
| 04/30110333 DC : DRAFT MAR 2004 | EN 14889-2 - FIBRES FOR CONCRETE - PART 2: POLYMER FIBRES - DEFINITION, SPECIFICATIONS AND CONFORMITY |
| UNE-EN 16647:2016 | Fireplaces for liquid fuels - Decorative appliances producing a flame using alcohol based or gelatinous fuel - Use in private households |
| 09/30179548 DC : DRAFT AUG 2009 | BS ISO 10904 - FIBRE-CEMENT CORRUGATED SHEETS AND FITTINGS FOR ROOFING AND CLADDING |
| BS EN 1474-2:2008 | Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems Design and testing of transfer hoses |
| BS EN 61069-8:2016 | Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment Assessment of other system properties |
| DD ENV 1519-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE) Guidance for the assessment of conformity |
| I.S. EN 3388:2009 | AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION 1275 MPA/650 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
| 17/30358995 DC : 0 | BS ISO 45001 - OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| S.R. CEN TR 15592:2007 | HEALTH SERVICES - QUALITY MANAGEMENT SYSTEMS - GUIDE FOR THE USE OF EN ISO 9004:2000 IN HEALTH SERVICES FOR PERFORMANCE IMPROVEMENT |
| BS EN 15221-5:2011 | Facility management Guidance on facility management processes |
| 17/30364785 DC : 0 | BS EN 4868 - AEROSPACE SERIES - ANODIC ELECTRODEPOSITION OF PRIMER |
| DD CEN/TS 14773:2004 | Postal services. Quality of service. Measurement of loss and substantial delay of priority and first class single piece mail using a survey of test letters |
| I.S. EN 1457-1:2012 | CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 1: FLUE LINERS OPERATING UNDER DRY CONDITIONS - REQUIREMENTS AND TEST METHODS |
| UNE-ISO 20858:2012 | Ships and marine technology. Maritime port facility security assessments and security plan development |
| PD CEN ISO/TR 13881:2011 | Petroleum and natural gas industries. Classification and conformity assessment of products, processes and services |
| BS EN 15322:2013 | Bitumen and bituminous binders. Framework for specifying cut-back and fluxed bituminous binders |
| UNE-EN ISO 16904:2016 | Petroleum and natural gas industries - Design and testing of LNG marine transfer arms for conventional onshore terminals (ISO 16904:2016) |
| AAMI ISO TIR 14969 : 2004 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
| 09/30212929 DC : 0 | BS EN 61850-4 - COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 4: SYSTEM AND PROJECT MANAGEMENT |
| BS TICKITPLUS - ASSESSORS & PRACTITIONER : 2011 | REQUIREMENTS FOR ASSESSORS AND PRACTITIONERS - THE TICKITPLUS SCHEME |
| BS ISO 11077:2014 | Aircraft ground equipment. De-icers. Functional requirements |
| 12/30272385 DC : 0 | BS EN 1263-1 - SAFETY NETS - PART 1: SAFETY REQUIREMENTS, TEST METHODS |
| UNE-ISO 28004:2014 | Security management systems for the supply chain. Guidelines for the implementation of ISO 28000 |
| BS EN 2755:2009 | Aerospace series. Bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Elevated load at ambient temperature. Technical specification |
| AAMI ISO 15882 : 2008 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS |
| MIL-STD-3004 Revision D:2014 | QUALITY ASSURANCE/SURVEILLANCE FOR FUELS, LUBRICANTS AND RELATED PRODUCTS |
| 14/30291624 DC : 0 | BS ISO 21927-8 - SMOKE AND HEAT CONTROL SYSTEMS - PART 8: SMOKE CONTROL DAMPERS |
| 10/30197293 DC : 0 | BS ISO 14300-2 - SPACE SYSTEMS - PROGRAMME MANAGEMENT - PART 2: PRODUCT ASSURANCE |
| BS EN 12101-8:2011 | Smoke and heat control systems Smoke control dampers |
| BIS IS/ISO/IEC 17025 : 2005 AMD 1 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| DD ENV 61400-1:1995 | Wind turbine generator systems Safety requirements |
| 06/30147326 DC : DRAFT MAR 2006 | EN 9104 - REQUIREMENTS FOR OVERSIGHT OF AEROSPACE QUALITY MANAGEMENT SYSTEM REGISTRATION/CERTIFICATIONS PROGRAMS |
| BS ISO 23460:2011 | Space projects. Programme management. Dependability assurance requirements |
| 12/30265313 DC : 0 | BS EN 124-6 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE FROM POLYPROPYLENE (PP) OR POLYVINYL-CHLORIDE (PVC-U) |
| BS EN 15228:2009 | Structural timber. Structural timber preservative treated against biological attack |
| PD IEC/TR 62476:2010 | Guidance for evaluation of products with respect to substance-use restrictions in electrical and electronic products |
| I.S. EN 4071:2009 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| BS EN 45510-6-9:2000 | Guide for the procurement of power station equipment. Turbine auxiliaries Cooling water systems - Section 9: Cooling water systems |
| 16/30329425 DC : 0 | BS EN 12566-4 - SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 4: SEPTIC TANKS ASSEMBLED IN SITU FROM PREFABRICATED KITS |
| UNI EN 14592 : 2012 | TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
| CSA ISO 9000-4 : 0 | QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - GUIDE TO DEPENDABILITY PROGRAMME MANAGEMENT |
| BS EN 15824:2017 | Specifications for external renders and internal plasters based on organic binders |
| PD ISO/IEC TR 90005:2008 | Systems engineering. Guidelines for the application of ISO 9001 to system life cycle processes |
| 07/30166095 DC : 0 | EN 124 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS |
| I.S. EN ISO 11607-2:2017 & LC:2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES (ISO 11607-2:2006, INCLUDING AMD 1:2014) |
| 03/301732 DC : DRAFT JAN 2003 | EN 9121 - AEROSPACE SERIES - QUALITY SYSTEMS - QUALITY SYSTEM ASSESSMENT APPLICABLE TO STOCKIST DISTRIBUTORS |
| ISO 14488:2007 | Particulate materials — Sampling and sample splitting for the determination of particulate properties |
| 12/30258217 DC : 0 | BS EN 13707 - FLEXIBLE SHEETS FOR WATERPROOFING - REINFORCED BITUMEN SHEETS FOR ROOF WATERPROOFING - DEFINITIONS AND CHARACTERISTICS |
| I.S. EN 1254-5:1998 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 5: FITTINGS WITH SHORT ENDS FOR CAPILLARY BRAZING TO COPPER TUBES |
| BS EN 45510-4-4:2002 | Guide for the procurement of power station equipment. Boiler auxiliaries Fuel preparation equipment |
| DD ISO/TS 22559-4:2011 | Safety requirements for lifts (elevators) Global conformity assessment procedures (GCAP). Certification and accreditation requirements |
| UNI EN 15331 : 2011 | CRITERIA FOR DESIGN, MANAGEMENT AND CONTROL OF MAINTENANCE SERVICES FOR BUILDINGS |
| 17/30359429 DC : 0 | BS ISO 10004 - QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR MONITORING AND MEASURING |
| 13/30281051 DC : 0 | BS EN 14680 - ADHESIVES FOR NON-PRESSURE THERMOPLASTIC PIPING SYSTEMS - SPECIFICATIONS |
| CLC/TS 61111:2006 | Matting of insulating material for electrical purposes |
| CSA ISO TR 10013 : 2001 : R2016 | GUIDELINES FOR QUALITY MANAGEMENT SYSTEM DOCUMENTATION |
| BS EN 50206-1:2010 | Railway applications. Rolling stock. Pantographs. Characteristics and tests Pantographs for main line vehicles |
| 09/30185992 DC : 0 | BS EN 13674-1 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| I.S. EN 50629:2015 | ENERGY PERFORMANCE OF LARGE POWER TRANSFORMERS (U[M] > 36 KV OR S[R] >= 40 MVA) |
| I.S. EN 16271:2012 | VALUE MANAGEMENT - FUNCTIONAL EXPRESSION OF THE NEED AND FUNCTIONAL PERFORMANCE SPECIFICATION - REQUIREMENTS FOR EXPRESSING AND VALIDATING THE NEED TO BE SATISFIED WITHIN THE PROCESS OF PURCHASING OR OBTAINING A PRODUCT |
| AAMI IEC 62366 : 2015 | MEDICAL DEVICES - APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
| 12/30249475 DC : 0 | BS ISO 16404 - SPACE SYSTEMS - PROGRAMME MANAGEMENT - REQUIREMENTS MANAGEMENT |
| BS ISO 4118:2016 | Air cargo. Non-certified lower deck containers. Design and testing |
| 12/30257305 DC : 0 | BS EN 16392-2 - NON-DESTRUCTIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC PHASED ARRAY SYSTEMS - PART 2: PROBES |
| BS EN 54-25:2008 | Fire detection and fire alarm systems Components using radio links |
| 16/30338243 DC | BS EN 1457-2. Chimneys. Clay/ceramic flue liners. Part 2. Flue liners operating under wet conditions. Requirements and test methods |
| PREN 13252 : DRAFT 2015 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN DRAINAGE SYSTEMS |
| 03/318309 DC : DRAFT OCT 2003 | IEC 61196-1-1 - COAXIAL COMMUNICATION CABLES - PART 1-1: CAPABILITY APPROVAL FOR COAXIAL COMMUNICATION CABLES - GENERIC SPECIFICATION |
| DIN EN 14963:2006-12 | Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods |
| CSA IEC 62366 : 2014 | MEDICAL DEVICES - APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
| EN ISO 11135:2014 | Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 11135:2014) |
| PREN 12451 : DRAFT 2010 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS |
| INCITS ISO 19114 : 2003(R2013) | GEOGRAPHIC INFORMATION - QUALITY EVALUATION PROCEDURES |
| PD CEN/TS 12201-7:2014 | Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) Guidance for the assessment of conformity |
| PREN 12966 : DRAFT 2013 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS |
| PREN 1453-1 : DRAFT 2014 | PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES AND THE SYSTEM |
| BS EN 54-7:2001 | Fire detection and fire alarm systems Smoke detectors. Point detectors using scattered light, transmitted light or ionization |
| UNI CEI EN ISO/IEC 15423 : 2011 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE SCANNER AND DECODER PERFORMANCE TESTING |
| ISO 16412:2005 | Air cargo equipment — Air cargo pallets — Utilization guidelines |
| 10/30207674 DC : DRAFT JUNE 2010 | BS ISO 14300-1 - SPACE SYSTEMS - PROGRAMME MANAGEMENT - PART 1: STRUCTURING OF A PROJECT |
| PREN 13250 : DRAFT 2015 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RAILWAYS |
| S.R. CEN/TR 14245:2014 | CEMENT - GUIDELINES FOR THE APPLICATION OF EN 197-2 CONFORMITY EVALUATION |
| I.S. ISO 10011-1:1991 | GUIDELINES FOR AUDITING QUALITY SYSTEMS - PART 1: AUDITING |
| UNI EN 13245-2 : 2009 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 2: PVC-U PROFILES AND PVC-UE PROFILES FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES |
| BS ISO 4642-2:2015 | Rubber and plastics hoses, non-collapsible, for fire-fighting service Semi-rigid hoses (and hose assemblies) for pumps and vehicles |
| 15/30299934 DC : DRAFT MAY 2015 | BS ISO 24516-1 - GUIDELINES FOR MANAGEMENT OF ASSETS OF WATER SUPPLY AND WASTEWATER SYSTEMS - PART 1: DRINKING WATER DISTRIBUTION NETWORKS |
| XP PREN 9000-1 : 1999 XP | AEROSPACE SERIES - AEROSPACE INDUSTRY QUALITY SYSTEM - PART 1: REQUIREMENTS APPLICABLE TO SUPPLIERS |
| 11/30238648 DC : DRAFT FEB 2011 | BS EN 16240 - LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| BS EN 4819:2012 | Aerospace series. Contact Memory Button (CMB) tags intended for aircraft use |
| XP PREN 9120 : 2004 XP | AEROSPACE SERIES - QUALITY SYSTEMS - MODEL FOR QUALITY ASSURANCE APPLICABLE TO STOCKIST DISTRIBUTORS |
| BS EN 60383-1:1998 | Insulators for overhead lines with a nominal voltage above 1000 V Ceramic or glass insulator units for a.c. systems. Definitions, test methods and acceptance criteria |
| 07/30164110 DC : 0 | BS EN 9131 - AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - NONCONFORMANCE DOCUMENTATION |
| PREN 14891 : DRAFT 2014 | LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
| 04/19985213 DC : DRAFT NOV 2004 | ISO 19902 - PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES |
| BS ISO 21789:2009 | Gas turbine applications — Safety |
| ISO 20077-1:2017 | Road Vehicles — Extended vehicle (ExVe) methodology — Part 1: General information |
| CAN/CSA-ISO/IEC 15944-9:16 | Information technology Business Operational View Part 9: Business transaction traceability framework for commitment exchange (Adopted ISO/IEC 15944-9:2015, first edition, 2015-10-01) |
| BS EN 4075:2008 | Aerospace series. Screws, pan head, offset cruciform recess, threaded to head, in corrosion resisting steel, passivated. Classification: 490 MPa (at ambient temperature) / 425 °C |
| 02/647836 DC : DRAFT OCT 2002 | BS ISO/IEC 15504-4 - INFORMATION TECHNOLOGY - PROCESS ASSESSMENT - PART 4: GUIDANCE ON USE FOR PROCESS IMPROVEMENT AND PROCESS CAPABILITY DETERMINATION |
| BS ISO/IEC 19796-3:2009 | Information technology. Learning, education and training. Quality management, assurances and metrics Reference methods and metrics |
| API 2SC : 2010 | MANUFACTURE OF STRUCTURAL STEEL CASTINGS FOR PRIMARY OFFSHORE APPLICATIONS |
| BS ISO/IEC 15426-2:2015 | Information technology. Automatic identification and data capture techniques. Bar code verifier conformance specification Two-dimensional symbols |
| 03/306635 DC : DRAFT APR 2003 | EN 13674-2 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| CSA E61496.1 : 2004 : R2013 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS |
| BS EN 2786:2008 | Aerospace series. Electrolytic silver plating of fasteners |
| PD CR 14269:2001 | Chemicals used for treatment of water intended for human consumption. Guidelines for the purchase of products |
| CSA ISO/IEC 25010 : 2012 | SYSTEMS AND SOFTWARE ENGINEERING - SYSTEMS AND SOFTWARE QUALITY REQUIREMENTS AND EVALUATION (SQUARE) - SYSTEM AND SOFTWARE QUALITY MODELS |
| UNE-EN ISO 13408-3:2011 | Aseptic processing of health care products - Part 3: Lyophilization (ISO 13408-3:2006) |
| 14/30257644 DC : 0 | BS EN ISO 13485 - MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR REGULATORY PURPOSES |
| BS ISO/IEC TR 15504-3 : 2004 | INFORMATION TECHNOLOGY - PROCESS ASSESSMENT - PART 3: GUIDANCE ON PERFORMING AN ASSESSMENT |
| IEC 62430:2009 | Environmentally conscious design for electrical and electronic products |
| CSA N286.7 : 2016 | QUALITY ASSURANCE OF ANALYTICAL, SCIENTIFIC, AND DESIGN COMPUTER PROGRAMS |
| BS ISO/IEC 15426-1:2006 | Information technology. Automatic identification and data capture techniques. Bar code verifier conformance specification Linear symbols |
| ISO 9383:1995 | Products in fibre-reinforced cement Short corrugated or asymmetrical section sheets and fittings for roofing |
| ISO/IEC/IEEE 15288:2015 | Systems and software engineering — System life cycle processes |
| 08/30160045 DC : DRAFT APR 2008 | BS ISO 22006 - QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR THE APPLICATION OF ISO 9001:2000 IN CROP PRODUCTION |
| IEEE DRAFT 15288 : 0 | SOFTWARE AND SYSTEMS ENGINEERING - SYSTEM LIFE CYCLE PROCESSES |
| ANSI/AAMI EQ89:2015 | GUIDANCE FOR THE USE OF MEDICAL EQUIPMENT MAINTENANCE STRATEGIES AND PROCEDURES |
| DIN EN 14528:2015-10 | BIDETS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| AAMI ISO 13408-1 : 2008 : R2011 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS |
| EN ISO/TS 15876-7 : 2003 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTYLENE (PB) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| API 625 : 2010 | TANK SYSTEMS FOR REFRIGERATED LIQUEFIED GAS STORAGE |
| 14/30300565 DC : 0 | BS EN 15275 - STRUCTURAL ADHESIVES - CHARACTERISATION OF ANAEROBIC ADHESIVES FOR CO-AXIAL METALLIC ASSEMBLY IN BUILDING AND CIVIL ENGINEERING STRUCTURES |
| S.R. CEN/TS 13598-3:2012 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE)(PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: GUIDANCE FOR ASSESSMENT OF CONFORMITY |
| BS EN 54-30:2015 | Fire detection and fire alarm systems Multi-sensor fire detectors. Point detectors using a combination of carbon monoxide and heat sensors |
| UNE-EN 50405:2016 | Railway applications - Current collection systems - Pantographs, testing methods for contact strips |
| ISO/TR 24094:2006 | Analysis of natural gas — Validation methods for gaseous reference materials |
| SAE ARP 6178 : 2011 | FRAUDULENT/COUNTERFEIT ELECTRONIC PARTS - TOOL FOR RISK ASSESSMENT OF DISTRIBUTORS |
| BS EN 15389:2008 | Industrial valves. Performance characteristics of thermoplastic valves when used as construction products |
| CSA ISO/IEC 20000-2 : 2013 : R2017 | INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 2: GUIDANCE ON THE APPLICATION OF SERVICE MANAGEMENT SYSTEMS |
| 07/30090385 DC : 0 | ISO 13408-1 - ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS |
| CSA Z11135-1 : 2009 : R2014 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| UNE-ISO/IEC 17007:2010 | Conformity assessment. Guidance for drafting normative documents suitable for use for conformity assessment |
| BS EN 45510-7-2:2000 | Guide for the procurement of power station equipment. Pipework and valves Boiler and high pressure valves - Section 2: Boiler and high pressure valves |
| 07/30165636 DC : 0 | BS EN 4636 - AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK HEAD, SIX LOBES RECESS, SHORT THREAD, IN TITANIUM ALLOY TI-P64001, WITH ALUMINIUM PIGMENTED COATING - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| BS HB10198(2001) : 2001 | IMPLEMENTING ISO 9000:2000 |
| NF ISO 16412 : 2006 | AIR CARGO EQUIPMENT - AIR CARGO PALLETS - UTILIZATION GUIDELINES |
| CSA ISO 14937 : 2011 : R2016 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA ISO 10014 : 2006 : INC : COR 1 : 2016 : R201100 | QUALITY MANAGEMENT - GUIDELINES FOR REALIZING FINANCIAL AND ECONOMIC BENEFITS |
| CSA B480 : 2002 : R2013 | CUSTOMER SERVICE STANDARD FOR PEOPLE WITH DISABILITIES |
| UNI EN 1329-1 : 2014 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| DIN EN 16001 E : 2009 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| DIN EN 15221-5:2011-12 | Facility Management - Part 5: Guidance on Facility Management processes |
| CSA N292.5 : 2011 | GUIDELINE FOR THE EXEMPTION OR CLEARANCE FROM REGULATORY CONTROL OF MATERIALS THAT CONTAIN, OR POTENTIALLY CONTAIN, NUCLEAR SUBSTANCES |
| ASTM F 2581 : 2012 | Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225) |
| AAMI ISO 13408-6 : 2005 : INC : AMD 1 : 2013 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 6: ISOLATOR SYSTEMS |
| BS EN 14535-2:2011 | Railway applications. Brake discs for railway rolling stock Brake discs mounted onto the wheel, dimensions and quality requirements |
| CSA ISO/IEC 10967-2 : 2002 : R2011 | INFORMATION TECHNOLOGY - LANGUAGE INDEPENDENT ARITHMETIC - PART 2: ELEMENTARY NUMERICAL FUNCTIONS |
| UNE-EN 14528:2016 | Bidets - Functional requirements and test methods |
| DIN EN 16153:2015-05 | LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| DIN EN 1474-3:2009-02 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 3: OFFSHORE TRANSFER SYSTEMS |
| UNI CEN/TS 16555-1 : 2013 | INNOVATION MANAGEMENT - PART 1: INNOVATION MANAGEMENT SYSTEM |
| DIN ISO 9152:2005-11 | AEROSPACE - BOLTS, WITH MJ THREADS, IN TITANIUM ALLOYS, STRENGTH CLASS 1100 MPA - PROCUREMENT SPECIFICATION |
| UNI ISO 30301 : 2013 | INFORMATION AND DOCUMENTATION - MANAGEMENT SYSTEMS FOR RECORDS - REQUIREMENTS |
| ASTM F 1713 : 2008 | Standard Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications (UNS R58130) |
| ASTM F 2444 : 2004 : R2012 | Standard Practice for Damage Prevention of Bearings, and Bearing Components Through Proper Handling Techniques |
| CAN/CSA-E432-2-98 (R2017) | Safety Specifications for Incandescent Lamps - Part 2: Tungsten Halogen Lamps for Domestic and Similar General Lighting Purposes (adopted IEC 432-2:1994, first edition, including Amendment 1:1996 and Amendment 2:1997, with Canadian deviations) | Prescriptions de sécurité pour lampes à incandescence - Partie 2: Lampes tungstène-halogène pour usage domestique et éclairage général similaire (norme CEI 432-2:1994 adoptée, première édition, avec l\'amendement 1:1996 and l\'amendement 2:1997, avec exigences propres au Canada) |
| SAE ARP 6328 : 2016 | GUIDELINE FOR DEVELOPMENT OF COUNTERFEIT ELECTRONIC PARTS; AVOIDANCE, DETECTION, MITIGATION, AND DISPOSITION SYSTEMS |
| CSA Z17665-1:09 (R2019) | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (Adopted ISO 17665-1:2006, first edition, 2006-08-15, with Canadian deviations) |
| ASTM F 2581 : 2012 : R2017 | Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225) |
| ISO 21247:2005 | Combined accept-zero sampling systems and process control procedures for product acceptance |
| I.S. EN 61069-1:2016 | INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 1: TERMINOLOGY AND BASIC CONCEPTS |
| SAE AS 7001 : 2017 | NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) PROGRAM DESCRIPTION |
| S.R. CEN TS 15511:2008 | POSTAL SERVICES - QUALITY OF SERVICE - INFORMATION AVAILABLE ON POSTAL SERVICES |
| PREN 13257 : DRAFT 2015 | GEOTEXTILES AND GEOTEXTILE-RELATED DOCUMENTS - CHARACTERISTICS REQUIRED FOR USE IN SOLID WASTE DISPOSALS |
| CSA ISO 10003 : 2008 | QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR DISPUTE RESOLUTION EXTERNAL TO ORGANIZATIONS |
| 17/30359426 DC : 0 | BS ISO 10003 - QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR DISPUTE RESOLUTION EXTERNAL TO ORGANIZATIONS |
| NORSOK D-002 : 2013 | WELL INTERVENTION EQUIPMENT |
| ASTM F 2091 : 2015 : REDLINE | Standard Specification for Acetabular Prostheses |
| ISO 14470:2011 | Food irradiation — Requirements for the development, validation and routine control of the process of irradiation using ionizing radiation for the treatment of food |
| PREN 14688 : DRAFT 2014 | SANITARY APPLIANCES - WASH BASINS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| PREN 13253 : DRAFT 2015 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN EROSION CONTROL WORKS (COASTAL PROTECTION, BANK REVETMENTS) |
| DIN CEN/TS 15472;DIN SPEC 16590:2016-08 | POSTAL SERVICES - METHOD FOR MEASUREMENT OF PARCEL TRANSIT TIME FOR CROSS-BORDER PARCELS WITHIN THE EUROPEAN UNION AND EFTA USING TRACKING AND TRACING |
| UNI EN 13369 : 2013 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| CEI UNI ISO/IEC 17007 : 2012 | CONFORMITY ASSESSMENT - GUIDANCE FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT |
| IEC TR 61334-1-2:1997 | Distribution automation using distribution line carrier systems - Part 1-2: General considerations - Guide for specification |
| CEI UNI EN ISO 15426-2 : 2012 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE VERIFIER CONFORMANCE SPECIFICATION - PART 2: TWO-DIMENSIONAL SYMBOLS |
| UNI ISO 10003 : 2008 | QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR DISPUTE RESOLUTION EXTERNAL TO ORGANIZATIONS |
| SAE J 20-2 : 2018 | COOLANT HOSE - NORMAL SERVICE TYPE CONVOLUTED, WIRE SUPPORT HOSE (SUPPLEMENT TO SAE J20 FOR GOVERNMENT USE REPLACING PART OF MS51008) |
| AAMI IEC 62304 : 2006 | MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE CYCLE PROCESSES |
| SAE AS 9103 : 2012 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - VARIATION MANAGEMENT OF KEY CHARACTERISTICS |
| NF EN 4499 : 2009 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK REDUCED HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, WITH ALUMINIUM PIGMENTED COATING - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| ASTM F 139 : 2012 | Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673) |
| ASTM F 998 : 2012 : R2018 | Standard Specification for Centrifugal Pump, Shipboard Use |
| CSA S473 : 2004 | STEEL STRUCTURES |
| PREN 17069-1 : DRAFT 2017 | RAILWAY APPLICATIONS - SYSTEMS AND PROCEDURES FOR CHANGE OF TRACK GAUGE - PART 1: AUTOMATIC VARIABLE GAUGE SYSTEMS |
| API Q1 SPANISH : 2013 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR MANUFACTURING ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRY |
| EN 50588-1:2017 | Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV - Part 1: General requirements |
| ISO 27025:2010 | Space systems — Programme management — Quality assurance requirements |
| NFPA 1991 : 2016 | Standard on Vapor-Protective Ensembles for Hazardous Materials Emergencies |
| DD ENV 1401-2:2001 | Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinylchloride) (PVC-U) Guidance for assessment of conformity |
| ISO 9635-1:2014 | Agricultural irrigation equipment Irrigation valves Part 1: General requirements |
| NFPA 1951 : 2013 | PROTECTIVE ENSEMBLES FOR TECHNICAL RESCUE INCIDENTS |
| AAMI ISO 11607-2 : 2006 : R2010 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING, AND ASSEMBLY PROCESSES |
| BS EN ISO 12944-4:2017 | Paints and varnishes. Corrosion protection of steel structures by protective paint systems Types of surface and surface preparation |
| IEC TS 62239-2:2017 | Process management for avionics - Management plan - Part 2: Preparation and maintenance of an electronic COTS assembly management plan |
| CEI UNI EN ISO/IEC 17011 : 2008 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR ACCREDITATION BODIES ACCREDITING CONFORMITY ASSESSMENT BODIES |
| CEI UNI EN ISO 50001 : 2012 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| ISO/IEC 33063:2015 | Information technology — Process assessment — Process assessment model for software testing |
| BS EN ISO 12679:2015 | Thermal spraying. Recommendations for thermal spraying |
| IEC TS 62844:2016 | Guidelines for quality and risk assessment for nano-enabled electrotechnical products |
| CSA Z24511 : 2010 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE MANAGEMENT OF WASTEWATER UTILITIES AND FOR THE ASSESSMENT OF WASTEWATER SERVICES |
| IEC 62278:2002 | Railway applications - Specification and demonstration of reliability, availability, maintainability and safety (RAMS) |
| BS EN 61174:2015 | Maritime navigation and radiocommunication equipment and systems. Electronic chart display and information system (ECDIS). Operational and performance requirements, methods of testing and required test results |
| BS EN 61190-1-3 : 2007 | ATTACHMENT MATERIALS FOR ELECTRONIC ASSEMBLY - PART 1-3: REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDERS FOR ELECTRONIC SOLDERING APPLICATIONS |
| ISO 15378:2017 | Primary packaging materials for medicinal products — Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) |
| 16/30322240 DC : 0 | BS EN 14535-2 - RAILWAY APPLICATIONS - BRAKE DISCS FOR RAILWAY ROLLING STOCK - PART 2: BRAKE DISCS MOUNTED ONTO THE WHEEL, DIMENSIONS AND QUALITY REQUIREMENTS |
| ISO 18758-2:2018 | Mining and earth-moving machinery — Rock drill rigs and rock reinforcement rigs — Part 2: Safety requirements |
| DIN EN ISO 15175:2011-09 | SOIL QUALITY - CHARACTERIZATION OF SOIL RELATED TO GROUNDWATER PROTECTION |
| I.S. CLC/TS 61111:2006 | MATTING OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES |
| IECQ 03-3-2:2014 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PRODECURE - PART 3-2: IECQ APPROVED COMPONENT PRODUCTS, RELATED MATERIALS & ASSEMBLIES SCHEME, IECQ APPROVED COMPONENT - AUTOMOTIVE QUALIFICATION PROGRAMME (IECQ AC-AQP) |
| DIN EN 14688:2015-10 | SANITARY APPLIANCES - WASH BASINS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| SAE AS 6414 : 2017 | MANUFACTURING PROCESSING REQUIREMENTS FOR MOLDED ELASTOMER COMPONENTS USED IN AEROSPACE APPLICATIONS |
| AEP-4495 : 2016 | GUIDANCE FOR THE PROCUREMENT OF LASER EYE PROTECTION (LEP) FOR THE INDIVIDUAL MILITARY USER |
| BS 7520:1995 | Guide to quality assurance plans for tools for live working |
| UNE-EN 12764:2016 | Sanitary appliances - Specification for whirlpool baths |
| I.S. EN 61189-5:2006 | TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5: TEST METHODS FOR PRINTED BOARD ASSEMBLIES |
| 15/30329856 DC : 0 | BS EN 14904 - SURFACES FOR SPORTS AREAS - INDOOR SURFACES FOR MULTI-SPORTS USE - SPECIFICATION |
| AWWA G400 : 2009 | UTILITY MANAGEMENT SYSTEM |
| ASTM F 2989 : 2013 : REDLINE | Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications |
| UNI EN 15342 : 2008 | PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLYSTYRENE (PS) RECYCLATES |
| I.S. EN 14636-1:2009 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE DRAINAGE AND SEWERAGE - POLYESTER RESIN CONCRETE (PRC) - PART 1: PIPES AND FITTINGS WITH FLEXIBLE JOINTS |
| I.S. CEN TS 1591-4:2007 | FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 4: QUALIFICATION OF PERSONNEL COMPETENCY IN THE ASSEMBLY OF BOLTED JOINTS FITTED TO EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE |
| UNI ISO 10018 : 2013 | QUALITY MANAGEMENT - GUIDELINES ON PEOPLE INVOLVEMENT AND COMPETENCE |
| UNI ISO 20121 : 2013 | EVENT SUSTAINABILITY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| DEFSTAN 05-122/3(2006) : 2006 | PROCEDURES FOR THE MILITARY REGISTRATION OF CIVIL-OWNED AIRCRAFT |
| AAMI ISO 14937:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CEI CLC/TS 50537-1 : 2011 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 1: HV BUSHING FOR TRACTION TRANSFORMERS |
| ANSI/AAMI ISO 17665-1:2006(R2013) | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA C61400-2 : 2008 : R2013 | WIND TURBINES - PART 2: DESIGN REQUIREMENTS FOR SMALL WIND TURBINES |
| ANSI HPRD 1 : 2013(R 2018) | THERMALLY ACTIVATED PRESSURE RELIEF DEVICES FOR COMPRESSED HYDROGEN VEHICLE FUEL CONTAINERS |
| CSA C61400-1 : 2014 | WIND TURBINES - PART 1: DESIGN REQUIREMENTS |
| BS EN 50405 : 2015 | RAILWAY APPLICATIONS - CURRENT COLLECTION SYSTEMS - PANTOGRAPHS, TESTING METHODS FOR CONTACT STRIPS |
| AAMI TIR48 : 2015 | QUALITY MANAGEMENT SYSTEM (QMS) RECOMMENDATIONS ON THE APPLICATION OF THE U.S. FDAS CGMP FINAL RULE ON COMBINATION PRODUCTS |
| I.S. EN 61850-4:2011 | COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 4: SYSTEM AND PROJECT MANAGEMENT |
| BS ISO 26262-2:2011 | Road vehicles. Functional safety Management of functional safety |
| NASA MSFC STD 3459 : 2005 | QUALITY PROGRAM PROVISIONS FOR MSFC TEST AREA CONTRACTORS |
| I.S. EN 4636:2009 | AEROSPACE SERIES - SCREWS, 100 DEGREE COUNTERSUNK HEAD, SIX LOBE RECESS, SHORT THREAD, IN TITANIUM ALLOY TI-P64001, WITH ALUMINIUM PIGMENTED COATING - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| I.S. EN ISO 6789-2:2017 | ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - PART 2: REQUIREMENTS FOR CALIBRATION AND DETERMINATION OF MEASUREMENT UNCERTAINLY (ISO 6789-2:2017) |
| I.S. EN ISO 17989-1:2015 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SUSTAINABILITY - PART 1: PRINCIPLES (ISO 17989-1:2015) |
| I.S. EN ISO 15743:2008 | ERGONOMICS OF THE THERMAL ENVIRONMENT - COLD WORKPLACES - RISK ASSESSMENT AND MANAGEMENT |
| BS EN ISO/IEC 17024:2012 | Conformity assessment. General requirements for bodies operating certification of persons |
| UNI CEN/TS 1451-2 : 2012 | PLASTIC PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| I.S. EN 16240:2013 | LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| BS EN 1852-1:2018 | Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP) Specifications for pipes, fittings and the system |
| EN ISO 19011:2011 COR 2011 | GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS (ISO 19011:2011) |
| I.S. EN 50502:2015 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CURRENT COLLECTION SYSTEMS |
| I.S. EN 62619:2017 | SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR SECONDARY LITHIUM CELLS AND BATTERIES, FOR USE IN INDUSTRIAL APPLICATIONS |
| BS EN 9104-001:2013 | Aerospace series. Quality management systems Requirements for Aviation, Space, and Defence Quality Management System Certification Programs |
| CSA N286.1 : 0 | PROCUREMENT QUALITY ASSURANCE FOR NUCLEAR POWER PLANTS |
| I.S. EN 61854:1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| UNI CEN/TR 15367-3 : 2009 | PETROLEUM PRODUCTS - GUIDE FOR GOOD HOUSEKEEPING - PART 3: PREVENTION OF CROSS CONTAMINATION |
| I.S. EN 1474-2:2008 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 2: DESIGN AND TESTING OF TRANSFER HOSES |
| PREN 15322 : DRAFT 2011 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| I.S. EN 15224:2016 | QUALITY MANAGEMENT SYSTEMS - EN ISO 9001:2015 FOR HEALTHCARE |
| BS EN 492 : 2012 | FIBRE-CEMENT SLATES AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS |
| SAE J 1879 : 2014 | HANDBOOK FOR ROBUSTNESS VALIDATION OF SEMICONDUCTOR DEVICES IN AUTOMOTIVE APPLICATIONS |
| SAE AS 6171 : 2016 | TEST METHODS STANDARD; GENERAL REQUIREMENTS, SUSPECT/COUNTERFEIT, ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL PARTS |
| I.S. EN 14296:2015 | SANITARY APPLIANCES - COMMUNAL WASHING TROUGHS |
| CEN ISO/TS 15877-7:2009 | Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 7: Guidance for the assessment of conformity (ISO/TS 15877-7:2009) |
| UNI EN 15001-2 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 2: DETAILED FUNCTIONAL REQUIREMENTS FOR COMMISSIONING, OPERATION AND MAINTENANCE |
| S.R. CWA 15793:2011 | LABORATORY BIORISK MANAGEMENT |
| I.S. EN 13491:2018 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES |
| EN ISO 15378:2017 | Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) (ISO 15378:2017) |
| ISO 21927-9:2012 | Smoke and heat control systems — Part 9: Specification for control equipment |
| AAMI ISO 11135-1 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| BS ISO/IEC 14764:2006 | Software engineering. Software life cycle processes. Maintenance |
| S.R. CEN/TS 1519-2:2012 | PLASTIC PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLEN (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| I.S. EN 54-7:2000 | COMPONENTS OF AUTOMATIC FIRE DETECTION SYSTEMS - POINT-TYPE SMOKE DETECTORS - DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION |
| I.S. EN 16222:2012 | CATHODIC PROTECTION OF SHIP HULLS |
| UNE-EN ISO 2919:2015 | Radiological protection - Sealed radioactive sources - General requirements and classification (ISO 2919:2012) |
| EN 13476-3:2018 | Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B |
| I.S. EN 14428:2015 | SHOWER ENCLOSURES - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 14967:2006 | FLEXIBLE SHEETS FOR WATERPROOFING - BITUMEN DAMP PROOF COURSES - DEFINITIONS AND CHARACTERISTICS |
| ISO/TR 11175:1993 | Dental implants Guidelines for developing dental implants |
| S.R. CEN/TS 15472:2016 | Postal services - Method for measurement of parcel transit time for cross-border parcels within the European Union and EFTA using Tracking and Tracing |
| I.S. EN 54-22:2015 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 22: RESETTABLE LINE-TYPE HEAT DETECTORS |
| 17/30357048 DC : 0 | BS EN 13707 - FLEXIBLE SHEETS FOR WATERPROOFING - REINFORCED BITUMEN SHEETS FOR ROOF WATERPROOFING - DEFINITIONS AND CHARACTERISTICS |
| ISO 18091:2014 | Quality management systems Guidelines for the application of ISO 9001:2008 in local government |
| I.S. EN ISO 13408-3:2011 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 3: LYOPHILIZATION |
| BS EN ISO 18797-1:2017 | Petroleum, petrochemical and natural gas industries. External corrosion protection of risers by coatings and linings Elastomeric coating systems-polychloroprene or EPDM |
| UNE-ISO 20252:2012 | Market, opinion and social research. Vocabulary and service requirements. |
| ISO 10955:1999 | Aerospace — End-fittings and turnbarrels for aircraft control wire rope — Technical specification |
| UNE 66926:2012 | Quality management systems. Particular requirements for the application of UNE-EN ISO 9001:2008 to technical centers of digital tachographs. |
| I.S. EN 14236:2007 | ULTRASONIC DOMESTIC GAS METERS |
| ISO/IEC 33071:2016 | Information technology — Process assessment — An integrated process capability assessment model for Enterprise processes |
| PREN 14190 : DRAFT 2011 | GYPSUM PLASTERBOARD PRODUCTS FROM PROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO/IEC 17011:2017 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR ACCREDITATION BODIES ACCREDITING CONFORMITY ASSESSMENT BODIES (ISO/IEC 17011:2017) |
| ISO 17367:2013 | Supply chain applications of RFID — Product tagging |
| ISO 12633-1:2011 | Hot-finished structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions |
| ISO/PAS 30003:2008 | Ships and marine technology Ship recycling management systems Requirements for bodies providing audit and certification of ship recycling management |
| ISO/IEC TR 20000-10:2015 | Information technology Service management Part 10: Concepts and terminology |
| CSA ISO 19011 : 2012 : R2017 | GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS |
| CSA HGV 4.10 : 2012 | STANDARD FOR FITTINGS FOR COMPRESSED HYDROGEN GAS AND HYDROGEN RICH GAS MIXTURES |
| BS ISO 10290:1993 | Textiles. Cotton yarns. Specifications |
| DIN EN ISO 7396-1:2016-09 | MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM (ISO 7396-1:2016) |
| PREN 14509 : DRAFT 2013 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| CEI EN 62326-1 : 2002 | PRINTED BOARDS - PART 1: GENERIC SPECIFICATION |
| BS EN 16114:2011 | Management consultancy services |
| CSA ISO 50001 : 2011 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| I.S. EN 9137:2012 | QUALITY MANAGEMENT SYSTEMS - GUIDANCE FOR THE APPLICATION OF AQAP 2110 WITHIN AN EN 9100 QUALITY MANAGEMENT SYSTEM |
| BS EN 1096-4:2004 | Glass in building. Coated glass Evaluation of conformity/Product standard |
| I.S. EN ISO 13918:2018 | WELDING - STUDS AND CERAMIC FERRULES FOR ARC STUD WELDING (ISO 13918:2017) |
| PREN 1279-5 : DRAFT 2015 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY |
| PREN 45545-1 : DRAFT 2010 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL |
| UNI ISO/TS 10004 : 2011 | QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR MONITORING AND MEASURING |
| BS EN ISO 19258:2011 | Soil quality. Guidance on the determination of background values |
| CSA C61869-1 : 2014 | INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS |
| CSA Z7396.2 : 2002 | MEDICAL GAS PIPELINE SYSTEMS - PART 2: ANAESTHETIC GAS SCAVENGING DISPOSAL SYSTEMS |
| ISO/IEC TS 33073:2017 | Information technology Process assessment Process capability assessment model for quality management |
| NF EN 50207 : 2004 | RAILWAY APPLICATIONS - ELECTRONIC POWER CONVERTERS FOR ROLLING STOCK |
| AQAP 2130 : 2009-11 | NATO QUALITY ASSURANCE REQUIREMENTS FOR INSPECTION AND TEST |
| DIN EN 1457-2:2016-10 (Draft) | Chimneys - Clay/ceramic flue liners - Part 2: Flue liners operating under wet conditions - Requirements and test methods; German and English version prEN 1457-2:2016 |
| AAMI ST15883-1 : 2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| CSA/ANSI HGV 3.1 : 2015 | FUEL SYSTEM COMPONENTS FOR COMPRESSED HYDROGEN GAS POWERED VEHICLES |
| ISO 7396-1:2016 | Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum |
| BS EN 30011-1:1993 | Guidelines for auditing quality systems Guidelines for auditing quality systems. Auditing |
| I.S. EN ISO/IEC 17020:2012 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR THE OPERATION OF VARIOUS TYPES OF BODIES PERFORMING INSPECTION (ISO/IEC 17020:2012) |
| PREN 13160-5 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 5: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR IN-TANK GAUGE SYSTEMS AND PRESSURISED PIPEWORK SYSTEMS |
| PREN 14359 : DRAFT 2014 | GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
| S.R. CEN ISO TS 21003-7:2008 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| ISO 3183:2012 | Petroleum and natural gas industries Steel pipe for pipeline transportation systems |
| ISO/TS 15877-7:2009 | Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 7: Guidance for the assessment of conformity |
| BS EN 9120:2010 | Quality management systems. Requirements for aviation, space and defence distributors |
| PREN 179 : DRAFT 2016 | BUILDING HARDWARE - EMERGENCY EXIT DEVICES OPERATED BY A LEVER HANDLE OR PUSH PAD, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| PREN 1263-1 : DRAFT 2012 | SAFETY NETS - PART 1: SAFETY REQUIREMENTS, TEST METHODS |
| 14/30297456 DC : 0 | BS EN 15013 - PLASTICS PIPING SYSTEMS - NON-PRESSURE DRAINAGE AND SEWERAGE PIPING COMPONENTS BURIED IN GROUND - REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR PIPES AND FITTINGS |
| CEN/TR 15640:2007 | Health informatics - Measures for ensuring the patient safety of health software |
| ISO 18797-1:2016 | Petroleum, petrochemical and natural gas industries — External corrosion protection of risers by coatings and linings — Part 1: Elastomeric coating systems-polychloroprene or EPDM |
| UNE-EN 15381:2008 | Geotextiles and geotextile-related products - Characteristics required for use in pavements and asphalt overlays |
| I.S. EN 10088-5:2009 | STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| CEI EN 50341-1 : 2013 | OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS |
| IEC 61511-1:2016+AMD1:2017 CSV | Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements |
| CEI UNI EN 45510-6-1 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-1: TURBINE AUXILIARIES - DEAERATORS |
| PREN 14375 : DRAFT 2015 | CHILD-RESISTANT NON-RECLOSABLE PACKAGING FOR PHARMACEUTICAL PRODUCTS - REQUIREMENTS AND TESTING |
| UNI EN 14188-4 : 2009 | JOINT FILLERS AND SEALANTS - PART 4: SPECIFICATIONS FOR PRIMERS TO BE USED WITH JOINT SEALANTS |
| ISO/TS 12805:2011 | Nanotechnologies — Materials specifications — Guidance on specifying nano-objects |
| UNE-EN ISO 17663:2010 | Welding - Quality requirements for heat treatment in connection with welding and allied processes (ISO 17663:2009) |
| BS EN ISO 11607-1:2017 | Packaging for terminally sterilized medical devices Requirements for materials, sterile barrier systems and packaging systems |
| BS EN 14534:2016 | Postal services. Quality of service. Measurement of the transit time of end-to-end services for bulk mail |
| IECQ 04-1:2010 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - STANDARD TRAINING - PART 1: IECQ TRAINING BODY REQUIREMENTS AND PROCESS FOR IECQ ACCEPTANCE |
| CEN/CLC/TR 14060:2014 | Medical device traceability enabled by unique device identification (UDI) |
| UNI EN 16397-2 : 2014 | FLEXIBLE COUPLINGS - PART 2: CHARACTERISTICS AND TESTING FOR METAL BANDED FLEXIBLE COUPLINGS, ADAPTORS AND BUSHES |
| UNE-EN ISO/IEC 80079-34:2012 | Explosive atmospheres - Part 34: Application of quality systems for equipment manufacture |
| DD CEN ISO/TS 15877-7:2009 | Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C) Guidance for the assessment of conformity |
| ISO 25841:2017 | Female condoms — Requirements and test methods |
| ISO 22004:2014 | Food safety management systems Guidance on the application of ISO 22000 |
| UNI EN 16271 : 2013 | VALUE MANAGEMENT - FUNCTIONAL EXPRESSION OF THE NEED AND FUNCTIONAL PERFORMANCE SPECIFICATION - REQUIREMENTS FOR EXPRESSING AND VALIDATING THE NEED TO BE SATISFIED WITHIN THE PROCESS OF PURCHASING OR OBTAINING A PRODUCT |
| CEI UNI EN 45510-4-7 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4: BOILER AUXILIARIES - SECTION 7: ASH HANDLING PLANT |
| IEC 62279:2015 | Railway applications - Communication, signalling and processing systems - Software for railway control and protection systems |
| UNE-EN 16034:2015 | Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics |
| PREN 12420 : DRAFT 2012 | COPPER AND COPPER ALLOYS - FORGINGS |
| CEI UNI EN 45510-7-1 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION PLANT, EQUIPMENT AND SYSTEMS - PART 7-1: PIPEWORK AND VALVES - HIGH PRESSURE PIPING SYSTEMS |
| PREN 14695 : DRAFT 2017 | FLEXIBLE SHEETS FOR WATERPROOFING - REINFORCED BITUMEN SHEETS FOR WATERPROOFING OF CONCRETE BRIDGE DECKS AND OTHER TRAFFICKED AREAS OF CONCRETE - DEFINITIONS AND CHARACTERISTICS |
| ISO 28598-1:2017 | Acceptance sampling procedures based on the allocation of priorities principle (APP) — Part 1: Guidelines for the APP approach |
| PREN 50129 : DRAFT 2000 | RAILWAY APPLICATIONS - SAFETY RELATED ELECTRONIC SYSTEMS FOR SIGNALLING |
| CLC/TS 50537-4:2010 | Railway applications - Mounted parts of the traction transformer and cooling system - Part 4: Gas and liquid actuated (Buchholz) relay for liquid immersed transformers and reactors with conservator for rail vehicles |
| PREN 13950 : DRAFT 2011 | GYPSUM BOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN 334:2016-05 (Draft) | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| PREN 15012 : DRAFT 2014 | PLASTICS PIPING SYSTEMS - BURIED AND ABOVE GROUND PIPING COMPONENTS FOR NON PRESSURE SOIL AND WASTE DISCHARGE WITHIN THE BUILDING STRUCTURE - REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR PIPES AND FITTINGS |
| BS ISO 10003:2007 | Quality management. Customer satisfaction. Guidelines for dispute resolution external to organizations |
| UNE-EN 14353:2017 | Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods |
| OIML D 9 : 2004 | PRINCIPLES OF METROLOGICAL SUPERVISION |
| UNI EN ISO 13408-3 : 2011 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 3: LYOPHILIZATION |
| ISO 21927-8:2017 | Smoke and heat control systems — Part 8: Smoke control dampers |
| DEFSTAN 05-62(PT20)/1(1990) : 1990 | GUIDANCE ON QUALITY ASSURANCE PROCEDURES - PART 20: ARRANGEMENTS FOR GOVERNMENT QUALITY ASSURANCE BETWEEN SWITZERLAND AND THE UNITED KINGDOM |
| ASTM F 1813 : 2013 : REDLINE | Standard Specification for Wrought Titanium<span class='unicode'>–</span>12 Molybdenum<span class='unicode'>–</span>6 Zirconium<span class='unicode'>–</span>2 Iron Alloy for Surgical Implant (UNS R58120) |
| CEI EN 50581 : 2013 | TECHNICAL DOCUMENTATION FOR THE ASSESSMENT OF ELECTRICAL AND ELECTRONIC PRODUCTS WITH RESPECT TO THE RESTRICTION OF HAZARDOUS SUBSTANCES |
| ASTM F 1718 : 2001 : R2006 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
| UNE-EN 14428:2016 | Shower enclosures - Functional requirements and test methods |
| UNE-EN 13282-3:2015 | Hydraulic road binders - Part 3: Conformity evaluation |
| EEMUA 224 : 2013 | A guide to risk-based procurement Quality assurance of safety-critical engineering equipment and materials |
| UNI EN 1474-2 : 2009 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 2: DESIGN AND TESTING OF TRANSFER HOSES |
| CSA ISO 11135 : 1998:R2003 | MEDICAL DEVICES - VALIDATION AND ROUTINE CONTROL OF ETHYLENE OXIDE STERILIZATION |
| UNI CEI EN ISO/IEC 17024 : 2012 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR BODIES OPERATING CERTIFICATION OF PERSONS |
| I.S. EN 61400-2:2014 | WIND TURBINES - PART 2: SMALL WIND TURBINES |
| ASTM F 2257 : 2014 : REDLINE | Standard Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673) |
| ASTM F 1173 : 2001 : R2018 | Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications |
| UNI CEI EN 45510-4-10 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - BOILER AUXILIARIES - FLUE GAS DENITRIFICATION (DE-NOX) PLANT |
| UNI EN ISO 2919 : 2015 | RADIOLOGICAL PROTECTION - SEALED RADIOACTIVE SOURCES - GENERAL REQUIREMENTS AND CLASSIFICATION |
| UNI EN ISO 13127 : 2012 | PACKAGING - CHILD RESISTANT PACKAGING - MECHANICAL TEST METHODS FOR RECLOSABLE CHILD RESISTANT PACKAGING SYSTEMS |
| PREN 15015 : DRAFT 2014 | PLASTICS PIPING SYSTEMS - HOT AND COLD WATER PIPING COMPONENTS - REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR PIPES AND FITTINGS |
| UNI EN 54-16 : 2008 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 16: VOICE ALARM CONTROL AND INDICATING EQUIPMENT |
| NF EN 3712 : 2008 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, ONE LUG, FIXED, REDUCED SERIES, WITH COUNTERBORE, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 12809 : DRAFT 2011 | RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS |
| ASTM F 2883 : 2011 | Standard Guide for Characterization of Ceramic and Mineral Based Scaffolds used for Tissue-Engineered Medical Products (TEMPs) and as Device for Surgical Implant Applications (Withdrawn 2020) |
| ASTM F 2633 : 2013 : REDLINE | Standard Specification for Wrought Seamless Nickel-Titanium Shape Memory Alloy Tube for Medical Devices and Surgical Implants |
| EN 50341-1:2012 | Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications |
| EN 54-12:2015 | Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam |
| ISO/TS 15874-7:2003 | Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 7: Guidance for the assessment of conformity |
| DIN EN 13172:2012-04 | THERMAL INSULATION PRODUCTS - EVALUATION OF CONFORMITY |
| EN ISO 13918:2018 | Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017, Corrected version 2018-05) |
| ISO Guide 34:2009 | General requirements for the competence of reference material producers |
| DIN EN 13565-1:2016-08 (Draft) | FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| ISO 15741:2016 | Paints and varnishes — Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases |
| ISO 11737-2:2009 | Sterilization of medical devices Microbiological methods Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process |
| ISO 22006:2009 | Quality management systems — Guidelines for the application of ISO 9001:2008 to crop production |
| ISO/TR 31004:2013 | Risk management — Guidance for the implementation of ISO 31000 |
| UNE-EN 12952-5:2012 | Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
| ISO 18185-4:2007 | Freight containers Electronic seals Part 4: Data protection |
| EN 1279-2:2002 | Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration |
| EN ISO 16228:2018 | Fasteners - Types of inspection documents (ISO 16228:2017) |
| EN 12004-1:2017 | Adhesives for ceramic tiles - Part 1: Requirements, assessment and verification of constancy of performance, classification and marking |
| ISO/TS 15876-7:2003 | Plastics piping systems for hot and cold water installations Polybutylene (PB) Part 7: Guidance for the assessment of conformity |
| ISO/TS 15998-2:2012 | Earth-moving machinery Machine control systems (MCS) using electronic components Part 2: Use and application of ISO 15998 |
| ISO 21368:2005 | Adhesives Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures |
| ISO 9149:2010 | Cork wallcoverings in rolls Specifications |
| PREN 10255 : DRAFT 2010 | NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS |
| ISO 55002:2014 | Asset management Management systems Guidelines for the application of ISO 55001 |
| ISO 39001:2012 | Road traffic safety (RTS) management systems — Requirements with guidance for use |
| ISO/IEC/IEEE 24748-4:2016 | Systems and software engineering — Life cycle management — Part 4: Systems engineering planning |
| ISO 28007-1:2015 | Ships and marine technology — Guidelines for Private Maritime Security Companies (PMSC) providing privately contracted armed security personnel (PCASP) on board ships (and pro forma contract) — Part 1: General |
| ISO 20492-1:2008 | Glass in buildings - Insulating glass — Part 1: Durability of edge seals by climate tests |
| ISO/IEC Guide 76:2008 | Development of service standards Recommendations for addressing consumer issues |
| ISO 7240-17:2009 | Fire detection and fire alarm systems Part 17: Short-circuit isolators |
| EN ISO 12944-1:2017 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 1: General introduction (ISO 12944-1:2017) |
| ISO 7240-24:2016 | Fire detection and fire alarm systems Part 24: Fire alarm loudspeakers |
| EN 14587-1:2007 | Railway applications - Track - Flash butt welding of rails - Part 1: New R220, R260, R260Mn and R350HT grade rails in a fixed plant |
| ISO/TS 22559-3:2011 | Safety requirements for lifts (elevators) — Part 3: Global conformity assessment procedures (GCAP) — Prerequisites for certification of conformity of lift systems, lift components and lift functions |
| CEN ISO/TS 15875-7:2003 | Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 7: Guidance for the assessment of conformity (ISO/TS 15875-7:2003) |
| BS EN ISO 11137-1:2015 | Sterilization of health care products. Radiation Requirements for development, validation and routine control of a sterilization process for medical devices |
| IEC TS 62239-1:2015 | Process management for avionics - Management plan - Part 1: Preparation and maintenance of an electronic components management plan |
| ISO/PAS 17712:2006 | Freight containers Mechanical seals |
| I.S. EN ISO/IEC 15426-2:2006 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE VERIFIER CONFORMANCE SPECIFICATION - PART 2: TWO-DIMENSIONAL SYMBOLS |
| ISO 18788:2015 | Management system for private security operations Requirements with guidance for use |
| S.R. OHSAS 18001:2007 | OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS |
| BS EN 13422 : 2004 | VERTICAL ROAD SIGNS - PORTABLE DEFORMABLE WARNING DEVICES AND DELINEATORS - PORTABLE ROAD TRAFFIC SIGNS - CONES AND CYLINDERS |
| ISO 24512:2007 | Activities relating to drinking water and wastewater services — Guidelines for the management of drinking water utilities and for the assessment of drinking water services |
| I.S. EN 1057:2006 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR WATER AND GAS IN SANITARY AND HEATING APPLICATIONS |
| UNE-EN ISO 3452-2:2014 | Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2013) |
| IEC 62619:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications |
| ISO 21789:2009 | Gas turbine applications — Safety |
| ISO 9000-4:1993 | Quality management and quality assurance standards — Part 4: Guide to dependability programme management |
| I.S. EN 14846:2008 | BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| UNE-EN 14296:2016 | Sanitary appliances - Communal washing troughs |
| UNE-EN 14359:2017 | Gas-loaded accumulators for fluid power applications |
| ISO 7195:2005 | Nuclear energy Packaging of uranium hexafluoride (UF6) for transport |
| ISO 14300-2:2011 | Space systems — Programme management — Part 2: Product assurance |
| I.S. EN 15655:2009 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 4131:2009 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1250 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| ISO 28003:2007 | Security management systems for the supply chain Requirements for bodies providing audit and certification of supply chain security management systems |
| IECQ 03-7:2013 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PROCEDURE - PART 7: IECQ COUNTERFEIT AVOIDANCE PROGRAMME (IECQ AP-CAP) - PROGRAMME REQUIREMENTS |
| EN 12420:2014 | Copper and copper alloys - Forgings |
| ISO 9631:2018 | Rubber seals — Joint rings for pipelines for hot-water supply up to 110 °C — Specification for the material |
| UNE-EN 490:2012 | Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications |
| I.S. EN 14509:2013 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| UNE-EN 9100:2010 | Quality Management Systems - Requirements for Aviation, Space and Defense Organizations |
| UNE-EN ISO/IEC 17020:2012 | Conformity assessment - Requirements for the operation of various types of bodies performing inspection (ISO/IEC 17020:2012) |
| IECQ 03-1:2012 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PROCEDURE - PART 1: GENERAL REQUIREMENTS FOR ALL IECQ SCHEMES |
| I.S. EN 1279-5:2005 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY |
| IEC 62138:2004 | Nuclear power plants - Instrumentation and control important for safety - Software aspects for computer-based systems performing category B or C functions |
| ISO/IEC 10967-1:2012 | Information technology — Language independent arithmetic — Part 1: Integer and floating point arithmetic |
| I.S. EN 62304:2006 | MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE-CYCLE PROCESSES |
| I.S. EN 15644:2009 | TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS |
| I.S. CEN ISO TR 25108:2006 | NON-DESTRUCTIVE TESTING - GUIDELINES FOR NDT PERSONNEL TRAINING ORGANIZATIONS |
| I.S. EN 16001:2009 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| EN 12163:2016 | Copper and copper alloys - Rod for general purposes |
| IECQ 03-5:2014 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PRODECURE - PART 5: IECQ HSPM SCHEME - HAZARDOUS SUBSTANCE PROCESS MANAGEMENT REQUIREMENTS |
| DIN EN 14179-2:2005-08 | Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard |
| DIN EN 12150-2:2005-01 | Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard; German version EN 12150-2:2004 |
| DIN EN 12583:2014-07 | GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS |
| DIN EN 1990:2010-12 | Eurocode: Basis of structural design (includes Amendment A1:2005 + Corrigendum A1:2005/AC:2010) |
| DIN EN 546-1:2007-03 | Aluminium and aluminium alloys - Foil - Part 1: Technical conditions for inspection and delivery |
| DIN EN ISO 10472-1:2009-10 | Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997) |
| DIN EN 1168:2011-12 | Precast concrete products - Hollow core slabs (includes Amendment A3:2011) |
| I.S. EN 1917:2002 | CONCRETE MANHOLES AND INSPECTION CHAMBERS, UNREINFORCED, STEEL FIBRE AND REINFORCED |
| DIN EN 1304:2013-08 | CLAY ROOFING TILES AND FITTINGS - PRODUCT DEFINITIONS AND SPECIFICATIONS |
| DIN EN ISO 14554-1:2014-05 | Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements (ISO 14554-1:2013) |
| DIN EN 12507:2005-12 | Transportation services - Guidance notes on the application of EN ISO 9001:2000 to the road transportation, storage, distribution and railway goods industries |
| DIN EN 14188-3:2006-04 | Joint fillers and sealants - Part 3: Specifications for preformed joint seals |
| DIN EN 1863-2:2005-01 | Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard; German version EN 1863-2:2004 |
| DIN EN 1677-6:2009-03 | COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4 |
