UNI EN 15836-2 : 2010
Current
The latest, up-to-date edition.
PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM
09-09-2010
Foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Sampling and conditioning
5 Membrane composition
6 Visual characteristics
7 Physico-chemical characteristic
8 Dimensional characteristics
9 Mechanical characteristics
10 Characteristics for durability
11 Storage conditions
12 Installation, refurbishment, exploitation and maintenance
13 Designation and marking
Annex A (normative) - Determination of the contents of CaCO[3],
heavy metals and other elements
Annex B (normative) - Testing of slip resistance
Annex C (normative) - Assessment of chlorine resistance
Annex D (normative) - Assessment of the resistance to staining
agents
Bibliography
Ascertains the visual, dimensional, mechanical and durability characteristics of reinforced membranes made of plasticized poly(vinyl chloride) (PVC-P) sheets assembled together a polyester reinforcement, whose nominal thickness is greater than or equal to 1,5 mm, intended to be used to contribute to the leaktightness of inground swimming pools, implemented in situ. Also determines the characteristics of the composition of the PVC-P used to produce the membranes.
| DocumentType |
Standard
|
| PublisherName |
Ente Nazionale Italiano di Unificazione (UNI)
|
| Status |
Current
|
| Standards | Relationship |
| EN 15836-2:2010 | Identical |
| ISO 7724-1:1984 | Paints and varnishes Colorimetry Part 1: Principles |
| EN ISO 62:2008 | Plastics - Determination of water absorption (ISO 62:2008) |
| EN ISO 5470-1:2016 | Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:2016) |
| EN 1107-2:2001 | Flexible sheets for waterproofing - Determination of dimensional stability - Part 2: Plastic and rubber sheets for roof waterproofing |
| EN 1849-2:2009 | Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets |
| EN 495-5:2013 | Flexible sheets for waterproofing - Determination of foldability at low temperature - Part 5: Plastic and rubber sheets for roof waterproofing |
| EN 1848-2:2001 | Flexible sheets for waterproofing - Determination of length, width, straightness and flatness - Part 2: Plastic and rubber sheets for roof waterproofing |
| EN 15346:2014 | Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates |
| ISO 7724-2:1984 | Paints and varnishes Colorimetry Part 2: Colour measurement |
| EN 12311-2:2013 | Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing |
| ISO 846:1997 | Plastics Evaluation of the action of microorganisms |
| ISO 12572:2016 | Hygrothermal performance of building materials and products Determination of water vapour transmission properties Cup method |
| EN 12310-2:2000 | Flexible sheets for waterproofing - Determination of resistance to tearing - Part 2: Plastic and rubber sheets for roof waterproofing |
| EN ISO 12572:2016 | Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016) |
| EN 12316-2:2013 | Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing |
| ISO 7724-3:1984 | Paints and varnishes Colorimetry Part 3: Calculation of colour differences |
| EN 13451-1:2011+A1:2016 | Swimming pool equipment - Part 1: General safety requirements and test methods |
| ISO 175:2010 | Plastics Methods of test for the determination of the effects of immersion in liquid chemicals |
| ISO 5470-1:2016 | Rubber- or plastics-coated fabrics Determination of abrasion resistance Part 1: Taber abrader |
| EN 15347:2007 | Plastics - Recycled Plastics - Characterisation of plastics wastes |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| EN ISO 846:1997 | Plastics - Evaluation of the action of microorganisms (ISO 846:1997) |
| ISO 62:2008 | Plastics Determination of water absorption |
| EN ISO 291:2008 | Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008) |
| ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties |
| EN 20105-A02:1994 | Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993) |
| ISO 105-A02:1993 | Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour |
| EN ISO 4892-2:2013 | Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) |
| EN 1850-2:2001 | Flexible sheets for waterproofing - Determination of visible defects - Part 2: Plastic and rubber sheets for roof waterproofing |
| EN ISO 175:2010 | Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.