SAE AMS 6350 : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
STEEL SHEET, STRIP, AND PLATE, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130)
Hardcopy , PDF
13-04-2020
English
01-01-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
Specifies an aircraft-quality, low-alloy steel in the form of sheet, strip, and plate.
| Committee |
AMS E
|
| DevelopmentNote |
Supersedes SAE AMS 6355 (07/1999) Supersedes SAE AMS S 18728. (07/2006)
|
| DocumentType |
Revision
|
| Pages |
6
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| MIL-S-18729 Revision C:1965 | Similar to |
| SAE AMS 1375 : 2012 | REMOVER, PAINT, EPOXY AND POLYURETHANE PAINT SYSTEMS |
| SAE AMS 2644 : 2013 | INSPECTION MATERIAL, PENETRANT |
| MIL-DTL-613 Revision D:2014 | Grapnels, Marine, Trip Wire, and Crash Truck |
| SAE AIR 5479 : 2017 | ENVIRONMENTALLY COMPLIANT PROCESSES FOR LANDING GEAR |
| SAE AMS 2437 : 2012 | COATING, PLASMA SPRAY DEPOSITION |
| SAE MA 1573 : 2016 | NUT, SELF-LOCKING, STEEL, CLASS 1100 MPA/235 DEGREES C, MJ THREAD PROCUREMENT SPECIFICATION FOR, METRIC |
| SAE AMS 6457E : 2017 | STEEL, WELDING WIRE, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS P 5315 : 2013 | ACRYLONITRILE-BUTADIENE (NBR) RUBBER FOR FUEL-RESISTANT SEALS 60 TO 70 |
| BS M 75:1994 | Aircraft de-icing/anti-icing Newtonian fluids, ISO type I |
| SAE AMS 1377 : 2012 | REMOVER, PAINT, EPOXY AND POLYURETHANE PAINT SYSTEM, NON-CHLORINATED SOLVENT |
| SAE AMS 3158 : 2014 | SOLUTION, FLUORESCENT PENETRANT, WATER BASE FOR LOX COMPATIBILITY |
| MIL PRF 0032287 : 0 | PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT |
| SAE AMS 6375 : 2016 | STEEL, WELDING WIRE, 0.50CR - 0.55NI - 0.20MO (0.18 - 0.23C) (SAE 8620), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 2484 : 2010 | BLACKENING SOLUTION FOR STEEL, TOUCH-UP METHOD |
| MIL-STD-1884 Revision A:1991 | COATING, PLASMA SPRAY DEPOSITION |
| SAE AMS P 5510 : 2013 | O-RING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE 1 HYDRAULIC (-65 TO 160 DEGREES F) |
| MIL-PRF-32287 Revision A:2011 | PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT |
| SAE AS 269J:2012:(S2018) | IDENTIFICATION OF MATERIAL FOR AN, MS AND AS ENGINE AND PROPELLER STANDARD UTILITY PARTS AND ALSO FOR COMPANY PARTS |
| SAE AMS 6461L:2001(S2016) | STEEL, WELDING WIRE 0.95CR - 0.20V (0.28 - 0.33C) (SAE 6130) VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AS 1241 : 2016 | FIRE RESISTANT PHOSPHATE ESTER HYDRAULIC FLUID FOR AIRCRAFT |
| MIL-DTL-5521 Revision C:2007 | Washer, Aircraft Hydraulic Packing Back-Up |
| MIL-DTL-83488 Revision D:1999 | COATING, ALUMINUM, HIGH PURITY |
| SAE AMS 7258 : 2001 | RINGS, SEALING, BUTADIENE-ACRYLONITRILE (NBR) RUBBER FUEL RESISTANT, LOW SHRINKAGE 65-75 |
| SAE AMS 2370 : 2016 | QUALITY ASSURANCE SAMPLING AND TESTING, CARBON AND LOW-ALLOY STEEL WROUGHT PRODUCTS AND FORGING STOCK |
| ASTM E 384 : 2017 : REDLINE | Standard Test Method for Microindentation Hardness of Materials |
| SAE AMS 2301 : 2015 | STEEL CLEANLINESS, AIRCRAFT QUALITY MAGNETIC PARTICLE INSPECTION PROCEDURE |
| ASTM E 350 : 2012-09 | TEST METHODS FOR CHEMICAL ANALYSIS OF CARBON STEEL, LOW-ALLOY STEEL, SILICON ELECTRICAL STEEL, INGOT IRON, AND WROUGHT IRON |
| SAE AMS 2807B : 2012 | IDENTIFICATION, CARBON AND LOW-ALLOY STEELS, CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS, SHEET, STRIP, PLATE, AND AIRCRAFT TUBING |
| SAE AMS 2259 : 2012 | CHEMICAL CHECK ANALYSIS LIMITS, WROUGHT LOW-ALLOY AND CARBON STEELS |
| ASTM E 290 : 2014 : REDLINE | Standard Test Methods for Bend Testing of Material for Ductility |
| SAE AMS 2252 : 2016 | TOLERANCES - LOW-ALLOY STEEL SHEET, STRIP, AND PLATE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.