| DIN EN 12186:2014-12 | GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS |
| DIN EN 13015:2008-12 | MAINTENANCE FOR LIFTS AND ESCALATORS - RULES FOR MAINTENANCE INSTRUCTIONS |
| DIN EN 1433:2005-09 | DRAINAGE CHANNELS FOR VEHICULAR AND PEDESTRIAN AREAS - CLASSIFICATION, DESIGN AND TESTING REQUIREMENTS, MARKING AND EVALUATION OF CONFORMITY |
| DIN EN 13981-4:2007-02 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 4: Forgings |
| I.S. EN 13230-4:2016 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 4: PRESTRESSED BEARERS FOR SWITCHES AND CROSSINGS |
| DIN EN 12271:2007-03 | Surface dressing - Requirements |
| DIN EN 1125:2008-04 | BUILDING HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| DIN EN 12420:2014-09 | COPPER AND COPPER ALLOYS - FORGINGS |
| DIN EN 12951:2005-02 | PREFABRICATED ACCESSORIES FOR ROOFING - PERMANENTLY FIXED ROOF LADDERS - PRODUCT SPECIFICATION AND TEST METHODS |
| DIN EN 12446:2011-09 | Chimneys - Components - Concrete outer wall elements |
| DIN EN ISO 17662:2016-09 | WELDING - CALIBRATION, VERIFICATION AND VALIDATION OF EQUIPMENT USED FOR WELDING, INCLUDING ANCILLARY ACTIVITIES (ISO 17662:2016) |
| DIN EN 13024-2:2005-01 | Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/Product standard; German version EN 13024-2:2004 |
| DIN EN 1453-1:2000-03 | PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES AND THE SYSTEM |
| DIN EN 295-2:2013-05 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING |
| DIN EN 459-3:2015-07 | BUILDING LIME - PART 3: CONFORMITY EVALUATION |
| IEEE 1662-2008 | IEEE Guide for the Design and Application of Power Electronics in Electrical Power Systems on Ships |
| DIN EN 508-1:2014-08 | Roofing and cladding products from metal sheet - Specification for self-supporting of steel, aluminium or stainless steel sheet - Part 1: Steel |
| DIN EN 12259-1:2006-03 | Fixed firefighting systems - Components for sprinkler and water spray systems - Part 1: Sprinklers |
| DIN EN 13808:2013-07 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CATIONIC BITUMINOUS EMULSIONS |
| DIN EN 13956:2013-03 | Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics |
| DIN EN 10340:2008-01 | Steel castings for structural uses |
| DIN EN 494:2015-12 | FIBRE-CEMENT PROFILED SHEETS AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS |
| DIN EN 448:2016-02 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| DIN EN 438-7:2005-04 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes; German version EN 438-7:2005 |
| DIN EN 331:2016-04 | MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
| DIN EN 13984:2013-05 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER VAPOUR CONTROL LAYERS - DEFINITIONS AND CHARACTERISTICS |
| DIN EN 506:2009-07 | This European Standard specifies requirements for self-supporting roofing products for discontinuous laying made from copper or zinc-copper-titanium alloy sheet with or without additional organic coatings. |
| DIN EN ISO 14344:2010-06 | Welding consumables - Procurement of filler materials and fluxes (ISO 14344:2010) |
| DIN EN 488:2016-02 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - STEEL VALVE ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| DIN EN 12050-4:2015-05 | WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 4: NON-RETURN VALVES FOR FAECAL-FREE WASTEWATER AND WASTEWATER CONTAINING FAECAL MATTER |
| DIN EN 12050-1:2015-05 | WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 1: LIFTING PLANTS FOR WASTEWATER CONTAINING FAECAL MATTER |
| DIN EN 13915:2016-02 (Draft) | PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN 694:2014-10 | FIRE-FIGHTING HOSES - SEMI-RIGID HOSES FOR FIXED SYSTEMS |
| DIN EN 13963:2014-09 | JOINTING MATERIALS FOR GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN 13964:2014-08 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| DIN EN 13950:2014-09 | GYPSUM BOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 10993-1:2010-04 | Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk management system (ISO 10993-1:2009) |
| DIN EN ISO 15189:2014-11 | Medical laboratories - Requirements for quality and competence (ISO 15189:2012, Corrected version 2014-08-15) |
| DIN EN 15343:2008-02 | Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content |
| DIN EN 14680:2015-12 | ADHESIVES FOR NON-PRESSURE THERMOPLASTIC PIPING SYSTEMS - SPECIFICATIONS |
| DIN EN 12004:2014-02 | ADHESIVES FOR TILES - REQUIREMENTS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
| DIN EN 15346:2015-01 | Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates |
| DIN EN 12050-3:2015-08 | WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 3: LIFTING PLANTS FOR LIMITED APPLICATIONS |
| DIN EN 14382:2016-05 (Draft) | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| DIN EN 12166:2015-12 (Draft) | COPPER AND COPPER ALLOYS - WIRE FOR GENERAL PURPOSES |
| DIN EN ISO 3452-2:2014-03 | Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2013) |
| DIN EN 13888:2009-08 | Grout for tiles - Requirements, evaluation of conformity, classification and designation |
| DIN EN ISO 11608-1:2015-04 | Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2014) |
| DIN EN 14375:2016-09 | Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing |
| DIN EN 14212:2012-11 | Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence |
| BS EN 14188-1:2004 | Joint fillers and sealants Specifications for hot applied sealants |
| BS EN 13674-1 : 2011 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| BS EN 54-17:2005 | Fire detection and fire alarm systems Short-circuit isolators |
| UNE-EN 1453-1:2017 | Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system. (Consolidated version) |
| ISO 11140-3:2007 | Sterilization of health care products — Chemical indicators — Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test |
| BS EN 12735-2:2016 | Copper and copper alloys. Seamless, round tubes for air conditioning and refrigeration Tubes for equipment |
| BS EN 545:2010 | Ductile iron pipes, fittings, accessories and their joints for water pipelines. Requirements and test methods |
| BS EN 13312-1:2001 | Biotechnology. Performance criteria for piping and instrumentation General performance criteria |
| BS EN 1125:2008 | Building hardware. Panic exit devices operated by a horizontal bar, for use on escape routes. Requirements and test methods |
| UNE-EN 13230-2:2016 | Railway applications - Track - Concrete sleepers and bearers - Part 2: Prestressed monoblock sleepers |
| UNE-EN ISO 11140-1:2015 | Sterilization of health care products - Chemical indicators - Part 1: General requirements (ISO 11140-1:2014) |
| UNE-EN ISO 14344:2011 | Welding consumables - Procurement of filler materials and fluxes (ISO 14344:2010) |
| BS EN 14178-2:2004 | Glass in building. Basic alkaline earth silicate glass products Evaluation of conformity/Product standard |
| BS EN 13969:2004 | Flexible sheets for waterproofing. Bitumen damp proof sheets including bitumen basement tanking sheets. Definitions and characteristics |
| IEC 61189-5:2006 | Test methods for electrical materials, interconnection structures and assemblies - Part 5: Test methods for printed board assemblies |
| BS EN 54-21:2006 | Fire detection and fire alarm systems Alarm transmission and fault warning routing equipment |
| BS EN 969:2009 | Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods |
| BS EN 12899-2:2007 | Fixed, vertical road traffic signs Transilluminated traffic bollards (TTB) |
| BS EN 13263-2 : 2005 | SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
| UNE-EN 1423:2013 | Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two |
| BS EN 1594:2013 | Gas infrastructure. Pipelines for maximum operating pressure over 16 bar. Functional requirements |
| BS EN 61191-4:2017 | Printed board assemblies Sectional specification. Requirements for terminal soldered assemblies |
| BS EN ISO 6789:2003 | Assembly tools for screws and nuts. Hand torque tools. Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure |
| BS EN 4168:2004 | Aerospace series. Clips, spring tension, three parts. Outer clips in heat resisting steel FE-PA2601 (A286) |
| BS EN 818-1 : 1996 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 1: GENERAL CONDITIONS OF ACCEPTANCE |
| BS EN 14436:2004 | Copper and copper alloys. Electrolytically tinned strip |
| UNE-EN 14250:2010 | Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners |
| BS EN 12168:1998 | Copper and copper alloys. Hollow rod for free machining purposes |
| BS EN 14016-1:2004 | Binders for magnesite screeds. Caustic magnesia and magnesium chloride Definitions, requirements |
| UNE-EN 1790:2015 | Road marking materials - Preformed road markings |
| BS EN 197-2:2014 | Cement Conformity evaluation |
| BS EN 13160-5:2004 | Leak detection systems Tank gauge leak detection systems |
| BS EN 4167:2004 | Aerospace series. Clips, spring tension, three parts. Inner clips in heat resisting steel FE-PA2601 (A286) |
| BS EN 1253-3:2016 | Gullies for buildings Evaluation of conformity |
| BS EN 588-2:2001 | Fibre-cement pipes for sewers and drains Manholes and inspection chambers |
| BS EN 572-9:2004 | Glass in building. Basic soda lime silicate glass products Evaluation of conformity/Product standard |
| BS EN 13069:2005 | Chimneys. Clay/ceramic outer walls for system chimneys. Requirements and test methods |
| ISO 24511:2007 | Activities relating to drinking water and wastewater services — Guidelines for the management of wastewater utilities and for the assessment of wastewater services |
| BS EN 13249:2016 | Geotextiles and geotextile-related products. Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion) |
| BS EN 12271:2006 | Surface dressing. Requirements |
| DIN EN 351-1:2007-10 | Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention |
| ISO 13053-1:2011 | Quantitative methods in process improvement Six Sigma Part 1: DMAIC methodology |
| BS EN 494 : 2012 | FIBRE-CEMENT PROFILED SHEETS AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS |
| UNE-EN 12842:2013 | Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods |
| UNE-EN 1856-1:2010 | Chimneys - Requirements for metal chimneys - Part 1: System chimney products |
| UNE-EN 1344:2015 | Clay pavers - Requirements and test methods |
| UNE-EN 13481-7:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossings and check rails |
| BS EN 13172:2012 | Thermal insulation products. Evaluation of conformity |
| BS EN 459-3:2015 | Building lime Conformity evaluation |
| BS EN 3431:2007 | Aerospace series. Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, silver plated. Classification: 1100 MPa (at ambient temperature)/425°C |
| UNE-EN 12050-3:2015 | Wastewater lifting plants for buildings and sites - Part 3: Lifting plants for limited applications |
| BS EN ISO 9000-3:1997 | Quality management and quality assurance standards Guidelines for the application of ISO 9001:1994 to the development, supply, installation and maintenance of computer software |
| BS EN 14817:2006 | Railway applications. Suspension components. Air-spring control elements |
| UNE-EN 13707:2014 | Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics |
| UNE-EN ISO/IEC 19796-1:2010 | Information technology - Learning, education and training - Quality management, assurance and metrics - Part 1: General approach (ISO/IEC 19796-1:2005) |
| ISO/TS 22004:2005 | Food safety management systems Guidance on the application of ISO 22000:2005 |
| ISO 15883-1:2006 | Washer-disinfectors Part 1: General requirements, terms and definitions and tests |
| ISO 28765:2016 | Vitreous and porcelain enamels — Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges |
| UNE-EN 13204:2017 | Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements |
| BS EN 14637:2007 | Building hardware. Electrically controlled hold-open systems for fire/smoke door assemblies. Requirements, test methods, application and maintenance |
| BS EN 13212:2011 | Road marking materials. Requirements for factory production control |
| DIN EN 1337-4:2004-08 | Structural bearings - Part 4: Roller bearings |
| BS EN 295-10:2005 | Vitrified clay pipes and fittings and pipe joints for drains and sewers Performance requirements |
| BS EN 694:2014 | Fire-fighting hoses. Semi-rigid hoses for fixed systems |
| BS EN 13411-1 : 2002 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 1: THIMBLES FOR STEEL WIRE ROPE SLINGS |
| UNE-EN 13224:2012 | Precast concrete products - Ribbed floor elements |
| UNE-EN 508-3:2010 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel |
| ISO 16904:2016 | Petroleum and natural gas industries Design and testing of LNG marine transfer arms for conventional onshore terminals |
| UNE-EN 1982:2018 | Copper and copper alloys - Ingots and castings |
| BS EN 13411-6 : 2004 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET |
| BS EN 4498:2005 | Aerospace series. Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating. Classification: 1 550 MPa (at ambient temperature) / 315 °C |
| 18/30359998 DC : 0 | BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS |
| ISO 10019:2005 | Guidelines for the selection of quality management system consultants and use of their services |
| BS EN 12094-16:2003 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for odorizing devices for CO<sub>2</sub> low pressure systems |
| UNE-EN 10223-3:2014 | Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes |
| BS EN 14680:2015 | Adhesives for non-pressure thermoplastics piping systems. Specifications |
| BS EN 30-1-2:2012 | Domestic cooking appliances burning gas. Safety Appliances having forced-convection ovens and/or grills |
| DIN EN 14785:2006-09 | Residential space heating appliances fired by wood pellets - Requirements and test methods |
| UNE-EN ISO/IEC 17024:2012 | Conformity assessment - General requirements for bodies operating certification of persons (ISO/IEC 17024:2012) |
| UNE-EN 12450:2013 | Copper and copper alloys - Seamless, round copper capillary tubes |
| ISO 3834-1:2005 | Quality requirements for fusion welding of metallic materials Part 1: Criteria for the selection of the appropriate level of quality requirements |
| UNE-EN 12050-4:2015 | Wastewater lifting plants for buildings and sites - Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter |
| UNE-EN 12050-2:2015 | Wastewater lifting plants for buildings and sites - Part 2: Lifting plants for faecal-free wastewater |
| UNE-EN 14733:2006 | Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control |
| UNE-EN 61869-1:2010 | Instrument transformers -- Part 1: General requirements |
| EEMUA 207 : 2009 | DOUBLE CONCRETE TANKS FOR LIQUEFIED GAS - GUIDE TO DESIGN, CONSTRUCTION AND OPERATION |
| EN 997:2012+A1:2015 | WC pans and WC suites with integral trap |
| NASA KSC C 123 : 2009 | SURFACE CLEANLINESS OF GROUND SUPPORT EQUIPMENT FLUID SYSTEMS, SPECIFICATION FOR |
| UNI EN 13262 : 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
| UNE-EN 1304:2014 | Clay roofing tiles and fittings - Product definitions and specifications |
| UNI EN 13260 : 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELSETS - PRODUCT REQUIREMENTS |
| I.S. EN ISO 14161:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| NASA MSFC SPEC 3709 : 2017 | SPECIFICATION FOR SOLVENT, CLEANING, TRANS-1-CHLORO-3,3,3,-TRIFLUOROPROPENE, SOLSTICE[R] PF |
| EEMUA 218 : 2010 | QUALITY REQUIREMENTS FOR THE MANUFACTURE AND SUPPLY OF DUPLEX STAINLESS STEELS |
| UNE-EN ISO/IEC 17021:2011 | Conformity assessment - Requirements for bodies providing audit and certification of management systems (ISO/IEC 17021:2011) |
| UNE-EN 12449:2016 | Copper and copper alloys - Seamless, round tubes for general purposes |
| I.S. EN ISO 11737-2:2009 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
| DIN EN 1858:2011-09 | Chimneys - Components - Concrete flue blocks |
| UNI EN 54-3 : 2014 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS |
| I.S. EN 1319:2009 | DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN-ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW |
| I.S. EN 12569:2000 | INDUSTRIAL VALVES - VALVES FOR CHEMICAL AND PETROCHEMICAL PROCESS INDUSTRY - REQUIREMENTS AND TESTS |
| OVE/ONORM EN 61400-22 : 2011 | WIND TURBINES - PART 22: CONFORMITY TESTING AND CERTIFICATION (IEC 61400-22:2010) |
| EN 14964:2006 | Rigid underlays for discontinuous roofing - Definitions and characteristics |
| UNI EN 13261 : 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
| EN 13476-2:2018+A1:2020 | Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A |
| EN 13850:2012 | Postal Services - Quality of Services - Measurement of the transit time of end-to-end services for single piece priority mail and first class mail |
| EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| UNE-EN 61400-22:2011 | Wind turbines - Part 22: Conformity testing and certification |
| EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| I.S. EN ISO/IEC 15416:2002 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE PRINT QUALITY TEST SPECIFICATION - LINEAR SYMBOLS |
| NASA STD 8719.12 : 2010 | SAFETY STANDARD FOR EXPLOSIVES, PROPELLANTS, AND PYROTECHNICS |
| EN 50155:2017 | Railway applications - Rolling stock - Electronic equipment |
| EN 13261:2009+A1:2010 | Railway applications - Wheelsets and bogies - Axles - Product requirements |
| UNE-EN 12004:2008 | Adhesives for tiles - Requirements, evaluation of conformity, classification and designation |
| NASA MSFC STD 3619 : 2012 | MSFC COUNTERFEIT ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL PARTS AVOIDANCE, DETECTION, MITIGATION, AND DISPOSITION REQUIREMENTS FOR SPACE FLIGHT AND CRITICAL GROUND SUPPORT HARDWARE |
| EN 60895:2003 | Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and ± 600 kV d.c. |
| I.S. EN 13262:2004 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
| CSA N290.14 : 2015 | QUALIFICATION OF DIGITAL HARDWARE AND SOFTWARE FOR USE IN INSTRUMENTATION AND CONTROL APPLICATIONS FOR NUCLEAR POWER PLANTS |
| CSA N290.8 : 2015 | TECHNICAL SPECIFICATION REQUIREMENTS FOR NUCLEAR POWER PLANT COMPONENTS |
| OVE/ONORM EN 50128 : 2012 AC 2014 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SOFTWARE FOR RAILWAY CONTROL AND PROTECTION SYSTEMS |
| I.S. EN 13850:2012 | POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF THE TRANSIT TIME OF END-TO-END SERVICES FOR SINGLE PIECE PRIORITY MAIL AND FIRST CLASS MAIL |
| UNE-ISO 10018:2015 | Quality management. Guidelines on people involvement and competence |
| EN ISO 14161:2009 | Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results (ISO 14161:2009) |
| ONORM EN ISO 16106 : 2006 | PACKAGING - TRANSPORT PACKAGES FOR DANGEROUS GOODS - DANGEROUS GOODS PACKAGINGS, INTERMEDIATE BULK CONTAINERS (IBCS) AND LARGE PACKAGINGS - GUIDELINES FOR THE APPLICATION OF ISO 9001 |
| EN 1474-2:2008 | Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses |
| NASA-STD-8739.8A : 2020 | SOFTWARE ASSURANCE AND SOFTWARE SAFETY STANDARD |
| EEMUA 222 : 2009 | GUIDE TO THE APPLICATION OF IEC 61511 TO SAFETY INSTRUMENTED SYSTEMS IN THE UK PROCESS INDUSTRIES |
| EN 13260:2009+A1:2010 | Railway applications - Wheelsets and bogies - Wheelsets - Product requirements |
| I.S. EN 13260:2009 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELSETS - PRODUCT REQUIREMENTS |
| EN 13262:2004+A2:2011 | Railway applications - Wheelsets and bogies - Wheels - Product requirements |
| I.S. EN ISO 9000:2015 | QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY (ISO 9000:2015) |
| EIA 4899 : 2001 | STANDARD FOR PREPARING AN ELECTRONIC COMPONENTS MANAGEMENT PLAN |
| UNI EN 13850 : 2013 | POSTAL SERVICES - QUALITY OF SERVICES - MEASUREMENT OF THE TRANSIT TIME OF END-TO-END SERVICES FOR SINGLE PIECE PRIORITY MAIL AND FIRST CLASS MAIL |
| EN 62366-1:2015/AC:2015 | MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES (IEC 62366-1:2015) |
| EN 61496-1:2013/AC:2015 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012) |
| EN 13986:2004+A1:2015 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| I.S. EN ISO 15883-1:2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006) |
| EN 1474-1:2008 | Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms |
| EN 15283-1:2008+A1:2009 | Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement |
| EN 506:2008 | Roofing products of metal sheet - Specification for self-supporting products of copper or zinc sheet |
| EN 14532-3:2004 | Welding consumables - Test methods and quality requirements - Part 3: Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys |
| EN 15161:2006 | Water conditioning equipment inside buildings - Installation, operation, maintenance and repair |
| EN 4497:2005 | Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| EN ISO 6789-1:2017 | Assembly tools for screws and nuts - Hand torque tools - Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance (ISO 6789-1:2017) |
| EN 14662-3:2015 | Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography |
| EN 13808:2013 | Bitumen and bituminous binders - Framework for specifying cationic bituminous emulsions |
| EN 13964:2014 | Suspended ceilings - Requirements and test methods |
| EN 14408-1:2004 | Plastics piping systems for renovation of underground gas supply networks - Part 1: General |
| EN 2889:2006 | Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C |
| EN ISO/IEC 17040:2005 | Conformity assessment - General requirements for peer assessment of conformity assessment bodies and accreditation bodies (ISO/IEC 17040:2005) |
| EN 16001:2009 | Energy management systems - Requirements with guidance for use |
| EN ISO/IEC 17021-1:2015 | Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 1: Requirements (ISO/IEC 17021-1:2015) |
| EN 16240:2013 | Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods |
| EN 488:2015 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| UNI EN 1463-1 : 2009 | ROAD MARKING MATERIALS - RETROREFLECTING ROAD STUDS - PART 1: INITIAL PERFORMANCE REQUIREMENTS |
| EN 544:2011 | Bitumen shingles with mineral and/or synthetic reinforcements - Product specification and test methods |
| EN 2680:2006 | Aerospace series - Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS2 lubricated, metric series - Classification: 900 MPa (at ambient temperature) / 235 °C |
| EN 14188-4:2009 | Joint fillers and sealants - Part 4: Specifications for primers to be used with joint sealants |
| UNI EN 13348 : 2008 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR MEDICAL GASES OR VACUUM |
| UNI EN 1168 : 2012 | PRECAST CONCRETE PRODUCTS - HOLLOW CORE SLABS |
| UNI EN 1057 : 2010 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR WATER AND GAS IN SANITARY AND HEATING APPLICATIONS |
| UNI EN 1856-1 : 2009 | CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 1: SYSTEM CHIMNEY PRODUCTS |
| ENV 13481-6 : DRAFT 2002 COR 04 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 6: SPECIAL FASTENING SYSTEMS FOR ATTENUATION OF VIBRATION |
| I.S. EN 12101-6:2005 | SMOKE AND HEAT CONTROL SYSTEMS - PART 6: SPECIFICATION FOR PRESSURE DIFFERENTIAL SYSTEMS - KITS |
| UNI EN 818-1 : 2008 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 1: GENERAL CONDITIONS OF ACCEPTANCE |
| UNI EN 14991 : 2007 | PRECAST CONCRETE PRODUCTS - FOUNDATION ELEMENTS |
| UNI EN 13172 : 2012 | Thermal insulation products - Evaluation of conformity |
| UNI EN 1856-2 : 2009 | CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 2: METAL FLUE LINERS AND CONNECTING FLUE PIPES |
| UNI EN 13240 : 2006 | ROOM-HEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| UNI EN 13481-4 : 2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 4: FASTENING SYSTEMS FOR STEEL SLEEPERS |
| UNI EN ISO 16140 : 2011 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - PROTOCOL FOR THE VALIDATION OF ALTERNATIVE METHODS |
| EN 50103 : 1995 | GUIDANCE ON THE APPLICATION OF EN 29001 AND EN 46001 AND OF EN 29002 AND EN 46002 FOR THE ACTIVE (INCLUDING ACTIVE IMPLANTABLE) MEDICAL DEVICE INDUSTRY |
| UNI EN ISO 14554-1 : 2014 | QUALITY REQUIREMENTS FOR WELDING - RESISTANCE WELDING OF METALLIC MATERIALS - PART 1: COMPREHENSIVE QUALITY REQUIREMENTS |
| UNI EN 12952-5 : 2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
| UNI EN 1990 : 2006 | EUROCODE - BASIS OF STRUCTURAL DESIGN |
| UNI EN 12839 : 2012 | PRECAST CONCRETE PRODUCTS - ELEMENTS FOR FENCES |
| UNI EN 13084-7 : 2013 | FREE-STANDING CHIMNEYS - PART 7: PRODUCT SPECIFICATIONS OF CYLINDRICAL STEEL FABRICATIONS FOR USE IN SINGLE WALL STEEL CHIMNEYS AND STEEL LINERS |
| UNI EN 1051-2 : 2008 | GLASS IN BUILDING - GLASS BLOCKS AND GLASS PAVERS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD |
| UNI EN 15434 : 2010 | GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS) |
| UNI EN 13225 : 2013 | PRECAST CONCRETE PRODUCTS - LINEAR STRUCTURAL ELEMENTS |
| UNI EN 14509 : 2013 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| UNI EN 10223-8 : 2014 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS |
| UNI EN 14783 : 2013 | FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
| UNI EN 12186 : 2014 | GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS |
| UNI EN 13599 : 2014 | COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES |
| UNI EN 13859-2 : 2014 | FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 2: UNDERLAYS FOR WALLS |
| UNI EN 15167-2 : 2006 | GROUND GRANULATED BLAST FURNACE SLAG FOR USE IN CONCRETE, MORTAR AND GROUT - PART 2: CONFORMITY EVALUATION |
| UNI EN 1857 : 2010 | CHIMNEYS - COMPONENTS - CONCRETE FLUE LINERS |
| UNI EN ISO 10451 : 2010 | DENTISTRY - CONTENTS OF TECHNICAL FILE FOR DENTAL IMPLANT SYSTEMS |
| UNI EN 14733 : 2010 | BITUMEN AND BITUMINOUS BINDERS - BITUMINOUS EMULSIONS, FLUXED AND CUT-BACK BITUMEN FACTORY PRODUCTION CONTROL |
| UNI EN 13341 : 2011 | STATIC THERMOPLASTIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED AND ROTATIONALLY MOULDED POLYETHYLENE TANKS AND ROTATIONALLY MOULDED TANKS MADE OF ANIONICALLY POLYMERIZED POLYAMIDE 6 - REQUIREMENTS AND TEST METHODS |
| UNI EN ISO 14554-2 : 2014 | QUALITY REQUIREMENTS FOR WELDING - RESISTANCE WELDING OF METALLIC MATERIALS - PART 2: ELEMENTARY QUALITY REQUIREMENTS |
| IEC 61811-1:2015 | Electromechanical telecom elementary relays of assessed quality - Part 1: Generic specification and blank detail specification |
| UNI EN 1317-5 : 2012 | ROAD RESTRAINT SYSTEMS - PART 5: PRODUCT REQUIREMENTS AND EVALUATION OF CONFORMITY FOR VEHICLE RESTRAINT SYSTEMS |
| UNI EN 15317 : 2013 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC THICKNESS MEASURING EQUIPMENT |
| UNI EN 14342 : 2013 | WOOD FLOORING AND PARQUET - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| UNI EN 520 : 2009 | GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| UNI EN 1654 : 1999 | COPPER AND COPPER ALLOYS - STRIP FOR SPRINGS AND CONNECTORS |
| UNI EN 12899-4 : 2008 | FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 4: FACTORY PRODUCTION CONTROL |
| CSA B51S1 : 2005 | SUPPLEMENT NO. 1 TO B51-03, BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE |
| UNI EN 12952-2 : 2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| UNI EN 12899-3 : 2008 | FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 3: DELINEATOR POSTS AND RETROREFLECTORS |
| UNI EN 13808 : 2013 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CATIONIC BITUMINOUS EMULSIONS |
| EN 100114-1 : 1996 | RULE OF PROCEDURE - QUALITY ASSESSMENT PROCEDURES - PART 1: CECC REQUIREMENTS FOR THE APPROVAL OF AN ORGANIZATION |
| UNI EN 1917 : 2004 | CONCRETE MANHOLES AND INSPECTION CHAMBERS, UNREINFORCED, STEEL FIBRE AND REINFORCED |
| UNI EN 14625 : 2012 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF OZONE BY ULTRAVIOLET PHOTOMETRY |
| UNI EN ISO 10418 : 2005 | PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - ANALYSIS, DESIGN, INSTALLATION AND TESTING OF BASIC SURFACE PROCESS SAFETY SYSTEMS |
| UNI EN 54-23 : 2010 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 23: FIRE ALARM DEVICES - VISUAL ALARM DEVICES |
| EN 15681-2:2017 | Glass in Building - Basic alumino silicate glass products - Part 2: Product standard |
| UNI EN 10219-1 : 2006 | COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| UNI EN 13212 : 2011 | ROAD MARKING MATERIALS - REQUIREMENTS FOR FACTORY PRODUCTION CONTROL |
| UNI EN 1652 : 1999 | COPPER AND COPPER ALLOYS - PLATE, SHEET, STRIP AND CIRCLES FOR GENERAL PURPOSES |
| UNI EN 10255 : 2007 | NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 506 : 2008 | ROOFING PRODUCTS OF METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF COPPER OR ZINC SHEET |
| UNI/TS 11465-1 : 2012 | ELECTRONIC SIGNATURES AND INFRASTRUCTURES (ESI) - DATA PRESERVATION SYSTEMS SECURITY - PART 1: REQUIREMENTS FOR IMPLEMENTATION AND MANAGEMENT |
| UNI EN ISO 15883-1 : 2014 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| UNI EN 13229 : 2006 | INSET APPLIANCES INCLUDING OPEN FIRES FIRED BY SOLID FUELS - REQUIREMENTS AND TEST METHODS |
| UNI EN ISO 11140-3 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 3: CLASS 2 INDICATOR SYSTEMS FOR USE IN THE BOWIE AND DICK-TYPE STEAM PENETRATION TEST |
| EN 683-1:2006 | Aluminium and aluminium alloys - Finstock - Part 1: Technical conditions for inspection and delivery |
| UNI EN 12809 : 2004 | RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS |
| UNI EN 12815 : 2006 | RESIDENTIAL COOKERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| UNI EN 15189 : 2007 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYURETHANE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS |
| UNI EN 12004 : 2012 | ADHESIVES FOR TILES - REQUIREMENTS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
| PD 3542:1991 | The role of standards in company quality management |
| UNI EN 12451 : 2012 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS |
| UNI EN 13956 : 2013 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING - DEFINITIONS AND CHARACTERISTICS |
| UNI EN 14525 : 2005 | DUCTILE IRON WIDE TOLERANCE COUPLINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U PE, FIBRE-CEMENT |
| ONORM EN 14592 : 2012 | TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
| UNI EN 13481-3 : 2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 3: FASTENING SYSTEMS FOR WOOD SLEEPERS |
| UNI EN 13802 : 2014 | RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS |
| UNI EN 14889-1 : 2006 | FIBRES FOR CONCRETE - PART 1: STEEL FIBRES - DEFINITIONS, SPECIFICATION AND CONFORMITY |
| UNI EN 12842 : 2012 | DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS |
| UNI EN 14424 : 2013 | HOSE FITTINGS WITH SCREWED FERRULES |
| UNI EN 10080 : 2005 | STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - GENERAL |
| UNI EN 12420 : 2014 | COPPER AND COPPER ALLOYS - FORGINGS |
| EN 1125:2008 | Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods |
| UNI EN 13224 : 2012 | PRECAST CONCRETE PRODUCTS - RIBBED FLOOR ELEMENTS |
| UNI EN ISO 10380 : 2012 | PIPEWORK - CORRUGATED METAL HOSES AND HOSE ASSEMBLIES |
| UNI EN 14626 : 2012 | AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF CARBON MONOXIDE BY NONDISPERSIVE INFRARED SPECTROSCOPY |
| EN 45510-4-2:1999 | Guide for procurement of power station equipment - Part 4: Boiler auxiliaries - Section 2: Gas-air, steam-air and gas-gas heaters |
| UNI EN 12899-2 : 2008 | FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 2: TRANSILLUMINATED TRAFFIC BOLLARDS (TTB) |
| UNI EN 13859-1 : 2014 | FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 1: UNDERLAYS FOR DISCONTINUOUS ROOFING |
| UNI EN 14449 : 2005 | GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - EVALUATION OF CONFORMITY/PRODUCT STANDARD |
| EN 45510-6-7:1998 | Guide for procurement of power station equipment - Part 6-7: Turbine auxiliaries - Moisture separator reheaters |
| UNI EN ISO 15189 : 2013 | MEDICAL LABORATORIES - REQUIREMENTS FOR QUALITY AND COMPETENCE |
| UNI EN 1559-1 : 2011 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| UNI EN 1344 : 2013 | CLAY PAVERS - REQUIREMENTS AND TEST METHODS |
| UNI EN 13263-2 : 2009 | SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
| UNI EN 969 : 2009 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS |
| UNI EN ISO 15882 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS |
| UNI EN 15015 : 2008 | PLASTICS PIPING SYSTEMS - SYSTEMS FOR HOT AND COLD WATER NOT INTENDED FOR HUMAN CONSUMPTION - PERFORMANCE CHARACTERISTICS FOR PIPES, FITTINGS AND THEIR JOINTS |
| UNI EN 14023 : 2010 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR POLYMER MODIFIED BITUMENS |
| EN ISO 14554-2:2013 | Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements (ISO 14554-2:2013) |
| UNI EN 14889-2 : 2006 | FIBRES FOR CONCRETE - PART 2: POLYMER FIBRES - DEFINITIONS, SPECIFICATIONS AND CONFORMITY |
| UNI EN 14909 : 2012 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF COURSES - DEFINITIONS AND CHARACTERISTICS |
| UNI EN 1594 : 2013 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS |
| UNI EN 15069 : 2009 | SAFETY GAS CONNECTION VALVES FOR METAL HOSE ASSEMBLIES USED FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUEL |
| UNI EN 13674-3 : 2010 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 3: CHECK RAILS |
| EN 490:2011+A1:2017 | Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications |
| UNI EN ISO 14344 : 2010 | WELDING CONSUMABLES - PROCUREMENT OF FILLER MATERIALS AND FLUXES |
| BS OHSAS 18002:2008 | Occupational health and safety management systems. Guidelines for the implementation of OHSAS 18001:2007 |
| UNI EN 54-20 : 2006 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 20: ASPIRATING SMOKE DETECTORS |
| UNI EN 4131 : 2013 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1250 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| UNI EN 14566 : 2009 | MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| UNI EN 14190 : 2014 | GYPSUM BOARD PRODUCTS FROM REPROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| UNI EN ISO 14937 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| UNI EN 13481-7 : 2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 7: SPECIAL FASTENING SYSTEMS FOR SWITCHES AND CROSSINGS AND CHECK RAILS |
| EN 45510-6-1:1998 | Guide for procurement of power station equipment - Part 6-1: Turbine auxiliaries - Deaerators |
| UNI EN 13964 : 2014 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| EN 45510-6-3:1998 | Guide for procurement of power station equipment - Part 6-3: Turbine auxiliaries - Condenser plant |
| IEC 61513:2011 | Nuclear power plants - Instrumentation and control important to safety - General requirements for systems |
| EN 45510-8-1:1998 | Guide for procurement of power station equipment - Part 8-1: Control and instrumentation |
| UNI EN 14800 : 2007 | CORRUGATED SAFETY METAL HOSE ASSEMBLIES FOR THE CONNECTION DOMESTIC APPLIANCES USING GASEOUS FUELS |
| UNI EN 13616 : 2004 | OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS |
| UNI EN 1947 : 2014 | FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES |
| I.S. EN 14525:2005 | DUCTILE IRON WIDE TOLERANCE COUPLINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U PE, FIBRE-CEMENT |
| UNI EN 14250 : 2010 | TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED STRUCTURAL MEMBERS ASSEMBLED WITH PUNCHED METAL PLATE FASTENERS |
| OVE/ONORM EN 60987 : 2015 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - HARDWARE DESIGN REQUIREMENTS FOR COMPUTER-BASED SYSTEMS (IEC 60987:2007 + A1:2013) |
| UNI EN 14901 : 2014 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING (HEAVY DUTY) OF DUCTILE IRON FITTINGS AND ACCESSORIES - REQUIREMENTS AND TEST METHODS |
| UNI EN 14125 : 2013 | THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS |
| UNI EN 12450 : 2013 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER CAPILLARY TUBES |
| EN 45510-5-1:1998 | Guide for procurement of power station equipment - Part 5-1: Steam turbines |
| UNI EN 13411-6 : 2009 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET |
| UNI EN 14382 : 2009 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| EN 13204:2016 | Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements |
| UNI EN 545 : 2010 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS |
| UNI EN 12953-2 : 2012 | SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| UNI EN 16590-2 : 2014 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE |
| UNI EN 14604 : 2005 | SMOKE ALARM DEVICES |
| UNI EN 1319 : 2010 | DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN- ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW |
| UNI EN 14384 : 2006 | PILLAR FIRE HYDRANTS |
| UNI EN 1304 : 2013 | CLAY ROOFING TILES AND FITTINGS - PRODUCT DEFINITIONS AND SPECIFICATIONS |
| EN 607:2004 | Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing |
| UNI EN 1492-4 : 2009 | TEXTILE SLINGS - SAFETY - PART 4: LIFTING SLINGS FOR GENERAL SERVICE MADE FROM NATURAL AND MAN-MADE FIBRE ROPES |
| UNI EN ISO 14161 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| UNI EN 13411-1 : 2009 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 1: THIMBLES FOR STEEL WIRE ROPE SLINGS |
| EN 45510-5-4:1998 | Guide for procurement of power station equipment - Part 5-4: Hydraulic turbines, storage pumps and pump-turbines |
| EN 45510-5-2:1998 | Guide for procurement of power station equipment - Part 5-2: Gas turbines |
| UNI EN 10021 : 2007 | GENERAL TECHNICAL DELIVERY CONDITIONS FOR STEEL PRODUCTS |
| UNI EN 544 : 2011 | BITUMEN SHINGLES WITH MINERAL AND/OR SYNTHETIC REINFORCEMENTS - PRODUCT SPECIFICATION AND TEST METHODS |
| UNI EN 14246 : 2006 | GYPSUM ELEMENTS FOR SUSPENDED CEILINGS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| UNI EN 14419 : 2009 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - SURVEILLANCE SYSTEMS |
| UNI EN 13279-1 : 2008 | GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
| UNI EN ISO 10472-1 : 2009 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS |
| UNI EN 1916 : 2004 | CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED |
| UNI EN 13950 : 2014 | GYPSUM BOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| UNI EN 14211 : 2012 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF NITROGEN DIOXIDE AND NITROGEN MONOXIDE BY CHEMILUMINESCENCE |
| UNI EN 14785 : 2006 | RESIDENTIAL SPACE HEATING APPLIANCES FIRED BY WOOD PELLETS - REQUIREMENTS AND TEST METHODS |
| UNI CEI EN ISO/IEC 19796-1 : 2010 | INFORMATION TECHNOLOGY - LEARNING, EDUCATION AND TRAINING - QUALITY MANAGEMENT, ASSURANCE AND METRICS - PART 1: GENERAL APPROACH |
| UNI EN 14540 : 2014 | FIRE-FIGHTING HOSES - NON-PERCOLATING LAYFLAT HOSES FOR FIXED SYSTEMS |
| UNI EN 12452 : 2012 | COPPER AND COPPER ALLOYS - ROLLED, FINNED, SEAMLESS TUBES FOR HEAT EXCHANGERS |
| UNI EN 1422 : 2014 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| UNI EN 534 : 2010 | CORRUGATED BITUMEN SHEETS - PRODUCT SPECIFICATION AND TEST METHODS |
| UNI EN ISO 1461 : 2009 | HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS |
| UNI EN 12952-6 : 2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 6: INSPECTION DURING CONSTRUCTION; DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER |
| UNI EN 13963 : 2014 | JOINTING MATERIALS FOR GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| UNI EN 12385-1 : 2009 | STEEL WIRE ROPES - SAFETY - PART 1: GENERAL REQUIREMENTS |
| UNI EN 13967 : 2012 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF SHEETS INCLUDING PLASTIC AND RUBBER BASEMENT TANKING SHEET - DEFINITIONS AND CHARACTERISTICS |
| UNI EN 12899-1 : 2008 | FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 1: FIXED SIGNS |
| EN 45510-4-9:1999 | Guide for procurement of power station equipment - Part 4-9: Boiler auxiliaries - Sootblowers |
| UNI EN 13602 : 2013 | COPPER AND COPPER ALLOYS - DRAWN, ROUND COPPER WIRE FOR THE MANUFACTURE OF ELECTRICAL CONDUCTORS |
| BS 7799-2(2005) : 2005 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - REQUIREMENTS |
| UNI EN 13022-2 : 2014 | GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - PART 2: ASSEMBLY RULES |
| EN 45510-2-9:2008 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-9: ELECTRICAL EQUIPMENT - CABLING SYSTEMS |
| UNI EN 1858 : 2012 | CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS |
| EN 45510-1:1997 | Guide for procurement of power station equipment - Part 1: Common clauses |
| UNI EN 1423 : 2012 | ROAD MARKING MATERIALS - DROP ON MATERIALS - GLASS BEADS, ANTISKID AGGREGATES AND MIXTURES OF THE TWO |
| UNI EN 12583 : 2014 | GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS |
| UNI EN 14411 : 2012 | CERAMIC TILES - DEFINITIONS, CLASSIFICATION, CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| UNI EN 13148 : 2010 | COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP |
| UNI EN 1790 : 2013 | ROAD MARKING MATERIALS - PREFORMED ROAD MARKINGS |
| UNI EN 14422 : 2013 | CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES |
| UNI EN 1401-1 : 2009 | PLASTICS PIPING SYSTEMS FOR NON- PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| UNI EN 14420-1 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, TYPES OF FIXING AND CONNECTION, DESIGNATION AND TESTING |
| UNI EN ISO 15743 : 2008 | ERGONOMICS OF THE THERMAL ENVIRONMENT - COLD WORKPLACES - RISK ASSESSMENT AND MANAGEMENT |
| UNI ISO 13053-2 : 2014 | QUANTITATIVE METHODS IN PROCESS IMPROVEMENT - SIX SIGMA - PART 2: TOOLS AND TECHNIQUES |
| UNI EN 12326-1 : 2014 | SLATE AND STONE FOR DISCONTINUOUS ROOFING AND EXTERNAL CLADDING - PART 1: SPECIFICATIONS FOR SLATE AND CARBONATE SLATE |
| UNI EN 12591 : 2009 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
| UNI EN 179 : 2008 | BUILDING HARDWARE - EMERGENCY EXIT DEVICES OPERATED BY A LEVER HANDLE OR PUSH PAD, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| UNI EN 598 : 2009 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| UNI EN ISO 11980 : 2013 | OPHTHALMIC OPTICS - CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - GUIDANCE FOR CLINICAL INVESTIGATIONS |
| UNI EN 10223-3 : 2014 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES |
| UNI EN 15827 : 2011 | RAILWAY APPLICATIONS - REQUIREMENTS FOR BOGIES AND RUNNING GEARS |
| UNI EN 13015 : 2008 | MAINTENANCE FOR LIFTS AND ESCALATORS - RULES FOR MAINTENANCE INSTRUCTIONS |
| EN 45510-6-2:1998 | Guide for procurement of power station equipment - Part 6-2: Turbine auxiliaries - Feedwater heaters |
| UNI EN 13707 : 2013 | FLEXIBLE SHEETS FOR WATERPROOFING - REINFORCED BITUMEN SHEETS FOR ROOF WATERPROOFING - DEFINITIONS AND CHARACTERISTICS |
| UNI EN 12446 : 2011 | CHIMNEYS - COMPONENTS - CONCRETE OUTER WALL ELEMENTS |
| UNI EN ISO 19900 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - GENERAL REQUIREMENTS FOR OFFSHORE STRUCTURES |
| UNI EN 1125 : 2008 | BUILDING HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| UNI EN 13604 : 2013 | COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER |
| AQAP 2120 : 2009-10 | NATO QUALITY ASSURANCE REQUIREMENTS FOR PRODUCTION |
| UNE-EN 54-16:2010 | Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment |
| AAMI ISO 11607-1 : 2006 : R2010 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS, AND PACKAGING SYSTEMS |
| ISO/IEC 24760-1:2011 | Information technology Security techniques A framework for identity management Part 1: Terminology and concepts |
| 17/30357430 DC | BS EN 13658-2. Metal lath and beads. Definitions, requirements and test methods. Part 2. External rendering |
| CEI UNI EN 45510-3-3 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 3-3: BOILERS - BOILERS WITH FLUIDIZED BED FIRING |
| DIN EN 54-3:2014-09 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS |
| API 2CCU : 2017 | OFFSHORE CARGO CARRYING UNITS |
| ASTM F 2885 : 2017 : REDLINE | Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications |
| DIN ISO 37500:2015-08 | GUIDANCE ON OUTSOURCING (ISO 37500:2014) |
| CSA ISO 11607-1 : 2016 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
| UNI ISO 2230 : 2009 | RUBBER PRODUCTS - GUIDELINES FOR STORAGE |
| UNI EN 16222 : 2012 | CATHODIC PROTECTION OF SHIP HULLS |
| UNI CEN/TS 15718 : 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - PRODUCT REQUIREMENTS FOR CAST WHEELS |
| DIN EN 16240:2014-03 | LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| 07/30164493 DC : 0 | BS EN 14637 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED HOLD-OPEN SYSTEMS FOR FIRE/SMOKE DOOR ASSEMBLIES - REQUIREMENTS, TEST METHODS, APPLICATIONS AND MAINTENANCE |
| 11/30240441 DC : 0 | BS EN 54-28 - FIRE DETECTION AND FIRE ALARM SYSTEM - PART 28: NON-RESET TABLE LINE TYPE HEAT DETECTORS |
| CSA ISO 19900 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - GENERAL REQUIREMENTS FOR OFFSHORE STRUCTURES |
| 14/30279136 DC : 0 | BS EN 50405 - RAILWAY APPLICATIONS - CURRENT COLLECTION SYSTEMS - PANTOGRAPHS, TESTING METHODS FOR CARBON CONTACT STRIPS |
| 12/30260516 DC | BS EN 15250 - SLOW HEAT RELEASE APPLIANCES FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| BS ISO 10276:2010 | Nuclear energy. Fuel technology. Trunnions for packages used to transport radioactive material |
| BS EN 12467 : 2012 | FIBRE-CEMENT FLAT SHEETS - PRODUCT SPECIFICATION AND TEST METHODS |
| UNI CEN/TS 14632 : 2012 | PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITTY |
| MSS SP 147 : 2014 | QUALITY STANDARD FOR STEEL CASTINGS USED IN STANDARD CLASS STEEL VALVES - SAMPLING METHOD FOR EVALUATING CASTING QUALITY |
| BIS IS/ISO/TS 16949 : 2009 | QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS |
| SAE ARP 5021 : 2016 | OXYGEN CYLINDER INSTALLATION GUIDE |
| BS ISO 55001:2014 | Asset management. Management systems. Requirements |
| BS ISO 37101:2016 | Sustainable development in communities. Management system for sustainable development. Requirements with guidance for use |
| BS ISO 19114 : 2003 AMD 15568 | GEOGRAPHIC INFORMATION - QUALITY EVALUATION PROCEDURES |
| DIN EN 16475-2:2013-08 (Draft) | CHIMNEYS - ACCESSORIES - PART 2: CHIMNEY FANS - REQUIREMENTS AND TEST METHODS |
| PD CEN/TR 15628:2007 | Maintenance. Qualification of maintenance personnel |
| DIN EN 13282-3:2015-06 | Hydraulic road binders - Part 3: Conformity evaluation |
| BS ISO 13053-2:2011 | Quantitative methods in process improvement. Six Sigma Tools and techniques |
| 17/30340308 DC : 0 | BS ISO 21001 - EDUCATIONAL ORGANIZATIONS - MANAGEMENT SYSTEMS FOR EDUCATIONAL ORGANIZATIONS - REQUIREMENTS WITH GUIDANCE FOR USE |
| UNI EN ISO 10993-1 : 2010 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS |
| ISO/IEC TR 29110-5-1-3:2017 | Systems and software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 5-1-3: Software engineering — Management and engineering guide: Generic profile group — Intermediate profile |
| UNI EN 508-2 : 2008 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM |
| ISO 25119-2:2010 | Tractors and machinery for agriculture and forestry Safety-related parts of control systems Part 2: Concept phase |
| DIN EN 16397-2:2015-01 | FLEXIBLE COUPLINGS - PART 2: CHARACTERISTICS AND TESTING FOR METAL BANDED FLEXIBLE COUPLINGS, ADAPTORS AND BUSHES |
| 15/30270299 DC : 0 | BS EN 16910 - RAILWAY APPLICATIONS - ROLLING STOCK - REQUIREMENTS FOR NONDESTRUCTIVE TESTING ON RUNNING GEAR IN RAILWAY MAINTENANCE |
| UNI CEN/TS 12201-7 : 2014 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| UNI EN 16590-4 : 2014 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 4: PRODUCTION, OPERATION, MODIFICATION AND SUPPORTING PROCESSES |
| UNI EN 15322 : 2013 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| ISO 115:2003 | Unalloyed aluminium ingots for remelting — Classification and composition |
| 16/30339594 DC : DRAFT DEC 2016 | BS EN 50129 - RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SAFETY RELATED ELECTRONIC SYSTEMS FOR SIGNALLING |
| UNE-ISO 10002:2015 | Quality management -- Customer satisfaction -- Guidelines for complaints handling in organizations |
| 10/30217405 DC : 0 | BS EN 50556 - ROAD TRAFFIC SIGNAL SYSTEMS |
| I.S. EN 50126-1:2017 | RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 1: GENERIC RAMS PROCESS |
| DIN EN ISO 17663:2009-10 | Welding - Quality requirements for heat treatment in connection with welding and allied processes (ISO 17663:2009) |
| BIS IS 13771 : 2013 | LIVE WORKING - CONDUCTIVE CLOTHING FOR USE AT NOMINAL VOLTAGE UP TO 800 KV A.C. AND +/-600 KV D.C. |
| DIN EN ISO 19258:2016-05 (Draft) | SOIL QUALITY - GUIDANCE ON THE DETERMINATION OF BACKGROUND VALUES |
| 17/30354084 DC : 0 | BS EN 16855-2 - WALK-IN COLD ROOMS - DEFINITION, THERMAL INSULATION PERFORMANCE AND TEST METHODS - PART 2: CUSTOMIZED COLD ROOMS |
| API 621 REDLINE : 2010 | RECONDITIONING OF METALLIC GATE, GLOBE, AND CHECK VALVES |
| I.S. CEN TR 15367-3:2009 | PETROLEUM PRODUCTS - GUIDE FOR GOOD HOUSEKEEPING - PART 3: PREVENTION OF CROSS CONTAMINATION |
| BS EN 60694:1997 | Common specifications for high-voltage switchgear and controlgear standards |
| AQAP 100 : 3 | POLICY ON AN INTEGRATED SYSTEMS APPROACH TO QUALITY THROUGH THE LIFE CYCLE |
| ASTM D 5486/D5486M : 2006 : R2012 | Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing |
| DIN EN 10343:2009-07 | STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS |
| CSA Z24512 : 2010 : R2014 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE MANAGEMENT OF DRINKING WATER UTILITIES AND FOR THE ASSESSMENT OF DRINKING WATER SERVICES |
| EN 50657:2017 | Railways Applications - Rolling stock applications - Software on Board Rolling Stock |
| 03/102273 DC : DRAFT MAR 2003 | BS ISO 13448-0 - ACCEPTANCE SAMPLING PROCEDURES BASED ON THE ALLOCATION OF PRIORITIES PRINCIPLES (APP) - PART 1: GUIDELINES FOR THE APP APPROACH |
| PD IEC/TS 62239-2:2017 | Process management for avionics. Management plan Preparation and maintenance of an electronic COTS assembly management plan |
| 04/30111056 DC : DRAFT MARCH 2004 | EN 1806 - CHIMNEYS - CLAY/CERAMIC FLUE BLOCKS FOR SINGLE WALL CHIMNEYS - REQUIREMENTS AND TEST METHODS |
| S.R. CEN/TS 1852-2:2015 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| EN ISO 7396-1:2016 | Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016) |
| ASTM F 2146 : 2013 : REDLINE | Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320) |
| I.S. EN 60896-21:2004 | STATIONARY LEAD-ACID BATTERIES - PART 21: VALVE REGULATED TYPES - METHODS OF TEST |
| DIN EN 16497-1:2015-05 | CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 1: NON-BALANCED FLUE APPLICATIONS |
| 04/30105027 DC : DRAFT JUNE 2004 | ISO 21789 - GAS TURBINES - SAFETY |
| PREN 862 : DRAFT 2015 | PACKAGING - CHILD-RESISTANT PACKAGING - REQUIREMENTS AND TESTING PROCEDURES FOR NON-RECLOSABLE PACKAGES FOR NONPHARMACEUTICAL PRODUCTS |
| 03/307007 DC : DRAFT APR 2003 | ISO 20683-1 - AIR GROUND EQUIPMENT - DESIGN, TESTING AND MAINTENANCE REQUIREMENTS FOR TOWBARLESS TOWING VEHICLES - PART 1: TRANSPORT AIRCRAFT WITH A MAXIMUM RAMP MASS OVER 50 000 KG (110 000 LB) |
| BS ISO 14949:2001 | Implants for surgery. Two-part addition-cure silicone elastomers |
| DIN ISO 18436-3:2013-05 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 3: REQUIREMENTS FOR TRAINING BODIES AND THE TRAINING PROCESS (ISO 18436-3:2012) |
| BS ISO 9940:2015 | Aerospace series. Fluid, hydraulic, phosphate ester-base, fire resistant. Technical specification |
| DIN EN 15542:2008-06 | Ductile iron pipes, fittings and accessories - External cement mortar coating for pipes - Requirements and test methods |
| ASTM E 1977 : 2012-03 | SPECIFICATION FOR SHELTER, TACTICAL, EXPANDABLE, ONE-SIDE |
| CSA ISO/IEC 90003 : 2004 : R2014 | SOFTWARE ENGINEERING - GUIDELINES FOR THE APPLICATION OF ISO 9001:2000 TO COMPUTER SOFTWARE |
| 16/30341010 DC : 0 | BS EN 50239 - RAILWAY APPLICATIONS - RADIO REMOTE CONTROL SYSTEM OF TRACTION VEHICLE FOR SHUNTING TRAFFIC |
| PREN 13802 : DRAFT 2012 | RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS |
| PREN 12842 : DRAFT 2010 | DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS |
| BS ISO 8255-2:2013 | Microscopes. Cover glasses Quality of materials, standards of finish and mode of packaging |
| I.S. EN 45510-2-9:2008 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-9: ELECTRICAL EQUIPMENT - CABLING SYSTEMS |
| DIN EN 12668-1:2010-05 | Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments |
| PREN 1463-1 : DRAFT 2008 | ROAD MARKING MATERIALS - RETROREFLECTING ROAD STUDS - PART 1: INITIAL PERFORMANCE REQUIREMENTS |
| API TR 18TR4 : 2017 | EVALUATION OF WELDING REQUIREMENTS AS APPLICABLE TO API PRODUCT SPECIFICATIONS |
| 14/30296344 DC : 0 | BS EN 3820 - AEROSPACE SERIES - METRIC BOLTS, NORMAL HEXAGON HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION; 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| NASA STD 8739.8 : 2004 | SOFTWARE ASSURANCE STANDARD |
| 09/30199026 DC : 0 | BS ISO/IEC 17021-2 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS AND REQUIREMENTS FOR THIRD-PARTY CERTIFICATION AUDITING OF MANAGEMENT SYSTEMS - PART 2: REQUIREMENTS FOR THIRD PARTY CERTIFICATION AUDITING OF MANAGEMENT SYSTEMS |
| 14/30244508 DC : 0 | BS EN 62366-1 - MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
| I.S. EN 61869-1:2009 | INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 12004:2007 | ADHESIVES FOR TILES - REQUIREMENTS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
| CSA Z11137-3 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS |
| UNI EN 15344 : 2008 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYETHYLENE (PE) RECYCLATES |
| UNI CEI ISO/IEC TR 20000-3 : 2010 | INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 3: GUIDANCE ON SCOPE DEFINITION AND APPLICABILITY OF ISO/IEC 20000-1 |
| UNI EN 9104-003 : 2011 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 003: REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM (AQMS) AUDITOR TRAINING AND QUALIFICATION |
| BS EN ISO 13408-3:2011 | Aseptic processing of health care products Lyophilization |
| ISO 17680:2015 | Tourism and related services Thalassotherapy Service requirements |
| UNI CEN/TR 14245 : 2015 | CEMENT - GUIDELINES FOR THE APPLICATION OF EN 197-2 CONFORMITY EVALUATION |
| BS ISO 28001:2007 | Security management systems for the supply chain. Best practices for implementing supply chain security, assessments and plans. Requirements and guidance |
| UNI EN 14545 : 2009 | TIMBER STRUCTURES - CONNECTORS - REQUIREMENTS |
| BS EN 16590-1:2014 | Tractors and machinery for agriculture and forestry. Safety-related parts of control systems General principles for design and development |
| SAE AS 5901 : 2014 | WATER SPRAY AND HIGH HUMIDITY ENDURANCE TEST METHODS FOR SAE AMS1424 AND SAE AMS1428 AIRCRAFT DEICING/ANTI-ICING FLUIDS |
| UTEC 96 027-1 : 2011 | ELECTRONIC EQUIPMENT OBSOLESCENCE - GUIDE APPLIED OBSOLESCENCE MANAGEMENT |
| CLC/TS 50537-1:2010 | Railway applications - Mounted parts of the traction transformer and cooling system - Part 1: HV bushing for traction transformers |
| I.S. ISO 15489-1:2004 | INFORMATION AND DOCUMENTATION - RECORDS MANAGEMENT - PART 1: GENERAL |
| 07/30043552 DC : 0 | BS 5385-4 - WALL AND FLOOR TILING - PART 4: DESIGN AND INSTALLATION OF CERAMIC AND MOSAIC TILING IN SPECIAL CONDITIONS - CODE OF PRACTICE |
| XP X43 401 : 98 XP | AIR QUALITY - QUALITY AUDIT OF THE AIR IN NON-INDUSTRIAL PREMISES - BUILDINGS FOR OFFICE USE AND SIMILAR PREMISES |
| BS EN 62309:2004 | Dependability of products containing reused parts. Requriements for functionality and tests |
| 03/652496 DC : DRAFT JUNE 2003 | ISO/IEC TR 15443-1 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - A FRAMEWORK FOR IT SECURITY ASSURANCE - PART 1: OVERVIEW AND FRAMEWORK |
| BS ISO 16142-2:2017 | Medical devices. Recognized essential principles of safety and performance of medical devices General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards |
| 07/30042142 DC : 0 | BS ISO 10276 - NUCLEAR ENERGY - FUEL TECHNOLOGY - TRUNNIONS FOR PACKAGES USED TO TRANSPORT RADIOACTIVE MATERIAL |
| SBAC TS 157 : 6 | AEROSPACE SECTOR CERTIFICATION SCHEME (ASCS) - REQUIREMENTS AND PROCEDURES |
| BS EN 13924-2:2014 | Bitumen and bituminous binders. Specification framework for special paving grade bitumen Multigrade paving grade bitumens |
| 12/30267886 DC : 0 | BS EN 16484 - LEATHER - GUIDELINES FOR THE DETERMINATION OF THE ORIGIN OF LEATHER |
| 96/108457 DC : DRAFT NOV 1996 | PREN 12650-2 - BUILDING HARDWARE - POWERED PEDESTRIAN DOORS - PART 2: SAFETY AT POWERED PEDESTRIAN DOORS |
| BS EN 124-5:2015 | Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of composite materials |
| 10/30234625 DC : 0 | BS EN 14420-1 - HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, SURVEY, DESIGNATION AND TESTING |
| PD ISO Guide 34:2009 | General requirements for the competence of reference material producers |
