SAE J 533 : 2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
FLARES FOR TUBING
Available format(s)
Hardcopy , PDF
Superseded date
29-05-2020
Superseded by
Language(s)
English
Published date
08-02-2017
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. REFERENCES
3. GENERAL SPECIFICATIONS
4. PERFORMANCE REQUIREMENT
5. NOTES
Describes specifications and performance requirements for 37 degrees and 45 degrees single and double flares for tube ends intended for use with SAE J512, SAE J513, SAE J514, and ISO 8434-2 connectors.
| DocumentType |
Revision
|
| Pages |
10
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ANSI B93.11M : 1981 | SEAMLESS LOW CARBON STEEL HYDRAULIC LINE TUBING, |
| ASTM A 254/A254M : 2012 : REDLINE | Standard Specification for Copper-Brazed Steel Tubing |
| SAE J 2593 : 2015 | INFORMATION REPORT FOR THE INSTALLATION OF FLUID CONDUCTORS AND CONNECTORS |
| NFPA 1192 : 2018 | RECREATIONAL VEHICLES |
| NFPA 54 : 2018 | NATIONAL FUEL GAS CODE |
| ANSI Z223.1 : 2018 | NATIONAL FUEL GAS CODE |
| SAE J 1650 : 2011 | SEAMLESS COPPER-NICKEL 90-10 TUBING |
| ASTM A 254 : 1997 : R2007 | Standard Specification for Copper-Brazed Steel Tubing |
| SAE J 2551/2 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 2: GENERAL SPECIFICATIONS AND PERFORMANCE REQUIREMENTS |
| SAE J 514 : 2012 | HYDRAULIC TUBE FITTINGS |
| SAE J 524 : 2016 | SEAMLESS LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING |
| NFPA 501C : 1996 | RECREATIONAL VEHICLES |
| ASTM A 254 : 1997 : R2002 | Standard Specification for Copper-Brazed Steel Tubing |
| SAE J 2467 : 2015 | WELDED AND COLD-DRAWN, SAE 1021 CARBON STEEL TUBING NORMALIZED FOR BENDING AND FLARING |
| SAE J 1290 : 2012 | AUTOMOTIVE HYDRAULIC BRAKE SYSTEM - METRIC TUBE CONNECTIONS |
| ASTM B 469 : 1994 | Standard Specification for Seamless Copper-Alloy Tubes for Pressure Applications (Withdrawn 2000) |
| SAE J 527 : 2017 | BRAZED DOUBLE WALL LOW-CARBON STEEL TUBING |
| SAE J 525 : 2016 | WELDED AND COLD DRAWN LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING |
| SAE J 2435 : 2015 | WELDED FLASH CONTROLLED, SAE 1021 CARBON STEEL TUBING, NORMALIZED FOR COLD FORMING, WELDING AND BRAZING |
| SAE J 2467 : 2020 | WELDED AND COLD-DRAWN, SAE 1021 CARBON STEEL TUBING NORMALIZED FOR BENDING AND FLARING |
| I.S. 808:2002 | SPECIFICATION FOR CNG FUELLED VEHICLES |
| ASTM A 254 : 1997 | Standard Specification for Copper-Brazed Steel Tubing |
| SAE J 356 : 2013 | WELDED FLASH-CONTROLLED LOW-CARBON STEEL TUBING NORMALIZED FOR BENDING, DOUBLE FLARING, AND BEADING |
| SAE J 1065 : 2016 | NOMINAL REFERENCE WORKING PRESSURES FOR STEEL HYDRAULIC TUBING |
| SAE J 2551 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON AND ALLOY STEEL TUBING APPLICATIONS |
| SAE J 2551/1 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 1: DESIGN AND FABRICATION |
| SAE J 2551/3 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 3: PROCUREMENT |
| SAE J 1677 : 2016 | TESTS AND PROCEDURES FOR CARBON STEEL AND HIGH STRENGTH LOW ALLOY STEEL TUBING |
| SAE J512 : 1997(R2017) | AUTOMOTIVE TUBE FITTINGS |
| SAE J 513 : 1999 | REFRIGERATION TUBE FITTINGS - GENERAL SPECIFICATIONS |
| SAE J 2613 : 2017 | WELDED FLASH CONTROLLED, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, DOUBLE FLARING, COLD FORMING, WELDING, AND BRAZING |
| SAE J 2614 : 2018 | WELDED AND COLD-DRAWN, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, FLARING, COLD FORMING, WELDING AND BRAZING |
