COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS

Available format(s)

Hardcopy

Superseded date

03-09-2011

Superseded by

305/2011 : 2011 AMD 2 2014

Language(s)

English

Published date

01-12-2013

Publisher

European Union

Free

Excluding Tax where applicable

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Applies to construction products, which are defined as any products produced with a view to their incorporation in a permanent manner in construction works. Products may only be placed on the market if they are fit for their intended use. They must be such that works in which they are incorporated satisfy the essential requirements with regard to mechanical strength and stability, safety in case of fire, hygiene, health and the environment, safety in use, protection against noise and energy economy and heat retention for an economically reasonable working life.

DocumentType	Miscellaneous Product
Pages	15
PublisherName	European Union
Status	Superseded
SupersededBy	305/2011 : 2011 AMD 2 2014

08/30169534 DC : DRAFT APR 2008	BS EN 13163 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION
PD CEN/TR 16410:2012	Construction products. Assessment of release of dangerous substances. Barriers to use. Extension to CEN/TR 15855 Barriers to trade
11/30249117 DC : 0	BS EN 14342 - WOOD FLOORING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
11/30205541 DC : 0	BS EN 54-7 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 7: SMOKE DETECTORS - POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONISATION
15/30320587 DC : DRAFT AUG 2015	BS 6744 - STAINLESS STEEL BARS - REINFORCEMENT OF CONCRETE - REQUIREMENTS AND TEST METHODS
04/30111755 DC : 0	EN 14909 - FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF COURSES - DEFINITIONS AND CHARACTERISTICS
BS EN 60335-2-91:2003	Specification for safety of household and similar electrical appliances Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers
99/100965 DC : DRAFT FEB 1999	PREN 13493 - REQUIRED CHARACTERISTICS FOR GEOMEMBRANES AND GEOMEMBRANE-RELATED PRODUCTS USED IN SOLID WASTE STORAGES AND WASTE DISPOSAL SITES
BS EN 14846:2008	Building hardware. Locks and latches. Electromechanically operated locks and striking plates. Requirements and test methods
BS EN 15288-1 : 2008	SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN
BS 8303-1:1994	Installation of domestic heating and cooking appliances burning solid mineral fuels Installation of domestic heating and cooking appliances burning solid mineral fuels. Specification for the design of installations
13/30271503 DC : 0	BS 5534 - SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE
BS EN 14695:2010	Flexible sheets for waterproofing. Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete. Definitions and characteristics
14/30287372 DC : 0	BS EN 12897 - WATER SUPPLY - SPECIFICATION FOR INDIRECTLY HEATED UNVENTED (CLOSED) STORAGE WATER HEATERS
BS EN 10088-5:2009	Stainless steels Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
12/30256100 DC : 0	BS EN 12878 - PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST
I.S. EN 50399:2011	COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - TEST APPARATUS, PROCEDURES, RESULTS
BS EN 14064-1:2010	Thermal insulation products for buildings. In-situ formed loose-fill mineral wool (MW) products Specification for the loose-fill products before installation
12/30235100 DC : DRAFT JAN 2012	BS EN 14428 AMD 1 - SHOWER ENCLOSURES - FUNCTIONAL REQUIREMENTS AND TEST METHODS
PREN 13859-2 : DRAFT 2013	FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 2: UNDERLAYS FOR WALLS
BS EN 15069:2008	Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel
11/30239917 DC : 0	BS EN 13249 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF ROADS AND OTHER TRAFFICKED AREAS (EXCLUDING RAILWAYS AND ASPHALT INCLUSION)
12/30254424 DC : DRAFT JAN 2012	BS EN 12058 - NATURAL STONE PRODUCTS - SLABS FOR FLOORS AND STAIRS - REQUIREMENTS
12/30263172 DC : 0	BS EN 1935 - BUILDING HARDWARE - SINGLE-AXIS HINGES - REQUIREMENTS AND TEST METHODS
DIN EN 14695:2010-05	Flexible sheets for waterproofing - Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics; German version EN 14695:2010
13/30217369 DC : 0	BS EN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
10/30212171 DC : 0	BS EN 15037-5 - PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 5: LIGHTWEIGHT BLOCKS FOR SIMPLE FORMWORK
BS 10621(2007) : 2007	THIEF RESISTANT DUAL-MODE LOCK ASSEMBLY
PREN 12897 : DRAFT 2014	WATER SUPPLY - SPECIFICATION FOR INDIRECTLY HEATED UNVENTED (CLOSED) STORAGE WATER HEATERS
09/30203195 DC : 0	BS EN 15497 - FINGER JOINTED STRUCTURAL TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
08/30169531 DC : DRAFT APR 2008	BS EN 13162 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION
05/30134359 DC : DRAFT MAY 2005	EN 15101-1 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE-FILL CELLULOSE PRODUCTS - PART 1: SPECIFICATION FOR THE PRODUCTS BEFORE INSTALLATION
BS EN 10343:2009	Steels for quenching and tempering for construction purposes. Technical delivery conditions
BS EN 16687:2015	Construction products. Assessment of release of dangerous substances. Terminology
BS EN 60335-2-71:2003	Household and similar electrical appliances. Safety Particular requirements for electrical heating appliances for breeding and rearing animals
BS 8747:2007	Reinforced bitumen membranes (RBMs) for roofing. Guide to selection and specification
DIN EN 15643-4:2012-04	Sustainability of construction works - Assessment of buildings - Part 4: Framework for the assessment of economic performance
12/30259207 DC : DRAFT JUNE 2012	BS EN 13984 - FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER VAPOUR CONTROL LAYERS - DEFINITIONS AND CHARACTERISTICS
BS DD9999(2005) : 2005	CODE OF PRACTICE FOR FIRE SAFETY IN THE DESIGN, CONSTRUCTION AND USE OF BUILDINGS
05/30128013 DC : DRAFT JULY 2005	BS 5655-12 - LIFTS AND SERVICE LIFTS - PART 12: CODE OF PRACTICE FOR THE UNDERTAKING OF MODIFICATIONS TO EXISTING HYDRAULIC LIFTS
BS EN 15285:2008	Agglomerated stone. Modular tiles for flooring and stairs (internal and external)
I.S. EN 60335-2-16:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-16: PARTICULAR REQUIREMENTS FOR FOOD WASTE DISPOSERS (IEC 60335-2-16:2002 (MOD))
09/30196835 DC : 0	BS 8529 - COMPOSITE DOORSETS - DOMESTIC EXTERNAL DOORSETS - SPECIFICATION
04/101694 DC : DRAFT JAN 2004	EN 544 - BITUMEN SHINGLES WITH MINERAL AND/OR SYNTHETIC REINFORCEMENTS - PRODUCT SPECIFICATION AND TEST METHODS
06/30148769 DC : 0	EN 10249-1 - COLD FORMED STEEL SHEET PILING - PART 1: TECHNICAL DELIVERY CONDITIONS
PREN 14342 : DRAFT 2011	WOOD FLOORING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
I.S. EN 16687:2015	CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - TERMINOLOGY
BS EN 15101-1:2013	Thermal insulation products for buildings. In-situ formed loose fill cellulose (LFCI) products Specification for the products before installation
I.S. EN 16497-2:2017	CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 2: BALANCED FLUE APPLICATIONS
S.R. CEN/TR 16410:2012	CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - BARRIERS TO USE - EXTENSION TO CEN/TR 15855 BARRIERS TO TRADE
I.S. EN 60335-2-99:2003/A1:2019	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-99: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC HOODS
PREN 13967 : DRAFT 2011	FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF SHEETS INCLUDING PLASTIC AND RUBBER BASEMENT TANKING SHEET - DEFINITIONS AND CHARACTERISTICS
I.S. EN 60335-2-28:2003/A11:2018	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-28: PARTICULAR REQUIREMENTS FOR SEWING MACHINES
BS EN 15368 : 2008	HYDRAULIC BINDER FOR NON-STRUCTURAL APPLICATIONS - DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA
S.R. CEN TR 16098:2010	CONSTRUCTION PRODUCTS: ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - CONCEPT OF HORIZONTAL TESTING PROCEDURES IN SUPPORT OF REQUIREMENTS UNDER THE CPD
I.S. EN 60335-2-41:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-41: PARTICULAR REQUIREMENTS FOR PUMPS
I.S. EN 15643-5:2017	SUSTAINABILITY OF CONSTRUCTION WORKS - SUSTAINABILITY ASSESSMENT OF BUILDINGS AND CIVIL ENGINEERING WORKS - PART 5: FRAMEWORK ON SPECIFIC PRINCIPLES AND REQUIREMENT FOR CIVIL ENGINEERING WORKS
PREN 15650 : DRAFT 2017	VENTILATION FOR BUILDINGS - FIRE DAMPERS
EN 15102:2007+A1:2011	Decorative wall coverings - Roll and panel form
BS EN 13493:2013	Geosynthetic barriers. Characteristics required for use in the construction of solid waste storage and disposal sites
UNI 11531-1 : 2014	CONSTRUCTION AND MAINTENANCE FOR INFRASTRUCTURE CIVIL BUILDING - CRITERIA FOR MATERIALS USE - PART 1: SOILS AND MIXTURES OF UNBOUND AGGREGATES
BS EN 15382:2013	Geosynthetic barriers. Characteristics required for use in transportation infrastructure
EN 15101-1:2013	Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 1: Specification for the products before installation
EN ISO/TS 15874-7 : 2003	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
EN 545:2010	Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
NF EN 777-4 : 2009	MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY
DIN EN 12201-5:2011-11	Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system
DIN EN 12201-1:2011-11	Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
DIN EN 13859-1:2014-07	FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 1: UNDERLAYS FOR DISCONTINUOUS ROOFING
BS EN 14525:2004	Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, grey iron, steel, PVC-U, PE, fibre-cement
BS EN 12966-1 : 2005	ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 1: PRODUCT STANDARD
BS EN 13492:2013	Geosynthetic barriers. Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
BS EN 40-4:2005	Lighting columns Requirements for reinforced and prestressed concrete lighting columns
BS EN 12094-7:2001	Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for nozzles for CO2 systems
BS EN 12094-2:2003	Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for non-electrical automatic control and delay devices
BS EN 1304:2013	Clay roofing tiles and fittings. Product definitions and specifications
BS EN 13063-3:2007	Chimneys. System chimneys with clay/ceramic flue liners Requirements and test methods for air flue system chimneys
BS EN 517:2006	Prefabricated accessories for roofing. Roof safety hooks
BS EN 15266:2007	Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar
03/318326 DC : DRAFT NOV 2003
BS EN 179:2008	Building hardware. Emergency exit devices operated by a lever handle or push pad, for use on escape routes. Requirements and test methods
BS EN 450-1:2012	Fly ash for concrete Definition, specifications and conformity criteria
BS EN 12604:2000	Industrial, commercial and garage doors and gates. Mechanical aspects. Requirements
BS EN 416-1:2009	Single burner gas-fired overhead radiant tube heaters for non-domestic use Safety
BS EN 12899-4:2007	Fixed, vertical road traffic signs Factory production control
BS EN 1856-1:2009	Chimneys. Requirements for metal chimneys System chimney products
BS EN 681-2:2000	Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Thermoplastic elastomers
BS EN 14889-2:2006	Fibres for concrete Polymer fibres. Definitions, specifications and conformity
EN 197-2:2014	Cement - Part 2: Conformity evaluation
BS EN 13564-1:2002	Anti-flooding devices for buildings Requirements
BS EN 14933:2007	Thermal insulation and light weight fill products for civil engineering applications. Factory made products of expanded polystyrene (EPS). Specification
BS EN 12809 : 2001	RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS
BS EN 295-7:2013	Vitrified clay pipe systems for drains and sewers Requirements for pipes and joints for pipe jacking
BS EN 12899-3:2007	Fixed, vertical road traffic signs Delineator posts and retroreflectors
BS EN 13658-2:2005	Metal lath and beads. Definitions, requirements and test methods External rendering
UNE-EN 60695-8-2:2017	Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods
BS EN 295-1:2013	Vitrified clay pipe systems for drains and sewers Requirements for pipes, fittings and joints
BS EN 1991-1-7 : 2006	EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-7: GENERAL ACTIONS - ACCIDENTAL ACTIONS
BS EN 1338:2003	Concrete paving blocks. Requirements and test methods
BS EN 14390:2007	Fire test. Large-scale room reference test for surface products
BS EN 998-1:2016	Specification for mortar for masonry Rendering and plastering mortar
BS EN 13967 : 2012	FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF SHEETS INCLUDING PLASTIC AND RUBBER BASEMENT TANKING SHEET - DEFINITIONS AND CHARACTERISTICS
BS EN 12094-8:2006	Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for connectors
BS EN 1339:2003	Concrete paving flags. Requirements and test methods
BS EN 681-1:1996	Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Vulcanized rubber
BS EN 10340:2007	Steel castings for structural uses
BS EN 520 : 2004	GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