| I.S. EN 16647:2015 | FIREPLACES FOR LIQUID FUELS - DECORATIVE APPLIANCES PRODUCING A FLAME USING ALCOHOL BASED OR GELATINOUS FUEL - USE IN PRIVATE HOUSEHOLDS |
| CEI UNI EN 45510-4-5 : 2006 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-5: BOILER AUXILIARIES - COAL HANDLING AND BULK STORAGE PLANT |
| PREN 1330-1 : DRAFT 2014 | NON-DESTRUCTIVE TESTING - TERMINOLOGY - PART 1: LIST OF GENERAL TERMS |
| BS EN 19694-1:2016 | Stationary source emissions. Determination of greenhouse gas (GHG) emissions in energy-intensive industries General aspects |
| DIN EN 14353:2016-02 (Draft) | METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| 12/30260570 DC : 0 | BS EN 50341-1 - OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS |
| PREN 15001-2 : DRAFT 2017 | GAS SUPPLY SYSTEMS - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 2: DETAILED FUNCTIONAL REQUIREMENTS FOR COMMISSIONING, OPERATION AND MAINTENANCE |
| 10/30233185 DC : 0 | BS EN 12467 - FIBRE-CEMENT FLAT SHEETS - PRODUCT SPECIFICATION AND TEST METHODS |
| 04/30118524 DC : DRAFT AUG 2004 | EN 1057 - COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR WATER AND GAS IN SANITARY AND HEATING APPLICATIONS |
| PREN 14236 : DRAFT 2017 | ULTRASONIC DOMESTIC GAS METERS |
| BS IEC 62566 : 2012 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - DEVELOPMENT OF HDL-PROGRAMMED INTEGRATED CIRCUITS FOR SYSTEMS PERFORMING CATEGORY A FUNCTIONS |
| 11/30247723 DC : 0 | BS IEC 60571 - RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK |
| ISO 10005:2005 | Quality management systems Guidelines for quality plans |
| ISO 16038:2017 | Male condoms — Guidance on the use of ISO 4074 and ISO 23409 in the quality management of condoms |
| PD ISO/TR 28380-3:2014 | Health informatics. IHE global standards adoption Deployment |
| BS ISO 16049-1:2013 | Air cargo equipment. Restraint straps Design criteria and testing methods |
| IEC TS 62607-4-4:2016 | Nanomanufacturing - Key control characteristics - Part 4-4: Nano-enabled electrical energy storage - Thermal characterization of nanomaterials, nail penetration method |
| 12/30259695 DC : 0 | BS EN 14314:2009/A1 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
| DD CEN/TS 14758-2:2007 | Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene with mineral modifier(s) (PP-MD) Guidance for the assessment of conformity |
| BS EN 14587-3:2012 | Railway applications. Track. Flash butt welding of rails Welding in association with crossing construction |
| 11/30247214 DC : 0 | BS EN 9104-001 - REQUIREMENTS FOR AVIATION, SPACE, AND DEFENSE QUALITY MANAGEMENT SYSTEM CERTIFICATION PROGRAMS |
| CAN/CSA-ISO/IEC/IEEE 15288:16 | Systems and software engineering - System life cycle processes (Adopted ISO/IEC/IEEE 15288:2015, first edition, 2015-05-15) |
| DIN EN 1013:2015-03 | LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| CEI UNI EN 45510-7-2 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION PLANT, EQUIPMENT AND SYSTEMS - PART 7-2: PIPEWORK AND VALVES - BOILER AND HIGH PRESSURE PIPING VALVES |
| BS EN 15827:2011 | Railway applications. Requirements for bogies and running gears |
| I.S. EN 12809:2001 | RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS |
| UNE-EN 1254-8:2013 | Copper and copper alloys - Plumbing fittings - Part 8: Fittings with press ends for use with plastics and multilayer pipes |
| I.S. EN 295-10:2005 | VITRIFIED CLAY PIPES AND FITTINGS AND PIPE JOINTS FOR DRAINS AND SEWERS - PART 10: PERFORMANCE REQUIREMENTS |
| BS ISO 8009:2014 | Mechanical contraceptives. Reusable natural and silicone rubber contraceptive diaphragms. Requirements and tests |
| UNI EN ISO 11135 : 2014 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ISO/TS 8000-150:2011 | Data quality Part 150: Master data: Quality management framework |
| BS EN ISO 16961:2015 | Petroleum, petrochemical and natural gas industries. Internal coating and lining of steel storage tanks |
| 07/30158994 DC : 0 | BS EN 54-22 - FIRE DETECTION AND FIRE ALARM SYSTEM - PART 22: LINE TYPE HEAT DETECTORS |
| 10/30214970 DC : 0 | BS EN 13616 - OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS |
| 00/244828 DC : DRAFT OCT 2000 | IEC 61983 ED. 1.0 - MEASUREMENT AND EVALUATION OF HIGH FREQUENCY (9 KHZ TO 300 GHZ) ELECTROMAGNETIC FIELDS WITH REGARD TO HUMAN EXPOSURE |
| DIN 33870-2:2013-12 | OFFICE MACHINES - REQUIREMENTS AND TESTS FOR THE PREPARATION OF REFILLED TONER MODULES FOR ELECTROPHOTOGRAPHICAL PRINTER, COPIERS AND FACSIMILE MACHINES - PART 2: 4-COLOUR-PRINTERS |
| CEI EN 62138 : 2011 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT FOR SAFETY - SOFTWARE ASPECTS FOR COMPUTER-BASED SYSTEMS PERFORMING CATEGORY B OR C FUNCTIONS |
| CEI UNI EN 45510-4-3 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-3: BOILER AUXILIARIES - DRAUGHT PLANT |
| 09/30206982 DC : 0 | BS EN 9137 - QUALITY MANAGEMENT SYSTEMS - GUIDANCE FOR THE APPLICATION OF AQAP 2110 WITHIN AN 9100:2009 QUALITY MANAGEMENT SYSTEM |
| ISO 28001:2007 | Security management systems for the supply chain Best practices for implementing supply chain security, assessments and plans Requirements and guidance |
| I.S. EN ISO 16228:2018 | FASTENERS - TYPES OF INSPECTION DOCUMENTS (ISO 16228:2017) |
| BS ISO/IEC 12207:1995 | Information technology. Software life cycle processes |
| I.S. EN 54-30:2015 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 30: MULTI-SENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF CARBON MONOXIDE AND HEAT SENSORS |
| UNI EN 15381 : 2008 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN PAVEMENTS AND ASPHALT OVERLAYS |
| DIN EN 54-22:2015-07 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 22: RESETTABLE LINE-TYPE HEAT DETECTORS |
| 17/30296747 DC : 0 | BS EN 15650 - VENTILATION FOR BUILDINGS - FIRE DAMPERS |
| BS EN 54-16:2008 | Fire detection and fire alarm systems Voice alarm control and indicating equipment |
| 09/30170243 DC : 0 | BS EN 54-12 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 12: SMOKE DETECTORS - LINE DETECTORS USING AN OPTICAL BEAM |
| I.S. EN 13616:2004 | OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS |
| 14/30292449 DC : 0 | BS EN 1013:2012/A1 - LIGHT TRANSMITTING SINGLE SKIN PROFIELD PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| S.R. CEN ISO/TS 14907-1:2015 | ELECTRONIC FEE COLLECTION - TEST PROCEDURES FOR USER AND FIXED EQUIPMENT - PART 1: DESCRIPTION OF TEST PROCEDURES (ISO/TS 14907-1:2015) |
| I.S. EN 556-2:2015 | STERILIZATION OF MEDICAL DEVICES - REQUIREMENTS FOR MEDICAL DEVICES TO BE DESIGNATED 'STERILE' - PART 2: REQUIREMENTS FOR ASEPTICALLY PROCESSED MEDICAL DEVICES |
| I.S. EN 13291-1:1999 | SPACE PRODUCTS ASSURANCE - GENERAL REQUIREMENTS - PART 1: POLICY AND PRINCIPLES |
| UNI EN ISO 17663 : 2010 | WELDING - QUALITY REQUIREMENTS FOR HEAT TREATMENT IN CONNECTION WITH WELDING AND ALLIED PROCESSES |
| BS ISO 13007-5:2015 | Ceramic tiles. Grouts and adhesives Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic tiling bonded with adhesives |
| PREN 14424 : DRAFT 2010 | HOSE FITTINGS WITH SCREWED FERRULES |
| PREN 50126-1 : DRAFT 2015 | RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 1: GENERIC RAMS PROCESS |
| DD CLC/TS 50537-4:2010 | Railway applications. Mounted parts of the traction transformer and cooling system Gas and liquid actuated (Buchholz) relay for liquid immersed transformers and reactors with conservator for rail vehicles |
| PREN 14508 : DRAFT 2015 | POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF THE TRANSIT TIME OF END-TO-END SERVICES FOR SINGLE PIECE NON-PRIORITY MAIL AND SECOND CLASS MAIL |
| PD ISO/TR 31004:2013 | Risk management. Guidance for the implementation of ISO 31000 |
| BS ISO 16691:2014 | Space systems. Thermal control coatings for spacecraft. General requirements |
| 03/109280 DC : DRAFT AUG 2003 | BS ISO 14004 - ENVIRONMENTAL MANAGEMENT SYSTEMS - GENERAL GUIDELINES ON PRINCIPLES, SYSTEMS AND SUPPORTING TECHNIQUES |
| ISO 11607-2:2006 | Packaging for terminally sterilized medical devices Part 2: Validation requirements for forming, sealing and assembly processes |
| CSA INFORMATION SECURITY PACKAGE : 2018 | CONSISTS OF CAN/CSA-ISO/IEC 27000:18 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY; CAN/CSA-ISO/IEC 27001:14, INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - REQUIREMENTS; CAN/CSA-ISO/IEC 27002:15 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - CODE OF PRACTICE FOR INFORMATION |
| CR 14269:2001 | Chemicals used for treatment of water intended for human consumption - Guidelines for the purchase |
| I.S. EN ISO 6789:2003 | ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - REQUIREMENTS AND TEST METHODS FOR DESIGN CONFORMANCE TESTING, QUALITY CONFORMANCE TESTING AND RECALIBRATION PROCEDURE |
| UNI EN 15221-3 : 2011 | FACILITY MANAGEMENT - PART 3: GUIDANCE ON QUALITY IN FACILITY MANAGEMENT |
| 17/30353409 DC : 0 | BS 15276-1 - FIXED FIREFIGHTING SYSTEMS - CONDENSED AEROSOL EXTINGUISHING SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| PREN 544 : DRAFT 2010 | BITUMEN SHINGLES WITH MINERAL AND/OR SYNTHETIC REINFORCEMENTS - PRODUCT SPECIFICATION AND TEST METHODS |
| BS ISO 50001 : 2011 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| GS NFV-REL 005 : 1.1.1 | NETWORK FUNCTIONS VIRTUALISATION (NFV); ACCOUNTABILITY; REPORT ON QUALITY ACCOUNTABILITY FRAMEWORK |
| 16/30278559 DC : 0 | BS ISO 18796-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF CARBON STEEL PROCESS VESSELS - PART 1: TECHNICAL REQUIREMENTS |
| BS ISO 20121:2012 | Event sustainability management systems. Requirements with guidance for use |
| ASTM F 2044 : 2009 : R2019 : EDT 1 | Standard Specification for Liquid Level Indicating Equipment, Electrical |
| BS ISO 10008:2013 | Quality management. Customer satisfaction. Guidelines for business-to-consumer electronic commerce transactions |
| PD CEN/TS 1452-7:2014 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
| I.S. EN 14408-1:2004 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 1: GENERAL |
| ISO 2531:2009 | Ductile iron pipes, fittings, accessories and their joints for water applications |
| BS ISO 21927-7:2017 | Smoke and heat control systems Smoke ducts sections |
| I.S. EN 15282:2007 | VITREOUS AND PORCELAIN ENAMELS - DESIGN OF BOLTED STEEL TANKS FOR THE STORAGE OR TREATMENT OF WATER OR MUNICIPAL OR INDUSTRIAL EFFLUENTS AND SLUDGES |
| 12/30274804 DC : 0 | BS IEC 61189-5-4 ED.1 - TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-4: TEST METHODS FOR PRINTED BOARD ASSEMBLIES: SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID WIRE |
| 11/30251985 DC : 0 | BS EN 13950 - GYPSUM PLASTERBOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| BS PD IEC 62239 : 2001 | ELECTRONIC COMPONENT MANAGEMENT PLANS |
| 03/101011 DC : 0 | EN 1051-2 - GLASS IN BUILDING - GLASS BLOCKS AND GLASS PAVER UNITS - PART 2: EVALUATION OF CONFORMITY |
| BS EN 61850-10:2013 | Communication networks and systems for power utility automation Conformance testing |
| I.S. EN 10025-1:2004 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| 09/30196441 DC : 0 | BS ISO 29990 - LEARNING SERVICES FOR NON-FORMAL EDUCATION AND TRAINING - BASIC REQUIREMENTS FOR SERVICE PROVIDERS |
| 11/30173018 DC : 0 | BS EN ISO 15189 - MEDICAL LABORATORIES - PARTICULAR REQUIREMENTS FOR QUALITY AND COMPETENCE |
| 12/30259884 DC : 0 | BS EN ISO 3452-2 - NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 2: TESTING OF PENETRANT MATERIALS |
| I.S. CEN ISO TR 14969:2005 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485: 2003 |
| 08/30159342 DC : DRAFT JUNE 2008 | BS EN 12668-2 - NON-DESTRUCTIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC EXAMINATION EQUIPMENT - PART 2: PROBES |
| PD ISO/IEC TR 29110-5-1-4:2018 | Software and systems engineering. Lifecycle profiles for very small entities (VSEs) Software engineering. Management and engineering guidelines. Generic profile group. Advanced profile |
| DIN EN ISO 12679:2015-12 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011) |
| BS ISO/IEC 90003:2014 | Software engineering. Guidelines for the application of ISO 9001:2008 to computer software |
| ISO/IEC 17021-3:2017 | Conformity assessment Requirements for bodies providing audit and certification of management systems Part 3: Competence requirements for auditing and certification of quality management systems |
| I.S. EN 10080:2005 | STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - GENERAL |
| 09/30184534 DC : DRAFT JAN 2009 | BS ISO/IEC 20000-1 - INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 1: SERVICE MANAGEMENT SYSTEM REQUIREMENTS |
| PREN 13108-21 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 21: FACTORY PRODUCTION CONTROL |
| 17/30360667 DC : DRAFT SEP 2017 | BS EN 1748-2-2 - GLASS IN BUILDING - SPECIAL BASIC PRODUCTS - GLASS CERAMICS - PART 2-2: PRODUCT STANDARD |
| DIN EN 16855-1:2015-06 (Draft) | WALK-IN COLD ROOMS - DEFINITION, THERMAL INSULATION PERFORMANCE AND TEST METHODS - PART 1: PREFABRICATED COLD ROOM KITS |
| ASTM F 2180 : 2017 : REDLINE | Standard Specification for Metallic Implantable Strands and Cables |
| 14/30292279 DC : 0 | BS EN 13230-1 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN ISO 11135-1:2007 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| PREN 14125 : DRAFT 2011 | THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS |
| 16/30244282 DC : 0 | BS EN 9115 - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE ORGANIZATIONS - DELIVERABLE SOFTWARE (SUPPLEMENT TO EN 9100) |
| 16/30334735 DC : 0 | BS EN 15224 - HEALTH CARE SERVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS BASED ON EN ISO 9001:2015 |
| ISO 10855-3:2018 | Offshore containers and associated lifting sets Part 3: Periodic inspection, examination and testing |
| BS ISO 17894:2005 | Ships and marine technology. Computer applications. General principles for the development and use of programmable electronic systems in marine applications |
| ASTM F 2071 : 2000 | Standard Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic |
| OIML D 16 : 2011 | PRINCIPLES OF ASSURANCE OF METROLOGICAL CONTROL |
| OIML D 10 : 2007 | GUIDELINES FOR THE DETERMINATION OF CALIBRATION INTERVALS OF MEASURING INSTRUMENTS |
| CEI EN 60746-2 : 2003 | EXPRESSION OF PERFORMANCE OF ELECTROCHEMICAL ANALYZERS - PART 2: PH VALUE |
| BS ISO 25119-2:2010 | Tractors and machinery for agriculture and forestry. Safety-related parts of control systems Concept phase |
| UNE-EN ISO 20857:2013 | Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) |
| BS ISO 10794:2011 | Space systems. Programme management. Material, mechanical parts and processes |
| I.S. EN ISO 20857:2013 | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 20857:2010) |
| 11/30230642 DC : 0 | BS ISO 18604 - PACKAGING AND THE ENVIRONMENT - MATERIAL RECYCLING |
| BS EN 14229:2010 | Structural timber. Wood poles for overhead lines |
| I.S. ISO 10013:1995 | GUIDELINES FOR DEVELOPING QUALITY MANUALS |
| BS EN 61207-7:2013 | Expression of performance of gas analyzers Tuneable semiconductor laser gas analyzers |
| BS EN 15234-1:2011 | Solid biofuels. Fuel quality assurance General requirements |
| BS EN 61189-5:2006 | Test methods for electrical materials, interconnection structures and assemblies Test methods for printed board assemblies |
| 10/30231844 DC : DRAFT SEP 2010 | BS EN 13225 - PRECAST CONCRETE PRODUCTS - LINEAR STRUCTURAL ELEMENTS |
| I.S. EN 61400-1:2005 | WIND TURBINES - PART 1: DESIGN REQUIREMENTS |
| UNE-CEN/TS 1453-2:2017 | Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity |
| PD IEC/TS 62607-4-4:2016 | Nanomanufacturing. Key control characteristics Nano-enabled electrical energy storage. Thermal characterization of nanomaterials, nail penetration method |
| ISO 9000-1:1994 | Quality management and quality assurance standards — Part 1: Guidelines for selection and use |
| BS EN 4499:2009 | Aerospace series. Screws, 100° countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating. Classification: 1100 MPa (at ambient temperature) / 315 °C |
| ECA ILAC P15 : 2016 | APPLICATION OF ISO/IEC 17020:2012 FOR THE ACCREDITATION OF INSPECTION BODIES |
| ISO 16192:2017 | Space systems — Experience gained in space projects (lessons learned) — Principles and guidelines |
| CEI UNI EN 45510-6-8 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-8: TURBINE AUXILIARIES - CRANES |
| 08/30193356 DC : DRAFT DEC 2008 | BS ISO 8724 - CORK DECORATIVE PANELS - SPECIFICATION |
| BIP 0071 : 2014 | GUIDELINES ON REQUIREMENTS AND PREPARATION FOR ISMS CERTIFICATION BASED ON ISO/IEC 27001 |
| CEN/TS 15399:2007 | Gas Supply Systems - Guidelines for Management systems for Gas Distribution Network |
| BS EN 61189-5-2:2015 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies General test methods for materials and assemblies. Soldering flux for printed board assemblies |
| 12/30265316 DC : 0 | BS EN 124-2 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 2: GULLY TOPS AND MANHOLE TOPS MADE FROM CAST IRON |
| 14/30314738 DC : 0 | BS EN 12004-1 - ADHESIVES FOR TILES - PART 1: REQUIREMENTS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
| 04/30125238 DC : DRAFT NOV 2004 | EN 15085-3 - RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 3: DESIGN REQUIREMENTS |
| 09/30180393 DC : 0 | BS EN ISO 10451 - DENTISTRY - CONTENTS OF TECHNICAL FILE FOR DENTAL IMPLANT SYSTEMS |
| PD ISO/IEC TR 29110-5-1-3:2017 | Systems and software engineering. Lifecycle profiles for Very Small Entities (VSEs) Software engineering. Management and engineering guide: Generic profile group. Intermediate profile |
| I.S. EN 62402:2007 | OBSOLESCENCE MANAGEMENT - APPLICATION GUIDE |
| UNE-EN ISO/IEC 17021-1:2015 | Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 1: Requirements (ISO/IEC 17021-1:2015) |
| UNI CEN/TS 14541 : 2013 | PLASTICS PIPES AND FITTINGS - CHARACTERISTICS FOR UTILISATION OF NON-VIRGIN PVC-U, PP AND PE MATERIALS |
| 10/30175579 DC : 0 | BS EN 62566 - NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - SELECTION AND USE OF COMPLEX ELECTRONIC COMPONENTS FOR SYSTEMS PERFORMING CATEGORY A FUNCTIONS |
| 13/30278952 DC : 0 | BS EN 16372 - AESTHETIC SURGERY AND AESTHETIC NON-SURGICAL MEDICAL SERVICES |
| 16/30321970 DC : 0 | BS EN ISO 20519 - SHIPS AND MARINE TECHNOLOGY - SPECIFICATION FOR BUNKERING OF GAS FUELLED SHIPS |
| 05/30134192 DC : DRAFT MAY 2005 | EN 516 - PREFABRICATED ACCESSORIES FOR ROOFING - INSTALLATIONS FOR ROOF ACCESS - WALKWAYS, TREADS AND STEPS |
| 08/30183125 DC : 0 | BS EN 1857 - CHIMNEYS - COMPONENTS - CONCRETE FLUE LINERS |
| BS EN ISO 6789-2:2017 | Assembly tools for screws and nuts. Hand torque tools Requirements for calibration and determination of measurement uncertainty |
| BS ISO 17712:2013 | Freight containers. Mechanical seals |
| 13/30286291 DC : 0 | BS EN 9320 - AEROSPACE SERIES - PROGRAMME MANAGEMENT - GENERAL RECOMMENDATION FOR ACQUISITION AND SUPPLY OF OPEN SYSTEMS |
| 13/30286135 DC : 0 | BS EN 13616-1 - OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - REQUIREMENTS AND TEST/ASSESSMENT METHODS - PART 1: OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE |
| EN 50556:2011 | Road traffic signal systems |
| 10/30211862 DC : 0 | BS EN 998-1 - SPECIFICATION FOR MORTAR FOR MASONRY - PART 1: RENDERING AND PLASTERING MORTAR |
| BS IEC 60987:2007 | Nuclear power plants. Instrumentation and control important to safety. Hardware design requirements for computer-based systems |
| BS EN 61284:1998 | Overhead lines. Requirements and tests for fittings |
| 14/30311451 DC : 0 | BS EN 13407 - WALL-HUNG URINALS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 9103:2014 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - VARIATION MANAGEMENT OF KEY CHARACTERISTICS |
| PD IEC/TR 63084:2017 | Nuclear power plants. Instrumentation and control important to safety. Platform qualification for systems important to safety |
| PD CEN/TS 12200-2:2017 | Plastics rainwater piping systems for above ground external use. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
| DIN EN ISO 15743:2008-11 | ERGONOMICS OF THE THERMAL ENVIRONMENT - COLD WORKPLACES - RISK ASSESSMENT AND MANAGEMENT |
| BS EN 14587-2:2009 | Railway applications. Track. Flash butt welding of rails New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a fixed plant |
| IEC PAS 62239:2001 | Electronic component management plans |
| 14/30311457 DC : 0 | BS EN 13310 - KITCHEN SINKS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| BS ISO/IEC 33063:2015 | Information technology. Process assessment. Process assessment model for software testing |
| I.S. EN 60746-2:2003 | EXPRESSION OF PERFORMANCE OF ELECTROCHEMICAL ANALYZERS - PART 2: PH VALUE |
| ISO/TS 21432:2005 | Non-destructive testing Standard test method for determining residual stresses by neutron diffraction |
| 09/30203307 DC : DRAFT JULY 2009 | BS EN 14636-2 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE DRAINAGE AND SEWERAGE - POLYESTER RESIN CONCRETE (PRC) - PART 2: MANHOLES AND INSPECTION CHAMBERS |
| SAE ARP 9009 : 2017 | AEROSPACE CONTRACT CLAUSES |
| 14/30297518 DC : 0 | BS EN 16704-3 - RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 3: COMPETENCES OF PERSONNEL RELATED TO WORK ON OR NEAR TRACKS |
| UNE-EN 1591-4:2014 | Flanges and their joints - Part 4: Qualification of personnel competency in the assembly of the bolted connections of critical service pressurized systems |
| I.S. EN 14969:2006 | RAILWAY APPLICATIONS - TRACK - QUALIFICATION SYSTEM FOR RAILWAY TRACKWORK CONTRACTORS |
| I.S. EN 50598-3:2015 | ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - PART 3: QUANTITATIVE ECO DESIGN APPROACH THROUGH LIFE CYCLE ASSESSMENT INCLUDING PRODUCT CATEGORY RULES AND THE CONTENT OF ENVIRONMENTAL DECLARATIONS |
| ISO 24510:2007 | Activities relating to drinking water and wastewater services — Guidelines for the assessment and for the improvement of the service to users |
| 05/30134004 DC : DRAFT MAY 2005 | EN ISO 7218 - MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - GENERAL REQUIREMENTS AND GUIDANCE FOR MICROBIOLOGICAL EXAMINATIONS |
| I.S. EN 4135:2009 | AEROSPACE SERIES - BOLTS, NORMAL BI-HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| UNE-ISO 26000:2012 | Guidance on social responsibility |
| BS ISO/IEC 15504-4:2004 | Information technology. Process assessment Guidance on use for process improvement and process capability determination |
| I.S. EN 1400:2013 | CHILD USE AND CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 4499:2009 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK REDUCED HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, WITH ALUMINIUM PIGMENTED COATING - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| BS EN 61189-6:2006 | Test methods for electrical materials, interconnection structures and assemblies Test methods for materials used in manufacturing electronic assemblies |
| 13/30217369 DC : 0 | BS EN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| PREN 13230-1 : DRAFT 2014 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 1: GENERAL REQUIREMENTS |
| CEI UNI ISO/IEC TR 20000-3 : 2011 | INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 3: GUIDANCE ON SCOPE DEFINITION AND APPLICABILITY OF ISO/IEC 20000-1 |
| 08/30156645 DC : DRAFT JULY 2008 | BS ISO 25119-2 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE |
| PREN 13674-4 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| 10/30238393 DC : 0 | BS ISO 10004 - QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR MONITORING AND MEASURING |
| BS EN 14636-1:2009 | Plastics piping systems for non-pressure drainage and sewerage. Polyester resin concrete (PRC) Pipes and fittings with flexible joints |
| DIN EN 16887 E : 2017 | LEATHER - ENVIRONMENTAL FOOTPRINT - PRODUCT CATEGORY RULES (PCR) - CARBON FOOTPRINTS |
| BS EN 4135:2009 | Aerospace series. Bolts, normal bi-hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315°C |
| PREN 45001 : DRAFT 1997 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| 14/30301263 DC : 0 | BS EN 13160-5 - LEAK DETECTION SYSTEMS - PART 5: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR IN-TANK GAUGE SYSTEMS AND PRESSURISED PIPEWORK SYSTEMS |
| ONORM EN 1065 : 2013 | ADJUSTABLE TELESCOPIC STEEL PROPS - PRODUCT SPECIFICATIONS, DESIGN AND ASSESSMENT BY CALCULATION AND TESTS |
| PREN 14636-2 : DRAFT 2009 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE DRAINAGE AND SEWERAGE - POLYESTER RESIN CONCRETE (PRC) - PART 2: MANHOLES AND INSPECTION CHAMBERS |
| UNI CEN/TR 15276-1 : 2009 | FIXED FIREFIGHTING SYSTEMS - CONDENSED AEROSOL EXTINGUISHING SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| UNI EN 10253-3 : 2009 | BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS |
| CEI UNI EN 45510-4-2 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4: BOILER AUXILIARIES - SECTION 2: GAS-AIR, STEAM-AIR AND GAS-GAS HEATERS |
| UNI ISO 2919 : 2012 | RADIOLOGICAL PROTECTION - SEALED RADIOACTIVE SOURCES - GENERAL REQUIREMENTS AND CLASSIFICATION |
| CEI EN 61513 : 2013 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - GENERAL REQUIREMENT FOR SYSTEMS |
| PREN 13565-1 : DRAFT 2016 | FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| CEI UNI EN ISO/IEC 17024 : 2012 | CONFORMITY ASSESSMENT GENERAL REQUIREMENTS FOR BODIES OPERATING CERTIFICATION OF PERSONS |
| CEI EN 60966-1 : 2001 | RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 1: GENERIC SPECIFICATION GENERAL REQUIREMENTS AND TEST METHODS |
| ISO 28002:2011 | Security management systems for the supply chain — Development of resilience in the supply chain — Requirements with guidance for use |
| UNI EN 10343 : 2009 | STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS |
| PREN 50290-2-20 : DRAFT 2016 | COMMUNICATION CABLES - PART 2-20: COMMON DESIGN RULES AND CONSTRUCTION - GENERAL |
| PREN 13204 : DRAFT 2015 | DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
| UNI CEN/TS 1555-7 : 2013 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| DIN EN 16853:2015-05 (Draft) | CONSERVATION OF CULTURAL HERITAGE - CONSERVATION PROCESS - DECISION MAKING, PLANNING AND IMPLEMENTATION |
| UNI EN 15821 : 2010 | MULTI-FIRING SAUNA STOVES FIRED BY NATURAL WOOD LOGS - REQUIREMENTS AND TEST METHODS |
| UNI EN 1254-6 : 2012 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 6: FITTINGS WITH PUSH-FIT ENDS |
| BS ISO 16038:2017 | Male condoms. Guidance on the use of ISO 4074 and ISO 23409 in the quality management of condoms |
| DIN EN 14188-4:2009-10 | Joint fillers and sealants - Part 4: Specifications for primers to be used with joint sealants |
| DIN EN 12273:2008-08 | Slurry surfacing - Requirements |
| ISO/TR 28380-3:2014 | Health informatics IHE global standards adoption Part 3: Deployment |
| BS EN 4133:2009 | Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambient temperature) / 425 °C |
| BS ISO 28003:2007 | Security management systems for the supply chain. Requirements for bodies providing audit and certification of supply chain security management systems |
| EN 1254-5:1998 | Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes |
| DIN EN 15348:2015-01 | Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates |
| BS EN 1474-1:2008 | Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems Design and testing of transfer arms |
| BS 5750-0.1(1987) : 1987 | QUALITY SYSTEMS - PRINCIPAL CONCEPTS AND APPLICATIONS - GUIDE TO SELECTION AND USE |
| DD CEN/TS 12666-2:2005 | Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE) Guidance for the assessment of conformity |
| XP PREN 9000-2 : 1999 XP | AEROSPACE SERIES - AEROSPACE INDUSTRY QUALITY SYSTEM - PART 2: REQUIREMENTS APPLICABLE TO MAINTENANCE ORGANIZATIONS |
| UNE-CEN/TR 15983:2011 IN | Stationary source emissions - Guidance on the application of EN 14181:2004 |
| UNE-EN 12566-6:2017 | Small wastewater treatment systems for up to 50 PT - Part 6: Prefabricated treatment units for septic tank effluent |
| UNE-EN 12004-1:2017 | Adhesives for ceramic tiles - Part 1: Requirements, assessment and verification of constancy of performance, classification and marking |
| UNE-EN ISO 12679:2016 | Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011) |
| BS EN ISO 15378:2017 | Primary packaging materials for medicinal products. Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) |
| DIN EN 12101-8:2011-08 | Smoke and heat control systems - Part 8: Smoke control dampers |
| BS ISO 10904:2011 | Fibre-cement corrugated sheets and fittings for roofing and cladding |
| CEI EN 50103 : 1996 | GUIDANCE ON THE APPLICATION OF EN 29001 AND EN 46001 AND OF EN 29002 AND EN 46002 FOR THE ACTIVE (INCLUDING ACTIVE IMPLANTABLE) MEDICAL DEVICE INDUSTRY |
| CEN/TR 15276-1:2009 | Fixed firefighting systems - Condensed aerosol extinguishing systems - Part 1: Requirements and test methods for components |
| EN 1254-8:2012 | Copper and copper alloys - Plumbing fittings - Part 8: Fittings with press ends for use with plastics and multilayer pipes |
| UNE-ISO 28003:2014 | Security management systems for the supply chain. Requirements for bodies providing audit and certification of supply chain security management systems |
| ISO 8000-61:2016 | Data quality — Part 61: Data quality management: Process reference model |
| BS ISO 10005:2005 | Quality management systems. Guidelines for quality plans |
| BS ISO 21927-8:2017 | Smoke and heat control systems Smoke control dampers |
| BS EN 61190-1-1:2002 | Attachment materials for electronic assembly Requirements for soldering fluxes for high-quality interconnections in electronics assembly |
| 16/30334287 DC : 0 | BS EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURE UP TO 100 BAR |
| 12/30243066 DC : 0 | BS EN 14411 - CERAMIC TILES - DEFINITIONS, CLASSIFICATION, CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| 07/30149385 DC : 0 | BS ISO 22241-3 - DIESEL ENGINES - NO[X] REDUCTION AGENT AUS 32 - PART 3: HANDLING, TRANSPORTATION, STORAGE |
| PD IEC/TS 62257-9-5:2016 | Recommendations for renewable energy and hybrid systems for rural electrification Integrated systems. Selection of stand-alone lighting kits for rural electrification |
| 12/30265295 DC : 0 | BS EN 12050-3 - WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PRINCIPLES OF CONSTRUCTION AND TESTING - PART 3: LIFTING PLANTS FOR LIMITED APPLICATIONS |
| DIN EN 10210-1:2016-01 (Draft) | Hot finished structural steel hollow sections - Part 1: General; German and English version prEN 10210-1:2016 |
| DIN EN 14592:2012-07 | Timber structures - Dowel-type fasteners - Requirements (includes Amendment A1:2012) |
| DIN EN 15286:2013-09 | Agglomerated stone - Slabs and tiles for wall finishes (internal and external) |
| UNE-EN 15331:2012 | Criteria for design, management and control of maintenance services for buildings |
| BS EN 15331:2011 | Criteria for design, management and control of maintenance services for buildings |
| DIN EN 13674-4:2016-05 (Draft) | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| 17/30357433 DC | BS EN 13279-1. Gypsum binders and gypsum plasters. Part 1. Definitions and requirements |
| BS EN 15348:2014 | Plastics. Recycled plastics. Characterization of poly(ethylene terephthalate) (PET) recyclates |
| UNI CEN ISO/TS 21003-7 : 2010 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| 04/30122777 DC : DRAFT SEP 2004 | ISO 6966-2 - AIRCRAFT GROUND EQUIPMENT - BASIC REQUIREMENTS - PART 2: SAFETY REQUIREMENTS |
| 11/30238644 DC : 0 | BS EN 490 - CONCRETE ROOFING TILES AND FITTINGS FOR ROOF COVERING AND WALL CLADDING - PRODUCT SPECIFICATIONS |
| I.S. EN 15267-1:2009 | AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 1: GENERAL PRINCIPLES |
| BS IEC 60748-23-1:2002 | Semiconductor devices. Integrated circuits. Hybrid integrated circuits and film structures. Manufacturing line certification Generic specification |
| 15/30328796 DC : 0 | BS EN 13253 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN EROSION CONTROL WORKS (COASTAL PROTECTION, BANK REVETMENTS) |
| CEI UNI EN 45510-6-6 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-6: TURBINE AUXILIARIES - WET AND WET/DRY COOLING TOWERS |
| CEI UNI EN 45510-4-4 : 2006 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-4: BOILER AUXILIARIES - FUEL PREPARATION EQUIPMENT |
| BS ISO 19258 : 2005 | SOIL QUALITY - GUIDANCE ON THE DETERMINATION OF BACKGROUND VALUES |
| BS EN 60076-1:2011 | Power transformers General |
| BS ISO 14300-2:2011 | Space systems. Programme management Product assurance |
| DIN EN 15814:2015-03 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS |
| 14/30289934 DC : 0 | BS ISO 18385 - MINIMIZING THE RISK OF DNA CONTAMINATION IN PRODUCTS USED TO COLLECT AND ANALYSE BIOLOGICAL MATERIAL FOR FORENSIC PURPOSES |
| 07/30164697 DC : 0 | ISO 20857 - STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF AN INDUSTRIAL STERILIZATION PROCESS FOR MEDICAL DEVICES |
| BS EN 54-24:2008 | Fire detection and fire alarm systems Components of voice alarm systems. Loudspeakers |
| BS EN ISO/IEC 17021-1:2015 | Conformity assessment. Requirements for bodies providing audit and certification of management systems Requirements |
| 06/30138405 DC : DRAFT JUN 2006 | ISO 8539 - FORGED STEEL COMPONENTS FOR LIFTING SLINGS - GRADE 8 |
| PREN 15274 : DRAFT 2014 | GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 3452-6:2008 | Non-destructive testing. Penetrant testing Penetrant testing at temperatures lower than 10 °C |
| DIN EN 10253-3:2009-02 | BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS |
| PREN 1790 : DRAFT 2012 | ROAD MARKING MATERIALS - PREFORMED ROAD MARKINGS |
| 95/704659 DC : DRAFT MAR 1995 | PREN 1872 - MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR MINING VENTILATION MACHINERY - ELECTRICALLY DRIVEN FANS FOR UNDERGROUND USE |
| PREN 14592 : DRAFT 2017 | TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
| OHSAS 18002:2000 | OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - GUIDELINES FOR THE IMPLEMENTATION OF OHSAS 18001:2007 |
| PREN 14496 : DRAFT 2016 | GYPSUM BASED ADHESIVES FOR THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS AND GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 3712:2007 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, ONE LUG, FIXED, REDUCED SERIES, WITH COUNTERBORE, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| 13/30278732 DC : 0 | BS EN 13108-21 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 21: FACTORY PRODUCTION CONTROL |
| 08/30187190 DC : 0 | BS EN 13888 - GROUT FOR TILES - REQUIREMENTS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
| 13/30278077 DC : 0 | BS EN ISO 16904 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND TESTING OF LNG MARINE TRANSFER ARMS FOR CONVENTIONAL ONSHORE TERMINALS |
| 14/30274238 DC : 0 | BS EN 14359 - GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
| 13/30279826 DC : 0 | BS EN 15551 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| CAN/CSA-ISO/IEC 33063:16 | Information technology Process assessment Process assessment model for software testing (Adopted ISO/IEC 33063:2015, first edition, 2015-08-15) |
| 16/30337386 DC : 0 | BS ISO 16192 - SPACE SYSTEMS - EXPERIENCE GAINED IN SPACE PROJECTS (LESSONS LEARNED) - PRINCIPLES AND GUIDELINES |
| PREN 13493 : DRAFT 2016 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
| BIP 2072 : 2005 | QUALITY OF CARE IN RESIDENTIAL HOMES FOR THE ELDERLY |
| PD CEN/TS 1519-2:2012 | Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylen (PE) Guidance for the assessment of conformity |
| 04/30117724 DC : DRAFT AUG 2004 | EN 14023 - BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK SPECIFICATION FOR POLYMER MODIFIED BITUMENS |
| 13/30280051 DC : 0 | BS EN 16590-3 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 3: SERIES DEVELOPMENT, HARDWARE AND SOFTWARE |
| BS ISO 21368:2005 | Adhesives. Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures |
| 16/30342991 DC : 0 | BS EN ISO 13918 - WELDING - STUDS AND CERAMIC FERRULES FOR ARC STUD WELDING |
| 14/30311463 DC : 0 | BS EN 14688 - SANITARY APPLIANCES - WASH BASINS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| 03/314215 DC : DRAFT OCT 2003 | ISO TR 14969 - MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
| BS EN 15655:2009 | Ductile iron pipes, fittings and accessories. Internal polyurethane lining for pipes and fittings. Requirements and test methods |
| DD ISO/TS 22559-3:2011 | Safety requirements for lifts (elevators) Global conformity assessment procedures (GCAP). Prerequisites for certification of conformity of lift systems, lift components and lift functions |
| PREN 14904 : DRAFT 2015 | SURFACES FOR SPORTS AREAS - INDOOR SURFACES FOR MULTI-SPORTS USE - SPECIFICATION |
| 08/30180551 DC : DRAFT APR 2008 | BS OHSAS 18002 - OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - GUIDELINES FOR THE IMPLEMENTATION OF OHSAS 18001:2007 |
| BS EN 45510-3-1:2000 | Guide for the procurement of power station equipment. Boilers Water tube boilers - Section 1: Water tube boilers |
| PREN 14566 : DRAFT 2014 | MECHANICAL FASTENERS FOR GYPSUM BOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TESTS METHODS |
| EN 62619:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications |
| UNE-EN 13369:2013 | Common rules for precast concrete products |
| DIN EN 10088-5:2009-07 | STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| 18/30334473 DC : 0 | BS ISO 11336-3 - LARGE YACHTS - STRENGTH, WEATHERTIGHTNESS AND WATERTIGHTNESS OF GLAZED OPENINGS - PART 3: QUALITY ASSURANCE, INSTALLATION AND IN-SERVICE INSPECTION |
| PREN 13492 : DRAFT 2016 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT |
| ISO 10006:2017 | Quality management — Guidelines for quality management in projects |
| PREN 13888 : DRAFT 2008 | GROUT FOR TILES - REQUIREMENTS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
| BS EN 1457-2:2012 | Chimneys. Clay/ceramic flue liners Flue liners operating under wet conditions. Requirements and test methods |
| DD CLC/TS 50502:2008 | Railway applications. Rolling stock. Electric equipment in trolley buses. Safety requirements and connection systems |
| 13/30287034 DC : 0 | BS EN 3660-001 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION |
| 14/30301260 DC : 0 | BS EN 13160-2 - LEAK DETECTION SYSTEMS - PART 2: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR PRESSURE AND VACUUM SYSTEMS |
| I.S. EN 3389:2009 | AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY) - CLASSIFICATION: 1210 MPA/730 DEGREE C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
| BS EN 15964:2011 | Breath alcohol test devices other than single use devices. Requirements and test methods |
| DD CEN/TS 15358:2006 | Solid recovered fuels. Quality management systems. Particular requirements for their application to the production of solid recovered fuels |
| BS EN 45510-7-1:2000 | Guide for the procurement of power station equipment. Pipework and valves High pressure piping systems - Section 1: High pressure piping systems |
| UNI EN ISO 3452-6 : 2009 | NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 6: PENETRANT TESTING AT TEMPERATURES LOWER THAN 10 DEGREES C |
| 14/30289280 DC : 0 | BS EN 12764 - SANITARY APPLIANCES - SPECIFICATION FOR WHIRLPOOL BATHS |
| 07/30172345 DC : 0 | BS EN 15724 - THERMOPLASTICS STATIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - SECONDARY CONTAINMENTS USED WITH TANKS COMPLYING WITH EN 13341 - REQUIREMENTS AND TEST METHODS |
| DEFSTAN 05-91/1(1991) : 1991 | QUALITY SYSTEM REQUIREMENTS FOR DESIGN/DEVELOPMENT, PRODUCTION, INSTALLATION AND SERVICING |
| UNI CEI CEN/TS 45545-2 : 2009 | RAILWAY APPLICATIONS - FIRE PROTECTION OF RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| UNI EN 2043 : 2014 | AEROSPACE SERIES - METALLIC MATERIALS - GENERAL REQUIREMENTS FOR SEMI-FINISHED PRODUCT QUALIFICATION (EXCLUDING FORGINGS AND CASTINGS) |
| 12/30259025 DC : 0 | BS EN 50575 - POWER, CONTROL AND COMMUNICATION CABLES - CABLES FOR GENERAL APPLICATIONS IN CONSTRUCTION WORKS SUBJECT TO REACTION TO FIRE REQUIREMENTS |
| 05/30126202 DC : 0 | EN 10088-4 - STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| 04/30050376 DC : DRAFT AUG 2004 | EN 13981-4 - ALUMINIUM AND ALUMINIUM ALLOYS - PRODUCTS FOR STRUCTURAL RAILWAY APPLICATIONS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY - PART 4: FORGINGS |
| SWIFT 2:2009 | EMBEDDING EFFECTIVE MANAGEMENT SYSTEMS IN PUBLIC SECTOR ORGANIZATIONS - GUIDANCE FOR THE IMPLEMENTATION OF ISO 9001:2008 |
| 07/30164234 DC : 0 | BS EN 14055 - WC AND URINAL FLUSHING CISTERNS |
| DD CEN ISO/TS 15874-7:2003 | Plastics piping systems for hot and cold water installations. Polypropylene (PP) Guidance for the assessment of conformity |
| 10/30229550 DC : 0 | BS EN 12451 REV - COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS |
| IEEE 15939-2008 | IEEE Standard Adoption of ISO/IEC 15939:2007--Systems and Software Engineering--Measurement Process |
| DD CEN ISO/TS 15875-7:2003 | Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X) Guidance for the assessment of conformity |
| I.S. EN ISO 17663:2009 | WELDING - QUALITY REQUIREMENTS FOR HEAT TREATMENT IN CONNECTION WITH WELDING AND ALLIED PROCESSES |
| 15/30330406 DC : 0 | BS EN 50126-2 - RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY,AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 2: SYSTEMS APPROACH TO SAFETY |
| 17/30329617 DC : 0 | BS ISO/IEC 29110-4-3 - SYSTEMS AND SOFTWARE ENGINEERING - LIFECYCLE PROFILES FOR VERY SMALL ENTITIES (VSES) - PART 4-3: SERVICE DELIVERY - PROFILE SPECIFICATION |
| 14/30304113 DC : 0 | BS EN 16497-2 - CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 2: BALANCED FLUE APPLICATIONS |
| BS EN ISO 17989-1:2015 | Tractors and machinery for agriculture and forestry. Sustainability Principles |
| BS ISO 13053-1:2011 | Quantitative methods in process improvement. Six Sigma DMAIC methodology |
| 03/109279 DC : DRAFT AUG 2003 | BS EN ISO 14001 - ENVIRONMENTAL MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| 17/30355324 DC : 0 | PD IEC/TS 63049 ED 1.0 - TERRESTRIAL PHOTOVOLTAIC (PV) SYSTEMS - GUIDELINE FOR INCREASED CONFIDENCE IN PV SYSTEM INSTALLATION |
| ASTM F 2384 : 2010 : R2016 | Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901) |
| 14/30299515 DC : 0 | BS EN 16747 - MARITIME AND PORT SECURITY SERVICES |
| CEI UNI EN 45510-5-1 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-1: STEAM TURBINES |
| 08/30184312 DC : DRAFT SEP 2008 | BS EN 12952-6 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 6: INSPECTION DURING CONSTRUCTION; DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER |
| BS CECC 299001:1999 | Technology approval schedule. Manufacture of electrical connectors |
| BIP 3093 : 2013 | THE RISK MANAGEMENT STANDARDS AND GUIDANCE COLLECTION |
| UNE-EN 50502:2016 | Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection systems |
| 10/30234634 DC : 0 | BS EN 14423 - CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR |
| 11/30238022 DC : DRAFT MAR 2011 | BS EN 12815 - RESIDENTIAL COOKERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| BS ISO 50007:2017 | Energy services. Guidelines for the assessment and improvement of the energy service to users |
| 15/30331856 DC : 0 | BS EN ISO 10855-1 - OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 1: OFFSHORE CONTAINER - DESIGN, MANUFACTURE AND MARKING |
| DIN ISO 28000:2015-08 | Specification for security management systems for the supply chain (ISO 28000:2007) |
| ISO 20313:2018 | Ships and marine technology — Cathodic protection of ships |
| 11/30246672 DC : 0 | BS EN 15286 - AGGLOMERATED STONE - SLABS AND TILES FOR WALL FINISHES (INTERNAL AND EXTERNAL) |
| BS ISO/IEC 16350:2015 | Information technology. Systems and software engineering. Application management |
| NF EN 9133 : 2005 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - QUALIFICATION PROCEDURE FOR AEROSPACE STANDARD PARTS |
| BS EN 54-27:2015 | Fire detection and fire alarms systems Duct smoke detectors |
| 07/30145258 DC : 0 | BS ISO 20072 - AEROSOL DRUG DELIVERY DEVICES DESIGN VERIFICATION - REQUIREMENTS AND TEST METHODS |
| TR NWT 000179 : ISSUE 2 | QUALITY SYSTEM GENERIC REQUIREMENTS FOR SOFTWARE |
| DIN EN 12966:2015-03 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS |
| DIN EN 206:2014-07 | CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| 04/30126455 DC : DRAFT DEC 2004 | EN ISO/IEC 15423 - INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE SCANNER AND DECODER PERFORMANCE TESTING |
| BIS IS/ISO 19011 : 2011(R2016) | GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS |
| BS ISO 16412:2005 | Air cargo equipment. Air cargo pallets. Utilization guidelines |
| I.S. EN 1254-2:1998 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 2: FITTINGS WITH COMPRESSION ENDS FOR USE WITH COPPER TUBES |
| CSA ISO/IEC 21827 : 2009 : R2014 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - SYSTEMS SECURITY ENGINEERING - CAPABILITY MATURITY MODEL (SSE-CMM) |
| BS EN 14967:2006 | Flexible sheets for waterproofing. Bitumen damp proof courses. Definitions and characteristics |
| CSA ISO 10006 : 2003 : R2013 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY MANAGEMENT IN PROJECTS |
| CSA ISO 9004 : 2009 | MANAGING FOR THE SUSTAINED SUCCESS OF AN ORGANIZATION - A QUALITY MANAGEMENT APPROACH |
| AAMI ISO 11140-3 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 3: CLASS 2 INDICATOR SYSTEMS FOR USE IN THE BOWIE AND DICK-TYPE STEAM PENETRATION TEST |
| CSA ISO 10003 : 2008 : R2017 | QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR DISPUTE RESOLUTION EXTERNAL TO ORGANIZATIONS |
| 07/30152878 DC : DRAFT AUG 2007 | BS EN 14250 - TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED STRUCTURAL MEMBERS ASSEMBLED WITH PUNCHED METAL PLATE FASTENERS |
| 07/30165568 DC : 0 | BS EN 448 - DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| ASTM D 7520 : 2016 : REDLINE | Standard Test Method for Determining the Opacity of a Plume in the Outdoor Ambient Atmosphere |
| ASTM D 5330/D5330M : 2006 : R2012 : EDT 1 | Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced |
| 02/400378 DC : DRAFT APR 2002 | ISO/DIS 10006 - QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY MANAGEMENT IN PROJECTS |
| CSA ISO TR 14969 : 2005 : R2015 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
| BS EN 4131:2009 | Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in heat resisting nickel base alloy, aluminium IVD coated. Classification: 1250 MPa (at ambient temperature) / 425 °C |
| CSA N292.5 : 2011 : INC : UPD 1 : 2017 : R201600 | GUIDELINE FOR THE EXEMPTION OR CLEARANCE FROM REGULATORY CONTROL OF MATERIALS THAT CONTAIN, OR POTENTIALLY CONTAIN, NUCLEAR SUBSTANCES |
| ASTM F 3046 : 2013 | Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy for Surgical Implant Applications (UNS R56320) |
| 08/30143668 DC : DRAFT DEC 2008 | BS EN ISO 14005 - ENVIRONMENTAL MANAGEMENT SYSTEMS - GUIDELINES FOR THE PHASED IMPLEMENTATION OF AN ENVIRONMENTAL MANAGEMENT SYSTEM, INCLUDING THE USE OF ENVIRONMENTAL PERFORMANCE EVALUATION |
| UNI EN 12101-8 : 2011 | SMOKE AND HEAT CONTROL SYSTEMS - PART 8: SMOKE CONTROL DAMPERS |
| UNI EN 15650 : 2010 | VENTILATION FOR BUILDINGS - FIRE DAMPERS |
| UNI EN 15389 : 2008 | INDUSTRIAL VALVES - PERFORMANCE CHARACTERISTICS OF THERMOPLASTIC VALVES WHEN USED AS CONSTRUCTION PRODUCTS |
| I.S. EN 15593:2008 | PACKAGING - MANAGEMENT OF HYGIENE IN THE PRODUCTION OF PACKAGING FOR FOODSTUFFS - REQUIREMENTS |
| S.R. CEN TR 15983:2010 | STATIONARY SOURCE EMISSIONS - GUIDANCE ON THE APPLICATION OF EN 14181:2004 |
| CSA ISO/IEC 15423 : 2010 : R2015 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE SCANNER AND DECODER PERFORMANCE TESTING |
| 04/30125235 DC : DRAFT NOV 2004 | EN 15085-2 - RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 2: QUALITY REQUIREMENTS AND CERTIFICATION OF WELDING MANUFACTURER |
| PD ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| PREN 9135 : DRAFT 2003 | AEROSPACE SERIES - QUALITY SYSTEMS - SPECIFIC QUALITY REQUIREMENTS FOR NATO SUPPLIERS |
| 16/30326000 DC : 0 | BS ISO/IEC 19770-1 - INFORMATION TECHNOLOGY - IT ASSET MANAGEMENT - PART 1: IT ASSET MANAGEMENT SYSTEMS - REQUIREMENTS |
| ASTM F 2071 : 2000 : R2011 | Standard Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic |
| 09/30178203 DC : 0 | BS EN 61193-3, ED.1 - QUALITY ASSESSMENT SYSTEMS - PART 3: SELECTION AND USE OF SAMPLING PLANS FOR PRINTED BOARD AND LAMINATE END-PRODUCT AND IN-PROCESS AUDITING |
| BS EN 15542:2008 | Ductile iron pipes, fittings and accessories. External cement mortar coating for pipes. Requirements and test methods |
| 16/30312185 DC : 0 | BS EN ISO/IEC 17011 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR ACCREDITATION BODIES ACCREDITING CONFORMITY ASSESSMENT BODIES |
| UNE-EN 15964:2012 | Breath alcohol test devices other than single use devices - Requirements and test methods |
| UNE-EN ISO/IEC 17065:2012 | Conformity assessment - Requirements for bodies certifying products, processes and services (ISO/IEC 17065:2012) |
| PREN 9000-3 : 200P2 | AEROSPACE SERIES - AEROSPACE INDUSTRY QUALITY SYSTEM - PART 3: REQUIREMENTS APPLICABLE TO STOCKISTS-DISTRIBUTORS |
| UNI EN 13674-2 : 2010 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| XP PREN 9130 : 2001 XP | AEROSPACE SERIES - QUALITY SYSTEMS - RECORD RETENTION |
| ISO 15161:2001 | Guidelines on the application of ISO 9001:2000 for the food and drink industry |
| S.R. CEN/TR 16626:2014 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - GUIDANCE FOR VOLUNTARY THIRD-PARTY CERTIFICATION PROCEDURES |
| UNI CEI CEN/TS 45545-1 : 2009 | RAILWAY APPLICATIONS - FIRE PROTECTION OF RAILWAY VEHICLES - PART 1: GENERAL |
| 08/30162181 DC : DRAFT APR 2008 | BS EN 54-26 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 26: POINT FIRE DETECTORS USING CARBON MONOXIDE SENSORS |
| CSA ISO/IEC 15423 : 2010 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE SCANNER AND DECODER PERFORMANCE TESTING |
| UNE-EN 50290-2-20:2017 | Communication cables - Part 2-20: Common design rules and construction - General |
| 07/30156249 DC : 0 | BS EN 12446 - CHIMNEYS - COMPONENTS - CONCRETE OUTER WALL ELEMENTS |
| PREN 50502 : DRAFT 2013 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS |
| AAMI ISO 13408-6:2005 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 6: ISOLATOR SYSTEMS |
| ISO/TR 14969:2004 | Medical devices Quality management systems Guidance on the application of ISO 13485: 2003 |
| DD ENV 1565-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene copolymer blends (SAN + PVC) Guidance for the assessment of conformity |
| CSA ISO/IEC 20000-2:2013 | INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 2: GUIDANCE ON THE APPLICATION OF SERVICE MANAGEMENT SYSTEMS |
| 04/30123693 DC : DRAFT OCT 2004 | EN 15048-1 - NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS |
| CSA ISO/IEC 15504-3 : 2005 | INFORMATION TECHNOLOGY - PROCESS ASSESSMENT - PART 3: GUIDANCE ON PERFORMING AN ASSESSMENT |
| ASTM E 2108 : 2016 : REDLINE | Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer |
| ASTM F 2820 : 2012 | Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications |
| CSA ISO/IEC 20000-1 :2013 | INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 1: SERVICE MANAGEMENT SYSTEM REQUIREMENTS |
| CSA ISO 10005 : 2005 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY PLANS |
| CSA Z11140.1 : 2007 : R2012 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
| 07/30156246 DC : 0 | BS EN 1858 - CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS |
| BS EN ISO 9000-1:1994 | Quality management and quality assurance standards Guidelines for selection and use |
| CSA ISO 19011 : 2012 | GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS |
| DIN EN 10223-8:2014-04 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS |
| UNI CEN/TS 13598-3 : 2012 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| BS EN 50629 : 2015 | ENERGY PERFORMANCE OF LARGE POWER TRANSFORMERS (U[M] > 36 KV OR S[R] >= 40 MVA) |
| PREN 50238-1 : DRAFT 2017 | RAILWAY APPLICATIONS - COMPATIBILITY BETWEEN ROLLING STOCK AND TRAIN DETECTION SYSTEMS - PART 1: GENERAL |
| API 591 REDLINE : 2008 | PROCESS VALVE QUALIFICATION PROCEDURE |
| ASTM F 562 : 2013 : REDLINE | Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035) |
| NFPA 1975 : 2014 | EMERGENCY SERVICES WORK CLOTHING ELEMENTS |
| ISO Guide 64:2008 | Guide for addressing environmental issues in product standards |
| PREN 13249 : DRAFT 2015 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF ROADS AND OTHER TRAFFICKED AREAS (EXCLUDING RAILWAYS AND ASPHALT INCLUSION) |
| I.S. ISO 26000:2010 | GUIDANCE ON SOCIAL RESPONSIBILITY |
| PREN 9130 : 200P1 | AEROSPACE SERIES - QUALITY SYSTEMS - RECORD RETENTION |
| CSA ISO/TR 13121 : 2013 : R2017 | NANOTECHNOLOGIES - NANOMATERIAL RISK EVALUATION |
| PREN 9200 : 200P1 | AEROSPACE SERIES - PROGRAMME MANAGEMENT - GUIDELINES FOR PROJECT MANAGEMENT SPECIFICATION |
| BS ISO/IEC 25030:2007 | Software engineering. Software product quality requirements and evaluation (SQuaRE). Quality requirements |
| DIN EN 124-5:2015-09 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 5: GULLY TOPS AND MANHOLE TOPS MADE OF COMPOSITE MATERIALS |
| UNI EN 1474-3 : 2009 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 3: OFFSHORE TRANSFER SYSTEMS |
| UNI EN 54-25 : 2008 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS |
| UNI EN ISO 20857 : 2013 | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| SAE J 4000 : 1999 | IDENTIFICATION AND MEASUREMENT OF BEST PRACTICE IN IMPLEMENTATION OF LEAN OPERATION |
| PREN 9121 : 200P3 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - ASSESSMENT APPLICABLE TO STOCKIST DISTRIBUTORS |
| CSA ISO 10007 : 2003 : R2013 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR CONFIGURATION MANAGEMENT |
| EN 14688:2015 | Sanitary appliances - Wash basins - Functional requirements and test methods |
| AAMI ISO 11140-3 : 2007 : R2012 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 3: CLASS 2 INDICATOR SYSTEMS FOR USE IN THE BOWIE AND DICK-TYPE STEAM PENETRATION TEST |
| AAMI ISO 13408-1:2008 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS |
| UNI EN 3-10 : 2010 | PORTABLE FIRE EXTINGUISHERS - PART 10: PROVISIONS FOR EVALUATING THE CONFORMITY OF A PORTABLE FIRE EXTINGUISHER TO EN 3-7 |
| UNI CEN/TR 15276-2 : 2009 | FIXED FIREFIGHTING SYSTEMS - CONDENSED AEROSOL EXTINGUISHING SYSTEMS - PART 2: DESIGN, INSTALLATION AND MAINTENANCE |
| CSA ISO TR 14969 :2005 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
| CSA Z11140.1 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
| CSA Z11135-1 : 2009 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ANSI/AAMI/ISO 13408-6:2005(R2013)&A1:2013 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 6: ISOLATOR SYSTEMS |
| NFPA 1994 : 2018 | PROTECTIVE ENSEMBLES FOR FIRST RESPONDERS TO HAZARDOUS MATERIALS EMERGENCIES AND CBRN TERRORISM INCIDENTS |
| EN 13310:2015 | Kitchen sinks - Functional requirements and test methods |
| MSS SP 141 : 2012 | MULTI-TURN AND CHECK VALVE MODIFICATIONS |
| UNE-EN ISO 22442-2:2016 | Medical devices utilizing animal tissues and their derivatives - Part 2: Controls on sourcing, collection and handling (ISO 22442-2:2015) |
| UNE-EN ISO 11135:2015 | Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 11135:2014) |
| EN 14516:2015 | Baths for domestic purposes |
| BS ISO/IEC/IEEE 15939:2017 | Systems and software engineering. Measurement process |
| DIN EN ISO 20857:2013-08 | Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) |
| 17/30357427 DC | BS EN 13658-1. Metal lath and beads. Definitions, requirements and test methods. Part 1. Internal plastering |
| 16/30338240 DC | BS EN 1457-1. Chimney. Clay/ceramic flue liners. Part 1. Flue liners operating under dry conditions. Requirements and test methods |
| BIS IS/ISO 9000 : 2015 | QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY |
| BS EN 10088-4:2009 | Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| CSA ISO 9004-2 : 0 | QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS - PART 2: GUIDELINES FOR SERVICES |
| UNE-EN 16271:2013 | Value management - Functional expression of the need and functional performance specification - Requirements for expressing and validating the need to be satisfied within the process of purchasing or obtaining a product |
| S.R. CEN/TR 15569:2009 | SOLID BIOFUELS - A GUIDE FOR A QUALITY ASSURANCE SYSTEM |
| UNE-EN 50128:2012 | Railway applications - Communication, signalling and processing systems - Software for railway control and protection systems |
