SAE AS 8879 : 2004
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER
Superseded date
03-01-2016
Superseded by
Published date
01-01-2004
Publisher
Sorry this product is not available in your region.
| DocumentType |
Standard
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| MIL-DTL-32460-3 Base Document:2013 | FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE |
| MIL-DTL-32480-1 Base Document:2014 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless Male to ORFS Male |
| BS EN 6092:2016 | Aerospace series. Receptacle, floating, double lug |
| MS28780 Revision F:2007 | Fitting End, 45 Degrees Elbow, Attachable, Hydraulic, High Pressure Hose 3000 PSI, Flared Tube |
| MIL-DTL-32480-5 Base Document:2014 | Fitting, Adapter, 45 Degrees Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Bulkhead |
| MIL-DTL-32371-4 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Tee, Spherical on Branch |
| MS21959 Revision D:2011 | Body,Cluster Fitting, Two-Way, 90 Degrees, Internal Boss |
| MIL-DTL-32464-6 Base Document:2013 | Male Adapted, Union Cross, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 37 Degrees Spherical on Branch, 1500-3000 PSI |
| MIL-DTL-32480 Base Document:2014 | Adapter, Hydraulic and Pneumatic, Flareless Tube Fitting to ORFS Connectors, 1500 to 3000 PSI and Minus 65 Degrees Fahrenheit to Plus 250 Degrees Fahrenheit, General Specification for |
| MIL-DTL-8783 Revision D:2009 | Clamp, Hose, Flat Band 500 Degrees F, General Specification for |
| MIL-DTL-27422 Revision F:2014 | TANK, FUEL, CRASH-RESISTANT, BALLISTIC-TOLERANT, AIRCRAFT |
| SAE AS 4892 : 2012 | INSERT, SCREW THREAD, SELF-LOCKING, UNS S66286, LOCKED IN, KEY LOCKED, PROCUREMENT SPECIFICATION FOR |
| MIL-DTL-32464-12 Base Document:2013 | Male Adapter, Tee, 37 Degrees Spherical to ANPT, ANPT on Branch, 1500-3000 PSI |
| SAE AS 4841 : 2017 | FITTINGS, 37 DEGREES INTERNAL FLARE, FLUID CONNECTION, PROCUREMENT SPECIFICATION |
| MIL-DTL-32464-1 Base Document:2013 | Male Adapter, Straight, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| SAE AS 4073 : 2013(R2018) | AIR CYCLE AIR CONDITIONING SYSTEMS FOR MILITARY AIR VEHICLES |
| MS28781 Revision E:2007 | Fitting End, 90 Degrees Elbow, Attachable, Hydraulic, High Pressure Hose 3000 PSI, Flared Tube |
| MIL-DTL-32480-6 Base Document:2014 | Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS Bulkhead |
| MS21958 Revision D:2011 | Body, Cluster Fitting, Two-Way, 180 Degrees, Internal Boss |
| AN849 Revision 13:2015 | NIPPLE, HOSE |
| AN838 Revision 9:2011 | Elbow, Tube to Hose, 90 Degrees |
| MIL-DTL-32371-3 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 90 Degrees Elbow |
| MIL-DTL-32371-6 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Nipple Tube, Regular Hex, Long |
| AN815 Revision 10:2015 | UNION - FLARED TUBE |
| MS24356 Revision E:2016 | NOZZLE - TYPE MA-2, FLIGHT PRESSURE REFUELING |
| AN924 Revision 14:2018 | NUT, TUBE, BULKHEAD AND UNIVERSAL FITTING |
| SAE AS 7452 : 2014 | BOLTS AND SCREWS, STEEL, LOW ALLOY HEAT TREATED, ROLL THREADED |
| AN846 Revision 9:2013 | ELBOW, HOSE, 45 DEGREES |
| MIL-DTL-32480-7 Base Document:2014 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel |
| AN818 Revision 20:2010 | NUT, TUBE COUPLING, SHORT |
| SAE AS 7466 : 2014 | BOLTS AND SCREWS, NICKEL ALLOY, UNS N07718, TENSILE STRENGTH 185 KSI, FATIGUE RATED, PROCUREMENT SPECIFICATION |
