PREN 6109 : 200P2
Current
Current
The latest, up-to-date edition.
AEROSPACE SERIES - STATIC SEAL ELEMENTS ELASTOMER, MOULDED, PHOSPHATE ESTER RESISTANT - TECHNICAL SPECIFICATION
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-03-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Quality assurance
6 Preparation for delivery
7 Storage and storage life
Annex A (informative) - Standard evolution form
Specifies the requirements for moulded elastomer seal elements for use in hydraulic systems using phosphate ester fluids for aerospace application.
| DocumentType |
Draft
|
| Pages |
15
|
| PublisherName |
Aerospace & Defence Industries Association of Europe
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN 6109:2018-02 (Draft) | Identical |
| I.S. EN 6075:2017 | AEROSPACE SERIES - STATIC SEAL ELEMENTS O-RING ETHYLENE-PROPYLENE, MOULDED, PHOSPHATE ESTER RESISTANT (-55 DEGREES C TO 107 DEGREES C) - INCH SERIES |
| PREN 6076 : 200P2 | AEROSPACE SERIES - STATIC SEAL ELEMENTS O-RING FOR STRAIGHT THREAD TUBE FITTING BOSS, ETHYLENE-PROPYLENE, MOULDED, PHOSPHATE ESTER RESISTANT (-55 DEGREES C TO 107 DEGREES C) - INCH SERIES |
| BS EN 6075:2017 | Aerospace series. Static seal elements O-Ring ethylene- propylene, moulded, phosphate ester resistant (- 55 °C to 107 °C). Inch series |
| I.S. EN 6076:2017 | AEROSPACE SERIES - STATIC SEAL ELEMENTS O-RING FOR STRAIGHT THREAD TUBE FITTING BOSS, ETHYLENE-PROPYLENE, MOULDED, PHOSPHATE ESTER RESISTANT (-55 DEGREES C TO 107 DEGREES C) - INCH SERIES |
| PREN 6086 : 200P1 | AEROSPACE SERIES - STATIC SEAL ELEMENTS SQUARE RING ETHYLENE-PROPYLENE, MOULDED, PHOSPHATE ESTER RESISTANT (-55 DEGREE C TO 107 DEGREE C) - INCH SERIESSERIES |
| BS EN 6076:2017 | Aerospace series. Static seal elements O-Ring for straight thread tube fitting boss, ethylene-propylene, moulded, phosphate ester resistant (-55 °C to 107 °C). Inch series |
| 13/30290592 DC : 0 | BS EN 6111 - AEROSPACE SERIES - ETHYLENE-PROPYLENE ELASTOMER (EPM/EPDM) HARDNESS 80 IRHD FOR STATIC SEAL ELEMENTS IN HYDRAULIC SYSTEMS FOR LONG-TERM APPLICATION - MATERIAL STANDARD |
| EN 6076:2017 | Aerospace series - Static seal elements O-Ring for straight thread tube fitting boss, ethylene-propylene, moulded, phosphate ester resistant (-55 °C to 107 °C) - Inch series |
| PREN 6111 : 200P1 | AEROSPACE SERIES - ETHYLENE-PROPYLENE ELASTOMER (EPM/EPDM) - HARDNESS 80 IRHD FOR STATIC SEAL ELEMENTS IN HYDRAULIC SYSTEMS FOR LONG-TERM APPLICATION - MATERIAL STANDARD |
| 14/30314163 DC : 0 | BS EN 6075 - AEROSPACE SERIES - STATIC SEAL ELEMENTS O-RING ETHYLENE-PROPYLENE, MOULDED, PHOSPHATE ESTER RESISTANT (-55 DEGREE C TO 107 DEGREE C) - INCH SERIES |
| 14/30314164 DC : 0 | BS EN 6076 - AEROSPACE SERIES - STATIC SEAL ELEMENTS O-RING STRAIGHT THREAD TUBE FITTING BOSS, ETHYLENE-PROPYLENE, MOULDED, PHOSPHATE ESTER RESISTANT (-55 DEGREE C TO 107 DEGREE C) - INCH SERIES |
| EN 6075:2017 | Aerospace series - Static seal elements O-Ring ethylene-propylene, moulded, phosphate ester resistant (- 55 °C to 107 °C) - Inch series |
| PREN 6075 : 200P2 | AEROSPACE SERIES - STATIC SEAL ELEMENTS O-RING ETHYLENE-PROPYLENE, MOULDED, PHOSPHATE ESTER RESISTANT (-55 DEGREES C TO 107 DEGREES C) - INCH SERIES |
| PREN 6075 : 200P2 | AEROSPACE SERIES - STATIC SEAL ELEMENTS O-RING ETHYLENE-PROPYLENE, MOULDED, PHOSPHATE ESTER RESISTANT (-55 DEGREES C TO 107 DEGREES C) - INCH SERIES |
| ISO 23529:2016 | Rubber General procedures for preparing and conditioning test pieces for physical test methods |
| EN 9102:2015 | Aerospace series - Quality systems - First article inspection requirements |
| ASTM D 1414 : 2015 : REDLINE | Standard Test Methods for Rubber O-Rings |
| ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| PREN 6076 : 200P2 | AEROSPACE SERIES - STATIC SEAL ELEMENTS O-RING FOR STRAIGHT THREAD TUBE FITTING BOSS, ETHYLENE-PROPYLENE, MOULDED, PHOSPHATE ESTER RESISTANT (-55 DEGREES C TO 107 DEGREES C) - INCH SERIES |
| ISO 3601-3:2005 | Fluid power systems O-rings Part 3: Quality acceptance criteria |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
| ISO 2781:2008 | Rubber, vulcanized or thermoplastic Determination of density |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.