UNI EN 14140 : 2015
Current
Current
The latest, up-to-date edition.
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
Published date
15-01-2015
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Materials
5 Design
6 Construction and workmanship
7 Tests and examinations
8 Technical requirements for type approval
9 Initial inspection and tests
10 Marking
11 Documentation
12 Certification
Annex A (normative) - Additional manufacturers markings
Annex B (informative) - Over-moulded cylinder
Annex C (informative) - Hot Air Balloon Cylinders
Annex D (informative) - Environmental checklist
Bibliography
Describes the minimum requirements for the design, construction and testing during manufacture of transportable refillable welded steel Liquefied Petroleum Gas (LPG) cylinders, of water capacity from 0,5 l up to and including 150 l, exposed to temperatures of -20 degree C to +65 degree C.
| Committee |
CT 37
|
| DocumentType |
Standard
|
| PublisherName |
Ente Nazionale Italiano di Unificazione (UNI)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN EN 14140 : 2014 C1 2015 | Identical |
| NS EN 14140 : 2014 AC 2015 | Identical |
| I.S. EN 14140:2014 | Identical |
| BS EN 14140:2014 | Identical |
| SN EN 14140 : 2015 CORR 2015 | Identical |
| UNE-EN 14140:2015 | Identical |
| NF EN 14140 : 2015 | Identical |
| DIN EN 14140:2015-03 | Identical |
| NBN EN 14140 : 2015 COR 2015 | Identical |
| DIN EN 14140:2017-01 | Identical |
| UNI 7051 : 2013 | BOTTLES FOR PROPANE - FUNDAMENTAL DIMENSIONS |
| ISO 17636-1:2013 | Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film |
| ISO 11997-2:2013 | Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light |
| EN ISO 6520-1:2007 | Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007) |
| EN ISO 14021:2016 | Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:2016) |
| EN 10120:2017 | Steel sheet and strip for welded gas cylinders |
| ISO 2812-2:2007 | Paints and varnishes Determination of resistance to liquids Part 2: Water immersion method |
| ISO 6520-1:2007 | Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion welding |
| ISO 14245:2006 | Gas cylinders Specifications and testing of LPG cylinder valves Self-closing |
| ISO 11114-1:2012 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials |
| EN ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004) |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| EN ISO 3231:1997 | Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide (ISO 3231:1993) |
| ISO 14732:2013 | Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials |
| EN ISO 643:2012 | Steels - Micrographic determination of the apparent grain size (ISO 643:2012) |
| ISO 14024:1999 | Environmental labels and declarations Type I environmental labelling Principles and procedures |
| ISO 14021:2016 | Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling) |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
| ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
| EN ISO 11997-2:2013 | Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013) |
| ISO 11363-1:2010 | Gas cylinders 17E and 25E taper threads for connection of valves to gas cylinders Part 1: Specifications |
| EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| EN ISO 14732:2013 | Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013) |
| ISO 5173:2009 | Destructive tests on welds in metallic materials — Bend tests |
| EN ISO 9712:2012 | Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012) |
| EN 1439:2017 | LPG equipment and accessories - Procedure for checking transportable refillable LPG cylinders before, during and after filling |
| EN 10028-7:2016 | Flat products made of steels for pressure purposes - Part 7: Stainless steels |
| EN ISO 19232-1:2013 | Non-destructive testing - Image quality of radiographs - Part 1: Determination of the image quality value using wire-type image quality indicators (ISO 19232-1:2013) |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| EN ISO 19232-2:2013 | Non-destructive testing - Image quality of radiographs - Part 2: Determination of the image quality value using step/hole-type image quality indicators (ISO 19232-2:2013) |
| EN 10272:2016 | Stainless steel bars for pressure purposes |
| ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
| EN ISO 17637:2016 | Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2016) |
| ISO 4624:2016 | Paints and varnishes — Pull-off test for adhesion |
| EN ISO 17639:2013 | Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds (ISO 17639:2003) |
| EN ISO 14025:2010 | Environmental labels and declarations - Type III environmental declarations - Principles and procedures (ISO 14025:2006) |
| ISO 15995:2006 | Gas cylinders Specifications and testing of LPG cylinder valves Manually operated |
| ISO 17636-2:2013 | Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors |
| EN 1442:2017 | LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction |
| ISO 17639:2003 | Destructive tests on welds in metallic materials Macroscopic and microscopic examination of welds |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN ISO 4624:2016 | Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016) |
| ISO 17637:2016 | Non-destructive testing of welds Visual testing of fusion-welded joints |
| EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| EN ISO 17636-2:2013 | Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2013) |
| ISO 19232-1:2013 | Non-destructive testing — Image quality of radiographs — Part 1: Determination of the image quality value using wire-type image quality indicators |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| ISO 14025:2006 | Environmental labels and declarations — Type III environmental declarations — Principles and procedures |
| EN ISO 4136:2012 | Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012) |
| EN 14894:2013 | LPG equipment and accessories - Cylinder and drum marking |
| ISO 19232-2:2013 | Non-destructive testing — Image quality of radiographs — Part 2: Determination of the image quality value using step/hole-type image quality indicators |
| ISO 4136:2012 | Destructive tests on welds in metallic materials Transverse tensile test |
| ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test |
| ISO 2409:2013 | Paints and varnishes Cross-cut test |
| EN ISO 17636-1:2013 | Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013) |
| EN 14717:2005 | Welding and allied processes - Environmental check list |
| EN ISO 9606-1:2017 | Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) |
| EN ISO 15995:2010 | Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated (ISO 15995:2006) |
| ISO 11117:2008 | Gas cylinders Valve protection caps and valve guards Design, construction and tests |
| ISO 3231:1993 | Paints and varnishes — Determination of resistance to humid atmospheres containing sulfur dioxide |
| EN ISO 14245:2010 | Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing (ISO 14245:2006) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.