SAE AMS 2279 : 2011
Current
Current
The latest, up-to-date edition.
Sorry this product is not available in your region.
1 SCOPE
2 SHEET AND STRIP
3 EXTRUSIONS
4 NOTES
Specifies established inch/pound manufacturing tolerances applicable to non-cellular rubber products ordered to inch/pound dimensions.
| Committee |
AMS CE
|
| DocumentType |
Standard
|
| ProductNote |
THIS STANDARD IS STABILIZED
|
| PublisherName |
SAE International
|
| Status |
Current
|
| SAE AMS 3240 : 2011 | CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 35-45 |
| SAE AMS 3331 : 2017 | ELASTOMER: FLUOROSILICONE RUBBER (FVMQ) FUEL AND OIL RESISTANT 65 - 75 SHORE A HARDNESS FOR PRODUCTS IN FUEL SYSTEMS/LUBRICATING OILS |
| SAE AMS 3210 : 2017 | CHLOROPRENE (CR) RUBBER ELECTRICAL RESISTANT 65 - 75 |
| SAE AMS 3357 : 2003 | RUBBER, SILICONE (VMQ) - LUBRICATING OIL AND COMPRESSION SET RESISTANT, 65-75 |
| SAE AMS 3218D : 2017 | ELASTOMER: FLUOROCARBON (FKM) RUBBER HIGH-TEMPERATURE-FLUID RESISTANT LOW COMPRESSION SET 85 TO 95 |
| SAE AMS 3213 : 2017 | ACRYLONITRILE BUTADIENE (NBR) RUBBER AROMATIC FUEL RESISTANT 75-85 |
| SAE AMS 3227 : 2013 | ACRYLONITRILE BUTADIENE (NBR) RUBBER, HOT OIL AND COOLANT RESISTANT, LOW SWELL, 55-65 |
| SAE AMS 3208 : 2014 | CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 45 - 55 |
| SAE AMS 3332 : 2015 | SILICONE RUBBER, EXTREME LOW-TEMPERATURE RESISTANT, 15 - 30 |
| SAE AMS 3348 : 2014 | SILICONE (VMQ) RUBBER 1150 PSI (7.93 MPA) TENSILE STRENGTH, HIGH RESILIENCY 25 - 35 |
| SAE AMS 3216 : 2017 | ELASTOMER: FLUOROCARBON (FKM) RUBBER HIGH-TEMPERATURE - FLUID RESISTANT LOW COMPRESSION SET 70 TO 80 |
| SAE AMS 3337 : 2018 | SILICONE (PVMQ) RUBBER - EXTREME-LOW-TEMPERATURE RESISTANT, 65-75 |
| SAE AMS 3304 : 2016 | SILICONE RUBBER, GENERAL PURPOSE, 70 DUROMETER |
| SAE AMS3353A:2023 | Elastomer: Fluorocarbon (FKM) Aircraft Engine Oil, Fuel and Hydraulic Fluid Resistant Low Temperature Sealing Tg -40 °F (-40 °C) / 70 to 80 Hardness, for Products in Aircraft Engine Oil, Fuel, and Hydraulics Systems |
| SAE AMS3334F | SILICONE RUBBER, EXTREME LOW-TEMPERATURE RESISTANT, 35 - 45 |
| SAE AMS 3384 : 2013 | Rubber, Fluorocarbon Elastomer (FKM) 70 to 80 Hardness, Low Temperature Sealing Tg -22 °F (-30 °C) For Elastomeric Shapes or Parts in Gas Turbine Engine Oil, Fuel and Hydraulic Systems |
| SAE AMS 3301 : 2011 | ELASTOMER: SILICONE RUBBER (MQ/VMQ) GENERAL PURPOSE 35 - 45 DUROMETER TYPE 'A' HARDNESS |