BS EN 13501-3 : 2005	FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 3: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS ON PRODUCTS AND ELEMENTS USED IN BUILDING SERVICE INSTALLATIONS: FIRE RESISTING DUCTS AND FIRE DAMPERS
BS EN 14992 : 2007	PRECAST CONCRETE PRODUCTS - WALL ELEMENTS
BS EN 312:2010	Particleboards. Specifications
BS EN 14989-1:2007	Chimneys. Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications Vertical air/flue terminals for C6-type appliances
BS EN 12380:2002	Air admittance valves for drainage systems. Requirements, test methods and evaluation of conformity
BS EN 14964:2006	Rigid underlays for discontinuous roofing. Definitions and characteristics
BS EN 14566 : 2008	MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
BS EN 12591:2009	Bitumen and bituminous binders. Specifications for paving grade bitumens
BS EN 12259-4:2000	Fixed firefighting systems. Components for sprinkler and water spray systems Water motor alarms
EN 13263-2:2005+A1:2009	Silica fume for concrete - Part 2: Conformity evaluation
DIN EN 54-17:2006-03	Fire detection and fire alarm systems - Part 17: Short-circuit isolators
EN 14229:2010	Structural timber - Wood poles for overhead lines
EN 13084-7:2012	Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners
EN 1337-8:2007	Structural bearings - Part 8: Guide Bearings and Restraint Bearings
BS 6915(2001) : 2001	DESIGN AND CONSTRUCTION OF FULLY SUPPORTED LEAD SHEET ROOF AND WALL COVERINGS - CODE OF PRACTICE
EN 60335-2-99:2003	Household and similar electrical appliances - Safety - Part 2-99: Particular requirements for commercial electric hoods
EN 1337-7:2004	Structural bearings - Part 7: Spherical and cylindrical PTFE bearings
EN 12259-5:2002	Fixed firefighting systems - Components for sprinkler and water spray systems - Part 5: Water flow detectors
EN 12201-2:2011+A1:2013	Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes
EN 12201-1:2011	Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
EN 60335-2-39:2003/A2:2008	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-39: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC MULTI-PURPOSE COOKING PANS
EN 12352:2006	Traffic control equipment - Warning and safety light devices
EN 13501-3:2005+A1:2009	Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers
EN 13274-7:2008	Respiratory protective devices - Methods of test - Part 7: Determination of particle filter penetration
EN 12201-5:2011	Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system
EN 1057:2006+A1:2010	Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
EN 12899-4:2007	Fixed, vertical road traffic signs - Part 4: Factory production control
DIN EN 15701:2017-02	PLASTICS - THERMOPLASTIC JACKETS FOR INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - REQUIREMENTS AND TEST METHODS
BS 7543:2003	Guide to durability of buildings and building elements, products and components
EN 10088-4:2009	Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
EN 10219-1:2006	Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN 13032-3:2007	Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 3: Presentation of data for emergency lighting of work places
EN 10210-1:2006	Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN 13225:2013	Precast concrete products - Linear structural elements
EN 12899-2:2007	Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB)
EN 12899-1:2007	Fixed, vertical road traffic signs - Part 1: Fixed signs
EN 1051-2:2007	Glass in building - Glass blocks and glass pavers - Part 2: Evaluation of conformity/Product standard
EN 10311:2005	Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids
EN 12966-3:2005	Road vertical signs - Variable message traffic signs - Part 3: Factory production control
EN 12273:2008	Slurry surfacing - Requirements
EN 12004:2007+A1:2012	Adhesives for tiles - Requirements, evaluation of conformity, classification and designation
EN 60335-2-84:2003/A1:2008	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-84: PARTICULAR REQUIREMENTS FOR TOILETS
EN 60695-8-2:2017	Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods
EN 1013:2012+A1:2014	Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods
EN 60335-2-38:2003/A1:2008	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-38: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRIDDLES AND GRIDDLE GRILLS
CEN/TS 16526:2013	Sandwich boards for furniture (SWB-F) - Factory made products - Definition, classification and test methods for determination of performance characteristics
EN 12859:2011	Gypsum blocks - Definitions, requirements and test methods
EN 13263-1:2005+A1:2009	Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria
BS 8529:2010	Composite doorsets. Domestic external doorsets. Specification
EN 12271:2006	Surface dressing - Requirements
EN 13341:2005+A1:2011	Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements and test methods
EN 1090-1:2009+A1:2011	Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
BS 3621(2007) : 2007	THIEF RESISTANT LOCK ASSEMBLY - KEY EGRESS
EN 60335-2-12 : 2003 AMD 1 2008	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES
EN 12951:2004	Prefabricated accessories for roofing - Permanently fixed roof ladders - Product specification and test methods
NF EN ISO 15876-2 : 2017	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTYLENE (PB) - PART 2: PIPES
BS 9999:2008	Code of practice for fire safety in the design, management and use of buildings
EN 1319:2009	Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW
EN 13055-2:2004	Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
EN 1337-6:2004	Structural bearings - Part 6: Rocker bearings
EN 1337-5:2005	Structural bearings - Part 5: Pot bearings
EN 14250:2010	Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
EN 12966-1:2005+A1:2009	Road vertical signs - Variable message traffic signs - Part 1: Product standard
EN 12094-2:2003	Fixed firefighting systems - Components for gas extinguishing systems - Part 2: Requirements and test methods for non-electrical automatic control and delay devices
BS 8621(2007) : 2007	THIEF RESISTANT LOCK ASSEMBLY - KEYLESS EGRESS
EN 1168:2005+A3:2011	Precast concrete products - Hollow core slabs
BS 3621:2004	Thief resistant lock assembly. Key egress
EN 12094-8:2006	Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors
BS 4873:2016	Aluminium alloy windows and doorsets. Specification
EN 12101-7:2011	Smoke and heat control systems - Part 7: Smoke duct sections
EN 12899-3:2007	Fixed, vertical road traffic signs - Part 3: Delineator posts and retroreflectors
EN 1304:2013	Clay roofing tiles and fittings - Product definitions and specifications
EN 12094-6:2006	Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices
EN 40-7:2002	Lighting columns - Part 7: Requirements for fibre reinforced polymer composite lighting columns
BS EN 1457:1999	Chimneys. Clay/ceramic flue liners. Requirements and test methods
BS 6203:2003	Guide to fire characteristics and fire performance of expanded polystyrene materials (EPS and XPS) used in building applications
NF EN 10025-6 : 2005 + A1 2009	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION
NF EN 13353 : 2009 + A1 2011	SOLID WOOD PANELS (SWP) - REQUIREMENTS
BS EN 15821:2010	Multi-firing sauna stoves fired by natural wood logs. Requirements and test methods
98/109040 DC : DRAFT NOV 1998	PREN 13362 - REQUIRED CHARACTERISTICS FOR GEOMEMBRANES AND GEOMEMBRANE-RELATED PRODUCTS USED IN THE CONSTRUCTION OF CANALS
BS EN 15283-1 : 2008	GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT
08/30169546 DC : DRAFT APR 2008	BS EN 13167 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION
05/30131069 DC : DRAFT MAR 2005	EN 598:2005 - DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS
S.R. 82:2017	SLATING AND TILING - CODE OF PRACTICE
12/30258581 DC : 0	BS 5908-2 - FIRE AND EXPLOSION PRECAUTIONS AT PREMISES HANDLING FLAMMABLE GASES, LIQUIDS AND DUSTS - PART 2: GUIDE TO APPLICABLE STANDARDS AND REGULATIONS
UNI EN 15643-4 : 2012	SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 4: FRAMEWORK FOR THE ASSESSMENT OF ECONOMIC PERFORMANCE
BS EN 1090-1 : 2009	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS
BS EN 12101-7:2011	Smoke and heat control systems Smoke duct sections
BS EN 15743 : 2010	SUPERSULFATED CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
NF EN 15368 : 2009 + A1 2010	HYDRAULIC BINDER FOR NON-STRUCTURAL APPLICATIONS - DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA
00/101411 DC : DRAFT FEB 2000	BS EN 13815 - FIBROUS GYPSUM PLASTER PRODUCTS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
04/30104415 DC : DRAFT AUG 2004	EN 54-20 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 20: ASPIRATING SMOKE DETECTORS
01/107225 DC : DRAFT OCT 2001	PREN 14250 - TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED TRUSSES USING PUNCHED METAL PLATE FASTENERS
12/30254418 DC : DRAFT JAN 2012	BS EN 1469 - NATURAL STONE PRODUCTS - SLABS FOR CLADDING - REQUIREMENTS
PREN 1935 : DRAFT 2012	BUILDING HARDWARE - SINGLE-AXIS HINGES - REQUIREMENTS AND TEST METHODS
PREN 14064-1 : DRAFT 2016	THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE-FILL MINERAL WOOL (MW) PRODUCTS - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION
BS EN 13565-1 : 2003	FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
01/105394 DC : DRAFT JULY 2001	PREN 13024-2 - THERMALLY TOUGHENED BOROSILICATE SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY
BS EN 16497-2:2017	Chimneys. Concrete System Chimneys Balanced flue applications
PREN 13255 : DRAFT 2011	GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS
13/30273039 DC : 0	BS EN 13859-2 - FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 2: UNDERLAYS FOR WALLS
NF EN 15285 : 2008	AGGLOMERATED STONE - MODULAR TILES FOR FLOORING AND STAIRS (INTERNAL AND EXTERNAL)
BS EN 15600-1:2010	Thermal insulation products for building equipment and industrial installations. In-situ thermal insulation formed from exfoliated vermiculite (EV) products Specification for bonded and loose-fill products before installation
PD 476-3:2012	Classification rules for the end-use application of test results arising from BS 476-3, \'Classification and method of test for external fire exposure of roofs\'
DIN EN 15288-1:2010-12	SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN
13/30275356 DC : 0	BS EN 12966 - ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS
03/102517 DC : 0	BS EN 13633 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED PANIC EXIT SYSTEMS - REQUIREMENTS AND TEST METHODS
10/30216654 DC : 0	BS EN 12842 - DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS
12/30254896 DC : 0	BS EN 197-2 - CEMENT - PART 2: CONFORMITY EVALUATION
BS EN 15650:2010	Ventilation for buildings. Fire dampers
NF EN 15824 : 2017	SPECIFICATIONS FOR EXTERNAL RENDERS AND INTERNAL PLASTERS BASED ON ORGANIC BINDERS
11/30248435 DC : 0	BS EN 14891 - LIQUID-APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION
BS 8529:2017	Composite doorsets. Domestic external doorsets, Specification
NF EN 14989-2 : 2008	CHIMNEYS - REQUIREMENTS AND TEST METHODS FOR METAL CHIMNEYS AND MATERIAL INDEPENDENT AIR SUPPLY DUCTS FOR ROOM SEALED HEATING APPLICATIONS - PART 2: FLUE AND AIR SUPPLY DUCTS FOR INDIVIDUAL ROOM SEALED APPLIANCES
PD 6682-3:2003	Aggregates Aggregates for mortar. Guidance on the use of BS EN 13139
BS EN 15286:2013	Agglomerated stone. Slabs and tiles for wall finishes (internal and external)
PD CEN/TR 15858:2009	Construction products. Assessment of the release of regulated dangerous substances from construction products based on the WT, WFT/FT procedures
PREN 13859-1 : DRAFT 2013	FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 1: UNDERLAYS FOR DISCONTINUOUS ROOFING
12/30254421 DC : DRAFT JAN 2012	BS EN 12057 - NATURAL STONE PRODUCTS - MODULAR TILES - REQUIREMENTS
06/30158054 DC : DRAFT NOV 2006	BS 3621 AMD 1 - THIEF RESISTANT LOCK ASSEMBLY - KEY EGRESS
16/30339191 DC : 0	BS 8529 - COMPOSITE DOORSETS - DOMESTIC EXTERNAL DOORSETS - SPECIFICATION
99/100964 DC : DRAFT FEB 1999	PREN 13492 - REQUIRED CHARACTERISTICS FOR GEOMEMBRANES AND GEOMEMBRANE-RELATED PRODUCTS USED IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES OR TRANSFER STATIONS
BS EN 1999-1-2:2007	Eurocode 9. Design of aluminium structures Structural fire design
03/115371 DC : DRAFT SEP 2003	EN 14783 - FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOF COVERINGS AND WALL FINISHES
BIP 2081 : 2012	A GUIDE TO EMERGENCY LIGHTING
PREN 490 : DRAFT 2011	CONCRETE ROOFING TILES AND FITTINGS FOR ROOF COVERING AND WALL CLADDING - PRODUCT SPECIFICATIONS
PREN 12150-2 : DRAFT 2017	GLASS IN BUILDING - THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 2: PRODUCT STANDARD
BS EN 13274-7:2008	Respiratory protective devices. Methods of test Determination of particle filter penetration
PREN 14783 : DRAFT 2012	FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
NF EN 15715 : 2010	THERMAL INSULATION PRODUCTS - INSTRUCTIONS FOR MOUNTING AND FIXING FOR REACTION TO FIRE TESTING - FACTORY MADE PRODUCTS
EN 15643-4:2012	Sustainability of construction works - Assessment of buildings - Part 4: Framework for the assessment of economic performance
