UNE-EN 1396:2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
Hardcopy , PDF
20-12-2023
Spanish, Castilian, English
09-09-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
3.1 Aluminium
3.2 Aluminium alloy
3.3 Metal substrate
3.4 Coating material
3.5 Coil coating
3.6 Organic coating
3.7 Top side
3.8 Reverse side
3.9 Coating system
3.10 Single coat system
3.11 Multiple coat system
3.12 Backing coat
3.13 Film coating
3.14 Master coil
4 Technical conditions for inspection and delivery
4.1 Orders and tenders
4.2 Requirements
4.3 Test procedures
5 Mechanical properties
6 Organic coating properties
6.1 Tolerances on thickness
6.2 Tolerances on gloss
6.3 Tolerances on colour
7 Inspection documents
8 Marking
9 Packing
10 Arbitration tests
Annexes
A (normative) Rules for rounding
B (informative) Examples of coating systems
C (informative) Guidelines for the specification of organic
coating requirements
D (informative) Guidelines for storage and subsequent
processing
This European Standard specifies the particular requirements for wrought aluminium and wrought aluminium alloys in the form of coil coated sheet and strip for general applications.
| Committee |
CTN 38
|
| DocumentType |
Standard
|
| Pages |
34
|
| PublisherName |
Asociacion Espanola de Normalizacion
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN 1396 : 2015 | Identical |
| NF EN 1396 : 2015 | Identical |
| NBN EN 1396 : 2015 | Identical |
| NEN EN 1396 : 2015 | Identical |
| NS EN 1396 : 1996 | Identical |
| I.S. EN 1396:2015 | Identical |
| SN EN 1396 : 2015 | Identical |
| UNI EN 1396 : 2007 | Identical |
| BS EN 1396:2007 | Identical |
| EN 1396:2015 | Identical |
| DIN EN 1396:2015-06 | Identical |
| EN ISO 4628-2:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016) |
| EN 485-1:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
| ISO 6272-2:2011 | Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 2: Falling-weight test, small-area indenter |
| EN 13523-10:2017 | Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| EN 13523-6:2002 | Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test) |
| ISO 4623-2:2016 | Paints and varnishes Determination of resistance to filiform corrosion Part 2: Aluminium substrates |
| ISO 6270-1:1998 | Paints and varnishes Determination of resistance to humidity Part 1: Continuous condensation |
| EN 485-4:1993 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products |
| ASTM D 660 : 1993 | Standard Test Method for Evaluating Degree of Checking of Exterior Paints |
| ISO 1520:2006 | Paints and varnishes Cupping test |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN 13523-3:2014 | Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison |
| EN ISO 7253 : 2001 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG) |
| EN ISO 4628-4:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016) |
| EN 13523-21:2017 | Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels |
| ISO 4628-4:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 4: Assessment of degree of cracking |
| EN 12258-1:2012 | Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms |
| ISO 7253:1996 | Paints and varnishes — Determination of resistance to neutral salt spray (fog) |
| EN 13523-22:2017 | Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison |
| ISO 4628-5:2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking |
| EN 541:2006 | Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications |
| EN ISO 4628-6:2011 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2011) |
| EN 3665:1997 | Aerospace series - Test methods for paints and varnishes - Filiform corrosion resistance test on aluminium alloys |
| EN 515:2017 | Aluminium and aluminium alloys - Wrought products - Temper designations |
| EN ISO 1520:2006 | Paints and varnishes - Cupping test (ISO 1520:2006) |
| EN 13523-19:2011 | Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing |
| EN 13523-8:2017 | Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog) |
| ISO 6272-1:2011 | Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter |
| EN 13523-7:2014 | Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test) |
| EN 13523-1:2017 | Coil coated metals - Test methods - Part 1: Film thickness |
| ISO 4628-6:2011 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method |
| ISO 1519:2011 | Paints and varnishes Bend test (cylindrical mandrel) |
| EN ISO 6272-2:2011 | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011) |
| EN ISO 1519:2011 | Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011) |
| EN ISO 4628-5:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016) |
| EN 13523-4:2014 | Coil coated metals - Test methods - Part 4: Pencil hardness |
| EN 13523-2:2014 | Coil coated metals - Test methods - Part 2: Gloss |
| ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
| EN 573-3:2013 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
| EN ISO 6272-1:2011 | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011) |
| ISO 4628-2:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.