| SAE AS 4775 : 2017 | AIRCRAFT MAINTENANCE JACKS - GENERAL REQUIREMENTS |
| SAE J 526 : 2016 | WELDED LOW-CARBON STEEL TUBING SUITABLE FOR BENDING, FLARING, BEADING, FORMING AND BRAZING |
| SAE ARP 1247 : 2018 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS |
| ISO 5598:2008 | Fluid power systems and components Vocabulary |
| ASME Y14.5 : 2009 | DIMENSIONING AND TOLERANCING |
| ISO 4399:1995 | Fluid power systems and components Connectors and associated components Nominal pressures |
| SAE J 2879 : 2011 | AUTOMOTIVE HYDRAULIC BRAKE SYSTEM - METRIC HYDRAULIC TUBE CONNECTIONS FOR INVERTED FLARES |
| ISO 10583:1993 | Aerospace fluid systems — Test methods for tube/fitting assemblies |
| ISO 6605:2017 | Hydraulic fluid power — Test methods for hoses and hose assemblies |
| ISO 4397:2011 | Fluid power connectors and associated components — Nominal outside diameters of tubes and nominal hose sizes |
| SAE J 1290 : 2012 | AUTOMOTIVE HYDRAULIC BRAKE SYSTEM - METRIC TUBE CONNECTIONS |
| SAE J 2551/1 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 1: DESIGN AND FABRICATION |
| SAE J 513 : 1999 | REFRIGERATION TUBE FITTINGS - GENERAL SPECIFICATIONS |
| SAE J 1273 : 2014 | RECOMMENDED PRACTICES FOR HYDRAULIC HOSE ASSEMBLIES |
| SAE J 1065 : 2016 | NOMINAL REFERENCE WORKING PRESSURES FOR STEEL HYDRAULIC TUBING |
| SAE J 356 : 2013 | WELDED FLASH-CONTROLLED LOW-CARBON STEEL TUBING NORMALIZED FOR BENDING, DOUBLE FLARING, AND BEADING |
| ISO 8434-2:2007 | Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors |
| SAE J 2614 : 2009 | WELDED AND COLD-DRAWN, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, FLARING, COLD FORMING, WELDING AND BRAZING |
| ISO 19879:2010 | Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections |
| SAE J 2435 : 2015 | WELDED FLASH CONTROLLED, SAE 1021 CARBON STEEL TUBING, NORMALIZED FOR COLD FORMING, WELDING AND BRAZING |
| SAE J 514 : 2012 | HYDRAULIC TUBE FITTINGS |
| SAE J 526 : 2016 | WELDED LOW-CARBON STEEL TUBING SUITABLE FOR BENDING, FLARING, BEADING, FORMING AND BRAZING |
| SAE J 527 : 2013 | BRAZED DOUBLE WALL LOW-CARBON STEEL TUBING |
| SAE J 525 : 2016 | WELDED AND COLD DRAWN LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING |
| SAE J 1677 : 2016 | TESTS AND PROCEDURES FOR CARBON STEEL AND HIGH STRENGTH LOW ALLOY STEEL TUBING |
| SAE J 524 : 2016 | SEAMLESS LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING |
| ISO 10763:1994 | Hydraulic fluid power Plain-end, seamless and welded precision steel tubes Dimensions and nominal working pressures |
| SAE J 2467 : 2015 | WELDED AND COLD-DRAWN, SAE 1021 CARBON STEEL TUBING NORMALIZED FOR BENDING AND FLARING |
| SAE J 1176 : 2012 | EXTERNAL LEAKAGE CLASSIFICATIONS FOR HYDRAULIC SYSTEMS |
| SAE TSB 003 : 1999 | RULES FOR SAE USE OF SI (METRIC) UNITS |
| SAE J 2551/2 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 2: GENERAL SPECIFICATIONS AND PERFORMANCE REQUIREMENTS |
| ISO 2944:2000 | Fluid power systems and components — Nominal pressures |
| SAE J 2551/3 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 3: PROCUREMENT |
| ISO 13486-1:1999 | Road vehicles Hydraulic braking systems Part 1: Double-flare pipes, tapped holes, male fittings and tube seats |
| SAE J512 : 1997 | AUTOMOTIVE TUBE FITTINGS |
| SAE J 2613 : 2009 | WELDED FLASH CONTROLLED, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, DOUBLE FLARING, COLD FORMING, WELDING, AND BRAZING |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.