SN EN 14035-22 : 2004

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Construction
  4.1 Means of ignition
  4.2 Attachment of initial fuse
  4.3 Protection of initial fuse
      4.3.1 General
      4.3.2 Initial fuse protected by fuse cover
      4.3.3 Initial fuse protected by primary pack or
            selection pack
      4.3.4 Protruding fuse designed to resist side
            ignition
  4.4 Materials of firework case
  4.5 Integrity
      4.5.1 Firework case
      4.5.2 Mine
  4.6 Net explosive content
  4.7 Mass of report charge
  4.8 Vertical stability
5 Performance
  5.1 Initial fuse
  5.2 Invisible burning
  5.3 Principal effects
  5.4 Functioning
  5.5 Sound pressure level (if applicable)
  5.6 Burning matter
  5.7 Stability
  5.8 Integrity of the firework case after functioning
6 Primary pack or selection pack
7 Minimum labelling requirements
  7.1 General
  7.2 Type name and category
  7.3 Safety information
      7.3.1 General
      7.3.2 Category 2 mines
      7.3.3 Category 3 mines
      7.3.4 Placing instructions
  7.4 Name, address and telephone number of manufacturer
      or distributor or importer
  7.5 Reference to this standard
  7.6 Printing
      7.6.1 Labelling
      7.6.2 Type size
  7.7 Marking of very small mines
      7.7.1 Reduced type size
      7.7.2 Reduced information
  7.8 Additional information on the primary pack (if
      applicable)
8 Test methods
  8.1 Attachment of protruding fuse (type test and batch
      test)
      8.1.1 Apparatus
      8.1.2 Procedure
  8.2 Attachment of ignition head (type and batch test)
      8.2.1 Apparatus
      8.2.2 Procedure
  8.3 Vertical stability test (type test)
      8.3.1 Apparatus
      8.3.2 Procedure
  8.4 Performance (type test and batch test)
      8.4.1 Test environment
      8.4.2 Apparatus
      8.4.3 Procedure
  8.5 Determination of net explosive content (type test)
      8.5.1 Apparatus
      8.5.2 Procedure
  8.6 Side ignition of initial fuse (type test)
      8.6.1 Material
      8.6.2 Test area
      8.6.3 Apparatus
      8.6.4 Test specimen
      8.6.5 Procedure
  8.7 Labelling (type test and batch test)
Annex A (normative) Type testing
  A.1 General
  A.2 Number of mines to be tested
  A.3 Loose pyrotechnic composition
  A.4 Thermal conditioning
  A.5 Mechanical conditioning
      A.5.1 Apparatus
      A.5.2 Procedure
  A.6 Number of primary packs to be examined
  A.7 Test report
Annex B (normative) Batch testing
  B.1 General
  B.2 Sampling plans
  B.3 Unit of product
  B.4 Nonconformities
  B.5 Test report
  B.6 Acceptance or rejection of a batch
      B.6.1 Nonconforming units
      B.6.2 Critical nonconforming units
      B.6.3 Major nonconforming units
      B.6.4 Minor nonconforming units
      B.6.5 Mines supplied in primary packs
Annex C (normative) Method for determination of smouldering
        rate of cigarette
Annex D (informative) A-Deviations

Covers requirements for the construction, performance, primary packaging and labelling of mines and the corresponding test methods.