| SAE AS 6496 : 2014 | FRAUDULENT/COUNTERFEIT ELECTRONIC PARTS: AVOIDANCE, DETECTION, MITIGATION, AND DISPOSITION - AUTHORIZED/FRANCHISED DISTRIBUTION |
| PREN 9104 : 200P1 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM CERTIFICATION/REGISTRATIONS PROGRAMS |
| PREN 4649 : 200P1 | AEROSPACE SERIES - HANDHELD FIRE EXTINGUISHERS WITH SYNTHESIS GASES, FOR AIRCRAFT USE - TECHNICAL SPECIFICATION AND QUALIFICATION CONDITIONS |
| UNE-EN 15814:2011 | Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements |
| EI/JIG 1530 : 2013 | QUALITY ASSURANCE REQUIREMENTS FOR THE MANUFACTURE, STORAGE AND DISTRIBUTION OF AVIATION FUEL TO AIRPORTS |
| DD CEN/TS 45545-2:2009 | Railway applications. Fire protection on railway vehicles Requirements for fire behaviour of materials and components |
| UNE-EN ISO 14051:2012 | Environmental management. Material flow cost accounting. General framework (ISO 14051:2011) |
| PREN 13230-3 : DRAFT 2014 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 3: TWIN-BLOCK REINFORCED SLEEPERS |
| CSA ISO/IEC TR 20000-5 : 2015 | INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 5: EXEMPLAR IMPLEMENTATION PLAN FOR ISO/IEC 20000-1 |
| EN 14296:2015 | Sanitary appliances - Communal washing troughs |
| UNI ISO 10001 : 2008 | QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR CODES OF CONDUCT FOR ORGANIZATIONS |
| UNE-EN 50483-1:2013 | Test requirements for low voltage aerial bundled cable accessories -- Part 1: Generalities |
| PREN 13265 : DRAFT 2015 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN LIQUID WASTE CONTAINMENT PROJECTS |
| ISO/IEC 19770-1:2017 | Information technology — IT asset management — Part 1: IT asset management systems — Requirements |
| UNE-EN 14592:2009 | Timber structures - Dowel-type fasteners - Requirements |
| DD ENV ISO 11133-1:2000 | Microbiology of food and animal feeding stuffs. Guidelines on quality assurance and performance testing of culture media General guidelines on quality assurance of culture media in the laboratory |
| PREN 14179-2 : DRAFT 2017 | GLASS IN BUILDING - HEAT SOAKED THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 2: PRODUCT STANDARD |
| UNE-EN 16582-2:2015 | Domestic swimming pools - Part 2: Specific requirements including safety and test methods for inground pools |
| AAMI ISO 14161 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE, AND INTERPRETATION OF RESULTS |
| BS ISO 21927-2 : 2006 | SMOKE AND HEAT CONTROL SYSTEMS - PART 2: SPECIFICATION FOR NATURAL SMOKE AND HEAT EXHAUST VENTILATORS |
| I.S. EN 50483-1:2009 | TEST REQUIREMENTS FOR LOW VOLTAGE AERIAL BUNDLED CABLE ACCESSORIES - PART 1: GENERALITIES |
| ISO 11154-4:2004 | Road vehicles Roof load carriers Part 4: Magnetic fixing devices |
| I.S. EN IEC 62443-4-1:2018 | SECURITY FOR INDUSTRIAL AUTOMATION AND CONTROL SYSTEMS - PART 4-1: SECURE PRODUCT DEVELOPMENT LIFECYCLE REQUIREMENTS |
| ISO 10855-1:2018 | Offshore containers and associated lifting sets Part 1: Design, manufacture and marking of offshore containers |
| SAE J 563 : 2009 | STANDARD FOR 12 VOLT CIGARETTE LIGHTERS, POWER OUTLETS, AND ACCESSORY PLUGS |
| I.S. EN 61014:2003 | PROGRAMMES FOR RELIABILITY GROWTH |
| IEEE 730-2014 | IEEE Standard for Software Quality Assurance Processes |
| ISO 10007:2017 | Quality management — Guidelines for configuration management |
| ISO 16063-22:2005 | Methods for the calibration of vibration and shock transducers — Part 22: Shock calibration by comparison to a reference transducer |
| UNE-ISO 22004:2015 | Food safety management systems. Guidance on the application of ISO 22000 |
| I.S. EN 14636-2:2009 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE DRAINAGE AND SEWERAGE - POLYESTER RESIN CONCRETE (PRC) - PART 2: MANHOLES AND INSPECTION CHAMBERS |
| CSA ISO 11607-2 : 2016 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES |
| IWA 14-2:2013 | Vehicle security barriers — Part 2: Application |
| BS 2A241(2005) : 2005 | GENERAL REQUIREMENTS FOR STEEL PROTRUDING-HEAD BOLTS OF TENSILE STRENGTH 1250 MPA (180000 LBF/IN[2]) OR GREATER - SPECIFICATION |
| I.S. EN 15286:2013 | AGGLOMERATED STONE - SLABS AND TILES FOR WALL FINISHES (INTERNAL AND EXTERNAL) |
| I.S. EN ISO 2919:2014 | RADIOLOGICAL PROTECTION - SEALED RADIOACTIVE SOURCES - GENERAL REQUIREMENTS AND CLASSIFICATION (ISO 2919:2012) |
| I.S. EN 61189-2:2006 | TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 2: TEST METHODS FOR MATERIALS FOR INTERCONNECTION STRUCTURES |
| UNI EN 15530 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EVIRONMENTAL ASPECTS OF ALUMINIUM PRODUCTS - GENERAL GUIDELINES FOR THEIR INCLUSION IN STANDARDS |
| IWA 13:2014 | Multiple resource evaluation guideline |
| UNI EN 15286 : 2013 | AGGLOMERATED STONE - SLABS AND TILES FOR WALL FINISHES (INTERNAL AND EXTERNAL) |
| I.S. EN 60746-1:2003 | EXPRESSION OF PERFORMANCE OF ELECTROCHEMICAL ANALYZERS - PART 1: GENERAL |
| IEC 60494-2:2013 | Railway applications - Rolling stock - Pantographs - Characteristics and tests - Part 2: Pantographs for metros and light rail vehicles |
| I.S. EN 13245-2:2008 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 2: PVC-U PROFILES AND PVC-UE PROFILES FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES |
| I.S. EN 1254-8:2012 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 8: FITTINGS WITH PRESS ENDS FOR USE WITH PLASTICS AND MULTILAYER PIPES |
| UNI CEN/TR 13480-7 : 2012 | METALLIC INDUSTRIAL PIPING - PART 7: GUIDANCE ON THE USE OF CONFORMITY ASSESSMENT PROCEDURES |
| I.S. EN 15331:2011 | CRITERIA FOR DESIGN, MANAGEMENT AND CONTROL OF MAINTENANCE SERVICES FOR BUILDINGS |
| UNE-EN 9104-001:2013 | Aerospace series - Quality management systems - Part 001: Requirements for Aviation, Space, and Defence Quality Management System Certification Programs |
| I.S. EN 60794-4-20:2012 | OPTICAL FIBRE CABLES - PART 4-20: AERIAL OPTICAL CABLES ALONG ELECTRICAL POWER LINES - FAMILY SPECIFICATION FOR ADSS (ALL DIELECTRIC SELF SUPPORTED) OPTICAL CABLES (IEC 60794-4-20:2012 (EQV)) |
| UNI ISO/TS 22003 : 2014 | FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF FOOD SAFETY MANAGEMENT SYSTEMS |
| S.R. CLC/TS 50537-1:2010 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 1: HV BUSHING FOR TRACTION TRANSFORMERS |
| UNE-EN 492:2013 | Fibre-cement slates and fittings - Product specification and test methods |
| I.S. EN 10088-4:2009 | STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| S.R. CLC/TR 50506-2:2009 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - APPLICATION GUIDE FOR EN 50129 - PART 2: SAFETY ASSURANCE |
| S.R. CEN TR 15628:2007 | MAINTENANCE - QUALIFICATION OF MAINTENANCE PERSONNEL |
| S.R. CEN/TS 1453-2:2017 | PLASTICS PIPING SYSTEMS WITH STRUCTURED WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| CEI UNI EN ISO/IEC 80079-34 : 2013 | EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE |
| I.S. EN 1254-6:2012 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 6: FITTINGS WITH PUSH-FIT ENDS |
| I.S. EN ISO 23936-1:2009 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS |
| I.S. EN 12004-1:2017 | ADHESIVES FOR CERAMIC TILES - PART 1: REQUIREMENTS, ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, CLASSIFICATION AND MARKING |
| PREN 15276-2 : DRAFT 2017 | FIXED FIREFIGHTING SYSTEMS - CONDENSED AEROSOL EXTINGUISHING SYSTEMS - PART 2: DESIGN, INSTALLATION AND MAINTENANCE |
| UNE-EN 997:2013 | WC pans and WC suites with integral trap |
| EI/JIG 1530 : 2019 | Quality assurance requirements for the manufacture, storage and distribution of aviation fuel to airports (A4) |
| S.R. CEN/TS 13476-4:2013 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 4: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| I.S. EN 15683-2:2013 | GLASS IN BUILDING - THERMALLY TOUGHENED SODA LIME SILICATE CHANNEL SHAPED SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD |
| 17/30358164 DC : 0 | BS EN 14587-1 - RAILWAY APPLICATIONS - INFRASTRUCTURE - FLASH BUTT WELDING OF NEW RAILS - PART 1: R220, R260, R260MN, R320CR, R350HT, R350LHT, R370CRHT AND R400HT GRADE RAILS IN A FIXED PLANT |
| PREN 15102 : DRAFT 2016 | DECORATIVE WALLCOVERINGS - ROLL FORM |
| UNI CEI 70018 : 2009 | CONFORMITY ASSESSMENT - GUIDANCE ON THE USE OF AN ORGANIZATION'S QUALITY MANAGEMENT SYSTEM IN PRODUCT CERTIFICATION |
| ISO Guide 82:2014 | Guidelines for addressing sustainability in standards |
| PREN 15224 : DRAFT 2016 | HEALTH CARE SERVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS BASED ON EN ISO 9001:2015 |
| I.S. CWA 14172-1:2004 | EESSI CONFORMITY ASSESSMENT GUIDANCE - PART 1: GENERAL INTRODUCTION |
| S.R. CEN TR 15276-2:2009 | FIXED FIREFIGHTING SYSTEMS - CONDENSED AEROSOL EXTINGUISHING SYSTEMS - PART 2: DESIGN, INSTALLATION AND MAINTENANCE |
| ANSI/ASSE Z690 PACKAGE : 2011 | ANSI/ASSE Z690.1-2011 - VOCABULARY FOR RISK MANAGEMENT; ANSI/ASSE Z690.2-2011 - RISK MANAGEMENT - PRINCIPLES AND GUIDELINES; ANSI/ASSE Z690.3-2011 - RISK ASSESSMENT TECHNIQUES; ISO/ANSI/ASSE/TR-31004-2014 (Z690 TR-2014) RISK MANAGEMENT-GUIDANCE FOR THE IMPLEMENTATION OF ISO 31004 |
| BS ISO 26000:2010 | Guidance on social responsibility |
| I.S. EN ISO 11607-1:2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS (ISO 11607-1:2006, INCLUDING AMD 1:2014) |
| I.S. EN ISO 3266:2010 | FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010) |
| ISO/IEC TR 90006:2013 | Information technology Guidelines for the application of ISO 9001:2008 to IT service management and its integration with ISO/IEC 20000-1:2011 |
| I.S. EN 15821:2010 | MULTI-FIRING SAUNA STOVES FIRED BY NATURAL WOOD LOGS - REQUIREMENTS AND TEST METHODS |
| NF ISO 20683-2 : 2005 | AIRCRAFT GROUND EQUIPMENT - DESIGN, TEST AND MAINTENANCE FOR TOWBARLESS TOWING VEHICLES (TLTV) INTERFACED WITH NOSE-LANDING GEAR - PART 2: REGIONAL AIRCRAFT |
| I.S. EN 61192-2:2003 | WORKMANSHIP REQUIREMENTS FOR SOLDERED ELECTRONIC ASSEMBLIES - SURFACE-MOUNT ASSEMBLIES |
| ISO 20858:2007 | Ships and marine technology — Maritime port facility security assessments and security plan development |
| I.S. EN 61069-2:2016 | INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 2: ASSESSMENT METHODOLOGY |
| UNI EN 14229 : 2010 | STRUCTURAL TIMBER - WOOD POLES FOR OVERHEAD LINES |
| CSA Z15189 : 2003 | MEDICAL LABORATORIES - PARTICULAR REQUIREMENTS FOR QUALITY AND COMPETENCE |
| ISO 15686-3:2002 | Buildings and constructed assets — Service life planning — Part 3: Performance audits and reviews |
| UNE ISO 20252 : 2012 | MARKET, OPINION AND SOCIAL RESEARCH - VOCABULARY AND SERVICE REQUIREMENTS |
| IWA 26:2017 | Using ISO 26000:2010 in management systems |
| ISO/IEC 15944-9:2015 | Information technology — Business operational view — Part 9: Business transaction traceability framework for commitment exchange |
| ISO/PAS 30004:2011 | Ships and marine technology Ship recycling management systems - Guidelines for the implementation of ISO 30000 |
| DIN EN 12261:2007-07 | GAS METERS - TURBINE GAS METERS |
| CSA CEI/IEC 62304:14 (R2019) | Medical device software - Software life cycle processes (Adopted CEI/IEC 62304:2006, first edition, 2006-05) | Logiciels de dispositifs médicaux - Processus du cycle de vie du logiciel (norme CEI/IEC 62304:2006 adoptée, première édition, 2006-05) |
| I.S. EN 61189-5-4:2015 | TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-4: GENERAL TEST METHODS FOR MATERIALS AND ASSEMBLIES - SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID WIRE FOR PRINTED BOARD ASSEMBLIES |
| I.S. EN 16484:2015 | LEATHER - REQUIREMENTS FOR THE DETERMINATION OF THE ORIGIN OF LEATHER PRODUCTION |
| PD ISO/TS 19930:2017 | Guidance on aspects of a risk-based approach to assuring sterility of terminally sterilized, single-use health care product that is unable to withstand processing to achieve maximally a sterility assurance level of 10-6 |
| I.S. EN 14516:2015 | BATHS FOR DOMESTIC PURPOSES |
| BS EN 13310 : 2015 | KITCHEN SINKS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| IEC 60092-306:2009 | Electrical installations in ships - Part 306: Equipment - Luminaires and lighting accessories |
| EN 16910-1:2018 | Railway applications - Rolling stock - Requirements for non-destructive testing on running gear in railway maintenance - Part 1: Wheelsets |
| I.S. EN 1013:2012 | LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| DD ENV 14236:2002 | Ultrasonic domestic gas meters |
| I.S. EN 12101-7:2011 | SMOKE AND HEAT CONTROL SYSTEMS - PART 7: SMOKE DUCT SECTIONS |
| AQAP 2000 : 2009 | NATO POLICY ON AN INTEGRATED SYSTEMS APPROACH TO QUALITY THROUGH THE LIFE CYCLE |
| PREN 14055 : DRAFT 2017 | WC AND URINAL FLUSHING CISTERNS |
| ISO 13485 - PRACTICAL GUIDE : 2016 | ISO 13485:2016 - MEDICAL DEVICES - A PRACTICAL GUIDE |
| PREN 54-29 : DRAFT 2009 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 29: MULTI-SENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF SMOKE AND HEAT SENSORS |
| UNE-EN 12467:2013 | Fibre-cement flat sheets - Product specification and test methods |
| ISO/TR 13121:2011 | Nanotechnologies — Nanomaterial risk evaluation |
| PREN 54-4 : DRAFT 2015 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 4: POWER SUPPLY EQUIPMENT |
| CEI UNI EN 45510-6-2 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-2: TURBINE AUXILIARIES - FEEDWATER HEATERS |
| PREN 13230-2 : DRAFT 2014 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 2: PRESTRESSED MONOBLOCK SLEEPERS |
| ISO/TS 22163:2017 | Railway applications — Quality management system — Business management system requirements for rail organizations: ISO 9001:2015 and particular requirements for application in the rail sector |
| ISO 13270:2013 | Steel fibres for concrete — Definitions and specifications |
| EN 9120:2010 | Quality Management Systems - Requirements for Aviation, Space and Defence Distributors |
| IEC TS 62686-1:2015 | Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 1: General requirements for high reliability integrated circuits and discrete semiconductors |
| PREN 12050-1 : DRAFT 2012 | WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 1: LIFTING PLANTS FOR WASTEWATER CONTAINING FAECAL MATTER |
| CEI UNI EN 45510-4-8 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-8: BOILER AUXILIARIES - DUST HANDLING PLANT |
| I.S. EN 9110:2015 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION MAINTENANCE ORGANIZATIONS |
| PREN 14065 : DRAFT 2014 | TEXTILES - LAUNDRY PROCESSED TEXTILES - BIOCONTAMINATION CONTROL SYSTEM |
| CEI EN 60076-1 : 2015 | POWER TRANSFORMERS - PART 1: GENERAL |
| PREN 15276-1 : DRAFT 2017 | FIXED FIREFIGHTING SYSTEMS - CONDENSED AEROSOL EXTINGUISHING SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| PREN 54-22 : DRAFT 2011 | FIRE DETECTION AND FIRE ALARM SYSTEM - PART 22: RESETTABLE LINE TYPE HEAT DETECTORS |
| DIN EN ISO 14253-2:2011-11 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION (ISO 14253-2:2011) |
| 16/30312379 DC : 0 | BS EN 54-2 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT |
| 16/30343246 DC : 0 | BS EN 1125 - BUILDING HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| ISO 13007-5:2015 | Ceramic tiles Grouts and adhesives Part 5: Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic tiling bonded with adhesives |
| UNI EN ISO 19258 : 2011 | SOIL QUALITY - GUIDANCE ON THE DETERMINATION OF BACKGROUND VALUES |
| UNI EN 15102 : 2011 | DECORATIVE WALL COVERINGS - ROLL AND PANEL FORM |
| I.S. EN 54-3:2014 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS |
| 14/30297462 DC : 0 | BS EN 15015 - PLASTICS PIPING SYSTEMS - HOT AND COLD WATER PIPING COMPONENTS - REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR PIPES AND FITTINGS |
| 16/30334290 DC : 0 | BS EN 14382 - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURE UP TO 100 BAR |
| BS EN ISO/IEC 17011:2017 | Conformity assessment. Requirements for accreditation bodies accrediting conformity assessment bodies |
| BS EN 9133:2004 | Aerospace series. Quality management systems. Qualification procedure for aerospace standard parts |
| 13/30271701 DC : 0 | BS EN 16510-1 - RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| BS EN 1279-2:2002 | Glass in building. Insulating glass units Long term test method and requirements for moisture penetration |
| I.S. CEN ISO TR 3834-6:2007 | QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS - PART 6: GUIDELINES ON IMPLEMENTING ISO 3834 |
| 14/30311487 DC : 0 | BS EN 14188-2 - JOINT FILLERS AND SEALANTS - PART 2: SPECIFICATIONS FOR COLD APPLIED SEALANTS |
| DIN EN 1400:2014-07 | CHILD USE AND CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - SAFETY REQUIREMENTS AND TEST METHODS |
| 17/30357436 DC : 0 | BS EN 13454-1 - BINDERS AND FACTORY MADE MIXTURES FOR FLOOR SCREEDS BASED ON CALCIUM SULPHATE - PART 1: DEFINITIONS AND REQUIREMENTS |
| UNE-EN ISO 11607-2:2017 | Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2006, including Amd 1:2014) |
| 16/30323363 DC : 0 | BS EN 12259-9 - FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS - PART 9: DELUGE ALARM VALVES |
| I.S. EN 15564:2008 | PRECAST CONCRETE PRODUCTS - RESIN BOUND CONCRETE - REQUIREMENTS AND TEST METHODS |
| DIN EN 14296:2015-09 | SANITARY APPLIANCES - COMMUNAL WASHING TROUGHS |
| 15/30290856 DC : 0 | BS EN 54-4 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 4 : POWER SUPPLY EQUIPMENT |
| UNI EN 14811 : 2010 | RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
| UNI EN ISO 11607-1 : 2014 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
| CAN/CSA-C22.2 NO. 60896-22:17 | Stationary lead-acid batteries — Part 22: Valve regulated types - Requirements (Adopted IEC 60896-22:2004, first edition, 2004-02, with Canadian deviations) | Batteries stationnaires au plomb - Partie 22 : Types étanches à soupapes - Exigences (norme IEC 60896-22:2004 adoptée, première édition, 2004-02, avec exigences propres au Canada) |
| API 6D :2015 | SPECIFICATION FOR PIPELINE AND PIPING VALVES |
| I.S. EN 54-24:2008 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: COMPONENTS OF VOICE ALARM SYSTEMS - LOUDSPEAKERS |
| ASTM F 1091 : 2012 : REDLINE | Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy Surgical Fixation Wire (UNS R30605) |
| S.R. ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| CSA S478 : 0 | GUIDELINE ON DURABILITY OF BUILDINGS |
| UNI EN 14535-2 : 2011 | RAILWAY APPLICATIONS - BRAKE DISCS FOR RAILWAY ROLLING STOCK - PART 2: BRAKE DISCS MOUNTED ONTO THE WHEEL, DIMENSIONS AND QUALITY REQUIREMENTS |
| BS EN ISO 12944-1:2017 | Paints and varnishes. Corrosion protection of steel structures by protective paint systems General introduction |
| PREN 13674-2 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| PD ISO/IEC TR 19760:2003 | Systems engineering. A guide for the application of ISO/IEC 15288 (System life cycle processes) |
| EN ISO 12944-4:2017 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 4: Types of surface and surface preparation (ISO 12944-4:2017) |
| ISO 18647:2017 | Petroleum and natural gas industries — Modular drilling rigs for offshore fixed platforms |
| NF EN 61190-1-3 : 2008 AMD 1 2010 | Fastening materials for electronic assemblies - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non fluxed solid solders for electronic soldering applications |
| UNI EN ISO 14253-2 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION |
| PREN 197-2 : DRAFT 2012 | CEMENT - PART 2: CONFORMITY EVALUATION |
| CEN/TR 15840:2009 | Evaluation of conformity of fly ash for concrete - Guidelines for the application of EN 450-2 |
| UNE-EN 12966:2015 | Road vertical signs - Variable message traffic signs |
| ASTM F 3091/F3091M : 2014 | Standard Specification for Powder Bed Fusion of Plastic Materials |
| PREN 14904-2 : DRAFT 2017 | SURFACES FOR SPORTS AREAS - MULTI-SPORTS FLOOR SYSTEMS FOR INDOOR USE - PART 2: SPECIFICATIONS |
| PREN 14195 : DRAFT 2011 | METAL FRAMING COMPONENTS FOR GYPSUM BOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| PREN 12566-7 : DRAFT 2015 | SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 7: PREFABRICATED TERTIARY TREATMENT UNITS |
| CLC/TS 61112:2006 | Blankets of insulating material for electrical purposes |
| ASTM F 3130 : 2018 | Standard Practice for Language Service Companies |
| SAE AS 9014 : 2015 | AMERICAS AEROSPACE QUALITY GROUP (AAQG) REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM CERTIFICATION/REGISTRATIONS PROGRAMS |
| UNE-ISO/IEC TR 20000-3:2011 IN | Information technology. Service management. Part 3: Guidance on scope definition and applicability of ISO/IEC 20000-1 |
| CEI EN 62430 : 2011 | ENVIRONMENTALLY CONSCIOUS DESIGN FOR ELECTRICAL AND ELECTRONIC PRODUCTS |
| UNI CEI ISO/IEC 20000-2 : 2010 | INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 2: CODE OF PRACTICE |
| DIN EN 14587-1:2016-08 (Draft) | RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 1: NEW R220, R260, R260MN AND R350HT GRADE RAILS IN FIXED PLANT |
| PREN 12952-1 : DRAFT 2014 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 1: GENERAL |
| PREN 12449 : DRAFT 2011 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
| PREN 14901 : DRAFT 2014 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING (HEAVY DUTY) OF DUCTILE IRON FITTINGS AND ACCESSORIES - REQUIREMENTS AND TEST METHODS |
| ASTM F 648 : 2014 : REDLINE | Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants |
| ASTM F 3001 : 2014 : REDLINE | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion |
| IECQ 03-6:2012 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PROCEDURE - PART 6: IECQ ITL SCHEME - INDEPENDENT TESTING LABORATORY ASSESSMENT PROGRAM REQUIREMENTS |
| CEI EN 50556 : 2012 | ROAD TRAFFIC SIGNAL SYSTEMS |
| PREN 14041 : DRAFT 2016 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS |
| PREN 14516 : DRAFT 2015 | BATHS FOR DOMESTIC PURPOSES |
| CEI UNI EN 45510-4-10 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-10: BOILER AUXILIARIES - FLUE GAS DENITRIFICATION (DE-NOX) PLANT |
| PREN 14534 : DRAFT 2014 | POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF THE TRANSIT TIME OF END-TO-END SERVICES FOR BULK MAIL |
| ASTM F 3160 : 2016 | Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants |
| UNE-EN 12566-7:2017 | Small wastewater treatment systems for up to 50 PT - Part 7: Prefabricated tertiary treatment units |
| CEN/TR 15569:2009 | Solid biofuels - A guide for a quality assurance system |
| ASTM F 1511 : 2016-11 | SPECIFICATION FOR MECHANICAL SEALS FOR SHIPBOARD PUMP APPLICATIONS |
| UNE-ISO 2859-3:2014 | Sampling procedures for inspection by attributes. Part 3: Skip-lot sampling procedures |
| UNE-EN ISO 7396-1:2016 | Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016) |
| UNI EN ISO 14031 : 2013 | ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL PERFORMANCE EVALUATION - GUIDELINES |
| EN 15382:2018 | Geosynthetic barriers - Characteristics required for use in transportation infrastructure |
| ISO 10904:2011 | Fibre-cement corrugated sheets and fittings for roofing and cladding |
| EN 13369:2018 | Common rules for precast concrete products |
| EN 9110:2015 | Quality Management Systems - Requirements for Aviation Maintenance Organizations |
| ISO 7186:2011 | Ductile iron products for sewerage applications |
| UNI CEI EN ISO 50001 : 2011 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| EN 4710-01:2015 | Aerospace series - Quick release fastening systems for non-structural applications - Part 01: Technical specification |
| ISO 10004:2012 | Quality management Customer satisfaction Guidelines for monitoring and measuring |
| DIN EN 16914:2015-12 (Draft) | ALUMINIUM AND ALUMINIUM ALLOYS - HOT-ROLLED ARMOUR PLATES IN WELDABLE ALUMINIUM ALLOY - TECHNICAL DELIVERY CONDITIONS |
| PREN 15399 : DRAFT 2016 | GAS INFRASTRUCTURE - SAFETY MANAGEMENT SYSTEMS FOR GAS NETWORKS WITH MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR |
| EN 14811:2006+A1:2009 | Railway applications - Track - Special purpose rail - Grooved and associated construction |
| ISO 15206:2010 | Timber poles Basic requirements and test methods |
| ISO 16762:2016 | Graphic technology Post-press General requirements for transfer, handling and storage |
| ISO 14885:2014 | Large yachts Diesel engines for main propulsion and essential auxiliaries Safety requirements |
| EN 492:2012+A2:2018 | Fibre-cement slates and fittings - Product specification and test methods |
| UNE-EN 14423:2014 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| ISO/IEC 25030:2007 | Software engineering Software product Quality Requirements and Evaluation (SQuaRE) Quality requirements |
| ISO 6517:2013 | Air cargo — Certified lower deck containers — Design and testing |
| BS EN 12764 : 2015 | SANITARY APPLIANCES - SPECIFICATION FOR WHIRLPOOL BATHS |
| ISO/IEC 40180:2017 | Information technology — Quality for learning, education and training — Fundamentals and reference framework |
| I.S. EN 15389:2008 | INDUSTRIAL VALVES - PERFORMANCE CHARACTERISTICS OF THERMOPLASTIC VALVES WHEN USED AS CONSTRUCTION PRODUCTS |
| I.S. EN 4136:2009 | AEROSPACE SERIES - BOLTS, NORMAL BI-HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| ISO 14300-1:2011 | Space systems — Programme management — Part 1: Structuring of a project |
| EN 12480:2018 | Gas meters - Rotary displacement gas meters |
| EN 14528:2015 | Bidets - Functional requirements and test methods |
| ISO/TR 3834-6:2007 | Quality requirements for fusion welding of metallic materials — Part 6: Guidelines on implementing ISO 3834 |
| I.S. EN 14592:2008 | TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
| ISO 11077:2014 | Aircraft ground equipment De-icers Functional requirements |
| ISO/TR 13881:2000 | Petroleum and natural gas industries Classification and conformity assessment of products, processes and services |
| IEC TS 62564-1:2016 | Process management for avionics - Aerospace qualified electronic components (AQEC) - Part 1: Integrated circuits and discrete semiconductors |
| UNI EN ISO 22301 : 2014 | SOCIETAL SECURITY - BUSINESS CONTINUITY MANAGEMENT SYSTEMS - REQUIREMENTS |
| ISO 16691:2014 | Space systems — Thermal control coatings for spacecraft — General requirements |
| ISO 23711:2003 | Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers |
| I.S. EN 3226:2009 | NUTS, HEXAGON, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, STEEL, CADMIUM PLATED - CLASSIFICATION 1100 MPA/235 DEGREES C |
| ISO 9384:1991 | Fibre-cement siding shingles |
| I.S. CEN TS 14421:2006 | HOSE TAIL AND FERRULE FOR CRIMPING AND SWAGING |
| I.S. EN 13674-4:2006 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| ISO 29400:2015 | Ships and marine technology Offshore wind energy Port and marine operations |
| I.S. EN 9120:2010 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENCE DISTRIBUTORS |
| IEC TR 62001-4:2016 | High-voltage direct current (HVDC) systems - Guidance to the specification and design evaluation of AC filters - Part 4: Equipment |
| IEC 60076-8:1997 | Power transformers - Part 8: Application guide |
| ISO/IEC TR 19760:2003 | Systems engineering A guide for the application of ISO/IEC 15288 (System life cycle processes) |
| I.S. CWA 14172-6:2004 | EESSI CONFORMITY ASSESSMENT GUIDANCE - PART 6: SIGNATURE-CREATION DEVICE SUPPORTING SIGNATURES OTHER THAN QUALIFIED |
| I.S. EN ISO 15175:2011 | SOIL QUALITY - CHARACTERIZATION OF SOIL RELATED TO GROUNDWATER PROTECTION |
| I.S. EN 13674-2:2006 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| I.S. EN 54-16:2008 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 16: VOICE ALARM CONTROL AND INDICATING EQUIPMENT |
| IWA 12:2013 | Guidelines on the application of ISO 9001:2008 in policing organizations |
| ISO 28278-2:2010 | Glass in building — Glass products for structural sealant glazing — Part 2: Assembly rules |
| UNI EN 13422 : 2009 | VERTICAL ROAD SIGNS - PORTABLE DEFORMABLE WARNING DEVICES AND DELINEATORS - PORTABLE ROAD TRAFFIC SIGNS - CONES AND CYLINDERS |
| I.S. EN 61020-1:2009 | ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| I.S. EN ISO 19258:2011 | SOIL QUALITY - GUIDANCE ON THE DETERMINATION OF BACKGROUND VALUES |
| I.S. HD 620:2010 | DISTRIBUTION CABLES WITH EXTRUDED INSULATION FOR RATED VOLTAGES FROM 3,6/6 (7,2) KV UP TO AND INCLUDING 20,8/36 (42) KV |
| I.S. ISO 9004-2:1994 | QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS - PART 2: GUIDELINES FOR SERVICES |
| ISO/IEC 12207:2008 | Systems and software engineering — Software life cycle processes |
| ISO 8009:2014 | Mechanical contraceptives — Reusable natural and silicone rubber contraceptive diaphragms — Requirements and tests |
| IEC 60987:2007+AMD1:2013 CSV | Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems |
| IEC TR 62476:2010 | Guidance for evaluation of product with respect to substance-use restrictions in electrical and electronic products |
| ISO/IEC 15939:2007 | Systems and software engineering Measurement process |
| I.S. EN ISO 14253-2:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION |
| I.S. ISO 10006:2005 | QUALITY MANAGEMENT - GUIDELINES TO QUALITY MANAGEMENT IN PROJECTS |
| ISO 22159:2007 | Personal equipment for protection against falls — Descending devices |
| I.S. EN ISO 14006:2011 | ENVIRONMENTAL MANAGEMENT SYSTEMS - GUIDELINES FOR INCORPORATING ECODESIGN |
| I.S. EN ISO 28765:2016 | VITREOUS AND PORCELAIN ENAMELS - DESIGN OF BOLTED STEEL TANKS FOR THE STORAGE OR TREATMENT OF WATER OR MUNICIPAL OR INDUSTRIAL EFFLUENTS AND SLUDGES (ISO 28765:2016) |
| I.S. EN 15012:2007 | PLASTICS PIPING SYSTEMS - SOIL AND WASTE DISCHARGE SYSTEMS WITHIN THE BUILDING STRUCTURE - PERFORMANCE CHARACTERISTICS FOR PIPES, FITTINGS AND THEIR JOINTS |
| S.R. CR 12804:1997 | CONCEPTUAL MODEL AND TAXONOMY FOR INFORMATION SYSTEMS ENGINEERING |
| I.S. EN 50290-2-20:2016 | COMMUNICATION CABLES - PART 2-20: COMMON DESIGN RULES AND CONSTRUCTION - GENERAL |
| ISO/TS 16195:2013 | Nanotechnologies Guidance for developing representative test materials consisting of nano-objects in dry powder form |
| IEC PAS 61249-6-3:2011 | Specification for finished fabric woven from "E" glass for printed boards |
| I.S. EN 997:2012 | WC PANS AND WC SUITES WITH INTEGRAL TRAP |
| IEC 62845:2015 | Railway applications - Radio remote control system of traction vehicles for shunting application |
| I.S. EN 3538:2010 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, TWO LUG, REDUCED SERIES, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| IECQ 080000-EN:2012 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - HAZARDOUS SUBSTANCE PROCESS MANAGEMENT SYSTEM REQUIREMENTS (HSPM) |
| I.S. EN 12480:2018 | GAS METERS - ROTARY DISPLACEMENT GAS METERS |
| I.S. EN 14587-1:2007 | RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 1: NEW R220, R260, R260MN AND R350HT GRADE RAILS IN A FIXED PLANT |
| S.R. CWA 15832:2008 | HUMANITARIAN MINE ACTION - FOLLOW-ON PROCESSES AFTER THE USE OF DEMINING MACHINES |
| IEC TS 62668-2:2016 | Process management for avionics - Counterfeit prevention - Part 2: Managing electronic components from non-franchised sources |
| ISO 9763:1999 | Aerospace — Aircraft control wire rope assemblies — Technical specification |
| I.S. EN 4649:2009 | AEROSPACE SERIES - HANDHELD FIRE EXTINGUISHERS WITH SYNTHESIS GASES, FOR AIRCRAFT USE - TECHNICAL SPECIFICATION AND QUALIFICATION CONDITIONS |
| I.S. EN 61189-6:2006 | TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 6: TEST METHODS FOR MATERIALS USED IN MANUFACTURING ELECTRONIC ASSEMBLIES |
| I.S. EN 54-25:2008 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS |
| ISO/IEC 15426-1:2006 | Information technology Automatic identification and data capture techniques Bar code verifier conformance specification Part 1: Linear symbols |
| I.S. EN 14545:2008 | TIMBER STRUCTURES - CONNECTORS - REQUIREMENTS |
| I.S. EN 4127:2009 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ALUMINIUM 4D COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| ISO 2859-3:2005 | Sampling procedures for inspection by attributes — Part 3: Skip-lot sampling procedures |
| IEC 61191-1:2013 | Printed board assemblies - Part 1: Generic specification - Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies |
| I.S. CR ISO 17663:2001 | WELDING - GUIDELINES FOR QUALITY REQUIREMENTS FOR HEAT TREATMENT IN CONNECTION WITH WELDING AND ALLIED PROCESSES |
| I.S. EN 15285:2008 | AGGLOMERATED STONE - MODULAR TILES FOR FLOORING AND STAIRS (INTERNAL AND EXTERNAL) |
| I.S. EN ISO/IEC 17024:2012 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR BODIES OPERATING CERTIFICATION OF PERSONS (ISO/IEC 17024:2012) |
| I.S. EN 15542:2008 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL CEMENT MORTAR COATING FOR PIPES - REQUIREMENTS AND TEST METHODS |
| EN 12897:2016 | Water supply - Specification for indirectly heated unvented (closed) storage water heaters |
| I.S. EN 14889-2:2007 | FIBRES FOR CONCRETE - PART 2: POLYMER FIBRES - DEFINITIONS, SPECIFICATIONS AND CONFORMITY |
| UNE-EN ISO 15883-1:2009 | Washer-disinfectors - Part 1: General requirements, terms and definitions and tests (ISO 15883-1:2006) |
| I.S. EN 13279-1:2008 | GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
| BS EN ISO 11607-1:2020 | Packaging for terminally sterilized medical devices Requirements for materials, sterile barrier systems and packaging systems |
| I.S. EN 12839:2012 | PRECAST CONCRETE PRODUCTS - ELEMENTS FOR FENCES |
| DIN EN ISO 9000:2015-11 | QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY (ISO 9000:2015) |
| DIN EN 14532-3:2005-02 | WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 3: CONFORMITY ASSESSMENT OF WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINIUM ALLOYS |
| DIN EN 12798:2007-08 | Transport quality management system - Road, rail and inland navigation transport - Quality management system requirements to supplement EN ISO 9001 for the transport of dangerous goods with regard to safety |
| DIN EN 14209:2016-02 (Draft) | PREFORMED PLASTERBOARD CORNICES - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN 14023:2013-04 | Bitumen and bituminous binders - Specification framework for polymer modified bitumens |
| DIN EN 10255:2015-05 (Draft) | Non-Alloy steel tubes suitable for welding, threading and other joining methods - Requirements and test methods; German and English version prEN 10255:2015 |
| DIN EN ISO 16106:2006-06 | PACKAGING - TRANSPORT PACKAGES FOR DANGEROUS GOODS - DANGEROUS GOODS PACKAGINGS, INTERMEDIATE BULK CONTAINERS (IBCS) AND LARGE PACKAGINGS - GUIDELINES FOR THE APPLICATION OF ISO 9001 |
| DIN EN 10242:1995-03 | THREADED PIPE FITTING IN MALLEABLE CAST IRON |
| DIN EN ISO 1461:2009-10 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| DIN EN 14190:2014-09 | Gypsum board products from reprocessing - Definitions, requirements and test methods |
| DIN EN 13693:2009-10 | Precast concrete products - Special roof elements (includes Amendment A1:2009) |
| DIN EN 15048-1:2016-09 | NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS |
| DIN EN ISO 14161:2010-03 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| DIN EN 13481-5:2012-08 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 5: FASTENING SYSTEMS FOR SLAB TRACK WITH RAIL ON THE SURFACE OR RAIL EMBEDDED IN A CHANNEL |
| DIN EN 13969:2007-03 | FLEXIBLE SHEETS FOR WATERPROOFING - BITUMEN DAMP PROOF SHEETS INCLUDING BITUMEN BASEMENT TANKING SHEETS - DEFINITIONS AND CHARACTERISTICS |
| DIN EN 12050-2:2015-05 | WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 2: LIFTING PLANTS FOR FAECAL-FREE WASTEWATER |
| DIN EN 253:2015-12 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PIPE ASSEMBLY OF STEEL SERVICE PIPE, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| DIN EN 607:2005-02 | Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing |
| DIN EN 442-1:2015-03 | RADIATORS AND CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS |
| DIN EN 969:2009-07 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS |
| DIN EN 998-1:2015-11 (Draft) | SPECIFICATION FOR MORTAR FOR MASONRY - PART 1: RENDERING AND PLASTERING MORTAR |
| DIN EN 13802:2014-03 | Railway applications - Suspension components - Hydraulic dampers |
| DIN EN ISO 14534:2015-08 | Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2011) |
| DIN EN 10223-3:2014-04 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES |
| DIN EN 12101-10:2006-01 | SMOKE AND HEAT CONTROL SYSTEMS - PART 10: POWER SUPPLIES |
| DIN EN 12094-8:2016-06 (Draft) | FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 8: REQUIREMENTS AND TEST METHODS FOR CONNECTORS |
| DIN EN 14081-1:2016-06 | TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 1: GENERAL REQUIREMENTS |
| DIN EN 862:2016-09 | PACKAGING - CHILD-RESISTANT PACKAGING - REQUIREMENTS AND TESTING PROCEDURES FOR NON-RECLOSABLE PACKAGES FOR NON-PHARMACEUTICAL PRODUCTS |
| DIN EN 1263-1:2015-03 | TEMPORARY WORKS EQUIPMENT - SAFETY NETS - PART 1: SAFETY REQUIREMENTS, TEST METHODS |
| DIN EN 1463-1:2009-07 | Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements |
| DIN EN 1:2013-06 (Draft) | FLUED OIL STOVES WITH VAPORIZING BURNERS |
| DIN EN 13967:2012-07 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF SHEETS INCLUDING PLASTIC AND RUBBER BASEMENT TANKING SHEET - DEFINITIONS AND CHARACTERISTICS |
| DIN EN ISO 13485:2016-08 | Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2016) |
| DIN EN ISO 16426:2003-06 | FASTENERS - QUALITY ASSURANCE SYSTEM |
| BS EN 12101-6:2005 | Smoke and heat control systems Specification for pressure differential systems. Kits |
| BS EN 1453-1:2000 | Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly (vinyl chloride) (PVC-U) Specifications for pipes and the system |
| UNE-EN 13230-1:2016 | Railway applications - Track - Concrete sleepers and bearers - Part 1: General requirements |
| BS EN 351-1:2007 | Durability of wood and wood-based products. Preservative-treated solid wood Classification of preservative penetration and retention |
| ISO 14937:2009 | Sterilization of health care products General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
| BS EN 1863-2:2004 | Glass in building. Heat strengthened soda lime silicate glass Evaluation of conformity. Product standard |
| 17/30365636 DC : 0 | BS EN 62239-1 ED.1.0 - PROCESS MANAGEMENT FOR AVIONICS - MANAGEMENT PLAN - PART 1: PREPARATION AND MAINTENANCE OF AN ELECTRONIC COMPONENTS MANAGEMENT PLAN |
| BS EN 13658-1:2005 | Metal lath and beads. Definitions, requirements and test methods Internal plastering |
| PD IEC/TS 62239-1:2015 | Process management for avionics. Management plan Preparation and maintenance of an electronic components management plan |
| BS EN 12050-1:2015 | Wastewater lifting plants for buildings and sites Lifting plants for wastewater containing faecal matter |
| BS EN 13707:2013 | Flexible sheets for waterproofing. Reinforced bitumen sheets for roof waterproofing. Definitions and characteristics |
| BS EN 14904:2006 | Surfaces for sports areas. Indoor surfaces for multi-sports use. Specification |
| BS EN 45510-1:1998 | Guide for the procurement of power station equipment Common clauses |
| BS EN 54-12:2015 | Fire detection and fire alarm systems Smoke detectors. Line detectors using an optical beam |
| BS EN 12165:2011 | Copper and copper alloys. Wrought and unwrought forging stock |
| BS EN 14137:2003 | Postal services. Quality of service. Measurement of loss of registered mail and other types of postal service using a track and trace system |
| BS EN 12101-10:2005 | Smoke and heat control systems Power supplies |
| BS EN 13950:2014 | Gypsum board thermal/acoustic insulation composite panels. Definitions, requirements and test methods |
| IEC 61069-2:2016 | Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 2: Assessment methodology |
| UNE-EN 1253-3:2017 | Gullies for buildings - Part 3: Evaluation of conformity |
| BS EN 14023:2010 | Bitumen and bituminous binders. Specification framework for polymer modified bitumens |
| BS EN 683-1:2006 | Aluminium and aluminium alloys. Finstock Technical conditions for inspection and delivery |
| BS EN 45510-6-7:1998 | Guide for the procurement of power station equipment. Turbine auxiliaries Moisture separator reheaters |
| IEC 61479:2001+AMD1:2002 CSV | Live working - Flexible conductor covers (line hoses) of insulating material |
| I.S. EN ISO 19900:2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - GENERAL REQUIREMENTS FOR OFFSHORE STRUCTURES (ISO 19900:2013) |
| 11/30242263 DC : 0 | BS EN 4691-001 - AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - TECHNICAL SPECIFICATION |
| UNE-EN 13481-3:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 3: Fastening systems for wood sleepers |
| BS EN 13984:2013 | Flexible sheets for waterproofing. Plastic and rubber vapour control layers. Definitions and characteristics |
| BS EN 14375:2003 | Child-resistant non-reclosable packaging for pharmaceutical products. Requirements and testing |
| BS EN ISO 11140-4:2007 | Sterilization of health care products. Chemical indicators Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration |
| ISO 12679:2011 | Thermal spraying Recommendations for thermal spraying |
| ISO 22442-2:2015 | Medical devices utilizing animal tissues and their derivatives Part 2: Controls on sourcing, collection and handling |
| BS EN ISO 14922-4:1999 | Thermal spraying. Quality requirements of thermally sprayed structures Elementary quality requirements |
| BS EN 10255:2004 | Non-alloy steel tubes suitable for welding and threading. Technical delivery conditions |
| BS EN 12735-1:2016 | Copper and copper alloys. Seamless, round tubes for air conditioning and refrigeration Tubes for piping systems |
| BS EN 1982:2017 | Copper and copper alloys. Ingots and castings |
| UNE-EN 13225:2013 | Precast concrete products - Linear structural elements |
| 10/30148779 DC : DRAFT NOV 2010 | BS EN ISO 13628-8 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 8: REMOTELY OPERATED TOOLS AND INTERFACES ON SUBSEA PRODUCTION SYSTEMS |
| 12/30228018 DC : 0 | BS EN 61557-15 - ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 15: FUNCTIONAL SAFETY REQUIREMENTS FOR INSULATION MONITORING DEVICES AND FOR EQUIPMENT FOR INSULATION FAULT LOCATION IN IT SYSTEMS |
| BS EN 10025-1:2004 | Hot rolled products of structural steels General technical delivery conditions |
| BS EN 12094-12:2003 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for pneumatic alarm devices |
| BS EN 13481-5 : 2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 5: FASTENING SYSTEMS FOR SLAB TRACK WITH RAIL ON THE SURFACE OR RAIL EMBEDDED IN A CHANNEL |
| BS EN 74-1:2005 | Couplers, spigot pins and baseplates for use in falsework and scaffolds Part 1: Couplers for tubes. Requirements and test procedures |
| BS EN 54-23:2010 | Fire detection and fire alarm systems Fire alarm devices. Visual alarm devices |
| BS EN 13612:2002 | Performance evaluation of in vitro diagnostic medical devices |
| BS EN 4590:2005 | Aerospace series. Retainers, spring, sheet metal, for self-locking barrel nuts, in corrosion resisting steel, passivated |
| BS EN 12094-6:2006 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for non-electrical disable devices |
| BS EN ISO 16104:2003 | Packaging. Transport packaging for dangerous goods. Test methods |
| ISO 7218:2007 | Microbiology of food and animal feeding stuffs — General requirements and guidance for microbiological examinations |
| IEC 61189-6:2006 | Test methods for electrical materials, interconnection structures and assemblies - Part 6: Test methods for materials used in manufacturing electronic assemblies |
| UNE-EN 13602:2014 | Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors |
| BS EN 13481-7:2012 | Railway applications. Track. Performance requirements for fastening systems Special fastening systems for switches and crossings and check rails |
| BS EN 13815:2006 | Fibrous gypsum plaster casts. Definitions, requirements and test methods |
| UNE-EN 556-2:2016 | Sterilization of medical devices - Requirements for medical devices to be designated 'STERILE" - Part 2: Requirements for aseptically processed medical devices |
| BS EN 13311-1:2001 | Biotechnology. Performance criteria for vessels General performance criteria |
| BS EN 10284:2000 | Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems |
| UNE-EN 494:2013 | Fibre-cement profiled sheets and fittings - Product specification and test methods |
| BS EN 14209:2017 | Preformed plasterboard cornices. Definitions, requirements and test methods |
| ISO 14727:1998 | Dental implants Prefabricated parts connecting suprastructures to dental implants Contents of technical file |
| BS EN 442-1:2014 | Radiators and convectors Technical specifications and requirements |
| BS EN 1254-5:1998 | Copper and copper alloys. Plumbing fittings Fittings with short ends for capillary brazing to copper tubes |
| BS EN 508-1:2014 | Roofing and cladding products from metal sheet. Specification for self-supporting of steel, aluminium or stainless steel sheet Steel |
| BS EN 12004 : 2007 | ADHESIVES FOR TILES - REQUIREMENTS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
| UNE-EN 10223-8:2014 | Steel wire and wire products for fencing and netting - Part 8: Welded mesh gabion products |
| BS EN 607:2004 | Eaves gutters and fittings made of PVC-U. Definitions, requirements and testing |
| UNE-CEN/TS 16880:2015 | Service excellence - Creating outstanding customer experiences through service excellence |
| BS EN 862:2005 | Packaging. Child resistant packaging. Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products |
| BS EN 12583:2014 | Gas Infrastructure. Compressor stations. Functional requirements |
| BS EN 15275:2015 | Structural adhesives. Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures |
| BS EN 12573-1:2000 | Welded static non-pressurized thermoplastic tanks General principles |
| ISO 14111:1997 | Natural gas — Guidelines to traceability in analysis |
| ISO 26000:2010 | Guidance on social responsibility |
| BS EN 13225:2013 | Precast concrete products. Linear structural elements |
| BS EN ISO 13407:1999 | Human-centred design processes for interactive systems |
| IEC 61190-1-1:2002 | Attachment materials for electronic assembly - Part 1-1: Requirements for soldering fluxes for high-quality interconnections in electronics assembly |
| ISO 20857:2010 | Sterilization of health care products Dry heat Requirements for the development, validation and routine control of a sterilization process for medical devices |
| ISO 22301:2012 | Societal security Business continuity management systems Requirements |
| IEC 62246-2:2007 | Reed contact units - Part 2: Heavy-duty reed switches |
| DIN EN 14991:2007-07 | Precast concrete products - Foundation elements |
| BS EN 14359:2017 | Gas-loaded accumulators for fluid power applications |
| BS EN 13312-4:2001 | Biotechnology. Performance criteria for piping and instrumentation Tubes and pipes |
| ISO/IEC TR 20000-4:2010 | Information technology Service management Part 4: Process reference model |
| ISO 22000:2005 | Food safety management systems Requirements for any organization in the food chain |
| IEC 61207-3:2002 | Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers |
| DIN EN 14904:2015-09 (Draft) | SURFACES FOR SPORTS AREAS - INDOOR SURFACES FOR MULTI-SPORTS USE - SPECIFICATION |
| BS EN 13255:2016 | Geotextiles and geotextile-related products. Characteristics required for use in the construction of canals |
| BS EN ISO/IEC 15426-2:2006 | Information technology. Automatic identification and data capture techniques. Bar code verifier conformance specification Two-dimensional symbols |
| BS EN 15250:2007 | Slow heat release appliances fired by solid fuel. Requirements and test methods |
| IEC 60896-22:2004 | Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements |
| BS EN 12186:2014 | Gas infrastructure. Gas pressure regulating stations for transmission and distribution. Functional requirements |
| ISO 16140:2003 | Microbiology of food and animal feeding stuffs Protocol for the validation of alternative methods |
| UNI EN 197-2 : 2014 | CEMENT - PART 2: CONFORMITY EVALUATION |
| BS EN 9121:2009 | Aerospace series. Quality management systems. Assessment applicable to stockist distributors |
| ISO 16961:2015 | Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel storage tanks |
| ISO 10001:2007 | Quality management Customer satisfaction Guidelines for codes of conduct for organizations |
| BS EN 12462:1998 | Biotechnology. Performance criteria for pumps |
| ISO 3266:2010 | Forged steel eyebolts grade 4 for general lifting purposes |
| BS EN 1330-1:2014 | Non destructive testing. Terminology List of general terms |
| BS EN 15317:2013 | Non-destructive testing. Ultrasonic testing. Characterization and verification of ultrasonic thickness measuring equipment |
| IEC 60794-4-10:2014 | Optical fibre cables - Part 4-10: Family specification - Optical ground wires (OPGW) along electrical power lines |
| ISO 14644-4:2001 | Cleanrooms and associated controlled environments — Part 4: Design, construction and start-up |
| ISO 8230:1997 | Safety requirements for dry-cleaning machines using perchloroethylene |
| IEC 62703:2013 | Expression of performance of fluorometric oxygen analyzers in liquid media |
| UNE-EN 12452:2013 | Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers |
| BS EN 13963:2014 | Jointing materials for gypsum boards. Definitions, requirements and test methods |
| BS EN 13481-8:2006 | Railway applications. Track. Performance requirements for fastening systems Fastening systems for track with heavy axle loads |
| UNE-EN 13963:2014 | Jointing materials for gypsum boards - Definitions, requirements and test methods |
| BS EN 206-1:2000 | Concrete Specification, performance, production and conformity |
| ANSI/AAMI/ISO 15882:2008(R2013) | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS |
| UNE-EN ISO/IEC 17011:2017 | Conformity assessment - Requirements for accreditation bodies accrediting conformity assessment bodies (ISO/IEC 17011:2017) |
| BS EN 15282:2007 | Vitreous and porcelain enamels. Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges |
| BS EN 13252:2016 | Geotextiles and geotextile-related products. Characteristics required for use in drainage systems |
| BS EN 13262 : 2004 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
| BS EN 1293:1999 | General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers |
| BS EN 45510-4-6:1999 | Guide for the procurement of power station equipment. Boiler auxiliaries Flue gas desulfurization (De-SO<sub>x</sub>) plant - Flue gas desulphurization (De-SOx) plant |
| BS EN 54-10:2002 | Fire detection and fire alarm systems Flame detectors. Point detectors |
| BS EN 867-4:2001 | Non-biological systems for use in sterilizers Specification for indicators as an alternative to the Bowie and Dick test for the detection of steam penetration |
| 15/30327712 DC : 0 | BS EN 61191-1 - PRINTED BOARD ASSEMBLIES - PART 1: GENERIC SPECIFICATION - REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES USING SURFACE MOUNT AND RELATED ASSEMBLY TECHNOLOGIES |
| UNE-EN 13160-2:2017 | Leak detection systems - Part 2: Requirements and test/assessment methods for pressure and vacuum systems |
| ISO/IEC 80079-34:2011 | Explosive atmospheres Part 34: Application of quality systems for equipment manufacture |
| BS EN 1806:2006 | Chimneys Clay/ceramic flue blocks for single wall chimneys Requirements and test methods |
| BS EN 2680:2006 | Aerospace series. Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS<sub>2</sub> lubricated. Classification: 900 MPa (at ambient temperature) / 235°C |
| UNE-EN 12566-3:2017 | Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants |
| BS EN 13479:2017 | Welding consumables. General product standard for filler metals and fluxes for fusion welding of metallic materials |
| BS EN 1858 : 2008 | CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS |
| BS EN 773:1999 | General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers |
| BS EN 14236:2007 | Ultrasonic domestic gas meters |
| UNE-EN 1776:2017 | Gas infrastructure - Gas measuring systems - Functional requirements |
| UNE-EN 9103:2015 | Aerospace series - Quality management systems - Variation management of key characteristics |
| UNE-EN ISO 11133:2014 | Microbiology of food, animal feed and water - Preparation, production, storage and performance testing of culture media (ISO 11133:2014) |
| EN ISO 11737-2:2009 | Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process (ISO 11737-2:2009) |
| BS EN 45510-5-2:1998 | Guide for the procurement of power station equipment Gas turbines |
| UNE-EN 13601:2014 | Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
| UNE-EN 1463-1:2010 | Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements |
| UNE-EN 15650:2010 | Ventilation for buildings - Fire dampers |
| ISO 19114:2003 | Geographic information Quality evaluation procedures |
| BS EN ISO 10418:2003 | Petroleum and natural gas industries. Offshore production Installations. Analysis, design, installation and testing of basic surface process safety systems |
| BS EN 1263-1:2014 | Temporary works equipment. Safety nets Safety requirements, test methods |
| UNE-EN 14626:2013 | Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy |
| BS EN 867-1:1997 | Non-biological systems for use in sterilizers General requirements |
| BS EN 1856-2:2009 | Chimneys. Requirements for metal chimneys Metal flue liners and connecting flue pipes |
| BS EN 12451:2012 | Copper and copper alloys. Seamless, round tubes for heat exchangers |
| UNE-EN 60076-1:2013 | Power transformers - Part 1: General |
| IEC 62402:2007 | Obsolescence management - Application guide |
| BS EN ISO 17665-1:2006 | Sterilization of health care products. Moist heat Requirements for the development, validation and routine control of a sterilization process for medical devices |
| BS EN 12566-3 : 2005 | SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 3: PACKAGED AND/OR SITE ASSEMBLED DOMESTIC WASTEWATER TREATMENT PLANTS |
| BS EN 12815 : 2001 | RESIDENTIAL COOKERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| UNE-EN 14901:2015 | Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods |
| BS EN 12050-4:2015 | Wastewater lifting plants for buildings and sites Non-return valves for faecal-free wastewater and wastewater containing faecal matter |
| UNE-EN 13481-4:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 4: Fastening systems for steel sleepers |
| UNE-EN 16351:2016 | Timber structures - Cross laminated timber - Requirements |
| BS EN 10311:2005 | Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids |
| UNE-EN 12952-2:2012 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
| BS EN ISO 14937:2009 | Sterilization of health care products. General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
| BS EN 13674-3 : 2006 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 3: CHECK RAILS |
| BS EN 546-1:2006 | Aluminium and aluminium alloys. Foil Technical conditions for inspection and delivery |
| BS EN 12952-5:2011 | Water-tube boilers and auxiliary installations Workmanship and construction of pressure parts of the boiler |
| EN 61400-22:2011 | Wind turbines - Part 22: Conformity testing and certification |
| ISO 14922-2:1999 | Thermal spraying Quality requirements of thermally sprayed structures Part 2: Comprehensive quality requirements |
| BS EN 1776:2015 | Gas infrastructure. Gas measuring systems. Functional requirements |
| UNI EN 12735-1 : 2010 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR AIR CONDITIONING AND REFRIGERATION - PART 1: TUBES FOR PIPING SYSTEMS |
| IEC 60895:2002 | Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and +/- 600 kV d.c. |
| BS EN 13204 : 2004 | DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
| BS EN 13970:2004 | Flexible sheets for waterproofing. Bitumen water vapour control layers. Definitions and characteristics |
| UNE-EN 534:2007 | Corrugated bitumen sheets - Product specification and test methods |
| UNE-EN 12953-2:2013 | Shell boilers - Part 2: Materials for pressure parts of boilers and accessories |
| BS EN 14350-2:2004 | Child use and care articles. Drinking equipment Chemical requirements and test methods |
| BS EN 45510-5-3:1998 | Guide for the procurement of power station equipment Wind turbines |
| UNE-EN 14342:2013 | Wood flooring and parquet - Characteristics, evaluation of conformity and marking |
| BS EN ISO 15541:2001 | Ships and marine technology. Fire resistance of hose assemblies. Requirements for the test bench |
| UNE-EN ISO 22301:2015 | Societal security - Business continuity management systems - Requirements (ISO 22301:2012) |
| IEC 61131-6:2012 | Programmable controllers - Part 6: Functional safety |
