UNE 53008-1:2014
Current
Current
The latest, up-to-date edition.
Plastics piping systems. Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa). Part 1: Specifications for pipes, fittings and the system
Available format(s)
Hardcopy , PDF
Language(s)
Spanish, Castilian, English
Published date
10-09-2014
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
CTN 53/SC 2
|
| DocumentType |
Standard
|
| Pages |
45
|
| PublisherName |
Asociacion Espanola de Normalizacion
|
| Status |
Current
|
| UNE 53008-2:2016 | Plastics piping systems. Multilayer pipe systems for gas installations pipework with a maximum operating pressure up to and including 5 bar (500 kPa). Part 2: Design, installation and maintenance |
| ISO 17484-2:2009 | Plastics piping systems — Multilayer pipe systems for indoor gas installations — Part 2: Code of pratice |
| ISO 17484-1:2014 | Plastics piping systems — Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) — Part 1: Specifications for systems |
| UNE-EN 437:2003 | Test gases - Test pressures - Appliance categories |
| UNE-EN ISO 1167-1:2006 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006) |
| UNE-EN ISO 3126:2005 | Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005) |
| UNE-EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
| ISO 10838-3:2001 | Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels Part 3: Thermoplastics fittings for pipes of nominal outside diameter less than or equal to 63 mm |
| UNE-ISO 17454:2007 | Plastics piping systems. Multilayer pipes. Test method for the adhesion of the different layers using a pulling rig. (ISO 17454:2006) |
| UNE-EN 12165:2017 | Copper and copper alloys - Wrought and unwrought forging stock |
| ISO 10838-1:2000 | Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels Part 1: Metal fittings for pipes of nominal outside diameter less than or equal to 63 mm |
| UNE-EN 10088-1:2015 | Stainless steels - Part 1: List of stainless steels |
| UNE-EN ISO 11357-6:2013 | Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2008) |
| ISO 18553:2002 | Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds |
| UNE-EN ISO 9080:2013 | Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2012) |
| UNE-EN 10226-1:2004 | Pipe threads where pressure tight joints are made on the threads. Part 1: Taper external threads and parellel internal threads. Dimensions, tolerances and designation. |
| UNE-EN 1982:2009 | Copper and copper alloys - Ingots and castings |
| UNE-EN 682:2002 | Elastomeric Seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids. |
| UNE-EN ISO 1167-2:2006 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006) |
| UNE-EN 12164:2017 | Copper and copper alloys - Rod for free machining purposes |
| PREN 1254-8 : DRAFT 2011 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 8: FITTINGS WITH PRESS ENDS FOR USE WITH PLASTICS AND MULTILAYER PIPES |
| UNE-EN 549:1996 | Rubber materials for seals and diaphragms for gas appliances and gas equipment |
| UNE-EN 12117:1998 | PLASTICS PIPING SYSTEMS. FITTINGS, VALVES AND ANCILLARIES. DETERMINATION OF GASEOUS FLOW RATE/PRESSURE DROP RELATIONSHIPS. |
| UNE-EN 712:1994 | THERMOPLASTICS PIPING SYSTEMS. END-LOAD BEARING MECHANICAL JOINTS BETWEEN PRESSURE PIPES AND FITTINGS. TEST METHOD FOR RESISTANCE TO PULL-OUT UNDER CONSTANT LONGITUDINAL FORCE. |
| UNE-EN 713:1994 | PLASTICS PIPING SYSTEMS. MECHANICAL JOINTS BETWEEN FITTINGS AND POLYOLEFIN PRESSURE PIPES. TEST METHOD FOR LEAKTIGHTNESS UNDER INTERNAL PRESSURE OF ASSEMBLIES SUBJECTED TO BENDING. |
| UNE-EN 1254-4:1999 | COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 4: FITTINGS COMBININg other end connections with capillary or compression ends. |
| UNE-EN 1254-3:1999 | COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 3: FITTINGS WITH COMPRESSION ENDS FOR USE WITH PLASTIC PIPES. |
| UNE-EN ISO 1456:2010 | Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium (ISO 1456:2009) |
| UNE-EN 12449:2016 | Copper and copper alloys - Seamless, round tubes for general purposes |
| UNE-ISO 5893:2012 | Rubber and plastics test equipment. Tensile, flexural and compression types (constant rate of traverse). Specification. |
| UNE-EN 573-3:2014 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.