SAE AS 12500 : 2018
Current
Current
The latest, up-to-date edition.
CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES
Available format(s)
Hardcopy , PDF
Language(s)
French
Published date
24-04-2018
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. QUALITY ASSURANCE
5. PACKAGING
6. NOTES
7. NOTES
Specifies corrosion prevention and mitigation aspects in Avionics, Electronics, and Electrical Wire Interconnect Systems (EWIS) from the design through the life cycle of aerospace and other systems.
| Committee |
G-25
|
| DocumentType |
Standard
|
| Pages |
21
|
| PublisherName |
SAE International
|
| Status |
Current
|
| SAE AMS 2416 : 2010 | PLATING, NICKEL-CADMIUM DIFFUSED |
| MIL-M-24041 Revision C:1981 | MOLDING AND POTTING COMPOUND |
| SAE AS 1701 : 2017 | LUBRICANT, SOLID FILM |
| ASTM D 495 : 2014 | Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation |
| SAE AMS 2404 : 2013 | PLATING, ELECTROLESS NICKEL |
| ASTM D 3955 : 2013 : REDLINE | Standard Specification for Electrical Insulating Varnishes |
| SAE AMS QQ P 416 : 2016 | PLATING, CADMIUM (ELECTRODEPOSITED) |
| MIL-STD-883 Revision K:2016 | TEST METHOD STANDARD - MICROCIRCUITS |
| MIL-D-3464 Revision E:1987 | DESICCANTS, ACTIVATED, BAGGED, PACKAGING USE AND STATIC DEHUMIDIFICATION |
| ASTM G 21 : 2015 : REDLINE | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
| SAE AS 4461 : 2016 | ASSEMBLY AND SOLDERING CRITERIA FOR HIGH QUALITY/HIGH RELIABILITY SOLDERING WIRE AND CABLE TERMINATION IN AEROSPACE VEHICLES |
| IPC J STD 001 : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| MIL-DTL-45204 Revision D:2007 | Gold Plating, Electrodeposited |
| MIL-PRF-23586 Revision F:1996 | Sealing Compound (With Accelerator), Silicone Rubber, Electrical |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| MIL-STD-2073-1 Revision E:2008 | STANDARD PRACTICE FOR MILITARY PACKAGING |
| AWS C3.5 : 1999 | SPECIFICATION FOR INDUCTION BRAZING |
| IPC CC 830 : B | QUALIFICATION AND PERFORMANCE OF ELECTRICAL INSULATING COMPOUND FOR PRINTED WIRING ASSEMBLIES |
| ASTM G 85 : 2011 : REDLINE | Standard Practice for Modified Salt Spray (Fog) Testing |
| ASTM E 595 : 2015 : REDLINE | Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment |
| SAE AMS S 7124 : 2011 | SEALING COMPOUND, POLYSULFIDE, ACCELERATOR REQUIRED, FOR AIRCRAFT STRUCTURES |
| SAE AMS QQ N 290 : 2015 | NICKEL PLATING (ELECTRODEPOSITED) |
| ASTM B 545 : 2013 : REDLINE | Standard Specification for Electrodeposited Coatings of Tin |
| MIL-DTL-85054 Revision D:2010 | CORROSION PREVENTIVE COMPOUND, WATER-DISPLACING, TRANSPARENT (FORMERLY AMLGUARD) |
| MIL-STD-1686 Revision C:1995 | ELECTROSTATIC DISCHARGE CONTROL PROGRAM FOR PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS, ASSEMBLIES AND EQUIPMENT (EXCLUDING ELECTRICALLY INITIATED EXPLOSIVE DEVICES) |
| IPC HDBK 850 : 0 | GUIDELINES FOR DESIGN, SELECTION AND APPLICATION OF POTTING MATERIALS AND ENCAPSULATION PROCESSES USED FOR ELECTRONICS PRINTED CIRCUIT BOARD ASSEMBLY |
| MIL-PRF-46002 Revision D:2010 | PRESERVATIVE OIL, CONTACT AND VOLATILE CORROSION-INHIBITED |
| SAE AMS 2418 : 2017 | PLATING, COPPER |
| IPC WHMA A 620 : B | REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES |
| SAE AMS 2426E : 2013 | COATING, CADMIUM VACUUM DEPOSITION |
| SAE ARP 6400 : 2016 | RECOMMENDED PRACTICE FOR PROCESSING AND HANDLING WIRE AND CABLE WITH SILVER PLATED CONDUCTORS AND SHIELDS |
| MIL-HDBK-454 Revision B:2007 | GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
| MIL-PRF-81309 Revision G:2014 | CORROSION PREVENTIVE COMPOUNDS, WATER DISPLACING, ULTRA-THIN FILM |
| MIL-STD-889 Revision C:2016 | DISSIMILAR METALS |
| AWS D17.2/D17.2M : 2013 | SPECIFICATION FOR RESISTANCE WELDING FOR AEROSPACE APPLICATIONS |
| MIL-DTL-117 Revision H:2001 | BAGS, HEAT-SEALABLE |
| MIL-L-23398 Revision D:1985 | LUBRICANT, SOLID FILM, AIR DRYING, CORROSION INHIBITING, NATO CODE NUMBER S 749 |