| BS EN 15434 : 2006 | GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS) |
| UNE-EN 12839:2012 | Precast concrete products - Elements for fences |
| BS EN 1857 : 2003 | CHIMNEYS - COMPONENTS - CONCRETE FLUE LINERS |
| BS EN 12385-8:2002 | Steel wire ropes. Safety Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons |
| ISO 10003:2007 | Quality management Customer satisfaction Guidelines for dispute resolution external to organizations |
| UNE-EN 15274:2015 | General purpose adhesives for structural assembly - Requirements and test methods |
| ISO 11140-4:2007 | Sterilization of health care products — Chemical indicators — Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration |
| BS EN ISO 16140 : 2003 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - PROTOCOL FOR THE VALIDATION OF ALTERNATIVE METHODS |
| UNE-EN 13160-3:2017 | Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks |
| BS EN 3868:2004 | Aerospace series. Pipe couplings, loose flanges and seals. Flange connectors, welded, in titanium alloy TI-P64001 |
| BS EN ISO 14727:1999 | Dental implants. Prefabricated parts connecting suprastructures to dental implants. Contents of technical file |
| UNE-EN 9121:2011 | Aerospace series - Quality management systems - Assessment applicable to stockist distributors (based on ISO 9001:2000) |
| UNE-EN 12735-2:2016 | Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment |
| BS EN 1337-6:2004 | Structural bearings Rocker bearings |
| BS EN 14342:2013 | Wood flooring and parquet. Characteristics, evaluation of conformity and marking |
| IEC 61189-5-1:2016 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-1: General test methods for materials and assemblies - Guidance for printed board assemblies |
| BS EN 15102 : 2007 | DECORATIVE WALL COVERINGS - ROLL AND PANEL FORM |
| UNE-EN ISO 13485:2016 | Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2016) |
| IEC 61557-15:2014 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems |
| BS EN 1057 : 2006 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR WATER AND GAS IN SANITARY AND HEATING APPLICATIONS |
| UNE-EN 13407:2016 | Wall-hung urinals - Functional requirements and test methods |
| UNE-EN 12446:2012 | Chimneys - Components - Concrete outer wall elements |
| BS EN 508-3:2008 | Roofing products from metal sheet. Specification for self-supporting products of steel, aluminium or stainless steel sheet Stainless steel |
| UNE-EN 506:2010 | Roofing products of metal sheet - Specification for self-supporting products of copper or zinc sheet |
| UNE-EN 13230-3:2016 | Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers |
| IEC 60746-2:2003 | Expression of performance of electrochemical analyzers - Part 2: pH value |
| ISO/IEC 17024:2012 | Conformity assessment — General requirements for bodies operating certification of persons |
| UNE-EN 13802:2014 | Railway applications - Suspension components - Hydraulic dampers |
| BS EN 13349:2002 | Copper and copper alloys. Pre-insulated copper tubes with solid covering |
| BS EN 331:2015 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
| EN ISO/IEC 80079-34:2011 | Explosive atmospheres - Part 34: Application of quality systems for equipment manufacture (ISO/IEC 80079-34:2011) |
| BS ISO 19372:2015 | Microturbines applications. Safety |
| UNE-EN 15275:2015 | Structural adhesives - Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures |
| BS EN 14662-3:2015 | Ambient air. Standard method for the measurement of benzene concentrations Automated pumped sampling with in situ gas chromatography |
| BS EN 12094-3:2003 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for manual triggering and stop devices |
| BS EN ISO 3834-1:2005 | Quality requirements for fusion welding of metallic materials Criteria for the selection of the appropriate level of quality requirements |
| BS EN 10021:2006 | General technical delivery conditions for steel products |
| 00/565497 DC : DRAFT DEC 2000 | BS IEC 60601-1 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR SAFETY AND ESSENTIAL PERFORMANCE |
| UNE-EN 14081-1:2016 | Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements |
| UNE-EN 13252:2017 | Geotextiles and geotextile-related products - Characteristics required for use in drainage systems |
| UNE-EN ISO 11137-1:2015 | Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006, including Amd 1:2013) |
| EN 12735-1:2016 | Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems |
| BS EN 14409-1:2004 | Plastics piping systems for renovation of underground water supply networks General |
| I.S. EN 197-2:2014 | CEMENT - PART 2: CONFORMITY EVALUATION |
| ISO/IEC 17065:2012 | Conformity assessment — Requirements for bodies certifying products, processes and services |
| ISO 17665-1:2006 | Sterilization of health care products — Moist heat — Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices |
| BS EN 14420-1:2013 | Hose fittings with clamp units Requirements, types of fixing and connection, designation and testing |
| BS EN 14188-3 : 2005 | JOINT FILLERS AND SEALANTS - PART 3: SPECIFICATIONS FOR PREFORMED JOINT SEALS |
| 11/30255124 DC : 0 | BS EN 61191-1 - PRINTED BOARD ASSEMBLIES - PART 1: GENERIC SPECIFICATION - REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES USING SURFACE MOUNT AND RELATED ASSEMBLY TECHNOLOGIES |
| ISO 10380:2012 | Pipework — Corrugated metal hoses and hose assemblies |
| BS EN 13237:2012 | Potentially explosive atmospheres. Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
| UNE-EN 14195:2015 | Metal framing components for gypsum board systems - Definitions, requirements and test methods |
| ISO/IEC 20000-3:2012 | Information technology Service management Part 3: Guidance on scope definition and applicability of ISO/IEC 20000-1 |
| ISO/TS 14907-1:2015 | Electronic fee collection Test procedures for user and fixed equipment Part 1: Description of test procedures |
| IEC 61020-1:2009 | Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification |
| BS EN 12094-4:2004 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for container valve assemblies and their actuators |
| BS EN 9200:2004 | Programme management. Guidelines for project management specification |
| BS EN 12781:2001 | Wallcoverings. Specification for cork panels |
| BS EN 13257:2016 | Geotextiles and geotextile-related products. Characteristics required for use in solid waste disposals |
| BS EN 12569:1999 | Industrial valves. Valves for chemical and petrochemical process industry. Requirements and tests |
| ISO 14922-3:1999 | Thermal spraying Quality requirements of thermally sprayed structures Part 3: Standard quality requirements |
| UNE-EN 13254:2017 | Geotextiles and geotextile-related products - Characteristics required for the use in the construction of reservoirs and dams |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| IEC 61189-5-3:2015 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-3: General test methods for materials and assemblies - Soldering paste for printed board assemblies |
| ISO 15493:2003 | Plastics piping systems for industrial applications Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) Specifications for components and the system Metric series |
| ISO 3691-6:2013 | Industrial trucks Safety requirements and verification Part 6: Burden and personnel carriers |
| IEC 62309:2004 | Dependability of products containing reused parts - Requirements for functionality and tests |
| BS EN 1065:1999 | Adjustable telescopic steel props. Product specifications, design and assessment by calculation and tests |
| BS EN 15161:2006 | Water conditioning equipment inside buildings. Installation, operation, maintenance and repair |
| ISO 14557:2002 | Fire-fighting hoses Rubber and plastics suction hoses and hose assemblies |
| BS EN 45510-8-1:1998 | Guide for the procurement of power station equipment Control and instrumentation |
| UNE-EN 13255:2017 | Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals |
| IEC 61014:2003 | Programmes for reliability growth |
| ISO 19600:2014 | Compliance management systems Guidelines |
| IEC 60966-1:1999 | Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods |
| UNE-EN 13771-1:2017 | Compressors and condensing units for refrigeration - Performance testing and test methods - Part 1: Refrigerant compressors |
| UNE-EN 14625:2013 | Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry |
| UNE-EN 12566-1:2017 | Small wastewater treatment systems for up to 50 PT - Part 1: Prefabricated septic tanks |
| IEC 61069-1:2016 | Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 1: Terminology and basic concepts |
| BS EN 12167:2011 | Copper and copper alloys. Profiles and bars for general purposes |
| BS EN 13411-7 : 2006 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET |
| BS EN 54-5 : 2017 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 5: HEAT DETECTORS - POINT HEAT DETECTORS |
| UNE-EN 13265:2017 | Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects |
| BS EN 13265:2016 | Geotextiles and geotextile-related products. Characteristics required for use in liquid waste containment projects |
| ISO 13053-2:2011 | Quantitative methods in process improvement — Six Sigma — Part 2: Tools and techniques |
| ISO 15743:2008 | Ergonomics of the thermal environment Cold workplaces Risk assessment and management |
| ISO/IEC TS 17021-3:2013 | Conformity assessment Requirements for bodies providing audit and certification of management systems Part 3: Competence requirements for auditing and certification of quality management systems |
| ISO 14534:2011 | Ophthalmic optics Contact lenses and contact lens care products Fundamental requirements |
| IEC 61192-1:2003 | Workmanship requirements for soldered electronic assemblies - Part 1: General |
| UNE-EN 14125:2013 | Thermoplastic and flexible metal pipework for underground installation at petrol filling stations |
| UNE-EN 12583:2014 | Gas Infrastructure - Compressor stations - Functional requirements |
| IEC 61162-402:2005 | Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 402: Multiple talkers and multiple listeners - Ship systems interconnection - Documentation and test requirements |
| ISO/IEC 17020:2012 | Conformity assessment — Requirements for the operation of various types of bodies performing inspection |
| IEC 61192-5:2007 | Workmanship requirements for soldered electronic assemblies - Part 5: Rework, modification and repair of soldered electronic assemblies |
| CEN/TR 14245:2014 | Cement - Guidelines for the application of EN 197-2 Conformity Evaluation |
| IEC 61478:2001+AMD1:2003 CSV | Live working - Ladders of insulating material |
| ISO/IEC 15504-6:2013 | Information technology Process assessment Part 6: An exemplar system life cycle process assessment model |
| BS EN 14625:2012 | Ambient air. Standard method for the measurement of the concentration of ozone by ultraviolet photometry |
| UNE-ISO 13053-2:2012 | Quantitative methods in process improvement -- Six Sigma -- Part 2: Tools and techniques |
| BS EN 12094-11:2003 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for mechanical weighing devices |
| UNE-EN 508-2:2010 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium |
| I.S. EN 12735-1:2016 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR AIR CONDITIONING AND REFRIGERATION - PART 1: TUBES FOR PIPING SYSTEMS |
| BS EN 54-2 : 1998 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT |
| ISO/TS 14253-2:1999 | Geometrical Product Specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
| IEC 60076-1:2011 | Power transformers - Part 1: General |
| DIN EN 54-12:2015-10 | Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam |
| UNE-EN 12326-1:2015 | Slate and stone for discontinuous roofing and external cladding - Part 1: Specifications for slate and carbonate slate |
| I.S. EN ISO 10993-1:2009+AC:2010 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS (ISO 10993-1:2009) |
| BS EN 4415:2006 | Aerospace series. Non-metallic materials. Textiles. Narrow woven fabrics. Technical specification |
| DIN EN 15434:2010-07 | Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) (includes Amendment A1:2010) |
| UNE-EN 14190:2014 | Gypsum board products from reprocessing - Definitions, requirements and test methods |
| BS EN 13256:2016 | Geotextiles and geotextile-related products. Characteristics required for use in the construction of tunnels and underground structures |
| ISO 9000-3:1997 | Quality management and quality assurance standards Part 3: Guidelines for the application of ISO 9001:1994 to the development, supply, installation and maintenance of computer software |
| ISO 11980:2012 | Ophthalmic optics — Contact lenses and contact lens care products — Guidance for clinical investigations |
| ISO 13127:2012 | Packaging — Child resistant packaging — Mechanical test methods for reclosable child resistant packaging systems |
| BS EN 1337-3:2005 | Structural bearings Elastomeric bearings |
| BS EN 13240 : 2001 | ROOMHEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| IEC 61400-1:2005+AMD1:2010 CSV | Wind turbines - Part 1: Design requirements |
| ISO 19902:2007 | Petroleum and natural gas industries Fixed steel offshore structures |
| BS EN 1677-5 : 2001 | COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4 |
| BS EN 14783:2013 | Fully supported metal sheet and strip for roofing, external cladding and internal lining. Product specification and requirements |
| ISO 15189:2012 | Medical laboratories — Requirements for quality and competence |
| BS EN 15189:2006 | Ductile iron pipes, fittings and accessories. External polyurethane coating for pipes. Requirements and test methods |
| ISO 11442:2006 | Technical product documentation Document management |
| ISO 20121:2012 | Event sustainability management systems — Requirements with guidance for use |
| IEC 61207-1:2010 | Expression of performance of gas analyzers - Part 1: General |
| DIN EN 15069:2010-07 | Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
| DIN EN 14783:2013-07 | FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
| BS EN 13981-2:2004 | Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery Plates and sheets |
| BS EN 14351-1 : 2006 | WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 1: WINDOWS AND EXTERNAL PEDESTRIAN DOORSETS |
| UNE-EN 12101-2:2004 | Smoke and heat control systems - Part 2: Specification for natural smoke and heat exhaust ventilators |
| BS EN 13084-7:2012 | Free-standing chimneys Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners |
| BS EN 13230-3:2016 | Railway applications. Track. Concrete sleepers and bearers Twin-block reinforced sleepers |
| IEC 61400-3:2009 | Wind turbines - Part 3: Design requirements for offshore wind turbines |
| BS EN ISO 22000:2005 | Food safety management systems. Requirements for any organization in the food chain |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| IEC 61192-2:2003 | Workmanship requirements for soldered electronic assemblies - Part 2: Surface-mount assemblies |
| ISO 16426:2002 | Fasteners — Quality assurance system |
| BS ISO 19859:2016 | Gas turbine applications. Requirements for power generation |
| BS EN 12259-5:2002 | Fixed firefighting systems. Components for sprinkler and water spray systems Water flow detectors |
| UNE-EN ISO 14534:2015 | Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2011) |
| UNE-EN 16914:2017 | Aluminium and aluminium alloys - Hot-rolled armour plates in weldable aluminium alloy - Technical delivery conditions |
| BS EN 12952-6:2011 | Water-tube boilers and auxiliary installations Inspection during construction; documentation and marking of pressure parts of the boiler |
| BS EN 4496:2005 | Aerospace series. Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating. Classification: 1100 MPa (at ambient temperature) / 315 °C |
| BS EN 4591:2005 | Aerospace series. Nuts, barrel, self-locking, floating, self-aligning,in heat resisting nickel base alloy, MoS<sub>2</sub> lubricated. Classification: 15 50 MPa (at ambient temperature) / 315°C |
| BS EN 508-2:2008 | Roofing products from metal sheet. Specification for self supporting products of steel, aluminium or stainless steel sheet Aluminium |
| BS EN 14372:2004 | Child use and care articles. Cutlery and feeding utensils. Safety requirements and tests |
| UNE-EN 14211:2013 | Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence |
| UNE-EN 12209:2017 | Building hardware - Mechanically operated locks and locking plates - Requirements and test methods |
| IEC 61160:2005 | Design review |
| BS EN 13813:2002 | Screed material and floor screeds. Screed material. Properties and requirements |
| BS EN 45012:1998 | General requirements for bodies operating assessment and certification/registration of quality systems |
| BS EN 14396:2004 | Fixed ladders for manholes |
| ISO/IEC 17021:2011 | Conformity assessment Requirements for bodies providing audit and certification of management systems |
| BS EN 12094-10:2003 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for pressure gauges and pressure switches |
| UNE-EN 488:2012 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| UNE-EN 13600:2014 | Copper and copper alloys - Seamless copper tubes for electrical purposes |
| BS EN 13279-1:2008 | Gypsum binders and gypsum plasters Definitions and requirements |
| UNE-EN ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017) |
| ISO/IEC 15504-3:2004 | Information technology Process assessment Part 3: Guidance on performing an assessment |
| BS EN 13254:2016 | Geotextiles and geotextile-related products. Characteristics required for the use in the construction of reservoirs and dams |
| BS EN 14620-1:2006 | Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0°C and -165°C General |
| 09/30207398 DC : 0 | BS ISO 7240-3 - FIRE DETECTION AND ALARM SYSTEMS - PART 3: AUDIBLE ALARM DEVICES |
| CEI EN 50129 : 2004 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SAFETY RELATED ELECTRONIC SYSTEMS FOR SIGNALLING |
| IEC 61811-50:2002 | Electromechanical all-or-nothing relays - Part 50: Sectional specification - Electromechanical all-or-nothing telecom relays of assessed quality |
| UNE-EN 14695:2010 | Flexible sheets for waterproofing - Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics |
| BS EN 14321-2:2005 | Glass in building. Thermally toughened alkaline earth silicate safety glass Evaluation of conformity/Product standard |
| ISO 13408-3:2006 | Aseptic processing of health care products Part 3: Lyophilization |
| ISO 11608-1:2014 | Needle-based injection systems for medical use Requirements and test methods Part 1: Needle-based injection systems |
| ISO/IEC 20000-2:2012 | Information technology Service management Part 2: Guidance on the application of service management systems |
| UNE-EN ISO 14937:2010 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
| ISO 23936-1:2009 | Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 1: Thermoplastics |
| BS EN 54-11:2001 | Fire detection and fire alarm systems Manual call points |
| IEC TR 63084:2017 | Nuclear power plants - Instrumentation and control important to safety - Platform qualification for systems important to safety |
| BS EN 12094-9:2003 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for special fire detectors |
| BS EN 13015 : 2001 | MAINTENANCE FOR LIFTS AND ESCALATORS - RULES FOR MAINTENANCE INSTRUCTIONS |
| UNE-EN 14516:2017 | Baths for domestic purposes |
| UNE-ISO 18091:2015 | Quality management systems -- Guidelines for the application of ISO 9001:2008 in local government |
| BS EN 12094-1:2003 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for electrical automatic control and delay devices |
| BS EN 45510-6-1:1998 | Guide for the procurement of power station equipment. Turbine auxiliaries Deaerators |
| BS EN 14250:2010 | Timber structures. Product requirements for prefabricated structural members assembled with punched metal plate fasteners |
| UNE-EN 14212:2013 | Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence |
| BS EN 1051-2:2007 | Glass in building. Glass blocks and glass pavers Evaluation of conformity/Product standard |
| UNE EN 16309 : 0 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
| BS EN 14125:2013 | Thermoplastic and flexible metal pipework for underground installation at petrol filling stations |
| BS EN 12109:1999 | Vacuum drainage systems inside buildings |
| BS EN 14889-1:2006 | Fibres for concrete Steel fibres. Definitions, specifications and conformity |
| UNE-EN ISO 50001:2011 | Energy management systems - Requirements with guidance for use (ISO 50001:2011) |
| BS EN 12951:2004 | Prefabricated accessories for roofing. Permanently fixed roof ladders. Product specification and test methods |
| BS EN 4416:2006 | Aerospace series. Non-metallic materials. Textiles. Wide woven fabrics. Technical specification |
| UNE-EN 13256:2017 | Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures |
| UNE-EN 12420:2015 | Copper and copper alloys - Forgings |
| BS EN 54-20:2006 | Fire detection and fire alarm systems Aspirating smoke detectors |
| DIN EN 14909:2012-07 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF COURSES - DEFINITIONS AND CHARACTERISTICS |
| UNE-EN 295-2:2013 | Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of conformity and sampling |
| UNE-EN 694:2015 | Fire-fighting hoses - Semi-rigid hoses for fixed systems |
| UNE-EN 12158-1:2001 | Builders hoists for goods. Part 1: Hoists with accessible platforms. |
| BS EN 13599:2014 | Copper and copper alloys. Copper plate, sheet and strip for electrical purposes |
| BS EN 45510-4-3:1999 | Guide for the procurement of power station equipment. Boiler auxiliaries Draught plant - Draught plant |
| IEC 60746-1:2003 | Expression of performance of electrochemical analyzers - Part 1: General |
| ISO/TS 13972:2015 | Health informatics Detailed clinical models, characteristics and processes |
| DIN EN 15088:2016-09 (Draft) | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery; German and English version prEN 15088:2016 |
| UNE-EN 13984:2013 | Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics |
| BS EN 1947:2014 | Fire-fighting hoses. Semi-rigid delivery hoses and hose assemblies for pumps and vehicles |
| BS EN 13601:2013 | Copper and copper alloys. Copper rod, bar and wire for general electrical purposes |
| ISO 2919:2012 | Radiological protection — Sealed radioactive sources — General requirements and classification |
| ISO/IEC 17040:2005 | Conformity assessment — General requirements for peer assessment of conformity assessment bodies and accreditation bodies |
| BS EN ISO 10451:2010 | Dentistry. Contents of technical file for dental implant systems |
| BS EN 12452:2012 | Copper and copper alloys. Rolled, finned, seamless tubes for heat exchangers |
| DIN EN 54-20:2009-02 | Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors (includes Amendment AC:2008) |
| UNE-EN 1594:2014 | Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements |
| BS EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods |
| UNE-EN 520:2005 | Gypsum plasterboards - Definitions, requirements and test methods |
| UNE-EN 13693:2005 | Precast concrete products - Special roof elements |
| UNE-EN 13956:2013 | Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics |
| ISO 19900:2013 | Petroleum and natural gas industries General requirements for offshore structures |
| BS EN 2596:2006 | Aerospace series. Washers, lock, with radial serrations in corrosion resisting steel, cadmium plated for flight control rods. Dimensions |
| BS EN 488:2015 | District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| PD IEC/TS 62668-2:2016 | Process management for avionics. Counterfeit prevention Managing electronic components from non-franchised sources |
| BS EN 14422:2013 | Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses |
| UNE-EN 1858:2011 | Chimneys - Components - Concrete flue blocks |
| IEC 61189-2:2006 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures |
| IEC 60896-21:2004 | Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test |
| BS EN 14065:2016 | Textiles. Laundry processed textiles. Biocontamination control system |
| UNE-EN 13250:2017 | Geotextiles and geotextile-related products - Characteristics required for use in the construction of railways |
| BS EN 1652:1998 | Copper and copper alloys. Plate, sheet, strip and circles for general purposes |
| UNE-EN 13808:2013 | Bitumen and bituminous binders - Framework for specifying cationic bituminous emulsions |
| BS EN 12385-9:2002 | Steel wire ropes. Safety Locked coil carrying ropes for cableway installations designed to carry persons |
| BS EN 14246:2006 | Gypsum elements for suspended ceilings. Definitions, requirements and test methods |
| BS EN 9111:2005 | Aerospace series. Quality management systems. Assessment applicable to maintenance organizations |
| BS EN 1:1998 | Flued oil stoves with vaporizing burners |
| UNE-EN 13084-7:2013 | Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners |
| UNE-EN 1856-2:2010 | Chimneys - Requirements for metal chimneys - Part 2: Metal flue liners and connecting flue pipes |
| UNE-EN 13850:2013 | Postal Services - Quality of Services - Measurement of the transit time of end-to-end services for single piece priority mail and first class mail |
| UNE-EN 13262:2005 | Railway applications - Wheelsets and bogies - Wheels - Product requirement. |
| ISO/IEC TR 20000-5:2013 | Information technology Service management Part 5: Exemplar implementation plan for ISO/IEC 20000-1 |
| BS EN 15088:2005 | Aluminium and aluminium alloys. Structural products for construction works. Technical conditions for inspection and delivery |
| DIN EN 54-18:2006-03 | Fire detection and fire alarm systems - Part 18: Input/output devices |
| UNE-EN 14422:2014 | Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses |
| ISO 13628-15:2011 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 15: Subsea structures and manifolds |
| I.S. EN 13230-2:2016 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 2: PRESTRESSED MONOBLOCK SLEEPERS |
| UNE-EN 1947:2015 | Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles |
| BS EN 14424:2013 | Hose fittings with screwed ferrules |
| UNE-EN 13481-2:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers |
| BS EN 682:2002 | Elastomeric seals. Materials requirements for seals used in pipes and fi ttings carrying gas and hydrocarbon fluids |
| UNE-EN 14540:2015 | Fire-fighting hoses - Non-percolating layflat hoses for fixed systems |
| BS EN 13602:2013 | Copper and copper alloys. Drawn, round copper wire for the manufacture of electrical conductors |
| UNE-EN 1013:2013 | Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods |
| IEC 60079-19:2010+AMD1:2015 CSV | Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation |
| BS EN ISO 15189:2012 | Medical laboratories. Requirements for quality and competence |
| BS EN 12166:2011 | Copper and copper alloys. Wire for general purposes |
| BS EN 14532-3:2004 | Welding consumables. Test methods and quality requirements Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys |
| 12/30248102 DC : 0 | BS EN 14604 - SMOKE ALARM DEVICES |
| BS EN ISO 14554-1:2013 | Quality requirements for welding. Resistance welding of metallic materials Comprehensive quality requirements |
| IEC 61174:2015 | Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information system (ECDIS) - Operational and performance requirements, methods of testing and required test results |
| BS EN 12164:2011 | Copper and copper alloys. Rod for free machining purposes |
| BS EN 14785:2006 | Residential space heating appliances fired by wood pellets. Requirements and test methods |
| BS EN 1748-1-2:2004 | Glass in building. Special basic products Borosilicate glasses - Evaluation of conformity. Product standard |
| BS EN ISO 13849-1:2015 | Safety of machinery. Safety-related parts of control systems General principles for design |
| PD IEC/TS 62686-1:2015 | Process management for avionics. Electronic components for aerospace, defence and high performance (ADHP) applications General requirements for high reliability integrated circuits and discrete semiconductors |
| UNE-EN 13251:2017 | Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures |
| BS EN 15342:2007 | Plastics. Recycled plastics. Characterization of polystyrene (PS) recyclates |
| UNE-EN 12050-1:2015 | Wastewater lifting plants for buildings and sites - Part 1: Lifting plants for wastewater containing faecal matter |
| BS EN 4074:2009 | Aerospace series. Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambient temperature)/425°C |
| ISO 16104:2003 | Packaging — Transport packaging for dangerous goods — Test methods |
| ISO/IEC 19796-1:2005 | Information technology Learning, education and training Quality management, assurance and metrics Part 1: General approach |
| BS EN 45510-6-3:1998 | Guide for the procurement of power station equipment. Turbine auxiliaries Condenser plant |
| BS EN 13481-2 : 2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 2: FASTENING SYSTEMS FOR CONCRETE SLEEPERS |
| UNE-EN 13348:2016 | Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum |
| CEN/TS 1401-2:2012 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for assessment of conformity |
| UNE-EN 13172:2012 | Thermal insulation products - Evaluation of conformity |
| BS EN 15015:2007 | Plastics piping systems. Systems for hot and cold water not intended for human consumption. Performance characteristics for pipes, fittings and their joints |
| BS EN ISO 15883-1 : 2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006) |
| ISO 10451:2010 | Dentistry — Contents of technical file for dental implant systems |
| BS EN 13604:2013 | Copper and copper alloys. Semiconductor devices, electronic and vacuum products made from high conductivity copper |
| UNE-ISO 55001:2015 | Asset management. Management systems. Requirements. |
| BS EN 516:2006 | Prefabricated accessories for roofing. Installations for roof access. Walkways, treads and steps |
| UNE-EN 12368:2015 | Traffic control equipment - Signal heads |
| UNE-EN 15827:2011 | Railway applications - Requirements for bogies and running gears |
| IEC 61191-3:2017 | Printed board assemblies - Part 3: Sectional specification - Requirements for through-hole mount soldered assemblies |
| BS EN 9103:2014 | Aerospace series. Quality management systems. Variation management of key characteristics |
| BS EN 13956:2012 | Flexible sheets for waterproofing. Plastic and rubber sheets for roof waterproofing. Definitions and characteristics |
| BS EN ISO 15882:2008 | Sterilization of health care products. Chemical indicators. Guidance for selection, use and interpretation of results |
| BS EN 14688 : 2015 | SANITARY APPLIANCES - WASH BASINS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| IEC 62566:2012 | Nuclear power plants - Instrumentation and control important to safety - Development of HDL-programmed integrated circuits for systems performing category A functions |
| ISO 14031:2013 | Environmental management Environmental performance evaluation Guidelines |
| ISO/IEC 15504-4:2004 | Information technology Process assessment Part 4: Guidance on use for process improvement and process capability determination |
| BS EN 14527 : 2006 | SHOWER TRAYS FOR DOMESTIC PURPOSES |
| BS EN 12195-4:2003 | Load restraint assemblies on road vehicles. Safety Lashing steel wire ropes |
| BS EN 13341 : 2005 | STATIC THERMOPLASTIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED AND ROTATIONALLY MOULDED POLYETHYLENE TANKS AND ROTATIONALLY MOULDED TANKS MADE OF ANIONICALLY POLYMERIZED POLYAMIDE 6 - REQUIREMENTS AND TEST METHODS |
| UNE-EN ISO 13849-1:2016 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| BS EN 14449:2005 | Glass in building. Laminated glass and laminated safety glass. Evaluation of conformity/product standard |
| UNE-EN 448:2017 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| BS EN 12101-1 : 2006 | SMOKE AND HEAT CONTROL SYSTEMS - PART 1: SPECIFICATION FOR SMOKE BARRIERS |
| UNE-EN 862:2016 | Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products |
| ISO/IEC 17021-1:2015 | Conformity assessment Requirements for bodies providing audit and certification of management systems Part 1: Requirements |
| BS EN 12385-6:2004 | Steel wire ropes. Safety Stranded ropes for mine shafts |
| UNE-EN ISO 14031:2015 | Environmental management - Environmental performance evaluation - Guidelines (ISO 14031:2013) |
| BS EN 30993-1:1994 | Biological evaluation of medical devices Guidance on selection of tests |
| BS EN 13876:2002 | Transport. Logistics and services. Goods transport chains. Code of practice for the provision of cargo transport services |
| BS EN 12566-4:2016 | Small wastewater treatment systems for up to 50 PT Septic tanks assembled in situ from prefabricated kits |
| UNE-EN 13986:2006 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| BS EN 12966-3:2005 | Road vertical signs. Variable message traffic signs Factory production control |
| ISO 14344:2010 | Welding consumables — Procurement of filler materials and fluxes |
| IEC 61209:1999 | Maritime navigation and radiocommunication equipment and systems - Integrated bridge systems (IBS) - Operational and performance requirements, methods of testing and required test results |
| BS EN 1317-5 : 2007 | ROAD RESTRAINT SYSTEMS - PART 5: PRODUCT REQUIREMENTS AND EVALUATION OF CONFORMITY FOR VEHICLE RESTRAINT SYSTEMS |
| UNE-EN 14209:2017 | Preformed plasterboard cornices - Definitions, requirements and test methods |
| 09/30204364 DC : 0 | BS EN 6104 - AEROSPACE SERIES - RIVETS, SOLID, IN ALUMINIUM OR ALUMINIUM ALLOY - INCH SERIES - TECHNICAL SPECIFICATION |
| BS EN 14800:2007 | Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels |
| BS EN 12953-2:2012 | Shell boilers Materials for pressure parts of boilers and accessories |
| UNE-EN ISO/IEC 15423:2010 | Information technology - Automatic identification and data capture techniques - Bar code scanner and decoder performance testing (ISO/IEC 15423:2009) |
| BS EN 4691-1:2017 | Aerospace series. Tie rod with integrated bolts Technical specification |
| BS EN 2549:2006 | Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium, anodized, MoS<sub>2</sub> lubricated. Classification: 1100 MPa (at ambient temperature) / 315°C |
| BS EN 1654:1998 | Copper and copper alloys. Strip for springs and connectors |
| BS EN 13981-3:2006 | Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery Castings |
| BS EN 13230-4:2016 | Railway applications. Track. Concrete sleepers and bearers Prestressed bearers for switches and crossings |
| UNE-EN 998-2:2012 | Specification for mortar for masonry - Part 2: Masonry mortar |
| ISO 10012-1:1992 | Quality assurance requirements for measuring equipment Part 1: Metrological confirmation system for measuring equipment |
| DIN EN 15275:2015-06 | STRUCTURAL ADHESIVES - CHARACTERISATION OF ANAEROBIC ADHESIVES FOR CO-AXIAL METALLIC ASSEMBLY IN BUILDING AND CIVIL ENGINEERING STRUCTURES |
| DIN EN 15015:2014-06 (Draft) | PLASTICS PIPING SYSTEMS - SYSTEMS FOR HOT AND COLD WATER NOT INTENDED FOR HUMAN CONSUMPTION - PERFORMANCE CHARACTERISTICS FOR PIPES, FITTINGS AND THEIR JOINTS |
| BS EN 12897:2016 | Water supply. Specification for indirectly heated unvented (closed) storage water heaters |
| BS EN 1748-2-2:2004 | Glass in building. Special basic products Glass ceramics - Evaluation of conformity/Product standard |
| BS EN 13298:2003 | Railway applications. Suspension components. Helical suspension springs, steel |
| BS EN ISO 13485:2016 | Medical devices. Quality management systems. Requirements for regulatory purposes |
| UNE-EN 14424:2014 | Hose fittings with screwed ferrules |
| BS EN 12507:2005 | Transportation services. Guidance notes on the application of EN ISO 9001:2000 to the road transportation, storage, distribution and railway goods industries |
| BS EN ISO 19900:2013 | Petroleum and natural gas industries. General requirements for offshore structures |
| BS EN 1917:2002 | Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced |
| DIN EN 15250:2007-06 | Slow heat release appliances fired by solid fuel - Requirements and test methods |
| ISO 10931:2005 | Plastics piping systems for industrial applications Poly(vinylidene fluoride) (PVDF) Specifications for components and the system |
| BS EN 9104:2006 | Aerospace series. Quality management systems. Requirements for aerospace quality management system certification/ registrations programs |
| BS EN 1804-1 : 2001 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 1: SUPPORT UNITS AND GENERAL REQUIREMENTS |
| EN 45510-2-9 : 2008 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-9: ELECTRICAL EQUIPMENT - CABLING SYSTEMS |
| EN 61811-1:2015 | Electromechanical telecom elementary relays of assessed quality - Part 1: Generic specification and blank detail specification |
| DIN EN 10224:2005-12 | NON-ALLOY STEEL TUBES AND FITTINGS FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS |
| EN 61511-1:2017/A1:2017 | FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND APPLICATION PROGRAMMING REQUIREMENTS |
| EN 60794-4-10:2014 | Optical fibre cables - Part 4-10: Family specification - Optical ground wires (OPGW) along electrical power lines |
| CEN/TS 14541:2013 | Plastics pipes and fittings - Characteristics for utilisation of non-virgin PVC-U, PP and PE materials |
| EN 14817:2006 | Railway applications - Suspension components - Air spring control elements |
| EN 30-1-2:2012 | Domestic cooking appliances burning gas - Safety - Part 1-2: Appliances having forced-convection ovens and/or grills |
| EN 15342:2007 | Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates |
| EN 534:2006+A1:2010 | Corrugated bitumen sheets - Product specification and test methods |
| EN ISO 10380:2012 | Pipework - Corrugated metal hoses and hose assemblies (ISO 10380:2012) |
| EN 9121:2009 | Aerospace series - Quality management systems - Assessment applicable to stockist distributors (based on ISO 9001:2000) |
| EN 4135:2009 | Aerospace series - Bolts, normal bi-hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| EN 54-26:2015 | Fire detection and fire alarm systems - Part 26: Carbon monoxide detectors - Point detectors |
| EN 14350-1:2004 | Child use and care articles - Drinking equipment - Part 1: General and mechanical requirements and tests |
| EN 4075:2008 | Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in corrosion resisting steel, passivated - Classification: 490 MPa (at ambient temperature) / 425 °C |
| EN 862:2016 | Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products |
| EN 15069:2008 | Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
| EN 4494:2006 | Aerospace series - Rings, split, in stainless steel |
| EN 14055:2010+A1:2015 | WC and urinal flushing cisterns |
| EN 15286:2013 | Agglomerated stone - Slabs and tiles for wall finishes (internal and external) |
| EN ISO 28765:2016 | Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges (ISO 28765:2016) |
| EN 4591:2005 | Aerospace series - Nuts, barrel, self-locking, floating, self-aligning, in heat resisting nickel base alloy, MoS2 lubricated - Classification: 1 550 MPa (at ambient temperature) / 315 °C |
| EN 3712:2007 | Aerospace series - Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 235 °C |
| EN 74-2:2008 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures |
| EN 998-1:2016 | Specification for mortar for masonry - Part 1: Rendering and plastering mortar |
| EN 4495:2006 | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| EN 16497-2:2017 | Chimneys - Concrete System Chimneys - Part 2: Balanced flue applications |
| EN 14592:2008+A1:2012 | Timber structures - Dowel-type fasteners - Requirements |
| EN 14587-2:2009 | Railway applications - Track - Flash butt welding of rails - Part 2: New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a fixed plant |
| EN 13981-2:2004 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 2: Plates and sheets |
| EN 2754:2006 | Aerospace series - Nuts, anchor, self locking, two lug, floating with counterbore - Classification: 1 100 MPa/235 °C |
| EN 54-21:2006 | Fire detection and fire alarm systems - Part 21: Alarm transmission and fault warning routing equipment |
| EN 15266:2007 | Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar |
| EN 13950:2014 | Gypsum board thermal/acoustic insulation composite panels - Definitions, requirements and test methods |
| EN 14409-1:2004 | Plastics piping systems for renovation of underground water supply networks - Part 1: General |
| EN 14188-1:2004 | Joint fillers and sealants - Part 1: Specifications for hot applied sealants |
| EN 14359:2017 | Gas-loaded accumulators for fluid power applications |
| EN 14399-1:2015 | High-strength structural bolting assemblies for preloading - Part 1: General requirements |
| EN 14422:2013 | Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses |
| EN 14188-3:2006 | Joint fillers and sealants - Part 3: Specifications for preformed joint seals |
| EN 14628:2005 | Ductile iron pipes, fittings and accessories - External polyethylene coating for pipes - Requirements and test methods |
| EN 3626:2006 | Aerospace series - Nuts, hexagon, self-locking in steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/235 °C |
| EN 54-23:2010 | Fire detection and fire alarm systems - Part 23: Fire alarm devices - Visual alarm devices |
| EN 16271:2012 | Value management - Functional expression of the need and functional performance specification - Requirements for expressing and validating the need to be satisfied within the process of purchasing or obtaining a product |
| EN 14785:2006 | Residential space heating appliances fired by wood pellets - Requirements and test methods |
| EN 14991:2007 | Precast concrete products - Foundation elements |
| EN 2786:2008 | Aerospace series - Electrolytic silver plating of fasteners |
| EN 14372:2004 | Child use and care articles - Cutlery and feeding utensils - Safety requirements and tests |
| EN 15014:2007 | Plastics piping systems - Buried and above ground systems for water and other fluids under pressure - Performance characteristics for pipes, fittings and their joints |
| EN 450-2:2005 | Fly ash for concrete - Part 2: Conformity evaluation |
| EN 15267-2:2009 | Air quality - Certification of automated measuring systems - Part 2: Initial assessment of the AMS manufacturer’s quality management system and post certification surveillance for the manufacturing process |
| EN ISO 10012:2003 | Measurement management systems - Requirements for measurement processes and measuring equipment (ISO 10012:2003) |
| EN 15530:2008 | Aluminium and aluminium alloys - Environmental aspects of aluminium products - General guidelines for their inclusion in standards |
| EN 13984:2013 | Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics |
| EN 16887:2017 | Leather - Environmental footprint - Product Category Rules (PCR) - Carbon footprints |
| EN 1677-5:2001+A1:2008 | Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4 |
| EN 14190:2014 | Gypsum board products from reprocessing - Definitions, requirements and test methods |
| EN 15250:2007 | Slow heat release appliances fired by solid fuel - Requirements and test methods |
| EN 4166:2004 | Aerospace series - Clips, spring tension, three parts - PTFE bushes |
| EN 15189:2006 | Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods |
| EN 16114:2011 | Management consultancy services |
| EN 45510-4-4:2002 | Guide for procurement of power station equipment - Part 4-4: Boiler auxiliaries - Fuel preparation equipment |
| EN 13599:2014 | Copper and copper alloys - Copper plate, sheet and strip for electrical purposes |
| EN 14904:2006 | Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification |
| EN 508-2:2008 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium |
| EN ISO 11140-4:2007 | Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration (ISO 11140-4:2007) |
| EN 14420-1:2013 | Hose fittings with clamp units - Part 1: Requirements, types of fixing and connection, designation and testing |
| EN 1504-8:2016 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 8: Quality control and Assessment and verification of the constancy of performance (AVCP) |
| EN 1790:2013 | Road marking materials - Preformed road markings |
| EN 4498:2005 | Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating - Classification: 1 550 MPa (at ambient temperature) / 315 °C |
| EN ISO 6789-2:2017 | Assembly tools for screws and nuts - Hand torque tools - Part 2: Requirements for calibration and determination of measurement uncertainty (ISO 6789-2:2017) |
| EN ISO 11135-1:2007 | Sterilization of health care products - Ethylene oxide - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11135-1:2007) |
| EN 1758:1997 | Copper and copper alloys - Strip for lead frames |
| EN 13859-1:2014 | Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing |
| EN 16153:2013+A1:2015 | Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods |
| EN ISO 12679:2015 | Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011) |
| EN 546-1:2006 | Aluminium and aluminium alloys - Foil - Part 1: Technical conditions for inspection and delivery |
| EN 16034:2014 | Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics |
| EN 4416:2006 | Aerospace series - Non-metallic materials - Textiles - Wide woven fabrics - Technical specification |
| EN 4415:2006 | Aerospace series - Non-metallic materials - Textiles - Narrow woven fabrics - Technical specification |
| EN 14963:2006 | Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods |
| EN 14616:2004 | Thermal spraying - Recommendations for thermal spraying |
| EN 13859-2:2014 | Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls |
| EN 13658-2:2005 | Metal lath and beads - Definitions, requirements and test methods - Part 2: External rendering |
| EN 1492-4:2004+A1:2008 | Textile slings - Safety - Part 4: Lifting slings for general service made from natural and man-made fibre ropes |
| EN 14909:2012 | Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics |
| EN 13981-4:2006 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 4: Forgings |
| EN ISO 2919:2014 | Radiological protection - Sealed radioactive sources - General requirements and classification (ISO 2919:2012) |
| EN 54-28:2016 | Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors |
| EN 14137:2003 | Postal services - Quality of service - Measurement of loss of registered mail and other types of postal service using a track and trace system |
| EN 15221-5:2011 | Facility Management - Part 5: Guidance on Facility Management processes |
| EN 14178-2:2004 | Glass in building - Basic alkaline earth silicate glass products - Part 2: Evaluation of conformity/Product standard |
| EN 520:2004+A1:2009 | Gypsum plasterboards - Definitions, requirements and test methods |
| EN 4132:2009 | Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C |
| EN 15088:2005 | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery |
| EN ISO 13408-1:2015 | Aseptic processing of health care products - Part 1: General requirements (ISO 13408-1:2008, including Amd 1:2013) |
| EN 15964:2011 | Breath alcohol test devices other than single use devices - Requirements and test methods |
| EN ISO 11442:2006 | Technical product documentation - Document management (ISO 11442:2006) |
| EN 2596:2006 | Aerospace series - Washers, lock, with radial serrations in corrosion resisting steel, cadmium plated for flight control rods - Dimensions |
| EN 13981-3:2006 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 3: Castings |
| EN 14967:2006 | Flexible sheets for waterproofing - Bitumen damp proof courses - Definitions and characteristics |
| IPC J STD 004 : B | REQUIREMENTS FOR SOLDERING FLUXES |
| EN 15347:2007 | Plastics - Recycled Plastics - Characterisation of plastics wastes |
| EN 15683-2:2013 | Glass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part 2: Evaluation of conformity/Product standard |
| EN 14989-1:2007 | Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 1: Vertical air/flue terminals for C6-type appliances |
| EN 14814:2016 | Adhesives for thermoplastic piping systems for fluids under pressure - Specifications |
| EN 54-3:2014 | Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders |
| EN ISO 16104:2003 | Packaging - Transport packaging for dangerous goods - Test methods (ISO 16104:2003) |
| EN 14321-2:2005 | Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard |
| EN 3537:2010 | Aerospace series - Nuts, anchor, self-locking, fixed, two lug, with counterbore, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C |
| EN 15282:2007 | Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges |
| EN ISO 22301:2014 | Societal security - Business continuity management systems - Requirements (ISO 22301:2012) |
| EN ISO 15541:2001 | Ships and marine technology - Fire resistance of hose assemblies - Requirements for the test bench (ISO 15541:1999) |
| EN 15001-2:2008 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance |
| EN 15434:2006+A1:2010 | Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) |
| EN 15283-2:2008+A1:2009 | Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards |
| EN 16647:2015 | Fireplaces for liquid fuels - Decorative appliances producing a flame using alcohol based or gelatinous fuel - Use in private households |
| EN 14540:2014 | Fire-fighting hoses - Non-percolating layflat hoses for fixed systems |
| EN 15343:2007 | Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content |
| EN 14891:2017 | Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, assessment and verification of constancy of performance, classification and marking |
| EN 1677-6:2001+A1:2008 | Components for slings - Safety - Part 6: Links - Grade 4 |
| EN 3727:2006 | Aerospace series - Bearings, airframe rolling rigid with flanged alignment housing - Technical specification |
| EN ISO 11137-1:2015 | Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006, including Amd 1:2013) |
| EN ISO 14111:1999 | Natural gas - Guidelines to traceability in analysis (ISO 14111:1997) |
| EN 13877-3:2004 | Concrete pavements - Part 3: Specifications for dowels to be used in concrete pavements |
| EN 4074:2009 | Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 °C |
| EN 13707:2013 | Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics |
| BS EN 1433:2002 | Drainage channels for vehicular and pedestrian areas. Classification, design and testing requirements, marking and evaluation of conformity |
| EN 13980:2002 | Potentially explosive atmospheres - Application of quality systems |
| EN ISO 10472-1:2008 | Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997) |
| EN 16914:2017 | Aluminium and aluminium alloys - Hot-rolled armour plates in weldable aluminium alloy - Technical delivery conditions |
| EN 1757-3:2002 | Safety of industrial trucks - Pedestrian controlled manual and semi-manual trucks - Part 3: Platform trucks |
| EN 1253-3:2016 | Gullies for buildings - Part 3: Evaluation of conformity |
| EN 969:2009 | Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods |
| EN 14846:2008 | Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods |
| EN 14419:2009 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Surveillance systems |
| EN 13815:2006 | Fibrous gypsum plaster casts - Definitions, requirements and test methods |
| EN 15814:2011+A2:2014 | Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements |
| EN 1748-1-2:2004 | Glass in building - Special basic products - Borosilicate glasses - Part 1-2: Evaluation of conformity/Product standard |
| EN ISO 9004-1 : 1994 | QUALITY SYSTEMS - PRINCIPAL CONCEPTS AND APPLICATIONS - GUIDE TO QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS |
| EN ISO 14727:1998/AC:1998 | DENTAL IMPLANTS - PREFABRICATED PARTS CONNECTING SUPRASTRUCTURES TO DENTAL IMPLANTS - CONTENTS OF TECHNICAL FILE |
| EN 1776:2015 | Gas infrastructure - Gas measuring systems - Functional requirements |
| EN 14375:2016 | Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing |
| EN ISO 17989-1:2015 | Tractors and machinery for agriculture and forestry - Sustainability - Part 1: Principles (ISO 17989-1:2015) |
| EN 4133:2009 | Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 °C |
| EN 13674-3:2006+A1:2010 | Railway applications - Track - Rail - Part 3: Check rails |
| EN ISO 7218 : 2007 COR 2014 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - GENERAL REQUIREMENTS AND GUIDANCE FOR MICROBIOLOGICAL EXAMINATIONS (ISO 7218:2007/AMD 1:2013, CORRECTED VERSION 2014-04-15) |
| EN 14509:2013 | Self-supporting double skin metal faced insulating panels - Factory made products - Specifications |
| EN 13015:2001+A1:2008 | Maintenance for lifts and escalators - Rules for maintenance instructions |
| EI 1540 : 2014 | DESIGN, CONSTRUCTION, COMMISSIONING, MAINTENANCE AND TESTING OF AVIATION FUELLING FACILITIES |
| EN ISO 16904:2016 | Petroleum and natural gas industries - Design and testing of LNG marine transfer arms for conventional onshore terminals (ISO 16904:2016) |
| EN 2337:2006 | Aerospace series - Spherical plain bearings - Technical specification |
| EN 16582-2:2015 | Domestic swimming pools - Part 2: Specific requirements including safety and test methods for inground pools |
| EN 13604:2013 | Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper |
| EN ISO 10007 : 1996 | QUALITY MANAGEMENT - GUIDELINES FOR CONFIGURATION MANAGEMENT |
| EN 14626:2012 | Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy |
| EN 15012:2007 | Plastics piping systems - Soil and waste discharge systems within the building structure - Performance characteristics for pipes, fittings and their joints |
| EN ISO 14554-1:2013 | Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements (ISO 14554-1:2013) |
| EN 2549:2006 | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| EN ISO 11140-3:2009 | Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test (ISO 11140-3:2007, including Cor 1:2007) |
| EN 15827:2011 | Railway applications - Requirements for bogies and running gears |
| EN 16747:2015 | Maritime and port security services |
| EN 3431:2007 | Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, silver plated - Classification: 1 100 MPa (at ambient temperature) / 425 °C |
| EN 14023:2010 | Bitumen and bituminous binders - Specification framework for polymer modified bitumens |
| EN 15313:2016 | Railway applications - In-service wheelset operation requirements - In-service and off-vehicle wheelset maintenance |
| EN 14351-1:2006+A2:2016 | Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets |
| EN ISO 3452-6:2008 | Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 degrees C (ISO 3452-6:2008) |
| EN 1401-1:2009 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system |
| EI MODEL CODE SAFE PRACTICE PT7 : 1998 | DESIGN, CONSTRUCTION, OPERATION AND MAINTENANCE OF AVIATION FUELLING FACILITIES |
| EN 15345:2007 | Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates |
| EN 253:2009+A2:2015 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene |
| EN 13963:2014 | Jointing materials for gypsum boards - Definitions, requirements and test methods |
| CEN/TS 1565-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene-copolymer blends (SAN+PVC) - Part 2: Guidance for the assessment of conformity |
| EN 9104:2006 | Aerospace series - Quality management systems - Requirements for Aerospace Quality Management System Certification/Registrations Programs |
| EN 14532-1:2004 | Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys |
| EN 16309:2014+A1:2014 | Sustainability of construction works - Assessment of social performance of buildings - Calculation methodology |
| EN 16853:2017 | Conservation of cultural heritage - Conservation process - Decision making, planning and implementation |
| EN 14081-1:2016 | Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements |
| EN 54-24:2008 | Fire detection and fire alarm systems - Part 24: Components of voice alarm systems - Loudspeakers |
| EN 13876:2002 | Transport - Logistics and Services - Goods transport chains - Code of practice for the provision of cargo transport services |
| EN 15389:2008 | Industrial valves - Performance characteristics of thermoplastic valves when used as construction products |
| EN 14733:2005+A1:2010 | Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control |
| EN 15221-3:2011 | Facility Management - Part 3: Guidance on quality in Facility Management |