PREN 14908-6 : DRAFT 2014	OPEN DATA COMMUNICATION IN BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT - CONTROL NETWORK PROTOCOL - PART 6: APPLICATION ELEMENTS
I.S. EN 60695-8-2:2017	FIRE HAZARD TESTING - PART 8-2: HEAT RELEASE - SUMMARY AND RELEVANCE OF TEST METHODS
I.S. EN 60335-2-47:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-47: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BOILING PANS (IEC 60335-2-47:2002 (EQV))
BS EN 60335-2-88:2002	Specification for safety of household and similar electrical appliances. Particular requirements Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems
I.S. EN 60335-2-82:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-82: PARTICULAR REQUIREMENTS FOR AMUSEMENT MACHINES AND PERSONAL SERVICE MACHINES
I.S. EN 60335-2-81:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR FOOT WARMERS AND HEATING MATS (IEC 60335 -2-81:2002 (EQV))
BS EN 14592 : 2008	TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
I.S. EN 60335-2-74:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-74: PARTICULAR REQUIREMENTS FOR PORTABLE IMMERSION HEATERS
BS EN 15037-2 : 2009	PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 2: CONCRETE BLOCKS
BS EN 15814 : 2011	POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS
I.S. EN 15288-1:2008	SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN
BS EN 16361 : 2013	POWER OPERATED PEDESTRIAN DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PEDESTRIAN DOORSETS, OTHER THAN SWING TYPE, INITIALLY DESIGNED FOR INSTALLATION WITH POWER OPERATION
I.S. EN 60335-2-9:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-9: PARTICULAR REQUIREMENTS FOR GRILLS, TOASTERS AND SIMILAR PORTABLE COOKING APPLIANCES (IEC 60335-2-9:2002 (MOD))
BS EN 54-7:2001	Fire detection and fire alarm systems Smoke detectors. Point detectors using scattered light, transmitted light or ionization
CEI CLC/TR 50456 : 2008	ALARM SYSTEMS - GUIDELINES TO ACHIEVING COMPLIANCE WITH EC DIRECTIVES FOR EQUIPMENT OF ALARM SYSTEMS
EN 60335-2-74:2003/A2:2009	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-74: PARTICULAR REQUIREMENTS FOR PORTABLE IMMERSION HEATERS
BS EN 15129:2009	Anti-seismic devices
BS EN 14908-6:2014	Open Data Communication in Building Automation, Controls and Building Management. Control Network Protocol Application elements
I.S. EN 15814:2011	POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS
FD CEN/TR 15677 : 2008 FD	FLY ASH OBTAINED FROM CO-COMBUSTION - A REPORT ON THE SITUATION IN EUROPE
12/30268937 DC : 0	BS EN 16491 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE COMPOSITE PRODUCTS - SPECIFICATION
UNE-EN 50399:2012	Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test - Test apparatus, procedures, results
PREN 14933 : DRAFT 2004	LIGHT WEIGHT FILL AND INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION
DIN EN 54-7:2015-07 (Draft)	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 7: SMOKE DETECTORS - POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION
UNE-EN 15288-1:2009	Swimming pools - Part 1: Safety requirements for design
NF EN 12273 : 2008	SLURRY SURFACING - REQUIREMENTS
PREN 50575 : DRAFT 2012	POWER, CONTROL AND COMMUNICATION CABLES - CABLES FOR GENERAL APPLICATIONS IN CONSTRUCTION WORKS SUBJECT TO REACTION TO FIRE REQUIREMENTS
ISO/TS 15875-7:2003	Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 7: Guidance for the assessment of conformity
BS EN 60335-2-12 : 2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES
EN 13565-1:2003+A1:2007	Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components
EN 485-2:2016	Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties
I.S. EN 60335-2-48:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-48: PARTICULAR REQUIREMENTS FOR COMMERCIAL GRILLERS AND TOASTERS (IEC 60335-2-48:2002 (EQV))
EN 60335-2-9:2003/A13:2010/AC:2012	Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances
NF EN 777-2 : 2009	MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY
NF EN 777-3 : 2009	MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 3: SYSTEM F - SAFETY
DIN EN 12842:2012-11	Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods
DIN EN 1858:2016-08 (Draft)	CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS
CEI EN 60695-6-2 : 2013	FIRE HAZARD TESTING - PART 6-2: SMOKE OBSCURATION - SUMMARY AND RELEVANCE OF TEST METHODS
DIN EN 13970:2005-02	Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics
DIN EN 598:2009-10	Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods (includes Amendment A1:2009)
DIN EN 15266:2007-08	Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar
DIN EN 14390:2007-04	Fire test - Large-scale room reference test for surface products
UNE-EN 14080:2013	Timber structures - Glued laminated timber and glued solid timber - Requirements
BS EN 544:2011	Bitumen shingles with mineral and/or synthetic reinforcements. Product specification and test methods
BS EN 14991:2007	Precast concrete products. Foundation elements
BS EN 10242:1995	Threaded pipe fittings in malleable cast iron
BS EN 598 : 2007	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS
BS EN 13055-2:2004	Lightweight aggregates Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
BS EN 295-4:2013	Vitrified clay pipe systems for drains and sewers Requirements for adaptors, connectors and flexible couplings
BS EN 14317-1:2004	Thermal insulation products for buildings. In-situ thermal insulation formed from exfoliated vermiculite (EV) products Specification for bonded and loose-fill products before installation
UNE-EN 545:2011	Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
BS EN 13241-1 : 2003	INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - PRODUCT STANDARD - PART 1: PRODUCTS WITHOUT FIRE RESISTANCE OR SMOKE CONTROL CHARACTERISTICS
UNE-EN 12201-5:2012	Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system
BS EN 13032-3:2007	Measurement and presentation of photometric data of lamps and luminaires Presentation of data for emergency lighting of work places
UNE-EN 14909:2013	Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics
BS EN 13084-5:2005	Free-standing chimneys Material for brick liners. Product specifications
BS EN 13748-1 : 2004	TERRAZZO TILES - PART 1: TERRAZZO TILES FOR INTERNAL US
BS EN 13502:2002	Chimneys. Requirements and test methods for clay/ceramic flue terminals
BS EN 40-7:2002	Lighting columns Requirements for fibre reinforced polymer composite lighting columns
BS EN 1337-5:2005	Structural bearings Pot bearings
BS EN 13859-2:2014	Flexible sheets for waterproofing. Definitions and characteristics of underlays Underlays for walls
I.S. EN 13859-1:2014	FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 1: UNDERLAYS FOR DISCONTINUOUS ROOFING
I.S. EN 13984:2013	FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER VAPOUR CONTROL LAYERS - DEFINITIONS AND CHARACTERISTICS
I.S. EN 1858:2008	CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS
I.S. EN 598:2007	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS
I.S. EN 12842:2012	DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS
I.S. EN 969:2009	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS
I.S. EN 12201-5:2011	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM
I.S. EN 12201-2:2011	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 2: PIPES
I.S. EN 12201-3:2011	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 3: FITTINGS
I.S. EN 14909:2012	FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF COURSES - DEFINITIONS AND CHARACTERISTICS
I.S. EN 13707:2013	FLEXIBLE SHEETS FOR WATERPROOFING - REINFORCED BITUMEN SHEETS FOR ROOF WATERPROOFING - DEFINITIONS AND CHARACTERISTICS
DIN EN 1857:2010-08	Chimneys - Components - Concrete flue liners
DIN EN 14188-2:2005-03	JOINT FILLERS AND SEALANTS - PART 2: SPECIFICATIONS FOR COLD APPLIED SEALANTS
DIN EN 12094-8:2006-07	Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors
I.S. EN 312:2010	PARTICLEBOARDS - SPECIFICATIONS
I.S. EN 12201-1:2011	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL
I.S. EN 13859-2:2014	FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 2: UNDERLAYS FOR WALLS
I.S. EN 545:2010	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS
DIN EN 12352:2006-07	Traffic control equipment - Warning and safety light devices
I.S. EN 12352:2006	TRAFFIC CONTROL EQUIPMENT - WARNING AND SAFETY LIGHT DEVICES
DIN EN 13032-3:2007-12	Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 3: Presentation of data for emergency lighting of work places
I.S. EN 10255:2004	NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS
I.S. EN 1857:2010	CHIMNEYS - COMPONENTS - CONCRETE FLUE LINERS
I.S. EN 12094-8:2006	FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 8: REQUIREMENTS AND TEST METHODS FOR CONNECTORS
UNI EN 13970 : 2007	FLEXIBLE SHEETS FOR WATERPROOFING - BITUMEN WATER VAPOUR CONTROL LAYERS - DEFINITIONS AND CHARACTERISTICS
UNI EN 13984 : 2013	FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER VAPOUR CONTROL LAYERS - DEFINITIONS AND CHARACTERISTICS
BS 5502-23:2004	Buildings and structures for agriculture Fire precautions. Code of practice
BS 6739:2009	Code of practice for instrumentation in process control systems: installation design and practice
BS 5655-11:2005	Lifts and service lifts Code of practice for the undertaking of modifications to existing electric lifts
PD 6682-6:2003	Aggregates Aggregates for unbound and hydraulically bound materials for use in civil engineering works and road construction. Guidance on the use of BS EN 13242
BS 6510:2010	Steel-framed windows and glazed doors. Specification
BS PD6682-2(2009) : 2009	AGGREGATES - PART 2: AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS - GUIDANCE ON THE USE OF BS EN 13043
PD 7974-3:2011	Application of fire safety engineering principles to the design of buildings Structural response and fire spread beyond the enclosure of origin
BS PD6682-1(2009) : 2009	AGGREGATES - PART 1: AGGREGATES FOR CONCRETE - GUIDANCE ON THE USE OF BS EN 12620
BS 6510:2005	Steel-framed windows and glazed doors
BS 476-10:2009	Fire tests on building materials and structures Guide to the principles, selection, role and application of fire testing and their outputs
BS 4933:2010	Specification for ISO metric black cup and countersunk head bolts and screws with hexagon nuts
BS 644:2012	Timber windows and doorsets. Fully finished factory-assembled windows and doorsets of various types. Specification
BS 7412:2007	Specification for windows and doorsets made from unplasticized polyvinyl chloride (PVC-U) extruded hollow profiles
BS 644:2009	Timber windows. Fully finished factory-assembled windows of various types. Specification
BS 5655-12:2005	Lifts and service lifts Code of practice for the undertaking of modifications to existing hydraulic lifts
BS 8103-3:2009	Structural design of low-rise buildings Code of practice for timber floors and roofs for housing
PD 6608:1998	Guide to achieving compliance with EC directives for alarm systems
BS 434-2:2006	Bitumen road emulsions Code of practice for the use of cationic bitumen emulsions on roads and other paved areas
BS 1245:2012	Pedestrian doorsets and door frames made from steel sheet. Specification
NF EN 1463-1 : 2009	ROAD MARKING MATERIALS - RETROREFLECTING ROAD STUDS - PART 1: INITIAL PERFORMANCE REQUIREMENTS
EN 1279-5:2005+A2:2010	Glass in building - Insulating glass units - Part 5: Evaluation of conformity
I.S. EN 16485:2014	ROUND AND SAWN TIMBER - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR WOOD AND WOOD-BASED PRODUCTS FOR USE IN CONSTRUCTION
BS EN 14055 : 2010	WC AND URINAL FLUSHING CISTERNS
DIN EN 14967:2006-08	Flexible sheets for waterproofing - Bitumen damp proof courses - Definitions and characteristics
12/30256417 DC : 0	BS EN 54-31 - FIRE DETECTION AND FIRE ALARM SYSTEM - PART 31: MULTI-SENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF SMOKE, CARBON MONOXIDE AND OPTIONALLY HEAT SENSORS
I.S. EN ISO/TS 15876-7:2004	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTYLENE (PB) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
07/30170129 DC : 0	BS EN 1856-1 - CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 1: SYSTEM CHIMNEY PRODUCTS
PREN 12842 : DRAFT 2010	DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS
DIN EN 54-23:2010-06	Fire detection and fire alarm systems - Part 23: Fire alarm devices - Visual alarm devices
BS EN 50290-4-2:2014	Communication cables General considerations for the use of cables. Guide to use
BS EN 15643-4:2012	Sustainability of construction works. Assessment of buildings Framework for the assessment of economic performance
PD CEN/TR 15438:2007	Plastics piping systems. Guidance for coding of products and their intended uses
PD 6682-2:2003	Aggregates Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas. Guidance on the use of BS EN 13043
I.S. EN 12966-3:2005	ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 3: FACTORY PRODUCTION CONTROL
BS EN 15599-1:2010	Thermal insulation products for building equipment and industrial installations. In-situ thermal insulation formed from expanded perlite (EP) products Specification for bonded and loose-fill products before installation
