SAE ARP 5555 : 2016
Current
The latest, up-to-date edition.
RECOMMENDATIONS FOR INSTALLATION OF SEALS IN STANDARD GLANDS
Hardcopy , PDF
English
16-02-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. REFERENCES
3. GENERAL DESIGN REQUIREMENTS FOR
HYDRAULIC UNITS
4. STANDARD O-RING AND D-RING SEALS
5. NON-STANDARD HYDRAULIC SEALS
6. ANTI-EXTRUSION DEVICES
7. STATIC SEALS
8. DYNAMIC SEALS
9. DESIGN DATA ON THE USE OF DYNAMIC
AND STATIC SEALS
10. NOTES
This SAE Aerospace Recommended Practice (ARP) contains guidance regarding hardware design and installation procedures for seals in hydraulic components that utilize standard seal glands in accordance with AS4716, AS4832, AS4088, AS4052, AS5857, and AS6235.
| Committee |
A-6C2
|
| DocumentType |
Standard
|
| Pages |
17
|
| PublisherName |
SAE International
|
| Status |
Current
|
| SAE AS 4716C: 2017 | GLAND DESIGN, O-RING AND OTHER SEALS |
| SAE AS 4716 : 2011 | GLAND DESIGN, O-RING AND OTHER SEALS |
| SAE AS 4396 : 2013 | FITTING END, BULKHEAD, FLARED TUBE CONNECTION, DESIGN STANDARD |
| SAE AS 5860 : 2014 | RETAINERS, (BACK-UP RINGS), HYDRAULIC AND PNEUMATIC, POLYTETRAFLUOROETHYLENE RESIN, SINGLE TURN, STATIC GLAND |
| SAE AS 5781 : 2015 | RETAINERS (BACKUP RINGS), HYDRAULIC AND PNEUMATIC, POLYTETRAFLUOROETHYLENE RESIN, SINGLE TURN, SCARF-CUT, FOR USE IN AS4716 GLANDS |
| SAE AS 33515 D : 2014 | FITTING END, STANDARD DIMENSIONS FOR BULKHEAD FLARELESS TUBE CONNECTIONS |
| SAE AMS P 5510 : 2013 | O-RING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE 1 HYDRAULIC (-65 TO 160 DEGREES F) |
| SAE AS 1300 : 2014 | PORT - RING LOCKED FLUID CONNECTION TYPE, STANDARD DIMENSIONS FOR |
| SAE AS 28775 : 2013 | PACKING, PREFORMED, - MS28775 O-RING |
| SAE AS 4395 : 2013 | FITTING END, FLARED, TUBE CONNECTION, DESIGN STANDARD |
| SAE ARP 4752 : 2013 | AEROSPACE - DESIGN AND INSTALLATION OF COMMERCIAL TRANSPORT AIRCRAFT HYDRAULIC SYSTEMS |
| SAE AS 5782 : 2015 | RETAINERS (BACKUP RINGS), HYDRAULIC AND PNEUMATIC, POLYTETRAFLUOROETHYLENE RESIN, SOLID, UN-CUT, FOR USE IN AS4716 GLANDS |
| SAE AS 1986 : 2015 | FITTING ASSEMBLY, ADAPTER RING LOCKED PORT CONNECTION TO BEAM SEAL 4000 PSI AND 5000 PSI /9/ |
| SAE AS 4099 : 2012 | ADAPTER, ASSEMBLY - PORT CONNECTION, RING LOCKED TO FLARELESS TUBE END |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| SAE AS 5440 : 2011 | HYDRAULIC SYSTEMS, AIRCRAFT, DESIGN AND INSTALLATION REQUIREMENTS FOR |
| SAE AS 568 : 2014 | AEROSPACE SIZE STANDARD FOR O-RINGS |
| SAE AS 5857 : 2010 | GLAND DESIGN, O-RING AND OTHER ELASTOMERIC SEALS, STATIC APPLICATIONS |
| SAE AS 6235 : 2015 | FACE SEAL GLAND DESIGN, STATIC, O-RING AND OTHER SEALS FOR AEROSPACE HYDRAULIC AND PNEUMATIC APPLICATIONS |
| MS28782 Revision E:2006 | RETAINER, PACKING, BACK-UP, TEFLON |
| SAE AS 83461/2 : 2016 | STRAIGHT THREAD TUBE FITTING BOSS O-RING MOLDED FROM AMS-P-83461 RUBBER |
| MS28773 Revision A:2005 | RETAINER, PACKING, BACK-UP, TETRAFLUOROETHYLENE, STRAIGHT THREAD TUBE FITTING BOSS |
| SAE AS 8791 : 2014 | HYDRAULIC AND PNEUMATIC RETAINERS (BACK-UP RINGS), POLYTETRAFLUOROETHYLENE (PTFE) RESIN |
| MIL-G-5514 Revision G:1993 | GLAND DESIGN, PACKINGS, HYDRAULIC GENERAL REQUIREMENTS FOR |
| SAE AS 83461/1 : 2016 | M83461 O-RING MOLDED FROM AMS-P-83461 RUBBER |
| SAE AS 28778 : 2016 | O-RING, STRAIGHT THREAD TUBE FITTING BOSS MOLDED FROM AMS-P-5510 RUBBER |
| MS28783 Revision F:2006 | RING, GASKET, BACK-UP, PTFE |
| SAE AS 4088 : 2011 | AEROSPACE ROD SCRAPER GLAND DESIGN STANDARD |
| SAE AS 33514 : 2015 | FITTING END, STANDARD DIMENSIONS FOR FLARELESS TUBE CONNECTION AND GASKET SEAL |
| NAS1612:2005 | PACKING, ETHYLENE PROPYLENE PREFORMED, O-RING PHOSPHATE ESTER RESISTANT, STRAIGHT THREAD TUBE FITTING BOSS (-65 DEGREES F TO 250/300 DEGREES F) |
| SAE AS 28772 : 2015 | 'D' RING SEAL FOR SHOCK STRUTS MOLDED FROM AMS-P-25732 MATERIAL |
| SAE ARP 4925 : 2014 | AEROSPACE DESIGN AND INSTALLATION OF COMMERCIAL TRANSPORT HELICOPTER HYDRAULIC SYSTEMS |
| SAE AS 4052 : 2015 | GLAND DESIGN: SCRAPER, LANDING GEAR, INSTALLATION |
| SAE AS 5202 : 2005 | PORT OR FITTING END, INTERNAL STRAIGHT THREAD, DESIGN STANDARD |
| ISO 4287-1:1984 | Surface roughness — Terminology — Part 1: Surface and its parameters |
| MS21344 Revision A:2016 | FITTING INSTALLATION OF FLARED TUBE STRAIGHT THREADED CONNECTORS DESIGN STANDARD FOR |
| NAS 1611:2005 | PACKING, ETHYLENE PROPYLENE, PREFORMED O-RING, PHOSPHATE ESTER RESISTANT (-65 DEGREES F TO 250/300 DEGREES F) |
| SAE AS 5861 : 2015 | RETAINERS, (BACK-UP RINGS), HYDRAULIC AND PNEUMATIC, POLYTETRAFLUOROETHYLENE RESIN, SOLID, STATIC GLAND |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.