SAE AMS 3695 : 2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ADHESIVE FILM, EPOXY-BASE, FOR HIGH DURABILITY STRUCTURAL ADHESIVE BONDING
Hardcopy , PDF
14-02-2022
English
14-08-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
Specifies film adhesives compounded from modified epoxy resins in the form of ready-to-use sheet, supplied in rolls, either supported by mat or by woven monofilaments or unsupported.
| Committee |
AMS-P17
|
| DocumentType |
Standard
|
| Pages |
13
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE AMS 3695/1 : 2014 | ADHESIVE FILM, EPOXY-BASE, HIGH DURABILITY, FOR 95 DEGREES C (200 DEGREES F) SERVICE |
| SAE AMS 3695/4 : 2014 | ADHESIVE FILM, EPOXY-BASE, HIGH DURABILITY, FOR 215 DEGREES C (420 DEGREES F) SERVICE |
| SAE AMS 3695/2 : 2014 | ADHESIVE FILM, EPOXY-BASE, HIGH DURABILITY, FOR 120 DEGREES C (250 DEGREES F) SERVICE |
| SAE AMS 3695/3 : 2014 | ADHESIVE FILM, EPOXY-BASE, HIGH DURABILITY, FOR 175 DEGREES C (350 DEGREES F) SERVICE |
| SAE AMS 3107/3 : 1992 | PRIMER, ADHESIVE, CORROSION-INHIBITING, HIGH DURABILITY EPOXY, -55 TO +175 DEGREES C (-67 TO +347 DEGREES F) |
| MIL L 23699 : E | LUBRICATING OIL, AIRCRAFT TURBINE ENGINES, SYNTHETIC BASE |
| MIL T 5624 : R | TURBINE FUEL, AVIATION, GRADES JP 4 AND JP 5 |
| SAE AMS 3107/2 : 1991 | PRIMER, ADHESIVE, CORROSION-INHIBITING, HIGH DURABILITY EPOXY, -55 TO +120 DEGREES C (-67 TO +248 DEGREES F) |
| SAE AMS 4037 : 2014 | ALUMINUM ALLOY, SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN (2024; -T3 FLAT SHEET, -T351 PLATE) SOLUTION HEAT TREATED |
| SAE AMS 1425 : 1990 | DEICING FLUID, AIRCRAFT, ETHYLENE GLYCOL BASE |
| ASTM D 1781 : 1998 | Standard Test Method for Climbing Drum Peel for Adhesives |
| TT-S-735 Revision A:1988 | STANDARD TEST FLUIDS, HYDROCARBON |
| SAE AMS3020A | OIL, REFERENCE, FOR 'L' STOCK RUBBER TESTING |
| SAE AMS 3107/1 : 1991 | PRIMER, ADHESIVE, CORROSION-INHIBITING, HIGH DURABILITY EPOXY, -55 TO +95 DEGREES C (-67 TO +203 DEGREES F) |
| SAE AMS 2350 : 1989 | STANDARDS AND TEST METHODS |
| ASTM D 898 : 2005 | Standard Test Method for Applied Weight Per Unit Area of Dried Adhesive Solids (Withdrawn 2006) |
| MIL-STD-794 Revision E:1982 | PART AND EQUIPMENT, PROCEDURES FOR PACKAGING AND PACKING OF |
| SAE AMS 3107/4 : 1992 | PRIMER, ADHESIVE, CORROSION-INHIBITING, HIGH DURABILITY EPOXY, -55 TO +215 DEGREES C (-67 TO +419 DEGREES F) |
| MIL-STD-1472 Revision G:2012 | HUMAN ENGINEERING |
| ASTM C 297 : 1994 : R1999 | Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions |
| QQ-A-250-5 Revision F:1971 | ALUMINUM ALLOY ALCLAD 2024, PLATE AND SHEET |
| SAE AMS 2825 : 1987 | MATERIAL SAFETY DATA SHEETS |
| SAE AMS 4348 : 2006 | CORE, HONEYCOMB, ALUMINUM ALLOY, CORROSION INHIBITED FOR SANDWICH CONSTRUCTION 5052, 350 (177) |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| SAE ARP 1524 : 2013 | SURFACE PREPARATION AND PRIMING OF ALUMINUM ALLOY PARTS FOR HIGH DURABILITY STRUCTURAL ADHESIVE BONDING |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.