11/30239935 DC : 0	BS EN 13255 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS
08/30181473 DC : DRAFT JULY 2008	BS EN 545 - DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS
11/30239938 DC : 0	BS EN 13256 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF TUNNELS AND UNDERGROUND STRUCTURES
97/102971 DC : DRAFT APR 1997	PREN 12843 - PRECAST CONCRETE MASTS AND POSTS
12/30264370 DC : 0	BS EN 14783 - FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
00/108536 DC : 0	PREN 14064-1 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE-FILL MINERAL WOOL PRODUCTS - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION
BS EN 15037-1:2008	Precast concrete products. Beam-and-block floor systems Beams
UNE-EN 16687:2016	Construction products - Assessment of release of dangerous substances - Terminology
NF EN ISO 13943 : 2018	FIRE SAFETY - VOCABULARY
BS 5908-2:2012	Fire and explosion precautions at premises handling flammable gases, liquids and dusts Guide to applicable standards and regulations
PREN 14782 : DRAFT 2015	SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
UNI EN 14695 : 2010	FLEXIBLE SHEETS FOR WATERPROOFING - REINFORCED BITUMEN SHEETS FOR WATERPROOFING OF CONCRETE BRIDGE DECKS AND OTHER TRAFFICKED AREAS OF CONCRETE - DEFINITIONS AND CHARACTERISTICS
02/710115 DC : DRAFT AUG 2002	PREN 14525 - DUCTILE IRON WIDE TOLERANCE COUPLINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U PE, FIBRE-CEMENT
NF EN 54-24 : 2008	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: COMPONENTS OF VOICE ALARM SYSTEMS - LOUDSPEAKERS
11/30239929 DC : 0	BS EN 13253 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN EROSION CONTROL WORKS (COASTAL PROTECTION, BANK REVETMENTS)
16/30333945 DC : 0	BS EN 15643-5 - SUSTAINABILITY OF CONSTRUCTION WORKS - SUSTAINABILITY ASSESSMENT OF BUILDINGS AND CIVIL ENGINEERING WORKS - PART 5: FRAMEWORK FOR THE ASSESSMENT OF SUSTAINABILITY PERFORMANCE OF CIVIL ENGINEERING WORKS
BS EN 1013 : 2012	LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
13/30273036 DC : 0	BS EN 13859-1 - FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 1: UNDERLAYS FOR DISCONTINUOUS ROOFING
99/712245 DC : DRAFT AUG 1999	PREN 10080-1 - STEEL FOR CONCRETE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - PART 1: GENERAL REQUIREMENTS
PD CEN/TR 16098:2010	Construction products. Assessment of release of dangerous substances. Concept of horizontal testing procedures in support of requirements under the CPD
TR 103 056 : 1.1.1	ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); SYSTEM REFERENCE DOCUMENT; SHORT RANGE DEVICES (SRD); TECHNICAL CHARACTERISTICS FOR SRD EQUIPMENT FOR SOCIAL ALARM AND ALARM APPLICATIONS
PD 6703:2009	Structural bearings. Guidance on the use of structural bearings
BS EN 60335-2-99:2003	Specification for safety of household and similar electrical appliances Particular requirements for commercial electric hoods
DIN EN 15701:2015-02 (Draft)	PLASTICS - THERMOPLASTIC JACKETS FOR INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - REQUIREMENTS AND TEST METHODS
99/107820 DC : DRAFT OCT 1999	BS EN 13658-2 - METAL LATH AND BEADS - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: EXTERNAL RENDERING
BS EN 1337-8:2007	Structural bearings Guide bearings and restraint bearings
09/30207865 DC : 0	BS EN 13859-1 - FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 1: UNDERLAYS FOR DISCONTINUOUS ROOFING
PD 6682-7:2003	Aggregates Armourstone. Guidance on the use of BS EN 13383
04/30110333 DC : DRAFT MAR 2004	EN 14889-2 - FIBRES FOR CONCRETE - PART 2: POLYMER FIBRES - DEFINITION, SPECIFICATIONS AND CONFORMITY
12/30218393 DC : 0	BS 644 - TIMBER WINDOWS AND DOORSETS - FULLY FINISHED FACTORY-ASSEMBLED WINDOWS AND DOORSETS OF VARIOUS TYPES - SPECIFICATION
BS EN 12101-8:2011	Smoke and heat control systems Smoke control dampers
PD 6682-5:2005	Aggregates Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications. Guidance on the use of BS EN 13055-2
12/30258217 DC : 0	BS EN 13707 - FLEXIBLE SHEETS FOR WATERPROOFING - REINFORCED BITUMEN SHEETS FOR ROOF WATERPROOFING - DEFINITIONS AND CHARACTERISTICS
PD 6682-9:2003	Aggregates Guidance on the use of European test method standards
04/30113509 DC : DRAFT MAY 2004	BS EN 14934 - THERMAL INSULATION OF ROAD AND RAILWAYS AND EMBANKMENT FILLING - FACTORY MADE PRODUCTS OF EXTRUDED POLYSTYRENE FOAM (XPS) - SPECIFICATION
PD ISO/TR 15686-11:2014	Buildings and constructed assets. Service life planning Terminology
BS EN 54-25:2008	Fire detection and fire alarm systems Components using radio links
PREN 12966 : DRAFT 2013	ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS
04/19975313 DC : 0	BS EN 12566-4 - SMALL WASTEWATER SYSTEMS UP TO 50 PT - PART 4: SEPTIC TANKS ASSEMBLED IN SITU FROM PREFABRICATED KITS
BS EN 15498:2008	Precast concrete products. Wood-chip concrete shuttering blocks. Product properties and performance
03/314375 DC : DRAFT DEC 2003	BS EN 14844 - PRECAST CONCRETE BOX CULVERTS
PD 6682-1:2003	Aggregates Aggregates for concrete. Guidance on the use of BS EN 12620
BS EN 60335-2-10 : 2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-10: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES
BS EN 15389:2008	Industrial valves. Performance characteristics of thermoplastic valves when used as construction products
NFP 22 501-1 : 98 XP	EXECUTION OF STEEL STRUCTURES - PART 1: GENERAL RULES AND RULES FOR BUILDINGS
I.S. EN 15701:2016	PLASTICS - THERMOPLASTIC JACKETS FOR INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - REQUIREMENTS AND TEST METHODS
ISO/TS 21003-7:2008	Multilayer piping systems for hot and cold water installations inside buildings Part 7: Guidance for the assessment of conformity
CLC/TR 50456:2008	Alarm systems - Guidelines to achieving compliance with EC directives for equipment of alarm systems
I.S. EN 60335-2-59:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-59: PARTICULAR REQUIREMENTS FOR INSECT KILLERS
BS EN 485-2:2013	Aluminium and aluminium alloys. Sheet, strip and plate Mechanical properties
BS EN 15037-3 : 2009	PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS
BS EN 50399:2011	Common test methods for cables under fire conditions. Heat release and smoke production measurement on cables during flame spread test. Test apparatus, procedures, results
PD CEN/TS 16459:2013	External fire exposure of roofs and roof coverings. Extended application of test results from CEN/TS 1187
I.S. EN 60335-2-39:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-39: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC MULTI-PURPOSE COOKING PANS
S.R. CEN/TS 16526:2013	SANDWICH BOARDS FOR FURNITURE (SWB-F) - FACTORY MADE PRODUCTS - DEFINITION, CLASSIFICATION AND TEST METHODS FOR DETERMINATION OF PERFORMANCE CHARACTERISTICS
I.S. EN 60335-2-26:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-26: PARTICULAR REQUIREMENTS FOR CLOCKS
NF EN 1279-5 : 2005 + A2 2010	GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY
NF EN 13476-3 : 2007 + A1 2009	PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INSIDE AND PROFILED OUTSIDE SURFACE, TYPE B
TR 102 649-2 : 1.3.1	ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); TECHNICAL CHARACTERISTICS OF SHORT RANGE DEVICES (SRD) AND RFID IN THE UHF BAND; SYSTEM REFERENCE DOCUMENT FOR RADIO FREQUENCY IDENTIFICATION (RFID) AND SRD EQUIPMENT; PART 2: ADDITIONAL SPECTRUM REQUIREMENTS FOR UHF RFID, NON-SPECIFIC SRDS AND SPECIFIC SRDS
I.S. EN 60695-6-2:2011	FIRE HAZARD TESTING - PART 6-2: SMOKE OBSCURATION - SUMMARY AND RELEVANCE OF TEST METHODS (IEC 60695-6-2:2011)
CEN/TR 17005:2016	Sustainability of construction works - Additional environmental impact categories and indicators - Background information and possibilities - Evaluation of the possibility of adding environmental impact categories and related indicators and calculation methods for the assessment of the environmental performance of buildings
EN 60335-2-48 : 2003 AMD 11 2012	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-48: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRILLERS AND TOASTERS (IEC 60335-2-48:2002)
ISO/TR 15686-11:2014	Buildings and constructed assets — Service life planning — Part 11: Terminology
EN ISO/TS 15876-7 : 2003	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTYLENE (PB) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
BS EN 13501-1 : 2007	FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS
CEN ISO/TS 15875-7:2003	Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 7: Guidance for the assessment of conformity (ISO/TS 15875-7:2003)
I.S. EN ISO/TS 15874-7:2004	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS POLYPROPYLENE (PP) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
I.S. EN 60335-2-91:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-91: PARTICULAR REQUIREMENTS FOR WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS
EN 60335-2-16:2003/A2:2012	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-16: PARTICULAR REQUIREMENTS FOR FOOD WASTE DISPOSERS (IEC 60335-2-16:2002/A2:2011)
I.S. EN 60335-2-80:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-80: PARTICULAR REQUIREMENTS FOR FANS
DIN EN 12352:2015-02 (Draft)	Traffic control equipment - Warning and safety light devices; German version prEN 12352:2014
DIN EN 14188-3:2006-04	Joint fillers and sealants - Part 3: Specifications for preformed joint seals
NF EN 777-1 : 2009	MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY
DIN EN 1433:2005-09	DRAINAGE CHANNELS FOR VEHICULAR AND PEDESTRIAN AREAS - CLASSIFICATION, DESIGN AND TESTING REQUIREMENTS, MARKING AND EVALUATION OF CONFORMITY
DIN EN 13984:2013-05	FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER VAPOUR CONTROL LAYERS - DEFINITIONS AND CHARACTERISTICS
BS EN 681-4:2000	Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Cast polyurethane sealing elements
BS EN 14188-1:2004	Joint fillers and sealants Specifications for hot applied sealants
BS EN 1125:2008	Building hardware. Panic exit devices operated by a horizontal bar, for use on escape routes. Requirements and test methods
BS EN 15050 : 2007	PRECAST CONCRETE PRODUCTS - BRIDGE ELEMENTS
BS EN 14647:2005	Calcium aluminate cement. Composition, specifications and conformity criteria
BS EN 545:2010	Ductile iron pipes, fittings, accessories and their joints for water pipelines. Requirements and test methods
BS EN 12201-1:2011	Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) General
BS EN 13969:2004	Flexible sheets for waterproofing. Bitumen damp proof sheets including bitumen basement tanking sheets. Definitions and characteristics
BS EN 12899-2:2007	Fixed, vertical road traffic signs Transilluminated traffic bollards (TTB)
BS EN 13263-2 : 2005	SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION
BS EN 1154:1997	Building hardware. Controlled door closing devices. Requirements and test methods
BS EN 969:2009	Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods
BS EN 14016-1:2004	Binders for magnesite screeds. Caustic magnesia and magnesium chloride Definitions, requirements
BS EN 12201-2 : 2011	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 2: PIPES
BS EN 197-2:2014	Cement Conformity evaluation
BS EN 10224:2002	Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids. Technical delivery conditions
BS EN 523:2003	Steel strip sheaths for prestressing tendons. Terminology, requirements, quality control
BS EN 12271:2006	Surface dressing. Requirements
UNE-EN 12842:2013	Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods
BS EN 197-1:2011	Cement Composition, specifications and conformity criteria for common cements
BS EN 1504-3:2005	Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Structural and non-structural repair
BS EN 1020:2009	Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products
UNE-EN 13707:2014	Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics
BS EN 14843:2007	Precast concrete products. Stairs
BS EN 40-6:2002	Lighting columns Requirements for aluminium lighting columns
BS EN 295-10:2005	Vitrified clay pipes and fittings and pipe joints for drains and sewers Performance requirements
I.S. EN 14080:2013	TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS
EN 60335-2-28:2003/A1:2008	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-28: PARTICULAR REQUIREMENTS FOR SEWING MACHINES
DIN EN 1858:2011-09	Chimneys - Components - Concrete flue blocks
EN 14064-1:2010	Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1: Specification for the loose-fill products before installation
EN 14964:2006	Rigid underlays for discontinuous roofing - Definitions and characteristics
EN 13986:2004	Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
EN 13501-1:2007+A1:2009	Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
EN 15288-1:2008+A1:2010	Swimming pools - Part 1: Safety requirements for design
EN 15283-1:2008+A1:2009	Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement
EN 13964:2014	Suspended ceilings - Requirements and test methods
EN 544:2011	Bitumen shingles with mineral and/or synthetic reinforcements - Product specification and test methods