| SAE AS 85049 : 2016 | CONNECTOR ACCESSORIES, ELECTRICAL GENERAL SPECIFICATION FOR |
| MIL-DTL-32371-9 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Tee, Bulkhead, Spherical on Run |
| MIL-DTL-27193 Revision D:2017 | INDICATOR, ATTITUDE ARU-2B/A |
| SAE AS 1895 : 2016 | COUPLING ASSEMBLY, V-RETAINER, HIGH PRESSURE, HIGH TEMPERATURE, PNEUMATIC TUBE |
| SAE AS 39901 : 2012 | BEARINGS, ROLLER, NEEDLE, AIRFRAME, ANTIFRICTION, INCH |
| SAE ARP 4945 : 2013 | AEROSPACE-SOLENOID VALVE, HYDRAULIC, THREE WAY, TWO POSITION, DIRECT ACTING |
| PREN 4835 : DRAFT 2017 | AEROSPACE SERIES - INSTALLATION AND REMOVAL REQUIREMENTS FOR RING LOCKED FITTING AND REDUCER, 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) - INCH SERIES |
| PREN 6093 : 200P1 | AEROSPACE SERIES - RECEPTACLE, FLOATING, SINGLE LUG |
| SAE AS 4751 : 2005 | COUPLING ASSEMBLY, V-BAND SHEET METAL WIDE FLANGE, PNEUMATIC TUBE |
| SAE AS 7473 : 2018 | BOLTS AND SCREWS, ROLL THREADED PROCUREMENT SPECIFICATION FOR |
| SAE AS 38404 : 2013 | COUPLINGS, HOSE, REATTACHABLE SCREW-ON |
| SAE AS 85421 : 2015 | FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, BEAM SEAL, 3000/4000 PSI, GENERAL SPECIFICATION FOR |
| SAE AS 4108 : 2018 | T-BOLT AND EYE BOLT, A286 CRES, 1000 DEGREES F FATIGUE RATED |
| BS EN 6105:2016 | Aerospace series. Stud with shoulder |
| MS24357 Revision B:2016 | FLANGE, DROGUE CONE - TYPE MA-2 RECEPTION COUPLING, FLIGHT PRESSURE REFUELING, OUTLINE DIMENSIONS FOR |
| MIL-DTL-27272 Revision D:2015 | Fittings, Polytetrafluoroethylene Hose, High-Temperature, Medium-Pressure, General Specification for |
| MIL-DTL-32258 Base Document:2007 | NUT, SELF-LOCKING (RING TYPE NON-METALLIC INSERT), HEAVY HEX, CONTROLLED ROOT RADIUS, NICKEL-COPPER ALLOY |
| ASME B94.9 : 2008 : INC : ERR 1 : 2010 | TAPS: GROUND THREAD WITH CUT THREAD APPENDIX (INCH AND METRIC SIZES) |
| ASME B94.9 : 2008 | TAPS: GROUND THREAD WITH CUT THREAD APPENDIX (INCH AND METRIC SIZES) |
| MIL-DTL-5578 Revision D:2008 | TANKS, FUEL, AIRCRAFT, SELF-SEALING |
| MS8008 Revision D:2016 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PERMANENTLY ATTACHED FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLARELESS-TO-FLANGE |
| MIL-DTL-5523 Revision E:2011 | VALVE; RELIEF, HYDRAULIC PRESSURE |
| MIL-PRF-7115 Revision G:2012 | CONVERTERS, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-DTL-22263 Revision C:2009 | Coupling Fuel Line, Flexible, 125 PSI General Specification for |
| MIL-DTL-9395 Revision K:2016 | Switches, Pressure (Absolute, Gage and Differential) General Specification for |
| ASME B94.9 : 2008 : R2013 | TAPS: GROUND THREAD WITH CUT THREAD APPENDIX (INCH AND METRIC SIZES) |
| MIL-DTL-25579 Revision H:2014 | Hose Assembly, Polytetrafluoroethylene, High Temperature, Medium Pressure, General Specification for |
| MS8006 Revision D:2016 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PERMANENTLY ATTACHED FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLARELESS-TO-FLARELESS |
| MIL-DTL-32460-8 Base Document:2013 | FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL |
| MIL-DTL-83454 Revision B:2016 | TERMINALS, STUD, BLIND PLATE, FOR ELECTRICAL BONDING AND GROUNDING (NONINSULATED) |
