S.R. CEN ISO/TR 12489:2016
Current
The latest, up-to-date edition.
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RELIABILITY MODELLING AND CALCULATION OF SAFETY SYSTEMS (ISO/TR 12489:2013)
Hardcopy , PDF
English
01-01-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
European foreword
Foreword
Introduction
1 Scope
2 Analysis framework
3 Terms and definitions
4 Symbols and abbreviated terms
5 Overview and challenges
6 Introduction to modelling and calculations
7 Analytical formulae approach (low demand mode)
8 Boolean and sequential approaches
9 Markovian approach
10 Petri net approach
11 Monte Carlo simulation approach
12 Numerical reliability data uncertainty handling
13 Reliability data considerations
14 Typical applications
Annex A (informative) - Systems with safety functions
Annex B (informative) - State analysis and failure
classification
Annex C (informative) - Relationship between failure
rate conditional and unconditional failure
intensities and failure frequency
Annex D (informative) - Broad models for demand mode
(reactive) safety systems
Annex E (informative) - Continuous mode (preventive)
safety systems
Annex F (informative) - Multi-layers safety systems/multiple
safety systems
Annex G (informative) - Common cause failures
Annex H (informative) - The human factor
Annex I (informative) - Analytical formulae
Annex J (informative) - Sequential modelling
Annex K (informative) - Overview of calculations with
Boolean models
Annex L (informative) - Markovian approach
Annex M (informative) - Petri net modelling
Annex N (informative) - Monte Carlo simulation approach
Annex O (informative) - Numerical uncertainties handling
Bibliography
Helps to close the gap between the state-of-the-art and the application of probabilistic calculations for the safety systems of the petroleum, petrochemical and natural gas industries.
| DocumentType |
Standard
|
| Pages |
274
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| CEN ISO/TR 12489:2016 | Identical |
| ISO/TR 12489:2013 | Identical |
| IEC 61025:2006 | Fault tree analysis (FTA) |
| IEC 62551:2012 | Analysis techniques for dependability - Petri net techniques |
| ISO 16708:2006 | Petroleum and natural gas industries — Pipeline transportation systems — Reliability-based limit state methods |
| ISO 13628-1:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations |
| IEC 61511-1:2016+AMD1:2017 CSV | Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements |
| API RP 14C : 2017 | ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR OFFSHORE PRODUCTION FACILITIES |
| API 770 : 2001 | A MANAGER'S GUIDE TO REDUCING HUMAN ERRORS; IMPROVING HUMAN PERFORMANCE IN THE PROCESS INDUSTRIES |
| ISO 31000:2009 | Risk management Principles and guidelines |
| ISO 26000:2010 | Guidance on social responsibility |
| EEMUA 191 : 2013 | ALARM SYSTEMS - GUIDE TO DESIGN, MANAGEMENT AND PROCUREMENT |
| IEC 61508-5:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508) |
| IEC 61078:2016 | Reliability block diagrams |
| IEC 61165:2006 | Application of Markov techniques |
| IEC 61508-4:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508) |
| IEC 61508-3:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508) |
| ISO 17776:2016 | Petroleum and natural gas industries Offshore production installations Major accident hazard management during the design of new installations |
| NAMUR NE 130 : 2011 | 'PRIOR USE'-DEVICES FOR SAFETY INSTRUMENTED SYSTEMS AND SIMPLIFIED SIL CALCULATION |
| ISO 10418:2003 | Petroleum and natural gas industries Offshore production installations Analysis, design, installation and testing of basic surface process safety systems |
| IEC 62502:2010 | Analysis techniques for dependability - Event tree analysis (ETA) |
| API 580 : 2016 | RISK-BASED INSPECTION |
| API 521 : 2014 | PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS |
| IEC 61810-2:2017 | Electromechanical elementary relays - Part 2: Reliability |
| EEMUA 201 : 2010 | PROCESS PLANT CONTROL DESKS UTILISING HUMAN-COMPUTER INTERFACES - GUIDE TO DESIGN, OPERATIONAL AND HUMANCOMPUTER INTERFACE ISSUES |
| IEC 60300-3-2:2004 | Dependability management - Part 3-2: Application guide - Collection of dependability data from the field |
| IEC 61511-3:2016 | Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels |
| ISO 13628-7:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 7: Completion/workover riser systems |
| IEC 61164:2004 | Reliability growth - Statistical test and estimation methods |
| IEC 61511-2:2016 | Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1:2016 |
| ISO 13628-6:2006 | Petroleum and natural gas industries Design and operation of subsea production systems Part 6: Subsea production control systems |
| IEC 61508-6:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508) |
| ISO 20815:2008 | Petroleum, petrochemical and natural gas industries Production assurance and reliability management |
| IEC 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508) |
| ISO 23251:2006 | Petroleum, petrochemical and natural gas industries Pressure-relieving and depressuring systems |
| IEC 61508-7:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see Functional Safety and IEC 61508) |
| ISO 13702:2015 | Petroleum and natural gas industries — Control and mitigation of fires and explosions on offshore production installations — Requirements and guidelines |
| API 17O : 2014 | SUBSEA HIGH INTEGRITY PRESSURE PROTECTION SYSTEMS (HIPPS) |
| ISO 14723:2009 | Petroleum and natural gas industries — Pipeline transportation systems — Subsea pipeline valves |
| IEC 61508-2:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508) |
| ISO 14224:2016 | Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment |
| ISO 13623:2017 | Petroleum and natural gas industries — Pipeline transportation systems |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.