UNI EN 1520 : 2011
Current
Current
The latest, up-to-date edition.
Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non- structural reinforcement
Published date
07-04-2011
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Properties and requirements of materials
5 Properties and requirements of components
6 Evaluation of conformity
7 Basis for design
8 Marking, labelling and designation
Annex A (normative) - Design of components by calculation
Annex B (informative) - Design of components by testing
Annex C (informative) - Recommended values for partial safety
factor
Annex ZA (informative) - Provisions for the CE marking of
prefabricated components of lightweight aggregate
concrete with open structure with structural or
non-structural reinforcement under the EU Construction
Product Directive
Bibliography
Defines prefabricated components of lightweight aggregate concrete (LAC) with open structure and with structural or non-structural reinforcement intended to be used in building construction.
| Committee |
CT 21
|
| DocumentType |
Standard
|
| PublisherName |
Ente Nazionale Italiano di Unificazione (UNI)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SN EN 1520 : 2011 | Identical |
| NBN EN 1520 : 2011 | Identical |
| DIN EN 1520:2011-06 | Identical |
| BS EN 1520:2011 | Identical |
| EN 1520:2011 | Identical |
| NS EN 1520 : 2011 | Identical |
| NF EN 1520 : 2011 | Identical |
| NEN EN 1520 : 2011 | Identical |
| UNE-EN 1520:2003 | Identical |
| I.S. EN 1520:2011 | Identical |
| EN 12667:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance |
| ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
| CEN/TR 15728:2016 | Design and use of inserts for lifting and handling of precast concrete elements |
| EN 1521:1996 | Determination of flexural strength of lightweight aggregate concrete with open structure |
| ISO 717-2:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| EN 12939:2000 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance |
| EN 1365-3:1999 | Fire resistance tests for loadbearing elements - Part 3: Beams |
| ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
| EN 1364-1:1999 | Fire resistance tests for non-loadbearing elements - Part 1: Walls |
| EN 1739:2007 | Determination of shear strength for in-plane forces of joints between prefabricated components of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| ISO 140-6:1998 | Acoustics Measurement of sound insulation in buildings and of building elements Part 6: Laboratory measurements of impact sound insulation of floors |
| EN 1740:1998 | Performance test for prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure under predominantly longitudinal load (vertical components) |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN ISO 1182:2010 | Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010) |
| EN ISO 717-2:2013 | Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:2013) |
| ISO 140-3:1995 | Acoustics — Measurement of sound insulation in buildings and of building elements — Part 3: Laboratory measurements of airborne sound insulation of building elements |
| EN 1745:2012 | Masonry and masonry products - Methods for determining thermal properties |
| EN 13501-2:2016 | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
| EN 10080:2005 | Steel for the reinforcement of concrete - Weldable reinforcing steel - General |
| EN 14388:2015 | Road traffic noise reducing devices - Specifications |
| EN 10025-1:2004 | Hot rolled products of structural steels - Part 1: General technical delivery conditions |
| EN 1354:2005 | Determination of compressive strength of lightweight aggregate concrete with open structure |
| ISO 1182:2010 | Reaction to fire tests for products Non-combustibility test |
| EN ISO 6946:2017 | Building components and building elements - Thermal resistance and thermal transmittance - Calculation methods (ISO 6946:2017, Corrected version 2021-12) |
| ISO 12572:2016 | Hygrothermal performance of building materials and products Determination of water vapour transmission properties Cup method |
| EN 12354-1:2000 | Building Acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms |
| ISO 15148:2002 | Hygrothermal performance of building materials and products — Determination of water absorption coefficient by partial immersion |
| EN ISO 12572:2016 | Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016) |
| EN ISO 140-6 : 1998 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 6: LABORATORY MEASUREMENTS OF IMPACT SOUND INSULATION OF FLOORS |
| EN ISO 354:2003 | Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
| EN 1742:1998 | Determination of shear strength between different layers of multilayer components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| EN 991:1995 | Determination of the dimension of prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| EN 1355:1996 | Determination of creep strains under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| EN 12664:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance |
| EN 1352:1996 | Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| EN 1356:1996 | Performance test for prefabricated reinforced components of autoclaved aerated concrete or lightweight aggregate concrete with open structure under transverse load |
| EN 990:2002 | Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure |
| ISO 10456:2007 | Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| EN 992:1995 | Determination of the dry density of lightweight aggregate concrete with open structure |
| EN 1793-1:2017 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption under diffuse sound field conditions |
| ISO 717-1:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation |
| EN 1365-4:1999 | Fire resistance tests for loadbearing elements - Part 4: Columns |
| EN 1741:1998 | Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| ISO 6946:2017 | Building components and building elements — Thermal resistance and thermal transmittance — Calculation methods |
| EN ISO 1716:2010 | Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
| EN 1365-2:2014 | Fire resistance tests for loadbearing elements - Part 2: Floors and roofs |
| EN 12354-2:2000 | Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms |
| EN 1793-2:2012 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.