| EN 19694-1:2016 | Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 1: General aspects |
| EN 14889-1:2006 | Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity |
| EN 14209:2017 | Preformed plasterboard cornices - Definitions, requirements and test methods |
| EN 16855-1:2017 | Walk-in cold rooms - Definition, thermal insulation performance and test methods - Part 1: Prefabricated cold room kits |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| EN 13915:2017 | Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods |
| EN 4499:2009 | Aerospace series - Screws, 100° countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| EN 15167-2:2006 | Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Conformity evaluation |
| EN 14637:2007 | Building hardware - Electrically controlled hold-open systems for fire/smoke door assemblies - Requirements, test methods, application and maintenance |
| EN 15651-5:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 5: Assessment and verification of constancy of performance, marking and labelling |
| EN 16222:2012 | Cathodic protection of ship hulls |
| EN 16590-4:2014 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4: Production, operation, modification and supporting processes (ISO 25119-4:2010 modified) |
| EN 556-2:2015 | Sterilization of medical devices - Requirements for medical devices to be designated 'STERILE" - Part 2: Requirements for aseptically processed medical devices |
| EN 15381:2008 | Geotextiles and geotextile-related products - Characteristics required for use in pavements and asphalt overlays |
| EN 737-2:1998/A1:1999 | MEDICAL GAS PIPELINE SYSTEMS - PART 2: ANAESTHETIC GAS SCAVENGING DISPOSAL SYSTEMS - BASIC REQUIREMENTS |
| EN 1748-2-2:2004 | Glass in building - Special basic products - Part 2-2: Glass ceramics - Evaluation of conformity/Product standard |
| EN 4636:2009 | Aerospace series - Screws, 100° countersunk head, six lobe recess, short thread, in titanium alloy TI-P64001, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| EN 1857:2010 | Chimneys - Components - Concrete flue liners |
| EN 15274:2015 | General purpose adhesives for structural assembly - Requirements and test methods |
| EN 14716:2004 | Stretched ceilings - Requirements and test methods |
| EN 9111:2005 | Aerospace series - Quality management systems - Assessment applicable to maintenance organizations (based on ISO 9001:2000) |
| EN 14525:2004 | Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U PE, Fibre-cement |
| EN 14545:2008 | Timber structures - Connectors - Requirements |
| EN 15015:2007 | Plastics piping systems - Systems for hot and cold water not intended for human consumption - Performance characteristics for pipes, fittings and their joints |
| EN 14350-2:2004 | Child use and care articles - Drinking equipment - Part 2: Chemical requirements and tests |
| EN 54-16:2008 | Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment |
| EN 15821:2010 | Multi-firing sauna stoves fired by natural wood logs - Requirements and test methods |
| EN 16397-2:2014 | Flexible couplings - Part 2: Characteristics and testing for metal banded flexible couplings, adaptors and bushes |
| EN 4425:2006 | Aerospace series - Washers, tab in corrosion resisting steel for flight control rods - Dimensions |
| EN ISO 10451:2010 | Dentistry - Contents of technical file for dental implant systems (ISO 10451:2010) |
| EN 13924-1:2015 | Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 1: Hard paving grade bitumens |
| EN ISO 19900:2013 | Petroleum and natural gas industries - General requirements for offshore structures (ISO 19900:2013) |
| EN 14969:2006 | Railway applications - Track - Qualification system for railway trackwork contractors |
| EN 9320:2014 | Aerospace series - Programme Management - General guidelines for acquisition and supply of open systems |
| EN 4819:2012 | Aerospace series - Contact Memory Button (CMB) tags intended for aircraft use |
| EN 14125:2013 | Thermoplastic and flexible metal pipework for underground installation at petrol filling stations |
| EN 14065:2016 | Textiles - Laundry processed textiles - Biocontamination control system |
| EN 9104-003:2010 | Aerospace series - Quality management systems - Part 003: Requirements for Aerospace Quality Management System (AQMS) Auditor Training and Qualification |
| EN ISO 13628-15:2011 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 15: Subsea structures and manifolds (ISO 13628-15:2011) |
| EN 13693:2004+A1:2009 | Precast concrete products - Special roof elements |
| EN 13771-1:2016 | Compressors and condensing units for refrigeration - Performance testing and test methods - Part 1: Refrigerant compressors |
| EN 3538:2010 | Aerospace series - Nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C |
| EN 1947:2014 | Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles |
| EN ISO 8230 : 1997 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES USING PERCHLOROETHYLENE |
| EN 179:2008 | Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes - Requirements and test methods |
| EN 4590:2005 | Aerospace series - Retainers, spring, sheet metal, for self-locking barrel nuts, in corrosion resisting steel, passivated |
| EN 14620-1:2006 | Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 1: General |
| EN ISO/TS 15877-7 : 2003 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| EN 3840:2007 | Aerospace series - Paints and varnishes - Technical specification |
| EN 14384:2005 | Pillar fire hydrants |
| EN 14695:2010 | Flexible sheets for waterproofing - Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics |
| EN 15644:2008 | Traditionally designed prefabricated stairs made of solid wood - Specifications and requirements |
| EN 13981-1:2003 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 1: Extruded products |
| EN 4312:2006 | Aerospace series - Studs, coarse tolerance reduced shank, medium length thread, in heat and corrosion resisting steel, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| EN ISO 13940:2016 | Health informatics - System of concepts to support continuity of care (ISO 13940:2015) |
| EN ISO 14051:2011 | Environmental management - Material flow cost accounting - General framework (ISO 14051:2011) |
| EN 1858:2008+A1:2011 | Chimneys - Components - Concrete flue blocks |
| EN 14436:2004 | Copper and copper alloys - Electrolytically tinned strip |
| EN 1457-1:2012 | Chimneys - Clay/ceramic flue liners - Part 1: Flue liners operating under dry conditions - Requirements and test methods |
| EN 1422:2014 | Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods |
| EN 4501:2006 | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| EN 14496:2017 | Gypsum based adhesives for thermal/acoustic insulation composite panels and gypsum boards - Definitions, requirements and test methods |
| EN 14200:2004 | Railway applications - Suspension components - Parabolic springs, steel |
| EN 295-10:2005 | Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 10: Performance requirements |
| EN 438-7:2005 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes |
| EN 2043:2013 | Aerospace series - Metallic materials - General requirements for semi-finished product qualification (excluding forgings and castings) |
| EN 15348:2014 | Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates |
| EN 4071:2009 | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 °C |
| EN 1594:2013 | Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements |
| EN 16590-3:2014 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3: Series development, hardware and software (ISO 25119-3:2010 modified) |
| EN 516:2006 | Prefabricated accessories for roofing - Installations for roof access - Walkways, treads and steps |
| EN ISO 9000-1 : 1994 | QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - PART 1: GUIDELINES FOR SELECTION AND USE (ISO 9000-1:1994) |
| EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
| EN 54-27:2015 | Fire detection and fire alarms systems - Part 27: Duct smoke detectors |
| EN 14339:2005 | Underground fire hydrants |
| EN ISO 14644-4:2001 | Cleanrooms and associated controlled environments - Part 4: Design, construction and start-up (ISO 14644-4:2001) |
| EN 1330-1:2014 | Non destructive testing - Terminology - Part 1: List of general terms |
| EN 4311:2006 | Aerospace series - Studs, coarse tolerance reduced shank, medium length threads, in heat and corrosion resisting steel, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 315 °C |
| EN 3868:2004 | Aerospace series - Pipe couplings, loose flanges and seals - Flange connectors, welded, in titanium alloy TI-P64001 |
| EN 12842:2012 | Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods |
| EN 15497:2014 | Structural finger jointed solid timber - Performance requirements and minimum production requirements |
| EN 16590-2:2014 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase (ISO 25119-2:2010 modified) |
| EN 13674-1:2011+A1:2017 | Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above |
| EN 13913:2003 | Railway applications - Rubber suspension components - Elastomer-based mechanical parts |
| EN ISO 11980:2012 | Ophthalmic optics - Contact lenses and contact lens care products - Guidance for clinical investigations (ISO 11980:2012) |
| EN 4137:2009 | Aerospace series - Bolts, normal bi-hexagonal head, stepped shank, long thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| EN 598:2007+A1:2009 | Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods |
| EN 9137:2012 | Quality management systems - Guidance for the Application of AQAP 2110 within an EN 9100 Quality Management System |
| EN ISO 20857:2013 | Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) |
| EN 13674-2:2006+A1:2010 | Railway applications - Track - Rail - Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above |
| EN 13253:2016 | Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments) |
| EN 1856-2:2009 | Chimneys - Requirements for metal chimneys - Part 2: Metal flue liners and connecting flue pipes |
| EN ISO 22000:2005 | Food safety management systems - Requirements for any organization in the food chain (ISO 22000:2005) |
| EN 818-1:1996+A1:2008 | Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance |
| EN 16590-1:2014 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development (ISO 25119-1:2010 modified) |
| EN 15682-2:2013 | Glass in building - Heat soaked thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard |
| EN 15317:2013 | Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment |
| EN 14424:2013 | Hose fittings with screwed ferrules |
| EN 334:2005+A1:2009 | Gas pressure regulators for inlet pressures up to 100 bar |
| EN 2859:2006 | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated, metric series - Classification: 1 100 MPa (at ambient temperature) / 235 °C |
| EN 14566:2008+A1:2009 | Mechanical fasteners for gypsum plasterboard systems - Definitions, requirements and test methods |
| EN 14782:2006 | Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements |
| EN 3444:2006 | Aerospace series - Bolt, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1 250 MPa (at ambient temperature) /650 C |
| EN ISO/IEC 15416:2001 | Information technology - Automatic identification and data capture techniques - Bar code print quality test specification - Linear symbols (ISO/IEC 15416:2000) |
| EN ISO/IEC 15423:2010 | Information technology - Automatic identification and data capture techniques - Bar code scanner and decoder performance testing (ISO/IEC 15423:2009) |
| EN ISO 9000-3 : 1997 | QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - GUIDELINES FOR THE APPLICATION OF ISO 9001:1994 TO THE DEVELOPMENT, SUPPLY, INSTALLATION AND MAINTENANCE OF COMPUTER SOFTWARE |
| EN 16993:2018 | Geosynthetic barriers - Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids |
| EN 13597:2003 | Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs |
| EN 1856-1:2009 | Chimneys - Requirements for metal chimneys - Part 1: System chimney products |
| EN 13602:2013 | Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors |
| EN 16361:2013+A1:2016 | Power operated pedestrian doors - Product standard, performance characteristics - Pedestrian doorsets, other than swing type, initially designed for installation with power operation |
| EN 3052:2009 | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature) / 425 °C |
| EN 14680:2015 | Adhesives for non-pressure thermoplastics piping systems - Specifications |
| EN 2882:2006 | Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 235 °C |
| EN 15824:2017 | Specifications for external renders and internal plasters based on organic binders |
| EN 1474-3:2008 | Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 3: Offshore transfer systems |
| EN 3867:2004 | Aerospace series - Pipe couplings, loose flanges and seals - Flanges in titanium alloy TI-P64001 |
| EN ISO 23936-1:2009 | Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics (ISO 23936-1:2009) |
| EN 13771-2:2017 | Compressors and condensing units for refrigeration - Performance testing and test methods - Part 2: Condensing units |
| EN 572-9:2004 | Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard |
| EN 14353:2017 | Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods |
| EN ISO 14534:2015 | Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2011) |
| EN 14411:2016 | Ceramic tiles - Definition, classification, characteristics, assessment and verification of constancy of performance and marking |
| EN 16475-2:2017 | Chimneys - Accessories - Part 2: Chimney fans - Requirements and test methods |
| EN ISO 14344:2010 | Welding consumables - Procurement of filler materials and fluxes (ISO 14344:2010) |
| EN 2535:2011 | Aerospace series - Vacuum deposition of cadmium |
| EN 3-10:2009 | Portable fire extinguishers - Part 10: Provisions for evaluating the conformity of a portable fire extinguisher to EN 3-7 |
| EN ISO 11608-1:2015 | Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2014) |
| BS 5750-4:1990 | Quality systems Guide to the use of BS 5750:Part 1 \'Specification for design/development, production, installation and servicing\', Part 2 \'Specification for production and installation\' and Part 3 \'Specification for final inspection and test\' |
| EN 15228:2009 | Structural timber - Structural timber preservative treated against biological attack |
| EN 14195:2014 | Metal framing components for gypsum board systems - Definitions, requirements and test methods |
| EN 16484:2015 | Leather - Requirements for the determination of the origin of leather production |
| EN ISO 16961:2015 | Petroleum, petrochemical and natural gas industries - Internal coating and lining of steel storage tanks (ISO 16961:2015) |
| EN 15542:2008 | Ductile iron pipes, fittings and accessories - External cement mortar coating for pipes - Requirements and test methods |
| EN 494:2012+A1:2015 | Fibre-cement profiled sheets and fittings - Product specification and test methods |
| EN 15322:2013 | Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders |
| EN 1863-2:2004 | Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard |
| EN ISO 17662:2016 | Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO 17662:2016) |
| EN 14342:2013 | Wood flooring and parquet - Characteristics, evaluation of conformity and marking |
| EN 998-2:2016 | Specification for mortar for masonry - Part 2: Masonry mortar |
| EN 14587-3:2012 | Railway applications - Track - Flash butt welding of rails - Part 3: Welding in association with crossing construction |
| EN 14287:2004 | Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components |
| EN 517:2006 | Prefabricated accessories for roofing - Roof safety hooks |
| EN ISO 15743:2008 | Ergonomics of the thermal environment - Cold workplaces - Risk assessment and management (ISO 15743:2008) |
| EN 16497-1:2015 | Chimneys - Concrete System Chimneys - Part 1: Non-balanced flue applications |
| EN 15267-1:2009 | Air quality - Certification of automated measuring systems - Part 1: General principles |
| EN 448:2015 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| EN 295-2:2013 | Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of conformity and sampling |
| EN ISO/IEC 17021:2011 | Conformity assessment - Requirements for bodies providing audit and certification of management systems (ISO/IEC 17021:2011) |
| EN 14800:2007 | Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels |
| EN 4127:2009 | Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 °C |
| EN 13658-1:2005 | Metal lath and beads - Definitions, requirements and test methods - Part 1: Internal plastering |
| UNI EN 9100 : 2009 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE ORGANIZATIONS |
| EN ISO 17665-1:2006 | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006) |
| EN 459-3:2015 | Building lime - Part 3: Conformity evaluation |
| EN 694:2014 | Fire-fighting hoses - Semi-rigid hoses for fixed systems |
| EN 14889-2:2006 | Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and conformity |
| EN 14508:2016 | Postal services - Quality of service - Measurement of the transit time of end-to-end services for single piece non-priority mail and second class mail |
| EN 14211:2012 | Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence |
| EN 3043:2008 | Aerospace series - Fasteners, externally threaded, in heat resisting steel FE PA92HT (A286) - Classification: 900 MPa/650 °C, manufacturing method optional - Technical specification |
| EN 15564:2008 | Precast concrete products - Resin bound concrete - Requirements and test methods |
| EN 4167:2004 | Aerospace series - Clips, spring tension, three parts - Inner clips in heat resisting steel FE-PA2601 (A286) |
| EN 14179-2:2005 | Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard |
| EN 1457-2:2012 | Chimneys - Clay/ceramic flue liners - Part 2: Flue liners operating under wet conditions - Requirements and test methods |
| EN 4134:2009 | Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in heat resisting nickel base alloy, aluminium IVD coated - Classification: 1 250 MPa (at ambient temperature) / 425°C |
| EN 13802:2013 | Railway applications - Suspension components - Hydraulic dampers |
| EN 3388:2009 | Aerospace series - Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification 1 275 MPa/650 °C - Manufacturing method optional - Technical specification |
| EN 74-1:2005 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures |
| EN 15593:2008 | Packaging - Management of hygiene in the production of packaging for foodstuffs - Requirements |
| EN ISO 16426:2002 | Fasteners - Quality assurance system (ISO 16426:2002) |
| EN ISO 9003:1994/AC:1997 | QUALITY SYSTEMS - SPECIFICATION FOR FINAL INSPECTION AND TEST |
| EN 9200:2004 | Aerospace series - Programme management - Guidelines for project management specification |
| EN 4168:2004 | Aerospace series - Clips, spring tension, three parts - Outer clips in heat resisting steel FE-PA2601 (A286) |
| EN 4509:2006 | Aerospace series - Screws, 100 countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| EI 1581 : 2016 | SPECIFICATIONS AND LABORATORY QUALIFICATION PROCEDURES FOR AVIATION FUEL FILTER/WATER SEPARATORS |
| OVE/ONORM EN 50556 : 2014 | ROAD TRAFFIC SIGNAL SYSTEMS |
| EN 2888:2006 | Aerospace series - Metric Bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C |
| EN 14901:2014 | Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods |
| EN 14286:2008 | Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods |
| EN ISO 15882:2008 | Sterilization of health care products - Chemical indicators - Guidance for selection, use and interpretation of results (ISO 15882:2008) |
| EN 54-30:2015 | Fire detection and fire alarm systems - Part 30: Multi-sensor fire detectors - Point detectors using a combination of carbon monoxide and heat sensors |
| EN 442-1:2014 | Radiators and convectors - Part 1: Technical specifications and requirements |
| EN 14783:2013 | Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements |
| EN 351-1:2007 | Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention |
| EN 13956:2012 | Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics |
| EN 2883:2009 | Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| EN 14188-2:2004 | Joint fillers and sealants - Part 2: Specifications for cold applied sealants |
| EN 14636-2:2009 | Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC) - Part 2: Manholes and inspection chambers |
| EN 14016-1:2004 | Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 1: Definitions, requirements |
| EN 13813:2002 | Screed material and floor screeds - Screed material - Properties and requirements |
| EN ISO 13408-3:2011 | Aseptic processing of health care products - Part 3: Lyophilization (ISO 13408-3:2006) |
| EN 1806:2006 | Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and test methods |
| EN 764-5:2014 | Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification |
| EN 13924-2:2014 | Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 2: Multigrade paving grade bitumens |
| EN 16280:2012 | Breath alcohol test devices for general public - Requirements and test methods |
| EN ISO/IEC 19796-1:2009 | Information technology - Learning, education and training - Quality management, assurance and metrics - Part 1: General approach (ISO/IEC 19796-1:2005) |
| EN ISO 6789:2003 | Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure (ISO 6789:2003) |
| EN 15275:2015 | Structural adhesives - Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures |
| EN 14625:2012 | Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry |
| EN 3226:2009 | Aerospace series - Nuts, hexagon, plain, normal height, normal across flats, steel, cadmium plated - Classification 1 100 MPa/235 °C |
| EN 15346:2014 | Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates |
| EN 15650:2010 | Ventilation for buildings - Fire dampers |
| EN 3389:2009 | Aerospace series - Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH1302 (Waspaloy) - Classification: 1 210 MPa/730 °C - Manufacturing method optional - Technical specification |
| EN 14396:2004 | Fixed ladders for manholes |
| EN 331:2015 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
| EN 274-3:2002 | Waste fittings for sanitary appliances - Part 3: Quality control |
| EN 4649:2009 | Aerospace series - Handheld fire extinguishers with synthesis gases, for aircraft use - Technical specification and qualification conditions |
| EN 13888:2009 | Grout for tiles - Requirements, evaluation of conformity, classification and designation |
| EN 13967:2012+A1:2017 | Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics |
| SAE AS 9120 : 2016 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE DISTRIBUTORS |
| BIS IS 16122 : 2013 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - GENERAL REQUIREMENTS AND GUIDANCE FOR MICROBIOLOGICAL EXAMINATIONS |
| IEEE/ISO/IEC 12207-2008 | ISO/IEC/IEEE International Standard - Systems and software engineering -- Software life cycle processes |
| DIN ISO 16063-22:2015-04 | METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 22: SHOCK CALIBRATION BY COMPARISON TO A REFERENCE TRANSDUCER (ISO 16063-22:2005 + AMD.1:2014) |
| DIN EN 15234-1:2011-05 | Solid biofuels - Fuel quality assurance - Part 1: General requirements |
| S.R. CEN/TS 45545-1:2009 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL |
| I.S. CEN ISO TS 21432:2005 | NON-DESTRUCTIVE TESTING - STANDARDS TEST METHOD FOR DETERMINING RESIDUAL STRESSES BY NEUTRON DIFFRACTION |
| I.S. EN 124-4:2015 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 4: GULLY TOPS AND MANHOLE TOPS MADE OF STEEL REINFORCED CONCRETE |
| I.S. CEN TR 15545:2006 | GUIDE TO THE USE OF EN 545 |
| DD CLC/TS 50537-2:2010 | Railway applications. Mounted parts of the traction transformer and cooling system Pump for insulating liquid for traction transformers and reactors |
| 17/30355188 DC : 0 | BS ISO/IEC 24748-1 - SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE MANAGEMENT - PART 1: GUIDELINES FOR LIFE CYCLE MANAGEMENT |
| CSA Z24512 : 2010 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE MANAGEMENT OF DRINKING WATER UTILITIES AND FOR THE ASSESSMENT OF DRINKING WATER SERVICES |
| ASTM E 2952 : 2017 : REDLINE | Standard Specification for Air-Purifying Respiratory Protective Smoke Escape Devices (RPED) |
| ISO 11462-1:2001 | Guidelines for implementation of statistical process control (SPC) Part 1: Elements of SPC |
| PREN 50341-1 : DRAFT 2012 | OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS |
| I.S. EN 60079-19:2011 | EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION |
| I.S. EN 13310:2015 | KITCHEN SINKS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| DEFSTAN 05-94/2(1995) : 1995 | GUIDANCE ON QUALITY SYSTEM REQUIREMENTS FOR THE IMPLEMENTATION OF DEFSTANS 05-91, 05-92 AND 05-93 |
| BS EN 13616-2:2016 | Overfill prevention devices for static tanks for liquid fuels Overfill prevention devices without a closure device |
| UNE-EN 15221-5:2012 | Facility Management - Part 5: Guidance on Facility Management processes |
| EN ISO 14031:2013 | Environmental management - Environmental performance evaluation - Guidelines (ISO 14031:2013) |
| PD CEN/TR 16017:2010 | Guide to the use of EN 598 |
| UNE-EN 61400-1:2006 | Wind turbines - Part 1: Design requirements |
| UNE-EN 15682-2:2014 | Glass in building - Heat soaked thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard |
| CSA ISO 10008 : 2015 | QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR BUSINESS-TO-CONSUMER ELECTRONIC COMMERCE TRANSACTIONS |
| BS EN 14963:2006 | Roof coverings. Continuous rooflights of plastics with or without upstands. Classification, requirements and test methods |
| I.S. EN 15129:2009 | ANTI-SEISMIC DEVICES |
| I.S. EN 12101-8:2011 | SMOKE AND HEAT CONTROL SYSTEMS - PART 8: SMOKE CONTROL DAMPERS |
| 16/30338126 DC : 0 | BS EN 13492 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT |
| 12/30209299 DC : 0 | BS ISO 10008 - QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR BUSINESS-TO-CONSUMER ELECTRONIC COMMERCE TRANSACTIONS |
| PREN 14680 : DRAFT 2013 | ADHESIVES FOR NON-PRESSURE THERMOPLASTIC PIPING SYSTEMS - SPECIFICATIONS |
| PREN 14420-1 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, SURVEY, DESIGNATION AND TESTING |
| 12/30244863 DC : 0 | BS ISO 404 - STEEL AND STEEL PRODUCTS - GENERAL TECHNICAL DELIVERY REQUIREMENTS |
| BS ISO 18400-103:2017 | Soil quality. Sampling Safety |
| PD IEC/TS 62668-1:2016 | Process management for avionics. Counterfeit prevention Avoiding the use of counterfeit, fraudulent and recycled electronic components |
| BS EN 15564:2008 | Precast concrete products. Resin bound concrete. Requirements and test methods |
| PREN 14716 : DRAFT 2014 | STRETCHED CEILINGS - REQUIREMENTS AND TEST METHODS |
| BS EN 13282-3:2013 | Hydraulic road binders Conformity evaluation |
| CEN ISO/TR 24094:2007 | Analysis of natural gas - Validation methods for gaseous reference materials (ISO/TR 24094:2006) |
| 14/30298051 DC : 0 | BS EN 61069-1 ED 2.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 1: TERMINOLOGY AND BASIC CONCEPTS |
| 09/30208451 DC : 0 | BS EN 54-29 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 29: MULTI-SENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF SMOKE AND HEAT SENSORS |
| DIN EN 15827:2011-06 | Railway applications - Requirements for bogies and running gears |
| 08/30193715 DC : 0 | BS EN 62246-1 ED.2 - REED SWITCHES - PART 1: GENERIC SPECIFICATION |
| PREN 15651-5 : DRAFT 2012 | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 5: EVALUATION OF CONFORMITY AND MARKING |
| PREN 12050-3 : DRAFT 2012 | WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 3: LIFTING PLANTS FOR LIMITED APPLICATIONS |
| DIN EN 124-4:2015-09 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 4: GULLY TOPS AND MANHOLE TOPS MADE OF STEEL REINFORCED CONCRETE |
| 18/30322318 DC : 0 | BS ISO 20613 - SENSORY ANALYSIS - GENERAL GUIDANCE FOR THE APPLICATION OF SENSORY ANALYSIS IN QUALITY CONTROL |
| DIN EN 9000-1:2000-09 (Draft) | AEROSPACE SERIES - AEROSPACE INDUSTRY QUALITY SYSTEM - PART 1: REQUIREMENTS APPLICABLE TO SUPPLIERS |
| DIN EN ISO 17989-1:2016-09 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SUSTAINABILITY - PART 1: PRINCIPLES (ISO 17989-1:2015) |
| UNI CEN/TS 14816 : 2009 | FIXED FIREFIGHTING SYSTEMS - WATER SPRAY SYSTEMS - DESIGN, INSTALLATION AND MAINTENANCE |
| UNE-EN 9110:2015 | Quality Management Systems - Requirements for Aviation Maintenance Organizations |
| 10/30184538 DC : 0 | BS ISO/IEC 20000-2 - INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 2: GUIDANCE ON THE APPLICATION OF SERVICE MANAGEMENT SYSTEMS |
| API 621 : 2010 | RECONDITIONING OF METALLIC GATE, GLOBE, AND CHECK VALVES |
| BS EN 61400-1 : 2005 | WIND TURBINES - PART 1: DESIGN REQUIREMENTS |
| ISO 55000:2014 | Asset management — Overview, principles and terminology |
| DIN ISO 26000:2011-01 | Guidance on social responsibility (ISO 26000:2010) |
| BS HB10188(2001) : 2001 | ISO 9001: 2000 FOR SMALL BUSINESSES - 2ND EDITION |
| 15/30313954 DC : 0 | BS ISO 16813 - BUILDING ENVIRONMENT DESIGN - INDOOR ENVIRONMENT - GENERAL PRINCIPLES |
| BS EN 50598-3:2015 | Ecodesign for power drive systems, motor starters, power electronics and their driven applications Quantitative eco design approach through life cycle assessment including product category rules and the content of environmental declarations |
| BS EN 50556:2011 | Road traffic signal systems |
| UNE-EN 124-2:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 2: Gully tops and manhole tops made of cast iron |
| 10/30233946 DC : 0 | BS EN 544 - BITUMEN SHINGLES WITH MINERAL AND/OR SYNTHETIC REINFORCEMENTS - PRODUCT SPECIFICATION AND TEST METHODS |
| I.S. EN 50657:2017 | RAILWAYS APPLICATIONS - ROLLING STOCK APPLICATIONS - SOFTWARE ON BOARD ROLLING STOCK |
| 11/30250572 DC : 0 | BS EN 15322 - BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| 04/30118843 DC : DRAFT SEP 2004 | EN 15014 - PLASTICS PIPING SYSTEMS - BURIED AND ABOVE GROUND SYSTEMS FOR WATER AND OTHER FLUIDS UNDER PRESSURE |
| 12/30266154 DC : 0 | BS EN 16497-1 - CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 1: NON-BALANCED FLUE APPLICATIONS |
| 17/30338449 DC : 0 | BS EN ISO 15175 - SOIL QUALITY - CHARACTERIZATION OF CONTAMINATED SOIL RELATED TO GROUNDWATER PROTECTION |
| ISO/TS 16949:2009 | Quality management systems Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations |
| I.S. EN 15681-2:2017 | GLASS IN BUILDING - BASIC ALUMINO SILICATE GLASS PRODUCTS - PART 2: PRODUCT STANDARD |
| BS EN ISO 23936-1:2009 | Petroleum, petrochemical and natural gas industries. Non-metallic materials in contact with media related to oil and gas production Part 1: Thermoplastics |
| NF EN 61400-22:2011 | WIND TURBINES - PART 22: CONFORMITY TESTING AND CERTIFICATION |
| 09/30195206 DC : 0 | BS EN 54-30 - FIRE DETECTION AND ALARM SYSTEMS - PART 30: MULTI-SENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF CARBON MONOXIDE AND HEAT SENSORS |
| IWA 17:2014 | Information and operations security and integrity requirements for lottery and gaming organizations |
| 11/30248672 DC : 0 | BS EN 13967 - FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF SHEETS INCLUDING PLASTIC AND RUBBER BASEMENT TANKING SHEET - DEFINITIONS AND CHARACTERISTICS |
| UNE-EN 9104-003:2011 | Aerospace series - Quality management systems - Part 003: Requirements for Aerospace Quality Management System (AQMS) Auditor Training and Qualification |
| BS EN ISO/IEC 17065:2012 | Conformity assessment. Requirements for bodies certifying products, processes and services |
| BS ISO 15161:2001 | Guidelines on the application of ISO 9001:2000 for the food and drink industry |
| PREN 50128 : DRAFT 2009 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SOFTWARE FOR RAILWAY CONTROL AND PROTECTION SYSTEMS |
| I.S. EN 16497-1:2015 | CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 1: NON-BALANCED FLUE APPLICATIONS |
| 00/203087 DC : DRAFT AUG 2000 | IEC 62147 - INTEGRATED CIRCUITS - UNIFIED QUALIFICATION STANDARD TO MEET IECQ AND END-USER CERTIFICATION |
| ACI 121R : 2008 | GUIDE FOR CONCRETE CONSTRUCTION QUALITY SYSTEMS IN CONFORMANCE WITH ISO 9001 |
| DIN EN 15213-4:2013-08 | INTELLIGENT TRANSPORT SYSTEMS - AFTER-THEFT SYSTEMS FOR THE RECOVERY OF STOLEN VEHICLES - PART 4: INTERFACE AND SYSTEM REQUIREMENTS IN TERMS OF LONG RANGE COMMUNICATION SYSTEM |
| DIN EN 3-10:2010-03 | Portable fire extinguishers - Part 10: Provisions for evaluating the conformity of a portable fire extinguisher to EN 3-7 |
| 09/30180884 DC : 0 | BS EN 50128 - RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SOFTWARE FOR RAILWAY CONTROL AND PROTECTION SYSTEMS |
| 14/30298023 DC : 0 | BS EN 61069-2 ED 2.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 2: ASSESSMENT METHODOLOGY |
| ANSI/MSE 2000 : 2008 | A MANAGEMENT SYSTEM FOR ENERGY |
| I.S. EN 13924:2006 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR HARD PAVING GRADE BITUMENS |
| I.S. EN 737-2:1998 | MEDICAL GAS PIPELINE SYSTEMS - PART 2: ANAESTHETIC GAS SCAVENGING DISPOSAL SYSTEMS - BASIC REQUIREMENTS |
| I.S. EN 62309:2004 | DEPENDABILITY OF PRODUCTS CONTAINING REUSED PARTS - REQUIREMENTS FOR FUNCTIONALITY AND TESTS |
| DIN CEN ISO/TS 13972;DIN SPEC 32987:2016-03 | Health informatics - Detailed clinical models, characteristics and processes (ISO/TS 13972:2015); English version CEN ISO/TS 13972:2015 |
| BS EN 16475-2:2017 | Chimneys. Accessories Chimney fans. Requirements and test methods |
| DIN EN 15564:2009-05 | PRECAST CONCRETE PRODUCTS - RESIN BOUND CONCRETE - REQUIREMENTS AND TEST METHODS |
| I.S. EN 438-7:2005 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES |
| BS ISO 18611-3:2014 | Ships and marine technology. Marine NOx reduction agent AUS 40 Handling, transportation and storage |
| 14/30299770 DC : 0 | BS EN 14534 - POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF THE TRANSIT TIME OF END-TO-END SERVICES FOR BULK MAIL |
| 16/30329422 DC : 0 | BS EN 12566-7 - SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 7: PREFABRICATED TERTIARY TREATMENT UNITS |
| I.S. EN 3537:2010 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, TWO LUG, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| I.S. EN 45012:1998 | GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS |
| 11/30179635 DC : 0 | BS EN 13850 - POSTAL SERVICES - QUALITY OF SERVICES - MEASUREMENT OF THE TRANSIT TIME OF END-TO-END SERVICES FOR SINGLE PIECE PRIORITY MAIL AND FIRST CLASS MAIL |
| 02/203838 DC : DRAFT MAR 2002 | |
| BS EN 4132:2009 | Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature)/235°C |
| ANSI/AAMI/ISO 22442-2:2016 | MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - PART 2: CONTROLS ON SOURCING, COLLECTION AND HANDLING |
| 12/30246663 DC : 0 | BS EN 16479 - WATER QUALITY - PERFORMANCE REQUIREMENTS AND CONFORMITY TEST PROCEDURES FOR WATER MONITORING EQUIPMENT - PART 1: AUTOMATED SAMPLING DEVICES (SAMPLERS) FOR WATER AND WASTE WATER |
| 07/30150218 DC : 0 | BS ISO 16192 - SPACE SYSTEMS - ASSESSMENT OF PRACTICAL KNOWLEDGE - PRINCIPLES AND GUIDELINES |
| CAN/CSA-ISO 13485:16 | Medical devices - Quality management systems - Requirements for regulatory purposes (Adopted ISO 13485:2016, third edition, 2016-03-01) |
| BS ISO 20252:2012 | Market, opinion and social research. Vocabulary and service requirements |
| ABS 0253 : 2016 | GUIDE FOR SOFTWARE SYSTEMS VERIFICATION ABS CYBERSAFETY[TM] VOLUME 4 |
| 11/30253413 DC : 0 | BS EN 16361 - POWER OPERATED PEDESTRIAN DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PEDESTRIAN DOOR SETS, OTHER THAN SWING TYPE, INITIALLY DESIGNED FOR INSTALLATION WITH POWER OPERATION WITHOUT RESISTANCE TO FIRE AND SMOKE LEAKAGE CHARACTERISTICS |
| UNE-EN 15497:2014 | Structural finger jointed solid timber - Performance requirements and minimum production requirements |
| BS EN ISO/IEC 19796-1:2009 | Information technology. Learning, education and training. Quality management, assurance and metrics General approach |
| I.S. EN 54-28:2016 | FIRE DETECTION AND FIRE ALARM SYSTEM - PART 28: NON-RESETTABLE LINE-TYPE HEAT DETECTORS |
| BS EN ISO 16904:2016 | Petroleum and natural gas industries. Design and testing of LNG marine transfer arms for conventional onshore terminals |
| I.S. CEN TS 15358:2006 | SOLID RECOVERED FUELS - QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THEIR APPLICATION TO THE PRODUCTION OF SOLID RECOVERED FUELS |
| I.S. EN 60794-4-10:2014 | OPTICAL FIBRE CABLES - PART 4-10: FAMILY SPECIFICATION - OPTICAL GROUND WIRES (OPGW) ALONG ELECTRICAL POWER LINES |
| I.S. EN 16993:2018 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF STORAGE LAGOONS, SECONDARY CONTAINMENT (ABOVE AND BELOW GROUND) AND OTHER CONTAINMENT APPLICATIONS FOR CHEMICALS, POLLUTED WATER AND PRODUCED LIQUIDS |
| S.R. CLC/TR 50506-1:2007 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - APPLICATION GUIDE FOR EN 50129 - PART 1: CROSS-ACCEPTANCE |
| BS EN 1254-6:2012 | Copper and copper alloys. Plumbing fittings Fittings with push-fit ends |
| I.S. EN ISO 8230:1998 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES USING PERCHLOROETHYLENE |
| 03/308166 DC : DRAFT JUNE 2003 | EN 50405:2003 - RAILWAY APPLICATIONS - CURRENT COLLECTION SYSTEMS - PANTOGRAPHS, TESTING METHODS FOR CARBON CONTACT STRIPS |
| UNE-EN 12101-8:2015 | Smoke and heat control systems - Part 8: Smoke control dampers |
| ISO/PAS 28003:2006 | Security management systems for the supply chain - Requirements for bodies providing audit and certification of supply chain security management systems |
| ASTM F 1058 : 2016 : REDLINE | Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire, Strip, and Strip Bar for Surgical Implant Applications (UNS R30003 and UNS R30008) |
| DIN EN ISO 11133:2015-01 | MICROBIOLOGY OF FOOD, ANIMAL FEED AND WATER - PREPARATION, PRODUCTION, STORAGE AND PERFORMANCE TESTING OF CULTURE MEDIA (ISO 11133:2014, CORRECTED VERSION 2014-11-01) |
| DIN EN 54-30:2015-11 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 30: MULTI-SENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF CARBON MONOXIDE AND HEAT SENSORS |
| BS EN ISO 15743:2008 | Ergonomics of the thermal environment. Cold workplaces. Risk assessment and management |
| 18/30358588 DC : 0 | BS EN ISO 29001 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SECTOR-SPECIFIC QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR PRODUCT AND SERVICE SUPPLY ORGANIZATIONS |
| I.S. EN 4819:2012 | AEROSPACE SERIES - CONTACT MEMORY BUTTON (CMB) TAGS INTENDED FOR AIRCRAFT USE |
| S.R. CEN TR 15640:2007 | HEALTH INFORMATICS - MEASURES FOR ENSURING THE PATIENT SAFETY OF HEALTH SOFTWARE |
| UNE-EN 12566-4:2017 | Small wastewater treatment systems for up to 50 PT - Part 4: Septic tanks assembled in situ from prefabricated kits |
| 06/30156800 DC : 0 | BS EN 14587-2 - RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 21: NEW R220, R260, R260MN AND R350HT GRADE RAILS BY MOBILE WELDING MACHINES AT SITES OTHER THAN A FIXED PLANT |
| CEI UNI EN 45510-6-3 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-3: TURBINE AUXILIARIES - CONDENSER PLANT |
| DIN EN 14846:2015-07 (Draft) | BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| I.S. CEN TS 14632:2006 | PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| 17/30359844 DC : 0 | BS EN 572-9 - GLASS IN BUILDING - BASIC SODA LIME SILICATE GLASS PRODUCTS - PART 9: PRODUCT STANDARD |
| BS ISO 21927-3 : 2006 | SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT EXHAUST VENTILATORS |
| CEI UNI ISO/IEC 20000-2 : 2011 | INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 2: CODE OF PRACTICE |
| 14/30292479 DC : 0 | BS EN 13230-3 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 3: TWIN-BLOCK REINFORCED SLEEPERS |
| NSF 416 : 2015 | SUSTAINABILITY ASSESSMENT FOR WATER TREATMENT CHEMICAL PRODUCTS |
| BS ISO 14488:2007 | Particulate materials. Sampling and sample splitting for the determination of particulate properties |
| API RP 1177 : 2017 | RECOMMENDED PRACTICE FOR STEEL PIPELINE CONSTRUCTION QUALITY MANAGEMENT SYSTEMS |
| 99/201503 DC : 0 | IEC 61479 ED.1 - LIVE WORKING - CONDUCTOR COVERS (LINE HOSES) OR INSULATING MATERIAL FOR ELECTRICAL PURPOSES |
| PREN 13160-3 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS |
| 13/30276234 DC : 0 | BS EN 15346 - PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES |
| 03/315684 DC : DRAFT SEP 2003 | ISO 10019 - GUIDELINES FOR THE SELECTION OF QUALITY MANAGEMENT SYSTEM CONSULTANTS AND USE OF THEIR SERVICES |
| PD ISO/IEC TR 20000-11:2015 | Information technology. Service management Guidance on the relationship between ISO/IEC 20000-1:2011 and service management frameworks: ITIL® |
| BS ISO/IEC 20000-2:2012 | Information technology. Service management Guidance on the application of service management systems |
| I.S. EN 9104:2006 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM CERTIFICATION/REGISTRATIONS PROGRAMS |
| I.S. EN 14409-1:2004 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 1: GENERAL |
| 07/30163293 DC : 0 | BS ISO 12576-2 - THERMAL INSULATION PRODUCTS CONFORMITY CONTROL SYSTEMS - PART 2: IN-SITU PRODUCTS |
| PREN 13160-2 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 2: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR PRESSURE AND VACUUM SYSTEMS |
| BS ISO 24512:2007 | Activities relating to drinking water and wastewater services. Guidelines for the management of drinking water utilities and for the assessment of drinking water services |
| PD CEN/TS 14632:2012 | Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Guidance for the assessment of conformity |
| BS ISO 22004:2014 | Food safety management systems. Guidance on the application of ISO 22000 |
| ISO 19011:2011 | Guidelines for auditing management systems |
| DEFSTAN 05-95/1(1991) : INTERIM | QUALITY SYSTEM REQUIREMENTS FOR THE DEVELOPMENT, SUPPLY AND MAINTENANCE OF SOFTWARE |
| DIN ISO 13411:1996-12 (Draft) | AEROSPACE - AIRFRAME ROLLING BEARINGS - NEEDLE ROLLER, NEEDLE TRACK ROLLER AND CYLINDRICAL ROLLER BEARINGS - TECHNICAL SPECIFICATION |
| DEFSTAN 00-56(PT1)/7(2017) : 2017 | SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 1: REQUIREMENTS |
| I.S. CEN ISO TS 14907-1:2005 | ROAD TRANSPORT AND TRAFFIC TELEMATICS - ELECTRONIC FEE COLLECTION - TEST PROCEDURES FOR USER AND FIXED EQUIPMENT - PART 1: DESCRIPTION OF TEST PROCEDURES |
| 03/320270 DC : DRAFT DEC 2003 | IEC 60794-4-10 ED.1 - OPTICAL FIBRE CABLES - PART 4-10: FAMILY SPECIFICATION - OPGW (OPTICAL GROUND WIRES) ALONG ELECTRICAL POWER LINES |
| I.S. EN 12845:2015 | FIXED FIREFIGHTING SYSTEMS - AUTOMATIC SPRINKLER SYSTEMS - DESIGN, INSTALLATION AND MAINTENANCE |
| UNE-EN 15346:2015 | Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates |
| I.S. EN ISO 13408-1:2015 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS (ISO 13408-1:2008, INCLUDING AMD 1:2013) |
| DIN EN 14636-1:2010-04 | Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC) - Part 1: Pipes and fittings with flexible joints; German version EN 14636-1:2009 |
| PD ISO/TS 20460:2015 | Paper and board. Automated on-line testing. Metrological comparability between standardized measurements and output of on-line gauges |
| BS EN ISO 13127:2012 | Packaging. Child resistant packaging. Mechanical test methods for reclosable child resistant packaging systems |
| I.S. EN 60895:2003 | LIVE WORKING - CONDUCTIVE CLOTHING FOR USE AT NOMINAL VOLTAGE UP TO 800 KV A.C. AND +/- 600 KV D.C. |
| 11/30248438 DC : 0 | BS EN 14141 - VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
| PD CEN/TR 15640:2007 | Health informatics. Measures for ensuring the patient safety of health software |
| API TR 18TR2 : 2017 | GUIDANCE TO API SPECIFICATION Q2 |
| BS ISO 28004 : 2007 | SECURITY MANAGEMENT SYSTEMS FOR THE SUPPLY CHAIN - GUIDELINES FOR THE IMPLEMENTATION OF ISO 28000 |
| BS EN 16747:2015 | Maritime and port security services |
| 16/30338037 DC : 0 | BS ISO/IEC 30754 - INFORMATION TECHNOLOGY - SOFTWARE TRUSTWORTHINESS - GOVERNANCE AND MANAGEMENT - SPECIFICATION |
| 12/30256067 DC | BS EN 12899-4 AMD1. Fixed, vertical road traffic signs. Part 4. Factory production control |
| I.S. EN 61160:2005 | DESIGN REVIEW |
| 11/30250578 DC : 0 | BS EN 13808 - BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CATIONIC BITUMINOUS EMULSIONS |
| I.S. EN 61513:2013 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - GENERAL REQUIREMENTS FOR SYSTEMS (IEC 61513:2011 (EQV)) |
| BS EN 61192-5:2007 | Workmanship requirements for soldered electric assemblies Rework, modification and repair of soldered electronic assemblies |
| DD CEN/TS 13244-7:2003 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage. Polyethylene (PE) Guidance for the assessment of conformity |
| BS EN ISO 13174:2012 | Cathodic protection of harbour installations |
| API 591 : 2014 | PROCESS VALVE QUALIFICATION PROCEDURE |
| 16/30332914 DC : 0 | BS EN 14353 - METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| BS EN 13565-1 : 2003 | FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| DIN EN 15644:2009-03 | TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS |
| 16/30329416 DC : 0 | BS EN 12566-3 - SMALL WASTEWATER TREATMENT SYSTEMS UP TO 50 PT - PART 3: PACKAGED AND/OR SITE ASSEMBLED DOMESTIC WASTEWATER TREATMENT PLANTS |
| 04/30106462 DC : DRAFT JUL 2004 | ISO/IEC 10967-3 - INFORMATION TECHNOLOGY - LANGUAGE INDEPENDENT ARITHMETIC - PART 3 : COMPLEX FLOATING POINT ARITHMETIC AND COMPLEX ELEMENTARY NUMERICAL FUNCTIONS |
| BS EN 15283-2 : 2008 | GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS |
| BS EN 61020-1:2009 | Electromechanical switches for use in electrical and electronic equipment Generic specification |
| 11/30238019 DC : 0 | BS EN 12809 - RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS |
| BS EN 16855-1:2017 | Walk-in cold rooms. Definition, thermal insulation performance and test methods Prefabricated cold room kits |
| S.R. CEN ISO TR 13881:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - CLASSIFICATION AND CONFORMITY ASSESSMENT OF PRODUCTS, PROCESSES AND SERVICES |
| PD ISO/IEC TS 33052:2016 | Information technology. Process reference model (PRM) for information security management |
| 08/30188489 DC : DRAFT AUG 2008 | BS EN 54-27 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 27: DUCT SMOKE DETECTORS |
| API Q1 CHINESE : 2013 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR MANUFACTURING ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRY |
| UNE-CWA 16393:2014 | Laboratory biorisk management - Guidelines for the implementation of CWA 15793:2008 |
| DIN EN 12101-7:2011-08 | Smoke and heat control systems - Part 7: Smoke duct sections |
| BIP 2020 : 2014 | THE BUSINESS IMPROVEMENT HANDBOOK |
| 05/30111233 DC : 0 | BS EN 13245-2 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 2: PROFILES FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES |
| INCITS/ISO/IEC 19796-1 : 2008 | INFORMATION TECHNOLOGY - LEARNING, EDUCATION AND TRAINING - QUALITY MANAGEMENT, ASSURANCE AND METRICS - PART 1: GENERAL APPROACH |
| UNE-EN 61020-1:2011 | Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification |
| 08/30181473 DC : DRAFT JULY 2008 | BS EN 545 - DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS |
| PREN 14422 : DRAFT 2010 | CLAMP TYPE COUPLING ASSEMBLIES FOR LPG TRANSFER HOSES |
| PREN 50126-5 : DRAFT 2012 | RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 5: FUNCTIONAL SAFETY - SOFTWARE |
| BS EN 61192-2:2003 | Workmanship requirements for soldered electronic assemblies Surface-mount assemblies |
| PREN 13240 : DRAFT 2011 | ROOM HEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| 06/30159746 DC : 0 | BS EN 50503 - FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - STANDARD FOR THE INVENTORY CONTROL, MANAGEMENT, DECONTAMINATION AND/OR DISPOSAL OF ELECTRICAL EQUIPMENT AND INSULATING LIQUIDS CONTAINING PCBS |
| ISO 16798:2004 | Links of Grade 8 for use with slings |
| ISO 21138-2:2007 | Plastics piping systems for non-pressure underground drainage and sewerage Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 2: Pipes and fittings with smooth external surface, Type A |
| CSA Z15882 :2009 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS |
| 14/30273161 DC : 0 | BS EN 556-2 - STERILIZATION OF MEDICAL DEVICES - REQUIREMENTS FOR MEDICAL DEVICES TO BE DESIGNATED ''STERILE'' - PART 2: REQUIREMENTS FOR ASEPTICALLY PROCESSED MEDICAL DEVICES |
| 14/30254349 DC : 0 | BS ISO 50004 - ENERGY MANAGEMENT SYSTEMS - GUIDANCE FOR THE IMPLEMENTATION, MAINTENANCE AND IMPROVEMENT OF AN ENERGY MANAGEMENT SYSTEM |
| DD IEC TS 62666 : DRAFT OCT 2010 | GUIDELINES FOR THE INCLUSION OF DOCUMENTATION ASPECTS IN PRODUCT STANDARDS |
| ISO 26262-2:2011 | Road vehicles Functional safety Part 2: Management of functional safety |
| 04/30105620 DC : DRAFT OCT 2004 | EN 54-21 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 21: ALARM TRANSMISSION AND FAULT WARNING ROUTING EQUIPMENT |
| PREN 54-25 : DRAFT 2015 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS |
| 11/30191086 DC : 0 | BS ISO 12633-1 - HOT-FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| 12/30267824 DC : 0 | BS EN 1304 - CLAY ROOFING TILES AND FITTINGS - PRODUCT DEFINITIONS AND SPECIFICATIONS |
| PREN 12566-4 : DRAFT 2015 | SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 4: SEPTIC TANKS ASSEMBLED IN SITU FROM PREFABRICATED KITS |
| DIN EN 12004-1:2015-02 (Draft) | ADHESIVES FOR CERAMIC TILES - PART 1: REQUIREMENTS, ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, CLASSIFICATION AND MARKING |
| DIN EN 14545:2009-02 | TIMBER STRUCTURES - CONNECTORS - REQUIREMENTS |
| SAE J 20-1 : 2018 | COOLANT HOSE (SUPPLEMENT TO SAE J20 FOR GOVERNMENT USE REPLACING PART OF MS52130) |
| CEI UNI EN 45510-4-6 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4: BOILER AUXILIARIES - SECTION 6: FLUE GAS DESULPHURIZATION (DE-SOX) PLANT |
| CEI UNI ISO/IEC 20000-1 : 2012 | INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 1: SERVICE MANAGEMENT SYSTEM REQUIREMENTS |
| 13/30271116 DC : 0 | BS EN 1594 - GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS |
| UNE-EN ISO 13940:2016 | Health informatics - System of concepts to support continuity of care (ISO 13940:2015) |
| DD IEC/TS 62239:2003 | Process management for avionics. Preparation of an electronic components management plan |
| 11/30247470 DC : DRAFT MAY 2011 | BS EN 4710-001 - AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - TECHNICAL SPECIFICATION |
| ASTM F 2527 : 2016 : REDLINE | Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNS R31537) |
| ENV ISO 14253-2:2001 | Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipments - Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO/TS 14253-2:1999) |
| I.S. EN 13924-2:2014 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 2: MULTIGRADE PAVING GRADE BITUMENS |
| BS OHSAS 18001(1999) : 1999 AMD 14223 | OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - SPECIFICATION |
| 08/30181628 DC : DRAFT MAY 2008 | BS ISO/IEC 15423 - INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE SCANNER AND DECODER PERFORMANCE TESTING |
| DIN EN 16497-2:2017-07 | CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 2: BALANCED FLUE APPLICATIONS |
| 07/30156704 DC : DRAFT DEC 2007 | BS ISO GUIDE 64 - GUIDE FOR ADDRESSING ENVIRONMENTAL ISSUES IN PRODUCT STANDARDS |
| CSA ISO 11134 : 0 | STERILIZATION OF HEALTH CARE PRODUCTS - REQUIREMENTS FOR VALIDATION AND ROUTINE CONTROL - INDUSTRIAL MOIST HEAT STERILIZATION |
| BS ISO 10014:2006 | Quality management. Guidelines for realizing financial and economic benefits |
| 03/311007 DC : DRAFT JUNE 2003 | EN 13291-2 - SPACE PRODUCT ASSURANCE - GENERAL REQUIREMENTS - PART 2: QUALITY ASSURANCE |
| BS IEC 62138 : 2004 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT FOR SAFETY - SOFTWARE ASPECTS FOR COMPUTER-BASED SYSTEMS PERFORMING CATEGORY B OR C FUNCTIONS |
| BS ISO 6966-2:2014 | Aircraft ground equipment. Basic requirements Safety requirements |
| 11/30247867 DC : 0 | BS EN 13924-2 - BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL BITUMEN - PART 2: MULTIGRADE BITUMENOUS BINDERS |
| ISO 23460:2011 | Space projects — Programme management — Dependability assurance requirements |
| UNE-ISO 10004:2015 | Quality managemen. Customer satisfaction. Guidelines for monitoring and measuring |
| AAMI ISO 10993-1:2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS |
| 13/30276237 DC : 0 | BS EN 15348 - PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(ETHYLENE TEREPHTHALATE) (PET) RECYCLATES |
| BS EN 9320:2014 | Aerospace series. Programme Management. General guidelines for acquisition and supply of open systems |
| 13/30291609 DC : 0 | BS EN 60966-1 - RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 50556:2011 | ROAD TRAFFIC SIGNAL SYSTEMS |
| 15/30329382 DC : 0 | BS EN 9120 - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE DISTRIBUTORS |
| 11/30240459 DC : 0 | BS EN 13602 - COPPER AND COPPER ALLOYS - DRAWN, ROUND COPPER WIRE FOR THE MANUFACTURE OF ELECTRICAL CONDUCTORS |
| UNE-EN ISO 15175:2011 | Soil quality - Characterization of soil related to groundwater protection (ISO 15175:2004) |
| DIN EN 15650:2010-09 | Ventilation for buildings - Fire dampers |
| 01/205488 DC : DRAFT AUG 2001 | IEC 61318 ED.2 - LIVE WORKING - QUALITY ASSURANCE PLANS APPLICABLE TO TOOLS, DEVICES AND EQUIPMENT |
| I.S. EN 62566:2014 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - DEVELOPMENT OF HDL-PROGRAMMED INTEGRATED CIRCUITS FOR SYSTEMS PERFORMING CATEGORY A FUNCTIONS |
| 12/30251858 DC : 0 | BS ISO 4074 - NATURAL RUBBER LATEX MALE CONDOMS - REQUIREMENTS AND TEST METHODS |
| ASTM F 3050 : 2017 | Standard Guide for Conformity Assessment of Personal Protective Clothing and Equipment |
| BS IEC 61189-5-2 : 2015 | TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-2: GENERAL TEST METHODS FOR MATERIALS AND ASSEMBLIES - SOLDERING FLUX FOR PRINTED BOARD ASSEMBLIES |
| DIN EN 15530:2008-06 | Aluminium and aluminium alloys - Environmental aspects of aluminium products - General guidelines for their inclusion in standards |
| 12/30257889 DC : 0 | BS EN 206 - CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| 17/30344317 DC : 0 | BS ISO 49 AMENDMENT 1 - MALLEABLE CAST IRON FITTINGS THREADED TO ISO 7-1 |
| ISO 19258:2005 | Soil quality Guidance on the determination of background values |
| BS EN 61209:1999 | Maritime navigation and radiocommunication equipment and systems. Integrated bridge systems (IBS). Operational and performance requirements, methods of testing and required test results |
| 03/105148 DC : DRAFT MAR 2003 | PREN 14620-1 - DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED STEEL TANKS FOR THE STORAGE OF REFRIGERATED, LIQUEFIED GASES WITH OPERATING TEMPERATURES BETWEEN -5 DEGREES C AND -165 DEGREES C - PART 1: GENERAL |
| BS EN 16590-4:2014 | Tractors and machinery for agriculture and forestry. Safety-related parts of control systems Production, operation, modification and supporting processes |
| 08/30172148 DC : DRAFT MAY 2008 | BS ISO 28278-1 - GLASS IN BUILDING - GLASS PRODUCTS FOR STRUCTURAL SEALANT GLAZING - PART 1: SUPPORTED AND UNSUPPORTED MONOLITHIC AND MULTIPLE GLAZING |
| BS EN 45510-4-9:2000 | Guide for the procurement of power station equipment. Boiler auxiliaries Sootblowers - Section 9: Sootblowers |
| 16/30343033 DC : 0 | BS ISO/IEC 17021-3 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEMS |
| PD CEN/TR 15840:2009 | Evaluation of conformity of fly ash for concrete. Guidelines for the application of EN 450-2 |
| DD CEN/TS 15511:2008 | Postal services. Quality of service. Information available on postal services |
| BS ISO/IEC 10967-1:2012 | Information technology. Language independent arithmetic Integer and floating point arithmetic |
| BS ISO 28598-2:2017 | Acceptance sampling procedures based on the allocation of priorities principle (APP) Coordinated single sampling plans for acceptance sampling by attributes |
| 11/30246867 DC : 0 | BS EN 1400 - CHILD USE AND CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - SAFETY REQUIREMENTS AND TEST METHODS |
| BS EN 16914:2017 | Aluminium and aluminium alloys. Hot-rolled armour plates in weldable aluminium alloy. Technical delivery conditions |
| 04/30101211 DC : DRAFT APR 2004 | ISO 11607-1 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
| BS EN 2883:2009 | Aerospace series. Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315°C |
