SAE AMS 3144 : 2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PRIMER, ANODIC ELECTRODEPOSITION FOR AIRCRAFT APPLICATIONS
Hardcopy , PDF
21-10-2019
English
01-01-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
Specifies the requirements for a waterborne, corrosion inhibiting, chemical and solvent resistant, anodic electrodeposition epoxy primer capable of curing at 200 to 210 degrees F (93 to 99 degrees C).
| Committee |
AMS G8
|
| DocumentType |
Standard
|
| Pages |
17
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| FED-STD-313 Revision D:1996 | MATERIAL SAFETY DATA, TRANSPORTATION DATA AND DISPOSAL DATA FOR HAZARDOUS MATERIALS FURNISHED TO GOVERNMENT ACTIVITIES |
| SAE AMS S 8802 : 2015 | SEALING COMPOUND, FUEL RESISTANT, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES |
| SAE AMS 1640 : 2011 | CORROSION REMOVING COMPOUND, FOR AIRCRAFT SURFACES |
| MIL-PRF-81733 Revision D:1998 | SEALING AND COATING COMPOUND, CORROSION INHIBITIVE |
| MIL-PRF-7808 Revision L:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
| MIL-PRF-85285 Revision E:2012 | COATING: POLYURETHANE, AIRCRAFT AND SUPPORT EQUIPMENT |
| SAE AMS QQ A 250/4 : 2015 | ALUMINUM ALLOY 2024, PLATE AND SHEET |
| ASTM G 85 : 2011 : REDLINE | Standard Practice for Modified Salt Spray (Fog) Testing |
| MIL-PRF-23377 Revision K:2012 | PRIMER COATINGS: EPOXY, HIGH-SOLIDS |
| SAE AS 5127/1 : 2014 | AEROSPACE STANDARD TEST METHODS FOR AEROSPACE SEALANTS TWO-COMPONENT SYNTHETIC RUBBER COMPOUNDS |
| SAE AMS 3277 : 2015 | SEALING COMPOUND, POLYTHIOETHER RUBBER, FAST CURING FOR INTEGRAL FUEL TANKS AND GENERAL PURPOSE, INTERMITTENT USE TO 360 DEGREES F (182 DEGREES C) |
| MIL-DTL-5541 Revision F:2006 | Chemical Conversion Coatings on Aluminum and Aluminum Alloys |
| TT-R-2918 Revision A:2001 | REMOVAL, PAINT, NO HAZARDOUS AIR POLLUTANTS (HAPS) |
| ASTM D 1974 : 1998 | Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes |
| ASTM D 2247 : 2015 : REDLINE | Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity |
| MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
| ISO 11890-1:2007 | Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method |
| SAE AMS QQ A 250/5 : 2014 | ALUMINUM ALLOY ALCLAD 2024, PLATE AND SHEET |
| CFR 29(PT1910.1000 TO END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| ASTM D 7091 : 2013 : REDLINE | Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals |
| SAE AMS 2629 : 2017 | FLUID, JET REFERENCE |
| SAE AS 1241 : 2016 | FIRE RESISTANT PHOSPHATE ESTER HYDRAULIC FLUID FOR AIRCRAFT |
| ASTM D 2794 : 1993 | TEST METHOD FOR RESISTANCE OF ORGANIC COATINGS TO THE EFFECTS OF RAPID DEFORMATION (IMPACT) |
| MIL-PRF-83282 Revision D:1997 | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537 |
| SAE AMS 2825 : 1987 | MATERIAL SAFETY DATA SHEETS |
| MIL-PRF-85582 Revision E:2012 | PRIMER COATINGS: EPOXY, WATERBORNE |
| FED-STD-141 Revision D:2001 | PAINT, VARNISH, LACQUER AND RELATED MATERIALS, METHODS OF INSPECTION, SAMPLING AND TESTING |
| ASTM D 522 : 1993 : REV A | Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings |
| ASTM D 3359 : 2017 : REDLINE | Standard Test Methods for Rating Adhesion by Tape Test |
| ASTM D 329 : 2007 | Standard Specification for Acetone |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.