SAE AMS 2252 : 2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
TOLERANCES - LOW-ALLOY STEEL SHEET, STRIP, AND PLATE
Available format(s)
Hardcopy , PDF
Superseded date
07-10-2021
Superseded by
Language(s)
English
Published date
10-11-2016
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. THICKNESS
4. WIDTH
5. LENGTH
6. CAMBER
7. FLATNESS
8. NOTES
Describes established inch/pound manufacturing tolerances which apply to low-alloy steel sheet, strip and plate of inch/pound dimensions.
| Committee |
AMS-E
|
| DevelopmentNote |
Supersedes SAE MAM 2252. (07/2007)
|
| DocumentType |
Standard
|
| Pages |
9
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE AMS 6356 : 2015 | STEEL, SHEET, STRIP, AND PLATE, 0.95CR - 0.20MO - (0.30 - 0.35C) (4132) |
| SAE AMS 6350 : 2015 | STEEL SHEET, STRIP, AND PLATE, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130) |
| SAE AMS 6351 : 2015 | STEEL, SHEET, STRIP, AND PLATE, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130), SPHEROIDIZED |
| MIL S 81081 : A | STEEL; SHEET, CHROMIUM NICKEL MOLYBDENUM VANADIUM (FOR TORPEDO MARK 46 MOD O) |
| SAE AMS 6434 : 2016 | STEEL, SHEET, STRIP, AND PLATE, 0.78CR - 1.8NI - 0.35MO - 0.20V (0.33 - 0.38C) (4335 MOD) |
| SAE AMS 6524 : 1991 | STEEL, SHEET, STRIP, AND PLATE 1.0CR - 7.5NI - 4.5CO - 1.0MO - 0.09V (0.29 - 0.34C) CONSUMABLE ELECTRODE MELTED, ANNEALED |
| SAE AMS6523J:2022 | Steel, Sheet, Strip, and Plate 0.75Cr - 9.0Ni - 4.5Co - 1.0Mo - 0.09V (0.17 - 0.23C) Vacuum Consumable Electrode Melted, Annealed |
| SAE AMS 7713 : 2016 | IRON, ELECTRICAL, BAR AND STRIP, COLD FINISHED, ANNEALED |
| SAE AMS 6455 : 2016 | STEEL, SHEET, STRIP, AND PLATE, 0.95CR - 0.22V (0.48 - 0.53C) (SAE 6150) |
| SAE AMS 6359 : 2015 | STEEL, SHEET, STRIP, AND PLATE 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) |
| SAE AMS 6518 : 1987 | STEEL SHEET, STRIP, AND PLATE, MARAGING, 19NI - 3.0MO - 1.4TI - 0.10AL DOUBLE VACUUM MELTED, SOLUTION HEAT TREATED |
| SAE AMS 6439 : 2016 | STEEL SHEET, STRIP, AND PLATE, 1.05CR - 0.55NI - 1.0MO - 0.12V (0.42 - 0.48C) (D6AC), CONSUMABLE ELECTRODE VACUUM MELTED, ANNEALED |
| SAE AMS 6358 : 2016 | STEEL SHEET, STRIP, AND PLATE, 0.50CR - 0.55NI - 0.25MO (0.38 - 0.43C) (SAE 8740) |
| SAE AMS 6385 : 2015 | STEEL SHEET, STRIP, AND PLATE, LOW ALLOY, HEAT-RESISTANT, 0.65SI - 1.25CR - 0.50MO - 0.25V (0.27 - 0.33C) |
| SAE AMS 6520E : 2016 | STEEL, MARAGING, SHEET, STRIP, AND PLATE, 18NI - 7.8CO - 4.9MO - 0.40TI - 0.10AL, CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED |
| SAE AMS 6386 : 2016 | STEEL SHEET AND PLATE LOW ALLOY, HEAT TREATED 90,000 PSI (621 MPA) AND 100,000 PSI (690 MPA) YIELD STRENGTH |
| MIL S 18728 : D | STEEL PLATE, SHEET, AND STRIP, ALLOY, 8630, AIRCRAFT QUALITY |
| SAE AMS 6352 : 2013 | STEEL SHEET, STRIP, AND PLATE, 0.95CR - 0.20MO (0.33 - 0.38C) (SAE 4135) |
| MIL-S-18729 Revision C:1965 | STEEL PLATE, SHEET, AND STRIP, ALLOY, 4130, AIRCRAFT QUALITY |
| SAE AMS 6438 : 2001(S2016) | STEEL, SHEET, STRIP, AND PLATE, 1.05CR - 0.55NI - 1.0MO - 0.12V (0.45 - 0.50C) CONSUMABLE ELECTRODE VACUUM MELTED |
| SAE AMS 6354 : 2016 | STEEL, SHEET, STRIP, AND PLATE, 0.75SI - 0.62CR - 0.20MO - 0.10ZR (0.10 - 0.17C) |
| SAE AMS 6433 : 2015 | STEEL, SHEET, STRIP, AND PLATE 0.75MN - 0.78CR - 1.8NI - 0.35MO - 0.20V (0.33 - 0.38C) (4335 MOD) |
| SAE AMS 6437 : 2015 | STEEL, SHEET, STRIP, AND PLATE, 5.0CR - 1.3MO - 0.50V (0.38 - 0.43C) (H-11) |
| SAE AMS 6435 : 2017 | STEEL, SHEET, STRIP, AND PLATE, 0.75MN - 0.78CR - 1.8NI - 0.35MO - 0.20V (0.33 - 0.38C) (4335 MOD), VACUUM CONSUMABLE ELECTRODE MELTED, ANNEALED |
| SAE AMS 6522 : 2016 | STEEL PLATE 2.0CR - 10NI - 14CO - 1.0MO (0.13 - 0.17C) VACUUM MELTED, NORMALIZED, AND OVERAGED |
| SAE AMS 6395 : 2015 | STEEL SHEET, STRIP, AND PLATE, 0.95CR - 0.20MO (0.38 - 0.43C) (SAE 4140) |
| SAE AMS 6357 : 2015 | STEEL SHEET, STRIP, AND PLATE, 0.50CR - 0.55NI - 0.25MO (0.33 - 0.38C) (8735) |
| SAE AMS 6396 : 2015 | STEEL SHEET, STRIP, AND PLATE, 0.80CR - 1.8NI - 0.25MO (0.49 - 0.55C) ANNEALED |
| SAE AMS 6523H : 2017 | STEEL, SHEET, STRIP, AND PLATE, 0.75CR - 9.0NI - 4.5CO - 1.0MO - 0.09V (0.17 - 0.23C) VACUUM CONSUMABLE ELECTRODE MELTED, ANNEALED |
| SAE AMS 6454 : 2011 | STEEL, SHEET, STRIP, AND PLATE, 1.8NI - 0.80CR - 0.25MO (0.38 - 0.43C) (SAE 4340) VACUUM CONSUMABLE ELECTRODE REMELTED |
| SAE AMS 6345 : 2015 | STEEL, SHEET, STRIP, AND PLATE, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130), NORMALIZED OR OTHERWISE HEAT TREATED |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.