| MIL-DTL-32464-7 Base Document:2013 | Male Adapter, 45 Degrees Elbow, Bulkhead, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| SAE AIR 4543/1A : 2017 | AEROSPACE HYDRAULICS AND ACTUATION LESSONS LEARNED |
| 10/30227763 DC : 0 | BS EN 6114 - AEROSPACE SERIES - BOLT, COUNTERSUNK HEAD, SHORT THREAD - INCH SERIES |
| MIL-DTL-32464-2 Base Document:2013 | Male Adapter, 45 Degrees Elbow, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| A-A-59935 Base Document:2013 | Conical Seal, Crush, 37 Degree Flared Tube Fitting, General Requirements for |
| MIL-DTL-32464-4 Base Document:2013 | Male Adapter, Tee, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 37 Degrees Spherical on Branch, 1500-3000 PSI |
| MIL-DTL-83296 Revision B:2009 | Fittings, Corrosion Resistant Steel, High Temperature, High Pressure (3000 PSI), Hydraulic and Pneumatic, General Specification for |
| SAE AS 8952 : 2005 | BEARINGS, ROLLER, ROD END, ANTIFRICTION SELF-ALIGNING |
| MIL-DTL-32464-8 Base Document:2013 | Male Adapter, 90 Degrees Elbow, Bulkhead, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| MS8009 Revision D:2016 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PERMANENTLY ATTACHED FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLANGE-TO-FLANGE |
| SAE AS 5878 : 2013 | NUT, SELF-LOCKING, NICKEL ALLOY, UNS N07001, 1400 DEGREES F, 180,000 PSI, UNJ THREAD PROCUREMENT SPECIFICATION |
| AN807 Revision 7:2007 | Adapter, Straight, Tube to Hose |
| MIL-DTL-32480-3 Base Document:2014 | Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Male |
| MIL-PRF-18148-3 Base Document:2011 | RECEPTACLES, ELECTRIC, AIRCRAFT STORAGE BATTERY |
| MIL-DTL-32464 Revision A:2017 | FITTINGS, ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES SPHERICAL TO ANPT CONNECTORS, 1500 TO 3000 PSI, GENERAL SPECIFICATION FOR |
| MIL-DTL-32464-10 Base Document:2013 | Male Adapter, Long, Nipple Tube, Hydraulic and Pneumatic Tube, Long Hex, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| FAA AC 21-41 : A | REPLACING MIL-S-8879C WITH SAE AS8879 |
| MS27624 Revision B:2009 | UNION, NIPPLE |
| SAE AS 7253 : 2015 | NUTS, SELF-LOCKING, NICKEL ALLOY, UNS N07001 CLASSIFICATION: 180 KSI/1400 DEGREES F, PROCUREMENT SPECIFICATION |
| MIL-DTL-32371 Base Document:2012 | Fittings, Adapter, Hydraulic and Pneumatic, Spherical to ORFS Connectors, 1500 to 3000 PSI, General Specification for |
| SAE AS 5960 : 2013 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC BRAID REINFORCED, 5080 PSI (35000 KPA), 400 DEGREES F (204 DEGREES C), AIRCRAFT HYDRAULIC SYSTEMS |
| SAE ARP 5812 : 2017 | ACTUATORS, LINEAR MECHANICAL, GENERAL SPECIFICATION GUIDE |
| MIL-DTL-32460-5 Base Document:2013 | FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD |
| MIL-DTL-32460-7 Base Document:2013 | FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL |
| MS27611 Revision H:2018 | VALVE, HYDRAULIC BLEEDER, AIRCRAFT WHEEL BRAKE |
| MIL-DTL-32464-5 Base Document:2013 | Male, Adapter, Nipple Tube, Hydraulic and Pneumatic, Regular Hex, 37 Degrees Spherical to NPTF, 1500-3000 PSI |
| SAE AS 620 : 2012 | HOSE ASSEMBLIES, CONVOLUTED POLYTETRAFLUOROETHYLENE METALLIC REINFORCED, HIGH TEMPERATURE, MEDIUM PRESSURE, AIRCRAFT |
| SAE AS 7474 : 2018 | BOLTS AND SCREWS, STEEL, CORROSION RESISTANT, UNS S17400 TENSILE STRENGTH 140 KSI PROCUREMENT SPECIFICATION |
| SAE AS7283B : 2012 | GASKETS, TYPE 20 ENGINE ACCESSORY DRIVE CORROSION RESISTANT STEEL SCREEN REINFORCED CONTROLLED PERFORMANCE |