UNI EN 312 : 2010	PARTICLEBOARDS - SPECIFICATIONS
UNI EN 13859-2 : 2014	FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 2: UNDERLAYS FOR WALLS
UNI EN 1857 : 2010	CHIMNEYS - COMPONENTS - CONCRETE FLUE LINERS
UNI EN 12899-4 : 2008	FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 4: FACTORY PRODUCTION CONTROL
UNI EN 14525 : 2005	DUCTILE IRON WIDE TOLERANCE COUPLINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U PE, FIBRE-CEMENT
UNI EN 969 : 2009	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS
UNI EN 12201-1 : 2012	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL
UNI EN 12842 : 2012	DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS
UNI EN 12201-2 : 2013	Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes
EN 1125:2008	Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods
UNI EN 13859-1 : 2014	FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 1: UNDERLAYS FOR DISCONTINUOUS ROOFING
UNI EN 12201-3 : 2013	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 3: FITTINGS
UNI EN 14080 : 2013	TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS
UNI EN 1504-10 : 2005	PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS - REQUIREMENTS - QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS
UNI CEN/TS 16526 : 2014	SANDWICH BOARDS FOR FURNITURE (SWB-F) - FACTORY MADE PRODUCTS - DEFINITION, CLASSIFICATION AND TEST METHODS FOR DETERMINATION OF PERFORMANCE CHARACTERISTICS
I.S. EN 14525:2005	DUCTILE IRON WIDE TOLERANCE COUPLINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U PE, FIBRE-CEMENT
UNI EN 12352 : 2006	TRAFFIC CONTROL EQUIPMENT - WARNING AND SAFETY LIGHT DEVICES
UNI EN 545 : 2010	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS
EN 15258:2008	Precast concrete products - Retaining wall elements
UNI EN 13967 : 2012	FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF SHEETS INCLUDING PLASTIC AND RUBBER BASEMENT TANKING SHEET - DEFINITIONS AND CHARACTERISTICS
UNI EN 12201-5 : 2012	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM
UNI EN 1858 : 2012	CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS
UNI EN 598 : 2009	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS
UNI EN 13707 : 2013	FLEXIBLE SHEETS FOR WATERPROOFING - REINFORCED BITUMEN SHEETS FOR ROOF WATERPROOFING - DEFINITIONS AND CHARACTERISTICS
PD 6686:2006	Guidance on directives, regulations and standards related to prevention of fire and explosion in the process industries
04/30111056 DC : DRAFT MARCH 2004	EN 1806 - CHIMNEYS - CLAY/CERAMIC FLUE BLOCKS FOR SINGLE WALL CHIMNEYS - REQUIREMENTS AND TEST METHODS
PD 6682-4:2003	Aggregates Lightweight aggregates for concrete, mortar and grout. Guidance on the use of BS EN 13055-1
98/106350 DC : DRAFT JULY 1998	PREN 13279-1 - GYPSUM AND GYPSUM BASED BUILDING PLASTER - PART 1: DEFINITIONS AND REQUIREMENTS
00/100745 DC : DRAFT MAR 2000	PREN 13859-2 - FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 2: UNDERLAYS FOR WALLS
11/30239926 DC : 0	BS EN 13252 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN DRAINAGE SYSTEMS
11/30142900 DC : 0	BS 1245 - PEDESTRIAN DOORSETS AND DOOR FRAMES MADE FROM STEEL SHEET - SPECIFICATION
BS EN 14989-2:2007	Chimneys. Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications Flue and air supply ducts for room sealed appliances
PREN 12878 : DRAFT 2012	PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST
08/30169537 DC : DRAFT APR 2008	BS EN 13164 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXTRUDED POLYSTYRENE FOAM (XPS) - SPECIFICATION
BS KIT 168 : 2005	CE MARKING FOR INSULATING GLASS UNITS (BS EN 1279 SERIES) KIT
05/30135337 DC : DRAFT JUN 2005	EN 15266 - STAINLESS STEEL PLIABLE CORRUGATED TUBING SYSTEMS IN BUILDINGS FOR GAS WITH AN OPERATING PRESSURE UP TO 0,5 BAR
BS 8417:2003	Preservation of timber. Recommendations
04/30108696 DC : DRAFT APR 2004	BS 8621 - THIEF RESISTANT LOCK AND LATCH ASSEMBLIES THAT ONLY ALLOW KEYLESS EGRESS
UNI EN 15288-1 : 2010	SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN
17/30296747 DC : 0	BS EN 15650 - VENTILATION FOR BUILDINGS - FIRE DAMPERS
NF EN 17140 : 2017 PR	THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE VACUUM INSULATION PANELS (VIP) - SPECIFICATION
NF EN 15037-2 : 2009 + A1 2011	PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 2: CONCRETE BLOCKS
11/30239941 DC : 0	BS EN 13257 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN SOLID WASTE DISPOSALS
BS 5534(2003) : 2003	CODE OF PRACTICE FOR SLATING AND TILING (INCLUDING SHINGLES)
09/30185894 DC : 0	BS EN 1344 - CLAY PAVERS - REQUIREMENTS AND TEST METHODS
06/30143171 DC : DRAFT SEP 2006	BS 7412 - PLASTICS WINDOWS AND DOORSETS MADE FROM UNPLASTICIZED POLYVINYL CHLORIDE (PVC-U) EXTRUDED HOLLOW PROFILES
BS EN 14229:2010	Structural timber. Wood poles for overhead lines
I.S. EN 14908-6:2014	OPEN DATA COMMUNICATION IN BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT - CONTROL NETWORK PROTOCOL - PART 6: APPLICATION ELEMENTS
PD CEN/TS 16526:2013	Sandwich boards for furniture (SWB-F). Factory made products. Definition, classification and test methods for determination of performance characteristics
08/30183125 DC : 0	BS EN 1857 - CHIMNEYS - COMPONENTS - CONCRETE FLUE LINERS
09/30202307 DC : 0	BS EN 12514-1 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS
01/541305 DC : DRAFT OCT 2001	BS EN 12101-6 - SMOKE AND HEAT CONTROL SYSTEMS - PART 6: PRESSURE DIFFERENTIAL SYSTEMS - KITS
10/30211862 DC : 0	BS EN 998-1 - SPECIFICATION FOR MORTAR FOR MASONRY - PART 1: RENDERING AND PLASTERING MORTAR
12/30254899 DC : 0	BS EN 54-2 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT
BS PD6682-6(2009) : 2009	AGGREGATES - PART 6: AGGREGATES FOR UNBOUND AND HYDRAULICALLY BOUND MATERIALS FOR USE IN CIVIL ENGINEERING WORKS AND ROAD CONSTRUCTION - GUIDANCE ON THE USE OF BS EN 13242
PD CLC/TR 50456:2008	Alarm systems. Guidelines to achieving compliance with EC directives for equipment of alarm systems
BS EN 14318-1:2013	Thermal insulating products for buildings. In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products Specification for the rigid foam dispensed system before installation
00/107014 DC : DRAFT OCT 2000	PREN 520 - GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
16/30314117 DC : 0	BS 9999 - FIRE SAFETY IN THE DESIGN, MANAGEMENT AND USE OF BUILDINGS - CODE OF PRACTICE
04/30110330 DC : DRAFT MAR 2004	EN 14889-1 - FIBRES FOR CONCRETE - PART 1: STEEL FIBRES - DEFINITION, SPECIFICATIONS AND CONFORMITY
11/30238644 DC : 0	BS EN 490 - CONCRETE ROOFING TILES AND FITTINGS FOR ROOF COVERING AND WALL CLADDING - PRODUCT SPECIFICATIONS
01/105368 DC : DRAFT JULY 2001	PREN 12337-2 - GLASS IN BUILDING - CHEMICALLY STRENGTHENED SODA LIME SILICATE GLASS - PART 2: EVALUATION OF CONFORMITY
PREN 14909 : DRAFT 2004	FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF COURSE - DEFINITIONS AND CHARACTERISTICS
08/30169540 DC : DRAFT APR 2008	BS EN 13165 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE RIGID POLYURETHANE FOAM (PUR) PRODUCTS - SPECIFICATION
BS EN 15258:2008	Precast concrete products. Retaining wall elements
04/30100025 DC : DRAFT JUN 2004	PREN 534 - CORRUGATED BITUMEN SHEETS - PRODUCT SPECIFICATION AND TEST METHODS
12/30259025 DC : 0	BS EN 50575 - POWER, CONTROL AND COMMUNICATION CABLES - CABLES FOR GENERAL APPLICATIONS IN CONSTRUCTION WORKS SUBJECT TO REACTION TO FIRE REQUIREMENTS
BS EN 12273:2008	Slurry surfacing. Requirements
DD CEN ISO/TS 15874-7:2003	Plastics piping systems for hot and cold water installations. Polypropylene (PP) Guidance for the assessment of conformity
DD CEN ISO/TS 15875-7:2003	Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X) Guidance for the assessment of conformity
14/30304113 DC : 0	BS EN 16497-2 - CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 2: BALANCED FLUE APPLICATIONS
11/30246672 DC : 0	BS EN 15286 - AGGLOMERATED STONE - SLABS AND TILES FOR WALL FINISHES (INTERNAL AND EXTERNAL)
04/30100932 DC : DRAFT AUG 2004	BS 6510 - STEEL-FRAMED WINDOWS AND GLAZED DOORS
BS EN 14967:2006	Flexible sheets for waterproofing. Bitumen damp proof courses. Definitions and characteristics
03/118296 DC : 0	BS EN 14846 - BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS
UNI EN 15650 : 2010	VENTILATION FOR BUILDINGS - FIRE DAMPERS
NF EN 14846 : 2008	BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS
98/108338 DC : DRAFT OCT 1998	PREN 13084-5 - FREE-STANDING INDUSTRIAL CHIMNEYS - PART 5: MATERIALS FOR BRICK LINERS - PRODUCT SPECIFICATIONS
04/30108691 DC : DRAFT APR 2004	BS 3621 - THIEF RESISTANT LOCK AND LATCH ASSEMBLIES THAT ONLY ALLOW EGRESS USING A KEY
NF EN 10080-1 : 99 PR	ACIERS POUR L'ARMATURE DU BETON - ARMATURES POUR BETON ARME SOUDABLES - PARTIE 1: PRESCRIPTIONS GENERALES
07/30156246 DC : 0	BS EN 1858 - CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS
00/540664 DC : 0	BS EN 12259-12 - FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEM - PART 12: SPRINKLER PUMPS
BS EN 10088-4:2009	Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
I.S. EN 60335-2-10:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-10: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES
S.R. CEN/TR 17005:2016	SUSTAINABILITY OF CONSTRUCTION WORKS - ADDITIONAL ENVIRONMENTAL IMPACT CATEGORIES AND INDICATORS - BACKGROUND INFORMATION AND POSSIBILITIES - EVALUATION OF THE POSSIBILITY OF ADDING ENVIRONMENTAL IMPACT CATEGORIES AND RELATED INDICATORS AND CALCULATION METHODS FOR THE ASSESSMENT OF THE ENVIRONMENTAL PERFORMANCE OF BUILDINGS
I.S. EN 60335-2-86:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-86: PARTICULAR REQUIREMENTS FOR ELECTRIC FISHING MACHINES
I.S. EN 60335-2-38:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-38: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRIDDLES AND GRIDDLE GRILLS
S.R. 24:2004	GUIDANCE ON THE USE AND APPLICATION OF EUROPEAN TEST METHOD STANDARDS FOR AGGREGATES
I.S. EN 60335-2-12:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES
I.S. EN ISO/TS 15875-7:2004	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CROSSLINKED POLYETHYLENE (PE-X) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
BS EN 15643-5:2017	Sustainability of construction works. Sustainability assessment of buildings and civil engineering works Framework on specific principles and requirement for civil engineering works
PREN 197-2 : DRAFT 2012	CEMENT - PART 2: CONFORMITY EVALUATION
CEN/TR 15840:2009	Evaluation of conformity of fly ash for concrete - Guidelines for the application of EN 450-2
PREN 16491 : DRAFT 2012	THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE COMPOSITE PRODUCTS - SPECIFICATION
UNE-EN 485-2:2017	Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties
I.S. EN 60335-2-45:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-45: PARTICULAR REQUIREMENTS FOR PORTABLE HEATING TOOLS AND SIMILAR APPLIANCES (IEC 60335-2-45:2002 (EQV))
I.S. EN 60335-2-84:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-84: PARTICULAR REQUIREMENTS FOR TOILETS
EN 60335-2-47:2003/A11:2012	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-47: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BOILING PANS (IEC 60335-2-47:2002)
I.S. EN 50290-4-2:2014	COMMUNICATION CABLES - PART 4-2: GENERAL CONSIDERATIONS FOR THE USE OF CABLES - GUIDE TO USE
EN 12897:2016	Water supply - Specification for indirectly heated unvented (closed) storage water heaters
NF EN 13055-1 : 2002	LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR, AND GROUT
EN 60335-2-59:2003/A2:2009	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-59: PARTICULAR REQUIREMENTS FOR INSECT KILLERS
UNE-EN 12201-2:2012	Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes
EN 60335-2-82:2003/A1:2008	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-82: PARTICULAR REQUIREMENTS FOR AMUSEMENT MACHINES AND PERSONAL SERVICE MACHINES
DIN EN 13969:2007-03	FLEXIBLE SHEETS FOR WATERPROOFING - BITUMEN DAMP PROOF SHEETS INCLUDING BITUMEN BASEMENT TANKING SHEETS - DEFINITIONS AND CHARACTERISTICS
DIN EN 12201-3:2013-01	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 3: FITTINGS
DIN EN 969:2009-07	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS
DIN EN 12094-8:2016-06 (Draft)	FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 8: REQUIREMENTS AND TEST METHODS FOR CONNECTORS
DIN EN 485-2:2016-10	ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES
DIN EN 14080:2013-09	TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS
DIN EN 13967:2012-07	FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF SHEETS INCLUDING PLASTIC AND RUBBER BASEMENT TANKING SHEET - DEFINITIONS AND CHARACTERISTICS
BS EN 40-5:2002	Lighting columns Requirements for steel lighting columns
BS EN 13658-1:2005	Metal lath and beads. Definitions, requirements and test methods Internal plastering
BS EN 13707:2013	Flexible sheets for waterproofing. Reinforced bitumen sheets for roof waterproofing. Definitions and characteristics
BS EN 14904:2006	Surfaces for sports areas. Indoor surfaces for multi-sports use. Specification
