UNI EN 15090 : 2012
Current
The latest, up-to-date edition.
FOOTWEAR FOR FIREFIGHTERS
01-03-2012
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Classification, design and type
5 Sampling and conditioning
6 Requirements
7 Test methods
8 Marking
9 Information to be supplied
Annex A (informative) - Example of guidelines
and considerations for performing a risk
Annex B (normative) - Assessment of the footwear
by the laboratory during testing of thermal
Annex C (informative) - Assessment of the footwear
by the wearer
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 89/686/EEC
Bibliography
Describes minimum requirements and test methods for the performance of three types of footwear for use by firefighters for fire suppression, general-purpose rescue, fire rescue and hazardous materials emergencies.
| Committee |
CT 42
|
| DocumentType |
Standard
|
| PublisherName |
Ente Nazionale Italiano di Unificazione (UNI)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 15090 : 2012 | Identical |
| NBN EN 15090 : 2012 | Identical |
| NEN EN 15090 : 2012 | Identical |
| NS EN 15090 : 2012 | Identical |
| I.S. EN 15090:2012 | Identical |
| SN EN 15090 : 2012 | Identical |
| UNE-EN 15090:2012 | Identical |
| BS EN 15090:2012 | Identical |
| EN 15090:2012 | Identical |
| DIN EN 15090:2012-04 | Identical |
| UNI 11047 : 2014 | PERSONAL PROTECTIVE EQUIPMENT - GUIDELINES FOR SELECTION AND USE OF PERSONAL PROTECTIVE EQUIPMENT USED FOR WILDLAND FIREFIGHTING |
| UNI/TR 11430 : 2011 | SAFETY, PROTECTIVE AND OCCUPATIONAL FOOTWEAR - CRITERIA PER SELECTION, USE, CARE AND MAINTENANCE |
| EN ISO 3377-1:2011 | Leather - Physical and mechanical tests - Determination of tear load - Part 1: Single edge tear (ISO 3377-1:2011) |
| EN 943-2:2002 | Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 2: Performance requirements for "gas-tight" (Type 1) chemical protective suits for emergency teams (ET) |
| EN ISO 3376:2011 | Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension (ISO 3376:2011) |
| ISO 4045:2008 | Leather Chemical tests Determination of pH |
| PREN ISO 20347 : DRAFT 2009 | PERSONAL PROTECTIVE EQUIPMENT - OCCUPATIONAL FOOTWEAR |
| EN 13832-1:2006 | Footwear protecting against chemicals - Part 1: Terminology and test methods |
| EN ISO 20344:2011 | Personal protective equipment - Test methods for footwear (ISO 20344:2011) |
| ISO 4649:2017 | Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device |
| ISO 6942:2002 | Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat |
| EN ISO 4674-2:1998 | Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 2: Ballistic pendulum method (ISO 4674-2:1998) |
| ISO 3758:2012 | Textiles — Care labelling code using symbols |
| EN 388 : 1994 | PROTECTIVE GLOVES AGAINST MECHANICAL RISKS |
| ISO 2023:1994 | Rubber footwear Lined industrial vulcanized-rubber boots Specification |
| ISO 34-1:2015 | Rubber, vulcanized or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent test pieces |
| EN ISO 4045:2008 | Leather - Chemical tests - Determination of pH (ISO 4045:2008) |
| ISO 15538:2001 | Protective clothing for firefighters — Laboratory test methods and performance requirements for protective clothing with a reflective outer surface |
| ISO 15025:2016 | Protective clothing Protection against flame Method of test for limited flame spread |
| EN 13832-3:2006 | Footwear protecting against chemicals - Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions |
| ISO 3377-2:2016 | Leather — Physical and mechanical tests — Determination of tear load — Part 2: Double edge tear |
| EN ISO 3377-2:2016 | Leather - Physical and mechanical tests - Determination of tear load - Part 2: Double edge tear (ISO 3377-2:2016) |
| EN ISO 4674-1:2016 | Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods (ISO 4674-1:2016) |
| ISO 4643:1992 | Moulded plastics footwear — Lined or unlined poly(vinyl chloride) boots for general industrial use — Specification |
| ISO 4674-2:1998 | Rubber- or plastics-coated fabrics Determination of tear resistance Part 2: Ballistic pendulum method |
| EN ISO 20345:2011 | Personal protective equipment - Safety footwear (ISO 20345:2011) |
| EN 50321:1999 | Electrically insulating footwear for working on low voltage installations |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| ENV 13005 : DRAFT 1999 | GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT |
| EN ISO 15025:2016 | Protective clothing - Protection against flame - Method of test for limited flame spread (ISO 15025:2016) |
| EN 13287:2004 | Personal protective equipment - Footwear - Test method for slip resistance |
| EN ISO 3758:2012 | Textiles - Care labelling code using symbols (ISO 3758:2012) |
| ISO 3376:2011 | Leather Physical and mechanical tests Determination of tensile strength and percentage extension |
| ISO 34-2:2015 | Rubber, vulcanized or thermoplastic Determination of tear strength Part 2: Small (Delft) test pieces |
| ISO 4674-1:2016 | Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods |
| EN ISO 6942:2002 | Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2002) |
| EN 13832-2:2006 | Footwear protecting against chemicals - Part 2: Requirements for footwear resistant to chemicals under laboratory conditions |
| ISO 3377-1:2011 | Leather — Physical and mechanical tests — Determination of tear load — Part 1: Single edge tear |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.