| AWS C3.4 : 1999 | SPECIFICATION FOR TORCH BRAZING |
| IPC A 610 : F | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| MIL-DTL-83488 Revision D:1999 | COATING, ALUMINUM, HIGH PURITY |
| MIL-DTL-5541 Revision F:2006 | Chemical Conversion Coatings on Aluminum and Aluminum Alloys |
| SAE AMS 2460 : 2013 | PLATING, CHROMIUM |
| SAE AS 5272 : 2016 | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING, PROCUREMENT SPECIFICATION |
| SAE AMS 2417 : 2013 | PLATING, ZINC-NICKEL ALLOY |
| SAE AS 22759 : 2014 | WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY |
| GEIA STD 0005-2 : 2012 | MITIGATING THE EFFECTS OF TIN WHISKERS IN AEROSPACE AND HIGH PERFORMANCE ELECTRONIC SYSTEMS |
| SAE AMS 2413 : 2013 | PLATING, SILVER-RHODIUM |
| SAE AMS C 81562 : 1998 | COATINGS, CADMIUM, TIN-CADMIUM AND ZINC (MECHANICALLY DEPOSITED) |
| ASTM B 679 : 1998 | Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use |
| MIL-I-17563 Revision C:1992 | IMPREGNANTS FOR ALUMINUM, COPPER, IRON, MAGNESIUM AND ZINC ALLOY CASTINGS |
| MIL-HDBK-83377 Base Document:1997 | Adhesive Bonding (Structural) for Aerospace and Other Systems, Requirements for |
| MIL-STD-276 Revision A:1992 | IMPREGNATION OF POROUS METAL CASTINGS AND POWDERED METAL COMPONENTS |
| NASA MSFC STD 3029 : 2000 | GUIDELINES FOR THE SELECTION OF METALLIC MATERIALS FOR STRESS CORROSION CRACKING RESISTANCE IN SODIUM CHLORIDE ENVIRONMENTS |
| SAE AS 29606 : 2014 | WIRE, ELECTRICAL, STRANDED, UNINSULATED COPPER, COPPER ALLOY, OR ALUMINUM, OR THERMOCOUPLE EXTENSION, GENERAL SPECIFICATION FOR |
| AWS D17.1 : 2001 | SPECIFICATION FOR FUSION WELDING FOR AEROSPACE APPLICATIONS |
| SAE AMS 03-28-2 : 2017 | PHYSICAL VAPOR DEPOSITION OF METALS: PHYSICAL VAPOR DEPOSITION OF CADMIUM FOR PROTECTION AGAINST CORROSION |
| SAE AMS 2401 : 2013 | PLATING, CADMIUM, LOW HYDROGEN CONTENT DEPOSIT |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| AWS C3.6 : 1999 | SPECIFICATION FOR FURNACE BRAZING |
| SAE AMS 2759/9 : 2009 | HYDROGEN EMBRITTLEMENT RELIEF (BAKING) OF STEEL PARTS |
| MIL-STD-186 Revision F:2002 | PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS |
| MIL-STD-7179 Revision A:2009 | Finishes, Coatings, and Sealants, for the Protection of Aerospace Weapons Systems and Support Equipment |
| FED-STD-376 Revision B:1993 | PREFERRED METRIC UNITS FOR GENERAL USE BY THE FEDERAL GOVERNMENT |
| SAE AS 50881 : 2015 | WIRING AEROSPACE VEHICLE |
| SAE AMS 2700E : 2011 | PASSIVATION OF CORROSION RESISTANT STEELS |
| AWS C3.7 : 1999 | SPECIFICATION FOR ALUMINUM BRAZING |
| SAE AMS 2403 : 2015 | PLATING, NICKEL, GENERAL PURPOSE |
| MIL-HDBK-838 Base Document:1997 | LUBRICATION OF MILITARY EQUIPMENT |
| A-A-59877 Base Document:2010 | Insulating Compound, Electrical, Embedding |
| MIL-PRF-8516 Revision G:1997 | SEALING COMPOUND, SYNTHETIC RUBBER, ELECTRIC CONNECTORS AND ELECTRIC SYSTEMS, CHEMICALLY CURED |
| SAE AMS P 81728 : 2015 | PLATING, TIN-LEAD (ELECTRODEPOSITED) |
| SAE AMS C 8837 : 2015 | COATING, CADMIUM (VACUUM DEPOSITED) |
| MIL-PRF-46147 Revision D:2008 | LUBRICANT, SOLID FILM, AIR CURED, CORROSION INHIBITING |
| MIL-PRF-6855 Revision F:2009 | RUBBER, SYNTHETIC, SHEETS, STRIPS, MOLDED OR EXTRUDED SHAPES, GENERAL SPECIFICATION FOR |
| SAE AMS 2427 : 2012 | ALUMINUM COATING, ION VAPOR DEPOSITION |
| A-A-59135 Base Document:1997 | PACKAGING MATERIAL, SHEET |
| SAE AMS C 26074 : 2013 | ELECTROLESS NICKEL COATINGS |
| MIL L 87177 : A | LUBRICANT, CORROSION PREVENTIVE COMPOUND, WATER DISPLACING, SYNTHETIC |
| MIL-PRF-46010 Revision H:2013 | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING NATO CODE S-1738 |
| SAE AMS 2526 : 2013 | MOLYBDENUM DISULFIDE COATING, THIN LUBRICATING FILM, IMPINGEMENT APPLIED |
| SAE AIR 4487 : 2011 | INVESTIGATION OF SILVER PLATED CONDUCTOR CORROSION (RED PLAGUE) |
| MIL-I-8574 Revision E:1982 | INHIBITOR, CORROSION, VOLATILE, UTILIZATION OF |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.