| I.S. EN 6105:2016 | AEROSPACE SERIES - STUD WITH SHOULDER |
| SAE AS 18280 : 2017 | FITTINGS, 24 DEGREES CONE FLARELESS, FLUID CONNECTION, 3000 PSI |
| SAE AS 6019 : 2012 | ARC FAULT CIRCUIT BREAKER (AFCB), AIRCRAFT, TRIP-FREE 28 VDC |
| SAE AS 1132 : 2016 | BOLTS, SCREWS AND NUTS - EXTERNAL WRENCHING UNJ THREAD, INCH - DESIGN STANDARD |
| SAE AS 7472 : 2015 | BOLTS AND SCREWS, STEEL, CORROSION RESISTANT 125000 PSI TENSILE STRENGTH ROLL THREADED |
| SAE AS 1975 : 2016 | Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000/4000 psi, 275 °F, Standard Duty, Hydraulic, Aircraft Systems |
| SAE AS 683 : 2012 | INSTALLATION PROCEDURES AND TORQUES FOR FLUID CONNECTIONS |
| SAE AS 614 : 2017 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 4000 PSI, 400 DEGREES F, HEAVY DUTY, HYDRAULIC AND PNEUMATIC |
| SAE AS 7458 : 2016 | STUDS, STEEL, LOW ALLOY, HEAT RESISTANT NORMALIZED AND TEMPERED, ROLL THREADED 135000 PSI TENSILE STRENGTH |
| MIL-DTL-45932 Revision A:2015 | INSERT, SCREW THREAD, THIN WALL, LOCKED IN: GENERAL SPECIFICATION FOR |
| SAEITC TS220-1 | TS220 Technical Specification for Self Locking Union Nuts (Unified Threads) Manufactured from INCO718 Material.1270 MPa (185000 lbf/in2) Minimum Tensile Strength at Room Temperature |
| MIL-PRF-81975 Revision C:2008 | COUPLINGS, REGULATED, AERIAL PRESSURE REFUELING TYPE MA-2, TYPE MA-3 AND TYPE MA-4 |
| MIL-DTL-7601 Revision C:2011 | GAGE, EMERGENCY OXYGEN, TYPE L-2 |
| MIL-DTL-32434-7 Base Document:2013 | Hose Assembly, Polytetrafluoroethylene, Convoluted, Permanently Attached Fittings, High Temperature, Medium Pressure, Flareless-to-Flareless |
| MS21953 Revision C:2015 | BODY, CLUSTER FITTING, ONE-WAY, FLARE |
| MS21955 Revision C:2009 | BODY, CLUSTER FITTING, TWO-WAY, 180 DEGREES, FLARE |
| AN774 Revision 8:2011 | BOLT - FLARED TUBE FITTING END UNIVERSAL |
| MS20762 Revision D:2016 | ELBOW, FLARED TUBE, FLANGED, SWIVEL, 90 DEGREES |
| MIL-DTL-32460-1 Base Document:2013 | FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE |
| MIL-DTL-7899 Revision D:2014 | Valve, Check, Aircraft Fuel System |
| MIL-DTL-6396 Revision F:2008 | TANKS, FUEL, OIL, COOLING FLUIDS, INTERNAL, REMOVABLE NON-SELF-SEALING |
| SAE AS 7479 : 2013 | BOLTS AND SCREWS, STEEL, UNS S66286, 1650 DEGREES F SOLUTION HEAT TREATED, PRECIPITATION HEAT TREATED BEFORE ROLL THREADED |
| MS28760 Revision E:2007 | Fitting End, Straight, Attachable, Hydraulic and Pneumatic, High Pressure Hose 3000 PSI, Flared Tube |
| SAE AS 4891 : 1999 | STUD, LOCKED IN, KEY LOCKED, UNS S66286, CLASSIFICATION: 140 KSI PROCUREMENT SPECIFICATION FOR |
| MIL-PRF-64266 Revision B:2016 | CONNECTORS, FIBER OPTIC, CIRCULAR AND RECTANGULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE GENDERLESS TERMINI, ENVIRONMENT RESISTING GENERAL SPECIFICATION FOR |
| 10/30227764 DC : 0 | BS EN 6115 - AEROSPACE SERIES - BOLT - PROTRUDING HEAD, SHORT THREAD - INCH SERIES |
| MIL-DTL-83798 Revision D:2008 | FITTING, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
| MIL-DTL-32460-6 Base Document:2013 | FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD |
| MS27626 Revision B:2009 | NIPPLE, FLARED, TUBE TO HOSE-SWIVEL NUT |
| MS21954 Revision C:2015 | BODY, CLUSTER FITTING, TWO-WAY, 90 DEGREE, FLARE |
| AN775 Revision 14:2011 | BOLT - FLUID PASSAGE |