BS EN 934-5:2007	Admixtures for concrete, mortar and grout Admixtures for sprayed concrete. Definitions, requirements, conformity, marking and labelling
BS EN 621:2009	Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products
BS EN 13263-1 : 2005	SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA
BS EN 14023:2010	Bitumen and bituminous binders. Specification framework for polymer modified bitumens
BS EN 13984:2013	Flexible sheets for waterproofing. Plastic and rubber vapour control layers. Definitions and characteristics
BS EN 10255:2004	Non-alloy steel tubes suitable for welding and threading. Technical delivery conditions
BS EN 54-23:2010	Fire detection and fire alarm systems Fire alarm devices. Visual alarm devices
BS EN 12094-6:2006	Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for non-electrical disable devices
BS EN 12004 : 2007	ADHESIVES FOR TILES - REQUIREMENTS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION
UNE-EN 1857:2013	Chimneys - Components - Concrete flue liners
BS EN 13225:2013	Precast concrete products. Linear structural elements
BS EN 13171 : 2012	THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD FIBRE (WF) PRODUCTS - SPECIFICATION
BS EN 777-2:2009	Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System E. Safety
BS EN 15250:2007	Slow heat release appliances fired by solid fuel. Requirements and test methods
BS EN 12352:2006	Traffic control equipment. Warning and safety light devices
BS EN 295-5:2013	Vitrified clay pipe systems for drains and sewers Requirements for perforated pipes and fittings
BS EN 13101:2002	Steps for underground man entry chambers. Requirements, marking, testing and evaluation of conformity
BS EN 1935:2002	Building hardware. Single-axis hinges. Requirements and test methods
BS EN 1858 : 2008	CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS
BS EN 12676-1:2000	Anti-glare systems for roads Performance and characteristics
UNE-EN 15650:2010	Ventilation for buildings - Fire dampers
BS EN 1856-2:2009	Chimneys. Requirements for metal chimneys Metal flue liners and connecting flue pipes
BS EN 13747 : 2005	PRECAST CONCRETE PRODUCTS - FLOOR PLATES FOR FLOOR SYSTEMS
BS EN 10311:2005	Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids
BS EN 13970:2004	Flexible sheets for waterproofing. Bitumen water vapour control layers. Definitions and characteristics
BS EN 60695-8-2:2017	Fire hazard testing Heat release. Summary and relevance of test methods
BS EN 681-3:2000	Elastomeric seals. Materials requirements for pipe joint seals used in water and drainage applications Cellular materials of vulcanized rubber
BS EN 1857 : 2003	CHIMNEYS - COMPONENTS - CONCRETE FLUE LINERS
BS EN 14342:2013	Wood flooring and parquet. Characteristics, evaluation of conformity and marking
BS EN 777-4:2009	Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System H. Safety
BS EN 15102 : 2007	DECORATIVE WALL COVERINGS - ROLL AND PANEL FORM
BS EN 1337-6:2004	Structural bearings Rocker bearings
BS EN 1057 : 2006	COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR WATER AND GAS IN SANITARY AND HEATING APPLICATIONS
BS EN 777-1:2009	Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System D. Safety
BS EN 14188-3 : 2005	JOINT FILLERS AND SEALANTS - PART 3: SPECIFICATIONS FOR PREFORMED JOINT SEALS
BS EN 13748-2:2004	Terrazzo tiles Terrazzo tiles for external use
CEN/TS 16459:2013	External fire exposure of roofs and roof coverings - Extended application of test results from CEN/TS 1187
BS EN 54-2 : 1998	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT
BS EN 934-2 : 2009	ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 2: CONCRETE ADMIXTURES - DEFINITIONS, REQUIREMENTS, CONFORMITY, MARKING AND LABELLING
BS EN 13240 : 2001	ROOMHEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
BS EN 13055-1:2002	Lightweight aggregates Lightweight aggregates for concrete, mortar and grout
BS EN 934-4:2009	Admixtures for concrete, mortar and grout Admixtures for grout for prestressing tendons. Definitions, requirements, conformity, marking and labelling
BS EN 13084-7:2012	Free-standing chimneys Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners
UNE-EN 312:2010	Particleboards - Specifications
BS EN 12259-5:2002	Fixed firefighting systems. Components for sprinkler and water spray systems Water flow detectors
BS EN 13813:2002	Screed material and floor screeds. Screed material. Properties and requirements
BS EN 13279-1:2008	Gypsum binders and gypsum plasters Definitions and requirements
BS EN 14321-2:2005	Glass in building. Thermally toughened alkaline earth silicate safety glass Evaluation of conformity/Product standard
UNE-EN 14695:2010	Flexible sheets for waterproofing - Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics
BS EN 1337-7:2004	Structural bearings Spherical and cylindrical PTFE bearings
BS EN 14250:2010	Timber structures. Product requirements for prefabricated structural members assembled with punched metal plate fasteners
BS EN 1051-2:2007	Glass in building. Glass blocks and glass pavers Evaluation of conformity/Product standard
BS EN 14889-1:2006	Fibres for concrete Steel fibres. Definitions, specifications and conformity
BS EN 12951:2004	Prefabricated accessories for roofing. Permanently fixed roof ladders. Product specification and test methods
BS EN 1670:2007	Building hardware. Corrosion resistance. Requirements and test methods
DIN EN 14909:2012-07	FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF COURSES - DEFINITIONS AND CHARACTERISTICS
DIN EN 15088:2016-09 (Draft)	Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery; German and English version prEN 15088:2016
UNE-EN 13984:2013	Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics
DIN EN 54-20:2009-02	Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors (includes Amendment AC:2008)
UNE-EN 1858:2011	Chimneys - Components - Concrete flue blocks
BS EN 934-3 : 2009	ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 3: ADMIXTURES FOR MASONRY MORTAR - DEFINITIONS, REQUIREMENTS, CONFORMITY AND MARKING AND LABELLING
BS EN 15088:2005	Aluminium and aluminium alloys. Structural products for construction works. Technical conditions for inspection and delivery
DIN EN 54-18:2006-03	Fire detection and fire alarm systems - Part 18: Input/output devices
BS EN 12605:2000	Industrial, commercial and garage doors and gates. Mechanical aspects. Test methods
BS EN 12201-5:2011	Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) Fitness for purpose of the system
BS EN 14080:2013	Timber structures. Glued laminated timber and glued solid timber. Requirements
BS EN 15015:2007	Plastics piping systems. Systems for hot and cold water not intended for human consumption. Performance characteristics for pipes, fittings and their joints
BS EN 12860:2001	Gypsum based adhesives for gypsum blocks. Definitions, requirements and test methods
UNE-CEN/TR 15438:2012 IN	Plastics piping systems - Guidance for coding of products and their intended uses
BS EN 13956:2012	Flexible sheets for waterproofing. Plastic and rubber sheets for roof waterproofing. Definitions and characteristics
BS EN 13341 : 2005	STATIC THERMOPLASTIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED AND ROTATIONALLY MOULDED POLYETHYLENE TANKS AND ROTATIONALLY MOULDED TANKS MADE OF ANIONICALLY POLYMERIZED POLYAMIDE 6 - REQUIREMENTS AND TEST METHODS
BS EN 14449:2005	Glass in building. Laminated glass and laminated safety glass. Evaluation of conformity/product standard
BS EN 12101-1 : 2006	SMOKE AND HEAT CONTROL SYSTEMS - PART 1: SPECIFICATION FOR SMOKE BARRIERS
BS EN 12859:2011	Gypsum blocks. Definitions, requirements and test methods
BS EN 12966-3:2005	Road vertical signs. Variable message traffic signs Factory production control
BS EN 1317-5 : 2007	ROAD RESTRAINT SYSTEMS - PART 5: PRODUCT REQUIREMENTS AND EVALUATION OF CONFORMITY FOR VEHICLE RESTRAINT SYSTEMS
BS EN 1123-1:1999	Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems Requirements, testing, quality control
BS EN 12897:2016	Water supply. Specification for indirectly heated unvented (closed) storage water heaters
BS EN 1917:2002	Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced
EN 534:2006+A1:2010	Corrugated bitumen sheets - Product specification and test methods
EN 13241-1:2003+A1:2011	Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics
EN 14055:2010+A1:2015	WC and urinal flushing cisterns
EN 15286:2013	Agglomerated stone - Slabs and tiles for wall finishes (internal and external)
EN 15368:2008+A1:2010	Hydraulic binder for non-structural applications - Definition, specifications and conformity criteria
EN 16497-2:2017	Chimneys - Concrete System Chimneys - Part 2: Balanced flue applications
EN 14592:2008+A1:2012	Timber structures - Dowel-type fasteners - Requirements
EN 15266:2007	Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar
EN 14188-1:2004	Joint fillers and sealants - Part 1: Specifications for hot applied sealants
EN 1504-3:2005	Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair
EN 54-23:2010	Fire detection and fire alarm systems - Part 23: Fire alarm devices - Visual alarm devices
EN 14188-3:2006	Joint fillers and sealants - Part 3: Specifications for preformed joint seals
EN 14991:2007	Precast concrete products - Foundation elements
EN 13984:2013	Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics
EN 14908-6:2014	Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 6: Application elements
EN 15250:2007	Slow heat release appliances fired by solid fuel - Requirements and test methods
EN 15283-2:2008+A1:2009	Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards
EN 523:2003	Steel strip sheaths for prestressing tendons - Terminology, requirements, quality control
EN 14317-1:2004	Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation
EN 621:2009	Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products
EN 14904:2006	Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification
EN 777-2:2009	Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 2: System E - Safety
EN 14080:2013	Timber structures - Glued laminated timber and glued solid timber - Requirements
EN 13859-1:2014	Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing
EN 16687:2015	Construction products - Assessment of release of dangerous substances - Terminology
EN 13859-2:2014	Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls
EN 14963:2006	Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods
EN 13658-2:2005	Metal lath and beads - Definitions, requirements and test methods - Part 2: External rendering
EN 14909:2012	Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics
EN 14989-2:2007	Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 2: Flue and air supply ducts for room sealed appliances
EN 520:2004+A1:2009	Gypsum plasterboards - Definitions, requirements and test methods
EN 15088:2005	Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery
EN 15498:2008	Precast concrete products - Wood-chip concrete shuttering blocks - Product properties and performance
EN 14967:2006	Flexible sheets for waterproofing - Bitumen damp proof courses - Definitions and characteristics
EN 14321-2:2005	Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard
EN 14989-1:2007	Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 1: Vertical air/flue terminals for C6-type appliances
EN 13707:2013	Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics
EN 969:2009	Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods
EN 13748-2:2004	Terrazzo tiles - Part 2: Terrazzo tiles for external use
EN 14846:2008	Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods
EN 15814:2011+A2:2014	Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements
PD 6691:2010	Guidance on the use of BS EN 13108 Bituminous mixtures. Material specifications
EN 13171:2012+A1:2015	Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification
EN 14023:2010	Bitumen and bituminous binders - Specification framework for polymer modified bitumens
EN 778:2009	Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products
EN 295-6:2013	Vitrified clay pipes systems for drain and sewers - Part 6: Requirements for components of manholes and inspection chambers
EN 15037-2:2009+A1:2011	Precast concrete products - Beam-and-block floor systems - Part 2: Concrete blocks
EN 54-24:2008	Fire detection and fire alarm systems - Part 24: Components of voice alarm systems - Loudspeakers
EN 15389:2008	Industrial valves - Performance characteristics of thermoplastic valves when used as construction products
EN 14889-1:2006	Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity
EN 15037-4:2010+A1:2013	Precast concrete products - Beam-and-block floor systems - Part 4: Expanded polystyrene blocks
EN 15167-2:2006	Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Conformity evaluation
EN 416-1:2009	Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety
EN 1857:2010	Chimneys - Components - Concrete flue liners
EN 14525:2004	Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U PE, Fibre-cement
EN 15015:2007	Plastics piping systems - Systems for hot and cold water not intended for human consumption - Performance characteristics for pipes, fittings and their joints
