SAE AMS5516P
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Steel, Corrosion-Resistant, Sheet, Strip, and Plate 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated
Hardcopy , PDF
English
12-10-2012
11-03-2019
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
Covers a corrosion-resistant steel in the form of sheet, strip, and plate.
| DocumentType |
Standard
|
| Pages |
5
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This specification covers a corrosion-resistant steel in the form of sheet, strip, and plate.
| MIL-DTL-8783 Revision D:2009 | Clamp, Hose, Flat Band 500 Degrees F, General Specification for |
| SAE AMS3281F | Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density for Intermittent Use to 360 °F (182 °C) |
| SAE AMS3265E | Sealing Compound, Polysulfide (T) Rubber, Fuel Resistant, Non-Chromated Corrosion Inhibiting For Intermittent Use to 360 °F (182 °C) |
| SAE AS27196B | SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, FLUOROCARBON RUBBER, AMS7276 |
| SAE AMS3278B | Sealing and Coating Compound, Polyurethane (PUR) Fuel Resistant High Tensile Strength / Elongation For Integral Fuel Tanks / Fuel Cavities / General Purpose |
| SAE AS27197B | SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, SILICONE RUBBER, AMS7268 |
| SAE AMS3276F | Sealing Compound, Integral Fuel Tanks and General Purpose, Intermittent Use to 360 °F (182 °C) |
| SAE AMS3102 | Sealing Compound, Polythioether Rubber Fast Curing, Light Weight (Specific Gravity 0.78, max.) for Integral Fuel Tanks and General Purpose, Intermittent Use to 360 °F (182 °C) |
| SAE AS269J | Identification of Material for AN, MS, and AS Engine and Propeller Standard Utility Parts and Also for Company Parts |
| MIL-DTL-24127 Revision A:2016 | Eductors, Gasoline, Oil, or Water |
| SAE AS5127B | Aerospace Standard Test Methods for Aerospace Sealants Methods for Preparing Aerospace Sealant Test Specimens |
| SAE AMS3263A | Sealing Compound, Polythioether, Ambient Cure or Immediate Heat Cure For Aircraft Structures, Fuel Resistant with Intermittent Use to 400°CF (204°CC) |
| MIL-DTL-21567 Revision B:2009 | Compound, Silicone, Soft Film |
| SAE AMSS8802D | Sealing Compound, Fuel Resistant, Integral Fuel Tanks and Fuel Cell Cavities |
| SAE AS27198B | SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, FLUOROSILICONE RUBBER, MIL-DTL-25988 |
| SAE AMS3259B | Sealing Compound, Polythioether Nonchromated, Corrosion Inhibiting for Intermittent Use to 360°F (182°C) |
| MIL-DTL-22499 Revision D:1998 | Shim Stock, Laminated (S/S by SAE-AMS-DTL-22499) |
| SAE AMSDTL22499A | Shim Stock, Laminated |
| SAE AMS3277J | Sealing Compound, Polythioether Rubber Fast Curing for Integral Fuel Tanks and General Purpose, Intermittent Use to 360 °F (182 °C) |
| SAE AMS3284C | Sealing Compound, Low Adhesion, for Removable Panels and Fuel Tank Inspection Plates |
| SAE AMS2248H | Chemical Check Analysis Limits, Corrosion- and Heat-Resistant Steels and Alloys, Maraging and Other Highly Alloyed Steels, and Iron Alloys |
| ASTM A 480/A480M : 2017-11 | SPECIFICATION FOR GENERAL REQUIREMENTS FOR FLAT-ROLLED STAINLESS AND HEAT-RESISTING STEEL PLATE, SHEET, AND STRIP |
| SAE AMS2371K | Quality Assurance Sampling and Testing Corrosion and Heat-Resistant Steels and Alloys Wrought Products and Forging Stock |
| ASTM E 353 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
| SAE AS4194A | Sheet and Strip Surface Finish Nomenclature |
| ASTM E 290 : 2014 : REDLINE | Standard Test Methods for Bend Testing of Material for Ductility |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.