| MIL-DTL-32460 Revision A:2017 | ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE TUBE FITTING TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F, GENERAL SPECIFICATION FOR |
| MIL-DTL-32464-11 Base Document:2013 | Male Adapter, Bulkhead, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| MIL-DTL-32460-9 Base Document:2013 | FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL |
| MS9769 Revision B:2008 | REDUCER, TUBE - STRAIGHT, TUBE TO BOSS |
| MS27635 Revision C:2009 | NIPPLE, FLARELESS, TUBE TO HOSE, SWIVEL NUT |
| MIL-DTL-25677 Revision G:2016 | ADAPTER, CAP, AND NOZZLE, PRESSURE LUBRICATING OIL SERVICING, AIRCRAFT, GENERAL SPECIFICATION FOR |
| SAE AS 5528 : 2016 | LUBRICANT APPLICATION, SOLID FILM, HEAT CURED, CORROSION INHIBITING |
| PREN 6092 : 200P2 | AEROSPACE SERIES - RECEPTACLE, FLOATING, DOUBLE LUG |
| SAE AS 604 : 2012 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 3000 PSI, 400 DEGREES F, HEAVYWEIGHT, HYDRAULIC |
| MS24359 Revision B:2016 | NOSE, PROBE MAST - TYPE MA-2, FLIGHT PRESSURE REFUELING NOZZLE, OUTLINE DIMENSIONS FOR |
| MS21946 Revision F:2012 | Body, Cluster Fitting, One-Way, Internal Boss |
| SAE AS 5054 : 2012 | AREAS FOR CALCULATING STRESS OF LOAD VALUES FOR EXTERNALLY AND INTERNALLY THREADED FASTENERS |
| SAE AS 5270 : 2013 | BOLTS, SCREWS AND STUDS, NICKEL ALLOY, UNS N07718, WORK-STRENGTHENED, TENSILE STRENGTH 220 KSI, PROCUREMENT SPECIFICATION |
| SAE AS 7252 : 2015 | NUTS, SELF-LOCKING, STEEL HIGH STRENGTH, ALL METAL 450 DEGREES F USE, UN AND UNJ THREAD FORM |
| SAE AS 7459 : 2015 | BOLTS AND SCREWS, STEEL UNS K14675 TENSILE STRENGTH 195 KSI FATIGUE AND STRESS-RUPTURE RATED PROCUREMENT SPECIFICATION |
| SAE AIR 1471 : 2018 | TORQUE TIGHTENING THREADED FASTENERS |
| SAE AS 5000 : 2010 | FITTING, PLUG-IN UNION, RING LOCKED, 24 DEGREE CONE, FLUID CONNECTION, 5080 PSI (35000 KPA), SPECIFICATION FOR |
| SAE AS 7455 : 2016 | BOLTS AND SCREWS, STEEL, LOW ALLOY, HEAT RESISTANT HARDENED AND TEMPERED, ROLL THREADED |
| SAE AS 45909 : 2015 | STUD, LOCKED IN, RING LOCKED, SERRATED, GENERAL SPECIFICATION FOR |
| SAE ARP 4058 : 2017 | GENERAL SPECIFICATION GUIDE FOR MECHANICAL GEARED ROTARY ACTUATORS |
| SAE AMS 3376 : 2015 | SEALING COMPOUND, NON-CURING, FLUOROSILICONE GROOVE INJECTION TEMPERATURE AND FUEL RESISTANT |
| SAE AS 7251 : 2014 | NUTS, SELF-LOCKING, STEEL, CORROSION AND HEAT RESISTANT HIGH STRENGTH, ALL METAL 1200 DEGREES F USE, UNJ THREAD FORM |
| SAE AS 7471 : 2018 | BOLTS AND SCREWS, NICKEL ALLOY, UNS N07001 TENSILE STRENGTH 165 KSI, CORROSION AND HEAT RESISTANT, PROCUREMENT SPECIFICATION |
| SAE AS 4847 : 2018 | SHANK NUTS, CAPTIVE BLIND FASTENER, MATING RETAINING FLANGE, DESIGN STANDARD FOR |
| SAE AS 7461 : 2015 | BOLTS AND SCREWS, TITANIUM ALLOY, 6AL-4V, UNS R56400, FATIGUE-RATED, PROCUREMENT SPECIFICATION FOR |
| SAE AS 5887 : 2014 | INSERT, SCREW THREAD, SELF-LOCKING, UNS S66286, LOCKED IN, KEY LOCKED PROCUREMENT SPECIFICATION FOR |
| I.S. EN 6092:2016 | AEROSPACE SERIES - RECEPTACLE, FLOATING, DOUBLE LUG |
| SAE AS 5420 : 2017 | HOSE ASSEMBLY, HEATED, 125 PSIG, LINED SILICONE, POTABLE WATER, PROCUREMENT SPECIFICATION |
| SAE AS 4417A : 2014 | NUTS, SELF-LOCKING, ALLOY, CORROSION AND HEAT RESISTANT, HIGH STRENGTH, ALL METAL, SOLID FILM LUBRICATED, 1400 DEGREES F, PROCUREMENT SPECIFICATION |