EN 15821:2010	Multi-firing sauna stoves fired by natural wood logs - Requirements and test methods
EN 934-3:2009+A1:2012	Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling
EN 14844:2006+A2:2011	Precast concrete products - Box culverts
EN 13693:2004+A1:2009	Precast concrete products - Special roof elements
EN 179:2008	Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes - Requirements and test methods
EN 16485:2014	Round and sawn timber - Environmental Product Declarations - Product category rules for wood and wood-based products for use in construction
EN 40-6:2002	Lighting columns - Part 6: Requirements for aluminium lighting columns
EN 15743:2010+A1:2015	Supersulfated cement - Composition, specifications and conformity criteria
EN ISO/TS 15877-7 : 2003	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
EN 15600-1:2010	Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation
EN 14695:2010	Flexible sheets for waterproofing - Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics
EN 14934:2007	Thermal insulation and light weight fill products for civil engineering applications - Factory made products of extruded polystyrene foam (XPS) - Specification
EN 1858:2008+A1:2011	Chimneys - Components - Concrete flue blocks
EN 13747:2005+A2:2010	Precast concrete products - Floor plates for floor systems
EN 15037-3:2009+A1:2011	Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks
EN 295-10:2005	Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 10: Performance requirements
EN 777-1:2009	Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1: System D - Safety
EN 12842:2012	Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods
EN 934-4:2009	Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling
EN 15599-1:2010	Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation
EN 598:2007+A1:2009	Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods
EN 1856-2:2009	Chimneys - Requirements for metal chimneys - Part 2: Metal flue liners and connecting flue pipes
EN 14566:2008+A1:2009	Mechanical fasteners for gypsum plasterboard systems - Definitions, requirements and test methods
EN 197-4:2004	Cement - Part 4: Composition, specifications and conformity criteria for low early strength blastfurnace cements
EN 312:2010	Particleboards - Specifications
EN 295-5:2013	Vitrified clay pipe systems for drains and sewers - Part 5: Requirements for perforated pipes and fittings
EN 295-4:2013	Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings
EN 197-1:2011	Cement - Part 1: Composition, specifications and conformity criteria for common cements
EN 14992:2007+A1:2012	Precast concrete products - Wall elements
EN 14342:2013	Wood flooring and parquet - Characteristics, evaluation of conformity and marking
EN 15167-1:2006	Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity criteria
EN 15050:2007+A1:2012	Precast concrete products - Bridge elements
EN 15701:2016	Plastics - Thermoplastic jackets for insulation products for building equipment and industrial installations - Requirements and test methods
EN 15319:2007	General principles of design of fibrous (gypsum) plaster works
EN 777-3:2009	Multi-burner gas-fired overhead radiant tube heater systems for non domestic use - Part 3: System F - Safety
EN 14933:2007	Thermal insulation and light weight fill products for civil engineering applications - Factory made products of expanded polystyrene (EPS) - Specification
EN 13658-1:2005	Metal lath and beads - Definitions, requirements and test methods - Part 1: Internal plastering
EN 14889-2:2006	Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and conformity
EN 14179-2:2005	Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
EN 777-4:2009	Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 4: System H - Safety
EN 295-1:2013	Vitrified clay pipe systems for drains and sewers - Part 1: Requirements for pipes, fittings and joints
EN 14318-1:2013	Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam dispensed system before installation
EN 934-5:2007	Admixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed concrete - Definitions, requirements, conformity, marking and labelling
EN 14188-2:2004	Joint fillers and sealants - Part 2: Specifications for cold applied sealants
EN 14016-1:2004	Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 1: Definitions, requirements
EN 13813:2002	Screed material and floor screeds - Screed material - Properties and requirements
EN 14843:2007	Precast concrete products - Stairs
EN 15650:2010	Ventilation for buildings - Fire dampers
DIN EN 16485 E : 2014	ROUND AND SAWN TIMBER - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR WOOD AND WOOD-BASED PRODUCTS FOR USE IN CONSTRUCTION
01/107932 DC : DRAFT NOV 2001	BS EN 1504-5 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION
11/30239932 DC : 0	BS EN 13254 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR THE USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS
BS EN 14963:2006	Roof coverings. Continuous rooflights of plastics with or without upstands. Classification, requirements and test methods
12/30266154 DC : 0	BS EN 16497-1 - CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 1: NON-BALANCED FLUE APPLICATIONS
11/30248672 DC : 0	BS EN 13967 - FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF SHEETS INCLUDING PLASTIC AND RUBBER BASEMENT TANKING SHEET - DEFINITIONS AND CHARACTERISTICS
14/30295128 DC : 0	BS 7543 - GUIDE TO DURABILITY OF BUILDINGS AND BUILDING ELEMENTS, PRODUCTS AND COMPONENTS
11/30239920 DC : 0	BS EN 13250 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RAILWAYS
BS EN 16485:2014	Round and sawn timber. Environmental Product Declarations. Product category rules for wood and wood-based products for use in construction
15/30318434 DC : 0	BS 4873 - ALUMINIUM ALLOY WINDOWS AND DOORSETS - SPECIFICATION
DD CEN/TS 15447:2006	Mounting and fixing in reaction to fire tests under the Construction Products Directive
CEN/TR 16410:2012	Construction products - Assessment of release of dangerous substances - Barriers to use - Extension to CEN/TR 15855 Barriers to trade
BS 9999:2017	Fire safety in the design, management and use of buildings. Code of practice
11/30239923 DC : 0	BS EN 13251 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN EARTHWORKS, FOUNDATIONS AND RETAINING STRUCTURES
BS EN 15283-2 : 2008	GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS
08/30188489 DC : DRAFT AUG 2008	BS EN 54-27 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 27: DUCT SMOKE DETECTORS
S.R. CEN TR 15858:2009	CONSTRUCTION PRODUCTS - ASSESSMENT OF THE RELEASE OF REGULATED DANGEROUS SUBSTANCES FROM CONSTRUCTION PRODUCTS BASED ON THE WT, WFT/FT PROCEDURES
03/310921 DC : 0	EN 14732-1 - TIMBER STRUCTURES - PREFABRICATED WALL, FLOOR AND ROOF ELEMENTS - PART 1: PRODUCT REQUIREMENTS
DIN EN 16497-2:2017-07	CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 2: BALANCED FLUE APPLICATIONS
BS 8621:2004	Thief resistant lock assembly. Keyless egress
DIN EN 15650:2010-09	Ventilation for buildings - Fire dampers
10/30212804 DC : 0	BS 8417 - PRESERVATION OF WOOD - CODE OF PRACTICE
05/30134237 DC : DRAFT MAY 2005	BS EN 15250 - SLOW HEAT RELEASE APPLIANCES FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
14/30294063 DC : 0	BS EN 14908-6 - OPEN DATA COMMUNICATION IN BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT - CONTROL NETWORK PROTOCOL - PART 6: APPLICATION ELEMENTS
BS EN 13282-1:2013	Hydraulic road binders Rapid hardening hydraulic road binders. Composition, specifications and conformity criteria
PD CEN/TR 15840:2009	Evaluation of conformity of fly ash for concrete. Guidelines for the application of EN 450-2
06/30158068 DC : DRAFT NOV 2006	BS 8621 AMD 1 - THIEF RESISTANT LOCK ASSEMBLY - KEYLESS EGRESS
08/30188907 DC : DRAFT SEP 2008	BS EN 1317-6 - ROAD RESTRAINT SYSTEMS - PEDESTRIAN RESTRAINT SYSTEMS - PART 6: PEDESTRIAN PARAPET
99/105869 DC : DRAFT JUL 1999	EN 13658-1 - METAL LATH AND BEADS - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: INTERNAL PLASTERING
04/30055611 DC : 0	BS EN 124 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS
00/105249 DC : DRAFT JULY 2000	PREN 13956 - FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING - DEFINITIONS AND CHARACTERISTICS
03/118041 DC : DRAFT NOV 2003	EN 14188-3 - JOINT FILLERS AND SEALANTS - PART 3: SPECIFICATION FOR PREFORMED JOINT SEALS
01/107111 DC : DRAFT SEP 2001	BS EN 12566-3 - SMALL WASTEWATER TREATMENT SYSTEMS UP TO 50 PT - PACKAGED AND/OR SITE ASSEMBLED DOMESTIC WASTEWATER TREATMENT PLANTS
PD ISO/TR 21932:2013	Sustainability in buildings and civil engineering works. A review of terminology
09/30207868 DC : 0	BS EN 13859-2 - FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 2: UNDERLAYS FOR WALLS
00/541355 DC : 0	BS EN 12259-11 - FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEM - PART 11: MEDIUM AND HIGH VELOCITY WATER SPRAYERS
03/314374 DC : DRAFT DEC 2003	BS EN 14843 - PRECAST CONCRETE STAIRS
I.S. EN 15643-4:2012	SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 4: FRAMEWORK FOR THE ASSESSMENT OF ECONOMIC PERFORMANCE
BS EN 54-24:2008	Fire detection and fire alarm systems Components of voice alarm systems. Loudspeakers
04/30099887 DC : DRAFT MAY 2004	PREN 14963 - ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS
11/30239944 DC : 0	BS EN 13265 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN LIQUID WASTE CONTAINMENT PROJECTS
PD CEN/TR 16797-1:2015	Construction products: Assessment of release of dangerous substances. Guidance on the statistical assessment of declared values Principles and rules of application
04/19991587 DC : DRAFT MAY 2004	BS EN 1504-6 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 6: ANCHORING OF REINFORCING STEEL BAR
05/30130592 DC : DRAFT MAR 2005	BS EN 15167-1 - GROUND GRANULATED BLASTFURNACE SLAG FOR USE IN CONCRETE, MORTAR AND GROUT - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY CRITERIA
11/30229088 DC : 0	BS 5655-6 - LIFTS AND SERVICE LIFTS - PART 6: CODE OF PRACTICE FOR THE SELECTION AND INSTALLATION OF NEW LIFTS
04/30125694 DC : DRAFT NOV 2004	EN 15088 - ALUMINIUM AND ALUMINIUM ALLOYS - STRUCTURAL PRODUCTS FOR CONSTRUCTION WORKS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
CEN/TR 16797-1:2015	Construction products: Assessment of release of dangerous substances - Guidance on the statistical assessment of declared values - Part 1: Principles and rules of application
04/30113504 DC : DRAFT MAY 2004	BS EN 14933 - LIGHT WEIGHT FILL AND INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION
04/30126127 DC : 0	EN 15102 - DECORATIVE WALLCOVERINGS - ROLL AND PANEL FORM
NF EN 15650 : 2010	VENTILATION FOR BUILDINGS - FIRE DAMPERS
97/102206 DC : DRAFT MAR 1997	PREN 12794 - PRECAST CONCRETE FOUNDATION PILES
00/105248 DC : DRAFT JULY 2000	PREN 13859-1 - FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 1: UNDERLAYS FOR DISCONTINUOUS ROOFING
03/310127 DC : DRAFT JUNE 2003	EN 14716 - STRETCHED CEILINGS - REQUIREMENTS AND TEST METHODS
CEN/TR 15858:2009	Construction products - Assessment of the release of regulated dangerous substances from construction products based on the WT, WFT/FT procedures
DIN EN 16485:2014-07	ROUND AND SAWN TIMBER - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR WOOD AND WOOD-BASED PRODUCTS FOR USE IN CONSTRUCTION
UNI EN 16485 : 2014	ROUND AND SAWN TIMBER - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR WOOD AND WOOD-BASED PRODUCTS FOR USE IN CONSTRUCTION
NF EN 15037-3 : 2009 + A1 2011	PRECAST CONCRETE PRODUCTS - BEAM AND BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS
UNE-EN 15266:2008	Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar
EN 15643-5:2017	Sustainability of construction works - Sustainability assessment of buildings and civil engineering works - Part 5: Framework on specific principles and requirement for civil engineering works
PREN 13964 : DRAFT 2013	SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
EN 15254-4:2008+A1:2011	Extended application of results from fire resistance tests - Non-loadbearing walls - Part 4: Glazed constructions
PREN 15643-5 : DRAFT 2016	SUSTAINABILITY OF CONSTRUCTION WORKS - SUSTAINABILITY ASSESSMENT OF BUILDINGS AND CIVIL ENGINEERING WORKS - PART 5: FRAMEWORK FOR THE ASSESSMENT OF SUSTAINABILITY PERFORMANCE OF CIVIL ENGINEERING WORKS
EN 60335-2-73 : 2003 AMD 2 2009	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-73: PARTICULAR REQUIREMENTS FOR FIXED IMMERSION HEATERS
I.S. EN 14695:2010	FLEXIBLE SHEETS FOR WATERPROOFING - REINFORCED BITUMEN SHEETS FOR WATERPROOFING OF CONCRETE BRIDGE DECKS AND OTHER TRAFFICKED AREAS OF CONCRETE - DEFINITIONS AND CHARACTERISTICS
NF EN 1090-1 : 2009 + A1 2012	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS
I.S. EN 60335-2-23:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-23: PARTICULAR REQUIREMENTS FOR APPLIANCES FOR SKIN OR HAIR CARE
S.R. 17:2004	GUIDANCE ON THE USE OF I.S. EN 13043:2002 - AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS
I.S. EN 60335-2-51:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-51: PARTICULAR REQUIREMENTS FOR STATIONARY CIRCULATION PUMPS FOR HEATING AND SERVICE WATER INSTALLATIONS (IEC 60335-2-51:2002 (EQV))
