PREN 6111 : 200P1
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
AEROSPACE SERIES - ETHYLENE-PROPYLENE ELASTOMER (EPM/EPDM) - HARDNESS 80 IRHD FOR STATIC SEAL ELEMENTS IN HYDRAULIC SYSTEMS FOR LONG-TERM APPLICATION - MATERIAL STANDARD
Hardcopy , PDF
23-07-2013
English
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
2 Normative references
3 Requirements
3.1 General
3.2 Specific
3.2.1 Physical and mechanical requirements
3.2.2 Test specimens
3.2.3 Hazardous constituents
4 Designation
5 Technical specification
Describes the requirements of ethylene-propylene (EPM/EPDM) elastomer for seal elements for use in hydraulic systems using phosphate ester fluids, hardness 80 IRHD for long-term application for aerospace application.
| DocumentType |
Draft
|
| Pages |
6
|
| PublisherName |
Aerospace & Defence Industries Association of Europe
|
| Status |
Withdrawn
|
| I.S. EN 6076:2017 | AEROSPACE SERIES - STATIC SEAL ELEMENTS O-RING FOR STRAIGHT THREAD TUBE FITTING BOSS, ETHYLENE-PROPYLENE, MOULDED, PHOSPHATE ESTER RESISTANT (-55 DEGREES C TO 107 DEGREES C) - INCH SERIES |
| I.S. EN 6075:2017 | AEROSPACE SERIES - STATIC SEAL ELEMENTS O-RING ETHYLENE-PROPYLENE, MOULDED, PHOSPHATE ESTER RESISTANT (-55 DEGREES C TO 107 DEGREES C) - INCH SERIES |
| PREN 6076 : 200P2 | AEROSPACE SERIES - STATIC SEAL ELEMENTS O-RING FOR STRAIGHT THREAD TUBE FITTING BOSS, ETHYLENE-PROPYLENE, MOULDED, PHOSPHATE ESTER RESISTANT (-55 DEGREES C TO 107 DEGREES C) - INCH SERIES |
| BS EN 6075:2017 | Aerospace series. Static seal elements O-Ring ethylene- propylene, moulded, phosphate ester resistant (- 55 °C to 107 °C). Inch series |
| PREN 6086 : 200P1 | AEROSPACE SERIES - STATIC SEAL ELEMENTS SQUARE RING ETHYLENE-PROPYLENE, MOULDED, PHOSPHATE ESTER RESISTANT (-55 DEGREE C TO 107 DEGREE C) - INCH SERIESSERIES |
| BS EN 6076:2017 | Aerospace series. Static seal elements O-Ring for straight thread tube fitting boss, ethylene-propylene, moulded, phosphate ester resistant (-55 °C to 107 °C). Inch series |
| EN 6076:2017 | Aerospace series - Static seal elements O-Ring for straight thread tube fitting boss, ethylene-propylene, moulded, phosphate ester resistant (-55 °C to 107 °C) - Inch series |
| 14/30314163 DC : 0 | BS EN 6075 - AEROSPACE SERIES - STATIC SEAL ELEMENTS O-RING ETHYLENE-PROPYLENE, MOULDED, PHOSPHATE ESTER RESISTANT (-55 DEGREE C TO 107 DEGREE C) - INCH SERIES |
| 14/30314164 DC : 0 | BS EN 6076 - AEROSPACE SERIES - STATIC SEAL ELEMENTS O-RING STRAIGHT THREAD TUBE FITTING BOSS, ETHYLENE-PROPYLENE, MOULDED, PHOSPHATE ESTER RESISTANT (-55 DEGREE C TO 107 DEGREE C) - INCH SERIES |
| EN 6075:2017 | Aerospace series - Static seal elements O-Ring ethylene-propylene, moulded, phosphate ester resistant (- 55 °C to 107 °C) - Inch series |
| PREN 6075 : 200P2 | AEROSPACE SERIES - STATIC SEAL ELEMENTS O-RING ETHYLENE-PROPYLENE, MOULDED, PHOSPHATE ESTER RESISTANT (-55 DEGREES C TO 107 DEGREES C) - INCH SERIES |
| PREN 6075 : 200P2 | AEROSPACE SERIES - STATIC SEAL ELEMENTS O-RING ETHYLENE-PROPYLENE, MOULDED, PHOSPHATE ESTER RESISTANT (-55 DEGREES C TO 107 DEGREES C) - INCH SERIES |
| ASTM D 1414 : 2015 : REDLINE | Standard Test Methods for Rubber O-Rings |
| ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
| PREN 6109 : 200P2 | AEROSPACE SERIES - STATIC SEAL ELEMENTS ELASTOMER, MOULDED, PHOSPHATE ESTER RESISTANT - TECHNICAL SPECIFICATION |
| PREN 6076 : 200P2 | AEROSPACE SERIES - STATIC SEAL ELEMENTS O-RING FOR STRAIGHT THREAD TUBE FITTING BOSS, ETHYLENE-PROPYLENE, MOULDED, PHOSPHATE ESTER RESISTANT (-55 DEGREES C TO 107 DEGREES C) - INCH SERIES |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
| ISO 2781:2008 | Rubber, vulcanized or thermoplastic Determination of density |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.