VDI 3388:2012-03
Current
Current
The latest, up-to-date edition.
Materials for trimming and forming dies
Available format(s)
Hardcopy , PDF
Language(s)
German - English
Published date
01-03-2012
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Preliminary note
1 Scope
2 Casting materials
3 Rolled and forged steels
4 Non-ferrous metals
5 Synthetic materials
Bibliography
Pertains to make the selection of materials for the manufacture of large stamping dies and their storage easier.
| DocumentType |
Standard
|
| Pages |
31
|
| PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
| Status |
Current
|
| Supersedes |
| VDI 3357:2014-01 | Sliding elements in large stamping dies |
| VDI 3349:2013-09 | Trim steels for large stamping dies |
| VDI 3120:2015-06 | Cast steel wall thicknesses in large stamping and forming dies - Design references for tools with more than 1000 mm side length |
| VDI 3381:2012-01 | Polysterene foam patterns - Design instructions for cast iron and cast steel dies |
| VDI 3387:2014-09 | Heel guidings in large stamping and forming dies |
| EN 10293:2015 | Steel castings - Steel castings for general engineering uses |
| DIN EN 1561:2012-01 | Founding - Grey cast irons; German version EN 1561:2011 |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| DIN EN 10025-1:2011-04 (Draft) | Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version prEN 10025-1:2011 |
| EN ISO 527-2:2012 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
| PREN 10025-2 : DRAFT 2011 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
| DIN 9835-3:1984-03 | ELASTOMER PRESSURE SPRINGS FOR PRESS TOOLS; TESTING AND REQUIREMENTS |
| EN ISO 604:2003 | Plastics - Determination of compressive properties (ISO 604:2002) |
| ISO 4957:1999 | Tool steels |
| EN ISO 527-1:2012 | Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) |
| DIN EN 10025-2:2011-04 (Draft) | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
| DIN 53752:1980-12 | TESTING OF PLASTICS; DETERMINATION OF THE COEFFICIENT OF LINEAR THERMAL EXPANSION |
| EN 10025-1:2004 | Hot rolled products of structural steels - Part 1: General technical delivery conditions |
| DIN EN 1563:2015-07 (Draft) | FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
| EN ISO 4957:1999 | Tool steels (ISO 4957:1999) |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| DIN EN 611-1:1995-09 | TIN AND TIN ALLOYS - PEWTER AND PEWTERWARE - PART 1: PEWTER |
| DIN EN 10293:2015-04 | STEEL CASTINGS - STEEL CASTINGS FOR GENERAL ENGINEERING USES |
| DIN EN 12844:1999-01 | ZINC AND ZINC ALLOYS - CASTINGS - SPECIFICATIONS |
| VDI 1000:2017-02 | VDI Standardisation Work - Principles and procedures |
| DIN EN ISO 18265:2014-02 | METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013) |
| ISO 604:2002 | Plastics — Determination of compressive properties |
| EN 1563:2011 | Founding - Spheroidal graphite cast irons |
| DIN 53505:2000-08 | TESTING OF RUBBER - SHORE A AND SHORE D HARDNESS TEST |
| EN 10083-1:2006 | Steels for quenching and tempering - Part 1: General technical delivery conditions |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| PREN 10025-1 : DRAFT 2011 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| PREN 1563 : DRAFT 2015 | FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
| EN 10084:2008 | Case hardening steels - Technical delivery conditions |
| EN 12844:1998 | Zinc and zinc alloys - Castings - Specifications |
| EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
| DIN EN ISO 4957:2001-02 | TOOL STEELS |
| DIN EN 1982:2016-01 (Draft) | COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS |
| EN ISO 18265:2013 | Metallic materials - Conversion of hardness values (ISO 18265:2013) |
| EN 1982:2017 | Copper and copper alloys - Ingots and castings |
| DIN EN 10027-1:2016-02 (Draft) | DESIGNATION SYSTEMS FOR STEELS - PART 1: STEEL NAMES |
| EN 611-1:1995 | Tin and tin alloys - Pewter and pewterware - Part 1: Pewter |
| EN ISO 1183-1:2012 | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
| ISO 18265:2013 | Metallic materials — Conversion of hardness values |
| DIN EN ISO 604:2003-12 | PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES |
| EN 1561:2011 | Founding - Grey cast irons |
| ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
| ISO 2781:2008 | Rubber, vulcanized or thermoplastic Determination of density |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.