| SAE AMS 3325 : 2014 | FLUOROSILICONE RUBBER (FVMQ) FUEL AND OIL RESISTANT 55 - 65 DUROMETER TYPE 'A' HARDNESS FOR PRODUCTS IN FUEL SYSTEMS/LUBRICATION OILS |
| SAE AMS 3349 : 2014 | SILICONE (VMQ) RUBBER, 1100 PSI (7.58 MPA) TENSILE STRENGTH, HIGH RESILIENCY, 65 - 75 |
| SAE AMS 3305 : 2014 | SILICONE, RUBBER, GENERAL PURPOSE, 80 DUROMETER |
| SAE AMS 3209 : 2014 | CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 65 - 75 |
| SAE AMS 3338 : 2014 | SILICONE (PVMQ) RUBBER, EXTREME-LOW-TEMPERATURE RESISTANT, 75 - 85 |
| SAE AMS 3238 : 2014 | BUTYL (IIR) RUBBER, PHOSPHATE ESTER RESISTANT, 65-75 |
| SAE AMS7338A : 2013 | RUBBER: BUTYL (IIR ABBREVIATION), PHOSPHATE ESTER RESISTANT, 65 TO 75 HARDNESS, FOR SEALS IN HYDRAULIC SYSTEMS, ETC. |
| SAE AMS 3226 : 2014 | ACRYLONITRILE BUTADIENE (NBR) RUBBER, HOT OIL AND COOLANT RESISTANT, LOW SWELL, 45 - 55 |
| SAE AMS 3345 : 2015 | SILICONE RUBBER, 1000 PSI (6.89 MPA) MINIMUM TENSILE STRENGTH, 45 - 55 DUROMETER |
| SAE AMS 3212 : 2014 | ACRYLONITRILE BUTADIENE (NBR) RUBBER, AROMATIC FUEL RESISTANT, 55-65 |
| SAE AMS 3329 : 2017 | ELASTOMER: FLUOROSILICONE RUBBER (FVMQ) FUEL AND OIL RESISTANT, HIGH STRENGTH 45-55 SHORE A HARDNESS FOR PRODUCTS IN FUEL SYSTEMS/LUBRICATING OILS |
| SAE AMS 3347 : 2014 | RUBBER, SILICONE 1200 PSI (8.27 MPA), HIGH MODULUS 45 - 55 |
| SAE AMS 3205 : 2010 | SYNTHETIC RUBBER, LOW-TEMPERATURE RESISTANT, 45-55 |
| SAE AMS 3306 : 2014 | RUBBER, SILICONE 1200 PSI (8.27 MPA), HIGH MODULUS 55 - 65 |
| SAE AMS 3346 : 2013 | SILICONE RUBBER, 1000 PSI (6.89 MPA) MINIMUM TENSILE STRENGTH, 55-65 DUROMETER |
| SAE AMS 3328 : 2016 | FLUOROSILICONE (FVMQ) RUBBER, FUEL AND OIL RESISTANT, 35-45 |
| SAE AMS 3241 : 2011 | CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 55-65 |
| SAE AMS 3330C : 2017 | ELASTOMER: FLUOROSILICONE (FVMQ) RUBBER FUEL AND OIL RESISTANT 45-55 FOR PRODUCTS IN FUEL SYSTEMS/LUBRICATING OILS |
| SAE AMS 3242 : 2011 | CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 75-85 |
| SAE AMS 3237 : 2000 | BUTYL (IIR) RUBBER, PHOSPHATE ESTER RESISTANT, 35-45 |
| SAE AMS 3215 : 2012 | ACRYLONITRILE BUTADIENE (NBR) RUBBER - AROMATIC FUEL RESISTANT - 65-75 |
| SAE AMS 3356 : 2014 | SILICONE (VMQ) RUBBER, LUBRICATING OIL AND COMPRESSION SET RESISTANT, ELECTRICAL GRADE, 55 - 65 |
| SAE AMS 3207 : 2014 | CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 25 - 35 |
| SAE AMS 3382 : 2017 | ELASTOMER: TETRAFLUOROETHYLENE/PROPYLENE (FEPM) HYDRAULIC FLUID AND SYNTHETIC OIL RESISTANT 75 TO 90 HARDNESS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.