I.S. EN 60335-2-71:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-71: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEATING APPLIANCES FOR BREEDING AND REARING ANIMALS
BS EN 1279-5 : 2005	GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY
17/30360253 DC : 0	BS EN 15288-1 - SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN
BS EN 15037-4 : 2010	PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 4: EXPANDED POLYSTYRENE BLOCKS
DIN EN 54-24:2008-06	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: COMPONENTS OF VOICE ALARM SYSTEMS - LOUDSPEAKERS
DD CEN ISO/TS 15876-7:2003	Plastics piping systems for hot and cold water installations. Polybutylene (PB) Guidance for the assessment of conformity
UNE-EN 60695-6-2:2012	Fire hazard testing - Part 6-2: Smoke obscuration - Summary and relevance of test methods
I.S. EN 60335-2-99:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-99: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC HOODS
16/30313668 DC : 0	BS EN 14064-1 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE-FILL MINERAL WOOL (MW) PRODUCTS - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION
NF EN 12101-4 : 2003 PR	INSTALLATIONS FIXES DE LUTTE CONTRE L'INCENDIE - SYSTEMES POUR LE CONTROLE DES FUMEES ET DE LA CHALEUR - PARTIE 4: INSTALLATIONS-KITS POUR LE CONTROLE DU FEU ET DES FUMEES
NF EN 15096 : 2008	DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - HOSE UNION ANTI-VACUUM VALVES - DN 15 TO DN 25 INCLUSIVE FAMILY H, TYPE B AND TYPE D - GENERAL TECHNICAL SPECIFICATIONS
XP P18 545 : 2008 XP	AGGREGATES - DEFINING ELEMENTS, CONFORMITY AND CODING
NF EN 15664-2 : 2010	INFLUENCE OF METALLIC MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - DYNAMIC RIG TEST FOR ASSESSMENT OF METAL RELEASE - PART 2: TEST WATERS
NF EN ISO 15876-1 : 2017	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTENE (PB) - PART 1: GENERAL
NF EN 15069 : 2017	SAFETY GAS CONNECTION VALVES FOR METAL HOSE ASSEMBLIES USED FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUEL
NF EN 10088-5 : 2009	STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
IEC TR 60695-8-2:2008	Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods
DIN EN 54-25:2015-10 (Draft)	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS
BS EN 15254-4 : 2008	EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTIONS
ISO/TR 21932:2013	Sustainability in buildings and civil engineering works A review of terminology
I.S. EN 60335-2-73:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-73: PARTICULAR REQUIREMENTS FOR FIXED IMMERSION HEATERS
I.S. EN ISO/TS 15877-7:2004	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
I.S. EN 15650:2010	VENTILATION FOR BUILDINGS - FIRE DAMPERS
I.S. EN 485-2:2016	ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES
I.S. EN 12897:2016	WATER SUPPLY - SPECIFICATION FOR INDIRECTLY HEATED UNVENTED (CLOSED) STORAGE WATER HEATERS
DIN EN 12201-2:2013-12	Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes (includes Amendment A1:2013)
DIN EN 13707:2013-12	FLEXIBLE SHEETS FOR WATERPROOFING - REINFORCED BITUMEN SHEETS FOR ROOF WATERPROOFING - DEFINITIONS AND CHARACTERISTICS
DIN EN 13859-2:2014-07	FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 2: UNDERLAYS FOR WALLS
BS EN 14188-2:2004	Joint fillers and sealants Specifications for cold applied sealants
BS EN 1993-1-2:2005	Eurocode 3. Design of steel structures General rules - Structural fire design
BS EN 1168 : 2005	PRECAST CONCRETE PRODUCTS - HOLLOW CORE SLABS
UNE-EN 12897:2017	Water supply - Specification for indirectly heated unvented (closed) storage water heaters
BS EN 13229 : 2001	INSET APPLIANCES INCLUDING OPEN FIRES FIRED BY SOLID FUELS - REQUIREMENTS AND TEST METHODS
13/30277762 DC : 0	BS EN 60695-8-2 IEC 60695-8-2 ED 1.0 - FIRE HAZARD TESTING - PART 8-2: HEAT RELEASE - SUMMARY AND RELEVANCE OF TEST METHODS
BS EN 1916:2002	Concrete pipes and fittings, unreinforced, steel fibre and reinforced
UNE-EN 12201-1:2012	Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
BS EN 15167-2:2006	Ground granulated blast furnace slag for use in concrete, mortar and grout Conformity evaluation
BS EN 13986 : 2004	WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
BS EN 60695-6-2:2011	Fire hazard testing Smoke obscuration. Summary and relevance of test methods
BS EN 10210-1:2006	Hot finished structural hollow sections of non-alloy and fine grain steels Technical delivery requirements
BS EN 1463-1:2009	Road marking materials. Retroreflecting road studs Initial performance requirements
BS EN 12259-1:1999	Fixed firefighting systems. Components for sprinkler and water spray systems Sprinklers
BS EN 1825-1:2004	Grease separators Principles of design, performance and testing, marking and quality control
13/30292989 DC : 0	BS EN 16687 - CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - TERMINOLOGY
BS EN 778:2009	Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products
BS EN 14604:2005	Smoke alarm devices
BS EN 14844 : 2006	PRECAST CONCRETE PRODUCTS - BOX CULVERTS
BS EN 13170 : 2012	THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXPANDED CORK (ICB) - SPECIFICATION
BS EN 13924:2006	Bitumen and bituminous binders. Specifications for hard paving grade bitumens
BS EN 1036-2:2008	Glass in building. Mirrors from silver-coated float glass for internal use Evaluation of conformity; product standard
BS EN 1337-4:2004	Structural bearings Roller bearings
PD IEC/TR 60695-8-2:2008	Fire hazard testing Heat release. Summary and relevance of test methods
BS EN 1155:1997	Building hardware. Electrically powered hold-open devices for swing doors. Requirements and test methods
BS EN 12842:2012	Ductile iron fittings for PVC-U or PE piping systems. Requirements and test methods
BS EN 13693 : 2004	PRECAST CONCRETE PRODUCTS - SPECIAL ROOF ELEMENTS
BS EN 15167-1:2006	Ground granulated blast furnace slag for use in concrete, mortar and grout Definitions, specifications and conformity criteria
BS EN 534 : 2006	CORRUGATED BITUMEN SHEETS - PRODUCT SPECIFICATION AND TEST METHODS
BS EN 777-3:2009	Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System F. Safety
BS EN 14934:2007	Thermal insulation and light weight fill products for civil engineering applications. Factory made products of extruded polystyrene foam (XPS). Specification
BS EN 1319:2009	Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW
BS EN 13859-1:2014	Flexible sheets for waterproofing. Definitions and characteristics of underlays Underlays for discontinuous roofing
BS EN 15319:2007	General principles of design of fibrous (gypsum) plaster works
BS EN 197-4:2004	Cement Composition, specifications and conformity criteria for low early strength blastfurnace cements
BS EN 295-6:2013	Vitrified clay pipes systems for drain and sewers Requirements for components of manholes and inspection chambers
BS EN 858-1:2002	Separator systems for light liquids (e.g. oil and petrol) Principles of product design, performance and testing, marking and quality control
BS EN 13964:2014	Suspended ceilings. Requirements and test methods
BS EN 10219-1:2006	Cold formed welded structural hollow sections of non-alloy and fine grain steels Technical delivery requirements
BS EN 14909:2012	Flexible sheets for waterproofing. Plastic and rubber damp proof courses. Definitions and characteristics
BS EN 1996-1-2:2005	Eurocode 6. Design of masonry structures General rules. Structural fire design
BS EN 14179-2:2005	Glass in building. Heat-soaked thermally-toughened soda lime silicate safety glass Evaluation of conformity/product standard
BS 6150(2006) : 2006	PAINTING OF BUILDINGS - CODE OF PRACTICE
EN 60335-2-81:2003/A2:2012	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-81: PARTICULAR REQUIREMENTS FOR FOOT WARMERS AND HEATING MATS (IEC 60335-2-81:2002/A2:2011)
EN 10080:2005	Steel for the reinforcement of concrete - Weldable reinforcing steel - General
CEN/TR 16098:2010	Construction products: Assessment of release of dangerous substances - Concept of horizontal testing procedures in support of requirements under the CPD
EN 13564-1:2002	Anti-flooding devices for buildings - Part 1: Requirements
EN 12380:2002	Air admittance valves for drainage systems - Requirements, tests methods and evaluation of conformity
EN 13170:2012+A1:2015	Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
EN 60335-2-71 : 2003 AMD 1 2007	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-71: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEATING APPLIANCES FOR BREEDING AND REARING ANIMALS
BS 4873:2009	Aluminium alloy windows and doorsets. Specification
EN 12591:2009	Bitumen and bituminous binders - Specifications for paving grade bitumens
EN 13063-3:2007	Chimneys - System chimneys with clay/ceramic flue liners - Part 3: Requirements and test methods for air flue system chimneys
EN 13101:2002	Steps for underground man entry chambers - Requirements, marking, testing and evaluation of conformity
EN 1036-2:2008	Glass in building - Mirrors from silver-coated float glass for internal use - Part 2: Evaluation of conformity; product standard
EN 1020:2009	Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products
EN 60335-2-80:2003/A2:2009	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-80: PARTICULAR REQUIREMENTS FOR FANS
DIN EN 54-21:2006-08	Fire detection and fire alarm systems - Part 21: Alarm transmission and fault warning routing equipment
EN 60335-2-88:2002	Household and similar electrical appliances - Safety - Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems
EN 60335-2-91:2003	Household and similar electrical appliances - Safety - Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers
DIN EN 13055-2:2004-09	LIGHTWEIGHT AGGREGATES - PART 2: LIGHTWEIGHT AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS
EN 1463-1:2009	Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements
DIN EN 14525:2005-02	Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: Ductile iron, grey iron, steel, PVC-U, PE, fibre-cement
CEN/TS 15447:2006	Mounting and fixing in reaction to fire tests under the Construction Products Directive
EN 10343:2009	Steels for quenching and tempering for construction purposes - Technical delivery conditions
EN 10088-5:2009	Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
NF EN ISO 15876-5 : 2017	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTENE (PB) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM
DIN EN 312:2010-12	Particleboards - Specifications
EN 12101-8:2011	Smoke and heat control systems - Part 8: Smoke control dampers
EN 50290-4-2:2014	Communication cables - Part 4-2: General considerations for the use of cables - Guide to use
EN 12094-4:2004	Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators
EN 60335-2-10:2003/A1:2008	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-10: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES
EN 60335-2-51:2003/A2:2012	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-51: PARTICULAR REQUIREMENTS FOR STATIONARY CIRCULATION PUMPS FOR HEATING AND SERVICE WATER INSTALLATIONS (IEC 60335-2-51:2002/A2:2011)
EN 60335-2-23:2003/A2:2015	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-23: PARTICULAR REQUIREMENTS FOR APPLIANCES FOR SKIN OR HAIR CARE (IEC 60335-2-23:2003/A2:2012, MODIFIED)
DIN EN 15088:2006-03	Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery; German version EN 15088:2005
EN 13502:2002	Chimneys - Requirements and test methods for clay/ceramic flue terminals
EN 13279-1:2008	Gypsum binders and gypsum plasters - Part 1: Definitions and requirements
DIN EN 545:2011-09	Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
EN 50399 : 2011 AMD 1 2016	COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - TEST APPARATUS, PROCEDURES, RESULTS
DIN EN 54-16:2008-06	Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment
EN 60335-2-45:2002/A2:2012	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-45: PARTICULAR REQUIREMENTS FOR PORTABLE HEATING TOOLS AND SIMILAR APPLIANCES (IEC 60335-2-45:2002/A2:2011)
EN 60695-6-2:2011	FIRE HAZARD TESTING - PART 6-2: SMOKE OBSCURATION - SUMMARY AND RELEVANCE OF TEST METHODS (IEC 60695-6-2:2011)
EN 12201-3:2011+A1:2012	Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 3: Fittings
EN 10255:2004+A1:2007	Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions
CEN/TR 15438:2007	Plastics piping systems - Guidance for coding of products and their intended uses
PP 7312:2002	STRUCTURAL DESIGN - EXTRACTS FROM BRITISH STANDARDS FOR STUDENTS OF STRUCTURAL DESIGN
UNE-EN 12201-3:2012	Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 3: Fittings
UNE-EN 771-2:2011	Specification for masonry units - Part 2: Calcium silicate masonry units
UNE-EN 13967:2013	Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

Shopping Cart

89/106/EEC : 1988

COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS

Shopping Cart

89/106/EEC : 1988

COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS

Abstract

General Product Information

Standards Referenced By This Book

Category

Subcategory