| MIL-PRF-6164 Revision G:2012 | VALVE; AIRCRAFT, PNEUMATIC, HIGH-PRESSURE CHARGING |
| NASA MSFC STD 557 : 2012 | THREADED FASTENERS, TITANIUM ALLOYS, USAGE CRITERIA FOR LAUNCH VEHICLES AND SPACECRAFT APPLICATIONS |
| MIL-PRF-21480 Revision B:2010 | Generator System, Electric Power, 400 Hertz, Alternating Current, Aircraft; General Specification for |
| MIL-DTL-45910 Revision D:2015 | INSERT, SCREW THREAD-LOCKED IN AND RING LOCKED, SERRATED GENERAL SPECIFICATION FOR |
| MIL-HDBK-454 Revision B:2007 | GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
| MIL-PRF-57267 Base Document:2017 | COUPLING, AERIAL PRESSURE REFUELING TYPE MA-5 |
| MIL-DTL-9490 Revision E:2008 | FLIGHT CONTROL SYSTEMS - DESIGN, INSTALLATION AND TEST OF PILOTED AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-DTL-32480-2 Base Document:2014 | Fitting, Adapter, 45 Degree Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Male |
| MIL-DTL-32434 Base Document:2013 | Hose Assembly, Polytetrafluoroethylene, Convoluted, High Temperature, Medium Pressure, General Specification for |
| SAE ARP 1281 : 2002 | ACTUATORS: AIRCRAFT FLIGHT CONTROLS, POWER OPERATED, HYDRAULIC, GENERAL SPECIFICATION FOR |
| 14/30213839 DC : 0 | BS ISO 16130 - AEROSPACE SERIES - DYNAMIC TESTING OF THE LOCKING BEHAVIOUR OF BOLTED CONNECTIONS UNDER TRANSVERSE LOADING CONDITIONS (VIBRATION TEST) |
| MIL-DTL-38394 Revision E:2009 | Transmitter, Pressure TRU-81/A, Oil, 0-500 PSI |
| MS28761 Revision C:2007 | Fitting End, Straight, Attachable, Hydraulic, High Pressure Hose 3000 PSI, Flareless Tube |
| MIL-DTL-32480-8 Base Document:2014 | Fitting, Adapter, 45 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel |
| MIL-DTL-32460-4 Base Document:2013 | FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD |
| MIL-DTL-32434-8 Base Document:2013 | Hose, Assembly, Polytetrafluoroethylene, Convoluted, Permanently Attached Fittings, High Temperature, Medium Pressure, Flare-to-Flange |
| I.S. EN 6094:2016 | AEROSPACE SERIES - WASHER, SPRING, COUNTERSUNK |
| MIL-DTL-32464-3 Base Document:2013 | Male Adapter, 90 Degrees Elbow, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| MS27622 Revision C:2018 | Socket, Hose Coupling |
| SAE AS 4958 : 2013 | PERFORMANCE, NUT, SELF-LOCKING, CASTELLATED, PREVAILING TORQUE, UNJ 16 PITCH THREAD FORM |
| SAE AS 7478 : 2017 | BOLTS AND SCREWS, STEEL, UNS S66286, CLASSIFICATION: 130 KSI/1200 DEGREES F, 1800 DEGREES F SOLUTION HEAT TREATED, AGED AFTER ROLL THREADED, PROCUREMENT SPECIFICATION FOR |
| MIL-PRF-25435 Revision D:2008 | TRANSMITTERS, PRESSURE, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MS9198 Revision D:2010 | NUT, TUBE COUPLING-CRES SAE-AMS5646 |
| BS EN 6094:2016 | Aerospace series. Washer, spring, countersunk |
| MIL-PRF-7032 Revision H:2010 | INVERTERS, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-DTL-8789 Revision G:2015 | FITTING END, ATTACHABLE, HYDRAULIC, HIGH PRESSURE (3,000 PSI), GENERAL SPECIFICATION FOR |
| MIL-DTL-26666 Revision G:2006 | Hose Assembly, Pneumatic, High Pressure |
| AN848 Revision 13:2015 | Elbow, Hose, 90 Degree |
| SAE AS 4976 : 2012 | Insert, Screw Thread, Non-Locking, UNS S66286, Locked in, Key Locked, Procurement Specification for(STABILIZED Mar 2019) |
| MIL-DTL-32464-9 Base Document:2013 | Male Adapter, Tee, Bulkhead, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 37 Degrees Spherical on Run, 1500-3000 PSI |
