UNE-EN 16726:2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Gas infrastructure - Quality of gas - Group H
Available format(s)
Hardcopy , PDF
Superseded date
10-04-2019
Superseded by
Language(s)
Spanish, Castilian, English
Published date
07-09-2016
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
This European standard specifies gas quality characteristics, parameters and their limits, for gases classified as group H that are to be transmitted, injected into and from storages, distributed and utilized.
| Committee |
CTN 60
|
| DocumentType |
Standard
|
| Pages |
48
|
| PublisherName |
Asociacion Espanola de Normalizacion
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| EN 16726:2015 | Identical |
| ISO 10715:1997 | Natural gas — Sampling guidelines |
| EN ISO 6974-6:2005 | Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns (ISO 6974-6:2002) |
| EN ISO 6326-1:2009 | Natural gas - Determination of sulfur compounds - Part 1: General introduction (ISO 6326-1:2007) |
| EN ISO 13443:2005 | Natural gas - Standard reference conditions (ISO 13443:1996 including Corrigendum 1:1997) |
| ISO 6974-6:2002 | Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns |
| ISO 6976:2016 | Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition |
| ISO 15971:2008 | Natural gas Measurement of properties Calorific value and Wobbe index |
| ISO 6327:1981 | Gas analysis — Determination of the water dew point of natural gas — Cooled surface condensation hygrometers |
| EN ISO 6327:2008 | Gas analysis - Determination of the water dew point of natural gas - Cooled surface condensation hygrometers (ISO 6327:1981) |
| EN ISO 6570:2004 | Natural gas - Determination of potential hydrocarbon liquid content - Gravimetric methods (ISO 6570:2001) |
| EN ISO 18453:2005 | Natural gas - Correlation between water content and water dew point (ISO 18453:2004) |
| ISO 6974-4:2000 | Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns |
| EN ISO 10101-1:1998 | Natural gas - Determination of water by the Karl Fischer method - Part 1: Introduction (ISO 10101-1:1993) |
| EN ISO 6326-5:1997 | Natural gas - Determination of sulfur compounds - Part 5: Lingener combustion method (ISO 6326-5:1989) |
| EN 1594:2013 | Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements |
| EN ISO 6974-5:2014 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 5: Isothermal method for nitrogen, carbon dioxide, C1 to C5 hydrocarbons and C6+ hydrocarbons (ISO 6974-5:2014) |
| ISO/TR 12148:2009 | Natural gas — Calibration of chilled mirror type instruments for hydrocarbon dewpoint (liquid formation) |
| ISO 6975:1997 | Natural gas — Extended analysis — Gas-chromatographic method |
| ISO 6974-3:2000 | Natural gas Determination of composition with defined uncertainty by gas chromatography Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns |
| ISO 10101-1:1993 | Natural gas — Determination of water by the Karl Fischer method — Part 1: Introduction |
| EN ISO 10101-2:1998 | Natural gas - Determination of water by the Karl Fischer method - Part 2: Titration procedure (ISO 10101-2:1993) |
| EN ISO 15971:2014 | Natural gas - Measurement of properties - Calorific value and Wobbe index (ISO 15971:2008) |
| ISO 15970:2008 | Natural gas Measurement of properties Volumetric properties: density, pressure, temperature and compression factor |
| EN 437:2003+A1:2009 | Test gases - Test pressures - Appliance categories |
| ISO 14532:2014 | Natural gas — Vocabulary |
| EN ISO 6974-2:2012 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012) |
| ISO 10101-2:1993 | Natural gas — Determination of water by the Karl Fischer method — Part 2: Titration procedure |
| ISO 13443:1996 | Natural gas Standard reference conditions |
| ISO 10101-3:1993 | Natural gas — Determination of water by the Karl Fischer method — Part 3: Coulometric procedure |
| EN ISO 6326-3:1997 | Natural gas - Determination of sulfur compounds - Part 3: Determination of hydrogen sulfide, mercaptan sulfur and carbonyl sulfide sulfur by potentiometry (ISO 6326-3:1989) |
| ISO 6326-1:2007 | Natural gas Determination of sulfur compounds Part 1: General introduction |
| ISO 14912:2003 | Gas analysis — Conversion of gas mixture composition data |
| EN ISO 14532:2017 | Natural gas - Vocabulary (ISO 14532:2014) |
| ISO 23874:2006 | Natural gas Gas chromatographic requirements for hydrocarbon dewpoint calculation |
| EN ISO 6975:2005 | Natural gas - Extended analysis - Gas-chromatographic method (ISO 6975:1997) |
| ISO 12213-1:2006 | Natural gas Calculation of compression factor Part 1: Introduction and guidelines |
| EN ISO 6974-4:2001 | Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns (ISO 6974-4:2000) |
| ISO 6326-5:1989 | Natural gas Determination of sulfur compounds Part 5: Lingener combustion method |
| EN ISO 6976:2016 | Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016) |
| EN ISO 10715:2000 | Natural gas - Sampling guidelines (ISO 10715:1997) |
| ISO 6326-3:1989 | Natural gas Determination of sulfur compounds Part 3: Determination of hydrogen sulfide, mercaptan sulfur and carbonyl sulfide sulfur by potentiometry |
| EN ISO 12213-1:2009 | Natural gas - Calculation of compression factor - Part 1: Introduction and guidelines (ISO 12213-1:2006) |
| ISO 19739:2004 | Natural gas — Determination of sulfur compounds using gas chromatography |
| ISO 18453:2004 | Natural gas — Correlation between water content and water dew point |
| ISO 6570:2001 | Natural gas — Determination of potential hydrocarbon liquid content — Gravimetric methods |
| EN ISO 10101-3:1998 | Natural gas - Determination of water by the Karl Fischer method - Part 3: Coulometric procedure (ISO 10101-3:1993) |
| EN ISO 15970:2014 | Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.