| 14/30310858 DC : 0 | BS EN 60794-4-20 - OPTICAL FIBRE CABLES - PART 4-20: AERIAL OPTICAL CABLES ALONG ELECTRICAL POWER LINES - FAMILY SPECIFICATION FOR ADSS (ALL DIELECTRIC SELF SUPPORTED) OPTICAL CABLES |
| BIP 2073 : 2005 | QUALITY PATIENT CARE IN HOSPITALS |
| 02/713626 DC : DRAFT NOV 2002 | PREN 10021 - GENERAL TECHNICAL DELIVERY REQUIREMENTS FOR STEEL PRODUCTS |
| 03/305679 DC : DRAFT MAR 2003 | EN 13481-8 - RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 8: FASTENING SYSTEMS FOR TRACK WITH HEAVY AXLE LOADS |
| BS EN 14528 : 2015 | BIDETS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| ABS 0063 : 2018 COR 2018 | RULES FOR BUILDING AND CLASSING FACILITIES ON OFFSHORE INSTALLATIONS |
| ISO/IEC/IEEE 15289:2017 | Systems and software engineering Content of life-cycle information items (documentation) |
| 14/30297459 DC : 0 | BS EN 15012 - PLASTICS PIPING SYSTEMS - BURIED AND ABOVE GROUND PIPING COMPONENTS FOR NON PRESSURE SOIL AND WASTE DISCHARGE WITHIN THE BUILDING STRUCTURE - REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR PIPES AND FITTINGS |
| ISO 19372:2015 | Microturbines applications — Safety |
| S.R. CLC/TS 50537-4:2010 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 4: GAS AND LIQUID ACTUATED (BUCHHOLZ) RELAY FOR LIQUID IMMERSED TRANSFORMERS AND REACTORS WITH CONSERVATOR FOR RAIL VEHICLES |
| UNE-EN 16747:2016 | Maritime and port security services |
| BS ISO 16192:2017 | Space systems. Experience gained in space projects (lessons learned). Principles and guidelines |
| BS ISO 28002:2011 | Security management systems for the supply chain. Development of resilience in the supply chain. Requirements with guidance for use |
| 02/710858 DC : DRAFT SEP 2002 | BS EN 14532-1 - WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 1: PRIMARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS |
| DIN EN 74-2:2009-01 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures |
| 15/30256504 DC : 0 | BS EN 60034-23 ED 1.0 - ROTATING ELECTRICAL MACHINES - PART 23: REPAIR, OVERHAUL AND RECLAMATION |
| 07/30163668 DC : 0 | BS EN 12839 - PRECAST CONCRETE PRODUCTS - ELEMENTS OF FENCES |
| BS ISO 17680:2015 | Tourism and related services. Thalassotherapy. Service requirements |
| 06/30156812 DC : 0 | BS EN 15593 - PACKAGING. MANAGEMENT OF HYGIENE IN THE PRODUCTION OF PACKAGING FOR FOODSTUFFS - REQUIREMENTS |
| 12/30259903 DC : 0 | BS ISO/IEC 15504-6 - INFORMATION TECHNOLOGY - PROCESS ASSESSMENT - PART 6: AN EXEMPLAR SYSTEM LIFE CYCLE PROCESS ASSESSMENT MODEL |
| BS IEC 62246-2 : 2007 | REED CONTACT UNITS - PART 2: HEAVY-DUTY REED SWITCHES |
| 03/109124 DC : DRAFT JUNE 2003 | IEC 61400-1 ED.3.0 - WIND TURBINES - PART 1: DESIGN REQUIREMENTS |
| 10/30208983 DC : 0 | BS ISO 13053-2 - QUANTITATIVE METHODS IN PROCESS IMPROVEMENT - SIX SIGMA - PART 2: TOOLS AND TECHNIQUES |
| DIN EN 54-27:2015-05 | Fire detection and fire alarm systems - Part 27: Duct smoke detectors |
| 05/30133969 DC : DRAFT MAY 2005 | |
| SAE AS 7106 : 2017 | NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) QUALITY PROGRAM REQUIREMENTS |
| CEI UNI EN 45510-4-9 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-9: BOILER AUXILIARIES - SOOTBLOWERS |
| ISO/IEC TR 20000-12:2016 | Information technology Service management Part 12: Guidance on the relationship between ISO/IEC 20000-1:2011 and service management frameworks: CMMI-SVC |
| BS EN 54-26:2015 | Fire detection and fire alarm systems Carbon monoxide detectors. Point detectors |
| 16/30317155 DC : 0 | BS EN ISO 19258 - SOIL QUALITY - GUIDANCE ON THE DETERMINATION OF BACKGROUND VALUES |
| BS EN 15267-2:2009 | Air quality. Certification of automated measuring systems Initial assessment of the AMS manufacturer\'s quality management system and post certification surveillance for the manufacturing process |
| PD CEN ISO/TR 14969:2005 | Medical devices. Quality management systems. Guidance on the application of ISO 13485:2003 |
| BS ISO 25119-4:2010 | Tractors and machinery for agriculture and forestry. Safety-related parts of control systems Production, operation, modification and supporting processes |
| DIN EN 15824:2015-11 (Draft) | SPECIFICATIONS FOR EXTERNAL RENDERS AND INTERNAL PLASTERS BASED ON ORGANIC BINDERS |
| BIP 2222 : 2012 | COMPLAINTS MANAGEMENT - TURNING NEGATIVES INTO POSITIVES (INCLUDING BS ISO 10002:2004 AND BS ISO 10003:2007) |
| NF EN ISO/IEC 80079-34 : 2011 | EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE |
| UNI EN 16114 : 2011 | MANAGEMENT CONSULTANCY SERVICES |
| NF EN ISO 13408-3 : 2011 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 3: LYOPHILIZATION |
| CSA ISO 9000-2 : 0 | QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - GENERIC GUIDELINES FOR THE APPLICATION OF ISO 9001, ISO 9002, AND ISO 9003 |
| EN 1254-6:2012 | Copper and copper alloys - Plumbing fittings - Part 6: Fittings with push-fit ends |
| BS EN ISO 28765:2016 | Vitreous and porcelain enamels. Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges |
| EN 1254-1:1998 | Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
| 06/30151661 DC : 0 | BS EN ISO 3452-6 - NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 6: PENETRANT TESTING AT TEMPERATURES LOWER THAN 10 DEGREES C |
| 13/30268273 DC : 0 | BS EN 14915 - SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| DEFSTAN 05-91/2(1995) : 1995 | QUALITY SYSTEM REQUIREMENTS FOR DESIGN/DEVELOPMENT, PRODUCTION, INSTALLATION AND SERVICING |
| DIN ISO 15226:2017-03 | TECHNICAL PRODUCT DOCUMENTATION - LIFE CYCLE MODEL AND ALLOCATION OF DOCUMENTS (ISO 15226:1999) |
| UNI CEI ISO/IEC 20000-1 : 2012 | INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 1: SERVICE MANAGEMENT SYSTEM REQUIREMENTS |
| 13/30292534 DC : 0 | BS EN 60794-4-10 ED 2.0 - OPTICAL FIBRE CABLES - PART 4-10: FAMILY SPECIFICATION - OPGW (OPTICAL GROUND WIRES) ALONG ELECTRICAL POWER LINES |
| PD ISO/IEC TR 20000-10:2015 | Information technology. Service management Concepts and terminology |
| PD IEC/TR 62001-4:2016 | High-voltage direct current (HVDC) systems. Guidance to the specification and design evaluation of AC filters Equipment |
| BS ISO 9635-1:2014 | Agricultural irrigation equipment. Irrigation valves General requirements |
| 07/30169285 DC : 0 | BS ISO 8336 - FIBRE-CEMENT FLAT SHEETS - PRODUCT SPECIFICATION AND TEST METHODS |
| ISO 7240-25:2010 | Fire detection and fire alarm systems — Part 25: Components using radio transmission paths |
| DIN EN 15512:2010-09 | Steel static storage systems - Adjustable pallet racking systems - Principles for structural design |
| CSA ISO 11137 : 1998 | STERILIZATION OF HEALTH CARE PRODUCTS - REQUIREMENTS FOR VALIDATION AND ROUTINE CONTROL - RADIATION STERILIZATION |
| 14/30259865 DC : 0 | BS ISO/IEC 33063 - INFORMATION TECHNOLOGY - PROCESS ASSESSMENT - PROCESS ASSESSMENT MODEL FOR SOFTWARE TESTING |
| ISO/TS 21003-7:2008 | Multilayer piping systems for hot and cold water installations inside buildings Part 7: Guidance for the assessment of conformity |
| UNI EN 15683-2 : 2014 | GLASS IN BUILDING - THERMALLY TOUGHENED SODA LIME SILICATE CHANNEL SHAPED SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD |
| TR 102 783 : 1.1.2 | HUMAN FACTORS (HF); WEB-BASED GUIDELINE AND TUTORIAL SYSTEM FOR REAL-TIME COMMUNICATION SERVICES; QOE (QUALITY OF EXPERIENCE) EXPRESSED IN QOS (QUALITY OF SERVICE) TERMS; SUPPORTING AND MAINTENANCE INFORMATION |
| BS EN 62619:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes. Safety requirements for secondary lithium cells and batteries, for use in industrial applications |
| DIN ISO 2020-2:1999-01 | AEROSPACE - PREFORMED FLEXIBLE STEEL WIRE ROPE FOR AIRCRAFT CONTROLS - PART 2: TECHNICAL SPECIFICATION |
| ASTM F 2071 : 2000 : R2006 | Standard Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic |
| 04/30048301 DC : DRAFT MAY 2004 | BS EN ISO 11137-1 - STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| BS EN 4710-01:2015 | Aerospace series. Quick release fastening systems for non-structural applications Technical specification |
| BS ISO 18385:2016 | Minimizing the risk of human DNA contamination in products used to collect, store and analyze biological material for forensic purposes. Requirements |
| BS ISO 29990:2010 | Learning services for non-formal education and training. Basic requirements for service providers |
| UNE-EN 124-3:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys |
| EN ISO 3452-2:2013 | Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2013) |
| PD ISO/TS 15998-2:2012 | Earth-moving machinery. Machine control systems (MCS) using electronic components Use and application of ISO 15998 |
| 10/30234604 DC : 0 | BS EN 14424 - HOSE FITTINGS WITH SCREWED FERRULES |
| ASTM F 2924 : 2014 : REDLINE | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
| BS EN 61160:2005 | Design review |
| 09/30207868 DC : 0 | BS EN 13859-2 - FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 2: UNDERLAYS FOR WALLS |
| I.S. EN 15344:2007 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYETHYLENE (PE) RECYCLATES |
| UNE-CEN/CLC ISO/IEC/TS 17021-3:2016 | Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 3: Competence requirements for auditing and certification of quality management systems (ISO/IEC/TS 17021-3:2013) |
| I.S. ISO 10007:2005 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR CONFIGURATION MANAGEMENT |
| DIN EN 13674-2:2016-05 (Draft) | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| I.S. ISO 10002:2005 | QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR COMPLAINTS HANDLING IN ORGANIZATIONS |
| BS PD ISO/IEC TS 17021-3 : 2013 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEMS |
| PD CEN/TS 1565-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene-copolymer blends (SAN+PVC) Guidance for the assessment of conformity |
| BS ISO 22241-3:2017 | Diesel engines. NOx reduction agent AUS 32 Handling, transportation, and storage |
| DIN ISO 2859-3:2007-10 | SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 3: SKIP-LOT SAMPLING PROCEDURES |
| 14/30255138 DC : 0 | BS EN ISO 11607-2:2006/A1 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES |
| ANSI/AAMI/ISO 11607-1:2006/(R)2015 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS, AND PACKAGING SYSTEMS |
| BS ISO 12679 : 2011 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING |
| 17/30356728 DC : 0 | BS EN 12261 - GAS METERS - TURBINE GAS METERS |
| UNE-EN 13616-2:2016 | Overfill prevention devices for static tanks for liquid fuels - Part 2: Overfill prevention devices without a closure device |
| DIN EN 15389:2008-10 | INDUSTRIAL VALVES - PERFORMANCE CHARACTERISTICS OF THERMOPLASTIC VALVES WHEN USED AS CONSTRUCTION PRODUCTS |
| 15/30317602 DC : 0 | BS ISO 15541 - SHIPS AND MARINE TECHNOLOGY - FIRE RESISTANCE OF NON-METALLIC HOSE ASSEMBLIES AND NON-METALLIC COMPENSATORS - REQUIREMENTS FOR THE TEST BENCH |
| I.S. EN ISO 3183:2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| BIS IS/ISO 50001 : 2011(R2017) | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| IPC-1401 CHINESE : 2017 | SUPPLY CHAIN SOCIAL RESPONSIBILITY MANAGEMENT SYSTEM GUIDANCE |
| UNE-EN 50575:2015 | Power, control and communication cables - Cables for general applications in construction works subject to reaction to fire requirements |
| 13/30277600 DC : 0 | BS ISO 37500 - GUIDANCE ON OUTSOURCING |
| PREN 13251 : DRAFT 2015 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN EARTHWORKS, FOUNDATIONS AND RETAINING STRUCTURES |
| 10/30217464 DC : 0 | BS ISO 28002 - SECURITY MANAGEMENT SYSTEMS FOR THE SUPPLY CHAIN - DEVELOPMENT OF RESILIENCY IN THE SUPPLY CHAIN - REQUIREMENTS WITH GUIDANCE FOR USE |
| BS EN 62366-1:2015 | Medical devices Application of usability engineering to medical devices |
| 05/30086722 DC : 0 | EN 15329 - RAILWAY APPLICATIONS - BRAKING - BRAKE BLOCK HOLDER AND BRAKE SHOE KEY FOR RAILWAY VEHICLES |
| I.S. EN ISO 50001:2011 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE (ISO 50001:2011) |
| 12/30275045 DC : 0 | BS EN 60076-15 - POWER TRANSFORMERS - PART 15: GAS-FILLED POWER TRANSFORMER |
| 04/30117386 DC : DRAFT JUL 2004 | EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| 07/30160564 DC : 0 | BS ISO/IEC 15288 - SYSTEMS AND SOFTWARE ENGINEERING - SOFTWARE LIFE CYCLE PROCESSES |
| BS EN 15012 : 2008 | PLASTICS PIPING SYSTEMS - SOIL AND WASTE DISCHARGE SYSTEMS WITHIN THE BUILDING STRUCTURE - PERFORMANCE CHARACTERISTICS FOR PIPES, FITTINGS AND THEIR JOINTS |
| 07/30150249 DC : 0 | BS EN ISO 23936-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS |
| 12/30258438 DC : 0 | BS EN 61190-1-2 AMD 1ED.2 - ATTACHMENT MATERIALS FOR ELECTRONIC ASSEMBLY - PART 1-2: REQUIREMENTS FOR SOLDERING PASTES FOR HIGH-QUALITY INTERCONNECTS IN ELECTRONICS ASSEMBLY |
| BS EN 12273:2008 | Slurry surfacing. Requirements |
| 15/30330403 DC : 0 | BS EN 50126-1 - RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 1: GENERIC RAMS PROCESS |
| 11/30233262 DC : 0 | BS EN 1871 - ROAD MARKING MATERIALS - PAINT, THERMOPLASTIC AND COLD PLASTIC MATERIALS - SPECIFICATIONS |
| BS EN 1457-1:2012 | Chimneys. Clay/ceramic flue liners Flue liners operating under dry conditions. Requirements and test methods |
| 00/241939 DC : DRAFT MAY 2000 | PREN 50129 - RAILWAY APPLICATIONS - SAFETY RELATED ELECTRONIC SYSTEMS FOR SIGNALLING |
| ASTM F 961 : 2014 : REDLINE | Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035) |
| 11/30240152 DC : 0 | BS ISO 18601 - PACKAGING AND THE ENVIRONMENT - GENERAL REQUIREMENTS FOR THE USE OF ISO STANDARDS IN THE FIELD OF PACKAGING AND THE ENVIRONMENT |
| 16/30338120 DC : 0 | BS EN 15382 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE |
| 96/108458 DC : DRAFT NOV 1996 | PREN 12650-1 - BUILDING HARDWARE - POWERED PEDESTRIAN DOORS - PART 1: PRODUCT REQUIREMENTS AND TEST METHODS |
| CSA ISO/IEC 10967-1:14 (R2019) | Information technology - Language independent arithmetic - Part 1: Integer and floating point arithmetic (Adopted ISO/IEC 10967-1:2012, second edition, 2012-07-15) |
| 98/402025 DC : DRAFT JAN 1998 | BS ISO 13448-1 - ACCEPTANCE SAMPLING PROCEDURES BASED ON THE ALLOCATION-OF-PRIORITIES PRINCIPLE (APP) - PART 1: GUIDE TO THE APP APPROACH |
| 14/30297213 DC : 0 | BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
| DIN EN ISO 13408-3:2011-09 | Aseptic processing of health care products - Part 3: Lyophilization (ISO 13408-3:2006) |
| I.S. EN 15221-5:2011 | FACILITY MANAGEMENT - PART 5: GUIDANCE ON FACILITY MANAGEMENT |
| 16/30336759 DC : 0 | BS EN 50290-2-20 - COMMUNICATION CABLES - PART 2-20: COMMON DESIGN RULES AND CONSTRUCTION - GENERAL |
| DIN EN 16747:2015-11 | Maritime and port security services |
| NF EN 60794-4-10 : 2007 | OPTICAL FIBRE CABLES - PART 4-10: AERIAL OPTICAL CABLES ALONG ELECTRICAL POWER LINES - FAMILY SPECIFICATION FOR OPGW (OPTICAL GROUND WIRES) |
| BS ISO 37001:2016 | Anti-bribery management systems. Requirements with guidance for use |
| DIN EN 124-2:2015-09 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 2: GULLY TOPS AND MANHOLE TOPS MADE OF CAST IRON |
| ISO 18468:2017 | Ductile iron fittings, accessories and their joints and valves — Epoxy coating |
| BS ISO 14186:2013 | Air cargo. Fire containment covers. Design, performance and testing requirements |
| DD IEC TS 62564-1 : DRAFT SEP 2011 | PROCESS MANAGEMENT FOR AVIONICS - AEROSPACE QUALIFIED ELECTRONIC COMPONENTS (AQEC) - PART 1: INTEGRATED CIRCUITS AND DISCRETE SEMICONDUCTORS |
| UNI EN 15221-5 : 2011 | FACILITY MANAGEMENT - PART 5: GUIDANCE ON FACILITY MANAGEMENT PROCESSES |
| UNI EN 14636-2 : 2010 | PLASTICS PIPING SYSTEMS FOR NON- PRESSURE DRAINAGE AND SEWERAGE - POLYESTER RESIN CONCRETE (PRC) - PART 2: MANHOLES AND INSPECTION CHAMBERS |
| BS ISO 2531:2009 | Ductile iron pipes, fittings, accessories and their joints for water applications |
| CSA Z11137-3 : 2007 : R2016 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS |
| PD ISO/TS 22003:2013 | Food safety management systems — Requirements for bodies providing audit and certification of food safety management systems |
| 04/30079743 DC : DRAFT APR 2004 | ISO 15378 - PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2000 WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP) |
| PREN 50556 : DRAFT 2010 | ROAD TRAFFIC SIGNAL SYSTEMS |
| DD CEN/TS 12200-2:2003 | Plastics rainwater piping systems for above ground external use. Unplasticized poly (vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
| 13/30255316 DC : 0 | BS EN 13924-1 - BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS |
| 04/30125694 DC : DRAFT NOV 2004 | EN 15088 - ALUMINIUM AND ALUMINIUM ALLOYS - STRUCTURAL PRODUCTS FOR CONSTRUCTION WORKS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| API 2SF : 2013 | MANUFACTURE OF STRUCTURAL STEEL FORGINGS FOR PRIMARY OFFSHORE APPLICATIONS |
| BS IEC 61112:1992 | Blankets of insulating material for electrical purposes |
| DEFSTAN 61-5(PT6)/6(2009) : 2009 | NOMINAL 12 V AND 24 V DC ELECTRICAL SYSTEMS IN MILITARY PLATFORMS |
| PD ISO/IEC Guide 53:2005 | Conformity assessment. Guidance on the use of an organization\'s quality management system in product certification |
| BS EN 3840:2007 | Aerospace series. Paints and varnishes. Technical specification |
| EN 12079-1:2006 | Offshore containers and associated lifting sets - Part 1: Offshore container - Design, manufacture and marking |
| BS EN 60896-22:2004 | Stationary lead-acid batteries Valve regulated types. Requirements |
| NSF 363 : 2016 | GOOD MANUFACTURING PRACTICES (GMP) FOR PHARMACEUTICAL EXCIPIENTS |
| BS EN 15381:2008 | Geotextiles and geotextile-related products. Characteristics required for use in pavements and asphalt overlays |
| CSA ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| CSA ISO 10005 : 2005 : R2010 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY PLANS |
| 07/30169807 DC : 0 | BS ISO/IEC 16326 - SOFTWARE ENGINEERING - LIFE CYCLE PROCESSES - PROJECT MANAGEMENT |
| BS ISO 14004 : 2004 | ENVIRONMENTAL MANAGEMENT SYSTEMS - GENERAL GUIDELINES ON PRINCIPLES, SYSTEMS AND SUPPORTING TECHNIQUES |
| CSA ISO TR 14969 : 2005 : R2010 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
| PREN 15346 : DRAFT 2013 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES |
| BS ISO 21247:2005 | Combined accept-zero sampling systems and process control procedures for product acceptance |
| 17/30334569 DC : 0 | BS ISO 14080 - GREENHOUSE GAS MANAGEMENT AND RELATED ACTIVITIES - FRAMEWORK AND PRINCIPLES FOR METHODOLOGIES ON CLIMATE ACTIONS |
| CSA ISO 10005 : 2005 : R2015 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY PLANS |
| UNE-EN 1254-6:2013 | Copper and copper alloys - Plumbing fittings - Part 6: Fittings with push-fit ends |
| PREN 12261 : DRAFT 2017 | GAS METERS - TURBINE GAS METERS |
| ISO 19443:2018 | Quality management systems — Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear safety (ITNS) |
| CSA ISO/IEC 10967-2 : 2002 : R2016 | INFORMATION TECHNOLOGY - LANGUAGE INDEPENDENT ARITHMETIC - PART 2: ELEMENTARY NUMERICAL FUNCTIONS |
| CSA ISO/IEC 14598-4 :2002 | SOFTWARE ENGINEERING - PRODUCT EVALUATION - PART 4: PROCESS FOR ACQUIRERS |
| 04/30107387 DC : DRAFT JUN 2004 | ISO/IEC GUIDE 53 - CONFORMITY ASSESSMENT - GUIDANCE ON THE USE OF AN ORGANIZATION'S QUALITY MANAGEMENT SYSTEM IN PRODUCT CERTIFICATION |
| ASTM F 2229 : 2012 : REDLINE | Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108) |
| UNE-EN 15224:2017 | Quality management systems - EN ISO 9001:2015 for healthcare |
| IPC 1401 : 2017 | SUPPLY CHAIN SOCIAL RESPONSIBILITY MANAGEMENT SYSTEM GUIDANCE |
| EN 13601:2013 | Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
| 09/30185830 DC : DRAFT FEB 2009 | BS EN 15887 - BUILDING HARDWARE - UNCONTROLLED DOOR CLOSING DEVICES FOR SINGLE ACTION DOORS - REQUIREMENTS AND TEST METHODS |
| BS ISO 21927-1:2008 | Smoke and heat control systems Specification for smoke barriers |
| I.S. EN 2883:2009 | AEROSPACE SERIES - NUTS, HEXAGONAL, SELF-LOCKING, WITH COUNTERBORE AND CAPTIVE WASHER, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| BS EN ISO 19011:2011 | Guidelines for auditing management systems |
| PREN 50239 : DRAFT 2016 | RAILWAY APPLICATIONS - RADIO REMOTE CONTROL SYSTEM OF TRACTION VEHICLE FOR SHUNTING TRAFFIC |
| DD CEN ISO/TS 21003-7 : 2008 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| 04/30110330 DC : DRAFT MAR 2004 | EN 14889-1 - FIBRES FOR CONCRETE - PART 1: STEEL FIBRES - DEFINITION, SPECIFICATIONS AND CONFORMITY |
| CSA Z245.6 : 2006 : R2016 | COILED ALUMINUM LINE PIPE AND ACCESSORIES |
| 04/30101215 DC : DRAFT APR 2004 | ISO 11607-2 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES |
| UNI EN 15285 : 2008 | AGGLOMERATED STONE - MODULAR TILES FOR FLOORING AND STAIRS (INTERNAL AND EXTERNAL) |
| UNE-EN 15102:2008 | Decorative wallcoverings - Roll and panel form products |
| 97/402277 DC : DRAFT APR 1997 | PREN 45001 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| UNI EN 1013 : 2015 | LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| PD 0020:2002 | A Guide to computer-based management systems |
| PREN 4636 : 200P1 | AEROSPACE SERIES - SCREWS, 100 DEGREE COUNTERSUNK HEAD, SIX LOBE RECESS, SHORT THREAD, IN TITANIUM ALLOY TI-P64001, WITH ALUMINIUM PIGMENTED COATING - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| 02/202972 DC : 0 | IEC 60832-1. ED.2 - LIVE WORKING - INSULATING STICKS AND ATTACHABLE UNIVERSAL DEVICES (FITTINGS) - PART 1: INSULATING STICKS WITH PERMANENTLY ATTACHED FITTINGS |
| I.S. EN 19694-1:2016 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 1: GENERAL ASPECTS |
| AQAP 2110 : 2016 | NATO QUALITY ASSURANCE REQUIREMENTS FOR DESIGN, DEVELOPMENT AND PRODUCTION |
| PREN 3840 : 200P2 | AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
| CSA C61400-3 : 2011 | WIND TURBINES - PART 3: DESIGN REQUIREMENTS FOR OFFSHORE WIND TURBINES |
| ISO 16355-5:2017 | Applications of statistical and related methods to new technology and product development process — Part 5: Solution strategy |
| UNI EN 12101-7 : 2011 | SMOKE AND HEAT CONTROL SYSTEMS - PART 7: SMOKE DUCT SECTIONS |
| DEFSTAN 05-94/1(1991) : 1991 | GUIDANCE ON QUALITY SYSTEM REQUIREMENTS FOR THE IMPLEMENTATION OF DEFSTANS 05-91, 05-92, AND 05-93 |
| SAE AS 6453 : 2013 | FIRE CONTAINMENT COVER - DESIGN, PERFORMANCE, AND TESTING REQUIREMENTS |
| DD ISO/PAS 30003:2008 | Ships and marine technology. Ship recycling management systems. Requirements for bodies providing audit and certification of ship recycling management |
| BS ISO 15840:2004 | Ships and marine technology. Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications |
| PD 6637:1999 | Nuclear instrumentation. A review of the application of IEC 60880:1986 |
| S.R. CEN/TS 14541:2013 | PLASTICS PIPES AND FITTINGS - CHARACTERISTICS FOR UTILISATION OF NON-VIRGIN PVC-U, PP AND PE MATERIALS |
| EN 14527:2016 | Shower trays for domestic purposes |
| CSA ISO/IEC 15426-1 : 2007 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE VERIFIER CONFORMANCE SPECIFICATIONS - PART 1: LINEAR SYMBOLS |
| DD ISO/PAS 28001:2006 | Security management systems for the supply chain. Best practices for implementing supply chain security. Assessments and plans |
| UNE-ISO/IEC 17021-3:2018 | Conformity assessment -- Requirements for bodies providing audit and certification of management systems -- Part 3: Competence requirements for auditing and certification of quality management systems |
| CEI EN 50206-1 : 2011 | RAILWAY APPLICATIONS - ROLLING STOCK - PANTOGRAPHS: CHARACTERISTICS AND TESTS - PART 1: PANTOGRAPHS FOR MAIN LINE VEHICLES |
| CLC/TR 50503:2010 | Guidelines for the inventory control, management, decontamination and/or disposal of electrical equipment and insulating liquids containing PCBs |
| 05/30081246 DC : DRAFT JUN 2005 | BS ISO/IEC 25030 - SOFTWARE ENGINEERING - SOFTWARE QUALITY REQUIREMENTS AND EVALUATION (SQUARE) - QUALITY REQUIREMENTS |
| BS EN 15267-1:2009 | Air quality. Certification of automated measuring systems General principles |
| I.S. EN 50215:2009 | RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE |
| 15/30291072 DC : 0 | BS EN 54-28 - FIRE DETECTION AND FIRE ALARM SYSTEM - PART 28: NON-RESETTABLE LINE TYPE HEAT DETECTORS |
| CAN/CSA-ISO/IEC 15426-2:16 | Information technology - Automatic identification and data capture techniques - Bar code verifier conformance specification - Part 2: Two-dimensional symbols (Adopted ISO/IEC 15426-2:2015, second edition, 2015-08-01) |
| I.S. EN ISO 16904:2016 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND TESTING OF LNG MARINE TRANSFER ARMS FOR CONVENTIONAL ONSHORE TERMINALS (ISO 16904:2016) |
| BS ISO 10007:2017 | Quality management. Guidelines for configuration management |
| BS 5750-0.2(1987) : 1987 | QUALITY SYSTEMS - PRINCIPAL CONCEPTS AND APPLICATIONS - GUIDE TO QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS |
| CSA ISO/IEC 15288 : 2009 | SYSTEMS AND SOFTWARE ENGINEERING - SYSTEM LIFE CYCLE PROCESSES |
| PD ISO/TR 24679-2:2017 | Fire safety engineering. Performance of structure in fire Example of an airport terminal |
| BS 7229-1(1991) : AMD 7922 | GUIDE TO QUALITY SYSTEMS AUDITING - AUDITING |
| AAMI ISO 13408-1 : 2008 : INC : AMD 1 : 2013 : R201100 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS |
| BS ISO 20683-2:2004 | Aircraft ground equipment. Design, test and maintenance for towbarless towing vehicles (TLTV) interfaced with nose-landing gear Regional aircraft |
| CSA Z741 :2012 | GEOLOGICAL STORAGE OF CARBON DIOXIDE |
| CSA ISO/IEC 15504-3 : 2005 : R2015 | INFORMATION TECHNOLOGY - PROCESS ASSESSMENT - PART 3: GUIDANCE ON PERFORMING AN ASSESSMENT |
| UNE-EN ISO 15378:2016 | Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2008, with reference to Good Manufacturing Practice (GMP) (ISO 15378:2015) |
| ISO/IEC 20741:2017 | Systems and software engineering — Guideline for the evaluation and selection of software engineering tools |
| IEC 62155:2003 | Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V |
| PREN 494 : DRAFT 2010 | FIBRE-CEMENT PROFILED SHEETS AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS |
| CSA Z741 : 2012 : R2017 | GEOLOGICAL STORAGE OF CARBON DIOXIDE |
| UNE-EN 16222:2013 | Cathodic protection of ship hulls |
| ISO/TR 25108:2006 | Non-destructive testing Guidelines for NDT personnel training organizations |
| 16/30343249 DC : 0 | BS EN 179 - BUILDING HARDWARE - EMERGENCY EXIT DEVICES OPERATED BY A LEVER HANDLE OR PUSH PAD, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| DIN EN 16271:2013-03 | Value management - Functional expression of the need and functional performance specification - Requirements for expressing and validating the need to be satisfied within the process of purchasing or obtaining a product |
| DIN EN 15267-1:2009-07 | Air quality - Certification of automated measuring systems - Part 1: General principles |
| CSA ISO 9004 : 2009 : R2015 | MANAGING FOR THE SUSTAINED SUCCESS OF AN ORGANIZATION - A QUALITY MANAGEMENT APPROACH |
| CSA ISO TR 10013 : 2001 | GUIDELINES FOR QUALITY MANAGEMENT SYSTEM DOCUMENTATION |
| CSA ISO 10005 : 2005 : R2010 : FR | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY PLANS |
| PREN 9104-003 : 200P2 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 003: REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM (AQMS) - AUDITOR TRAINING AND QUALIFICATION |
| PREN 9134 : 200P1 | AEROSPACE SERIES - QUALITY SYSTEMS - SUPPLY CHAIN RISK MANAGEMENT GUIDELINE |
| PREN 9103 : 200P2 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - VARIATION MANAGEMENT OF KEY CHARACTERISTICS |
| CSA C1325 : 1999 : R2011 | INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| ONORM B 5102 : 2014 | PURIFYING INSTALLATIONS FOR RAINWATER FROM TRAFFIC AND PARKING AREAS (VSS) |
| ISO 10794:2011 | Space systems Programme management Material, mechanical parts and processes |
| ISO 7240-14:2013 | Fire detection and alarm systems — Part 14: Design, installation, commissioning and service of fire detection and fire alarm systems in and around buildings |
| SAE AIR 6211 : 2017 | ICE PENETRATION TEST METHOD FOR RUNWAYS AND TAXIWAYS DEICING/ANTI-ICING CHEMICALS |
| ISO/IEC 14598-4:1999 | Software engineering Product evaluation Part 4: Process for acquirers |
| ISO 50004:2014 | Energy management systems Guidance for the implementation, maintenance and improvement of an energy management system |
| I.S. EN 14229:2010 | STRUCTURAL TIMBER - WOOD POLES FOR OVERHEAD LINES |
| DIN EN ISO 9004:2009-12 | MANAGING FOR THE SUSTAINED SUCCESS OF AN ORGANIZATION - A QUALITY MANAGEMENT APPROACH |
| PREN 9104-001 : 200P1 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 001: REQUIREMENTS FOR AVIATION, SPACE AND DEFENCE QUALITY MANAGEMENT SYSTEM CERTIFICATION PROGRAMS |
| PREN 10025-1 : DRAFT 2011 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| CEI UNI ISO/IEC 12207 : 2013 | SYSTEMS AND SOFTWARE ENGINEERING - SOFTWARE LIFE CYCLE PROCESSES |
| PREN 13602 : DRAFT 2011 | COPPER AND COPPER ALLOYS - DRAWN, ROUND COPPER WIRE FOR THE MANUFACTURE OF ELECTRICAL CONDUCTORS |
| PREN 12764 : DRAFT 2014 | SANITARY APPLIANCES - SPECIFICATION FOR WHIRLPOOL BATHS |
| ASTM F 1718 : 2001 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
| CEN/TR 15367-3:2009 | Petroleum products - Guide for good housekeeping - Part 3: Prevention of cross contamination |
| I.S. EN 60076-1:2011 | POWER TRANSFORMERS - PART 1: GENERAL (IEC 60076-1:2011) |
| PREN 13964 : DRAFT 2013 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| SAE AS 7114 : 2008 | NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR NONDESTRUCTIVE TESTING |
| BS ISO 55002:2014 | Asset management. Management systems. Guidelines for the application of ISO 55001 |
| PREN 9000-2 : 200P2 | AEROSPACE SERIES - AEROSPACE INDUSTRY QUALITY SYSTEM - PART 2: REQUIREMENTS APPLICABLE TO MAINTENANCE ORGANIZATIONS |
| PREN 54-3 : DRAFT 2009 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS |
| IECQ 03-2:2013 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PROCEDURE - PART 2: IECQ APPROVED PROCESS SCHEME |
| PREN 4700-007 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| UNI CEN/TR 14383-2 : 2010 | PREVENTION OF CRIME - URBAN PLANNING AND BUILDING DESIGN - PART 2: URBAN PLANNING |
| CEI EN 62309 : 2005 | DEPENDABILITY OF PRODUCTS CONTAINING REUSED PARTS - REQUIREMENTS FOR FUNCTIONALITY AND TESTS |
| CEI EN 61869-1 : 2010 | INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS |
| ISO 7240-19:2007 | Fire detection and alarm systems — Part 19: Design, installation, commissioning and service of sound systems for emergency purposes |
| PREN 4700-001 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| BS EN ISO 11607-1 : 2009 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
| CSA ISO 9000-3 : 1998 | QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - GUIDELINES FOR THE APPLICATION OF ISO 9001:1994 TO THE DEVELOPMENT, SUPPLY, INSTALLATION AND MAINTENANCE OF COMPUTER SOFTWARE |
| PREN 4115 : 200P2 | AEROSPACE SERIES - CUSHION, RUBBER FOR CLAMPS - DIMENSIONS, MASSES |
| SAE AS 9003 : 2012 | INSPECTION AND TEST QUALITY SYSTEMS, REQUIREMENTS FOR AVIATION, SPACE, AND DEFENSE ORGANIZATIONS |
| CEN/TS 15511:2008 | Postal services - Quality of service - Information available on postal services |
| I.S. EN ISO 12679:2015 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011) |
| BS ISO/IEC/IEEE 15289:2011 | Systems and software engineering. Content of life-cycle information products (documentation) |
| BS EN 1279-6:2002 | Glass in building. Insulating glass units Factory production control and periodic tests |
| UNI CEI ISO/IEC TS 17022 : 2013 | CONFORMITY ASSESSMENT - REQUIREMENTS AND RECOMMENDATIONS FOR CONTENT OF A THIRD-PARTY AUDIT REPORT ON MANAGEMENT SYSTEMS |
| PREN 12591 : DRAFT 2016 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
| BS EN ISO 11135:2014 | Sterilization of health-care products. Ethylene oxide. Requirements for the development, validation and routine control of a sterilization process for medical devices |
| ISO/TS 10004:2010 | Quality management Customer satisfaction Guidelines for monitoring and measuring |
| KTA 3205.2 : 2015 COR 2016 | COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 2: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR PRESSURE AND ACTIVITY-RETAINING COMPONENTS IN SYSTEMS OUTSIDE THE PRIMARY CIRCUIT |
| I.S. EN 61325:1997 | INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| BS EN ISO 16228:2018 | Fasteners. Types of inspection documents |
| NF ISO 20683-1 : 2005 | AIRCRAFT GROUND EQUIPMENT - DESIGN, TEST AND MAINTENANCE FOR TOWBARLESS TOWING VEHICLES (TLTV) INTERFACED WITH NOSE-LANDING GEAR - PART 1: MAIN-LINE AIRCRAFT |
| ANSI Z359.7 : 2011 | QUALIFICATION AND VERIFICATION TESTING OF FALL PROTECTION PRODUCTS |
| AAMI ISO 11137-1 : 2006 : R2010 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| UNI EN 16590-3 : 2014 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 3: SERIES DEVELOPMENT, HARDWARE AND SOFTWARE |
| I.S. EN 62703:2013 | EXPRESSION OF PERFORMANCE OF FLUOROMETRIC OXYGEN ANALYZERS IN LIQUID MEDIA (IEC 62703:2013 (EQV)) |
| I.S. EN 61131-6:2012 | PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY (IEC 61131-6:2012 (EQV)) |
| I.S. EN 14695:2010 | FLEXIBLE SHEETS FOR WATERPROOFING - REINFORCED BITUMEN SHEETS FOR WATERPROOFING OF CONCRETE BRIDGE DECKS AND OTHER TRAFFICKED AREAS OF CONCRETE - DEFINITIONS AND CHARACTERISTICS |
| I.S. EN 4691-1:2017 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION |
| I.S. ISO 45001:2018 | OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| UNE 179002:2018 | Health services. Quality management system for health care transport organization. |
| I.S. ISO 10019:2005 | GUIDELINES FOR THE SELECTION OF QUALITY MANAGEMENT SYSTEM CONSULTANTS AND USE OF THEIR SERVICES |
| I.S. EN 61189-5-3:2015 | TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-3: GENERAL TEST METHODS FOR MATERIALS AND ASSEMBLIES - SOLDERING PASTE FOR PRINTED BOARD ASSEMBLIES |
| IEEE/ISO/IEC 15288-2015 | ISO/IEC/IEEE International Standard - Systems and software engineering -- System life cycle processes |
| I.S. EN 4133:2009 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| S.R. CEN/TS 1555-7:2013 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| UNI CEI EN ISO/IEC 17020 : 2012 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR THE OPERATION OF VARIOUS TYPES OF BODIES PERFORMING INSPECTION |
| I.S. EN ISO 9004:2009 | QUALITY MANAGEMENT - QUALITY OF AN ORGANIZATION - GUIDANCE TO ACHIEVE SUSTAINED SUCCESS (ISO 9004:2018) |
| UNI EN 16590-1 : 2014 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN AND DEVELOPMENT |
| I.S. EN 15348:2014 | PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(ETHYLENE TEREPHTHALATE) (PET) RECYCLATES |
| S.R. ISO TR 22869:2006 | MEDICAL LABORATORIES - GUIDANCE ON LABORATORY IMPLEMENTATION OF ISO 15189: 2003 |
| PREN 448 : DRAFT 2018 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| UNI EN ISO 3183 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| I.S. EN 16153:2013 | LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| ISO/TR 15497:2000 | Road vehicles Development guidelines for vehicle based software |
| S.R. CEN/CLC/ISO/IEC/TS 17021-3:2016 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEMS (ISO/IEC/TS 17021-3:2013) |
| IEEE 1074-2006 | IEEE Standard for Developing a Software Project Life Cycle Process |
| ISO/TS 20460:2015 | Paper and board — Automated on-line testing — Metrological comparability between standardized measurements and output of on-line gauges |
| I.S. EN 124-3:2015 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 3: GULLY TOPS AND MANHOLE TOPS MADE OF STEEL OR ALUMINIUM ALLOYS |
| ISO 9004:2018 | Quality management — Quality of an organization — Guidance to achieve sustained success |
| I.S. EN 3043:2008 | AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING STEEL FE-PA92HT (A286) - CLASSIFICATION: 900 MPA/650 DEGREES C, MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
| I.S. EN 61192-5:2007 | WORKMANSHIP REQUIREMENTS FOR SOLDERED ELECTRONIC ASSEMBLIES - PART 5: REWORK, MODIFICATION AND REPAIR OF SOLDERED ELECTRONIC ASSEMBLIES |
| IEEE 2030.2-2015 | IEEE Guide for the Interoperability of Energy Storage Systems Integrated with the Electric Power Infrastructure |
| S.R. CEN TR 16017:2010 | GUIDE TO THE USE OF EN 598 |
| 18/30368651 DC : 0 | BS EN 448 - DISTRICT HEATING PIPES - BONDED SINGLE PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FACTORY MADE FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND A CASING OF POLYETHYLENE |
| UNE-EN 12899-3:2010 | Fixed, vertical road traffic signs - Part 3: Delineator posts and retroreflectors |
| DIN EN 13369:2013-08 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| I.S. EN 14534:2016 | POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF THE TRANSI TIME OF END-TO-END SERVICES FOR BULK MAIL |
| ISO 15835-1:2009 | Steels for the reinforcement of concrete Reinforcement couplers for mechanical splices of bars Part 1: Requirements |
| I.S. EN 12566-6:2016 | SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 6: PREFABRICATED TREATMENT UNITS FOR SEPTIC TANK EFFLUENT |
| I.S. EN 61557-15:2014 | ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 15: FUNCTIONAL SAFETY REQUIREMENTS FOR INSULATION MONITORING DEVICES IN IT SYSTEMS AND EQUIPMENT FOR INSULATION FAULT LOCATION IN IT SYSTEMS |
| I.S. EN 15234-1:2011 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 1: GENERAL REQUIREMENTS |
| I.S. ENV 13481-6:2002 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 6: SPECIAL FASTENING SYSTEMS FOR ATTENUATION OF VIBRATION |
| I.S. EN 15283-2:2008 | GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS |
| ISO 10425:2003 | Steel wire ropes for the petroleum and natural gas industries — Minimum requirements and terms of acceptance |
| 16/30258515 DC : 0 | BS EN 13674-4 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| EN IEC 62443-4-1:2018 | Security for industrial automation and control systems - Part 4-1: Secure product development lifecycle requirements |
| I.S. EN 13369:2018 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| I.S. EN 15221-3:2011 | FACILITY MANAGEMENT - PART 3: GUIDANCE ON QUALITY IN FACILITY MANAGEMENT |
| AAMI QSR : 1996 | QUALITY SYSTEM REGULATION (21 CFR PARTS 808, 812 AND 820) - OCTOBER 1996 |
| DIN EN 54-5:2001-03 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 5: HEAT DETECTORS - POINT HEAT DETECTORS |
| CEI EN 61207-6 : 2016 | EXPRESSION OF PERFORMANCE OF GAS ANALYZERS - PART 6: PHOTOMETRIC ANALYZERS |
| BS EN 1279-5 : 2005 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY |
| S.R. ISO/TS 9002:2016 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR THE APPLICATION OF ISO 9001:2015 |
| 16/30258490 DC : 0 | BS EN 14587-1 - RAILWAY APPLICATIONS - INFRASTRUCTURE - FLASH BUTT WELDING OF RAILS - PART 1: NEW R220, R260, R260MN, R320CR, R350HT, R370LHT AND R400HT GRADE RAILS IN A FIXED PLANT |
| ISO 37001:2016 | Anti-bribery management systems — Requirements with guidance for use |
| PREN 1559-1 : DRAFT 2009 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| S.R. CEN/TR 16949:2016 | ROAD RESTRAINT SYSTEM - PEDESTRIAN RESTRAINT SYSTEM - PEDESTRIAN PARAPETS |
| ISO 30003:2009 | Ships and marine technology — Ship recycling management systems — Requirements for bodies providing audit and certification of ship recycling management |
| I.S. EN 15213-4:2013 | INTELLIGENT TRANSPORT SYSTEMS - AFTER-THEFT SYSTEMS FOR THE RECOVERY OF STOLEN VEHICLES - PART 4: INTERFACE AND SYSTEM REQUIREMENTS IN TERMS OF LONG RANGE COMMUNICATION SYSTEM |
| ISO/TS 22391-7:2011 | Plastics piping systems for hot and cold water installations Polyethylene of raised temperature resistance (PE-RT) Part 7: Guidance for the assessment of conformity |
| S.R. CEN/TS 16850:2015 | SOCIETAL AND CITIZEN SECURITY - GUIDANCE FOR MANAGING SECURITY IN HEALTHCARE FACILITIES |
| UNE-EN 15234-1:2011 | Solid biofuels - Fuel quality assurance - Part 1: General requirements |
| I.S. EN 16475-7:2016 | CHIMNEYS - ACCESSORIES - PART 7: RAIN CAPS - REQUIREMENTS AND TEST METHODS |
| I.S. EN CWA 14172-5:2004 | EESSI CONFORMITY ASSESSMENT GUIDANCE - PART 5: SECURE SIGNATURE CREATION DEVICES |
| S.R. CLC/TS 50502:2008 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS |
| I.S. EN 100114-1:1997 | RULE OF PROCEDURE - QUALITY ASSESSMENT PROCEDURES - PART 1: CECC REQUIREMENTS FOR THE APPROVAL OF AN ORGANIZATION |
| PREN 13771-2 : DRAFT 2016 | COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 2: CONDENSING UNITS |
| ISO 11134:1994 | Sterilization of health care products — Requirements for validation and routine control — Industrial moist heat sterilization |
| I.S. EN 10343:2009 | STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS |
| ISO 10008:2013 | Quality management — Customer satisfaction — Guidelines for business-to-consumer electronic commerce transactions |
| S.R. CWA 16030:2009 | CODE OF PRACTICE FOR IMPLEMENTING QUALITY IN MOBILITY MANAGEMENT IN SMALL AND MEDIUM SIZED CITIES |
| ISO/IEC/IEEE 29119-2:2013 | Software and systems engineering — Software testing — Part 2: Test processes |
| UTEC 96 004 : 2008 | AUDIT FOR OBSOLESCENCE MANAGEMENT |
| I.S. EN 61189-5-2:2015 | TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-2: GENERAL TEST METHODS FOR MATERIALS AND ASSEMBLIES - SOLDERING FLUX FOR PRINTED BOARD ASSEMBLIES |
| S.R. CEN TR 15353:2007 | PLASTICS - RECYCLED PLASTICS - GUIDELINES FOR THE DEVELOPMENT OF STANDARDS FOR RECYCLED PLASTICS |
| BS EN 62304 : 2006 | MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE-CYCLE PROCESSES |
| I.S. EN 15228:2009 | STRUCTURAL TIMBER - STRUCTURAL TIMBER PRESERVATIVE TREATED AGAINST BIOLOGICAL ATTACK |
| ISO 3999:2004 | Radiation protection — Apparatus for industrial gamma radiography — Specifications for performance, design and tests |
| S.R. CEN/TS 1451-2:2012 | PLASTIC PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| I.S. EN 54-27:2015 | FIRE DETECTION AND FIRE ALARMS SYSTEMS - PART 27: DUCT SMOKE DETECTORS |
| I.S. EN 4075:2008 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 490 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| UNI ISO 10004 : 2013 | QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR MONITORING AND MEASURING |
| BS EN ISO 11133 : 2014 | MICROBIOLOGY OF FOOD, ANIMAL FEED AND WATER - PREPARATION, PRODUCTION, STORAGE AND PERFORMANCE TESTING OF CULTURE MEDIA |
| DIN EN 15102:2016-02 (Draft) | DECORATIVE WALL COVERINGS - ROLL AND PANEL FORM |
| NF EN 9137 : 2012 | QUALITY MANAGEMENT SYSTEMS - GUIDANCE FOR THE APPLICATION OF AQAP 2110 WITHIN AN EN 9100 QUALITY MANAGEMENT SYSTEM |
| I.S. EN ISO 3452-6:2008 | NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 6: PENETRANT TESTING AT TEMPERATURES LOWER THAN 10 DEGREES C |
| ISO 2020-2:1997 | Aerospace — Preformed flexible steel wire rope for aircraft controls — Part 2: Technical specification |
| S.R. CWA 16393:2012 | LABORATORY BIORISK MANAGEMENT - GUIDELINES FOR THE IMPLEMENTATION OF CWA 15793:2008 |
| I.S. EN 4710-01:2015 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 01: TECHNICAL SPECIFICATION |
| I.S. EN 61811-1:2015 | ELECTROMECHANICAL TELECOM ELEMENTARY RELAYS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION AND BLANK DETAIL SPECIFICATION |
| I.S. EN 14587-3:2012 | RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 3: WELDING IN ASSOCIATION WITH CROSSING CONSTRUCTION |
| S.R. CEN/TS 1401-2:2012 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY |
| ISO 8336:2017 | Fibre-cement flat sheets — Product specification and test methods |
| DIN EN ISO 50001:2011-12 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE (ISO 50001:2011) |
| I.S. EN ISO 16961:2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF STEEL STORAGE TANKS (ISO 16961:2015) |
| DD ISO/PAS 28003:2006 | Security management systems for the supply chain. Requirements for bodies providing audit and certification of supply chain security management systems |
| ISO/TR 30406:2017 | Human resource management Sustainable employability management for organizations |
| ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| UNE-EN 13815:2012 | Fibrous gypsum plaster casts - Definitions, requirements and test methods |
| ISO/TS 22559-4:2011 | Safety requirements for lifts (elevators) — Part 4: Global conformity assessment procedures (GCAP) — Certification and accreditation requirements |
| BS EN 12566-7:2013 | Small wastewater treatment systems for up to 50 PT Prefabricated tertiary treatment units |
| ISO/TS 17582:2014 | Quality management systems Particular requirements for the application of ISO 9001:2008 for electoral organizations at all levels of government |
| DIN EN 54-24:2008-06 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: COMPONENTS OF VOICE ALARM SYSTEMS - LOUDSPEAKERS |
| DIN EN 1457-1:2016-10 (Draft) | Chimney - Clay/ceramic flue liners - Part 1: Flue liners operating under dry conditions - Requirements and test methods; German and English version prEN 1457-1:2016 |
| NSF 140 : 2015 | SUSTAINABILITY ASSESSMENT FOR CARPET |
| ISO 28594:2017 | Combined accept-zero sampling systems and process control procedures for product acceptance |
| ISO 13448-1:2005 | Acceptance sampling procedures based on the allocation of priorities principle (APP) Part 1: Guidelines for the APP approach |
| ISO 20683-1:2016 | Aircraft ground equipment Nose gear towbarless towing vehicle (TLTV) Design, testing and maintenance requirements Part 1: Main line aircraft |
| BS EN ISO 50001:2011 | Energy management systems. Requirements with guidance for use |
| ISO 50007:2017 | Energy services Guidelines for the assessment and improvement of the energy service to users |
| PD CEN/TS 1329-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
| UNE-EN 60079-19:2011 | Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation |
| DD CEN ISO/TS 15876-7:2003 | Plastics piping systems for hot and cold water installations. Polybutylene (PB) Guidance for the assessment of conformity |
| I.S. EN 13924-1:2015 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS |
| ISO 30301:2011 | Information and documentation Management systems for records Requirements |
| ISO 25119-4:2010 | Tractors and machinery for agriculture and forestry Safety-related parts of control systems Part 4: Production, operation, modification and supporting processes |
| S.R. CEN ISO TS 29001:2011 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SECTOR-SPECIFIC QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR PRODUCT AND SERVICE SUPPLY ORGANIZATIONS |
| ISO/PAS 28002:2010 | Security management systems for the supply chain - Development of resilience in the supply chain - Requirements with guidance for use |
| XP ISO/TS 9002 : 2017 XP | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR THE APPLICATION OF ISO 9001:2015 |
| ASTM E 2066 : 2000 : R2007 | Standard Guide for Validation of Laboratory Information Management Systems (Withdrawn 2015) |
| ISO 8539:2009 | Forged steel lifting components for use with Grade 8 chain |
| UNE-EN ISO 19011:2012 | Guidelines for auditing management systems (ISO 19011:2011) |
| ISO 18400-106:2017 | Soil quality — Sampling — Part 106: Quality control and quality assurance |
| ISO 21927-7:2017 | Smoke and heat control systems — Part 7: Smoke ducts sections |
| CSA ISO 9004-3 : 1994 | QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS - PART 3: GUIDELINES FOR PROCESSED MATERIALS |
| I.S. EN 4129:2009 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| DIN EN 15331:2011-11 | Criteria for design, management and control of maintenance services for buildings |
| 17/30356149 DC : 0 | BS EN 508-2 - ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM |
| I.S. EN 13476-2:2007 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY (VINYLCHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INTERNAL AND EXTERNAL SURFACE AND THE SYSTEM, TYPE A |
| 14/30297465 DC : 0 | BS EN 15014 - PLASTICS PIPING SYSTEMS - BURIED AND ABOVE GROUND PIPING COMPONENTS FOR WATER UNDER PRESSURE - REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR PIPES AND FITTINGS |
| 16/30258472 DC : 0 | BS EN 14811 - RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
| GOST R ISO/IEC 15423 : 2005 | AUTOMATIC IDENTIFICATION - BAR CODING - GENERAL REQUIREMENTS FOR BAR CODE SCANNER AND DECODER PERFORMANCE TESTING |
| EN ISO 15175:2011 | Soil quality - Characterization of soil related to groundwater protection (ISO 15175:2004) |
| UNI EN ISO 11607-2 : 2014 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES |
| NF EN 3043 : 2009 | AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING STEEL FE-PA92HT (A286) - CLASSIFICATION: 900 MPA/650 DEGREES C, MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
| 17/30353403 DC : 0 | BS EN 17097 - GEOSYNTHETICS - CHARACTERISTICS REQUIRED FOR USE IN SURFACE EROSION CONTROL ON SLOPES AND BANKS |
| CSA NGV 6.1 : 2016 | COMPRESSED NATURAL GAS (CNG) FUEL STORAGE AND DELIVERY SYSTEMS FOR ROAD VEHICLES |
| ISO/PAS 12835:2013 | Qualification of casing connections for thermal wells |
| GEIA STD 0002-1 : 2005 | AEROSPACE QUALIFIED ELECTRONIC COMPONENT (AQEC) REQUIREMENTS, VOLUME 1 - INTEGRATED CIRCUITS AND SEMICONDUCTORS |
| I.S. EN 9104-001:2013 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 001: REQUIREMENTS FOR AVIATION, SPACE, AND DEFENCE QUALITY MANAGEMENT SYSTEM CERTIFICATION PROGRAMS |
| 17/30360664 DC : 0 | BS EN 507 - ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED PRODUCTS OF ALUMINIUM SHEET |
| I.S. EN 50581:2012 | TECHNICAL DOCUMENTATION FOR THE ASSESSMENT OF ELECTRICAL AND ELECTRONIC PRODUCTS WITH RESPECT TO THE RESTRICTION OF HAZARDOUS SUBSTANCES |
| UNI EN 9104-001 : 2013 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 001: REQUIREMENTS FOR AVIATION, SPACE, AND DEFENCE QUALITY MANAGEMENT SYSTEM CERTIFICATION PROGRAMS |
| UNI ISO 26000 : 2010 | GUIDANCE ON SOCIAL RESPONSIBILITY |
| CSA ISO/IEC TS 24748-1 : 2018 | SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE MANAGEMENT - PART 1: GUIDELINES FOR LIFE CYCLE MANAGEMENT |
| CAN/CSA-ISO/IEC 27006:16 | Information technology - Security techniques - Requirements for bodies providing audit and certification of information security management systems (Adopted ISO/IEC 27006:2015, third edition, 2015-10-01) |
| UNI CEI EN ISO/IEC 80079-34 : 2012 | EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE |
| 17/30353879 DC : 0 | BS EN 17104 - THERMOPLASTICS RIGID PROTECTIVE WALLCOVERING PANELS FOR INTERNAL USE IN BUILDINGS - PERFORMANCE CHARACTERISTICS |
| NF EN 4129 : 2009 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| 17/30359850 DC : 0 | BS EN 14178-2 - GLASS IN BUILDING - BASIC ALKALINE EARTH SILICATE GLASS PRODUCTS - PART 2: PRODUCT STANDARD |
| UNE-EN 12845:2016 | Fixed firefighting systems - Automatic sprinkler systems - Design, installation and maintenance |
| 17/30360284 DC : 0 | BS EN 14695 - FLEXIBLE SHEETS FOR WATERPROOFING - REINFORCED BITUMEN SHEETS FOR WATERPROOFING OF CONCRETE BRIDGE DECKS AND OTHER TRAFFICKED AREAS OF CONCRETE - DEFINITIONS AND CHARACTERISTICS |
| BS EN 14428 : 2015 | SHOWER ENCLOSURES - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| EN 13407:2015 | Wall-hung urinals - Functional requirements and test methods |
| ENV 50231 : 1997 | AVIATION GROUND LIGHTING ELECTRICAL INSTALLATION - CONSTANT CURRENT REGULATOR: EQUIPMENT SPECIFICATIONS AND TESTS |
| FD Z67 100-2 : 95 FD | INFORMATION TECHNOLOGY - DOCUMENTATION OF SOFTWARE SYSTEMS - PART 2: MANAGEMENT OF DOCUMENTATION FOR QUALITY ASSURANCE ISSUES |
| UNI EN 10088-4 : 2009 | STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| UNI CEN/TS 1401-2 : 2012 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGRONUD DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY |
| EN 13476-2:2018 | Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A |
| DEFSTAN 66-6/4(1993) : 1993 | OHMMETER, SAFETY, MULTI-RANGE, BATTERY POWERED SET |
| 17/30362692 DC : 0 | BS EN 598 - COATED AND LINED DUCTILE IRON PIPES, FITTINGS AND THEIR JOINTS FOR SEWERAGE AND DRAINAGE APPLICATIONS - PRODUCTS CHARACTERISTICS AND TEST AND ASSESSMENT METHODS |
| ISO/IEC TS 33052:2016 | Information technology — Process reference model (PRM) for information security management |
| 16/30339223 DC : 0 | BS EN 17002 - THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - THERMAL SPRAY PROCEDURE SPECIFICATION |
| ABS 0251 : 2016 | CYBERSECURITY IMPLEMENTATION FOR THE MARINE AND OFFSHORE INDUSTRIES - CYBERSAFETY[TM] VOLUME 2 |
| ASTM F 2066 : 2018 : REDLINE | Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150) |
| ASTM F 2070 : 2000 | Standard Specification for Transducers, Pressure and Differential, Pressure, Electrical and Fiber-Optic |
| UNE-EN 15322:2014 | Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders |
| BIS IS 13774 : 2014 | LIVE WORKING - GLOVES OF INSULATING MATERIAL |
| ASTM F 1350 : 2015 : REDLINE | Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673) |
| ASTM F 3184 : 2016 | Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion |
| ASTM F 67 : 2013 | Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700) |
| CEN/TR 15545:2006 | Guide to the use of EN 545 |
| NFPA 1981 : 2013 | OPEN-CIRCUIT SELF-CONTAINED BREATHING APPARATUS (SCBA) FOR EMERGENCY SERVICES |
| NF EN 61400-3 : 2009 | WIND TURBINES - PART 3: DESIGN REQUIREMENTS FOR OFFSHORE WIND TURBINES |
| CSA CEI/IEC 1258 : 1998 | GUIDELINES FOR THE DEVELOPMENT AND USE OF MEDICAL ELECTRICAL EQUIPMENT EDUCATIONAL MATERIALS |
| CSA ISO 11140-1 : 2016 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
| UNI EN 9137 : 2012 | QUALITY MANAGEMENT SYSTEMS - GUIDANCE FOR THE APPLICATION OF AQAP 2110 WITHIN AN EN 9100 QUALITY MANAGEMENT SYSTEM |
| UNE-EN 9137:2012 | Quality management systems - Guidance for the Application of AQAP 2110 within an EN 9100 Quality Management System |
| UNE-ISO 22006:2013 | Quality management systems -- Guidelines for the application of ISO 9001:2008 to crop production. |
| UNE-EN 1400:2013 | Child use and care articles - Soothers for babies and young children - Safety requirements and test methods |
| EN 16954:2018 | Agglomerated stone - Slabs and cut-to-size products for flooring and stairs (internal and external) |
| ASTM E 1976 : 2011 : REDLINE | SPECIFICATION FOR SHELTER, TACTICAL, NONEXPANDABLE |
| ASTM F 67 : 2013 : R2017 | Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700) |
| NORSOK M 630 : REV 6 | MATERIAL DATA SHEETS AND ELEMENT DATA SHEETS FOR PIPING |
| ISO 10276:2010 | Nuclear energy Fuel technology Trunnions for packages used to transport radioactive material |
| DIN EN 54-25:2015-10 (Draft) | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS |
| I.S. EN 61400-3:2009 | WIND TURBINES - PART 3: DESIGN REQUIREMENTS FOR OFFSHORE WIND TURBINES |
| ISO 22241-3:2017 | Diesel engines — NOx reduction agent AUS 32 — Part 3: Handling, transportation, and storage |
| BS EN 61207-3:2002 | Expression of performance of gas analyzers Paramagnetic oxygen analyzers |
| BS EN ISO 15175:2011 | Soil quality. Characterization of soil related to groundwater protection |
| ISO/IEC 17011:2017 | Conformity assessment — Requirements for accreditation bodies accrediting conformity assessment bodies |
| IEC TS 62668-1:2016 | Process management for avionics - Counterfeit prevention - Part 1: Avoiding the use of counterfeit, fraudulent and recycled electronic components |
| NF EN ISO 15175 : 2011 | SOIL QUALITY - CHARACTERIZATION OF SOIL RELATED TO GROUNDWATER PROTECTION |
| BS EN 14423:2013+A2:2019 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| I.S. EN 16114:2011 | MANAGEMENT CONSULTANCY SERVICES |
| I.S. EN 15964:2011 | BREATH ALCOHOL TEST DEVICES OTHER THAN SINGLE USE DEVICES - REQUIREMENTS AND TEST METHODS |
| ISO 24521:2016 | Activities relating to drinking water and wastewater services — Guidelines for the management of basic on-site domestic wastewater services |
| ISO/IEC 27006:2015 | Information technology — Security techniques — Requirements for bodies providing audit and certification of information security management systems |
| ISO 8724:2009 | Cork decorative panels Specification |
| I.S. EN 61207-6:2015 | EXPRESSION OF PERFORMANCE OF GAS ANALYZERS - PART 6: PHOTOMETRIC ANALYZERS |
| ISO 17894:2005 | Ships and marine technology — Computer applications — General principles for the development and use of programmable electronic systems in marine applications |
| PREN 17002 : DRAFT 2016 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - THERMAL SPRAY PROCEDURE SPECIFICATION |