| AN 839 : 0009 | ELBOW, TUBE TO HOSE, 45 DEGREES |
| MIL-DTL-32371-1 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Straight |
| SAE ARP 5794 : 2014 | CENTRIFUGAL AIRCRAFT FUEL PUMP REQUIREMENTS, DESIGN AND TESTING, AEROSPACE STANDARD |
| SAE AS 4723 : 2012 | INSERT, SCREW THREAD, SELF-LOCKING, UNS S66286, KEY LOCKED, PLASTIC SELF LOCKING DEVICE, SOLID FILM LUBRICANT, PROCUREMENT SPECIFICATION FOR |
| SAE AS 1576 : 2016 | FITTINGS, WELDED, HYDRAULIC, TITANIUM, CORROSION RESISTANT STEEL AND NICKEL, 3000 PSI HYDRAULIC |
| SAE AS 7475 : 2015 | BOLTS, COBALT-CHROMIUM-NICKEL ALLOY, UNS R30159, TENSILE STRENGTH 260 KSI, PROCUREMENT SPECIFICATION |
| SAE AS 17852 : 2012 | REDUCERS, OXYGEN PRESSURE |
| SAE AS 1229 : 2018 | INSERT, SCREW THREAD, HELICAL COIL, STUD LOCKING, PERFORMANCE STANDARD FOR |
| SAE AS 85720 : 2018 | FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE BEAM SEAL, 5000/8000 PSI, GENERAL SPECIFICATION FOR |
| SAE AS 5951 : 2017 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 5080 PSI (35,000 KPA), 275 DEGREES F (135 DEGREES C), AIRCRAFT HYDRAULIC SYSTEMS |
| SAE AS 4604 : 2003 | HOSE ASSEMBLY, 3000 PSI, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 400 DEGREES F, HEAVY DUTY, AIRCRAFT HYDRAULIC SYSTEMS |
| SAE AS 1339 : 2017 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 3000 PSI, 400 DEGREES F, LIGHTWEIGHT, HYDRAULIC AND PNEUMATIC |
| SAE AS 3506 B: 2014(R2019) | INSERT - SCREW THREAD, THIN WALL, SELF-LOCKING UNS N07718, SILVER PLATED, CLASS: 185 KSI/1025 DEGREES F, PROCUREMENT SPECIFICATION |
| SAE AS 4623 : 2016 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 3,000 PSI, 275 DEGREES F, HEAVY DUTY, AIRCRAFT HYDRAULIC SYSTEMS |
| SAE AS 1227 : 2013 | HOSE ASSEMBLY, CONVOLUTED POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, LOW PRESSURE, UP TO 400 DEGREES F, AIRCRAFT |
| SAE AS 5870 : 2014 | THREAD INSPECTION PRACTICES |
| SAE AS 7454 : 2016 | BOLTS AND SCREWS, STEEL, LOW ALLOY, HEAT RESISTANT 135000 PSI TENSILE STRENGTH, NORMALIZED AND TEMPERED, ROLL THREADED |
| SAE AS 3071 : 2012 | ACCEPTANCE CRITERIA - MAGNETIC PARTICLE, FLUORESCENT PENETRANT, AND CONTRAST DYE PENETRANT INSPECTION |
| SAE AS 7482 : 2015 | STUDS, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, TENSILE STRENGTH 130 KSI, 1800 DEGREES F SOLUTION HEAT TREATED, AGED BEFORE ROLL THREADING PROCUREMENT SPECIFICATION |
| SAE AS 7477 : 2017 | BOLTS AND SCREWS, STEEL, UNS S66286 TENSILE STRENGTH 130 KSI, PROCUREMENT SPECIFICATION |
| EN 6094:2016 | Aerospace series - Washer, spring, countersunk |
| EN 6092:2016 | Aerospace series - Receptacle, floating, double lug |
| EN 6105:2016 | Aerospace series - Stud with shoulder |
| SAE AS 7460 : 2017 | BOLTS AND SCREWS, TITANIUM ALLOY, 6.0AL-4.0V, PROCUREMENT SPECIFICATION FOR |
| MIL-DTL-32480-9 Base Document:2014 | Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel |
| MIL-DTL-32371-5 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Union Cross, Spherical on Branch |
| MIL-DTL-32371-8 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 90 Degree Elbow, Bulkhead |
| MIL-DTL-32371-7 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 45 Degrees Elbow, Bulkhead |
| MIL-STD-648 Revision E:2016 | Specialized Shipping Containers |
| MIL-DTL-25867 Revision D:2006 | GAGE, PRESSURE, DIAL INDICATING, PNEUMATIC |
