SAE AS1710D
Current
The latest, up-to-date edition.
Coupling, Fuel, Flexible, Variable Cavity, Threaded Type With Ferrules
Hardcopy , PDF
English
25-11-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. NOTES
Describes the requirements for a threaded flexible coupling assembly, which utilizes ferrules or machined tube end fittings to join tubing and components in aircraft fuel and fuel vent or other systems.
| DocumentType |
Standard
|
| Pages |
25
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
This SAE Aerospace Standard (AS) defines the requirements for a threaded flexible coupling assembly, which utilizes ferrules or machined tube end fittings to join tubing and components in aircraft fuel and fuel vent or other systems. This coupling assembly is designed for use from -65 to +200 °F and at 125 psig peak working pressure, and the coupling assembly may be used in other fluid systems when requirements are within the limits.
| SAE AS4060 | Tube Fitting Swaged Joint, Roller Expander Manual Process, Requirements for |
| SAE AS5356B | Coupling, Fuel Line, Flexible, 125 psi General Specification for |
| SAE AS1718E | COUPLING BODY, FLEXIBLE, VARIABLE CAVITY, THREADED FERRULE TYPE TUBE ENDS |
| MIL-PRF-7024 Revision F:2012 | CALIBRATING FLUIDS, AIRCRAFT FUEL SYSTEM COMPONENTS |
| SAE AS1714D | NUT ASSEMBLY, COUPLING, FLEXIBLE, VARIABLE CAVITY, THREADED, FERRULE TYPE TUBE ENDS |
| SAE AS1713C | HALF COUPLING SUBASSEMBLY, FLEXIBLE, VARIABLE CAVITY, THREADED FERRULE TYPE TUBE ENDS |
| SAE AS567K | Safety Cable, Safety Wire, Key Washers, and Cotter Pins for Propulsion Systems, General Practices for Use of |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| ASTM D 5118/D5118M : 2015 : REDLINE | Standard Practice for Fabrication of Fiberboard Shipping Boxes |
| MIL-STD-130 Revision N:2007 | IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY |
| SAE AS1712C | COUPLING SUBASSEMBLY, FLEXIBLE, VARIABLE CAVITY, THREADED, FERRULE TYPE TUBE ENDS |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| MIL-STD-2073-1 Revision E:2008 | STANDARD PRACTICE FOR MILITARY PACKAGING |
| PPP-B-566 Revision E:1974 | BOX, FOLDING, PAPERBOARD |
| SAE AS1055D | Fire Testing of Flexible Hose, Tube Assemblies, Coils, Fittings, and Similar System Components |
| SAE AS1716D | FERRULE, COUPLING, FLEXIBLE, VARIABLE CAVITY, THREADED, FERRULE TUBE END |
| MIL-HDBK-831 Revision A:2013 | PREPARATION OF TEST REPORTS |
| SAE AMSWWT700/6C | Tube, Aluminum Alloy, Drawn, Seamless, 6061 |
| SAE AS568D | Aerospace Size Standard for O-rings |
| MIL-PRF-680 Revision C:2010 | DEGREASING SOLVENT |
| MIL-STD-889 Revision C:2016 | DISSIMILAR METALS |
| SAE AS7003D | Nadcap Program Requirements |
| SAE AS7112 | NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR FLUID SYSTEM COMPONENTS |
| SAE AMSR25988 | Rubber, Fluorosilicone Elastomer, Oil-and-Fuel-Resistant, Sheets, Strips, Molded Parts, and Extruded Shapes |
| VV-P-236 Revision A:1977 | PETROLATUM, TECHNICAL |
| PPP-B-676 Revision E:1992 | BOXES SET-UP |
| FED-STD-H28-2 Revision B:1991 | Screw-Thread Standards for Federal Services Section 2 Unified Inch Screw Threads- UN and UNR Thread Forms |
| SAE AS1717D | RETAINER, COUPLING, FLEXIBLE, VARIABLE CAVITY, THREADED FERRULE TYPE TUBE ENDS |
| ASTM D 6251/D6251M : 2011 : REDLINE | Standard Specification for Wood-Cleated Panelboard Shipping Boxes |
| MIL-L-10547 Revision E:1975 | LINERS, CASE, AND SHEET, OVERWRAP; WATER-VAPORPROOF OR WATERPROOF, FLEXIBLE |
| SAE AS1720B | FITTING END, COUPLING, FLEXIBLE VARIABLE CAVITY THREADED, FERRULE TYPE DESIGN STANDARD |
| SAE AS1711B | COUPLING, FLEXIBLE, VARIABLE CAVITY, THREADED FERRULE TYPE TUBE ENDS, ENVELOPE DIMENSIONS DESIGN STANDARD |
| SAE AS1719B | FITTING END, HALF-COUPLING, FLEXIBLE VARIABLE CAVITY THREADED, FERRULE TYPE DESIGN STANDARD |
| SAE ARP9013 | Statistical Product Acceptance Requirements |
| SAE AS4060 | Tube Fitting Swaged Joint, Roller Expander Manual Process, Requirements for |
| PPP-B-585 Revision D:1992 | BOX, WOOD, WIREBOUND |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.