| PREN 488 : DRAFT 2018 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - STEEL VALVE ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| EN 15655:2009 | Ductile iron pipes, fittings and accessories - Internal polyurethane lining for pipes and fittings - Requirements and test methods |
| EN ISO 19258:2011 | Soil quality - Guidance on the determination of background values (ISO 19258:2005) |
| ISO/IEC TR 15504-6:2008 | Information technology Process assessment Part 6: An exemplar system life cycle process assessment model |
| BS EN 448:2015 | District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| ASTM F 3318 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam |
| SAE J 2911 : 2017 | PROCEDURE FOR CERTIFICATION THAT REQUIREMENTS FOR MOBILE AIR CONDITIONING SYSTEM COMPONENTS, SERVICE EQUIPMENT, AND SERVICE TECHNICIAN TRAINING MEET SAE J STANDARDS |
| ASTM F 620 : 2011 | Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition |
| BS EN 9110:2015 | Quality Management Systems. Requirements for Aviation Maintenance Organizations |
| I.S. EN ISO/IEC 19796-1:2009 | INFORMATION TECHNOLOGY - LEARNING, EDUCATION AND TRAINING - QUALITY MANAGEMENT, ASSURANCE AND METRICS - PART 1: GENERAL APPROACH |
| I.S. EN 13422:2004 | VERTICAL ROAD SIGNS - PORTABLE DEFORMABLE WARNING DEVICES AND DELINEATORS - PORTABLE ROAD TRAFFIC SIGNS - CONES AND CYLINDERS |
| ISO 22965-2:2007 | Concrete — Part 2: Specification of constituent materials, production of concrete and compliance of concrete |
| I.S. EN 62326-1:2002 | PRINTED BOARDS - GENERIC SPECIFICATION |
| ISO 7240-3:2010 | Fire detection and alarm systems Part 3: Audible alarm devices |
| EN ISO 9004:2018 | Quality management - Quality of an organization - Guidance to achieve sustained success (ISO 9004:2018) |
| API 17H : 2013 | REMOTELY OPERATED TOOLS AND INTERFACES ON SUBSEA PRODUCTION SYSTEMS |
| ASTM F 1537 : 2011 : REDLINE | Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539) |
| ISO/PAS 28001:2006 | Security management systems for the supply chain Best practices for implementing supply chain security Assessments and plans |
| IWA 2:2007 | Quality management systems Guidelines for the application of ISO 9001:2000 in education |
| I.S. EN ISO 9000-1:1994 | QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - PART 1: GUIDELINES FOR SELECTION AND USE |
| ASTM F 621 : 2012 | Standard Specification for Stainless Steel Forgings for Surgical Implants |
| ISO/TS 13131:2014 | Health informatics Telehealth services Quality planning guidelines |
| ISO 14186:2013 | Air cargo — Fire containment covers — Design, performance and testing requirements |
| ISO/IEC 16350:2015 | Information technology Systems and software engineering Application management |
| I.S. EN 61400-22:2011 | WIND TURBINES - PART 22: CONFORMITY TESTING AND CERTIFICATION |
| ASHRAE 90.4 : 2016 | ENERGY STANDARD FOR DATA CENTERS |
| ISO 11135:2014 | Sterilization of health-care products — Ethylene oxide — Requirements for the development, validation and routine control of a sterilization process for medical devices |
| I.S. EN 61496-1:2013 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS |
| IEC 61869-1:2007 | Instrument transformers - Part 1: General requirements |
| I.S. EN 15827:2011 | RAILWAY APPLICATIONS - REQUIREMENTS FOR BOGIES AND RUNNING GEARS |
| IEC WT 01:2001 | IEC System for Conformity Testing and Certification of Wind Turbines - Rules and procedures |
| I.S. EN 10253-3:2008 | BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS |
| I.S. CEN TS 15331:2006 | CRITERIA FOR DESIGN, MANAGEMENT AND CONTROL OF MAINTENANCE SERVICES FOR BUILDINGS |
| I.S. EN 14535-2:2011 | RAILWAY APPLICATIONS - BRAKE DISCS FOR RAILWAY ROLLING STOCK - PART 2: BRAKE DISCS MOUNTED ONTO THE WHEEL, DIMENSIONS AND QUALITY REQUIREMENTS |
| I.S. CWA 14172-4:2004 | EESSI CONFORMITY ASSESSMENT GUIDANCE - PART 4: SIGNATURE CREATION APPLICATIONS AND GENERAL GUIDELINES FOR ELECTRONIC SIGNATURE VERIFICATION |
| I.S. EN 62366:2009 | MEDICAL DEVICES - APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
| ISO/TS 22003:2013 | Food safety management systems Requirements for bodies providing audit and certification of food safety management systems |
| I.S. EN 15824:2017 | SPECIFICATIONS FOR EXTERNAL RENDERS AND INTERNAL PLASTERS BASED ON ORGANIC BINDERS |
| S.R. CEN ISO TS 15877-7:2009 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| I.S. EN 15650:2010 | VENTILATION FOR BUILDINGS - FIRE DAMPERS |
| I.S. EN 14587-2:2009 | RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 2: NEW R220, R260, R260MN AND R350HT GRADE RAILS BY MOBILE WELDING MACHINES AT SITES OTHER THAN A FIXED PLANT |
| ISO/IEC 24700:2005 | Quality and performance of office equipment that contains reused components |
| S.R. CEN TS 14816:2008 | FIXED FIREFIGHTING SYSTEMS - WATER SPRAY SYSTEMS - DESIGN, INSTALLATION AND MAINTENANCE |
| I.S. EN ISO/IEC 17021:2011 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS |
| I.S. EN 61190-1-1:2002 | ATTACHMENT MATERIALS FOR ELECTRONIC ASSEMBLY - PART 1-1: REQUIREMENTS FOR SOLDERING FLUXES FOR HIGH-QUALITY INTERCONNECTIONS IN ELECTRONICS ASSEMBLY |
| I.S. EN 60896-22:2004 | STATIONARY LEAD-ACID BATTERIES - PART 22: VALVE REGULATED TYPES - REQUIREMENTS |
| UNE-EN 13310:2016 | Kitchen sinks - Functional requirements and test methods |
| I.S. EN ISO 15378:2017 | PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2015, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP) (ISO 15378:2017) |
| IEC 62304:2006+AMD1:2015 CSV | Medical device software - Software life cycle processes |
| API SPEC Q2 : 2011+ADD 1 : 2016 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR SERVICE SUPPLY ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| IEC 62366:2007+AMD1:2014 CSV | Medical devices - Application of usability engineering to medical devices |
| EN 13230-4:2016 | Railway applications - Track - Concrete sleepers and bearers - Part 4: Prestressed bearers for switches and crossings |
| EN 50128:2011/AC:2014 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SOFTWARE FOR RAILWAY CONTROL AND PROTECTION SYSTEMS |
| I.S. EN 14889-1:2007 | FIBRES FOR CONCRETE - PART 1: STEEL FIBRES - DEFINITIONS, SPECIFICATIONS AND CONFORMITY |
| EN ISO 14006:2011 | Environmental management systems - Guidelines for incorporating ecodesign (ISO 14006:2011) |
| I.S. EN 12897:2016 | WATER SUPPLY - SPECIFICATION FOR INDIRECTLY HEATED UNVENTED (CLOSED) STORAGE WATER HEATERS |
| EN 61191-2:2017 | Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies |
| EN 61207-7:2013/AC:2015 | EXPRESSION OF PERFORMANCE OF GAS ANALYZERS - PART 7: TUNEABLE SEMICONDUCTOR LASER GAS ANALYZERS (IEC 61207-7:2013) |
| DIN EN 1504-8:2016-08 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 8: QUALITY CONTROL AND ASSESSMENT AND VERIFICATION OF THE CONSTANCY OF PERFORMANCE (AVCP) |
| DIN EN ISO 3834-1:2006-03 | Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2005) |
| DIN EN 13674-3:2010-12 | Railway applications - Track - Rail - Part 3: Check rails (includes Amendment A1:2010) |
| DIN EN 13601:2013-09 | Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
| DIN EN ISO 10931:2015-11 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLY(VINYLIDENE FLUORIDE) (PVDF) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 10931:2005 + AMD 1:2015) |
| DIN EN 13658-2:2005-09 | Metal lath and beads - Definitions, requirements and test methods - Part 2: External rendering |
| DIN EN ISO 15883-1:2014-10 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006 + AMD 1:2014) |
| EN ISO 14922-1:1999 | Thermal spraying - Quality requirements of thermally sprayed structures - Part 1: Guidance for selection and use (ISO 14922-1:1999) |
| CEN/TS 45545-1:2009 | Railway applications - Fire protection on railway vehicles - Part 1: General |
| DIN EN 12952-2:2011-10 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
| DIN EN 1401-1:2009-07 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| DIN EN 13658-1:2005-09 | Metal lath and beads - Definitions, requirements and test methods - Part 1: Internal plastering |
| DIN EN 13481-3:2012-11 | Railway applications - Track - Performance requirements for fastening systems - Part 3: Fastening systems for wood sleepers |
| DIN EN ISO 11137-1:2015-11 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11137-1:2006, INCLUDING AMD 1:2013) |
| DIN EN 13707:2013-12 | FLEXIBLE SHEETS FOR WATERPROOFING - REINFORCED BITUMEN SHEETS FOR ROOF WATERPROOFING - DEFINITIONS AND CHARACTERISTICS |
| EN ISO 14922-3:1999 | Thermal spraying - Quality requirements of thermally sprayed structures - Part 3: Standard quality requirements (ISO 14922-3:1999) |
| DIN EN 13224:2012-01 | Precast concrete products - Ribbed floor elements |
| DIN EN 13237:2013-01 | POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| DIN EN 12952-5:2012-01 | Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
| DIN EN ISO 13849-1:2016-06 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| DIN EN ISO 10451:2010-11 | Dentistry - Contents of technical file for dental implant systems (ISO 10451:2010) |
| DIN EN 683-1:2007-03 | Aluminium and aluminium alloys - Finstock - Part 1: Technical conditions for inspection and delivery |
| DIN EN 14399-1:2015-04 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS |
| DIN EN 764-5:2015-03 | PRESSURE EQUIPMENT - PART 5: INSPECTION DOCUMENTATION OF METALLIC MATERIALS AND COMPLIANCE WITH THE MATERIAL SPECIFICATION |
| DIN EN 13260:2011-01 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELSETS - PRODUCT REQUIREMENTS |
| EN ISO 16106:2006 | Packaging - Transport packages for dangerous goods - Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings - Guidelines for the application of ISO 9001 (ISO 16106:2006) |
| DIN EN 13859-2:2014-07 | FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 2: UNDERLAYS FOR WALLS |
| DIN EN 10025-1:2011-04 (Draft) | Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version prEN 10025-1:2011 |
| DIN EN 13877-3:2005-02 | Concrete pavements - Part 3: Specifications for dowels to be used in concrete pavements |
| DIN EN ISO 10380:2013-02 | Pipework - Corrugated metal hoses and hose assemblies (ISO 10380:2012) |
| DIN EN 1254-4:1998-03 | Copper and copper alloy plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends |
| DIN EN 13481-4:2012-11 | Railway applications - Track - Performance requirements for fastening systems - Part 4: Fastening systems for steel sleepers |
| DIN EN 13600:2013-09 | Copper and copper alloys - Seamless copper tubes for electrical purposes; German version EN 13600:2013 |
| DIN EN 179:2008-04 | Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes - Requirements and test methods |
| DIN EN 490:2012-01 | CONCRETE ROOFING TILES AND FITTINGS FOR ROOF COVERING AND WALL CLADDING - PRODUCT SPECIFICATIONS |
| DIN EN 520:2009-12 | Gypsum plasterboards - Definitions, requirements and test methods (includes Amendment A1:2009) |
| DIN EN 14125:2013-09 | THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS |
| DIN EN ISO 11737-2:2010-04 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
| DIN EN 14065:2016-08 | TEXTILES - LAUNDRY PROCESSED TEXTILES - BIOCONTAMINATION CONTROL SYSTEM |
| DIN EN 998-2:2015-11 (Draft) | SPECIFICATION FOR MORTAR FOR MASONRY - PART 2: MASONRY MORTAR |
| BS EN 14188-2:2004 | Joint fillers and sealants Specifications for cold applied sealants |
| BS EN 14212:2012 | Ambient air. Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence |
| BS EN 13481-4:2012 | Railway applications. Track. Performance requirements for fastening systems Fastening systems for steel sleepers |
| BS EN 13981-1:2003 | Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery Extruded products |
| CSA B51 : 2014 | BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE |
| UNE-EN 13964:2016 | Suspended ceilings - Requirements and test methods |
| UNE-EN ISO 11737-2:2010 | Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process (ISO 11737-2:2009) |
| BS EN 14891:2017 | Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives. Requirements, test methods, assessment and verification of constancy of performance, classification and marking |
| UNE-EN 12897:2017 | Water supply - Specification for indirectly heated unvented (closed) storage water heaters |
| BS EN 1422:2014 | Sterilizers for medical purposes. Ethylene oxide sterilizers. Requirements and test methods |
| BS EN 54-4:1998 | Fire detection and fire alarm systems Power supply equipment |
| ISO 17662:2016 | Welding — Calibration, verification and validation of equipment used for welding, including ancillary activities |
| IEC 61850-4:2011 | Communication networks and systems for power utility automation - Part 4: System and project management |
| BS EN 13229 : 2001 | INSET APPLIANCES INCLUDING OPEN FIRES FIRED BY SOLID FUELS - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 11980:2012 | Ophthalmic optics. Contact lenses and contact lens care products. Guidance for clinical investigations |
| BS EN 1168 : 2005 | PRECAST CONCRETE PRODUCTS - HOLLOW CORE SLABS |
| BS EN 12690:1999 | Biotechnology. Performance criteria for shaft seals |
| BS EN 2882:2006 | Aerospace series. Nuts, hexagonal, self-locking, with counterbore and captive washer, in steel, cadmium plated, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature) / 235°C |
| BS EN 12079-1:2006 | Offshore containers and associated lifting sets Offshore containers. Design, manufacture and marking |
| 11/30250206 DC : 0 | BS EN 6140 - AEROSPACE SERIES - PLUG, PROTECTIVE, NON METALLIC FOR FITTING ENDS <= 3000 PSI HYDRAULIC SYSTEMS |
| UNE-EN 459-3:2016 | Building lime - Part 3: Conformity evaluation |
| BS EN ISO 10931 : 2005 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLY(VINYLIDENE FLUORIDE) (PVDF) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM |
| BS EN ISO 9000:2015 | Quality management systems. Fundamentals and vocabulary |
| BS EN 15274:2015 | General purpose adhesives for structural assembly. Requirements and test methods |
| BS EN 15343:2007 | Plastics. Recycled plastics. Plastics recycling traceability and assessment of conformity and recycled content |
| BS EN 13260 : 2009 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELSETS - PRODUCT REQUIREMENTS |
| BS EN 45510-4-2:1999 | Guide for the procurement of power station equipment. Boiler auxiliaries Gas-air, steam-air and gas-gas heaters - Gas-air,steam-air and gas-gas heaters |
| I.S. EN 1401-1:2009 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| BS EN 1916:2002 | Concrete pipes and fittings, unreinforced, steel fibre and reinforced |
| UNE-EN 13160-4:2017 | Leak detection systems - Part 4: Requirements and test/assessment methods for sensor based leak detection systems |
| BS EN 14339:2005 | Underground fire hydrants |
| BS EN ISO 17662:2016 | Welding. Calibration, verification and validation of equipment used for welding, including ancillary activities |
| BS EN ISO 11135-1:2007 | Sterilization of health care products. Ethylene oxide Requirements for development, validation and routine control of a sterilization process for medical devices |
| BS EN ISO 11140-3:2009 | Sterilization of health care products. Chemical indicators Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test |
| ISO 6718:1991 | Bursting discs and bursting disc devices |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| UNE-EN 1330-1:2015 | Non destructive testing - Terminology - Part 1: List of general terms |
| UNE-EN 508-1:2014 | Roofing and cladding products from metal sheet - Specification for self-supporting of steel, aluminium or stainless steel sheet - Part 1: Steel |
| BS EN 15167-2:2006 | Ground granulated blast furnace slag for use in concrete, mortar and grout Conformity evaluation |
| ISO 20252:2012 | Market, opinion and social research Vocabulary and service requirements |
| BS EN 12446:2011 | Chimneys. Components. Concrete outer wall elements |
| BS EN 13224:2011 | Precast concrete products. Ribbed floor elements |
| UNE-EN 12735-1:2016 | Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems |
| BS EN ISO 14922-2:1999 | Thermal spraying. Quality requirements of thermally sprayed structures Comprehensive quality requirements |
| IEC 61207-6:2014 | Expression of performance of gas analyzers - Part 6: Photometric analyzers |
| ISO 3452-6:2008 | Non-destructive testing Penetrant testing Part 6: Penetrant testing at temperatures lower than 10 degrees C |
| BS EN 10223-3:2013 | Steel wire and wire products for fencing and netting Hexagonal steel wire mesh products for civil engineering purposes |
| BS EN 13986 : 2004 | WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| BS EN 12306:1998 | Biotechnology. Guidance for quality control of diagnostic kits used in agriculture, plant and animal pest and disease control and environmental contamination |
| BS EN 13022-2:2014 | Glass in building. Structural sealant glazing Assembly rules |
| ISO 13940:2015 | Health informatics — System of concepts to support continuity of care |
| BS EN 10210-1:2006 | Hot finished structural hollow sections of non-alloy and fine grain steels Technical delivery requirements |
| BS EN 12385-1 : 2002 | STEEL WIRE ROPES - SAFETY - PART 1: GENERAL REQUIREMENTS |
| ISO 15882:2008 | Sterilization of health care products — Chemical indicators — Guidance for selection, use and interpretation of results |
| BS EN 45510-2-9:2008 | Guide for procurement of power station equipment Electrical equipment. Cabling systems |
| BS EN 1463-1:2009 | Road marking materials. Retroreflecting road studs Initial performance requirements |
| BS EN 2337:2006 | Aerospace series. Spherical plain bearings. Technical specification |
| BS ISO 19281:2016 | Air cargo. Fire resistant containers. Design, performance and testing requirements |
| BS EN 12259-1:1999 | Fixed firefighting systems. Components for sprinkler and water spray systems Sprinklers |
| ISO 14161:2009 | Sterilization of health care products Biological indicators Guidance for the selection, use and interpretation of results |
| IEC 61400-22:2010 | Wind turbines - Part 22: Conformity testing and certification |
| BS EN 13771-1:2016 | Compressors and condensing units for refrigeration. Performance testing and test methods Refrigerant compressors |
| BS EN ISO 15493 : 2003 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS), UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) AND CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES (ISO 15493:2003) |
| BS EN 1254-1:1998 | Copper and copper alloys. Plumbing fittings Fittings with ends for capillary soldering or capillary brazing to copper tubes |
| BS EN 13251:2016 | Geotextiles and geotextile-related products. Characteristics required for use in earthworks, foundations and retaining structures |
| BS EN 14604:2005 | Smoke alarm devices |
| BS EN 12322:1999 | In vitro diagnostic medical devices. Culture media for microbiology. Performance criteria for culture media |
| BS EN ISO 11608-1:2015 | Needle-based injection systems for medical use. Requirements and test methods Needle-based injection systems |
| ISO 3452-2:2013 | Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials |
| ISO 14051:2011 | Environmental management — Material flow cost accounting — General framework |
| BS EN 54-3:2014 | Fire detection and fire alarm systems Fire alarm devices. Sounders |
| BS EN 12158-1 : 2000 | BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS |
| UNE-EN 13160-5:2017 | Leak detection systems - Part 5: Requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems |
| BS EN ISO 7218 : 2007 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - GENERAL REQUIREMENTS AND GUIDANCE FOR MICROBIOLOGICAL EXAMINATIONS |
| BS EN 2859:2006 | Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature) / 235°C |
| BS EN 1036-2:2008 | Glass in building. Mirrors from silver-coated float glass for internal use Evaluation of conformity; product standard |
| BS EN 14915 : 2013 | SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| BS EN 12798:2007 | Transport quality management system. Road rail and inland navigation transport. Quality management system requirements to supplement EN ISO 9001 for the transport of dangerous goods, with regard to safety |
| BS EN ISO 10012:2003 | Measurement management systems. Requirements for measurement processes and measuring equipment |
| BS EN 14081-1:2016 | Timber structures. Strength graded structural timber with rectangular cross section General requirements |
| IEC 61496-1:2012 | Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests |
| BS EN 12150-2:2004 | Glass in building. Thermally toughened soda lime silicate safety glass Evaluation of conformity/Product standard |
| BS EN 1337-4:2004 | Structural bearings Roller bearings |
| BS EN 868-1:1997 | Packaging materials and systems for medical devices which are to be sterilized General requirements and test methods |
| BS EN 490 : 2011 | CONCRETE ROOFING TILES AND FITTINGS FOR ROOF COVERING AND WALL CLADDING - PRODUCT SPECIFICATIONS |
| BS EN 12842:2012 | Ductile iron fittings for PVC-U or PE piping systems. Requirements and test methods |
| UNE-EN 13249:2017 | Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion) |
| BS EN 14496:2005 | Gypsum based adhesives for thermal/acoustic insulation composite panelsa nd plasterboards. Definitions, requirements and test methods |
| ISO 10011-1:1990 | Guidelines for auditing quality systems Part 1: Auditing |
| BS EN 15344:2007 | Plastics. Recycled plastics. Characterization of polyethylene (PE) recyclates |
| BS EN 12952-2:2011 | Water-tube boilers and auxiliary installations Materials for pressure parts of boilers and accessories |
| BS EN 13693 : 2004 | PRECAST CONCRETE PRODUCTS - SPECIAL ROOF ELEMENTS |
| BS EN 14384:2005 | Pillar fire hydrants |
| ISO 14005:2010 | Environmental management systems Guidelines for the phased implementation of an environmental management system, including the use of environmental performance evaluation |
| BS EN 12668-2:2010 | Non-destructive testing. Characterization and verification of ultrasonic examination equipment Probes |
| BS EN 15346:2014 | Plastics. Recycled plastics. Characterization of poly(vinyl chloride) (PVC) recyclates |
| BS EN 13085:2001 | Wallcoverings. Specification for cork rolls |
| BS EN 534 : 2006 | CORRUGATED BITUMEN SHEETS - PRODUCT SPECIFICATION AND TEST METHODS |
| BS EN 1757-3:2002 | Safety of industrial trucks. Pedestrian propelled trucks Platform trucks |
| BS EN 1653:1998 | Copper and copper alloys. Plate, sheet and circles for boilers, pressure vessels and hot water storage units |
| BS EN 13859-1:2014 | Flexible sheets for waterproofing. Definitions and characteristics of underlays Underlays for discontinuous roofing |
| BS EN 13850:2012 | Postal Services. Quality of Services. Measurement of the transit time of end-to-end services for single piece priority mail and first class mail |
| BS EN 1804-2 : 2001 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 2: POWER SET LEGS AND RAMS |
| BS EN 1319:2009 | Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW |
| BS EN 45510-6-2:1998 | Guide for the procurement of power station equipment. Turbine auxiliaries Feedwater heaters |
| BS EN ISO 19114:2005 | Geographic information. Quality evaluation procedures |
| BS EN 13771-2:2017 | Compressors and condensing units for refrigeration. Performance testing and test methods Condensing units |
| BS EN 858-1:2002 | Separator systems for light liquids (e.g. oil and petrol) Principles of product design, performance and testing, marking and quality control |
| BS EN 13964:2014 | Suspended ceilings. Requirements and test methods |
| BS EN 13924:2006 | Bitumen and bituminous binders. Specifications for hard paving grade bitumens |
| BS EN ISO 10472-1:2008 | Safety requirements for industrial laundry machinery Common requirements |
| BS EN 14909:2012 | Flexible sheets for waterproofing. Plastic and rubber damp proof courses. Definitions and characteristics |
| BS EN 61189-2:2006 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies Test methods for materials for interconnection structures |
| BS EN 14626:2012 | Ambient air. Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy |
| EN 61897:1998 | Overhead lines - Requirements and tests for Stockbridge type aeolian vibration dampers |
| BS EN 12566-1:2000 | Small wastewater treatment systems for up to 50 PT Prefabricated septic tanks |
| BS EN 10219-1:2006 | Cold formed welded structural hollow sections of non-alloy and fine grain steels Technical delivery requirements |
| ISO 6789:2003 | Assembly tools for screws and nuts Hand torque tools Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure |
| BS EN 1677-6 : 2001 | COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4 |
| BS EN 61557-15:2014 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems |
| BS EN 13293:2002 | Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless normalized carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1 litre for carbon dioxide |
| BS EN 9100:2009 | Quality Management Systems. Requirements for Aviation, Space and Defense Organizations |
| ISO/IEC 15423:2009 | Information technology Automatic identification and data capture techniques Bar code scanner and decoder performance testing |
| ISO 14554-2:2013 | Quality requirements for welding — Resistance welding of metallic materials — Part 2: Elementary quality requirements |
| BS EN 4497:2005 | Aerospace series. Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating. Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| BS EN 13566-1:2002 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks General |
| BS EN 13101:2002 | Steps for underground man entry chambers. Requirements, marking, testing and evaluation of conformity |
| ISO 29990:2010 | Learning services for non-formal education and training Basic requirements for service providers |
| ISO/IEC 20000-1:2011 | Information technology Service management Part 1: Service management system requirements |
| EN 61191-3:2017 | Printed board assemblies - Part 3: Sectional specification - Requirements for through-hole mount soldered assemblies |
| CEN ISO/TR 3834-6:2007 | Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing ISO 3834 (ISO/TR 3834-6:2007) |
| DIN EN 10312:2005-12 | Welded stainless steel tubes for the conveyance of water and other aqueous liquids - Technical delivery conditions; German version EN 10312:2002 + A1:2005 |
| CEN/TS 1451-2:2012 | Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity |
| UNI EN ISO 19902 : 2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES |
| EN 10080:2005 | Steel for the reinforcement of concrete - Weldable reinforcing steel - General |
| EN 61192-5 : 2007 | WORKMANSHIP REQUIREMENTS FOR SOLDERED ELECTRONIC ASSEMBLIES - PART 5: REWORK, MODIFICATION AND REPAIR OF SOLDERED ELECTRONIC ASSEMBLIES |
| DIN EN ISO 19258:2011-09 | SOIL QUALITY - GUIDANCE ON THE DETERMINATION OF BACKGROUND VALUES (ISO 19258:2005) |
| DIN EN 15189:2007-02 | Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods |
| CEN/TS 12200-2:2017 | Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity |
| DIN EN 1:2007-12 | FLUID OIL STOVES WITH VAPORIZING BURNERS |
| EN 13256:2016 | Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures |
| CEN/TS 14421:2006 | Hose tail and ferrule for crimping and swaging |
| EN ISO 13174:2012 | Cathodic protection of harbour installations (ISO 13174:2012) |
| DIN EN 13411-6:2009-04 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET |
| EN 12507:2005 | Transportation services - Guidance notes on the application of EN ISO 9001:2000 to the road transportation, storage, distribution and railway goods industries |
| EN 13481-2:2012+A1:2017 | Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers |
| EN 12668-2:2010 | Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes |
| DIN EN 14817:2006-08 | Railway applications - Suspension components - Air spring control elements |
| CEN/TR 14585-2:2006 | Corrugated metal hose assemblies for pressure applications - Part 2: Guidance on the use of conformity assessment procedures |
| EN 12966:2014 | Road vertical signs - Variable message traffic signs |
| EN 13055:2016 | Lightweight aggregates |
| CEN/TS 15358:2006 | Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels |
| EN 61513:2013 | Nuclear power plants - Instrumentation and control important to safety - General requirements for systems |
| EN 12583:2014 | Gas Infrastructure - Compressor stations - Functional requirements |
| EN 13252:2016 | Geotextiles and geotextile-related products - Characteristics required for use in drainage systems |
| EN 13566-1:2002 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General |
| EN 12591:2009 | Bitumen and bituminous binders - Specifications for paving grade bitumens |
| EN 50581:2012 | Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances |
| EN 13481-4:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 4: Fastening systems for steel sleepers |
| EN 13063-3:2007 | Chimneys - System chimneys with clay/ceramic flue liners - Part 3: Requirements and test methods for air flue system chimneys |
| DIN EN 12094-3:2003-07 | FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 3: REQUIREMENTS AND TEST METHODS FOR MANUAL TRIGGERING AND STOP DEVICES |
| EN 13148:2010 | Copper and copper alloys - Hot-dip tinned strip |
| CEN/TS 15331:2005 | Criteria for design, management and control of maintenance services for buildings |
| EN 12446:2011 | Chimneys - Components - Concrete outer wall elements |
| EN 1036-2:2008 | Glass in building - Mirrors from silver-coated float glass for internal use - Part 2: Evaluation of conformity; product standard |
| EN 13101:2002 | Steps for underground man entry chambers - Requirements, marking, testing and evaluation of conformity |
| DIN EN 14287:2004-09 | Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components |
| EN 62703:2013 | Expression of performance of fluorometric oxygen analyzers in liquid media |
| EN 13063-2:2005+A1:2007 | Chimneys - System chimneys with clay/ceramic flue liners - Part 2: Requirements and test methods under wet conditions |
| DIN EN 12094-6:2006-07 | Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices |
| CR 12804:1997 | Conceptual model and taxonomy for information systems engineering |
| EN 13160-5:2016 | Leak detection systems - Part 5: Requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems |
| DIN EN 516:2006-04 | Prefabricated accessories for roofing - Installations for roof access - Walkways, treads and steps |
| EN 12094-16:2003 | Fixed firefighting systems - Components for gas extinguishing systems - Part 16: Requirements and test methods for odorizing devices for CO2 low pressure systems |
| CEN ISO/TS 29001:2011 | Petroleum, petrochemical and natural gas industries - Sector-specific quality management systems - Requirements for product and service supply organizations (ISO/TS 29001:2010) |
| EN 12952-6:2011 | Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler |
| DIN EN 10255:2007-07 | Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions (includes Amendment A1:2007) |
| CEN/TS 14816:2008 | Fixed firefighting systems - Water spray systems - Design, installation and maintenance |
| EN 45510-4-2 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - BOILER AUXILIARIES - GAS-AIR, STEAM AIR AND GAS-GAS HEATERS |
| CEN/TS 16880:2015 | Service excellence - Creating outstanding customer experiences through service excellence |
| EN 45510-8-1:1998 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 8-1: CONTROL AND INSTRUMENTATION |
| EN 61069-1:2016 | Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 1: Terminology and basic concepts |
| DIN EN 14321-2:2005-10 | Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard |
| EN ISO/IEC 17065:2012 | Conformity assessment - Requirements for bodies certifying products, processes and services (ISO/IEC 17065:2012) |
| DIN EN 10311:2005-08 | Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids |
| DIN EN 54-21:2006-08 | Fire detection and fire alarm systems - Part 21: Alarm transmission and fault warning routing equipment |
| DIN EN 15824:2017-09 | SPECIFICATIONS FOR EXTERNAL RENDERS AND INTERNAL PLASTERS BASED ON ORGANIC BINDERS |
| DIN EN 13771-1:2017-04 | COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 1: REFRIGERANT COMPRESSORS |
| DIN EN 54-28:2016-07 | Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors |
| DIN EN 15161:2007-02 | Water conditioning equipment inside buildings - Installation, operation, maintenance and repair |
| EN 61069-2:2016 | Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 2: Assessment methodology |
| EN 61191-1:2013 | PRINTED BOARD ASSEMBLIES - PART 1: GENERIC SPECIFICATION - REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES USING SURFACE MOUNT AND RELATED ASSEMBLY TECHNOLOGIES (IEC 61191-1:2013) |
| CEN/TS 14773:2004 | Postal services - Quality of service - Measurement of loss and substantial delay in priority and first class single piece mail using a survey of test letters |
| DIN EN 295-10:2005-05 | VITRIFIED CLAY PIPES AND FITTINGS AND PIPE JOINTS FOR DRAINS AND SEWERS - PART 10: PERFORMANCE REQUIREMENTS |
| DIN EN 10021:2007-03 | General technical delivery conditions for steel products |
| DIN EN 544:2011-09 | Bitumen shingles with mineral and/or synthetic reinforcements - Product specification and test methods |
| EN 61192-2:2003 | Workmanship requirements for soldered electronic assemblies - Part 2: Surface-mount assemblies |
| DIN EN ISO 6789-2:2017-07 | ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - PART 2: REQUIREMENTS FOR CALIBRATION AND DETERMINATION OF MEASUREMENT UNCERTAINTY (ISO 6789-2:2017) |
| IPC J STD 006 : C | REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDERS FOR ELECTRONIC SOLDERING APPLICATIONS |
| EN 1463-1:2009 | Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements |
| DIN EN 14525:2005-02 | Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: Ductile iron, grey iron, steel, PVC-U, PE, fibre-cement |
| EN 61869-1:2009 | Instrument transformers - Part 1: General requirements |
| EN 12094-1:2003 | Fixed firefighting systems - Components for gas extinguishing systems - Part 1: Requirements and test methods for electrical automatic control and delay devices |
| EN 12450:2012 | Copper and copper alloys - Seamless, round copper capillary tubes |
| DIN EN 14637:2008-01 | Building hardware - Electrically controlled hold-open systems for fire/smoke door assemblies - Requirements, test methods, application and maintenance |
| DIN EN 12094-4:2004-10 | Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators; German version EN 12094-4:2004 |
| EN 13293:2002 | Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless normalized carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1 litre for carbon dioxide |
| EN 13251:2016 | Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures |
| DIN EN 14915:2013-12 | SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, REQUIREMENTS AND MARKING |
| EN 50598-3:2015 | Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Part 3: Quantitative eco design approach through life cycle assessment including product category rules and the content of environmental declarations |
| CEN/TS 45545-2:2009 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components |
| EN 10088-5:2009 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
| EN 10343:2009 | Steels for quenching and tempering for construction purposes - Technical delivery conditions |
| EN 1337-3:2005 | Structural bearings - Part 3: Elastomeric bearings |
| EN 61189-5-2:2015 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-2: General test methods for materials and assemblies - Soldering flux for printed board assemblies |
| EN 13380:2001 | General requirements for components used for renovation and repair of drain and sewer systems outside buildings |
| EN 12385-8:2002 | Steel wire ropes - Safety - Part 8: Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons |
| EN 61325:1995 | Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic or glass insulator units for d.c. systems - Definitions, test methods and acceptance criteria |
| EN 12452:2012 | Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers |
| EN 45510-6-1 : 1998 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-1: TURBINE AUXILIARIES - DEAERATORS |
| EN 45510-6-7 : 1998 | Guide for procurement of power station equipment - Part 6-7: Turbine auxiliaries - Moisture separator reheaters |
| CEN/TS 1452-7:2014 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 7: Guidance for the assessment of conformity |
| EN 12101-8:2011 | Smoke and heat control systems - Part 8: Smoke control dampers |
| EN 12839:2012 | Precast concrete products - Elements for fences |
| EN 12209:2016 | Building hardware - Mechanically operated locks and locking plates - Requirements and test methods |
| EN 12094-4:2004 | Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators |
| EN 1591-4:2013 | Flanges and their joints - Part 4: Qualification of personnel competency in the assembly of the bolted connections of critical service pressurized systems |
| EN 1065:1998 | Adjustable telescopic steel props - Product specifications, design and assessment by calculation and tests |
| DIN EN 14889-2:2006-11 | Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and conformity |
| DIN EN ISO 14937:2010-03 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
| DIN EN 14436:2004-11 | Copper and copper alloys - Electrolytically tinned strip |
| DIN EN 450-2:2005-05 | Fly ash for concrete - Part 2: Conformity evaluation |
| EN 50215:2009 | Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service |
| DIN EN 12094-5:2006-07 | Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators |
| EN 12573-1:2000 | Welded static non-pressurized thermoplastic tanks - Part 1: General principles |
| CEN/TS 12201-7:2014 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity |
| CEN/TS 1555-7:2013 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity |
| DIN EN 13411-1:2009-02 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 1: THIMBLES FOR STEEL WIRE ROPE SLINGS |
| DIN EN 490:2017-04 | Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications (includes Amendment :2017) |
| DIN EN 15088:2006-03 | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery; German version EN 15088:2005 |
| EN 12094-9:2003 | Fixed firefighting systems - Components for gas extinguishing systems - Part 9: Requirements and test methods for special fire detectors |
| EN 2755:2009 | Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Elevated load at ambient temperature - Technical specification |
| EN 45510-6-3 : 1998 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-3: TURBINE AUXILIARIES - CONDENSER PLANT |
| EN 45510-5-1 : 1998 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-1: STEAM TURBINES |
| DIN EN 14733:2010-12 | BITUMEN AND BITUMINOUS BINDERS - BITUMINOUS EMULSIONS, FLUXED AND CUT-BACK BITUMEN FACTORY PRODUCTION CONTROL |
| EN 13279-1:2008 | Gypsum binders and gypsum plasters - Part 1: Definitions and requirements |
| DIN EN 545:2011-09 | Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
| DIN EN 13674-2:2011-01 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| DIN EN 1090-1:2012-02 | Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components (includes Amendment A1:2011) |
| EN 61192-1:2003 | Workmanship requirements for soldered electronic assemblies - Part 1: General |
| DIN EN 16001:2009-08 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| DIN EN 13411-7:2009-04 | Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket (includes Amendment A1:2008) |
| DIN EN 13924:2006-07 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR HARD PAVING GRADE BITUMENS |
| EN 45510-4-9 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-9: BOILER AUXILIARIES - SOOTBLOWERS |
| DIN EN 1457-1:2012-04 | Chimneys - Clay/ceramic flue liners - Part 1: Flue liners operating under dry conditions - Requirements and test methods |
| DIN EN 14814:2016-09 | ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS FOR FLUIDS UNDER PRESSURE - SPECIFICATIONS |
| DIN EN 534:2010-07 | Corrugated bitumen sheets - Product specification and test methods (includes Amendment A1:2010) |
| EN 50483-1:2009 | Test requirements for low voltage aerial bundled cable accessories - Part 1: Generalities |
| DIN EN 13063-2:2007-10 | CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 2: REQUIREMENTS AND TEST METHODS UNDER WET CONDITIONS |
| ASHRAE 138 : 2013(R 2016) | METHOD OF TESTING FOR RATING CEILING PANELS FOR SENSIBLE HEATING AND COOLING |
| EN 60601-1-4:1996/A1:1999 | MEDICAL ELECTRICAL EQUIPMENT - GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD: PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS |
| DIN EN 54-16:2008-06 | Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment |
| DIN EN 517:2006-05 | Prefabricated accessories for roofing - Roof safety hooks |
| DIN EN 14286:2008-11 | ALUMINIUM AND ALUMINIUM ALLOYS - WELDABLE ROLLED PRODUCTS FOR TANKS FOR THE STORAGE AND TRANSPORTATION OF DANGEROUS GOODS |
| EN 61189-5 : 2006 | TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5: TEST METHODS FOR PRINTED BOARD ASSEMBLIES |
| EN 60076-1:2011 | POWER TRANSFORMERS - PART 1: GENERAL (IEC 60076-1:2011) |
| DIN EN 16222:2012-12 | Cathodic protection of ship hulls |
| EN 13298:2003 | Railway applications - Suspension components - Helical suspension springs, steel |
| DIN EN 14359:2017-09 | GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
| DIN EN 14989-1:2007-05 | Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 1: Vertical air/flue terminals for C6-type appliances |
| DIN EN 10080:2005-08 | STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - GENERAL |
| EN 13282-3:2015 | Hydraulic road binders - Part 3: Conformity evaluation |
| DIN EN 45012:1990-05 | GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS |
| EN 61811-50:2002 | Electromechanical all-or-nothing relays - Part 50: Sectional specification - Electromechanical all-or-nothing telecom relays of assessed quality |
| EN 13085:2001 | Wallcoverings - Specification for cork rolls |
| EN 60903 : 2003 COR 2005 | LIVE WORKING - GLOVES OF INSULATING MATERIAL |
| DIN EN 15001-2:2010-04 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance |
| DIN EN 1457-2:2012-04 | Chimneys - Clay/ceramic flue liners - Part 2: Flue liners operating under wet conditions - Requirements and test methods |
| EN 50405 : 2015 AMD 1 2016 | RAILWAY APPLICATIONS - CURRENT COLLECTION SYSTEMS - PANTOGRAPHS, TESTING METHODS FOR CONTACT STRIPS |
| EN 60896-21:2004 | Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test |
| EN 10255:2004+A1:2007 | Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions |
| EN 13481-3:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 3: Fastening systems for wood sleepers |
| DIN EN 14353:2017-09 | METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| CEN ISO/TS 14907-1:2015 | Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO/TS 14907-1:2015) |
| EN 61207-3:2002 | Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers |
| EN 61191-4:2017 | Printed board assemblies - Part 4: Sectional specification - Requirements for terminal soldered assemblies |
| UNI EN ISO 3452-2 : 2014 | NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 2: TESTING OF PENETRANT MATERIALS |
| EN 13212:2011 | Road marking materials - Requirements for factory production control |
| EN 13481-8:2006 | Railway applications - Track - Performance requirements for fastening systems - Part 8: Fastening systems for track with heavy axle loads |
| CEN/TR 16469:2013 | Hydrometry - Measurement of the rainfall intensity (liquid precipitation): requirements, calibration methods and field measurements |
| EN 60746-2:2003 | Expression of performance of electrochemical analyzers - Part 2: pH value |
| EN ISO/IEC 17020:2012 | Conformity assessment - Requirements for the operation of various types of bodies performing inspection (ISO/IEC 17020:2012) |
| CEN/TS 14632:2012 | Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity |
| EN 61190-1-1:2002 | Attachment materials for electronic assembly - Part 1-1: Requirements for soldering fluxes for high-quality interconnections in electronics assembly |
| EN 12158-1:2000+A1:2010 | Builders' hoists for goods - Part 1: Hoists with accessible platforms |
| EN 61020-1:2009 | Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification |
| EN 61014:2003 | Programmes for reliability growth |
| EN 61160:2005 | Design review |
| EN 50629:2015/A2:2018 | ENERGY PERFORMANCE OF LARGE POWER TRANSFORMERS (U[M] > 36 KV OR S[R] >= 40 MVA) |
| EN 60794-4-20:2012 | OPTICAL FIBRE CABLES - PART 4-20: AERIAL OPTICAL CABLES ALONG ELECTRICAL POWER LINES - FAMILY SPECIFICATION FOR ADSS (ALL DIELECTRIC SELF SUPPORTED) OPTICAL CABLES (IEC 60794-4-20:2012) |
| DIN EN 14628:2006-01 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYETHYLENE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS |
| ASME B16.33 : 2012 : R2017 | MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN GAS PIPING SYSTEMS UPTO 175 PSI (SIZES NPS 1/2 THROUGH NPS 2) |
| ASME B16.33 : 2012 | MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN GAS PIPING SYSTEMS UPTO 175 PSI (SIZES NPS 1/2 THROUGH NPS 2) |
| ASME B16.4 : 2016 | GRAY IRON THREADED FITTINGS: CLASSES 125 AND 250 |
| UNE-EN 1804-1:2003 | Machines for underground mines. Safety requirements for hydraulic powered roof supports. Part 1: Support units and general requiremetns. |
| CSA ISO 9000 : 2016 | QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY |
| ASME B16.47 : 2017 | LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD |
| UNE-EN 1804-2:2003 | Machines for underground mines. Safety requirements for hydraulic powered roof supports. Part 2: Power set legs and rams. |
| UNE-EN 13260:2010 | Railway applications - Wheelsets and bogies - Wheelsets - Product requirements |
| ASME B16.1 : 2015 | Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 |
| ASME B16.40 : 2013 | MANUALLY OPERATED THERMOPLASTIC GAS SHUTOFFS AND VALVES IN GAS DISTRIBUTION SYSTEMS |
| UNE-EN 16361:2014 | Power operated pedestrian doors - Product standard, performance characteristics - Pedestrian doorsets, other than swing type, initially designed for installation with power operation without resistance to fire and smoke leakage characteristics |
| UNE-EN 15434:2007 | Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) |
| I.S. EN 2882:2006 | AEROSPACE SERIES - NUTS, HEXAGONAL, SELF-LOCKING, WITH COUNTERBORE AND CAPTIVE WASHER, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| ASME B18.18 : 2017 | QUALITY ASSURANCE FOR FASTENERS |
| ASME B16.3 : 2016 | MALLEABLE IRON THREADED FITTINGS: CLASSES 150 AND 300 |
| I.S. EN 14620-1:2006 | DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLATBOTTOMED STEEL TANKS FOR THE STORAGE OF REFRIGERATED, LIQUEFIED GASES WITH OPERATING TEMPERATURES BETWEEN 0 DEGREE C AND -165 DEGREE C - PART 1: GENERAL |
| ASME B16.18 : 2012 | Cast Copper Alloy Solder Joint Pressure Fittings (B16.18 - 2012)<br> |
| ASME B16.38 : 2012 : R2017 | LARGE METALLIC VALVES FOR GAS DISTRIBUTION - MANUALLY OPERATED, NPS 2[1/2] (DN 65) TO NPS 12 (DN 300), 125 PSIG (8.6 BAR) MAXIMUM |
| ASME B16.38 : 2012 | LARGE METALLIC VALVES FOR GAS DISTRIBUTION - MANUALLY OPERATED, NPS 2[1/2] (DN 65) TO NPS 12 (DN 300), 125 PSIG (8.6 BAR) MAXIMUM |
| CSA ISO 10012 : 2003 | MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT |
| CAN/CSA-ISO/IEC/IEEE 24748-4:18 | Systems and software engineering — Life cycle management — Part 4: Systems engineering planning (Adopted ISO/IEC/IEEE 24748-4:2016, first edition, 2016-05-15) |
| ASME B16.20 : 2017 | METALLIC GASKETS FOR PIPE FLANGES |
| UNE-EN 14915:2013 | Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking |
| CSA ISO/IEC 27003 : 2010 : R2015 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEM IMPLEMENTATION GUIDANCE |
| UNE-EN 1279-5:2006 | Glass in building - Insulating glass units - Part 5: Evaluation of conformity |
| CSA ISO 20121 : 2013 | EVENT SUSTAINABILITY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| UNE-EN 13674-2:2007 | Railway applications - Track - Rail - Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above |
| CSA/ANSI NGV3.1 : 2014 | FUEL SYSTEM COMPONENTS FOR COMPRESSED NATURAL GAS POWERED VEHICLES |
| CAN/CSA-ISO/IEC TS 33052:18 | Information technology ? Process reference model (PRM) for information security management (Adopted ISO/IEC TS 33052:2016, first edition, 2016-06-15) |
| I.S. EN 15167-2:2007 | GROUND GRANULATED BLAST FURNACE SLAG FOR USE IN CONCRETE, MORTAR AND GROUT - PART 2: CONFORMITY EVALUATION |
| CSA/ANSI NGV2 : 2016 | COMPRESSED NATURAL GAS VEHICLE FUEL CONTAINERS |
| ASME B16.50 : 2013 | WROUGHT COPPER AND COPPER ALLOY BRAZE-JOINT PRESSURE FITTINGS |
| CAN/CSA-ISO/IEC TR 29110-5-2-1:18 | Systems and software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 5-2-1: Organizational management guidelines (Adopted ISO/IEC TR 29110-5-2-1:2016, first edition, 2016-06-15) |
| API RP 2A-LRFD : 2019 | Planning, Designing, and Constructing Fixed Offshore Platforms - Load and Resistance Factor Design |
| API SPEC 6D:2021 | Specification for Valves |
| API SPEC 19LH:2019 | Liner Hanger Equipment |
| ASME B16.9:2018 | Factory-Made Wrought Buttwelding Fittings |
| CAN/CSA-ISO/IEC TR 20000-12:18 | Information technology — Service management — Part 12: Guidance on the relationship between ISO/IEC 20000-1:2011 and service management frameworks: CMMI-SVC (Adopted ISO/IEC TR 20000-12:2016, first edition, 2016-10-01) |
| IPC 1601 CHINESE : 2016 | PRINTED BOARD HANDLING AND STORAGE GUIDELINES |
| BS 5781-1(1992) : AMD 8147 | QUALITY ASSURANCE REQUIREMENTS FOR MEASURING EQUIPMENT - METROLOGICAL CONFIRMATION SYSTEM FOR MEASURING EQUIPMENT |
| UNE-EN 16153:2013 | Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods |
| CSA/ANSI HGV 2 : 2014 | COMPRESSED HYDROGEN GAS VEHICLE FUEL CONTAINERS |
| ASME B16.52 : 2018 | FORGED NONFERROUS FITTINGS, SOCKET-WELDING AND THREADED (TITANIUM, TITANIUM ALLOYS, ALUMINIUM, AND ALUMINIUM ALLOYS |
| ASME B16.15 : 2013 | CAST COPPER ALLOY THREADED FITTINGS: CLASSES 125 AND 250 |
| ONORM EN 9104-003 : 2010 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 003: REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM (AQMS) AUDITOR TRAINING AND QUALIFICATION |
| UNE-EN 13986:2006+A1:2015 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| UNE-EN 14351-1:2006 | Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics |
| CSA ISO/IEC 27003 : 2010 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEM IMPLEMENTATION GUIDANCE |
| ASME B16.51 : 2013 | Copper and Copper Alloy Press-Connect Pressure Fittings |
| ASME B16.23 : 2016 | CAST COPPER ALLOY SOLDER JOINT DRAINAGE FITTINGS: DWV |
| ASME B16.44 : 2012 : R2017 | MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN ABOVEGROUND PIPING SYSTEMS UP TO 5 PSI |
| UNE-EN 13481-5:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 5: Fastening systems for slab track with rail on the surface or rail embedded in a channel |
| ASME B16.44 : 2012 | MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN ABOVEGROUND PIPING SYSTEMS UP TO 5 PSI |
| UNE-EN 13674-3:2007 | Railway applications - Track - Rail - Part 3: Check rails |
| UNE-EN 14055:2011 | WC and urinal flushing cisterns |
| UNE-EN 1168:2006 | Precast concrete products - Hollow core slabs |
| UNE-EN 13967:2013 | Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics |
| CSA ISO/IEC 19770-1 :2013 | INFORMATION TECHNOLOGY - SOFTWARE ASSET MANAGEMENT - PART 1: PROCESSES AND TIERED ASSESSMENT OF CONFORMANCE |
| CSA ISO 10012 : 2003 : R2013 | MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT |
| API SPEC 6D:2014+ERR 2:2014 | Specification for Pipeline and Piping Valves<br> |
| API Q1:2013+ADD2:2018 | Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum and Natural Gas Industry |
| PREN 6095 : 200P1 | AEROSPACE SERIES - ROTARY FASTENERS - STRUCTURAL AND NON-STRUCTURAL APPLICATIONS - TECHNICAL SPECIFICATION |
| ASME PVHO 1 : 2016 | SAFETY STANDARD FOR PRESSURE VESSELS FOR HUMAN OCCUPANCY |
| CSA ISO/IEC 19770-1 : 2013 : R2017 | INFORMATION TECHNOLOGY - SOFTWARE ASSET MANAGEMENT - PART 1: PROCESSES AND TIERED ASSESSMENT OF CONFORMANCE |
| ISO 10001:2007 | Quality management Customer satisfaction Guidelines for codes of conduct for organizations |
| AS/NZS ISO 13918:2020 | Welding - Studs and ceramic ferrules for arc stud welding |
| AS ISO 30401:2019 | Knowledge management systems - Requirements |
| ISO 19011:2011 | Guidelines for auditing management systems |
| ISO 10015:1999 | Quality management Guidelines for training |
| ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| AS/NZS ISO 19011:2019 | Guidelines for auditing management systems |
| AS ISO 37101:2020 | Sustainable development in communities - Management system for sustainable development - Requirements with guidance for use |
| AS/NZS ISO/IEC 20000.3:2020 | Information technology - Service management Guidance on scope definition and applicability of AS/NZS ISO/IEC 20000.1 |
| ISO 31000:2009 | Risk management Principles and guidelines |
| AS ISO 37001:2019 | Anti-bribery management systems - Requirements with guidance for use |
| IEC 61160:2005 | Design review |
| AS/NZS ISO/IEC 20000.1:2019 | Information technology - Service management Service management system requirements |
| AS ISO 20387:2020 | Biotechnology - Biobanking - General requirements for biobanking |
| AS ISO 22301:2020 | Security and resilience - Business continuity management systems - Requirements |
| ISO 10019:2005 | Guidelines for the selection of quality management system consultants and use of their services |
| ISO 10004:2012 | Quality management Customer satisfaction Guidelines for monitoring and measuring |
| ISO 10014:2006 | Quality management Guidelines for realizing financial and economic benefits |
| AS/NZS ISO/IEC 20000.10:2019 | Information technology - Service management Concepts and vocabulary |
| ISO 10005:2005 | Quality management systems Guidelines for quality plans |
| ISO 10008:2013 | Quality management — Customer satisfaction — Guidelines for business-to-consumer electronic commerce transactions |
| ISO 10003:2007 | Quality management Customer satisfaction Guidelines for dispute resolution external to organizations |
| SA TR ISO 30406:2019 | Human resource management - Sustainable employability management for organizations |
| AS ISO 55002:2019 | Asset management - Management systems - Guidelines for the application of ISO 55001 |
| ISO 10006:2003 | Quality management systems Guidelines for quality management in projects |
| ISO 10018:2012 | Quality management Guidelines on people involvement and competence |
| AS ISO 13007.5:2020 | Ceramic tiles - Grouts and adhesives Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic tiling bonded with adhesives |
| ISO 10002:2014 | Quality management Customer satisfaction Guidelines for complaints handling in organizations |
| ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
| ISO/TR 10013:2001 | Guidelines for quality management system documentation |
| IEC 60300-1:2014 | Dependability management - Part 1: Guidance for management and application |
| ISO 14001:2015 | Environmental management systems — Requirements with guidance for use |
| AS/NZS ISO/IEC 20000.2:2020 | Information technology - Service management Guidance on the application of service management systems |
| AS ISO 27914:2019 | Carbon dioxide capture, transportation and geological storage - Geological storage |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| ISO 37500:2014 | Guidance on outsourcing |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| SA TS ISO 55010:2020 | Asset management - Guidance on the alignment of financial and non-financial functions in asset management |
| SA HB 13485:2020 | AS ISO 13485:2017 - Medical devices - A practical guide |
| ISO/IEC 90003:2014 | Software engineering Guidelines for the application of ISO 9001:2008 to computer software |
| ISO 10007:2017 | Quality management — Guidelines for configuration management |
| AS ISO 20658:2019 | Medical laboratories - Requirements for collection, transport, receipt, and handling of samples |
| AS ISO 3452.6:2020 | Non-destructive testing - Penetrant testing Penetrant testing at temperatures lower than 10 °C |
| AS ISO/IEC/IEEE 12207:2019 | Systems and software engineering - Software life cycle processes |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.