| MIL-DTL-32480-4 Base Document:2014 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless Male to ORFS Bulkhead |
| SAE AS 7468 : 2012 | BOLTS, COBALT-CHROMIUM-NICKEL ALLOY, UNS R30035, TENSILE STRENGTH 260 KSI, PROCUREMENT SPECIFICATION |
| MIL-DTL-32371-2 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 45 Degrees Elbow |
| JSSG-2009 Revision A:2013 | Air Vehicle Subsystems |
| MIL-DTL-7627 Revision G:2010 | INDICATOR, TURN AND SLIP, 28 V DC |
| MS21949 Revision C:2014 | BOLT-CLUSTER FITTING, SINGLE PORT-FLARE |
| MIL-DTL-32460-2 Base Document:2013 | FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE |
| SAE AS 4468 G : 2017 | HOSE ASSEMBLY, 125 PSI, LINED SILICONE, POTABLE WATER, PROCUREMENT SPECIFICATION |
| MIL-DTL-32434-10 Base Document:2013 | Hose Assembly, Polytetrafluoroethylene, Convoluted, Permanently Attached Fittings, High Temperature, Medium Pressure, Flange-to-Flange |
| MS21960 Revision D:2011 | Body, Cluster Fitting, Three-Way, Internal Boss |
| MIL-DTL-32434-6 Base Document:2013 | Hose Assembly, Polytetrafluorethylene, Convoluted, Permanently Attached Fittings, High Temperature, Medium Pressure, Flare-to-Flare |
| MS8005 Revision E:2016 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PERMANENTLY ATTACHED FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLARE-TO-FLARE |
| AN6204 Revision L:2013 | Valve, Hydraulic Bleeder |
| MIL-PRF-26626 Revision F:2008 | HOSE ASSEMBLY, REINFORCED, CRYOGENIC, OXYGEN |
| SAE AS 5377 : 2000 | NUT, SELF-LOCKING, 0.7500 THRU 1.5000 THREAD SIZES, UNS S66286, 160,000 PSI, 800 DEGREE F, UNJ THREAD - PROCUREMENT SPECIFICATION |
| SAE AS 7470 : 2012 | BOLTS AND SCREWS, STEEL, CORROSION AND MODERATE HEAT RESISTANT HEAT TREATED, ROLL THREADED |
| MS8007 Revision D:2016 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PERMANENTLY ATTACHED FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLARE-TO-FLANGE |
| SAE ARP 700 : 1997(R2006) | HIGH STRENGTH ELEVATED TEMPERATURE BOLTING PRACTICE |
| SAE AS 4875 : 2016 | FITTINGS, STRAIGHT THREADED BOSS OR FLANGED, FLUID CONNECTION |
| SAE AS 1424 : 2014 | HOSE ASSEMBLIES, METAL, MEDIUM PRESSURE, HIGH TEMPERATURE |
| NASM 21083 : 2004 | NUT, SELF-LOCKING, HEXAGON, NON-METALLIC INSERT, LOW HEIGHT, 250 DEGREES F |
| SAE AS 4941 : 2015 | AEROSPACE - GENERAL REQUIREMENTS FOR COMMERCIAL AIRCRAFT HYDRAULIC COMPONENTS |
| SAE AS 4393 : 2015 | NUT, SELF-LOCKING, UNS S66286, 1200 DEGREES F, 160,000 PSI, UNJ THREAD |
| SAE AS 7467 : 2013 | BOLTS AND SCREWS, NICKEL ALLOY, UNS N07718, TENSILE STRENGTH 185 KSI, STRESS RUPTURE RATED, PROCUREMENT SPECIFICATION |
| SAE AIR 6553 : 2014 | MEASUREMENT UNCERTAINTY AND CONSUMER RISK |
| SAE AS 1946 : 2015 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, UP TO 1500 PSI AND 450 DEGREES F, HYDRAULIC AND PNEUMATIC |
| ASME B18.29.1 : 2010 : R2017 | Helical Coil Screw Thread Inserts--Free Running and Screw Locking (Inch Series) (B18.29.1 - 2010) |
| ASME B18.29.1 : 2010 | HELICAL COIL SCREW THREAD INSERTS - FREE RUNNING AND SCREW LOCKING (INCH SERIES) |
| PREN 6105 : 200P1 | AEROSPACE SERIES - STUD WITH SHOULDER |
| PREN 6131 : 200P3 | AEROSPACE SERIES - COMPOSITE CLIP NUT, SELF LOCKING |
| SAE AS 6369 : 2017 | COUPLING ASSEMBLY, V-BAND SHEET METAL WIDE FLANGE, PNEUMATIC TUBE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.